blob: d078d7cd17832cfab5703d87696762d2885ea058 [file] [log] [blame]
/*
* Copyright 2007 The WebRTC Project Authors. All rights reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include "webrtc/base/socket_unittest.h"
#include "webrtc/base/asyncudpsocket.h"
#include "webrtc/base/gunit.h"
#include "webrtc/base/nethelpers.h"
#include "webrtc/base/socketserver.h"
#include "webrtc/base/testclient.h"
#include "webrtc/base/testutils.h"
#include "webrtc/base/thread.h"
namespace rtc {
#define MAYBE_SKIP_IPV6 \
if (!HasIPv6Enabled()) { \
LOG(LS_INFO) << "No IPv6... skipping"; \
return; \
}
void SocketTest::TestConnectIPv4() {
ConnectInternal(kIPv4Loopback);
}
void SocketTest::TestConnectIPv6() {
MAYBE_SKIP_IPV6;
ConnectInternal(kIPv6Loopback);
}
void SocketTest::TestConnectWithDnsLookupIPv4() {
ConnectWithDnsLookupInternal(kIPv4Loopback, "localhost");
}
void SocketTest::TestConnectWithDnsLookupIPv6() {
// TODO: Enable this when DNS resolution supports IPv6.
LOG(LS_INFO) << "Skipping IPv6 DNS test";
// ConnectWithDnsLookupInternal(kIPv6Loopback, "localhost6");
}
void SocketTest::TestConnectFailIPv4() {
ConnectFailInternal(kIPv4Loopback);
}
void SocketTest::TestConnectFailIPv6() {
MAYBE_SKIP_IPV6;
ConnectFailInternal(kIPv6Loopback);
}
void SocketTest::TestConnectWithDnsLookupFailIPv4() {
ConnectWithDnsLookupFailInternal(kIPv4Loopback);
}
void SocketTest::TestConnectWithDnsLookupFailIPv6() {
MAYBE_SKIP_IPV6;
ConnectWithDnsLookupFailInternal(kIPv6Loopback);
}
void SocketTest::TestConnectWithClosedSocketIPv4() {
ConnectWithClosedSocketInternal(kIPv4Loopback);
}
void SocketTest::TestConnectWithClosedSocketIPv6() {
MAYBE_SKIP_IPV6;
ConnectWithClosedSocketInternal(kIPv6Loopback);
}
void SocketTest::TestConnectWhileNotClosedIPv4() {
ConnectWhileNotClosedInternal(kIPv4Loopback);
}
void SocketTest::TestConnectWhileNotClosedIPv6() {
MAYBE_SKIP_IPV6;
ConnectWhileNotClosedInternal(kIPv6Loopback);
}
void SocketTest::TestServerCloseDuringConnectIPv4() {
ServerCloseDuringConnectInternal(kIPv4Loopback);
}
void SocketTest::TestServerCloseDuringConnectIPv6() {
MAYBE_SKIP_IPV6;
ServerCloseDuringConnectInternal(kIPv6Loopback);
}
void SocketTest::TestClientCloseDuringConnectIPv4() {
ClientCloseDuringConnectInternal(kIPv4Loopback);
}
void SocketTest::TestClientCloseDuringConnectIPv6() {
MAYBE_SKIP_IPV6;
ClientCloseDuringConnectInternal(kIPv6Loopback);
}
void SocketTest::TestServerCloseIPv4() {
ServerCloseInternal(kIPv4Loopback);
}
void SocketTest::TestServerCloseIPv6() {
MAYBE_SKIP_IPV6;
ServerCloseInternal(kIPv6Loopback);
}
void SocketTest::TestCloseInClosedCallbackIPv4() {
CloseInClosedCallbackInternal(kIPv4Loopback);
}
void SocketTest::TestCloseInClosedCallbackIPv6() {
MAYBE_SKIP_IPV6;
CloseInClosedCallbackInternal(kIPv6Loopback);
}
void SocketTest::TestSocketServerWaitIPv4() {
SocketServerWaitInternal(kIPv4Loopback);
}
void SocketTest::TestSocketServerWaitIPv6() {
MAYBE_SKIP_IPV6;
SocketServerWaitInternal(kIPv6Loopback);
}
void SocketTest::TestTcpIPv4() {
TcpInternal(kIPv4Loopback);
}
void SocketTest::TestTcpIPv6() {
MAYBE_SKIP_IPV6;
TcpInternal(kIPv6Loopback);
}
void SocketTest::TestSingleFlowControlCallbackIPv4() {
SingleFlowControlCallbackInternal(kIPv4Loopback);
}
void SocketTest::TestSingleFlowControlCallbackIPv6() {
MAYBE_SKIP_IPV6;
SingleFlowControlCallbackInternal(kIPv6Loopback);
}
void SocketTest::TestUdpIPv4() {
UdpInternal(kIPv4Loopback);
}
void SocketTest::TestUdpIPv6() {
MAYBE_SKIP_IPV6;
UdpInternal(kIPv6Loopback);
}
void SocketTest::TestUdpReadyToSendIPv4() {
#if !defined(WEBRTC_MAC)
// TODO(ronghuawu): Enable this test on mac/ios.
UdpReadyToSend(kIPv4Loopback);
#endif
}
void SocketTest::TestUdpReadyToSendIPv6() {
#if defined(WEBRTC_WIN)
// TODO(ronghuawu): Enable this test (currently flakey) on mac and linux.
MAYBE_SKIP_IPV6;
UdpReadyToSend(kIPv6Loopback);
#endif
}
void SocketTest::TestGetSetOptionsIPv4() {
GetSetOptionsInternal(kIPv4Loopback);
}
void SocketTest::TestGetSetOptionsIPv6() {
MAYBE_SKIP_IPV6;
GetSetOptionsInternal(kIPv6Loopback);
}
// For unbound sockets, GetLocalAddress / GetRemoteAddress return AF_UNSPEC
// values on Windows, but an empty address of the same family on Linux/MacOS X.
bool IsUnspecOrEmptyIP(const IPAddress& address) {
#if !defined(WEBRTC_WIN)
return IPIsAny(address);
#else
return address.family() == AF_UNSPEC;
#endif
}
void SocketTest::ConnectInternal(const IPAddress& loopback) {
testing::StreamSink sink;
SocketAddress accept_addr;
// Create client.
scoped_ptr<AsyncSocket> client(ss_->CreateAsyncSocket(loopback.family(),
SOCK_STREAM));
sink.Monitor(client.get());
EXPECT_EQ(AsyncSocket::CS_CLOSED, client->GetState());
EXPECT_PRED1(IsUnspecOrEmptyIP, client->GetLocalAddress().ipaddr());
// Create server and listen.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
EXPECT_EQ(AsyncSocket::CS_CONNECTING, server->GetState());
// Ensure no pending server connections, since we haven't done anything yet.
EXPECT_FALSE(sink.Check(server.get(), testing::SSE_READ));
EXPECT_TRUE(NULL == server->Accept(&accept_addr));
EXPECT_TRUE(accept_addr.IsNil());
// Attempt connect to listening socket.
EXPECT_EQ(0, client->Connect(server->GetLocalAddress()));
EXPECT_FALSE(client->GetLocalAddress().IsNil());
EXPECT_NE(server->GetLocalAddress(), client->GetLocalAddress());
// Client is connecting, outcome not yet determined.
EXPECT_EQ(AsyncSocket::CS_CONNECTING, client->GetState());
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
// Server has pending connection, accept it.
EXPECT_TRUE_WAIT((sink.Check(server.get(), testing::SSE_READ)), kTimeout);
scoped_ptr<AsyncSocket> accepted(server->Accept(&accept_addr));
ASSERT_TRUE(accepted);
EXPECT_FALSE(accept_addr.IsNil());
EXPECT_EQ(accepted->GetRemoteAddress(), accept_addr);
// Connected from server perspective, check the addresses are correct.
EXPECT_EQ(AsyncSocket::CS_CONNECTED, accepted->GetState());
EXPECT_EQ(server->GetLocalAddress(), accepted->GetLocalAddress());
EXPECT_EQ(client->GetLocalAddress(), accepted->GetRemoteAddress());
// Connected from client perspective, check the addresses are correct.
EXPECT_EQ_WAIT(AsyncSocket::CS_CONNECTED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
EXPECT_EQ(client->GetRemoteAddress(), server->GetLocalAddress());
EXPECT_EQ(client->GetRemoteAddress(), accepted->GetLocalAddress());
}
void SocketTest::ConnectWithDnsLookupInternal(const IPAddress& loopback,
const std::string& host) {
testing::StreamSink sink;
SocketAddress accept_addr;
// Create client.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
// Create server and listen.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
// Attempt connect to listening socket.
SocketAddress dns_addr(server->GetLocalAddress());
dns_addr.SetIP(host);
EXPECT_EQ(0, client->Connect(dns_addr));
// TODO: Bind when doing DNS lookup.
//EXPECT_NE(kEmptyAddr, client->GetLocalAddress()); // Implicit Bind
// Client is connecting, outcome not yet determined.
EXPECT_EQ(AsyncSocket::CS_CONNECTING, client->GetState());
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
// Server has pending connection, accept it.
EXPECT_TRUE_WAIT((sink.Check(server.get(), testing::SSE_READ)), kTimeout);
scoped_ptr<AsyncSocket> accepted(server->Accept(&accept_addr));
ASSERT_TRUE(accepted);
EXPECT_FALSE(accept_addr.IsNil());
EXPECT_EQ(accepted->GetRemoteAddress(), accept_addr);
// Connected from server perspective, check the addresses are correct.
EXPECT_EQ(AsyncSocket::CS_CONNECTED, accepted->GetState());
EXPECT_EQ(server->GetLocalAddress(), accepted->GetLocalAddress());
EXPECT_EQ(client->GetLocalAddress(), accepted->GetRemoteAddress());
// Connected from client perspective, check the addresses are correct.
EXPECT_EQ_WAIT(AsyncSocket::CS_CONNECTED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
EXPECT_EQ(client->GetRemoteAddress(), server->GetLocalAddress());
EXPECT_EQ(client->GetRemoteAddress(), accepted->GetLocalAddress());
}
void SocketTest::ConnectFailInternal(const IPAddress& loopback) {
testing::StreamSink sink;
SocketAddress accept_addr;
// Create client.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
// Create server, but don't listen yet.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
// Attempt connect to a non-existent socket.
// We don't connect to the server socket created above, since on
// MacOS it takes about 75 seconds to get back an error!
SocketAddress bogus_addr(loopback, 65535);
EXPECT_EQ(0, client->Connect(bogus_addr));
// Wait for connection to fail (ECONNREFUSED).
EXPECT_EQ_WAIT(AsyncSocket::CS_CLOSED, client->GetState(), kTimeout);
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_ERROR));
EXPECT_TRUE(client->GetRemoteAddress().IsNil());
// Should be no pending server connections.
EXPECT_FALSE(sink.Check(server.get(), testing::SSE_READ));
EXPECT_TRUE(NULL == server->Accept(&accept_addr));
EXPECT_EQ(IPAddress(), accept_addr.ipaddr());
}
void SocketTest::ConnectWithDnsLookupFailInternal(const IPAddress& loopback) {
testing::StreamSink sink;
SocketAddress accept_addr;
// Create client.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
// Create server, but don't listen yet.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
// Attempt connect to a non-existent host.
// We don't connect to the server socket created above, since on
// MacOS it takes about 75 seconds to get back an error!
SocketAddress bogus_dns_addr("not-a-real-hostname", 65535);
EXPECT_EQ(0, client->Connect(bogus_dns_addr));
// Wait for connection to fail (EHOSTNOTFOUND).
bool dns_lookup_finished = false;
WAIT_(client->GetState() == AsyncSocket::CS_CLOSED, kTimeout,
dns_lookup_finished);
if (!dns_lookup_finished) {
LOG(LS_WARNING) << "Skipping test; DNS resolution took longer than 5 "
<< "seconds.";
return;
}
EXPECT_EQ_WAIT(AsyncSocket::CS_CLOSED, client->GetState(), kTimeout);
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_ERROR));
EXPECT_TRUE(client->GetRemoteAddress().IsNil());
// Should be no pending server connections.
EXPECT_FALSE(sink.Check(server.get(), testing::SSE_READ));
EXPECT_TRUE(NULL == server->Accept(&accept_addr));
EXPECT_TRUE(accept_addr.IsNil());
}
void SocketTest::ConnectWithClosedSocketInternal(const IPAddress& loopback) {
// Create server and listen.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
// Create a client and put in to CS_CLOSED state.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
EXPECT_EQ(0, client->Close());
EXPECT_EQ(AsyncSocket::CS_CLOSED, client->GetState());
// Connect() should reinitialize the socket, and put it in to CS_CONNECTING.
EXPECT_EQ(0, client->Connect(SocketAddress(server->GetLocalAddress())));
EXPECT_EQ(AsyncSocket::CS_CONNECTING, client->GetState());
}
void SocketTest::ConnectWhileNotClosedInternal(const IPAddress& loopback) {
// Create server and listen.
testing::StreamSink sink;
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
// Create client, connect.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
EXPECT_EQ(0, client->Connect(SocketAddress(server->GetLocalAddress())));
EXPECT_EQ(AsyncSocket::CS_CONNECTING, client->GetState());
// Try to connect again. Should fail, but not interfere with original attempt.
EXPECT_EQ(SOCKET_ERROR,
client->Connect(SocketAddress(server->GetLocalAddress())));
// Accept the original connection.
SocketAddress accept_addr;
EXPECT_TRUE_WAIT((sink.Check(server.get(), testing::SSE_READ)), kTimeout);
scoped_ptr<AsyncSocket> accepted(server->Accept(&accept_addr));
ASSERT_TRUE(accepted);
EXPECT_FALSE(accept_addr.IsNil());
// Check the states and addresses.
EXPECT_EQ(AsyncSocket::CS_CONNECTED, accepted->GetState());
EXPECT_EQ(server->GetLocalAddress(), accepted->GetLocalAddress());
EXPECT_EQ(client->GetLocalAddress(), accepted->GetRemoteAddress());
EXPECT_EQ_WAIT(AsyncSocket::CS_CONNECTED, client->GetState(), kTimeout);
EXPECT_EQ(client->GetRemoteAddress(), server->GetLocalAddress());
EXPECT_EQ(client->GetRemoteAddress(), accepted->GetLocalAddress());
// Try to connect again, to an unresolved hostname.
// Shouldn't break anything.
EXPECT_EQ(SOCKET_ERROR,
client->Connect(SocketAddress("localhost",
server->GetLocalAddress().port())));
EXPECT_EQ(AsyncSocket::CS_CONNECTED, accepted->GetState());
EXPECT_EQ(AsyncSocket::CS_CONNECTED, client->GetState());
EXPECT_EQ(client->GetRemoteAddress(), server->GetLocalAddress());
EXPECT_EQ(client->GetRemoteAddress(), accepted->GetLocalAddress());
}
void SocketTest::ServerCloseDuringConnectInternal(const IPAddress& loopback) {
testing::StreamSink sink;
// Create client.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
// Create server and listen.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
// Attempt connect to listening socket.
EXPECT_EQ(0, client->Connect(server->GetLocalAddress()));
// Close down the server while the socket is in the accept queue.
EXPECT_TRUE_WAIT(sink.Check(server.get(), testing::SSE_READ), kTimeout);
server->Close();
// This should fail the connection for the client. Clean up.
EXPECT_EQ_WAIT(AsyncSocket::CS_CLOSED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_ERROR));
client->Close();
}
void SocketTest::ClientCloseDuringConnectInternal(const IPAddress& loopback) {
testing::StreamSink sink;
SocketAddress accept_addr;
// Create client.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
// Create server and listen.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
// Attempt connect to listening socket.
EXPECT_EQ(0, client->Connect(server->GetLocalAddress()));
// Close down the client while the socket is in the accept queue.
EXPECT_TRUE_WAIT(sink.Check(server.get(), testing::SSE_READ), kTimeout);
client->Close();
// The connection should still be able to be accepted.
scoped_ptr<AsyncSocket> accepted(server->Accept(&accept_addr));
ASSERT_TRUE(accepted);
sink.Monitor(accepted.get());
EXPECT_EQ(AsyncSocket::CS_CONNECTED, accepted->GetState());
// The accepted socket should then close (possibly with err, timing-related)
EXPECT_EQ_WAIT(AsyncSocket::CS_CLOSED, accepted->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(accepted.get(), testing::SSE_CLOSE) ||
sink.Check(accepted.get(), testing::SSE_ERROR));
// The client should not get a close event.
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
}
void SocketTest::ServerCloseInternal(const IPAddress& loopback) {
testing::StreamSink sink;
SocketAddress accept_addr;
// Create client.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
// Create server and listen.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
// Attempt connection.
EXPECT_EQ(0, client->Connect(server->GetLocalAddress()));
// Accept connection.
EXPECT_TRUE_WAIT((sink.Check(server.get(), testing::SSE_READ)), kTimeout);
scoped_ptr<AsyncSocket> accepted(server->Accept(&accept_addr));
ASSERT_TRUE(accepted);
sink.Monitor(accepted.get());
// Both sides are now connected.
EXPECT_EQ_WAIT(AsyncSocket::CS_CONNECTED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_EQ(client->GetRemoteAddress(), accepted->GetLocalAddress());
EXPECT_EQ(accepted->GetRemoteAddress(), client->GetLocalAddress());
// Send data to the client, and then close the connection.
EXPECT_EQ(1, accepted->Send("a", 1));
accepted->Close();
EXPECT_EQ(AsyncSocket::CS_CLOSED, accepted->GetState());
// Expect that the client is notified, and has not yet closed.
EXPECT_TRUE_WAIT(sink.Check(client.get(), testing::SSE_READ), kTimeout);
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
EXPECT_EQ(AsyncSocket::CS_CONNECTED, client->GetState());
// Ensure the data can be read.
char buffer[10];
EXPECT_EQ(1, client->Recv(buffer, sizeof(buffer)));
EXPECT_EQ('a', buffer[0]);
// Now we should close, but the remote address will remain.
EXPECT_EQ_WAIT(AsyncSocket::CS_CLOSED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_CLOSE));
EXPECT_FALSE(client->GetRemoteAddress().IsAnyIP());
// The closer should not get a close signal.
EXPECT_FALSE(sink.Check(accepted.get(), testing::SSE_CLOSE));
EXPECT_TRUE(accepted->GetRemoteAddress().IsNil());
// And the closee should only get a single signal.
Thread::Current()->ProcessMessages(0);
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
// Close down the client and ensure all is good.
client->Close();
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
EXPECT_TRUE(client->GetRemoteAddress().IsNil());
}
class SocketCloser : public sigslot::has_slots<> {
public:
void OnClose(AsyncSocket* socket, int error) {
socket->Close(); // Deleting here would blow up the vector of handlers
// for the socket's signal.
}
};
void SocketTest::CloseInClosedCallbackInternal(const IPAddress& loopback) {
testing::StreamSink sink;
SocketCloser closer;
SocketAddress accept_addr;
// Create client.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
client->SignalCloseEvent.connect(&closer, &SocketCloser::OnClose);
// Create server and listen.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
// Attempt connection.
EXPECT_EQ(0, client->Connect(server->GetLocalAddress()));
// Accept connection.
EXPECT_TRUE_WAIT((sink.Check(server.get(), testing::SSE_READ)), kTimeout);
scoped_ptr<AsyncSocket> accepted(server->Accept(&accept_addr));
ASSERT_TRUE(accepted);
sink.Monitor(accepted.get());
// Both sides are now connected.
EXPECT_EQ_WAIT(AsyncSocket::CS_CONNECTED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_EQ(client->GetRemoteAddress(), accepted->GetLocalAddress());
EXPECT_EQ(accepted->GetRemoteAddress(), client->GetLocalAddress());
// Send data to the client, and then close the connection.
accepted->Close();
EXPECT_EQ(AsyncSocket::CS_CLOSED, accepted->GetState());
// Expect that the client is notified, and has not yet closed.
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
EXPECT_EQ(AsyncSocket::CS_CONNECTED, client->GetState());
// Now we should be closed and invalidated
EXPECT_EQ_WAIT(AsyncSocket::CS_CLOSED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_CLOSE));
EXPECT_TRUE(Socket::CS_CLOSED == client->GetState());
}
class Sleeper : public MessageHandler {
public:
Sleeper() {}
void OnMessage(Message* msg) {
Thread::Current()->SleepMs(500);
}
};
void SocketTest::SocketServerWaitInternal(const IPAddress& loopback) {
testing::StreamSink sink;
SocketAddress accept_addr;
// Create & connect server and client sockets.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
EXPECT_EQ(0, client->Connect(server->GetLocalAddress()));
EXPECT_TRUE_WAIT((sink.Check(server.get(), testing::SSE_READ)), kTimeout);
scoped_ptr<AsyncSocket> accepted(server->Accept(&accept_addr));
ASSERT_TRUE(accepted);
sink.Monitor(accepted.get());
EXPECT_EQ(AsyncSocket::CS_CONNECTED, accepted->GetState());
EXPECT_EQ(server->GetLocalAddress(), accepted->GetLocalAddress());
EXPECT_EQ(client->GetLocalAddress(), accepted->GetRemoteAddress());
EXPECT_EQ_WAIT(AsyncSocket::CS_CONNECTED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_FALSE(sink.Check(client.get(), testing::SSE_CLOSE));
EXPECT_EQ(client->GetRemoteAddress(), server->GetLocalAddress());
EXPECT_EQ(client->GetRemoteAddress(), accepted->GetLocalAddress());
// Do an i/o operation, triggering an eventual callback.
EXPECT_FALSE(sink.Check(accepted.get(), testing::SSE_READ));
char buf[1024] = {0};
EXPECT_EQ(1024, client->Send(buf, 1024));
EXPECT_FALSE(sink.Check(accepted.get(), testing::SSE_READ));
// Shouldn't signal when blocked in a thread Send, where process_io is false.
scoped_ptr<Thread> thread(new Thread());
thread->Start();
Sleeper sleeper;
TypedMessageData<AsyncSocket*> data(client.get());
thread->Send(&sleeper, 0, &data);
EXPECT_FALSE(sink.Check(accepted.get(), testing::SSE_READ));
// But should signal when process_io is true.
EXPECT_TRUE_WAIT((sink.Check(accepted.get(), testing::SSE_READ)), kTimeout);
EXPECT_LT(0, accepted->Recv(buf, 1024));
}
void SocketTest::TcpInternal(const IPAddress& loopback) {
testing::StreamSink sink;
SocketAddress accept_addr;
// Create test data.
const size_t kDataSize = 1024 * 1024;
scoped_ptr<char[]> send_buffer(new char[kDataSize]);
scoped_ptr<char[]> recv_buffer(new char[kDataSize]);
size_t send_pos = 0, recv_pos = 0;
for (size_t i = 0; i < kDataSize; ++i) {
send_buffer[i] = static_cast<char>(i % 256);
recv_buffer[i] = 0;
}
// Create client.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
// Create server and listen.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
// Attempt connection.
EXPECT_EQ(0, client->Connect(server->GetLocalAddress()));
// Accept connection.
EXPECT_TRUE_WAIT((sink.Check(server.get(), testing::SSE_READ)), kTimeout);
scoped_ptr<AsyncSocket> accepted(server->Accept(&accept_addr));
ASSERT_TRUE(accepted);
sink.Monitor(accepted.get());
// Both sides are now connected.
EXPECT_EQ_WAIT(AsyncSocket::CS_CONNECTED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_EQ(client->GetRemoteAddress(), accepted->GetLocalAddress());
EXPECT_EQ(accepted->GetRemoteAddress(), client->GetLocalAddress());
// Send and receive a bunch of data.
bool send_waiting_for_writability = false;
bool send_expect_success = true;
bool recv_waiting_for_readability = true;
bool recv_expect_success = false;
int data_in_flight = 0;
while (recv_pos < kDataSize) {
// Send as much as we can if we've been cleared to send.
while (!send_waiting_for_writability && send_pos < kDataSize) {
int tosend = static_cast<int>(kDataSize - send_pos);
int sent = accepted->Send(send_buffer.get() + send_pos, tosend);
if (send_expect_success) {
// The first Send() after connecting or getting writability should
// succeed and send some data.
EXPECT_GT(sent, 0);
send_expect_success = false;
}
if (sent >= 0) {
EXPECT_LE(sent, tosend);
send_pos += sent;
data_in_flight += sent;
} else {
ASSERT_TRUE(accepted->IsBlocking());
send_waiting_for_writability = true;
}
}
// Read all the sent data.
while (data_in_flight > 0) {
if (recv_waiting_for_readability) {
// Wait until data is available.
EXPECT_TRUE_WAIT(sink.Check(client.get(), testing::SSE_READ), kTimeout);
recv_waiting_for_readability = false;
recv_expect_success = true;
}
// Receive as much as we can get in a single recv call.
int rcvd = client->Recv(recv_buffer.get() + recv_pos,
kDataSize - recv_pos);
if (recv_expect_success) {
// The first Recv() after getting readability should succeed and receive
// some data.
// TODO: The following line is disabled due to flakey pulse
// builds. Re-enable if/when possible.
// EXPECT_GT(rcvd, 0);
recv_expect_success = false;
}
if (rcvd >= 0) {
EXPECT_LE(rcvd, data_in_flight);
recv_pos += rcvd;
data_in_flight -= rcvd;
} else {
ASSERT_TRUE(client->IsBlocking());
recv_waiting_for_readability = true;
}
}
// Once all that we've sent has been rcvd, expect to be able to send again.
if (send_waiting_for_writability) {
EXPECT_TRUE_WAIT(sink.Check(accepted.get(), testing::SSE_WRITE),
kTimeout);
send_waiting_for_writability = false;
send_expect_success = true;
}
}
// The received data matches the sent data.
EXPECT_EQ(kDataSize, send_pos);
EXPECT_EQ(kDataSize, recv_pos);
EXPECT_EQ(0, memcmp(recv_buffer.get(), send_buffer.get(), kDataSize));
// Close down.
accepted->Close();
EXPECT_EQ_WAIT(AsyncSocket::CS_CLOSED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_CLOSE));
client->Close();
}
void SocketTest::SingleFlowControlCallbackInternal(const IPAddress& loopback) {
testing::StreamSink sink;
SocketAddress accept_addr;
// Create client.
scoped_ptr<AsyncSocket> client(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(client.get());
// Create server and listen.
scoped_ptr<AsyncSocket> server(
ss_->CreateAsyncSocket(loopback.family(), SOCK_STREAM));
sink.Monitor(server.get());
EXPECT_EQ(0, server->Bind(SocketAddress(loopback, 0)));
EXPECT_EQ(0, server->Listen(5));
// Attempt connection.
EXPECT_EQ(0, client->Connect(server->GetLocalAddress()));
// Accept connection.
EXPECT_TRUE_WAIT((sink.Check(server.get(), testing::SSE_READ)), kTimeout);
scoped_ptr<AsyncSocket> accepted(server->Accept(&accept_addr));
ASSERT_TRUE(accepted);
sink.Monitor(accepted.get());
// Both sides are now connected.
EXPECT_EQ_WAIT(AsyncSocket::CS_CONNECTED, client->GetState(), kTimeout);
EXPECT_TRUE(sink.Check(client.get(), testing::SSE_OPEN));
EXPECT_EQ(client->GetRemoteAddress(), accepted->GetLocalAddress());
EXPECT_EQ(accepted->GetRemoteAddress(), client->GetLocalAddress());
// Expect a writable callback from the connect.
EXPECT_TRUE_WAIT(sink.Check(accepted.get(), testing::SSE_WRITE), kTimeout);
// Fill the socket buffer.
char buf[1024 * 16] = {0};
int sends = 0;
while (++sends && accepted->Send(&buf, ARRAY_SIZE(buf)) != -1) {}
EXPECT_TRUE(accepted->IsBlocking());
// Wait until data is available.
EXPECT_TRUE_WAIT(sink.Check(client.get(), testing::SSE_READ), kTimeout);
// Pull data.
for (int i = 0; i < sends; ++i) {
client->Recv(buf, ARRAY_SIZE(buf));
}
// Expect at least one additional writable callback.
EXPECT_TRUE_WAIT(sink.Check(accepted.get(), testing::SSE_WRITE), kTimeout);
// Adding data in response to the writeable callback shouldn't cause infinite
// callbacks.
int extras = 0;
for (int i = 0; i < 100; ++i) {
accepted->Send(&buf, ARRAY_SIZE(buf));
rtc::Thread::Current()->ProcessMessages(1);
if (sink.Check(accepted.get(), testing::SSE_WRITE)) {
extras++;
}
}
EXPECT_LT(extras, 2);
// Close down.
accepted->Close();
client->Close();
}
void SocketTest::UdpInternal(const IPAddress& loopback) {
SocketAddress empty = EmptySocketAddressWithFamily(loopback.family());
// Test basic bind and connect behavior.
AsyncSocket* socket =
ss_->CreateAsyncSocket(loopback.family(), SOCK_DGRAM);
EXPECT_EQ(AsyncSocket::CS_CLOSED, socket->GetState());
EXPECT_EQ(0, socket->Bind(SocketAddress(loopback, 0)));
SocketAddress addr1 = socket->GetLocalAddress();
EXPECT_EQ(0, socket->Connect(addr1));
EXPECT_EQ(AsyncSocket::CS_CONNECTED, socket->GetState());
socket->Close();
EXPECT_EQ(AsyncSocket::CS_CLOSED, socket->GetState());
delete socket;
// Test send/receive behavior.
scoped_ptr<TestClient> client1(
new TestClient(AsyncUDPSocket::Create(ss_, addr1)));
scoped_ptr<TestClient> client2(
new TestClient(AsyncUDPSocket::Create(ss_, empty)));
SocketAddress addr2;
EXPECT_EQ(3, client2->SendTo("foo", 3, addr1));
EXPECT_TRUE(client1->CheckNextPacket("foo", 3, &addr2));
SocketAddress addr3;
EXPECT_EQ(6, client1->SendTo("bizbaz", 6, addr2));
EXPECT_TRUE(client2->CheckNextPacket("bizbaz", 6, &addr3));
EXPECT_EQ(addr3, addr1);
// TODO: figure out what the intent is here
for (int i = 0; i < 10; ++i) {
client2.reset(new TestClient(AsyncUDPSocket::Create(ss_, empty)));
SocketAddress addr4;
EXPECT_EQ(3, client2->SendTo("foo", 3, addr1));
EXPECT_TRUE(client1->CheckNextPacket("foo", 3, &addr4));
EXPECT_EQ(addr4.ipaddr(), addr2.ipaddr());
SocketAddress addr5;
EXPECT_EQ(6, client1->SendTo("bizbaz", 6, addr4));
EXPECT_TRUE(client2->CheckNextPacket("bizbaz", 6, &addr5));
EXPECT_EQ(addr5, addr1);
addr2 = addr4;
}
}
void SocketTest::UdpReadyToSend(const IPAddress& loopback) {
SocketAddress empty = EmptySocketAddressWithFamily(loopback.family());
// RFC 5737 - The blocks 192.0.2.0/24 (TEST-NET-1) ... are provided for use in
// documentation.
// RFC 3849 - 2001:DB8::/32 as a documentation-only prefix.
std::string dest = (loopback.family() == AF_INET6) ?
"2001:db8::1" : "192.0.2.0";
SocketAddress test_addr(dest, 2345);
// Test send
scoped_ptr<TestClient> client(
new TestClient(AsyncUDPSocket::Create(ss_, empty)));
int test_packet_size = 1200;
rtc::scoped_ptr<char[]> test_packet(new char[test_packet_size]);
// Init the test packet just to avoid memcheck warning.
memset(test_packet.get(), 0, test_packet_size);
// Set the send buffer size to the same size as the test packet to have a
// better chance to get EWOULDBLOCK.
int send_buffer_size = test_packet_size;
#if defined(WEBRTC_LINUX) && !defined(WEBRTC_ANDROID)
send_buffer_size /= 2;
#endif
client->SetOption(rtc::Socket::OPT_SNDBUF, send_buffer_size);
int error = 0;
uint32_t start_ms = Time();
int sent_packet_num = 0;
int expected_error = EWOULDBLOCK;
while (start_ms + kTimeout > Time()) {
int ret = client->SendTo(test_packet.get(), test_packet_size, test_addr);
++sent_packet_num;
if (ret != test_packet_size) {
error = client->GetError();
if (error == expected_error) {
LOG(LS_INFO) << "Got expected error code after sending "
<< sent_packet_num << " packets.";
break;
}
}
}
EXPECT_EQ(expected_error, error);
EXPECT_FALSE(client->ready_to_send());
EXPECT_TRUE_WAIT(client->ready_to_send(), kTimeout);
LOG(LS_INFO) << "Got SignalReadyToSend";
}
void SocketTest::GetSetOptionsInternal(const IPAddress& loopback) {
rtc::scoped_ptr<AsyncSocket> socket(
ss_->CreateAsyncSocket(loopback.family(), SOCK_DGRAM));
socket->Bind(SocketAddress(loopback, 0));
// Check SNDBUF/RCVBUF.
const int desired_size = 12345;
#if defined(WEBRTC_LINUX)
// Yes, really. It's in the kernel source.
const int expected_size = desired_size * 2;
#else // !WEBRTC_LINUX
const int expected_size = desired_size;
#endif // !WEBRTC_LINUX
int recv_size = 0;
int send_size = 0;
// get the initial sizes
ASSERT_NE(-1, socket->GetOption(Socket::OPT_RCVBUF, &recv_size));
ASSERT_NE(-1, socket->GetOption(Socket::OPT_SNDBUF, &send_size));
// set our desired sizes
ASSERT_NE(-1, socket->SetOption(Socket::OPT_RCVBUF, desired_size));
ASSERT_NE(-1, socket->SetOption(Socket::OPT_SNDBUF, desired_size));
// get the sizes again
ASSERT_NE(-1, socket->GetOption(Socket::OPT_RCVBUF, &recv_size));
ASSERT_NE(-1, socket->GetOption(Socket::OPT_SNDBUF, &send_size));
// make sure they are right
ASSERT_EQ(expected_size, recv_size);
ASSERT_EQ(expected_size, send_size);
// Check that we can't set NODELAY on a UDP socket.
int current_nd, desired_nd = 1;
ASSERT_EQ(-1, socket->GetOption(Socket::OPT_NODELAY, &current_nd));
ASSERT_EQ(-1, socket->SetOption(Socket::OPT_NODELAY, desired_nd));
// Skip the esimate MTU test for IPv6 for now.
if (loopback.family() != AF_INET6) {
// Try estimating MTU.
rtc::scoped_ptr<AsyncSocket>
mtu_socket(
ss_->CreateAsyncSocket(loopback.family(), SOCK_DGRAM));
mtu_socket->Bind(SocketAddress(loopback, 0));
uint16_t mtu;
// should fail until we connect
ASSERT_EQ(-1, mtu_socket->EstimateMTU(&mtu));
mtu_socket->Connect(SocketAddress(loopback, 0));
#if defined(WEBRTC_WIN)
// now it should succeed
ASSERT_NE(-1, mtu_socket->EstimateMTU(&mtu));
ASSERT_GE(mtu, 1492); // should be at least the 1492 "plateau" on localhost
#elif defined(WEBRTC_MAC) && !defined(WEBRTC_IOS)
// except on WEBRTC_MAC && !WEBRTC_IOS, where it's not yet implemented
ASSERT_EQ(-1, mtu_socket->EstimateMTU(&mtu));
#else
// and the behavior seems unpredictable on Linux,
// failing on the build machine
// but succeeding on my Ubiquity instance.
#endif
}
}
} // namespace rtc