| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| Copyright (C) 2020 The Android Open Source Project |
| |
| Licensed under the Apache License, Version 2.0 (the "License"); |
| you may not use this file except in compliance with the License. |
| You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| <resources> |
| <dimen name="dismiss_circle_size">96dp</dimen> |
| <dimen name="dismiss_circle_small">60dp</dimen> |
| |
| <!-- The height of the gradient indicating the dismiss edge when moving a PIP. --> |
| <dimen name="floating_dismiss_gradient_height">250dp</dimen> |
| |
| <!-- The padding around a PiP actions. --> |
| <dimen name="pip_action_padding">16dp</dimen> |
| |
| <!-- The height of the PiP actions container in which the actions are vertically centered. --> |
| <dimen name="pip_action_size">48dp</dimen> |
| |
| <!-- The width and height of the PiP action asset drawn within the container. --> |
| <dimen name="pip_action_inner_size">20dp</dimen> |
| |
| <!-- The width and height of the PiP expand action container. --> |
| <dimen name="pip_expand_action_size">60dp</dimen> |
| |
| <!-- The width and height of the PiP expand action asset drawn within the container. --> |
| <dimen name="pip_expand_action_inner_size">28dp</dimen> |
| |
| <!-- The padding between actions in the PiP in landscape Note that the PiP does not reflect |
| the configuration of the device, so we can't use -land resources. --> |
| <dimen name="pip_between_action_padding_land">8dp</dimen> |
| |
| <!-- The buffer to use when calculating whether the pip is in an adjust zone. --> |
| <dimen name="pip_bottom_offset_buffer">1dp</dimen> |
| |
| <!-- The corner radius for PiP window. --> |
| <dimen name="pip_corner_radius">16dp</dimen> |
| |
| <!-- The bottom margin of the PIP drag to dismiss info text shown when moving a PIP. --> |
| <dimen name="pip_dismiss_text_bottom_margin">24dp</dimen> |
| |
| <!-- The bottom margin of the expand container when there are actions. |
| Equal to pip_action_size - pip_action_padding. --> |
| <dimen name="pip_expand_container_edge_margin">30dp</dimen> |
| |
| <!-- The shortest-edge size of the expanded PiP. --> |
| <dimen name="pip_expanded_shortest_edge_size">160dp</dimen> |
| |
| <!-- The additional offset to apply to the IME animation to account for the input field. --> |
| <dimen name="pip_ime_offset">48dp</dimen> |
| |
| <!-- The touchable/draggable edge size for PIP resize. --> |
| <dimen name="pip_resize_edge_size">48dp</dimen> |
| |
| <!-- PIP Resize handle size, margin and padding. --> |
| <dimen name="pip_resize_handle_size">12dp</dimen> |
| <dimen name="pip_resize_handle_margin">4dp</dimen> |
| <dimen name="pip_resize_handle_padding">0dp</dimen> |
| |
| <!-- PIP stash offset size, which is the width of visible PIP region when stashed. --> |
| <dimen name="pip_stash_offset">32dp</dimen> |
| |
| <dimen name="dismiss_target_x_size">24dp</dimen> |
| <dimen name="floating_dismiss_bottom_margin">50dp</dimen> |
| |
| <!-- How high we lift the divider when touching --> |
| <dimen name="docked_stack_divider_lift_elevation">4dp</dimen> |
| |
| <dimen name="docked_divider_handle_width">16dp</dimen> |
| <dimen name="docked_divider_handle_height">2dp</dimen> |
| |
| <!-- One-Handed Mode --> |
| <!-- Threshold for dragging distance to enable one-handed mode --> |
| <dimen name="gestures_onehanded_drag_threshold">20dp</dimen> |
| |
| <!-- The amount to inset the drop target regions from the edge of the display --> |
| <dimen name="drop_layout_display_margin">16dp</dimen> |
| |
| <!-- How much each bubble is elevated. --> |
| <dimen name="bubble_elevation">1dp</dimen> |
| <!-- How much the bubble flyout text container is elevated. --> |
| <dimen name="bubble_flyout_elevation">4dp</dimen> |
| <!-- How much padding is around the left and right sides of the flyout text. --> |
| <dimen name="bubble_flyout_padding_x">14dp</dimen> |
| <!-- How much padding is around the top and bottom of the flyout text. --> |
| <dimen name="bubble_flyout_padding_y">10dp</dimen> |
| <!-- Size of the triangle that points from the flyout to the bubble stack. --> |
| <dimen name="bubble_flyout_pointer_size">6dp</dimen> |
| <!-- How much space to leave between the flyout (tip of the arrow) and the bubble stack. --> |
| <dimen name="bubble_flyout_space_from_bubble">8dp</dimen> |
| <!-- How much space to leave between the flyout text and the avatar displayed in the flyout. --> |
| <dimen name="bubble_flyout_avatar_message_space">6dp</dimen> |
| <!-- Padding between status bar and bubbles when displayed in expanded state --> |
| <dimen name="bubble_padding_top">16dp</dimen> |
| <!-- Space between bubbles when expanded. --> |
| <dimen name="bubble_spacing">3dp</dimen> |
| <!-- Size of the bubble. --> |
| <dimen name="bubble_size">60dp</dimen> |
| <!-- Size of the badge shown on the bubble. --> |
| <dimen name="bubble_badge_size">24dp</dimen> |
| <!-- Extra padding added to the touchable rect for bubbles so they are easier to grab. --> |
| <dimen name="bubble_touch_padding">12dp</dimen> |
| <!-- Size of the circle around the bubbles when they're in the dismiss target. --> |
| <dimen name="bubble_dismiss_encircle_size">52dp</dimen> |
| <!-- Padding around the view displayed when the bubble is expanded --> |
| <dimen name="bubble_expanded_view_padding">16dp</dimen> |
| <!-- This should be at least the size of bubble_expanded_view_padding; it is used to include |
| a slight touch slop around the expanded view. --> |
| <dimen name="bubble_expanded_view_slop">8dp</dimen> |
| <!-- Default (and minimum) height of the expanded view shown when the bubble is expanded. |
| If this value changes then R.dimen.bubble_expanded_view_min_height in CtsVerifier |
| should also be updated. --> |
| <dimen name="bubble_expanded_default_height">180dp</dimen> |
| <!-- On large screens the width of the expanded view is restricted to this size. --> |
| <dimen name="bubble_expanded_view_tablet_width">412dp</dimen> |
| <!-- Inset to apply to the icon in the overflow button. --> |
| <dimen name="bubble_overflow_icon_inset">30dp</dimen> |
| <!-- Default (and minimum) height of bubble overflow --> |
| <dimen name="bubble_overflow_height">480dp</dimen> |
| <!-- Bubble overflow padding when there are no bubbles --> |
| <dimen name="bubble_overflow_empty_state_padding">16dp</dimen> |
| <!-- Padding of container for overflow bubbles --> |
| <dimen name="bubble_overflow_padding">15dp</dimen> |
| <!-- Padding of label for bubble overflow view --> |
| <dimen name="bubble_overflow_text_padding">7dp</dimen> |
| <!-- Height of bubble overflow empty state illustration --> |
| <dimen name="bubble_empty_overflow_image_height">200dp</dimen> |
| <!-- Padding of bubble overflow empty state subtitle --> |
| <dimen name="bubble_empty_overflow_subtitle_padding">50dp</dimen> |
| <!-- Height of the triangle that points to the expanded bubble. --> |
| <dimen name="bubble_pointer_height">10dp</dimen> |
| <!-- Width of the triangle that points to the expanded bubble. --> |
| <dimen name="bubble_pointer_width">12dp</dimen> |
| <!-- Radius of the pointer --> |
| <dimen name="bubble_pointer_radius">2dp</dimen> |
| <!-- The amount the pointer overlaps with the expanded view to be flush on an edge with |
| a radius. --> |
| <dimen name="bubble_pointer_overlap">1dp</dimen> |
| <!-- Extra padding around the dismiss target for bubbles --> |
| <dimen name="bubble_dismiss_slop">16dp</dimen> |
| <!-- Height of button allowing users to adjust settings for bubbles. --> |
| <dimen name="bubble_manage_button_height">56dp</dimen> |
| <!-- Height of an item in the bubble manage menu. --> |
| <dimen name="bubble_menu_item_height">60dp</dimen> |
| <!-- Max width of the message bubble--> |
| <dimen name="bubble_message_max_width">144dp</dimen> |
| <!-- Min width of the message bubble --> |
| <dimen name="bubble_message_min_width">32dp</dimen> |
| <!-- Interior padding of the message bubble --> |
| <dimen name="bubble_message_padding">4dp</dimen> |
| <!-- Offset between bubbles in their stacked position. --> |
| <dimen name="bubble_stack_offset">12dp</dimen> |
| <!-- Offset between stack y and animation y for bubble swap. --> |
| <dimen name="bubble_swap_animation_offset">15dp</dimen> |
| <!-- How far offscreen the bubble stack rests. There's some padding around the bubble so |
| add 3dp to the desired overhang. --> |
| <dimen name="bubble_stack_offscreen">3dp</dimen> |
| <!-- How far down the screen the stack starts. --> |
| <dimen name="bubble_stack_starting_offset_y">120dp</dimen> |
| <!-- Space between the pointer triangle and the bubble expanded view --> |
| <dimen name="bubble_pointer_margin">5dp</dimen> |
| <!-- Padding applied to the bubble dismiss target. Touches in this padding cause the bubbles to |
| snap to the dismiss target. --> |
| <dimen name="bubble_dismiss_target_padding_x">40dp</dimen> |
| <dimen name="bubble_dismiss_target_padding_y">20dp</dimen> |
| <dimen name="bubble_manage_menu_elevation">4dp</dimen> |
| |
| <!-- Bubbles user education views --> |
| <dimen name="bubbles_manage_education_width">160dp</dimen> |
| <!-- The inset from the top bound of the manage button to place the user education. --> |
| <dimen name="bubbles_manage_education_top_inset">65dp</dimen> |
| <!-- Size of padding for the user education cling, this should at minimum be larger than |
| individual_bubble_size + some padding. --> |
| <dimen name="bubble_stack_user_education_side_inset">72dp</dimen> |
| |
| <!-- The width/height of the size compat restart button. --> |
| <dimen name="size_compat_button_size">48dp</dimen> |
| |
| <!-- The width of the brand image on staring surface. --> |
| <dimen name="starting_surface_brand_image_width">200dp</dimen> |
| |
| <!-- The height of the brand image on staring surface. --> |
| <dimen name="starting_surface_brand_image_height">80dp</dimen> |
| |
| <!-- The length of the shift of main window when exit starting window. --> |
| <dimen name="starting_surface_exit_animation_window_shift_length">20dp</dimen> |
| |
| <!-- The distance of the shift icon when normal exit starting window. --> |
| <dimen name="starting_surface_normal_exit_icon_distance">120dp</dimen> |
| |
| <!-- The distance of the shift icon when early exit starting window. --> |
| <dimen name="starting_surface_early_exit_icon_distance">32dp</dimen> |
| </resources> |
