| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| package com.android.internal.telephony; |
| |
| /** |
| * @hide |
| */ |
| public class PhoneConstants { |
| |
| /** |
| * The phone state. One of the following:<p> |
| * <ul> |
| * <li>IDLE = no phone activity</li> |
| * <li>RINGING = a phone call is ringing or call waiting. |
| * In the latter case, another call is active as well</li> |
| * <li>OFFHOOK = The phone is off hook. At least one call |
| * exists that is dialing, active or holding and no calls are |
| * ringing or waiting.</li> |
| * </ul> |
| */ |
| public enum State { |
| IDLE, RINGING, OFFHOOK; |
| }; |
| |
| /** |
| * The state of a data connection. |
| * <ul> |
| * <li>CONNECTED = IP traffic should be available</li> |
| * <li>CONNECTING = Currently setting up data connection</li> |
| * <li>DISCONNECTED = IP not available</li> |
| * <li>SUSPENDED = connection is created but IP traffic is |
| * temperately not available. i.e. voice call is in place |
| * in 2G network</li> |
| * </ul> |
| */ |
| public enum DataState { |
| CONNECTED, CONNECTING, DISCONNECTED, SUSPENDED; |
| }; |
| |
| public static final String STATE_KEY = "state"; |
| |
| // Radio Type |
| public static final int PHONE_TYPE_NONE = RILConstants.NO_PHONE; |
| public static final int PHONE_TYPE_GSM = RILConstants.GSM_PHONE; |
| public static final int PHONE_TYPE_CDMA = RILConstants.CDMA_PHONE; |
| public static final int PHONE_TYPE_SIP = RILConstants.SIP_PHONE; |
| public static final int PHONE_TYPE_THIRD_PARTY = RILConstants.THIRD_PARTY_PHONE; |
| public static final int PHONE_TYPE_IMS = RILConstants.IMS_PHONE; |
| // Currently this is used only to differentiate CDMA and CDMALTE Phone in GsmCdma* files. For |
| // anything outside of that, a cdma + lte phone is still CDMA_PHONE |
| public static final int PHONE_TYPE_CDMA_LTE = RILConstants.CDMA_LTE_PHONE; |
| |
| // Modes for LTE_ON_CDMA |
| public static final int LTE_ON_CDMA_UNKNOWN = RILConstants.LTE_ON_CDMA_UNKNOWN; |
| public static final int LTE_ON_CDMA_FALSE = RILConstants.LTE_ON_CDMA_FALSE; |
| public static final int LTE_ON_CDMA_TRUE = RILConstants.LTE_ON_CDMA_TRUE; |
| |
| // Number presentation type for caller id display (From internal/Connection.java) |
| public static final int PRESENTATION_ALLOWED = 1; // normal |
| public static final int PRESENTATION_RESTRICTED = 2; // block by user |
| public static final int PRESENTATION_UNKNOWN = 3; // no specified or unknown by network |
| public static final int PRESENTATION_PAYPHONE = 4; // show pay phone info |
| |
| // Sim activation type |
| public static final int SIM_ACTIVATION_TYPE_VOICE = 0; |
| public static final int SIM_ACTIVATION_TYPE_DATA = 1; |
| |
| public static final String PHONE_NAME_KEY = "phoneName"; |
| public static final String FAILURE_REASON_KEY = "reason"; |
| public static final String STATE_CHANGE_REASON_KEY = "reason"; |
| public static final String DATA_NETWORK_TYPE_KEY = "networkType"; |
| public static final String DATA_FAILURE_CAUSE_KEY = "failCause"; |
| public static final String DATA_APN_TYPE_KEY = "apnType"; |
| public static final String DATA_APN_KEY = "apn"; |
| public static final String DATA_LINK_PROPERTIES_KEY = "linkProperties"; |
| public static final String DATA_NETWORK_CAPABILITIES_KEY = "networkCapabilities"; |
| |
| public static final String DATA_IFACE_NAME_KEY = "iface"; |
| public static final String NETWORK_UNAVAILABLE_KEY = "networkUnvailable"; |
| public static final String DATA_NETWORK_ROAMING_KEY = "networkRoaming"; |
| public static final String PHONE_IN_ECM_STATE = "phoneinECMState"; |
| public static final String PHONE_IN_EMERGENCY_CALL = "phoneInEmergencyCall"; |
| |
| public static final String REASON_LINK_PROPERTIES_CHANGED = "linkPropertiesChanged"; |
| |
| /** |
| * Return codes for supplyPinReturnResult and |
| * supplyPukReturnResult APIs |
| */ |
| public static final int PIN_RESULT_SUCCESS = 0; |
| public static final int PIN_PASSWORD_INCORRECT = 1; |
| public static final int PIN_GENERAL_FAILURE = 2; |
| |
| /** |
| * Return codes for <code>enableApnType()</code> |
| */ |
| public static final int APN_ALREADY_ACTIVE = 0; |
| public static final int APN_REQUEST_STARTED = 1; |
| public static final int APN_TYPE_NOT_AVAILABLE = 2; |
| public static final int APN_REQUEST_FAILED = 3; |
| public static final int APN_ALREADY_INACTIVE = 4; |
| |
| /** |
| * APN types for data connections. These are usage categories for an APN |
| * entry. One APN entry may support multiple APN types, eg, a single APN |
| * may service regular internet traffic ("default") as well as MMS-specific |
| * connections.<br/> |
| * APN_TYPE_ALL is a special type to indicate that this APN entry can |
| * service all data connections. |
| */ |
| public static final String APN_TYPE_ALL = "*"; |
| /** APN type for default data traffic */ |
| public static final String APN_TYPE_DEFAULT = "default"; |
| /** APN type for MMS traffic */ |
| public static final String APN_TYPE_MMS = "mms"; |
| /** APN type for SUPL assisted GPS */ |
| public static final String APN_TYPE_SUPL = "supl"; |
| /** APN type for DUN traffic */ |
| public static final String APN_TYPE_DUN = "dun"; |
| /** APN type for HiPri traffic */ |
| public static final String APN_TYPE_HIPRI = "hipri"; |
| /** APN type for FOTA */ |
| public static final String APN_TYPE_FOTA = "fota"; |
| /** APN type for IMS */ |
| public static final String APN_TYPE_IMS = "ims"; |
| /** APN type for CBS */ |
| public static final String APN_TYPE_CBS = "cbs"; |
| /** APN type for IA Initial Attach APN */ |
| public static final String APN_TYPE_IA = "ia"; |
| /** APN type for Emergency PDN. This is not an IA apn, but is used |
| * for access to carrier services in an emergency call situation. */ |
| public static final String APN_TYPE_EMERGENCY = "emergency"; |
| /** Array of all APN types */ |
| public static final String[] APN_TYPES = {APN_TYPE_DEFAULT, |
| APN_TYPE_MMS, |
| APN_TYPE_SUPL, |
| APN_TYPE_DUN, |
| APN_TYPE_HIPRI, |
| APN_TYPE_FOTA, |
| APN_TYPE_IMS, |
| APN_TYPE_CBS, |
| APN_TYPE_IA, |
| APN_TYPE_EMERGENCY |
| }; |
| |
| public static final int RIL_CARD_MAX_APPS = 8; |
| |
| public static final int DEFAULT_CARD_INDEX = 0; |
| |
| public static final int MAX_PHONE_COUNT_SINGLE_SIM = 1; |
| |
| public static final int MAX_PHONE_COUNT_DUAL_SIM = 2; |
| |
| public static final int MAX_PHONE_COUNT_TRI_SIM = 3; |
| |
| public static final String PHONE_KEY = "phone"; |
| |
| public static final String SLOT_KEY = "slot"; |
| |
| /** Fired when a subscriptions phone state changes. */ |
| public static final String ACTION_SUBSCRIPTION_PHONE_STATE_CHANGED = |
| "android.intent.action.SUBSCRIPTION_PHONE_STATE"; |
| |
| // FIXME: This is used to pass a subId via intents, we need to look at its usage, which is |
| // FIXME: extensive, and see if this should be an array of all active subId's or ...? |
| public static final String SUBSCRIPTION_KEY = "subscription"; |
| |
| public static final String SUB_SETTING = "subSettings"; |
| |
| public static final int SUB1 = 0; |
| public static final int SUB2 = 1; |
| public static final int SUB3 = 2; |
| |
| // TODO: Remove these constants and use an int instead. |
| public static final int SIM_ID_1 = 0; |
| public static final int SIM_ID_2 = 1; |
| public static final int SIM_ID_3 = 2; |
| public static final int SIM_ID_4 = 3; |
| |
| // ICC SIM Application Types |
| // TODO: Replace the IccCardApplicationStatus.AppType enums with these constants |
| public static final int APPTYPE_UNKNOWN = 0; |
| public static final int APPTYPE_SIM = 1; |
| public static final int APPTYPE_USIM = 2; |
| public static final int APPTYPE_RUIM = 3; |
| public static final int APPTYPE_CSIM = 4; |
| public static final int APPTYPE_ISIM = 5; |
| |
| public enum CardUnavailableReason { |
| REASON_CARD_REMOVED, |
| REASON_RADIO_UNAVAILABLE, |
| REASON_SIM_REFRESH_RESET |
| }; |
| |
| // Initial MTU value. |
| public static final int UNSET_MTU = 0; |
| |
| //FIXME maybe this shouldn't be here - sprout only |
| public static final int CAPABILITY_3G = 1; |
| |
| /** |
| * Values for the adb property "persist.radio.videocall.audio.output" |
| */ |
| public static final int AUDIO_OUTPUT_ENABLE_SPEAKER = 0; |
| public static final int AUDIO_OUTPUT_DISABLE_SPEAKER = 1; |
| public static final int AUDIO_OUTPUT_DEFAULT = AUDIO_OUTPUT_ENABLE_SPEAKER; |
| |
| // authContext (parameter P2) when doing SIM challenge, |
| // per 3GPP TS 31.102 (Section 7.1.2) |
| public static final int AUTH_CONTEXT_EAP_SIM = 128; |
| public static final int AUTH_CONTEXT_EAP_AKA = 129; |
| public static final int AUTH_CONTEXT_UNDEFINED = -1; |
| |
| /** |
| * Value for the global property CELL_ON |
| * 0: Cell radio is off |
| * 1: Cell radio is on |
| * 2: Cell radio is off because airplane mode is enabled |
| */ |
| public static final int CELL_OFF_FLAG = 0; |
| public static final int CELL_ON_FLAG = 1; |
| public static final int CELL_OFF_DUE_TO_AIRPLANE_MODE_FLAG = 2; |
| } |
