| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.media; |
| |
| import android.util.Log; |
| import java.lang.ref.WeakReference; |
| import java.io.IOException; |
| import android.os.Handler; |
| import android.os.Looper; |
| import android.os.Message; |
| |
| /** |
| * The Visualizer class enables application to retrieve part of the currently playing audio for |
| * visualization purpose. It is not an audio recording interface and only returns partial and low |
| * quality audio content. However, to protect privacy of certain audio data (e.g voice mail) the use |
| * of the visualizer requires the permission android.permission.RECORD_AUDIO. |
| * <p>The audio session ID passed to the constructor indicates which audio content should be |
| * visualized:<br> |
| * <ul> |
| * <li>If the session is 0, the audio output mix is visualized</li> |
| * <li>If the session is not 0, the audio from a particular {@link MediaPlayer} or |
| * {@link AudioTrack} |
| * using this audio session is visualized </li> |
| * </ul> |
| * <p>Two types of representation of audio content can be captured: <br> |
| * <ul> |
| * <li>Waveform data: consecutive 8-bit (unsigned) mono samples by using the |
| * {@link #getWaveForm(byte[])} method</li> |
| * <li>Frequency data: 8-bit magnitude FFT by using the {@link #getFft(byte[])} method</li> |
| * </ul> |
| * <p>The length of the capture can be retrieved or specified by calling respectively |
| * {@link #getCaptureSize()} and {@link #setCaptureSize(int)} methods. Note that the size of the FFT |
| * is half of the specified capture size but both sides of the spectrum are returned yielding in a |
| * number of bytes equal to the capture size. The capture size must be a power of 2 in the range |
| * returned by {@link #getCaptureSizeRange()}. |
| * <p>In addition to the polling capture mode described above with {@link #getWaveForm(byte[])} and |
| * {@link #getFft(byte[])} methods, a callback mode is also available by installing a listener by |
| * use of the {@link #setDataCaptureListener(OnDataCaptureListener, int, boolean, boolean)} method. |
| * The rate at which the listener capture method is called as well as the type of data returned is |
| * specified. |
| * <p>Before capturing data, the Visualizer must be enabled by calling the |
| * {@link #setEnabled(boolean)} method. |
| * When data capture is not needed any more, the Visualizer should be disabled. |
| * <p>It is good practice to call the {@link #release()} method when the Visualizer is not used |
| * anymore to free up native resources associated to the Visualizer instance. |
| * |
| * {@hide Pending API council review} |
| */ |
| |
| public class Visualizer { |
| |
| static { |
| System.loadLibrary("audioeffect_jni"); |
| native_init(); |
| } |
| |
| private final static String TAG = "Visualizer-JAVA"; |
| |
| /** |
| * State of a Visualizer object that was not successfully initialized upon creation |
| */ |
| public static final int STATE_UNINITIALIZED = 0; |
| /** |
| * State of a Visualizer object that is ready to be used. |
| */ |
| public static final int STATE_INITIALIZED = 1; |
| /** |
| * State of a Visualizer object that is active. |
| */ |
| public static final int STATE_ENABLED = 2; |
| |
| // to keep in sync with frameworks/base/media/jni/audioeffect/android_media_Visualizer.cpp |
| protected static final int NATIVE_EVENT_PCM_CAPTURE = 0; |
| protected static final int NATIVE_EVENT_FFT_CAPTURE = 1; |
| |
| // Error codes: |
| /** |
| * Successful operation. |
| */ |
| public static final int SUCCESS = 0; |
| /** |
| * Unspecified error. |
| */ |
| public static final int ERROR = -1; |
| /** |
| * Internal opreation status. Not returned by any method. |
| */ |
| public static final int ALREADY_EXISTS = -2; |
| /** |
| * Operation failed due to bad object initialization. |
| */ |
| public static final int ERROR_NO_INIT = -3; |
| /** |
| * Operation failed due to bad parameter value. |
| */ |
| public static final int ERROR_BAD_VALUE = -4; |
| /** |
| * Operation failed because it was requested in wrong state. |
| */ |
| public static final int ERROR_INVALID_OPERATION = -5; |
| /** |
| * Operation failed due to lack of memory. |
| */ |
| public static final int ERROR_NO_MEMORY = -6; |
| /** |
| * Operation failed due to dead remote object. |
| */ |
| public static final int ERROR_DEAD_OBJECT = -7; |
| |
| //-------------------------------------------------------------------------- |
| // Member variables |
| //-------------------- |
| /** |
| * Indicates the state of the Visualizer instance |
| */ |
| protected int mState = STATE_UNINITIALIZED; |
| /** |
| * Lock to synchronize access to mState |
| */ |
| protected final Object mStateLock = new Object(); |
| /** |
| * System wide unique Identifier of the visualizer engine used by this Visualizer instance |
| */ |
| protected int mId; |
| |
| /** |
| * Lock to protect listeners updates against event notifications |
| */ |
| protected final Object mListenerLock = new Object(); |
| /** |
| * Handler for events coming from the native code |
| */ |
| protected NativeEventHandler mNativeEventHandler = null; |
| /** |
| * PCM and FFT capture listener registered by client |
| */ |
| protected OnDataCaptureListener mCaptureListener = null; |
| |
| // accessed by native methods |
| private int mNativeVisualizer; |
| private int mJniData; |
| |
| //-------------------------------------------------------------------------- |
| // Constructor, Finalize |
| //-------------------- |
| /** |
| * Class constructor. |
| * @param audioSession System wide unique audio session identifier. If audioSession |
| * is not 0, the visualizer will be attached to the MediaPlayer or AudioTrack in the |
| * same audio session. Otherwise, the Visualizer will apply to the output mix. |
| * |
| * @throws java.lang.UnsupportedOperationException |
| * @throws java.lang.RuntimeException |
| */ |
| |
| public Visualizer(int audioSession) |
| throws UnsupportedOperationException, RuntimeException { |
| int[] id = new int[1]; |
| |
| synchronized (mStateLock) { |
| mState = STATE_UNINITIALIZED; |
| // native initialization |
| int result = native_setup(new WeakReference<Visualizer>(this), audioSession, id); |
| if (result != SUCCESS && result != ALREADY_EXISTS) { |
| Log.e(TAG, "Error code "+result+" when initializing Visualizer."); |
| switch (result) { |
| case ERROR_INVALID_OPERATION: |
| throw (new UnsupportedOperationException("Effect library not loaded")); |
| default: |
| throw (new RuntimeException("Cannot initialize Visualizer engine, error: " |
| +result)); |
| } |
| } |
| mId = id[0]; |
| if (native_getEnabled()) { |
| mState = STATE_ENABLED; |
| } else { |
| mState = STATE_INITIALIZED; |
| } |
| } |
| } |
| |
| /** |
| * Releases the native Visualizer resources. It is a good practice to release the |
| * visualization engine when not in use. |
| */ |
| public void release() { |
| synchronized (mStateLock) { |
| native_release(); |
| mState = STATE_UNINITIALIZED; |
| } |
| } |
| |
| @Override |
| protected void finalize() { |
| native_finalize(); |
| } |
| |
| /** |
| * Enable or disable the visualization engine. |
| * @param enabled requested enable state |
| * @return {@link #SUCCESS} in case of success, |
| * {@link #ERROR_INVALID_OPERATION} or {@link #ERROR_DEAD_OBJECT} in case of failure. |
| * @throws IllegalStateException |
| */ |
| public int setEnabled(boolean enabled) |
| throws IllegalStateException { |
| synchronized (mStateLock) { |
| if ((enabled && mState != STATE_INITIALIZED) || |
| (!enabled && mState != STATE_ENABLED)) { |
| throw(new IllegalStateException("setEnabled() called in wrong state: "+mState)); |
| } |
| int status = native_setEnabled(enabled); |
| if (status == SUCCESS) { |
| mState = enabled ? STATE_ENABLED : STATE_INITIALIZED; |
| } |
| return status; |
| } |
| } |
| |
| /** |
| * Get current activation state of the visualizer. |
| * @return true if the visualizer is active, false otherwise |
| */ |
| public boolean getEnabled() |
| { |
| synchronized (mStateLock) { |
| if (mState == STATE_UNINITIALIZED) { |
| throw(new IllegalStateException("getEnabled() called in wrong state: "+mState)); |
| } |
| return native_getEnabled(); |
| } |
| } |
| |
| /** |
| * Returns the capture size range. |
| * @return the mininum capture size is returned in first array element and the maximum in second |
| * array element. |
| */ |
| public static native int[] getCaptureSizeRange(); |
| |
| /** |
| * Returns the maximum capture rate for the callback capture method. This is the maximum value |
| * for the rate parameter of the |
| * {@link #setDataCaptureListener(OnDataCaptureListener, int, boolean, boolean)} method. |
| * @return the maximum capture rate expressed in milliHertz |
| */ |
| public static native int getMaxCaptureRate(); |
| |
| /** |
| * Sets the capture size, i.e. the number of bytes returned by {@link #getWaveForm(byte[])} and |
| * {@link #getFft(byte[])} methods. The capture size must be a power of 2 in the range returned |
| * by {@link #getCaptureSizeRange()}. |
| * This method must not be called when the Visualizer is enabled. |
| * @param size requested capture size |
| * @return {@link #SUCCESS} in case of success, |
| * {@link #ERROR_BAD_VALUE} in case of failure. |
| * @throws IllegalStateException |
| */ |
| public int setCaptureSize(int size) |
| throws IllegalStateException { |
| synchronized (mStateLock) { |
| if (mState != STATE_INITIALIZED) { |
| throw(new IllegalStateException("setCaptureSize() called in wrong state: "+mState)); |
| } |
| return native_setCaptureSize(size); |
| } |
| } |
| |
| /** |
| * Returns current capture size. |
| * @return the capture size in bytes. |
| */ |
| public int getCaptureSize() |
| throws IllegalStateException { |
| synchronized (mStateLock) { |
| if (mState == STATE_UNINITIALIZED) { |
| throw(new IllegalStateException("getCaptureSize() called in wrong state: "+mState)); |
| } |
| return native_getCaptureSize(); |
| } |
| } |
| |
| /** |
| * Returns the sampling rate of the captured audio. |
| * @return the sampling rate in milliHertz. |
| */ |
| public int getSamplingRate() |
| throws IllegalStateException { |
| synchronized (mStateLock) { |
| if (mState == STATE_UNINITIALIZED) { |
| throw(new IllegalStateException("getSamplingRate() called in wrong state: "+mState)); |
| } |
| return native_getSamplingRate(); |
| } |
| } |
| |
| /** |
| * Returns a waveform capture of currently playing audio content. The capture consists in |
| * a number of consecutive 8-bit (unsigned) mono PCM samples equal to the capture size returned |
| * by {@link #getCaptureSize()}. |
| * <p>This method must be called when the Visualizer is enabled. |
| * @param waveform array of bytes where the waveform should be returned |
| * @return {@link #SUCCESS} in case of success, |
| * {@link #ERROR_NO_MEMORY}, {@link #ERROR_INVALID_OPERATION} or {@link #ERROR_DEAD_OBJECT} |
| * in case of failure. |
| * @throws IllegalStateException |
| */ |
| public int getWaveForm(byte[] waveform) |
| throws IllegalStateException { |
| synchronized (mStateLock) { |
| if (mState != STATE_ENABLED) { |
| throw(new IllegalStateException("getWaveForm() called in wrong state: "+mState)); |
| } |
| return native_getWaveForm(waveform); |
| } |
| } |
| /** |
| * Returns a frequency capture of currently playing audio content. The capture is a 8-bit |
| * magnitude FFT. Note that the size of the FFT is half of the specified capture size but both |
| * sides of the spectrum are returned yielding in a number of bytes equal to the capture size. |
| * {@see #getCaptureSize()}. |
| * <p>This method must be called when the Visualizer is enabled. |
| * @param fft array of bytes where the FFT should be returned |
| * @return {@link #SUCCESS} in case of success, |
| * {@link #ERROR_NO_MEMORY}, {@link #ERROR_INVALID_OPERATION} or {@link #ERROR_DEAD_OBJECT} |
| * in case of failure. |
| * @throws IllegalStateException |
| */ |
| public int getFft(byte[] fft) |
| throws IllegalStateException { |
| synchronized (mStateLock) { |
| if (mState != STATE_ENABLED) { |
| throw(new IllegalStateException("getFft() called in wrong state: "+mState)); |
| } |
| return native_getFft(fft); |
| } |
| } |
| |
| //--------------------------------------------------------- |
| // Interface definitions |
| //-------------------- |
| /** |
| * The OnDataCaptureListener interface defines methods called by the Visualizer to periodically |
| * update the audio visualization capture. |
| * The client application can implement this interface and register the listener with the |
| * {@link #setDataCaptureListener(OnDataCaptureListener, int, boolean, boolean)} method. |
| */ |
| public interface OnDataCaptureListener { |
| /** |
| * Method called when a new waveform capture is available. |
| * @param visualizer Visualizer object on which the listener is registered. |
| * @param waveform array of bytes containing the waveform representation. |
| * @param samplingRate sampling rate of the audio visualized. |
| */ |
| void onWaveFormDataCapture(Visualizer visualizer, byte[] waveform, int samplingRate); |
| |
| /** |
| * Method called when a new frequency capture is available. |
| * @param visualizer Visualizer object on which the listener is registered. |
| * @param fft array of bytes containing the frequency representation. |
| * @param samplingRate sampling rate of the audio visualized. |
| */ |
| void onFftDataCapture(Visualizer visualizer, byte[] fft, int samplingRate); |
| } |
| |
| /** |
| * Registers an OnDataCaptureListener interface and specifies the rate at which the capture |
| * should be updated as well as the type of capture requested. |
| * <p>Call this method with a null listener to stop receiving the capture updates. |
| * @param listener OnDataCaptureListener registered |
| * @param rate rate in milliHertz at which the capture should be updated |
| * @param waveform true if a waveform capture is requested: the onWaveFormDataCapture() |
| * method will be called on the OnDataCaptureListener interface. |
| * @param fft true if a frequency capture is requested: the onFftDataCapture() method will be |
| * called on the OnDataCaptureListener interface. |
| * @return {@link #SUCCESS} in case of success, |
| * {@link #ERROR_NO_INIT} or {@link #ERROR_BAD_VALUE} in case of failure. |
| */ |
| public int setDataCaptureListener(OnDataCaptureListener listener, |
| int rate, boolean waveform, boolean fft) { |
| synchronized (mListenerLock) { |
| mCaptureListener = listener; |
| } |
| if (listener == null) { |
| // make sure capture callback is stopped in native code |
| waveform = false; |
| fft = false; |
| } |
| int status = native_setPeriodicCapture(rate, waveform, fft); |
| if (status == SUCCESS) { |
| if ((listener != null) && (mNativeEventHandler == null)) { |
| Looper looper; |
| if ((looper = Looper.myLooper()) != null) { |
| mNativeEventHandler = new NativeEventHandler(this, looper); |
| } else if ((looper = Looper.getMainLooper()) != null) { |
| mNativeEventHandler = new NativeEventHandler(this, looper); |
| } else { |
| mNativeEventHandler = null; |
| status = ERROR_NO_INIT; |
| } |
| } |
| } |
| return status; |
| } |
| |
| /** |
| * Helper class to handle the forwarding of native events to the appropriate listeners |
| */ |
| private class NativeEventHandler extends Handler |
| { |
| private Visualizer mVisualizer; |
| |
| public NativeEventHandler(Visualizer v, Looper looper) { |
| super(looper); |
| mVisualizer = v; |
| } |
| |
| @Override |
| public void handleMessage(Message msg) { |
| if (mVisualizer == null) { |
| return; |
| } |
| OnDataCaptureListener l = null; |
| synchronized (mListenerLock) { |
| l = mVisualizer.mCaptureListener; |
| } |
| |
| if (l != null) { |
| byte[] data = (byte[])msg.obj; |
| int samplingRate = msg.arg1; |
| switch(msg.what) { |
| case NATIVE_EVENT_PCM_CAPTURE: |
| l.onWaveFormDataCapture(mVisualizer, data, samplingRate); |
| break; |
| case NATIVE_EVENT_FFT_CAPTURE: |
| l.onFftDataCapture(mVisualizer, data, samplingRate); |
| break; |
| default: |
| Log.e(TAG,"Unknown native event: "+msg.what); |
| break; |
| } |
| } |
| } |
| } |
| |
| //--------------------------------------------------------- |
| // Interface definitions |
| //-------------------- |
| |
| private static native final void native_init(); |
| |
| private native final int native_setup(Object audioeffect_this, |
| int audioSession, |
| int[] id); |
| |
| private native final void native_finalize(); |
| |
| private native final void native_release(); |
| |
| private native final int native_setEnabled(boolean enabled); |
| |
| private native final boolean native_getEnabled(); |
| |
| private native final int native_setCaptureSize(int size); |
| |
| private native final int native_getCaptureSize(); |
| |
| private native final int native_getSamplingRate(); |
| |
| private native final int native_getWaveForm(byte[] waveform); |
| |
| private native final int native_getFft(byte[] fft); |
| |
| private native final int native_setPeriodicCapture(int rate, boolean waveForm, boolean fft); |
| |
| //--------------------------------------------------------- |
| // Java methods called from the native side |
| //-------------------- |
| @SuppressWarnings("unused") |
| private static void postEventFromNative(Object effect_ref, |
| int what, int arg1, int arg2, Object obj) { |
| Visualizer visu = (Visualizer)((WeakReference)effect_ref).get(); |
| if (visu == null) { |
| return; |
| } |
| |
| if (visu.mNativeEventHandler != null) { |
| Message m = visu.mNativeEventHandler.obtainMessage(what, arg1, arg2, obj); |
| visu.mNativeEventHandler.sendMessage(m); |
| } |
| |
| } |
| |
| } |
| |