| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "VulkanManager.h" |
| |
| #include "DeviceInfo.h" |
| #include "Properties.h" |
| #include "RenderThread.h" |
| #include "renderstate/RenderState.h" |
| #include "utils/FatVector.h" |
| |
| #include <GrContext.h> |
| #include <GrTypes.h> |
| #include <vk/GrVkTypes.h> |
| |
| namespace android { |
| namespace uirenderer { |
| namespace renderthread { |
| |
| #define GET_PROC(F) m ## F = (PFN_vk ## F) vkGetInstanceProcAddr(instance, "vk" #F) |
| #define GET_DEV_PROC(F) m ## F = (PFN_vk ## F) vkGetDeviceProcAddr(device, "vk" #F) |
| |
| VulkanManager::VulkanManager(RenderThread& thread) : mRenderThread(thread) { |
| } |
| |
| void VulkanManager::destroy() { |
| if (!hasVkContext()) return; |
| |
| mRenderThread.renderState().onVkContextDestroyed(); |
| mRenderThread.setGrContext(nullptr); |
| |
| if (VK_NULL_HANDLE != mCommandPool) { |
| mDestroyCommandPool(mBackendContext->fDevice, mCommandPool, nullptr); |
| mCommandPool = VK_NULL_HANDLE; |
| } |
| mBackendContext.reset(); |
| } |
| |
| void VulkanManager::initialize() { |
| if (hasVkContext()) { return; } |
| |
| auto canPresent = [](VkInstance, VkPhysicalDevice, uint32_t) { return true; }; |
| |
| mBackendContext.reset(GrVkBackendContext::Create(&mPresentQueueIndex, canPresent)); |
| |
| // Get all the addresses of needed vulkan functions |
| VkInstance instance = mBackendContext->fInstance; |
| VkDevice device = mBackendContext->fDevice; |
| GET_PROC(CreateAndroidSurfaceKHR); |
| GET_PROC(DestroySurfaceKHR); |
| GET_PROC(GetPhysicalDeviceSurfaceSupportKHR); |
| GET_PROC(GetPhysicalDeviceSurfaceCapabilitiesKHR); |
| GET_PROC(GetPhysicalDeviceSurfaceFormatsKHR); |
| GET_PROC(GetPhysicalDeviceSurfacePresentModesKHR); |
| GET_DEV_PROC(CreateSwapchainKHR); |
| GET_DEV_PROC(DestroySwapchainKHR); |
| GET_DEV_PROC(GetSwapchainImagesKHR); |
| GET_DEV_PROC(AcquireNextImageKHR); |
| GET_DEV_PROC(QueuePresentKHR); |
| GET_DEV_PROC(CreateCommandPool); |
| GET_DEV_PROC(DestroyCommandPool); |
| GET_DEV_PROC(AllocateCommandBuffers); |
| GET_DEV_PROC(FreeCommandBuffers); |
| GET_DEV_PROC(ResetCommandBuffer); |
| GET_DEV_PROC(BeginCommandBuffer); |
| GET_DEV_PROC(EndCommandBuffer); |
| GET_DEV_PROC(CmdPipelineBarrier); |
| GET_DEV_PROC(GetDeviceQueue); |
| GET_DEV_PROC(QueueSubmit); |
| GET_DEV_PROC(QueueWaitIdle); |
| GET_DEV_PROC(DeviceWaitIdle); |
| GET_DEV_PROC(CreateSemaphore); |
| GET_DEV_PROC(DestroySemaphore); |
| GET_DEV_PROC(CreateFence); |
| GET_DEV_PROC(DestroyFence); |
| GET_DEV_PROC(WaitForFences); |
| GET_DEV_PROC(ResetFences); |
| |
| // create the command pool for the command buffers |
| if (VK_NULL_HANDLE == mCommandPool) { |
| VkCommandPoolCreateInfo commandPoolInfo; |
| memset(&commandPoolInfo, 0, sizeof(VkCommandPoolCreateInfo)); |
| commandPoolInfo.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO; |
| // this needs to be on the render queue |
| commandPoolInfo.queueFamilyIndex = mBackendContext->fGraphicsQueueIndex; |
| commandPoolInfo.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT; |
| SkDEBUGCODE(VkResult res =) mCreateCommandPool(mBackendContext->fDevice, |
| &commandPoolInfo, nullptr, &mCommandPool); |
| SkASSERT(VK_SUCCESS == res); |
| } |
| |
| mGetDeviceQueue(mBackendContext->fDevice, mPresentQueueIndex, 0, &mPresentQueue); |
| |
| mRenderThread.setGrContext(GrContext::Create(kVulkan_GrBackend, |
| (GrBackendContext) mBackendContext.get())); |
| DeviceInfo::initialize(mRenderThread.getGrContext()->caps()->maxRenderTargetSize()); |
| |
| if (Properties::enablePartialUpdates && Properties::useBufferAge) { |
| mSwapBehavior = SwapBehavior::BufferAge; |
| } |
| |
| mRenderThread.renderState().onVkContextCreated(); |
| } |
| |
| // Returns the next BackbufferInfo to use for the next draw. The function will make sure all |
| // previous uses have finished before returning. |
| VulkanSurface::BackbufferInfo* VulkanManager::getAvailableBackbuffer(VulkanSurface* surface) { |
| SkASSERT(surface->mBackbuffers); |
| |
| ++surface->mCurrentBackbufferIndex; |
| if (surface->mCurrentBackbufferIndex > surface->mImageCount) { |
| surface->mCurrentBackbufferIndex = 0; |
| } |
| |
| VulkanSurface::BackbufferInfo* backbuffer = surface->mBackbuffers + |
| surface->mCurrentBackbufferIndex; |
| |
| // Before we reuse a backbuffer, make sure its fences have all signaled so that we can safely |
| // reuse its commands buffers. |
| VkResult res = mWaitForFences(mBackendContext->fDevice, 2, backbuffer->mUsageFences, |
| true, UINT64_MAX); |
| if (res != VK_SUCCESS) { |
| return nullptr; |
| } |
| |
| return backbuffer; |
| } |
| |
| |
| SkSurface* VulkanManager::getBackbufferSurface(VulkanSurface* surface) { |
| VulkanSurface::BackbufferInfo* backbuffer = getAvailableBackbuffer(surface); |
| SkASSERT(backbuffer); |
| |
| VkResult res; |
| |
| res = mResetFences(mBackendContext->fDevice, 2, backbuffer->mUsageFences); |
| SkASSERT(VK_SUCCESS == res); |
| |
| // The acquire will signal the attached mAcquireSemaphore. We use this to know the image has |
| // finished presenting and that it is safe to begin sending new commands to the returned image. |
| res = mAcquireNextImageKHR(mBackendContext->fDevice, surface->mSwapchain, UINT64_MAX, |
| backbuffer->mAcquireSemaphore, VK_NULL_HANDLE, &backbuffer->mImageIndex); |
| |
| if (VK_ERROR_SURFACE_LOST_KHR == res) { |
| // need to figure out how to create a new vkSurface without the platformData* |
| // maybe use attach somehow? but need a Window |
| return nullptr; |
| } |
| if (VK_ERROR_OUT_OF_DATE_KHR == res) { |
| // tear swapchain down and try again |
| if (!createSwapchain(surface)) { |
| return nullptr; |
| } |
| backbuffer = getAvailableBackbuffer(surface); |
| res = mResetFences(mBackendContext->fDevice, 2, backbuffer->mUsageFences); |
| SkASSERT(VK_SUCCESS == res); |
| |
| // acquire the image |
| res = mAcquireNextImageKHR(mBackendContext->fDevice, surface->mSwapchain, UINT64_MAX, |
| backbuffer->mAcquireSemaphore, VK_NULL_HANDLE, &backbuffer->mImageIndex); |
| |
| if (VK_SUCCESS != res) { |
| return nullptr; |
| } |
| } |
| |
| // set up layout transfer from initial to color attachment |
| VkImageLayout layout = surface->mImageInfos[backbuffer->mImageIndex].mImageLayout; |
| SkASSERT(VK_IMAGE_LAYOUT_UNDEFINED == layout || VK_IMAGE_LAYOUT_PRESENT_SRC_KHR == layout); |
| VkPipelineStageFlags srcStageMask = (VK_IMAGE_LAYOUT_UNDEFINED == layout) ? |
| VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT : |
| VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT; |
| VkPipelineStageFlags dstStageMask = VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT; |
| VkAccessFlags srcAccessMask = (VK_IMAGE_LAYOUT_UNDEFINED == layout) ? |
| 0 : VK_ACCESS_MEMORY_READ_BIT; |
| VkAccessFlags dstAccessMask = VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT; |
| |
| VkImageMemoryBarrier imageMemoryBarrier = { |
| VK_STRUCTURE_TYPE_IMAGE_MEMORY_BARRIER, // sType |
| NULL, // pNext |
| srcAccessMask, // outputMask |
| dstAccessMask, // inputMask |
| layout, // oldLayout |
| VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL, // newLayout |
| mPresentQueueIndex, // srcQueueFamilyIndex |
| mBackendContext->fGraphicsQueueIndex, // dstQueueFamilyIndex |
| surface->mImages[backbuffer->mImageIndex], // image |
| { VK_IMAGE_ASPECT_COLOR_BIT, 0, 1, 0, 1 } // subresourceRange |
| }; |
| mResetCommandBuffer(backbuffer->mTransitionCmdBuffers[0], 0); |
| |
| VkCommandBufferBeginInfo info; |
| memset(&info, 0, sizeof(VkCommandBufferBeginInfo)); |
| info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO; |
| info.flags = 0; |
| mBeginCommandBuffer(backbuffer->mTransitionCmdBuffers[0], &info); |
| |
| mCmdPipelineBarrier(backbuffer->mTransitionCmdBuffers[0], srcStageMask, dstStageMask, 0, |
| 0, nullptr, 0, nullptr, 1, &imageMemoryBarrier); |
| |
| mEndCommandBuffer(backbuffer->mTransitionCmdBuffers[0]); |
| |
| VkPipelineStageFlags waitDstStageFlags = VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT; |
| // insert the layout transfer into the queue and wait on the acquire |
| VkSubmitInfo submitInfo; |
| memset(&submitInfo, 0, sizeof(VkSubmitInfo)); |
| submitInfo.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO; |
| submitInfo.waitSemaphoreCount = 1; |
| // Wait to make sure aquire semaphore set above has signaled. |
| submitInfo.pWaitSemaphores = &backbuffer->mAcquireSemaphore; |
| submitInfo.pWaitDstStageMask = &waitDstStageFlags; |
| submitInfo.commandBufferCount = 1; |
| submitInfo.pCommandBuffers = &backbuffer->mTransitionCmdBuffers[0]; |
| submitInfo.signalSemaphoreCount = 0; |
| |
| // Attach first fence to submission here so we can track when the command buffer finishes. |
| mQueueSubmit(mBackendContext->fQueue, 1, &submitInfo, backbuffer->mUsageFences[0]); |
| |
| // We need to notify Skia that we changed the layout of the wrapped VkImage |
| GrVkImageInfo* imageInfo; |
| sk_sp<SkSurface> skSurface = surface->mImageInfos[backbuffer->mImageIndex].mSurface; |
| skSurface->getRenderTargetHandle((GrBackendObject*)&imageInfo, |
| SkSurface::kFlushRead_BackendHandleAccess); |
| imageInfo->updateImageLayout(VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL); |
| |
| surface->mBackbuffer = std::move(skSurface); |
| return surface->mBackbuffer.get(); |
| } |
| |
| void VulkanManager::destroyBuffers(VulkanSurface* surface) { |
| if (surface->mBackbuffers) { |
| for (uint32_t i = 0; i < surface->mImageCount + 1; ++i) { |
| mWaitForFences(mBackendContext->fDevice, 2, surface->mBackbuffers[i].mUsageFences, true, |
| UINT64_MAX); |
| surface->mBackbuffers[i].mImageIndex = -1; |
| mDestroySemaphore(mBackendContext->fDevice, surface->mBackbuffers[i].mAcquireSemaphore, |
| nullptr); |
| mDestroySemaphore(mBackendContext->fDevice, surface->mBackbuffers[i].mRenderSemaphore, |
| nullptr); |
| mFreeCommandBuffers(mBackendContext->fDevice, mCommandPool, 2, |
| surface->mBackbuffers[i].mTransitionCmdBuffers); |
| mDestroyFence(mBackendContext->fDevice, surface->mBackbuffers[i].mUsageFences[0], 0); |
| mDestroyFence(mBackendContext->fDevice, surface->mBackbuffers[i].mUsageFences[1], 0); |
| } |
| } |
| |
| delete[] surface->mBackbuffers; |
| surface->mBackbuffers = nullptr; |
| delete[] surface->mImageInfos; |
| surface->mImageInfos = nullptr; |
| delete[] surface->mImages; |
| surface->mImages = nullptr; |
| } |
| |
| void VulkanManager::destroySurface(VulkanSurface* surface) { |
| // Make sure all submit commands have finished before starting to destroy objects. |
| if (VK_NULL_HANDLE != mPresentQueue) { |
| mQueueWaitIdle(mPresentQueue); |
| } |
| mDeviceWaitIdle(mBackendContext->fDevice); |
| |
| destroyBuffers(surface); |
| |
| if (VK_NULL_HANDLE != surface->mSwapchain) { |
| mDestroySwapchainKHR(mBackendContext->fDevice, surface->mSwapchain, nullptr); |
| surface->mSwapchain = VK_NULL_HANDLE; |
| } |
| |
| if (VK_NULL_HANDLE != surface->mVkSurface) { |
| mDestroySurfaceKHR(mBackendContext->fInstance, surface->mVkSurface, nullptr); |
| surface->mVkSurface = VK_NULL_HANDLE; |
| } |
| delete surface; |
| } |
| |
| void VulkanManager::createBuffers(VulkanSurface* surface, VkFormat format, VkExtent2D extent) { |
| mGetSwapchainImagesKHR(mBackendContext->fDevice, surface->mSwapchain, &surface->mImageCount, |
| nullptr); |
| SkASSERT(surface->mImageCount); |
| surface->mImages = new VkImage[surface->mImageCount]; |
| mGetSwapchainImagesKHR(mBackendContext->fDevice, surface->mSwapchain, |
| &surface->mImageCount, surface->mImages); |
| |
| SkSurfaceProps props(0, kUnknown_SkPixelGeometry); |
| |
| bool wantSRGB = VK_FORMAT_R8G8B8A8_SRGB == format; |
| GrPixelConfig config = wantSRGB ? kSRGBA_8888_GrPixelConfig : kRGBA_8888_GrPixelConfig; |
| |
| // set up initial image layouts and create surfaces |
| surface->mImageInfos = new VulkanSurface::ImageInfo[surface->mImageCount]; |
| for (uint32_t i = 0; i < surface->mImageCount; ++i) { |
| GrBackendRenderTargetDesc desc; |
| GrVkImageInfo info; |
| info.fImage = surface->mImages[i]; |
| info.fAlloc = { VK_NULL_HANDLE, 0, 0, 0 }; |
| info.fImageLayout = VK_IMAGE_LAYOUT_UNDEFINED; |
| info.fImageTiling = VK_IMAGE_TILING_OPTIMAL; |
| info.fFormat = format; |
| info.fLevelCount = 1; |
| |
| desc.fWidth = extent.width; |
| desc.fHeight = extent.height; |
| desc.fConfig = config; |
| desc.fOrigin = kTopLeft_GrSurfaceOrigin; |
| desc.fSampleCnt = 0; |
| desc.fStencilBits = 0; |
| desc.fRenderTargetHandle = (GrBackendObject) &info; |
| |
| VulkanSurface::ImageInfo& imageInfo = surface->mImageInfos[i]; |
| imageInfo.mSurface = SkSurface::MakeFromBackendRenderTarget(mRenderThread.getGrContext(), |
| desc, &props); |
| } |
| |
| SkASSERT(mCommandPool != VK_NULL_HANDLE); |
| |
| // set up the backbuffers |
| VkSemaphoreCreateInfo semaphoreInfo; |
| memset(&semaphoreInfo, 0, sizeof(VkSemaphoreCreateInfo)); |
| semaphoreInfo.sType = VK_STRUCTURE_TYPE_SEMAPHORE_CREATE_INFO; |
| semaphoreInfo.pNext = nullptr; |
| semaphoreInfo.flags = 0; |
| VkCommandBufferAllocateInfo commandBuffersInfo; |
| memset(&commandBuffersInfo, 0, sizeof(VkCommandBufferAllocateInfo)); |
| commandBuffersInfo.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO; |
| commandBuffersInfo.pNext = nullptr; |
| commandBuffersInfo.commandPool = mCommandPool; |
| commandBuffersInfo.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY; |
| commandBuffersInfo.commandBufferCount = 2; |
| VkFenceCreateInfo fenceInfo; |
| memset(&fenceInfo, 0, sizeof(VkFenceCreateInfo)); |
| fenceInfo.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO; |
| fenceInfo.pNext = nullptr; |
| fenceInfo.flags = VK_FENCE_CREATE_SIGNALED_BIT; |
| |
| // we create one additional backbuffer structure here, because we want to |
| // give the command buffers they contain a chance to finish before we cycle back |
| surface->mBackbuffers = new VulkanSurface::BackbufferInfo[surface->mImageCount + 1]; |
| for (uint32_t i = 0; i < surface->mImageCount + 1; ++i) { |
| SkDEBUGCODE(VkResult res); |
| surface->mBackbuffers[i].mImageIndex = -1; |
| SkDEBUGCODE(res = ) mCreateSemaphore(mBackendContext->fDevice, &semaphoreInfo, nullptr, |
| &surface->mBackbuffers[i].mAcquireSemaphore); |
| SkDEBUGCODE(res = ) mCreateSemaphore(mBackendContext->fDevice, &semaphoreInfo, nullptr, |
| &surface->mBackbuffers[i].mRenderSemaphore); |
| SkDEBUGCODE(res = ) mAllocateCommandBuffers(mBackendContext->fDevice, &commandBuffersInfo, |
| surface->mBackbuffers[i].mTransitionCmdBuffers); |
| SkDEBUGCODE(res = ) mCreateFence(mBackendContext->fDevice, &fenceInfo, nullptr, |
| &surface->mBackbuffers[i].mUsageFences[0]); |
| SkDEBUGCODE(res = ) mCreateFence(mBackendContext->fDevice, &fenceInfo, nullptr, |
| &surface->mBackbuffers[i].mUsageFences[1]); |
| SkASSERT(VK_SUCCESS == res); |
| } |
| surface->mCurrentBackbufferIndex = surface->mImageCount; |
| } |
| |
| bool VulkanManager::createSwapchain(VulkanSurface* surface) { |
| // check for capabilities |
| VkSurfaceCapabilitiesKHR caps; |
| VkResult res = mGetPhysicalDeviceSurfaceCapabilitiesKHR(mBackendContext->fPhysicalDevice, |
| surface->mVkSurface, &caps); |
| if (VK_SUCCESS != res) { |
| return false; |
| } |
| |
| uint32_t surfaceFormatCount; |
| res = mGetPhysicalDeviceSurfaceFormatsKHR(mBackendContext->fPhysicalDevice, surface->mVkSurface, |
| &surfaceFormatCount, nullptr); |
| if (VK_SUCCESS != res) { |
| return false; |
| } |
| |
| FatVector<VkSurfaceFormatKHR, 4> surfaceFormats(surfaceFormatCount); |
| res = mGetPhysicalDeviceSurfaceFormatsKHR(mBackendContext->fPhysicalDevice, surface->mVkSurface, |
| &surfaceFormatCount, surfaceFormats.data()); |
| if (VK_SUCCESS != res) { |
| return false; |
| } |
| |
| uint32_t presentModeCount; |
| res = mGetPhysicalDeviceSurfacePresentModesKHR(mBackendContext->fPhysicalDevice, |
| surface->mVkSurface, &presentModeCount, nullptr); |
| if (VK_SUCCESS != res) { |
| return false; |
| } |
| |
| FatVector<VkPresentModeKHR, VK_PRESENT_MODE_RANGE_SIZE_KHR> presentModes(presentModeCount); |
| res = mGetPhysicalDeviceSurfacePresentModesKHR(mBackendContext->fPhysicalDevice, |
| surface->mVkSurface, &presentModeCount, presentModes.data()); |
| if (VK_SUCCESS != res) { |
| return false; |
| } |
| |
| VkExtent2D extent = caps.currentExtent; |
| // clamp width; to handle currentExtent of -1 and protect us from broken hints |
| if (extent.width < caps.minImageExtent.width) { |
| extent.width = caps.minImageExtent.width; |
| } |
| SkASSERT(extent.width <= caps.maxImageExtent.width); |
| // clamp height |
| if (extent.height < caps.minImageExtent.height) { |
| extent.height = caps.minImageExtent.height; |
| } |
| SkASSERT(extent.height <= caps.maxImageExtent.height); |
| |
| uint32_t imageCount = caps.minImageCount + 2; |
| if (caps.maxImageCount > 0 && imageCount > caps.maxImageCount) { |
| // Application must settle for fewer images than desired: |
| imageCount = caps.maxImageCount; |
| } |
| |
| // Currently Skia requires the images to be color attchments and support all transfer |
| // operations. |
| VkImageUsageFlags usageFlags = VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT | |
| VK_IMAGE_USAGE_TRANSFER_SRC_BIT | |
| VK_IMAGE_USAGE_TRANSFER_DST_BIT; |
| SkASSERT((caps.supportedUsageFlags & usageFlags) == usageFlags); |
| SkASSERT(caps.supportedTransforms & caps.currentTransform); |
| SkASSERT(caps.supportedCompositeAlpha & (VK_COMPOSITE_ALPHA_OPAQUE_BIT_KHR | |
| VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR)); |
| VkCompositeAlphaFlagBitsKHR composite_alpha = |
| (caps.supportedCompositeAlpha & VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR) ? |
| VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR : |
| VK_COMPOSITE_ALPHA_OPAQUE_BIT_KHR; |
| |
| // Pick our surface format. For now, just make sure it matches our sRGB request: |
| VkFormat surfaceFormat = VK_FORMAT_UNDEFINED; |
| VkColorSpaceKHR colorSpace = VK_COLORSPACE_SRGB_NONLINEAR_KHR; |
| |
| bool wantSRGB = false; |
| #ifdef ANDROID_ENABLE_LINEAR_BLENDING |
| wantSRGB = true; |
| #endif |
| for (uint32_t i = 0; i < surfaceFormatCount; ++i) { |
| // We are assuming we can get either R8G8B8A8_UNORM or R8G8B8A8_SRGB |
| VkFormat desiredFormat = wantSRGB ? VK_FORMAT_R8G8B8A8_SRGB : VK_FORMAT_R8G8B8A8_UNORM; |
| if (desiredFormat == surfaceFormats[i].format) { |
| surfaceFormat = surfaceFormats[i].format; |
| colorSpace = surfaceFormats[i].colorSpace; |
| } |
| } |
| |
| if (VK_FORMAT_UNDEFINED == surfaceFormat) { |
| return false; |
| } |
| |
| // If mailbox mode is available, use it, as it is the lowest-latency non- |
| // tearing mode. If not, fall back to FIFO which is always available. |
| VkPresentModeKHR mode = VK_PRESENT_MODE_FIFO_KHR; |
| for (uint32_t i = 0; i < presentModeCount; ++i) { |
| // use mailbox |
| if (VK_PRESENT_MODE_MAILBOX_KHR == presentModes[i]) { |
| mode = presentModes[i]; |
| break; |
| } |
| } |
| |
| VkSwapchainCreateInfoKHR swapchainCreateInfo; |
| memset(&swapchainCreateInfo, 0, sizeof(VkSwapchainCreateInfoKHR)); |
| swapchainCreateInfo.sType = VK_STRUCTURE_TYPE_SWAPCHAIN_CREATE_INFO_KHR; |
| swapchainCreateInfo.surface = surface->mVkSurface; |
| swapchainCreateInfo.minImageCount = imageCount; |
| swapchainCreateInfo.imageFormat = surfaceFormat; |
| swapchainCreateInfo.imageColorSpace = colorSpace; |
| swapchainCreateInfo.imageExtent = extent; |
| swapchainCreateInfo.imageArrayLayers = 1; |
| swapchainCreateInfo.imageUsage = usageFlags; |
| |
| uint32_t queueFamilies[] = { mBackendContext->fGraphicsQueueIndex, mPresentQueueIndex }; |
| if (mBackendContext->fGraphicsQueueIndex != mPresentQueueIndex) { |
| swapchainCreateInfo.imageSharingMode = VK_SHARING_MODE_CONCURRENT; |
| swapchainCreateInfo.queueFamilyIndexCount = 2; |
| swapchainCreateInfo.pQueueFamilyIndices = queueFamilies; |
| } else { |
| swapchainCreateInfo.imageSharingMode = VK_SHARING_MODE_EXCLUSIVE; |
| swapchainCreateInfo.queueFamilyIndexCount = 0; |
| swapchainCreateInfo.pQueueFamilyIndices = nullptr; |
| } |
| |
| swapchainCreateInfo.preTransform = VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR; |
| swapchainCreateInfo.compositeAlpha = composite_alpha; |
| swapchainCreateInfo.presentMode = mode; |
| swapchainCreateInfo.clipped = true; |
| swapchainCreateInfo.oldSwapchain = surface->mSwapchain; |
| |
| res = mCreateSwapchainKHR(mBackendContext->fDevice, &swapchainCreateInfo, nullptr, |
| &surface->mSwapchain); |
| if (VK_SUCCESS != res) { |
| return false; |
| } |
| |
| // destroy the old swapchain |
| if (swapchainCreateInfo.oldSwapchain != VK_NULL_HANDLE) { |
| mDeviceWaitIdle(mBackendContext->fDevice); |
| |
| destroyBuffers(surface); |
| |
| mDestroySwapchainKHR(mBackendContext->fDevice, swapchainCreateInfo.oldSwapchain, nullptr); |
| } |
| |
| createBuffers(surface, surfaceFormat, extent); |
| |
| return true; |
| } |
| |
| |
| VulkanSurface* VulkanManager::createSurface(ANativeWindow* window) { |
| initialize(); |
| |
| if (!window) { |
| return nullptr; |
| } |
| |
| VulkanSurface* surface = new VulkanSurface(); |
| |
| VkAndroidSurfaceCreateInfoKHR surfaceCreateInfo; |
| memset(&surfaceCreateInfo, 0, sizeof(VkAndroidSurfaceCreateInfoKHR)); |
| surfaceCreateInfo.sType = VK_STRUCTURE_TYPE_ANDROID_SURFACE_CREATE_INFO_KHR; |
| surfaceCreateInfo.pNext = nullptr; |
| surfaceCreateInfo.flags = 0; |
| surfaceCreateInfo.window = window; |
| |
| VkResult res = mCreateAndroidSurfaceKHR(mBackendContext->fInstance, &surfaceCreateInfo, |
| nullptr, &surface->mVkSurface); |
| if (VK_SUCCESS != res) { |
| delete surface; |
| return nullptr; |
| } |
| |
| SkDEBUGCODE( |
| VkBool32 supported; |
| res = mGetPhysicalDeviceSurfaceSupportKHR(mBackendContext->fPhysicalDevice, |
| mPresentQueueIndex, surface->mVkSurface, &supported); |
| // All physical devices and queue families on Android must be capable of presentation with any |
| // native window. |
| SkASSERT(VK_SUCCESS == res && supported); |
| ); |
| |
| if (!createSwapchain(surface)) { |
| destroySurface(surface); |
| return nullptr; |
| } |
| |
| return surface; |
| } |
| |
| // Helper to know which src stage flags we need to set when transitioning to the present layout |
| static VkPipelineStageFlags layoutToPipelineStageFlags(const VkImageLayout layout) { |
| if (VK_IMAGE_LAYOUT_GENERAL == layout) { |
| return VK_PIPELINE_STAGE_ALL_COMMANDS_BIT; |
| } else if (VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL == layout || |
| VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL == layout) { |
| return VK_PIPELINE_STAGE_TRANSFER_BIT; |
| } else if (VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL == layout || |
| VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL == layout || |
| VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL == layout || |
| VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL == layout) { |
| return VK_PIPELINE_STAGE_ALL_GRAPHICS_BIT; |
| } else if (VK_IMAGE_LAYOUT_PREINITIALIZED == layout) { |
| return VK_PIPELINE_STAGE_HOST_BIT; |
| } |
| |
| SkASSERT(VK_IMAGE_LAYOUT_UNDEFINED == layout); |
| return VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT; |
| } |
| |
| // Helper to know which src access mask we need to set when transitioning to the present layout |
| static VkAccessFlags layoutToSrcAccessMask(const VkImageLayout layout) { |
| VkAccessFlags flags = 0; |
| if (VK_IMAGE_LAYOUT_GENERAL == layout) { |
| flags = VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT | |
| VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT | |
| VK_ACCESS_TRANSFER_WRITE_BIT | |
| VK_ACCESS_TRANSFER_READ_BIT | |
| VK_ACCESS_SHADER_READ_BIT | |
| VK_ACCESS_HOST_WRITE_BIT | VK_ACCESS_HOST_READ_BIT; |
| } else if (VK_IMAGE_LAYOUT_PREINITIALIZED == layout) { |
| flags = VK_ACCESS_HOST_WRITE_BIT; |
| } else if (VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL == layout) { |
| flags = VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT; |
| } else if (VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL == layout) { |
| flags = VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT; |
| } else if (VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL == layout) { |
| flags = VK_ACCESS_TRANSFER_WRITE_BIT; |
| } else if (VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL == layout) { |
| flags = VK_ACCESS_TRANSFER_READ_BIT; |
| } else if (VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL == layout) { |
| flags = VK_ACCESS_SHADER_READ_BIT; |
| } |
| return flags; |
| } |
| |
| void VulkanManager::swapBuffers(VulkanSurface* surface) { |
| if (CC_UNLIKELY(Properties::waitForGpuCompletion)) { |
| ATRACE_NAME("Finishing GPU work"); |
| mDeviceWaitIdle(mBackendContext->fDevice); |
| } |
| |
| VulkanSurface::BackbufferInfo* backbuffer = surface->mBackbuffers + |
| surface->mCurrentBackbufferIndex; |
| GrVkImageInfo* imageInfo; |
| SkSurface* skSurface = surface->mImageInfos[backbuffer->mImageIndex].mSurface.get(); |
| skSurface->getRenderTargetHandle((GrBackendObject*)&imageInfo, |
| SkSurface::kFlushRead_BackendHandleAccess); |
| // Check to make sure we never change the actually wrapped image |
| SkASSERT(imageInfo->fImage == surface->mImages[backbuffer->mImageIndex]); |
| |
| // We need to transition the image to VK_IMAGE_LAYOUT_PRESENT_SRC_KHR and make sure that all |
| // previous work is complete for before presenting. So we first add the necessary barrier here. |
| VkImageLayout layout = imageInfo->fImageLayout; |
| VkPipelineStageFlags srcStageMask = layoutToPipelineStageFlags(layout); |
| VkPipelineStageFlags dstStageMask = VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT; |
| VkAccessFlags srcAccessMask = layoutToSrcAccessMask(layout); |
| VkAccessFlags dstAccessMask = VK_ACCESS_MEMORY_READ_BIT; |
| |
| VkImageMemoryBarrier imageMemoryBarrier = { |
| VK_STRUCTURE_TYPE_IMAGE_MEMORY_BARRIER, // sType |
| NULL, // pNext |
| srcAccessMask, // outputMask |
| dstAccessMask, // inputMask |
| layout, // oldLayout |
| VK_IMAGE_LAYOUT_PRESENT_SRC_KHR, // newLayout |
| mBackendContext->fGraphicsQueueIndex, // srcQueueFamilyIndex |
| mPresentQueueIndex, // dstQueueFamilyIndex |
| surface->mImages[backbuffer->mImageIndex], // image |
| { VK_IMAGE_ASPECT_COLOR_BIT, 0, 1, 0, 1 } // subresourceRange |
| }; |
| |
| mResetCommandBuffer(backbuffer->mTransitionCmdBuffers[1], 0); |
| VkCommandBufferBeginInfo info; |
| memset(&info, 0, sizeof(VkCommandBufferBeginInfo)); |
| info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO; |
| info.flags = 0; |
| mBeginCommandBuffer(backbuffer->mTransitionCmdBuffers[1], &info); |
| mCmdPipelineBarrier(backbuffer->mTransitionCmdBuffers[1], srcStageMask, dstStageMask, 0, |
| 0, nullptr, 0, nullptr, 1, &imageMemoryBarrier); |
| mEndCommandBuffer(backbuffer->mTransitionCmdBuffers[1]); |
| |
| surface->mImageInfos[backbuffer->mImageIndex].mImageLayout = VK_IMAGE_LAYOUT_PRESENT_SRC_KHR; |
| |
| // insert the layout transfer into the queue and wait on the acquire |
| VkSubmitInfo submitInfo; |
| memset(&submitInfo, 0, sizeof(VkSubmitInfo)); |
| submitInfo.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO; |
| submitInfo.waitSemaphoreCount = 0; |
| submitInfo.pWaitDstStageMask = 0; |
| submitInfo.commandBufferCount = 1; |
| submitInfo.pCommandBuffers = &backbuffer->mTransitionCmdBuffers[1]; |
| submitInfo.signalSemaphoreCount = 1; |
| // When this command buffer finishes we will signal this semaphore so that we know it is now |
| // safe to present the image to the screen. |
| submitInfo.pSignalSemaphores = &backbuffer->mRenderSemaphore; |
| |
| // Attach second fence to submission here so we can track when the command buffer finishes. |
| mQueueSubmit(mBackendContext->fQueue, 1, &submitInfo, backbuffer->mUsageFences[1]); |
| |
| // Submit present operation to present queue. We use a semaphore here to make sure all rendering |
| // to the image is complete and that the layout has been change to present on the graphics |
| // queue. |
| const VkPresentInfoKHR presentInfo = |
| { |
| VK_STRUCTURE_TYPE_PRESENT_INFO_KHR, // sType |
| NULL, // pNext |
| 1, // waitSemaphoreCount |
| &backbuffer->mRenderSemaphore, // pWaitSemaphores |
| 1, // swapchainCount |
| &surface->mSwapchain, // pSwapchains |
| &backbuffer->mImageIndex, // pImageIndices |
| NULL // pResults |
| }; |
| |
| mQueuePresentKHR(mPresentQueue, &presentInfo); |
| |
| surface->mBackbuffer.reset(); |
| surface->mImageInfos[backbuffer->mImageIndex].mLastUsed = surface->mCurrentTime; |
| surface->mImageInfos[backbuffer->mImageIndex].mInvalid = false; |
| surface->mCurrentTime++; |
| } |
| |
| int VulkanManager::getAge(VulkanSurface* surface) { |
| VulkanSurface::BackbufferInfo* backbuffer = surface->mBackbuffers + |
| surface->mCurrentBackbufferIndex; |
| if (mSwapBehavior == SwapBehavior::Discard |
| || surface->mImageInfos[backbuffer->mImageIndex].mInvalid) { |
| return 0; |
| } |
| uint16_t lastUsed = surface->mImageInfos[backbuffer->mImageIndex].mLastUsed; |
| return surface->mCurrentTime - lastUsed; |
| } |
| |
| } /* namespace renderthread */ |
| } /* namespace uirenderer */ |
| } /* namespace android */ |
