| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "FastMixerDumpState" |
| //#define LOG_NDEBUG 0 |
| |
| #include "Configuration.h" |
| #ifdef FAST_THREAD_STATISTICS |
| #include <audio_utils/Statistics.h> |
| #ifdef CPU_FREQUENCY_STATISTICS |
| #include <cpustats/ThreadCpuUsage.h> |
| #endif |
| #endif |
| #include <utils/Log.h> |
| #include "FastMixerDumpState.h" |
| |
| namespace android { |
| |
| FastMixerDumpState::FastMixerDumpState() : FastThreadDumpState(), |
| mWriteSequence(0), mFramesWritten(0), |
| mNumTracks(0), mWriteErrors(0), |
| mSampleRate(0), mFrameCount(0), |
| mTrackMask(0) |
| { |
| } |
| |
| FastMixerDumpState::~FastMixerDumpState() |
| { |
| } |
| |
| // helper function called by qsort() |
| static int compare_uint32_t(const void *pa, const void *pb) |
| { |
| uint32_t a = *(const uint32_t *)pa; |
| uint32_t b = *(const uint32_t *)pb; |
| if (a < b) { |
| return -1; |
| } else if (a > b) { |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| void FastMixerDumpState::dump(int fd) const |
| { |
| if (mCommand == FastMixerState::INITIAL) { |
| dprintf(fd, " FastMixer not initialized\n"); |
| return; |
| } |
| double measuredWarmupMs = (mMeasuredWarmupTs.tv_sec * 1000.0) + |
| (mMeasuredWarmupTs.tv_nsec / 1000000.0); |
| double mixPeriodSec = (double) mFrameCount / mSampleRate; |
| dprintf(fd, " FastMixer command=%s writeSequence=%u framesWritten=%u\n" |
| " numTracks=%u writeErrors=%u underruns=%u overruns=%u\n" |
| " sampleRate=%u frameCount=%zu measuredWarmup=%.3g ms, warmupCycles=%u\n" |
| " mixPeriod=%.2f ms latency=%.2f ms\n", |
| FastMixerState::commandToString(mCommand), mWriteSequence, mFramesWritten, |
| mNumTracks, mWriteErrors, mUnderruns, mOverruns, |
| mSampleRate, mFrameCount, measuredWarmupMs, mWarmupCycles, |
| mixPeriodSec * 1e3, mLatencyMs); |
| dprintf(fd, " FastMixer Timestamp stats: %s\n", mTimestampVerifier.toString().c_str()); |
| #ifdef FAST_THREAD_STATISTICS |
| // find the interval of valid samples |
| const uint32_t bounds = mBounds; |
| const uint32_t newestOpen = bounds & 0xFFFF; |
| uint32_t oldestClosed = bounds >> 16; |
| |
| //uint32_t n = (newestOpen - oldestClosed) & 0xFFFF; |
| uint32_t n; |
| __builtin_sub_overflow(newestOpen, oldestClosed, &n); |
| n &= 0xFFFF; |
| |
| if (n > mSamplingN) { |
| ALOGE("too many samples %u", n); |
| n = mSamplingN; |
| } |
| // statistics for monotonic (wall clock) time, thread raw CPU load in time, CPU clock frequency, |
| // and adjusted CPU load in MHz normalized for CPU clock frequency |
| audio_utils::Statistics<double> wall, loadNs; |
| #ifdef CPU_FREQUENCY_STATISTICS |
| audio_utils::Statistics<double> kHz, loadMHz; |
| uint32_t previousCpukHz = 0; |
| #endif |
| // Assuming a normal distribution for cycle times, three standard deviations on either side of |
| // the mean account for 99.73% of the population. So if we take each tail to be 1/1000 of the |
| // sample set, we get 99.8% combined, or close to three standard deviations. |
| static const uint32_t kTailDenominator = 1000; |
| uint32_t *tail = n >= kTailDenominator ? new uint32_t[n] : NULL; |
| // loop over all the samples |
| for (uint32_t j = 0; j < n; ++j) { |
| size_t i = oldestClosed++ & (mSamplingN - 1); |
| uint32_t wallNs = mMonotonicNs[i]; |
| if (tail != NULL) { |
| tail[j] = wallNs; |
| } |
| wall.add(wallNs); |
| uint32_t sampleLoadNs = mLoadNs[i]; |
| loadNs.add(sampleLoadNs); |
| #ifdef CPU_FREQUENCY_STATISTICS |
| uint32_t sampleCpukHz = mCpukHz[i]; |
| // skip bad kHz samples |
| if ((sampleCpukHz & ~0xF) != 0) { |
| kHz.add(sampleCpukHz >> 4); |
| if (sampleCpukHz == previousCpukHz) { |
| double megacycles = (double) sampleLoadNs * (double) (sampleCpukHz >> 4) * 1e-12; |
| double adjMHz = megacycles / mixPeriodSec; // _not_ wallNs * 1e9 |
| loadMHz.add(adjMHz); |
| } |
| } |
| previousCpukHz = sampleCpukHz; |
| #endif |
| } |
| if (n) { |
| dprintf(fd, " Simple moving statistics over last %.1f seconds:\n", |
| wall.getN() * mixPeriodSec); |
| dprintf(fd, " wall clock time in ms per mix cycle:\n" |
| " mean=%.2f min=%.2f max=%.2f stddev=%.2f\n", |
| wall.getMean()*1e-6, wall.getMin()*1e-6, wall.getMax()*1e-6, |
| wall.getStdDev()*1e-6); |
| dprintf(fd, " raw CPU load in us per mix cycle:\n" |
| " mean=%.0f min=%.0f max=%.0f stddev=%.0f\n", |
| loadNs.getMean()*1e-3, loadNs.getMin()*1e-3, loadNs.getMax()*1e-3, |
| loadNs.getStdDev()*1e-3); |
| } else { |
| dprintf(fd, " No FastMixer statistics available currently\n"); |
| } |
| #ifdef CPU_FREQUENCY_STATISTICS |
| dprintf(fd, " CPU clock frequency in MHz:\n" |
| " mean=%.0f min=%.0f max=%.0f stddev=%.0f\n", |
| kHz.getMean()*1e-3, kHz.getMin()*1e-3, kHz.getMax()*1e-3, kHz.getStdDev()*1e-3); |
| dprintf(fd, " adjusted CPU load in MHz (i.e. normalized for CPU clock frequency):\n" |
| " mean=%.1f min=%.1f max=%.1f stddev=%.1f\n", |
| loadMHz.getMean(), loadMHz.getMin(), loadMHz.getMax(), loadMHz.getStdDev()); |
| #endif |
| if (tail != NULL) { |
| qsort(tail, n, sizeof(uint32_t), compare_uint32_t); |
| // assume same number of tail samples on each side, left and right |
| uint32_t count = n / kTailDenominator; |
| audio_utils::Statistics<double> left, right; |
| for (uint32_t i = 0; i < count; ++i) { |
| left.add(tail[i]); |
| right.add(tail[n - (i + 1)]); |
| } |
| dprintf(fd, " Distribution of mix cycle times in ms for the tails " |
| "(> ~3 stddev outliers):\n" |
| " left tail: mean=%.2f min=%.2f max=%.2f stddev=%.2f\n" |
| " right tail: mean=%.2f min=%.2f max=%.2f stddev=%.2f\n", |
| left.getMean()*1e-6, left.getMin()*1e-6, left.getMax()*1e-6, left.getStdDev()*1e-6, |
| right.getMean()*1e-6, right.getMin()*1e-6, right.getMax()*1e-6, |
| right.getStdDev()*1e-6); |
| delete[] tail; |
| } |
| #endif |
| // The active track mask and track states are updated non-atomically. |
| // So if we relied on isActive to decide whether to display, |
| // then we might display an obsolete track or omit an active track. |
| // Instead we always display all tracks, with an indication |
| // of whether we think the track is active. |
| uint32_t trackMask = mTrackMask; |
| dprintf(fd, " Fast tracks: sMaxFastTracks=%u activeMask=%#x\n", |
| FastMixerState::sMaxFastTracks, trackMask); |
| dprintf(fd, " Index Active Full Partial Empty Recent Ready Written\n"); |
| for (uint32_t i = 0; i < FastMixerState::sMaxFastTracks; ++i, trackMask >>= 1) { |
| bool isActive = trackMask & 1; |
| const FastTrackDump *ftDump = &mTracks[i]; |
| const FastTrackUnderruns& underruns = ftDump->mUnderruns; |
| const char *mostRecent; |
| switch (underruns.mBitFields.mMostRecent) { |
| case UNDERRUN_FULL: |
| mostRecent = "full"; |
| break; |
| case UNDERRUN_PARTIAL: |
| mostRecent = "partial"; |
| break; |
| case UNDERRUN_EMPTY: |
| mostRecent = "empty"; |
| break; |
| default: |
| mostRecent = "?"; |
| break; |
| } |
| dprintf(fd, " %5u %6s %4u %7u %5u %7s %5zu %10lld\n", |
| i, isActive ? "yes" : "no", |
| (underruns.mBitFields.mFull) & UNDERRUN_MASK, |
| (underruns.mBitFields.mPartial) & UNDERRUN_MASK, |
| (underruns.mBitFields.mEmpty) & UNDERRUN_MASK, |
| mostRecent, ftDump->mFramesReady, |
| (long long)ftDump->mFramesWritten); |
| } |
| } |
| |
| } // android |
