blob: 8e1fcc06ee7f3003f56fd74e78cbfa891be08c96 [file] [log] [blame]
/*
* Copyright (C) 2013 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.hardware.camera2;
import android.hardware.camera2.CaptureRequest;
import android.hardware.camera2.ICameraDeviceCallbacks;
import android.hardware.camera2.ICameraOfflineSession;
import android.hardware.camera2.impl.CameraMetadataNative;
import android.hardware.camera2.params.OutputConfiguration;
import android.hardware.camera2.params.SessionConfiguration;
import android.hardware.camera2.utils.SubmitInfo;
import android.view.Surface;
/** @hide */
interface ICameraDeviceUser
{
void disconnect();
const int NO_IN_FLIGHT_REPEATING_FRAMES = -1;
SubmitInfo submitRequest(in CaptureRequest request, boolean streaming);
SubmitInfo submitRequestList(in CaptureRequest[] requestList, boolean streaming);
/**
* Cancel the repeating request specified by requestId
* Returns the frame number of the last frame that will be produced from this
* repeating request, or NO_IN_FLIGHT_REPEATING_FRAMES if no frames were produced
* by this repeating request.
*
* Repeating request may be stopped by camera device due to an error. Canceling a stopped
* repeating request will trigger ERROR_ILLEGAL_ARGUMENT.
*/
long cancelRequest(int requestId);
/**
* Begin the device configuration.
*
* <p>
* beginConfigure must be called before any call to deleteStream, createStream,
* or endConfigure. It is not valid to call this when the device is not idle.
* <p>
*/
void beginConfigure();
/**
* The standard operating mode for a camera device; all API guarantees are in force
*/
const int NORMAL_MODE = 0;
/**
* High-speed recording mode; only two outputs targeting preview and video recording may be
* used, and requests must be batched.
*/
const int CONSTRAINED_HIGH_SPEED_MODE = 1;
/**
* Start of custom vendor modes
*/
const int VENDOR_MODE_START = 0x8000;
/**
* End the device configuration.
*
* <p>
* endConfigure must be called after stream configuration is complete (i.e. after
* a call to beginConfigure and subsequent createStream/deleteStream calls). This
* must be called before any requests can be submitted.
* <p>
* @param operatingMode The kind of session to create; either NORMAL_MODE or
* CONSTRAINED_HIGH_SPEED_MODE. Must be a non-negative value.
* @param sessionParams Session wide camera parameters
* @param startTimeMs The timestamp of session creation start, measured by
* SystemClock.uptimeMillis.
* @return a list of stream ids that can be used in offline mode via "switchToOffline"
*/
int[] endConfigure(int operatingMode, in CameraMetadataNative sessionParams, long startTimeMs);
/**
* Check whether a particular session configuration has camera device
* support.
*
* @param sessionConfiguration Specific session configuration to be verified.
* @return true - in case the stream combination is supported.
* false - in case there is no device support.
*/
boolean isSessionConfigurationSupported(in SessionConfiguration sessionConfiguration);
void deleteStream(int streamId);
/**
* Create an output stream
*
* <p>Create an output stream based on the given output configuration</p>
*
* @param outputConfiguration size, format, and other parameters for the stream
* @return new stream ID
*/
int createStream(in OutputConfiguration outputConfiguration);
/**
* Create an input stream
*
* <p>Create an input stream of width, height, and format</p>
*
* @param width Width of the input buffers
* @param height Height of the input buffers
* @param format Format of the input buffers. One of HAL_PIXEL_FORMAT_*.
* @param isMultiResolution Whether the input stream supports variable resolution image.
*
* @return new stream ID
*/
int createInputStream(int width, int height, int format, boolean isMultiResolution);
/**
* Get the surface of the input stream.
*
* <p>It's valid to call this method only after a stream configuration is completed
* successfully and the stream configuration includes a input stream.</p>
*
* @param surface An output argument for the surface of the input stream buffer queue.
*/
Surface getInputSurface();
// Keep in sync with public API in
// frameworks/base/core/java/android/hardware/camera2/CameraDevice.java
const int TEMPLATE_PREVIEW = 1;
const int TEMPLATE_STILL_CAPTURE = 2;
const int TEMPLATE_RECORD = 3;
const int TEMPLATE_VIDEO_SNAPSHOT = 4;
const int TEMPLATE_ZERO_SHUTTER_LAG = 5;
const int TEMPLATE_MANUAL = 6;
CameraMetadataNative createDefaultRequest(int templateId);
CameraMetadataNative getCameraInfo();
void waitUntilIdle();
long flush();
void prepare(int streamId);
void tearDown(int streamId);
void prepare2(int maxCount, int streamId);
void updateOutputConfiguration(int streamId, in OutputConfiguration outputConfiguration);
void finalizeOutputConfigurations(int streamId, in OutputConfiguration outputConfiguration);
// Keep in sync with public API in
// frameworks/base/core/java/android/hardware/camera2/CameraDevice.java
const int AUDIO_RESTRICTION_NONE = 0;
const int AUDIO_RESTRICTION_VIBRATION = 1;
const int AUDIO_RESTRICTION_VIBRATION_SOUND = 3;
/**
* Set audio restriction mode for this camera device.
*
* @param mode the audio restriction mode ID as above
*
*/
void setCameraAudioRestriction(int mode);
/**
* Get global audio restriction mode for all camera clients.
*
* @return the currently applied system-wide audio restriction mode
*/
int getGlobalAudioRestriction();
/**
* Offline processing main entry point
*
* @param callbacks Object that will receive callbacks from offline session
* @param offlineOutputIds The ID of streams that needs to be preserved in offline session
*
* @return Offline session object.
*/
ICameraOfflineSession switchToOffline(in ICameraDeviceCallbacks callbacks,
in int[] offlineOutputIds);
}