blob: 39900e65cb8a901ed8cbfca20da67fb512a05be9 [file] [log] [blame]
/*
* Copyright (C) 2018 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Readback.h"
#include <sync/sync.h>
#include <system/window.h>
#include <ui/GraphicBuffer.h>
#include "DeferredLayerUpdater.h"
#include "Properties.h"
#include "hwui/Bitmap.h"
#include "pipeline/skia/LayerDrawable.h"
#include "renderthread/EglManager.h"
#include "renderthread/VulkanManager.h"
#include "utils/Color.h"
#include "utils/MathUtils.h"
#include "utils/TraceUtils.h"
using namespace android::uirenderer::renderthread;
namespace android {
namespace uirenderer {
CopyResult Readback::copySurfaceInto(ANativeWindow* window, const Rect& srcRect, SkBitmap* bitmap) {
ATRACE_CALL();
// Setup the source
AHardwareBuffer* rawSourceBuffer;
int rawSourceFence;
Matrix4 texTransform;
status_t err = ANativeWindow_getLastQueuedBuffer(window, &rawSourceBuffer, &rawSourceFence,
texTransform.data);
base::unique_fd sourceFence(rawSourceFence);
texTransform.invalidateType();
if (err != NO_ERROR) {
ALOGW("Failed to get last queued buffer, error = %d", err);
return CopyResult::UnknownError;
}
if (rawSourceBuffer == nullptr) {
ALOGW("Surface doesn't have any previously queued frames, nothing to readback from");
return CopyResult::SourceEmpty;
}
std::unique_ptr<AHardwareBuffer, decltype(&AHardwareBuffer_release)> sourceBuffer(
rawSourceBuffer, AHardwareBuffer_release);
AHardwareBuffer_Desc description;
AHardwareBuffer_describe(sourceBuffer.get(), &description);
if (description.usage & AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT) {
ALOGW("Surface is protected, unable to copy from it");
return CopyResult::SourceInvalid;
}
if (sourceFence != -1 && sync_wait(sourceFence.get(), 500 /* ms */) != NO_ERROR) {
ALOGE("Timeout (500ms) exceeded waiting for buffer fence, abandoning readback attempt");
return CopyResult::Timeout;
}
sk_sp<SkColorSpace> colorSpace = DataSpaceToColorSpace(
static_cast<android_dataspace>(ANativeWindow_getBuffersDataSpace(window)));
sk_sp<SkImage> image =
SkImage::MakeFromAHardwareBuffer(sourceBuffer.get(), kPremul_SkAlphaType, colorSpace);
return copyImageInto(image, texTransform, srcRect, bitmap);
}
CopyResult Readback::copyHWBitmapInto(Bitmap* hwBitmap, SkBitmap* bitmap) {
LOG_ALWAYS_FATAL_IF(!hwBitmap->isHardware());
Rect srcRect;
Matrix4 transform;
transform.loadScale(1, -1, 1);
transform.translate(0, -1);
return copyImageInto(hwBitmap->makeImage(), transform, srcRect, bitmap);
}
CopyResult Readback::copyLayerInto(DeferredLayerUpdater* deferredLayer, SkBitmap* bitmap) {
ATRACE_CALL();
if (!mRenderThread.getGrContext()) {
return CopyResult::UnknownError;
}
// acquire most recent buffer for drawing
deferredLayer->updateTexImage();
deferredLayer->apply();
const SkRect dstRect = SkRect::MakeIWH(bitmap->width(), bitmap->height());
CopyResult copyResult = CopyResult::UnknownError;
Layer* layer = deferredLayer->backingLayer();
if (layer) {
if (copyLayerInto(layer, nullptr, &dstRect, bitmap)) {
copyResult = CopyResult::Success;
}
}
return copyResult;
}
CopyResult Readback::copyImageInto(const sk_sp<SkImage>& image, Matrix4& texTransform,
const Rect& srcRect, SkBitmap* bitmap) {
ATRACE_CALL();
if (Properties::getRenderPipelineType() == RenderPipelineType::SkiaGL) {
mRenderThread.requireGlContext();
} else {
mRenderThread.requireVkContext();
}
if (!image.get()) {
return CopyResult::UnknownError;
}
int imgWidth = image->width();
int imgHeight = image->height();
sk_sp<GrContext> grContext = sk_ref_sp(mRenderThread.getGrContext());
if (bitmap->colorType() == kRGBA_F16_SkColorType &&
!grContext->colorTypeSupportedAsSurface(bitmap->colorType())) {
ALOGW("Can't copy surface into bitmap, RGBA_F16 config is not supported");
return CopyResult::DestinationInvalid;
}
CopyResult copyResult = CopyResult::UnknownError;
int displayedWidth = imgWidth, displayedHeight = imgHeight;
// If this is a 90 or 270 degree rotation we need to swap width/height to get the device
// size.
if (texTransform[Matrix4::kSkewX] >= 0.5f || texTransform[Matrix4::kSkewX] <= -0.5f) {
std::swap(displayedWidth, displayedHeight);
}
SkRect skiaDestRect = SkRect::MakeWH(bitmap->width(), bitmap->height());
SkRect skiaSrcRect = srcRect.toSkRect();
if (skiaSrcRect.isEmpty()) {
skiaSrcRect = SkRect::MakeIWH(displayedWidth, displayedHeight);
}
bool srcNotEmpty = skiaSrcRect.intersect(SkRect::MakeIWH(displayedWidth, displayedHeight));
if (!srcNotEmpty) {
return copyResult;
}
Layer layer(mRenderThread.renderState(), nullptr, 255, SkBlendMode::kSrc);
layer.setSize(displayedWidth, displayedHeight);
texTransform.copyTo(layer.getTexTransform());
layer.setImage(image);
// Scaling filter is not explicitly set here, because it is done inside copyLayerInfo
// after checking the necessity based on the src/dest rect size and the transformation.
if (copyLayerInto(&layer, &skiaSrcRect, &skiaDestRect, bitmap)) {
copyResult = CopyResult::Success;
}
return copyResult;
}
bool Readback::copyLayerInto(Layer* layer, const SkRect* srcRect, const SkRect* dstRect,
SkBitmap* bitmap) {
/* This intermediate surface is present to work around a bug in SwiftShader that
* prevents us from reading the contents of the layer's texture directly. The
* workaround involves first rendering that texture into an intermediate buffer and
* then reading from the intermediate buffer into the bitmap.
* Another reason to render in an offscreen buffer is to scale and to avoid an issue b/62262733
* with reading incorrect data from EGLImage backed SkImage (likely a driver bug).
*/
sk_sp<SkSurface> tmpSurface = SkSurface::MakeRenderTarget(mRenderThread.getGrContext(),
SkBudgeted::kYes, bitmap->info(), 0,
kTopLeft_GrSurfaceOrigin, nullptr);
// if we can't generate a GPU surface that matches the destination bitmap (e.g. 565) then we
// attempt to do the intermediate rendering step in 8888
if (!tmpSurface.get()) {
SkImageInfo tmpInfo = bitmap->info().makeColorType(SkColorType::kN32_SkColorType);
tmpSurface = SkSurface::MakeRenderTarget(mRenderThread.getGrContext(), SkBudgeted::kYes,
tmpInfo, 0, kTopLeft_GrSurfaceOrigin, nullptr);
if (!tmpSurface.get()) {
ALOGW("Unable to generate GPU buffer in a format compatible with the provided bitmap");
return false;
}
}
if (!skiapipeline::LayerDrawable::DrawLayer(mRenderThread.getGrContext(),
tmpSurface->getCanvas(), layer, srcRect, dstRect,
false)) {
ALOGW("Unable to draw content from GPU into the provided bitmap");
return false;
}
if (!tmpSurface->readPixels(*bitmap, 0, 0)) {
// if we fail to readback from the GPU directly (e.g. 565) then we attempt to read into
// 8888 and then convert that into the destination format before giving up.
SkBitmap tmpBitmap;
SkImageInfo tmpInfo = bitmap->info().makeColorType(SkColorType::kN32_SkColorType);
if (bitmap->info().colorType() == SkColorType::kN32_SkColorType ||
!tmpBitmap.tryAllocPixels(tmpInfo) ||
!tmpSurface->readPixels(tmpBitmap, 0, 0) ||
!tmpBitmap.readPixels(bitmap->info(), bitmap->getPixels(),
bitmap->rowBytes(), 0, 0)) {
ALOGW("Unable to convert content into the provided bitmap");
return false;
}
}
bitmap->notifyPixelsChanged();
return true;
}
} /* namespace uirenderer */
} /* namespace android */