| <!-- |
| ~ Copyright (C) 2021 The Android Open Source Project |
| ~ |
| ~ Licensed under the Apache License, Version 2.0 (the "License"); |
| ~ you may not use this file except in compliance with the License. |
| ~ You may obtain a copy of the License at |
| ~ |
| ~ http://www.apache.org/licenses/LICENSE-2.0 |
| ~ |
| ~ Unless required by applicable law or agreed to in writing, software |
| ~ distributed under the License is distributed on an "AS IS" BASIS, |
| ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ~ See the License for the specific language governing permissions and |
| ~ limitations under the License. |
| --> |
| |
| <!-- This resources set the default subtitle for tiles. This way, each tile can be translated |
| separately. |
| The indices in the array correspond to the state values in QSTile: |
| * STATE_UNAVAILABLE |
| * STATE_INACTIVE |
| * STATE_ACTIVE |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as if |
| they could appear. |
| --> |
| <resources> |
| <!-- Default names for tiles states: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_default"> |
| <item>@string/tile_unavailable</item> |
| <item>@string/switch_bar_off</item> |
| <item>@string/switch_bar_on</item> |
| </string-array> |
| |
| <!-- State names for internet tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_internet"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for wifi tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_wifi"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for cell (data) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear.[CHAR LIMIT=32] --> |
| <string-array name="tile_states_cell"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for battery (saver) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_battery"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for dnd (Do not disturb) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_dnd"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for flashlight tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_flashlight"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for rotation (lock) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_rotation"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for bt (bluetooth) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_bt"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for airplane tile: unavailable, off, on [CHAR LIMIT=32] --> |
| <string-array name="tile_states_airplane"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for location tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_location"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for hotspot tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_hotspot"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for color correction tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_color_correction"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for (color) inversion tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_inversion"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for (data) saver tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_saver"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for dark (mode) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_dark"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for work (mode) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_work"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for cast tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_cast"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for night (light) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_night"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for screenrecord tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_screenrecord"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for reverse (charging) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_reverse"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for reduce_brightness tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_reduce_brightness"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for cameratoggle tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear.[CHAR LIMIT=32] --> |
| <string-array name="tile_states_cameratoggle"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for mictoggle tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_mictoggle"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for (home) controls tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_controls"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for (quick access) wallet tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_wallet"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for qr code scanner tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_qr_code_scanner"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for alarm tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_alarm"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for One-handed mode tile: unavailable, off, on [CHAR LIMIT=32] --> |
| <string-array name="tile_states_onehanded"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| |
| <!-- State names for dream (screensaver) tile: unavailable, off, on. |
| This subtitle is shown when the tile is in that particular state but does not set its own |
| subtitle, so some of these may never appear on screen. They should still be translated as |
| if they could appear. [CHAR LIMIT=32] --> |
| <string-array name="tile_states_dream"> |
| <item>Unavailable</item> |
| <item>Off</item> |
| <item>On</item> |
| </string-array> |
| </resources> |