blob: 8ec2c85acb8de5aff9790f888620147c845bab0f [file] [log] [blame]
/*
* wpa_supplicant - TWT
* Copyright (c) 2003-2016, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "includes.h"
#include "utils/common.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#ifdef CONFIG_TESTING_OPTIONS
/**
* wpas_twt_send_setup - Send TWT Setup frame (Request) to our AP
* @wpa_s: Pointer to wpa_supplicant
* @dtok: Dialog token
* @exponent: Wake-interval exponent
* @mantissa: Wake-interval mantissa
* @min_twt: Minimum TWT wake duration in units of 256 usec
* @setup_cmd: 0 == request, 1 == suggest, etc. Table 9-297
* Returns: 0 in case of success, negative error code otherwise
*
*/
int wpas_twt_send_setup(struct wpa_supplicant *wpa_s, u8 dtok, int exponent,
int mantissa, u8 min_twt, int setup_cmd, u64 twt,
bool requestor, bool trigger, bool implicit,
bool flow_type, u8 flow_id, bool protection,
u8 twt_channel, u8 control)
{
struct wpabuf *buf;
u16 req_type = 0;
int ret = 0;
if (wpa_s->wpa_state != WPA_COMPLETED || !wpa_s->current_ssid) {
wpa_printf(MSG_DEBUG,
"TWT: No connection - cannot send TWT Setup frame");
return -ENOTCONN;
}
/* 3 = Action category + Action code + Dialog token */
/* 17 = TWT element */
buf = wpabuf_alloc(3 + 17);
if (!buf) {
wpa_printf(MSG_DEBUG,
"TWT: Failed to allocate TWT Setup frame (Request)");
return -ENOMEM;
}
wpa_printf(MSG_DEBUG,
"TWT: Setup request, dtok: %d exponent: %d mantissa: %d min-twt: %d",
dtok, exponent, mantissa, min_twt);
wpabuf_put_u8(buf, WLAN_ACTION_S1G);
wpabuf_put_u8(buf, S1G_ACT_TWT_SETUP);
wpabuf_put_u8(buf, dtok);
wpabuf_put_u8(buf, WLAN_EID_TWT);
wpabuf_put_u8(buf, 15); /* len */
wpabuf_put_u8(buf, control);
if (requestor)
req_type |= BIT(0); /* This STA is a TWT Requesting STA */
/* TWT Setup Command field */
req_type |= (setup_cmd & 0x7) << 1;
if (trigger)
req_type |= BIT(4); /* TWT SP includes trigger frames */
if (implicit)
req_type |= BIT(5); /* Implicit TWT */
if (flow_type)
req_type |= BIT(6); /* Flow Type: Unannounced TWT */
req_type |= (flow_id & 0x7) << 7;
req_type |= (exponent & 0x1f) << 10; /* TWT Wake Interval Exponent */
if (protection)
req_type |= BIT(15);
wpabuf_put_le16(buf, req_type);
wpabuf_put_le64(buf, twt);
wpabuf_put_u8(buf, min_twt); /* Nominal Minimum TWT Wake Duration */
wpabuf_put_le16(buf, mantissa); /* TWT Wake Interval Mantissa */
wpabuf_put_u8(buf, twt_channel); /* TWT Channel */
if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
wpa_s->own_addr, wpa_s->bssid,
wpabuf_head(buf), wpabuf_len(buf), 0) < 0) {
wpa_printf(MSG_DEBUG, "TWT: Failed to send TWT Setup Request");
ret = -ECANCELED;
}
wpabuf_free(buf);
return ret;
}
/**
* wpas_twt_send_teardown - Send TWT teardown request to our AP
* @wpa_s: Pointer to wpa_supplicant
* @flags: The byte that goes inside the TWT Teardown element
* Returns: 0 in case of success, negative error code otherwise
*
*/
int wpas_twt_send_teardown(struct wpa_supplicant *wpa_s, u8 flags)
{
struct wpabuf *buf;
int ret = 0;
if (wpa_s->wpa_state != WPA_COMPLETED || !wpa_s->current_ssid) {
wpa_printf(MSG_DEBUG,
"TWT: No connection - cannot send TWT Teardown frame");
return -ENOTCONN;
}
/* 3 = Action category + Action code + flags */
buf = wpabuf_alloc(3);
if (!buf) {
wpa_printf(MSG_DEBUG,
"TWT: Failed to allocate TWT Teardown frame");
return -ENOMEM;
}
wpa_printf(MSG_DEBUG, "TWT: Teardown request, flags: 0x%x", flags);
wpabuf_put_u8(buf, WLAN_ACTION_S1G);
wpabuf_put_u8(buf, S1G_ACT_TWT_TEARDOWN);
wpabuf_put_u8(buf, flags);
if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
wpa_s->own_addr, wpa_s->bssid,
wpabuf_head(buf), wpabuf_len(buf), 0) < 0) {
wpa_printf(MSG_DEBUG, "TWT: Failed to send TWT Teardown frame");
ret = -ECANCELED;
}
wpabuf_free(buf);
return ret;
}
#endif /* CONFIG_TESTING_OPTIONS */