| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "AAudioServiceStreamBase" |
| //#define LOG_NDEBUG 0 |
| #include <utils/Log.h> |
| |
| #include <iomanip> |
| #include <iostream> |
| #include <mutex> |
| |
| #include <media/MediaMetricsItem.h> |
| #include <media/TypeConverter.h> |
| #include <mediautils/SchedulingPolicyService.h> |
| |
| #include "binding/AAudioServiceMessage.h" |
| #include "core/AudioGlobal.h" |
| #include "utility/AudioClock.h" |
| |
| #include "AAudioEndpointManager.h" |
| #include "AAudioService.h" |
| #include "AAudioServiceEndpoint.h" |
| #include "AAudioServiceStreamBase.h" |
| |
| using namespace android; // TODO just import names needed |
| using namespace aaudio; // TODO just import names needed |
| |
| using content::AttributionSourceState; |
| |
| static const int64_t TIMEOUT_NANOS = 3LL * 1000 * 1000 * 1000; |
| // If the stream is idle for more than `IDLE_TIMEOUT_NANOS`, the stream will be put into standby. |
| static const int64_t IDLE_TIMEOUT_NANOS = 3e9; |
| |
| /** |
| * Base class for streams in the service. |
| * @return |
| */ |
| |
| AAudioServiceStreamBase::AAudioServiceStreamBase(AAudioService &audioService) |
| : mCommandThread("AACommand") |
| , mAtomicStreamTimestamp() |
| , mAudioService(audioService) { |
| mMmapClient.attributionSource = AttributionSourceState(); |
| } |
| |
| AAudioServiceStreamBase::~AAudioServiceStreamBase() { |
| ALOGD("%s() called", __func__); |
| |
| // May not be set if open failed. |
| if (mMetricsId.size() > 0) { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_DTOR) |
| .set(AMEDIAMETRICS_PROP_STATE, AudioGlobal_convertStreamStateToText(getState())) |
| .record(); |
| } |
| |
| // If the stream is deleted when OPEN or in use then audio resources will leak. |
| // This would indicate an internal error. So we want to find this ASAP. |
| LOG_ALWAYS_FATAL_IF(!(getState() == AAUDIO_STREAM_STATE_CLOSED |
| || getState() == AAUDIO_STREAM_STATE_UNINITIALIZED), |
| "service stream %p still open, state = %d", |
| this, getState()); |
| |
| // Stop the command thread before destroying. |
| if (mThreadEnabled) { |
| mThreadEnabled = false; |
| mCommandQueue.stopWaiting(); |
| mCommandThread.stop(); |
| } |
| } |
| |
| std::string AAudioServiceStreamBase::dumpHeader() { |
| return {" T Handle UId Port Run State Format Burst Chan Mask Capacity" |
| " HwFormat HwChan HwRate"}; |
| } |
| |
| std::string AAudioServiceStreamBase::dump() const { |
| std::stringstream result; |
| |
| result << " 0x" << std::setfill('0') << std::setw(8) << std::hex << mHandle |
| << std::dec << std::setfill(' ') ; |
| result << std::setw(6) << mMmapClient.attributionSource.uid; |
| result << std::setw(7) << mClientHandle; |
| result << std::setw(4) << (isRunning() ? "yes" : " no"); |
| result << std::setw(6) << getState(); |
| result << std::setw(7) << getFormat(); |
| result << std::setw(6) << mFramesPerBurst; |
| result << std::setw(5) << getSamplesPerFrame(); |
| result << std::setw(8) << std::hex << getChannelMask() << std::dec; |
| result << std::setw(9) << getBufferCapacity(); |
| result << std::setw(9) << getHardwareFormat(); |
| result << std::setw(7) << getHardwareSamplesPerFrame(); |
| result << std::setw(7) << getHardwareSampleRate(); |
| |
| return result.str(); |
| } |
| |
| void AAudioServiceStreamBase::logOpen(aaudio_handle_t streamHandle) { |
| // This is the first log sent from the AAudio Service for a stream. |
| mMetricsId = std::string(AMEDIAMETRICS_KEY_PREFIX_AUDIO_STREAM) |
| + std::to_string(streamHandle); |
| |
| audio_attributes_t attributes = AAudioServiceEndpoint::getAudioAttributesFrom(this); |
| |
| // Once this item is logged by the server, the client with the same PID, UID |
| // can also log properties. |
| mediametrics::LogItem(mMetricsId) |
| .setPid(getOwnerProcessId()) |
| .setUid(getOwnerUserId()) |
| .set(AMEDIAMETRICS_PROP_ALLOWUID, (int32_t)getOwnerUserId()) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_OPEN) |
| // the following are immutable |
| .set(AMEDIAMETRICS_PROP_BUFFERCAPACITYFRAMES, (int32_t)getBufferCapacity()) |
| .set(AMEDIAMETRICS_PROP_BURSTFRAMES, (int32_t)getFramesPerBurst()) |
| .set(AMEDIAMETRICS_PROP_CHANNELCOUNT, (int32_t)getSamplesPerFrame()) |
| .set(AMEDIAMETRICS_PROP_CONTENTTYPE, toString(attributes.content_type).c_str()) |
| .set(AMEDIAMETRICS_PROP_DIRECTION, |
| AudioGlobal_convertDirectionToText(getDirection())) |
| .set(AMEDIAMETRICS_PROP_ENCODING, toString(getFormat()).c_str()) |
| .set(AMEDIAMETRICS_PROP_ROUTEDDEVICEID, (int32_t)getDeviceId()) |
| .set(AMEDIAMETRICS_PROP_SAMPLERATE, (int32_t)getSampleRate()) |
| .set(AMEDIAMETRICS_PROP_SESSIONID, (int32_t)getSessionId()) |
| .set(AMEDIAMETRICS_PROP_SOURCE, toString(attributes.source).c_str()) |
| .set(AMEDIAMETRICS_PROP_USAGE, toString(attributes.usage).c_str()) |
| .record(); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::open(const aaudio::AAudioStreamRequest &request) { |
| AAudioEndpointManager &mEndpointManager = AAudioEndpointManager::getInstance(); |
| aaudio_result_t result = AAUDIO_OK; |
| |
| mMmapClient.attributionSource = request.getAttributionSource(); |
| // TODO b/182392769: use attribution source util |
| mMmapClient.attributionSource.uid = VALUE_OR_FATAL( |
| legacy2aidl_uid_t_int32_t(IPCThreadState::self()->getCallingUid())); |
| mMmapClient.attributionSource.pid = VALUE_OR_FATAL( |
| legacy2aidl_pid_t_int32_t(IPCThreadState::self()->getCallingPid())); |
| |
| // Limit scope of lock to avoid recursive lock in close(). |
| { |
| std::lock_guard<std::mutex> lock(mUpMessageQueueLock); |
| if (mUpMessageQueue != nullptr) { |
| ALOGE("%s() called twice", __func__); |
| return AAUDIO_ERROR_INVALID_STATE; |
| } |
| |
| mUpMessageQueue = std::make_shared<SharedRingBuffer>(); |
| result = mUpMessageQueue->allocate(sizeof(AAudioServiceMessage), |
| QUEUE_UP_CAPACITY_COMMANDS); |
| if (result != AAUDIO_OK) { |
| goto error; |
| } |
| |
| // This is not protected by a lock because the stream cannot be |
| // referenced until the service returns a handle to the client. |
| // So only one thread can open a stream. |
| mServiceEndpoint = mEndpointManager.openEndpoint(mAudioService, |
| request); |
| if (mServiceEndpoint == nullptr) { |
| result = AAUDIO_ERROR_UNAVAILABLE; |
| goto error; |
| } |
| // Save a weak pointer that we will use to access the endpoint. |
| mServiceEndpointWeak = mServiceEndpoint; |
| |
| mFramesPerBurst = mServiceEndpoint->getFramesPerBurst(); |
| copyFrom(*mServiceEndpoint); |
| } |
| |
| // Make sure this object does not get deleted before the run() method |
| // can protect it by making a strong pointer. |
| mCommandQueue.startWaiting(); |
| mThreadEnabled = true; |
| incStrong(nullptr); // See run() method. |
| result = mCommandThread.start(this); |
| if (result != AAUDIO_OK) { |
| decStrong(nullptr); // run() can't do it so we have to do it here. |
| goto error; |
| } |
| return result; |
| |
| error: |
| closeAndClear(); |
| mThreadEnabled = false; |
| mCommandQueue.stopWaiting(); |
| mCommandThread.stop(); |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::close() { |
| aaudio_result_t result = sendCommand(CLOSE, nullptr, true /*waitForReply*/, TIMEOUT_NANOS); |
| |
| // Stop the command thread as the stream is closed. |
| mThreadEnabled = false; |
| mCommandQueue.stopWaiting(); |
| mCommandThread.stop(); |
| |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::close_l() { |
| if (getState() == AAUDIO_STREAM_STATE_CLOSED) { |
| return AAUDIO_OK; |
| } |
| |
| // This will stop the stream, just in case it was not already stopped. |
| stop_l(); |
| |
| return closeAndClear(); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::startDevice() { |
| mClientHandle = AUDIO_PORT_HANDLE_NONE; |
| sp<AAudioServiceEndpoint> endpoint = mServiceEndpointWeak.promote(); |
| if (endpoint == nullptr) { |
| ALOGE("%s() has no endpoint", __func__); |
| return AAUDIO_ERROR_INVALID_STATE; |
| } |
| return endpoint->startStream(this, &mClientHandle); |
| } |
| |
| /** |
| * Start the flow of audio data. |
| * |
| * An AAUDIO_SERVICE_EVENT_STARTED will be sent to the client when complete. |
| */ |
| aaudio_result_t AAudioServiceStreamBase::start() { |
| return sendCommand(START, nullptr, true /*waitForReply*/, TIMEOUT_NANOS); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::start_l() { |
| const int64_t beginNs = AudioClock::getNanoseconds(); |
| aaudio_result_t result = AAUDIO_OK; |
| |
| if (auto state = getState(); |
| state == AAUDIO_STREAM_STATE_CLOSED || isDisconnected_l()) { |
| ALOGW("%s() already CLOSED, returns INVALID_STATE, handle = %d", |
| __func__, getHandle()); |
| return AAUDIO_ERROR_INVALID_STATE; |
| } |
| |
| if (mStandby) { |
| ALOGW("%s() the stream is standby, return ERROR_STANDBY, " |
| "expecting the client call exitStandby before start", __func__); |
| return AAUDIO_ERROR_STANDBY; |
| } |
| |
| mediametrics::Defer defer([&] { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_START) |
| .set(AMEDIAMETRICS_PROP_EXECUTIONTIMENS, (int64_t)(AudioClock::getNanoseconds() - beginNs)) |
| .set(AMEDIAMETRICS_PROP_STATE, AudioGlobal_convertStreamStateToText(getState())) |
| .set(AMEDIAMETRICS_PROP_STATUS, (int32_t)result) |
| .record(); }); |
| |
| if (isRunning()) { |
| return result; |
| } |
| |
| setFlowing(false); |
| setSuspended(false); |
| |
| // Start with fresh presentation timestamps. |
| mAtomicStreamTimestamp.clear(); |
| |
| mClientHandle = AUDIO_PORT_HANDLE_NONE; |
| result = startDevice(); |
| if (result != AAUDIO_OK) goto error; |
| |
| // This should happen at the end of the start. |
| sendServiceEvent(AAUDIO_SERVICE_EVENT_STARTED, static_cast<int64_t>(mClientHandle)); |
| setState(AAUDIO_STREAM_STATE_STARTED); |
| |
| return result; |
| |
| error: |
| disconnect_l(); |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::pause() { |
| return sendCommand(PAUSE, nullptr, true /*waitForReply*/, TIMEOUT_NANOS); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::pause_l() { |
| aaudio_result_t result = AAUDIO_OK; |
| if (!isRunning()) { |
| return result; |
| } |
| const int64_t beginNs = AudioClock::getNanoseconds(); |
| |
| mediametrics::Defer defer([&] { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_PAUSE) |
| .set(AMEDIAMETRICS_PROP_EXECUTIONTIMENS, (int64_t)(AudioClock::getNanoseconds() - beginNs)) |
| .set(AMEDIAMETRICS_PROP_STATE, AudioGlobal_convertStreamStateToText(getState())) |
| .set(AMEDIAMETRICS_PROP_STATUS, (int32_t)result) |
| .record(); }); |
| |
| sp<AAudioServiceEndpoint> endpoint = mServiceEndpointWeak.promote(); |
| if (endpoint == nullptr) { |
| ALOGE("%s() has no endpoint", __func__); |
| result = AAUDIO_ERROR_INVALID_STATE; // for MediaMetric tracking |
| return result; |
| } |
| result = endpoint->stopStream(this, mClientHandle); |
| if (result != AAUDIO_OK) { |
| ALOGE("%s() mServiceEndpoint returned %d, %s", __func__, result, getTypeText()); |
| disconnect_l(); // TODO should we return or pause Base first? |
| } |
| |
| sendServiceEvent(AAUDIO_SERVICE_EVENT_PAUSED); |
| setState(AAUDIO_STREAM_STATE_PAUSED); |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::stop() { |
| return sendCommand(STOP, nullptr, true /*waitForReply*/, TIMEOUT_NANOS); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::stop_l() { |
| aaudio_result_t result = AAUDIO_OK; |
| if (!isRunning()) { |
| return result; |
| } |
| const int64_t beginNs = AudioClock::getNanoseconds(); |
| |
| mediametrics::Defer defer([&] { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_STOP) |
| .set(AMEDIAMETRICS_PROP_EXECUTIONTIMENS, (int64_t)(AudioClock::getNanoseconds() - beginNs)) |
| .set(AMEDIAMETRICS_PROP_STATE, AudioGlobal_convertStreamStateToText(getState())) |
| .set(AMEDIAMETRICS_PROP_STATUS, (int32_t)result) |
| .record(); }); |
| |
| setState(AAUDIO_STREAM_STATE_STOPPING); |
| |
| if (result != AAUDIO_OK) { |
| disconnect_l(); |
| return result; |
| } |
| |
| sp<AAudioServiceEndpoint> endpoint = mServiceEndpointWeak.promote(); |
| if (endpoint == nullptr) { |
| ALOGE("%s() has no endpoint", __func__); |
| result = AAUDIO_ERROR_INVALID_STATE; // for MediaMetric tracking |
| return result; |
| } |
| // TODO wait for data to be played out |
| result = endpoint->stopStream(this, mClientHandle); |
| if (result != AAUDIO_OK) { |
| ALOGE("%s() stopStream returned %d, %s", __func__, result, getTypeText()); |
| disconnect_l(); |
| // TODO what to do with result here? |
| } |
| |
| sendServiceEvent(AAUDIO_SERVICE_EVENT_STOPPED); |
| setState(AAUDIO_STREAM_STATE_STOPPED); |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::flush() { |
| return sendCommand(FLUSH, nullptr, true /*waitForReply*/, TIMEOUT_NANOS); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::flush_l() { |
| aaudio_result_t result = AAudio_isFlushAllowed(getState()); |
| if (result != AAUDIO_OK) { |
| return result; |
| } |
| const int64_t beginNs = AudioClock::getNanoseconds(); |
| |
| mediametrics::Defer defer([&] { |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_FLUSH) |
| .set(AMEDIAMETRICS_PROP_EXECUTIONTIMENS, (int64_t)(AudioClock::getNanoseconds() - beginNs)) |
| .set(AMEDIAMETRICS_PROP_STATE, AudioGlobal_convertStreamStateToText(getState())) |
| .set(AMEDIAMETRICS_PROP_STATUS, (int32_t)result) |
| .record(); }); |
| |
| // Data will get flushed when the client receives the FLUSHED event. |
| sendServiceEvent(AAUDIO_SERVICE_EVENT_FLUSHED); |
| setState(AAUDIO_STREAM_STATE_FLUSHED); |
| return AAUDIO_OK; |
| } |
| |
| // implement Runnable, periodically send timestamps to client and process commands from queue. |
| __attribute__((no_sanitize("integer"))) |
| void AAudioServiceStreamBase::run() { |
| ALOGD("%s() %s entering >>>>>>>>>>>>>> COMMANDS", __func__, getTypeText()); |
| // Hold onto the ref counted stream until the end. |
| android::sp<AAudioServiceStreamBase> holdStream(this); |
| TimestampScheduler timestampScheduler; |
| int64_t nextTimestampReportTime; |
| int64_t nextDataReportTime; |
| int64_t standbyTime = AudioClock::getNanoseconds() + IDLE_TIMEOUT_NANOS; |
| // Balance the incStrong from when the thread was launched. |
| holdStream->decStrong(nullptr); |
| |
| // Taking mLock while starting the thread. All the operation must be able to |
| // run with holding the lock. |
| std::scoped_lock<std::mutex> _l(mLock); |
| |
| int32_t loopCount = 0; |
| while (mThreadEnabled.load()) { |
| loopCount++; |
| int64_t timeoutNanos = -1; |
| if (isDisconnected_l()) { |
| if (!isStandby_l()) { |
| // If the stream is disconnected but not in standby mode, wait until standby time. |
| timeoutNanos = standbyTime - AudioClock::getNanoseconds(); |
| timeoutNanos = std::max<int64_t>(0, timeoutNanos); |
| } // else { |
| // If the stream is disconnected and in standby mode, keep `timeoutNanos` as |
| // -1 to wait forever until next command as the stream can only be closed. |
| // } |
| } else if (isRunning() || (isIdle_l() && !isStandby_l())) { |
| timeoutNanos = (isRunning() ? std::min(nextTimestampReportTime, nextDataReportTime) |
| : standbyTime) - AudioClock::getNanoseconds(); |
| timeoutNanos = std::max<int64_t>(0, timeoutNanos); |
| } |
| |
| auto command = mCommandQueue.waitForCommand(timeoutNanos); |
| if (!mThreadEnabled) { |
| // Break the loop if the thread is disabled. |
| break; |
| } |
| |
| if (isRunning() && !isDisconnected_l()) { |
| auto currentTimestamp = AudioClock::getNanoseconds(); |
| if (currentTimestamp >= nextDataReportTime) { |
| reportData_l(); |
| nextDataReportTime = nextDataReportTime_l(); |
| } |
| if (currentTimestamp >= nextTimestampReportTime) { |
| // It is time to update timestamp. |
| if (sendCurrentTimestamp_l() != AAUDIO_OK) { |
| ALOGE("Failed to send current timestamp, stop updating timestamp"); |
| disconnect_l(); |
| } |
| nextTimestampReportTime = timestampScheduler.nextAbsoluteTime(); |
| } |
| } |
| if ((isIdle_l() || isDisconnected_l()) && AudioClock::getNanoseconds() >= standbyTime) { |
| aaudio_result_t result = standby_l(); |
| if (result != AAUDIO_OK) { |
| // If standby failed because of the function is not implemented, there is no |
| // need to retry. Otherwise, retry standby later. |
| ALOGW("Failed to enter standby, error=%d", result); |
| standbyTime = result == AAUDIO_ERROR_UNIMPLEMENTED |
| ? std::numeric_limits<int64_t>::max() |
| : AudioClock::getNanoseconds() + IDLE_TIMEOUT_NANOS; |
| } |
| } |
| |
| if (command != nullptr) { |
| std::scoped_lock<std::mutex> _commandLock(command->lock); |
| switch (command->operationCode) { |
| case START: |
| command->result = start_l(); |
| timestampScheduler.setBurstPeriod(mFramesPerBurst, getSampleRate()); |
| timestampScheduler.start(AudioClock::getNanoseconds()); |
| nextTimestampReportTime = timestampScheduler.nextAbsoluteTime(); |
| nextDataReportTime = nextDataReportTime_l(); |
| break; |
| case PAUSE: |
| command->result = pause_l(); |
| standbyTime = AudioClock::getNanoseconds() + IDLE_TIMEOUT_NANOS; |
| break; |
| case STOP: |
| command->result = stop_l(); |
| standbyTime = AudioClock::getNanoseconds() + IDLE_TIMEOUT_NANOS; |
| break; |
| case FLUSH: |
| command->result = flush_l(); |
| break; |
| case CLOSE: |
| command->result = close_l(); |
| break; |
| case DISCONNECT: |
| disconnect_l(); |
| break; |
| case REGISTER_AUDIO_THREAD: { |
| auto param = (RegisterAudioThreadParam *) command->parameter.get(); |
| command->result = |
| param == nullptr ? AAUDIO_ERROR_ILLEGAL_ARGUMENT |
| : registerAudioThread_l(param->mOwnerPid, |
| param->mClientThreadId, |
| param->mPriority); |
| } |
| break; |
| case UNREGISTER_AUDIO_THREAD: { |
| auto param = (UnregisterAudioThreadParam *) command->parameter.get(); |
| command->result = |
| param == nullptr ? AAUDIO_ERROR_ILLEGAL_ARGUMENT |
| : unregisterAudioThread_l(param->mClientThreadId); |
| } |
| break; |
| case GET_DESCRIPTION: { |
| auto param = (GetDescriptionParam *) command->parameter.get(); |
| command->result = param == nullptr ? AAUDIO_ERROR_ILLEGAL_ARGUMENT |
| : getDescription_l(param->mParcelable); |
| } |
| break; |
| case EXIT_STANDBY: { |
| auto param = (ExitStandbyParam *) command->parameter.get(); |
| command->result = param == nullptr ? AAUDIO_ERROR_ILLEGAL_ARGUMENT |
| : exitStandby_l(param->mParcelable); |
| standbyTime = AudioClock::getNanoseconds() + IDLE_TIMEOUT_NANOS; |
| } break; |
| default: |
| ALOGE("Invalid command op code: %d", command->operationCode); |
| break; |
| } |
| if (command->isWaitingForReply) { |
| command->isWaitingForReply = false; |
| command->conditionVariable.notify_one(); |
| } |
| } |
| } |
| ALOGD("%s() %s exiting after %d loops <<<<<<<<<<<<<< COMMANDS", |
| __func__, getTypeText(), loopCount); |
| } |
| |
| void AAudioServiceStreamBase::disconnect() { |
| sendCommand(DISCONNECT); |
| } |
| |
| void AAudioServiceStreamBase::disconnect_l() { |
| if (!isDisconnected_l() && getState() != AAUDIO_STREAM_STATE_CLOSED) { |
| |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_DISCONNECT) |
| .set(AMEDIAMETRICS_PROP_STATE, AudioGlobal_convertStreamStateToText(getState())) |
| .record(); |
| |
| sendServiceEvent(AAUDIO_SERVICE_EVENT_DISCONNECTED); |
| setDisconnected_l(true); |
| } |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::registerAudioThread(pid_t clientThreadId, int priority) { |
| const pid_t ownerPid = IPCThreadState::self()->getCallingPid(); // TODO review |
| return sendCommand(REGISTER_AUDIO_THREAD, |
| std::make_shared<RegisterAudioThreadParam>(ownerPid, clientThreadId, priority), |
| true /*waitForReply*/, |
| TIMEOUT_NANOS); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::registerAudioThread_l( |
| pid_t ownerPid, pid_t clientThreadId, int priority) { |
| aaudio_result_t result = AAUDIO_OK; |
| if (getRegisteredThread() != AAudioServiceStreamBase::ILLEGAL_THREAD_ID) { |
| ALOGE("AAudioService::registerAudioThread(), thread already registered"); |
| result = AAUDIO_ERROR_INVALID_STATE; |
| } else { |
| setRegisteredThread(clientThreadId); |
| int err = android::requestPriority(ownerPid, clientThreadId, |
| priority, true /* isForApp */); |
| if (err != 0) { |
| ALOGE("AAudioService::registerAudioThread(%d) failed, errno = %d, priority = %d", |
| clientThreadId, errno, priority); |
| result = AAUDIO_ERROR_INTERNAL; |
| } |
| } |
| return result; |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::unregisterAudioThread(pid_t clientThreadId) { |
| return sendCommand(UNREGISTER_AUDIO_THREAD, |
| std::make_shared<UnregisterAudioThreadParam>(clientThreadId), |
| true /*waitForReply*/, |
| TIMEOUT_NANOS); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::unregisterAudioThread_l(pid_t clientThreadId) { |
| aaudio_result_t result = AAUDIO_OK; |
| if (getRegisteredThread() != clientThreadId) { |
| ALOGE("%s(), wrong thread", __func__); |
| result = AAUDIO_ERROR_ILLEGAL_ARGUMENT; |
| } else { |
| setRegisteredThread(0); |
| } |
| return result; |
| } |
| |
| void AAudioServiceStreamBase::setState(aaudio_stream_state_t state) { |
| // CLOSED is a final state. |
| if (mState != AAUDIO_STREAM_STATE_CLOSED) { |
| mState = state; |
| } else { |
| ALOGW_IF(mState != state, "%s(%d) when already CLOSED", __func__, state); |
| } |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::sendServiceEvent(aaudio_service_event_t event, |
| double dataDouble) { |
| AAudioServiceMessage command; |
| command.what = AAudioServiceMessage::code::EVENT; |
| command.event.event = event; |
| command.event.dataDouble = dataDouble; |
| return writeUpMessageQueue(&command); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::sendServiceEvent(aaudio_service_event_t event, |
| int64_t dataLong) { |
| AAudioServiceMessage command; |
| command.what = AAudioServiceMessage::code::EVENT; |
| command.event.event = event; |
| command.event.dataLong = dataLong; |
| return writeUpMessageQueue(&command); |
| } |
| |
| bool AAudioServiceStreamBase::isUpMessageQueueBusy() { |
| std::lock_guard<std::mutex> lock(mUpMessageQueueLock); |
| if (mUpMessageQueue == nullptr) { |
| ALOGE("%s(): mUpMessageQueue null! - stream not open", __func__); |
| return true; |
| } |
| // Is it half full or more |
| return mUpMessageQueue->getFractionalFullness() >= 0.5; |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::writeUpMessageQueue(AAudioServiceMessage *command) { |
| std::lock_guard<std::mutex> lock(mUpMessageQueueLock); |
| if (mUpMessageQueue == nullptr) { |
| ALOGE("%s(): mUpMessageQueue null! - stream not open", __func__); |
| return AAUDIO_ERROR_NULL; |
| } |
| int32_t count = mUpMessageQueue->getFifoBuffer()->write(command, 1); |
| if (count != 1) { |
| ALOGW("%s(): Queue full. Did client stop? Suspending stream. what = %u, %s", |
| __func__, static_cast<unsigned>(command->what), getTypeText()); |
| setSuspended(true); |
| return AAUDIO_ERROR_WOULD_BLOCK; |
| } else { |
| if (isSuspended()) { |
| ALOGW("%s(): Queue no longer full. Un-suspending the stream.", __func__); |
| setSuspended(false); |
| } |
| return AAUDIO_OK; |
| } |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::sendXRunCount(int32_t xRunCount) { |
| return sendServiceEvent(AAUDIO_SERVICE_EVENT_XRUN, (int64_t) xRunCount); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::sendCurrentTimestamp_l() { |
| AAudioServiceMessage command; |
| // It is not worth filling up the queue with timestamps. |
| // That can cause the stream to get suspended. |
| // So just drop the timestamp if the queue is getting full. |
| if (isUpMessageQueueBusy()) { |
| return AAUDIO_OK; |
| } |
| |
| // Send a timestamp for the clock model. |
| aaudio_result_t result = getFreeRunningPosition_l(&command.timestamp.position, |
| &command.timestamp.timestamp); |
| if (result == AAUDIO_OK) { |
| ALOGV("%s() SERVICE %8lld at %lld", __func__, |
| (long long) command.timestamp.position, |
| (long long) command.timestamp.timestamp); |
| command.what = AAudioServiceMessage::code::TIMESTAMP_SERVICE; |
| result = writeUpMessageQueue(&command); |
| |
| if (result == AAUDIO_OK) { |
| // Send a hardware timestamp for presentation time. |
| result = getHardwareTimestamp_l(&command.timestamp.position, |
| &command.timestamp.timestamp); |
| if (result == AAUDIO_OK) { |
| ALOGV("%s() HARDWARE %8lld at %lld", __func__, |
| (long long) command.timestamp.position, |
| (long long) command.timestamp.timestamp); |
| command.what = AAudioServiceMessage::code::TIMESTAMP_HARDWARE; |
| result = writeUpMessageQueue(&command); |
| } |
| } |
| } |
| |
| if (result == AAUDIO_ERROR_UNAVAILABLE) { // TODO review best error code |
| result = AAUDIO_OK; // just not available yet, try again later |
| } |
| return result; |
| } |
| |
| /** |
| * Get an immutable description of the in-memory queues |
| * used to communicate with the underlying HAL or Service. |
| */ |
| aaudio_result_t AAudioServiceStreamBase::getDescription(AudioEndpointParcelable &parcelable) { |
| return sendCommand( |
| GET_DESCRIPTION, |
| std::make_shared<GetDescriptionParam>(&parcelable), |
| true /*waitForReply*/, |
| TIMEOUT_NANOS); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::getDescription_l(AudioEndpointParcelable* parcelable) { |
| { |
| std::lock_guard<std::mutex> lock(mUpMessageQueueLock); |
| if (mUpMessageQueue == nullptr) { |
| ALOGE("%s(): mUpMessageQueue null! - stream not open", __func__); |
| return AAUDIO_ERROR_NULL; |
| } |
| // Gather information on the message queue. |
| mUpMessageQueue->fillParcelable(parcelable, |
| parcelable->mUpMessageQueueParcelable); |
| } |
| return getAudioDataDescription_l(parcelable); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::exitStandby(AudioEndpointParcelable *parcelable) { |
| auto command = std::make_shared<AAudioCommand>( |
| EXIT_STANDBY, |
| std::make_shared<ExitStandbyParam>(parcelable), |
| true /*waitForReply*/, |
| TIMEOUT_NANOS); |
| return mCommandQueue.sendCommand(command); |
| } |
| |
| void AAudioServiceStreamBase::onVolumeChanged(float volume) { |
| sendServiceEvent(AAUDIO_SERVICE_EVENT_VOLUME, volume); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::sendCommand(aaudio_command_opcode opCode, |
| std::shared_ptr<AAudioCommandParam> param, |
| bool waitForReply, |
| int64_t timeoutNanos) { |
| return mCommandQueue.sendCommand(std::make_shared<AAudioCommand>( |
| opCode, param, waitForReply, timeoutNanos)); |
| } |
| |
| aaudio_result_t AAudioServiceStreamBase::closeAndClear() { |
| aaudio_result_t result = AAUDIO_OK; |
| sp<AAudioServiceEndpoint> endpoint = mServiceEndpointWeak.promote(); |
| if (endpoint == nullptr) { |
| result = AAUDIO_ERROR_INVALID_STATE; |
| } else { |
| endpoint->unregisterStream(this); |
| AAudioEndpointManager &endpointManager = AAudioEndpointManager::getInstance(); |
| endpointManager.closeEndpoint(endpoint); |
| |
| // AAudioService::closeStream() prevents two threads from closing at the same time. |
| mServiceEndpoint.clear(); // endpoint will hold the pointer after this method returns. |
| } |
| |
| setState(AAUDIO_STREAM_STATE_CLOSED); |
| |
| mediametrics::LogItem(mMetricsId) |
| .set(AMEDIAMETRICS_PROP_EVENT, AMEDIAMETRICS_PROP_EVENT_VALUE_CLOSE) |
| .record(); |
| return result; |
| } |
