blob: e5a011c9348a59768aeb612342fd7c2c421709a5 [file] [log] [blame]
/*
* Copyright (C) 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define LOG_TAG "Camera2-CaptureSequencer"
#define ATRACE_TAG ATRACE_TAG_CAMERA
//#define LOG_NDEBUG 0
#include <utils/Log.h>
#include <utils/Trace.h>
#include <utils/Vector.h>
#include "CaptureSequencer.h"
#include "BurstCapture.h"
#include "../Camera2Device.h"
#include "../Camera2Client.h"
#include "Parameters.h"
#include "ZslProcessorInterface.h"
namespace android {
namespace camera2 {
/** Public members */
CaptureSequencer::CaptureSequencer(wp<Camera2Client> client):
Thread(false),
mStartCapture(false),
mBusy(false),
mNewAEState(false),
mNewFrameReceived(false),
mNewCaptureReceived(false),
mShutterNotified(false),
mClient(client),
mCaptureState(IDLE),
mTriggerId(0),
mTimeoutCount(0),
mCaptureId(Camera2Client::kCaptureRequestIdStart),
mMsgType(0) {
ALOGV("%s", __FUNCTION__);
}
CaptureSequencer::~CaptureSequencer() {
ALOGV("%s: Exit", __FUNCTION__);
}
void CaptureSequencer::setZslProcessor(wp<ZslProcessorInterface> processor) {
Mutex::Autolock l(mInputMutex);
mZslProcessor = processor;
}
status_t CaptureSequencer::startCapture(int msgType) {
ALOGV("%s", __FUNCTION__);
ATRACE_CALL();
Mutex::Autolock l(mInputMutex);
if (mBusy) {
ALOGE("%s: Already busy capturing!", __FUNCTION__);
return INVALID_OPERATION;
}
if (!mStartCapture) {
mMsgType = msgType;
mStartCapture = true;
mStartCaptureSignal.signal();
}
return OK;
}
status_t CaptureSequencer::waitUntilIdle(nsecs_t timeout) {
ATRACE_CALL();
ALOGV("%s: Waiting for idle", __FUNCTION__);
Mutex::Autolock l(mStateMutex);
status_t res = -1;
while (mCaptureState != IDLE) {
nsecs_t startTime = systemTime();
res = mStateChanged.waitRelative(mStateMutex, timeout);
if (res != OK) return res;
timeout -= (systemTime() - startTime);
}
ALOGV("%s: Now idle", __FUNCTION__);
return OK;
}
void CaptureSequencer::notifyAutoExposure(uint8_t newState, int triggerId) {
ATRACE_CALL();
Mutex::Autolock l(mInputMutex);
mAEState = newState;
mAETriggerId = triggerId;
if (!mNewAEState) {
mNewAEState = true;
mNewNotifySignal.signal();
}
}
void CaptureSequencer::onFrameAvailable(int32_t frameId,
const CameraMetadata &frame) {
ALOGV("%s: Listener found new frame", __FUNCTION__);
ATRACE_CALL();
Mutex::Autolock l(mInputMutex);
mNewFrameId = frameId;
mNewFrame = frame;
if (!mNewFrameReceived) {
mNewFrameReceived = true;
mNewFrameSignal.signal();
}
}
void CaptureSequencer::onCaptureAvailable(nsecs_t timestamp,
sp<MemoryBase> captureBuffer) {
ATRACE_CALL();
ALOGV("%s", __FUNCTION__);
Mutex::Autolock l(mInputMutex);
mCaptureTimestamp = timestamp;
mCaptureBuffer = captureBuffer;
if (!mNewCaptureReceived) {
mNewCaptureReceived = true;
mNewCaptureSignal.signal();
}
}
void CaptureSequencer::dump(int fd, const Vector<String16>& /*args*/) {
String8 result;
if (mCaptureRequest.entryCount() != 0) {
result = " Capture request:\n";
write(fd, result.string(), result.size());
mCaptureRequest.dump(fd, 2, 6);
} else {
result = " Capture request: undefined\n";
write(fd, result.string(), result.size());
}
result = String8::format(" Current capture state: %s\n",
kStateNames[mCaptureState]);
result.append(" Latest captured frame:\n");
write(fd, result.string(), result.size());
mNewFrame.dump(fd, 2, 6);
}
/** Private members */
const char* CaptureSequencer::kStateNames[CaptureSequencer::NUM_CAPTURE_STATES+1] =
{
"IDLE",
"START",
"ZSL_START",
"ZSL_WAITING",
"ZSL_REPROCESSING",
"STANDARD_START",
"STANDARD_PRECAPTURE_WAIT",
"STANDARD_CAPTURE",
"STANDARD_CAPTURE_WAIT",
"BURST_CAPTURE_START",
"BURST_CAPTURE_WAIT",
"DONE",
"ERROR",
"UNKNOWN"
};
const CaptureSequencer::StateManager
CaptureSequencer::kStateManagers[CaptureSequencer::NUM_CAPTURE_STATES-1] = {
&CaptureSequencer::manageIdle,
&CaptureSequencer::manageStart,
&CaptureSequencer::manageZslStart,
&CaptureSequencer::manageZslWaiting,
&CaptureSequencer::manageZslReprocessing,
&CaptureSequencer::manageStandardStart,
&CaptureSequencer::manageStandardPrecaptureWait,
&CaptureSequencer::manageStandardCapture,
&CaptureSequencer::manageStandardCaptureWait,
&CaptureSequencer::manageBurstCaptureStart,
&CaptureSequencer::manageBurstCaptureWait,
&CaptureSequencer::manageDone,
};
bool CaptureSequencer::threadLoop() {
sp<Camera2Client> client = mClient.promote();
if (client == 0) return false;
CaptureState currentState;
{
Mutex::Autolock l(mStateMutex);
currentState = mCaptureState;
}
currentState = (this->*kStateManagers[currentState])(client);
Mutex::Autolock l(mStateMutex);
if (currentState != mCaptureState) {
mCaptureState = currentState;
ATRACE_INT("cam2_capt_state", mCaptureState);
ALOGV("Camera %d: New capture state %s",
client->getCameraId(), kStateNames[mCaptureState]);
mStateChanged.signal();
}
if (mCaptureState == ERROR) {
ALOGE("Camera %d: Stopping capture sequencer due to error",
client->getCameraId());
return false;
}
return true;
}
CaptureSequencer::CaptureState CaptureSequencer::manageIdle(
sp<Camera2Client> &/*client*/) {
status_t res;
Mutex::Autolock l(mInputMutex);
while (!mStartCapture) {
res = mStartCaptureSignal.waitRelative(mInputMutex,
kWaitDuration);
if (res == TIMED_OUT) break;
}
if (mStartCapture) {
mStartCapture = false;
mBusy = true;
return START;
}
return IDLE;
}
CaptureSequencer::CaptureState CaptureSequencer::manageDone(sp<Camera2Client> &client) {
status_t res = OK;
ATRACE_CALL();
mCaptureId++;
if (mCaptureId >= Camera2Client::kCaptureRequestIdEnd) {
mCaptureId = Camera2Client::kCaptureRequestIdStart;
}
{
Mutex::Autolock l(mInputMutex);
mBusy = false;
}
{
SharedParameters::Lock l(client->getParameters());
switch (l.mParameters.state) {
case Parameters::DISCONNECTED:
ALOGW("%s: Camera %d: Discarding image data during shutdown ",
__FUNCTION__, client->getCameraId());
res = INVALID_OPERATION;
break;
case Parameters::STILL_CAPTURE:
res = client->getCameraDevice()->waitUntilDrained();
if (res != OK) {
ALOGE("%s: Camera %d: Can't idle after still capture: "
"%s (%d)", __FUNCTION__, client->getCameraId(),
strerror(-res), res);
}
l.mParameters.state = Parameters::STOPPED;
break;
case Parameters::VIDEO_SNAPSHOT:
l.mParameters.state = Parameters::RECORD;
break;
default:
ALOGE("%s: Camera %d: Still image produced unexpectedly "
"in state %s!",
__FUNCTION__, client->getCameraId(),
Parameters::getStateName(l.mParameters.state));
res = INVALID_OPERATION;
}
}
sp<ZslProcessorInterface> processor = mZslProcessor.promote();
if (processor != 0) {
ALOGV("%s: Memory optimization, clearing ZSL queue",
__FUNCTION__);
processor->clearZslQueue();
}
/**
* Fire the jpegCallback in Camera#takePicture(..., jpegCallback)
*/
if (mCaptureBuffer != 0 && res == OK) {
Camera2Client::SharedCameraCallbacks::Lock
l(client->mSharedCameraCallbacks);
ALOGV("%s: Sending still image to client", __FUNCTION__);
if (l.mRemoteCallback != 0) {
l.mRemoteCallback->dataCallback(CAMERA_MSG_COMPRESSED_IMAGE,
mCaptureBuffer, NULL);
} else {
ALOGV("%s: No client!", __FUNCTION__);
}
}
mCaptureBuffer.clear();
return IDLE;
}
CaptureSequencer::CaptureState CaptureSequencer::manageStart(
sp<Camera2Client> &client) {
ALOGV("%s", __FUNCTION__);
status_t res;
ATRACE_CALL();
SharedParameters::Lock l(client->getParameters());
CaptureState nextState = DONE;
res = updateCaptureRequest(l.mParameters, client);
if (res != OK ) {
ALOGE("%s: Camera %d: Can't update still image capture request: %s (%d)",
__FUNCTION__, client->getCameraId(), strerror(-res), res);
return DONE;
}
if(l.mParameters.lightFx != Parameters::LIGHTFX_NONE &&
l.mParameters.state == Parameters::STILL_CAPTURE) {
nextState = BURST_CAPTURE_START;
}
else if (l.mParameters.zslMode &&
l.mParameters.state == Parameters::STILL_CAPTURE &&
l.mParameters.flashMode != Parameters::FLASH_MODE_ON) {
nextState = ZSL_START;
} else {
nextState = STANDARD_START;
}
mShutterNotified = false;
return nextState;
}
CaptureSequencer::CaptureState CaptureSequencer::manageZslStart(
sp<Camera2Client> &client) {
ALOGV("%s", __FUNCTION__);
status_t res;
sp<ZslProcessorInterface> processor = mZslProcessor.promote();
if (processor == 0) {
ALOGE("%s: No ZSL queue to use!", __FUNCTION__);
return DONE;
}
client->registerFrameListener(mCaptureId, mCaptureId + 1,
this);
// TODO: Actually select the right thing here.
res = processor->pushToReprocess(mCaptureId);
if (res != OK) {
if (res == NOT_ENOUGH_DATA) {
ALOGV("%s: Camera %d: ZSL queue doesn't have good frame, "
"falling back to normal capture", __FUNCTION__,
client->getCameraId());
} else {
ALOGE("%s: Camera %d: Error in ZSL queue: %s (%d)",
__FUNCTION__, client->getCameraId(), strerror(-res), res);
}
return STANDARD_START;
}
SharedParameters::Lock l(client->getParameters());
/* warning: this also locks a SharedCameraCallbacks */
shutterNotifyLocked(l.mParameters, client, mMsgType);
mShutterNotified = true;
mTimeoutCount = kMaxTimeoutsForCaptureEnd;
return STANDARD_CAPTURE_WAIT;
}
CaptureSequencer::CaptureState CaptureSequencer::manageZslWaiting(
sp<Camera2Client> &/*client*/) {
ALOGV("%s", __FUNCTION__);
return DONE;
}
CaptureSequencer::CaptureState CaptureSequencer::manageZslReprocessing(
sp<Camera2Client> &/*client*/) {
ALOGV("%s", __FUNCTION__);
return START;
}
CaptureSequencer::CaptureState CaptureSequencer::manageStandardStart(
sp<Camera2Client> &client) {
ATRACE_CALL();
// Get the onFrameAvailable callback when the requestID == mCaptureId
client->registerFrameListener(mCaptureId, mCaptureId + 1,
this);
{
SharedParameters::Lock l(client->getParameters());
mTriggerId = l.mParameters.precaptureTriggerCounter++;
}
client->getCameraDevice()->triggerPrecaptureMetering(mTriggerId);
mAeInPrecapture = false;
mTimeoutCount = kMaxTimeoutsForPrecaptureStart;
return STANDARD_PRECAPTURE_WAIT;
}
CaptureSequencer::CaptureState CaptureSequencer::manageStandardPrecaptureWait(
sp<Camera2Client> &/*client*/) {
status_t res;
ATRACE_CALL();
Mutex::Autolock l(mInputMutex);
while (!mNewAEState) {
res = mNewNotifySignal.waitRelative(mInputMutex, kWaitDuration);
if (res == TIMED_OUT) {
mTimeoutCount--;
break;
}
}
if (mTimeoutCount <= 0) {
ALOGW("Timed out waiting for precapture %s",
mAeInPrecapture ? "end" : "start");
return STANDARD_CAPTURE;
}
if (mNewAEState) {
if (!mAeInPrecapture) {
// Waiting to see PRECAPTURE state
if (mAETriggerId == mTriggerId &&
mAEState == ANDROID_CONTROL_AE_STATE_PRECAPTURE) {
ALOGV("%s: Got precapture start", __FUNCTION__);
mAeInPrecapture = true;
mTimeoutCount = kMaxTimeoutsForPrecaptureEnd;
}
} else {
// Waiting to see PRECAPTURE state end
if (mAETriggerId == mTriggerId &&
mAEState != ANDROID_CONTROL_AE_STATE_PRECAPTURE) {
ALOGV("%s: Got precapture end", __FUNCTION__);
return STANDARD_CAPTURE;
}
}
mNewAEState = false;
}
return STANDARD_PRECAPTURE_WAIT;
}
CaptureSequencer::CaptureState CaptureSequencer::manageStandardCapture(
sp<Camera2Client> &client) {
status_t res;
ATRACE_CALL();
SharedParameters::Lock l(client->getParameters());
Vector<uint8_t> outputStreams;
/**
* Set up output streams in the request
* - preview
* - capture/jpeg
* - callback (if preview callbacks enabled)
* - recording (if recording enabled)
*/
outputStreams.push(client->getPreviewStreamId());
outputStreams.push(client->getCaptureStreamId());
if (l.mParameters.previewCallbackFlags &
CAMERA_FRAME_CALLBACK_FLAG_ENABLE_MASK) {
outputStreams.push(client->getCallbackStreamId());
}
if (l.mParameters.state == Parameters::VIDEO_SNAPSHOT) {
outputStreams.push(client->getRecordingStreamId());
}
res = mCaptureRequest.update(ANDROID_REQUEST_OUTPUT_STREAMS,
outputStreams);
if (res == OK) {
res = mCaptureRequest.update(ANDROID_REQUEST_ID,
&mCaptureId, 1);
}
if (res == OK) {
res = mCaptureRequest.sort();
}
if (res != OK) {
ALOGE("%s: Camera %d: Unable to set up still capture request: %s (%d)",
__FUNCTION__, client->getCameraId(), strerror(-res), res);
return DONE;
}
// Create a capture copy since CameraDeviceBase#capture takes ownership
CameraMetadata captureCopy = mCaptureRequest;
if (captureCopy.entryCount() == 0) {
ALOGE("%s: Camera %d: Unable to copy capture request for HAL device",
__FUNCTION__, client->getCameraId());
return DONE;
}
/**
* Clear the streaming request for still-capture pictures
* (as opposed to i.e. video snapshots)
*/
if (l.mParameters.state == Parameters::STILL_CAPTURE) {
// API definition of takePicture() - stop preview before taking pic
res = client->stopStream();
if (res != OK) {
ALOGE("%s: Camera %d: Unable to stop preview for still capture: "
"%s (%d)",
__FUNCTION__, client->getCameraId(), strerror(-res), res);
return DONE;
}
}
// TODO: Capture should be atomic with setStreamingRequest here
res = client->getCameraDevice()->capture(captureCopy);
if (res != OK) {
ALOGE("%s: Camera %d: Unable to submit still image capture request: "
"%s (%d)",
__FUNCTION__, client->getCameraId(), strerror(-res), res);
return DONE;
}
mTimeoutCount = kMaxTimeoutsForCaptureEnd;
return STANDARD_CAPTURE_WAIT;
}
CaptureSequencer::CaptureState CaptureSequencer::manageStandardCaptureWait(
sp<Camera2Client> &client) {
status_t res;
ATRACE_CALL();
Mutex::Autolock l(mInputMutex);
// Wait for new metadata result (mNewFrame)
while (!mNewFrameReceived) {
res = mNewFrameSignal.waitRelative(mInputMutex, kWaitDuration);
if (res == TIMED_OUT) {
mTimeoutCount--;
break;
}
}
// Approximation of the shutter being closed
// - TODO: use the hal3 exposure callback in Camera3Device instead
if (mNewFrameReceived && !mShutterNotified) {
SharedParameters::Lock l(client->getParameters());
/* warning: this also locks a SharedCameraCallbacks */
shutterNotifyLocked(l.mParameters, client, mMsgType);
mShutterNotified = true;
}
// Wait until jpeg was captured by JpegProcessor
while (mNewFrameReceived && !mNewCaptureReceived) {
res = mNewCaptureSignal.waitRelative(mInputMutex, kWaitDuration);
if (res == TIMED_OUT) {
mTimeoutCount--;
break;
}
}
if (mTimeoutCount <= 0) {
ALOGW("Timed out waiting for capture to complete");
return DONE;
}
if (mNewFrameReceived && mNewCaptureReceived) {
if (mNewFrameId != mCaptureId) {
ALOGW("Mismatched capture frame IDs: Expected %d, got %d",
mCaptureId, mNewFrameId);
}
camera_metadata_entry_t entry;
entry = mNewFrame.find(ANDROID_SENSOR_TIMESTAMP);
if (entry.count == 0) {
ALOGE("No timestamp field in capture frame!");
}
if (entry.data.i64[0] != mCaptureTimestamp) {
ALOGW("Mismatched capture timestamps: Metadata frame %lld,"
" captured buffer %lld",
entry.data.i64[0],
mCaptureTimestamp);
}
client->removeFrameListener(mCaptureId, mCaptureId + 1, this);
mNewFrameReceived = false;
mNewCaptureReceived = false;
return DONE;
}
return STANDARD_CAPTURE_WAIT;
}
CaptureSequencer::CaptureState CaptureSequencer::manageBurstCaptureStart(
sp<Camera2Client> &client) {
ALOGV("%s", __FUNCTION__);
status_t res;
ATRACE_CALL();
// check which burst mode is set, create respective burst object
{
SharedParameters::Lock l(client->getParameters());
res = updateCaptureRequest(l.mParameters, client);
if(res != OK) {
return DONE;
}
//
// check for burst mode type in mParameters here
//
mBurstCapture = new BurstCapture(client, this);
}
res = mCaptureRequest.update(ANDROID_REQUEST_ID, &mCaptureId, 1);
if (res == OK) {
res = mCaptureRequest.sort();
}
if (res != OK) {
ALOGE("%s: Camera %d: Unable to set up still capture request: %s (%d)",
__FUNCTION__, client->getCameraId(), strerror(-res), res);
return DONE;
}
CameraMetadata captureCopy = mCaptureRequest;
if (captureCopy.entryCount() == 0) {
ALOGE("%s: Camera %d: Unable to copy capture request for HAL device",
__FUNCTION__, client->getCameraId());
return DONE;
}
Vector<CameraMetadata> requests;
requests.push(mCaptureRequest);
res = mBurstCapture->start(requests, mCaptureId);
mTimeoutCount = kMaxTimeoutsForCaptureEnd * 10;
return BURST_CAPTURE_WAIT;
}
CaptureSequencer::CaptureState CaptureSequencer::manageBurstCaptureWait(
sp<Camera2Client> &/*client*/) {
status_t res;
ATRACE_CALL();
while (!mNewCaptureReceived) {
res = mNewCaptureSignal.waitRelative(mInputMutex, kWaitDuration);
if (res == TIMED_OUT) {
mTimeoutCount--;
break;
}
}
if (mTimeoutCount <= 0) {
ALOGW("Timed out waiting for burst capture to complete");
return DONE;
}
if (mNewCaptureReceived) {
mNewCaptureReceived = false;
// TODO: update mCaptureId to last burst's capture ID + 1?
return DONE;
}
return BURST_CAPTURE_WAIT;
}
status_t CaptureSequencer::updateCaptureRequest(const Parameters &params,
sp<Camera2Client> &client) {
ATRACE_CALL();
status_t res;
if (mCaptureRequest.entryCount() == 0) {
res = client->getCameraDevice()->createDefaultRequest(
CAMERA2_TEMPLATE_STILL_CAPTURE,
&mCaptureRequest);
if (res != OK) {
ALOGE("%s: Camera %d: Unable to create default still image request:"
" %s (%d)", __FUNCTION__, client->getCameraId(),
strerror(-res), res);
return res;
}
}
res = params.updateRequest(&mCaptureRequest);
if (res != OK) {
ALOGE("%s: Camera %d: Unable to update common entries of capture "
"request: %s (%d)", __FUNCTION__, client->getCameraId(),
strerror(-res), res);
return res;
}
res = params.updateRequestJpeg(&mCaptureRequest);
if (res != OK) {
ALOGE("%s: Camera %d: Unable to update JPEG entries of capture "
"request: %s (%d)", __FUNCTION__, client->getCameraId(),
strerror(-res), res);
return res;
}
return OK;
}
/*static*/ void CaptureSequencer::shutterNotifyLocked(const Parameters &params,
sp<Camera2Client> client, int msgType) {
ATRACE_CALL();
if (params.state == Parameters::STILL_CAPTURE
&& params.playShutterSound
&& (msgType & CAMERA_MSG_SHUTTER)) {
client->getCameraService()->playSound(CameraService::SOUND_SHUTTER);
}
{
Camera2Client::SharedCameraCallbacks::Lock
l(client->mSharedCameraCallbacks);
ALOGV("%s: Notifying of shutter close to client", __FUNCTION__);
if (l.mRemoteCallback != 0) {
// ShutterCallback
l.mRemoteCallback->notifyCallback(CAMERA_MSG_SHUTTER,
/*ext1*/0, /*ext2*/0);
// RawCallback with null buffer
l.mRemoteCallback->notifyCallback(CAMERA_MSG_RAW_IMAGE_NOTIFY,
/*ext1*/0, /*ext2*/0);
} else {
ALOGV("%s: No client!", __FUNCTION__);
}
}
}
}; // namespace camera2
}; // namespace android