blob: 8b7e4b42157ddc569688d6314fb8001d52b0c0ed [file] [log] [blame]
/*
* Copyright (C) 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define LOG_TAG "Camera2-ZslProcessor"
#define ATRACE_TAG ATRACE_TAG_CAMERA
//#define LOG_NDEBUG 0
//#define LOG_NNDEBUG 0
#ifdef LOG_NNDEBUG
#define ALOGVV(...) ALOGV(__VA_ARGS__)
#else
#define ALOGVV(...) ((void)0)
#endif
#include <inttypes.h>
#include <utils/Log.h>
#include <utils/Trace.h>
#include <gui/Surface.h>
#include "common/CameraDeviceBase.h"
#include "api1/Camera2Client.h"
#include "api1/client2/CaptureSequencer.h"
#include "api1/client2/ZslProcessor.h"
namespace android {
namespace camera2 {
ZslProcessor::ZslProcessor(
sp<Camera2Client> client,
wp<CaptureSequencer> sequencer):
Thread(false),
mState(RUNNING),
mClient(client),
mDevice(client->getCameraDevice()),
mSequencer(sequencer),
mId(client->getCameraId()),
mDeleted(false),
mZslBufferAvailable(false),
mZslStreamId(NO_STREAM),
mZslReprocessStreamId(NO_STREAM),
mFrameListHead(0),
mZslQueueHead(0),
mZslQueueTail(0) {
mZslQueue.insertAt(0, kZslBufferDepth);
mFrameList.insertAt(0, kFrameListDepth);
sp<CaptureSequencer> captureSequencer = mSequencer.promote();
if (captureSequencer != 0) captureSequencer->setZslProcessor(this);
}
ZslProcessor::~ZslProcessor() {
ALOGV("%s: Exit", __FUNCTION__);
disconnect();
}
void ZslProcessor::onFrameAvailable(const BufferItem& /*item*/) {
Mutex::Autolock l(mInputMutex);
if (!mZslBufferAvailable) {
mZslBufferAvailable = true;
mZslBufferAvailableSignal.signal();
}
}
void ZslProcessor::onResultAvailable(const CaptureResult &result) {
ATRACE_CALL();
ALOGV("%s:", __FUNCTION__);
Mutex::Autolock l(mInputMutex);
camera_metadata_ro_entry_t entry;
entry = result.mMetadata.find(ANDROID_SENSOR_TIMESTAMP);
nsecs_t timestamp = entry.data.i64[0];
(void)timestamp;
ALOGVV("Got preview frame for timestamp %" PRId64, timestamp);
if (mState != RUNNING) return;
mFrameList.editItemAt(mFrameListHead) = result.mMetadata;
mFrameListHead = (mFrameListHead + 1) % kFrameListDepth;
findMatchesLocked();
}
void ZslProcessor::onBufferReleased(buffer_handle_t *handle) {
Mutex::Autolock l(mInputMutex);
// Verify that the buffer is in our queue
size_t i = 0;
for (; i < mZslQueue.size(); i++) {
if (&(mZslQueue[i].buffer.mGraphicBuffer->handle) == handle) break;
}
if (i == mZslQueue.size()) {
ALOGW("%s: Released buffer %p not found in queue",
__FUNCTION__, handle);
}
// Erase entire ZSL queue since we've now completed the capture and preview
// is stopped.
clearZslQueueLocked();
mState = RUNNING;
}
status_t ZslProcessor::updateStream(const Parameters &params) {
ATRACE_CALL();
ALOGV("%s: Configuring ZSL streams", __FUNCTION__);
status_t res;
Mutex::Autolock l(mInputMutex);
sp<Camera2Client> client = mClient.promote();
if (client == 0) {
ALOGE("%s: Camera %d: Client does not exist", __FUNCTION__, mId);
return INVALID_OPERATION;
}
sp<CameraDeviceBase> device = mDevice.promote();
if (device == 0) {
ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
return INVALID_OPERATION;
}
if (mZslConsumer == 0) {
// Create CPU buffer queue endpoint
sp<IGraphicBufferProducer> producer;
sp<IGraphicBufferConsumer> consumer;
BufferQueue::createBufferQueue(&producer, &consumer);
mZslConsumer = new BufferItemConsumer(consumer,
GRALLOC_USAGE_HW_CAMERA_ZSL,
kZslBufferDepth);
mZslConsumer->setFrameAvailableListener(this);
mZslConsumer->setName(String8("Camera2Client::ZslConsumer"));
mZslWindow = new Surface(producer);
}
if (mZslStreamId != NO_STREAM) {
// Check if stream parameters have to change
uint32_t currentWidth, currentHeight;
res = device->getStreamInfo(mZslStreamId,
&currentWidth, &currentHeight, 0);
if (res != OK) {
ALOGE("%s: Camera %d: Error querying capture output stream info: "
"%s (%d)", __FUNCTION__,
mId, strerror(-res), res);
return res;
}
if (currentWidth != (uint32_t)params.fastInfo.arrayWidth ||
currentHeight != (uint32_t)params.fastInfo.arrayHeight) {
res = device->deleteReprocessStream(mZslReprocessStreamId);
if (res != OK) {
ALOGE("%s: Camera %d: Unable to delete old reprocess stream "
"for ZSL: %s (%d)", __FUNCTION__,
mId, strerror(-res), res);
return res;
}
ALOGV("%s: Camera %d: Deleting stream %d since the buffer dimensions changed",
__FUNCTION__, mId, mZslStreamId);
res = device->deleteStream(mZslStreamId);
if (res != OK) {
ALOGE("%s: Camera %d: Unable to delete old output stream "
"for ZSL: %s (%d)", __FUNCTION__,
mId, strerror(-res), res);
return res;
}
mZslStreamId = NO_STREAM;
}
}
mDeleted = false;
if (mZslStreamId == NO_STREAM) {
// Create stream for HAL production
// TODO: Sort out better way to select resolution for ZSL
int streamType = params.quirks.useZslFormat ?
(int)CAMERA2_HAL_PIXEL_FORMAT_ZSL :
(int)HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED;
res = device->createStream(mZslWindow,
params.fastInfo.arrayWidth, params.fastInfo.arrayHeight,
streamType, &mZslStreamId);
if (res != OK) {
ALOGE("%s: Camera %d: Can't create output stream for ZSL: "
"%s (%d)", __FUNCTION__, mId,
strerror(-res), res);
return res;
}
res = device->createReprocessStreamFromStream(mZslStreamId,
&mZslReprocessStreamId);
if (res != OK) {
ALOGE("%s: Camera %d: Can't create reprocess stream for ZSL: "
"%s (%d)", __FUNCTION__, mId,
strerror(-res), res);
return res;
}
}
client->registerFrameListener(Camera2Client::kPreviewRequestIdStart,
Camera2Client::kPreviewRequestIdEnd,
this,
/*sendPartials*/false);
return OK;
}
status_t ZslProcessor::deleteStream() {
ATRACE_CALL();
Mutex::Autolock l(mInputMutex);
// WAR(b/15408128): do not delete stream unless client is being disconnected.
mDeleted = true;
return OK;
}
status_t ZslProcessor::disconnect() {
ATRACE_CALL();
status_t res;
Mutex::Autolock l(mInputMutex);
if (mZslStreamId != NO_STREAM) {
sp<CameraDeviceBase> device = mDevice.promote();
if (device == 0) {
ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
return INVALID_OPERATION;
}
clearZslQueueLocked();
res = device->deleteReprocessStream(mZslReprocessStreamId);
if (res != OK) {
ALOGE("%s: Camera %d: Cannot delete ZSL reprocessing stream %d: "
"%s (%d)", __FUNCTION__, mId,
mZslReprocessStreamId, strerror(-res), res);
return res;
}
mZslReprocessStreamId = NO_STREAM;
res = device->deleteStream(mZslStreamId);
if (res != OK) {
ALOGE("%s: Camera %d: Cannot delete ZSL output stream %d: "
"%s (%d)", __FUNCTION__, mId,
mZslStreamId, strerror(-res), res);
return res;
}
mZslWindow.clear();
mZslConsumer.clear();
mZslStreamId = NO_STREAM;
}
return OK;
}
int ZslProcessor::getStreamId() const {
Mutex::Autolock l(mInputMutex);
return mZslStreamId;
}
status_t ZslProcessor::pushToReprocess(int32_t requestId) {
ALOGV("%s: Send in reprocess request with id %d",
__FUNCTION__, requestId);
Mutex::Autolock l(mInputMutex);
status_t res;
sp<Camera2Client> client = mClient.promote();
if (client == 0) {
ALOGE("%s: Camera %d: Client does not exist", __FUNCTION__, mId);
return INVALID_OPERATION;
}
IF_ALOGV() {
dumpZslQueue(-1);
}
if (mZslQueueTail != mZslQueueHead) {
CameraMetadata request;
size_t index = mZslQueueTail;
while (index != mZslQueueHead) {
if (!mZslQueue[index].frame.isEmpty()) {
request = mZslQueue[index].frame;
break;
}
index = (index + 1) % kZslBufferDepth;
}
if (index == mZslQueueHead) {
ALOGV("%s: ZSL queue has no valid frames to send yet.",
__FUNCTION__);
return NOT_ENOUGH_DATA;
}
// Verify that the frame is reasonable for reprocessing
camera_metadata_entry_t entry;
entry = request.find(ANDROID_CONTROL_AE_STATE);
if (entry.count == 0) {
ALOGE("%s: ZSL queue frame has no AE state field!",
__FUNCTION__);
return BAD_VALUE;
}
if (entry.data.u8[0] != ANDROID_CONTROL_AE_STATE_CONVERGED &&
entry.data.u8[0] != ANDROID_CONTROL_AE_STATE_LOCKED) {
ALOGV("%s: ZSL queue frame AE state is %d, need full capture",
__FUNCTION__, entry.data.u8[0]);
return NOT_ENOUGH_DATA;
}
buffer_handle_t *handle =
&(mZslQueue[index].buffer.mGraphicBuffer->handle);
uint8_t requestType = ANDROID_REQUEST_TYPE_REPROCESS;
res = request.update(ANDROID_REQUEST_TYPE,
&requestType, 1);
int32_t inputStreams[1] =
{ mZslReprocessStreamId };
if (res == OK) request.update(ANDROID_REQUEST_INPUT_STREAMS,
inputStreams, 1);
int32_t outputStreams[1] =
{ client->getCaptureStreamId() };
if (res == OK) request.update(ANDROID_REQUEST_OUTPUT_STREAMS,
outputStreams, 1);
res = request.update(ANDROID_REQUEST_ID,
&requestId, 1);
if (res != OK ) {
ALOGE("%s: Unable to update frame to a reprocess request", __FUNCTION__);
return INVALID_OPERATION;
}
res = client->stopStream();
if (res != OK) {
ALOGE("%s: Camera %d: Unable to stop preview for ZSL capture: "
"%s (%d)",
__FUNCTION__, mId, strerror(-res), res);
return INVALID_OPERATION;
}
// TODO: have push-and-clear be atomic
res = client->getCameraDevice()->pushReprocessBuffer(mZslReprocessStreamId,
handle, this);
if (res != OK) {
ALOGE("%s: Unable to push buffer for reprocessing: %s (%d)",
__FUNCTION__, strerror(-res), res);
return res;
}
// Update JPEG settings
{
SharedParameters::Lock l(client->getParameters());
res = l.mParameters.updateRequestJpeg(&request);
if (res != OK) {
ALOGE("%s: Camera %d: Unable to update JPEG entries of ZSL "
"capture request: %s (%d)", __FUNCTION__,
mId,
strerror(-res), res);
return res;
}
}
mLatestCapturedRequest = request;
res = client->getCameraDevice()->capture(request);
if (res != OK ) {
ALOGE("%s: Unable to send ZSL reprocess request to capture: %s (%d)",
__FUNCTION__, strerror(-res), res);
return res;
}
mState = LOCKED;
} else {
ALOGV("%s: No ZSL buffers yet", __FUNCTION__);
return NOT_ENOUGH_DATA;
}
return OK;
}
status_t ZslProcessor::clearZslQueue() {
Mutex::Autolock l(mInputMutex);
// If in middle of capture, can't clear out queue
if (mState == LOCKED) return OK;
return clearZslQueueLocked();
}
status_t ZslProcessor::clearZslQueueLocked() {
for (size_t i = 0; i < mZslQueue.size(); i++) {
if (mZslQueue[i].buffer.mTimestamp != 0) {
mZslConsumer->releaseBuffer(mZslQueue[i].buffer);
}
mZslQueue.replaceAt(i);
}
mZslQueueHead = 0;
mZslQueueTail = 0;
return OK;
}
void ZslProcessor::dump(int fd, const Vector<String16>& /*args*/) const {
Mutex::Autolock l(mInputMutex);
if (!mLatestCapturedRequest.isEmpty()) {
String8 result(" Latest ZSL capture request:\n");
write(fd, result.string(), result.size());
mLatestCapturedRequest.dump(fd, 2, 6);
} else {
String8 result(" Latest ZSL capture request: none yet\n");
write(fd, result.string(), result.size());
}
dumpZslQueue(fd);
}
bool ZslProcessor::threadLoop() {
status_t res;
{
Mutex::Autolock l(mInputMutex);
while (!mZslBufferAvailable) {
res = mZslBufferAvailableSignal.waitRelative(mInputMutex,
kWaitDuration);
if (res == TIMED_OUT) return true;
}
mZslBufferAvailable = false;
}
do {
res = processNewZslBuffer();
} while (res == OK);
return true;
}
status_t ZslProcessor::processNewZslBuffer() {
ATRACE_CALL();
status_t res;
sp<BufferItemConsumer> zslConsumer;
{
Mutex::Autolock l(mInputMutex);
if (mZslConsumer == 0) return OK;
zslConsumer = mZslConsumer;
}
ALOGVV("Trying to get next buffer");
BufferItemConsumer::BufferItem item;
res = zslConsumer->acquireBuffer(&item, 0);
if (res != OK) {
if (res != BufferItemConsumer::NO_BUFFER_AVAILABLE) {
ALOGE("%s: Camera %d: Error receiving ZSL image buffer: "
"%s (%d)", __FUNCTION__,
mId, strerror(-res), res);
} else {
ALOGVV(" No buffer");
}
return res;
}
Mutex::Autolock l(mInputMutex);
if (mState == LOCKED) {
ALOGVV("In capture, discarding new ZSL buffers");
zslConsumer->releaseBuffer(item);
return OK;
}
ALOGVV("Got ZSL buffer: head: %d, tail: %d", mZslQueueHead, mZslQueueTail);
if ( (mZslQueueHead + 1) % kZslBufferDepth == mZslQueueTail) {
ALOGVV("Releasing oldest buffer");
zslConsumer->releaseBuffer(mZslQueue[mZslQueueTail].buffer);
mZslQueue.replaceAt(mZslQueueTail);
mZslQueueTail = (mZslQueueTail + 1) % kZslBufferDepth;
}
ZslPair &queueHead = mZslQueue.editItemAt(mZslQueueHead);
queueHead.buffer = item;
queueHead.frame.release();
mZslQueueHead = (mZslQueueHead + 1) % kZslBufferDepth;
ALOGVV(" Acquired buffer, timestamp %" PRId64, queueHead.buffer.mTimestamp);
findMatchesLocked();
return OK;
}
void ZslProcessor::findMatchesLocked() {
ALOGVV("Scanning");
for (size_t i = 0; i < mZslQueue.size(); i++) {
ZslPair &queueEntry = mZslQueue.editItemAt(i);
nsecs_t bufferTimestamp = queueEntry.buffer.mTimestamp;
IF_ALOGV() {
camera_metadata_entry_t entry;
nsecs_t frameTimestamp = 0;
if (!queueEntry.frame.isEmpty()) {
entry = queueEntry.frame.find(ANDROID_SENSOR_TIMESTAMP);
frameTimestamp = entry.data.i64[0];
}
ALOGVV(" %d: b: %" PRId64 "\tf: %" PRId64, i,
bufferTimestamp, frameTimestamp );
}
if (queueEntry.frame.isEmpty() && bufferTimestamp != 0) {
// Have buffer, no matching frame. Look for one
for (size_t j = 0; j < mFrameList.size(); j++) {
bool match = false;
CameraMetadata &frame = mFrameList.editItemAt(j);
if (!frame.isEmpty()) {
camera_metadata_entry_t entry;
entry = frame.find(ANDROID_SENSOR_TIMESTAMP);
if (entry.count == 0) {
ALOGE("%s: Can't find timestamp in frame!",
__FUNCTION__);
continue;
}
nsecs_t frameTimestamp = entry.data.i64[0];
if (bufferTimestamp == frameTimestamp) {
ALOGVV("%s: Found match %" PRId64, __FUNCTION__,
frameTimestamp);
match = true;
} else {
int64_t delta = abs(bufferTimestamp - frameTimestamp);
if ( delta < 1000000) {
ALOGVV("%s: Found close match %" PRId64 " (delta %" PRId64 ")",
__FUNCTION__, bufferTimestamp, delta);
match = true;
}
}
}
if (match) {
queueEntry.frame.acquire(frame);
break;
}
}
}
}
}
void ZslProcessor::dumpZslQueue(int fd) const {
String8 header("ZSL queue contents:");
String8 indent(" ");
ALOGV("%s", header.string());
if (fd != -1) {
header = indent + header + "\n";
write(fd, header.string(), header.size());
}
for (size_t i = 0; i < mZslQueue.size(); i++) {
const ZslPair &queueEntry = mZslQueue[i];
nsecs_t bufferTimestamp = queueEntry.buffer.mTimestamp;
camera_metadata_ro_entry_t entry;
nsecs_t frameTimestamp = 0;
int frameAeState = -1;
if (!queueEntry.frame.isEmpty()) {
entry = queueEntry.frame.find(ANDROID_SENSOR_TIMESTAMP);
if (entry.count > 0) frameTimestamp = entry.data.i64[0];
entry = queueEntry.frame.find(ANDROID_CONTROL_AE_STATE);
if (entry.count > 0) frameAeState = entry.data.u8[0];
}
String8 result =
String8::format(" %zu: b: %" PRId64 "\tf: %" PRId64 ", AE state: %d", i,
bufferTimestamp, frameTimestamp, frameAeState);
ALOGV("%s", result.string());
if (fd != -1) {
result = indent + result + "\n";
write(fd, result.string(), result.size());
}
}
}
}; // namespace camera2
}; // namespace android