packages/SystemUI/res/values/tiles_states_strings.xml

<!--
  ~ Copyright (C) 2021 The Android Open Source Project
  ~
  ~ Licensed under the Apache License, Version 2.0 (the "License");
  ~ you may not use this file except in compliance with the License.
  ~ You may obtain a copy of the License at
  ~
  ~      http://www.apache.org/licenses/LICENSE-2.0
  ~
  ~ Unless required by applicable law or agreed to in writing, software
  ~ distributed under the License is distributed on an "AS IS" BASIS,
  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  ~ See the License for the specific language governing permissions and
  ~ limitations under the License.
  -->

<!-- This resources set the default subtitle for tiles. This way, each tile can be translated
     separately.
     The indices in the array correspond to the state values in QSTile:
      * STATE_UNAVAILABLE
      * STATE_INACTIVE
      * STATE_ACTIVE
     This subtitle is shown when the tile is in that particular state but does not set its own
     subtitle, so some of these may never appear on screen. They should still be translated as if
     they could appear.
-->
<resources>
    <!-- Default names for tiles states: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_default">
        <item>@string/tile_unavailable</item>
        <item>@string/switch_bar_off</item>
        <item>@string/switch_bar_on</item>
    </string-array>

    <!-- State names for internet tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_internet">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for wifi tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_wifi">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for cell (data) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear.[CHAR LIMIT=32] -->
    <string-array name="tile_states_cell">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for battery (saver) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_battery">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for dnd (Do not disturb) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_dnd">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for flashlight tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_flashlight">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for rotation (lock) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_rotation">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for bt (bluetooth) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_bt">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for airplane tile: unavailable, off, on [CHAR LIMIT=32] -->
    <string-array name="tile_states_airplane">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for location tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_location">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for hotspot tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_hotspot">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for color correction tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_color_correction">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for (color) inversion tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_inversion">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for (data) saver tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_saver">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for dark (mode) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_dark">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for work (mode) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_work">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for cast tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_cast">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for night (light) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_night">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for screenrecord tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_screenrecord">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for reverse (charging) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_reverse">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for reduce_brightness tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_reduce_brightness">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for cameratoggle tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear.[CHAR LIMIT=32] -->
    <string-array name="tile_states_cameratoggle">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for mictoggle tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_mictoggle">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for (home) controls tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_controls">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for (quick access) wallet tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_wallet">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for qr code scanner tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_qr_code_scanner">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for alarm tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_alarm">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for One-handed mode tile: unavailable, off, on [CHAR LIMIT=32] -->
    <string-array name="tile_states_onehanded">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>

    <!-- State names for dream (screensaver) tile: unavailable, off, on.
         This subtitle is shown when the tile is in that particular state but does not set its own
         subtitle, so some of these may never appear on screen. They should still be translated as
         if they could appear. [CHAR LIMIT=32] -->
    <string-array name="tile_states_dream">
        <item>Unavailable</item>
        <item>Off</item>
        <item>On</item>
    </string-array>
</resources>