| // Copyright 2011 Google Inc. |
| // |
| // This code is licensed under the same terms as WebM: |
| // Software License Agreement: http://www.webmproject.org/license/software/ |
| // Additional IP Rights Grant: http://www.webmproject.org/license/additional/ |
| // ----------------------------------------------------------------------------- |
| // |
| // WebP encoder: main interface |
| // |
| // Author: Skal (pascal.massimino@gmail.com) |
| |
| #ifndef WEBP_WEBP_ENCODE_H_ |
| #define WEBP_WEBP_ENCODE_H_ |
| |
| #include <stdlib.h> |
| |
| #include "./types.h" |
| |
| #if defined(__cplusplus) || defined(c_plusplus) |
| extern "C" { |
| #endif |
| |
| #define WEBP_ENCODER_ABI_VERSION 0x0002 |
| |
| // Return the encoder's version number, packed in hexadecimal using 8bits for |
| // each of major/minor/revision. E.g: v2.5.7 is 0x020507. |
| WEBP_EXTERN(int) WebPGetEncoderVersion(void); |
| |
| //----------------------------------------------------------------------------- |
| // One-stop-shop call! No questions asked: |
| |
| // Returns the size of the compressed data (pointed to by *output), or 0 if |
| // an error occurred. The compressed data must be released by the caller |
| // using the call 'free(*output)'. |
| WEBP_EXTERN(size_t) WebPEncodeRGB(const uint8_t* rgb, |
| int width, int height, int stride, |
| float quality_factor, uint8_t** output); |
| WEBP_EXTERN(size_t) WebPEncodeBGR(const uint8_t* bgr, |
| int width, int height, int stride, |
| float quality_factor, uint8_t** output); |
| WEBP_EXTERN(size_t) WebPEncodeRGBA(const uint8_t* rgba, |
| int width, int height, int stride, |
| float quality_factor, uint8_t** output); |
| WEBP_EXTERN(size_t) WebPEncodeBGRA(const uint8_t* bgra, |
| int width, int height, int stride, |
| float quality_factor, uint8_t** output); |
| |
| //----------------------------------------------------------------------------- |
| // Coding parameters |
| |
| typedef struct { |
| float quality; // between 0 (smallest file) and 100 (biggest) |
| int target_size; // if non-zero, set the desired target size in bytes. |
| // Takes precedence over the 'compression' parameter. |
| float target_PSNR; // if non-zero, specifies the minimal distortion to |
| // try to achieve. Takes precedence over target_size. |
| int method; // quality/speed trade-off (0=fast, 6=slower-better) |
| int segments; // maximum number of segments to use, in [1..4] |
| int sns_strength; // Spatial Noise Shaping. 0=off, 100=maximum. |
| int filter_strength; // range: [0 = off .. 100 = strongest] |
| int filter_sharpness; // range: [0 = off .. 7 = least sharp] |
| int filter_type; // filtering type: 0 = simple, 1 = strong |
| // (only used if filter_strength > 0 or autofilter > 0) |
| int autofilter; // Auto adjust filter's strength [0 = off, 1 = on] |
| int pass; // number of entropy-analysis passes (in [1..10]). |
| |
| int show_compressed; // if true, export the compressed picture back. |
| // In-loop filtering is not applied. |
| int preprocessing; // preprocessing filter (0=none, 1=segment-smooth) |
| int partitions; // log2(number of token partitions) in [0..3] |
| // Default is set to 0 for easier progressive decoding. |
| int alpha_compression; // Algorithm for optimizing the alpha plane (0 = none) |
| } WebPConfig; |
| |
| // Enumerate some predefined settings for WebPConfig, depending on the type |
| // of source picture. These presets are used when calling WebPConfigPreset(). |
| typedef enum { |
| WEBP_PRESET_DEFAULT = 0, // default preset. |
| WEBP_PRESET_PICTURE, // digital picture, like portrait, inner shot |
| WEBP_PRESET_PHOTO, // outdoor photograph, with natural lighting |
| WEBP_PRESET_DRAWING, // hand or line drawing, with high-contrast details |
| WEBP_PRESET_ICON, // small-sized colorful images |
| WEBP_PRESET_TEXT // text-like |
| } WebPPreset; |
| |
| // Internal, version-checked, entry point |
| WEBP_EXTERN(int) WebPConfigInitInternal( |
| WebPConfig* const, WebPPreset, float, int); |
| |
| // Should always be called, to initialize a fresh WebPConfig structure before |
| // modification. Returns 0 in case of version mismatch. WebPConfigInit() must |
| // have succeeded before using the 'config' object. |
| static inline int WebPConfigInit(WebPConfig* const config) { |
| return WebPConfigInitInternal(config, WEBP_PRESET_DEFAULT, 75.f, |
| WEBP_ENCODER_ABI_VERSION); |
| } |
| |
| // This function will initialize the configuration according to a predefined |
| // set of parameters (referred to by 'preset') and a given quality factor. |
| // This function can be called as a replacement to WebPConfigInit(). Will |
| // return 0 in case of error. |
| static inline int WebPConfigPreset(WebPConfig* const config, |
| WebPPreset preset, float quality) { |
| return WebPConfigInitInternal(config, preset, quality, |
| WEBP_ENCODER_ABI_VERSION); |
| } |
| |
| // Returns 1 if all parameters are in valid range and the configuration is OK. |
| WEBP_EXTERN(int) WebPValidateConfig(const WebPConfig* const config); |
| |
| //----------------------------------------------------------------------------- |
| // Input / Output |
| |
| typedef struct WebPPicture WebPPicture; // main structure for I/O |
| |
| // non-essential structure for storing auxiliary statistics |
| typedef struct { |
| float PSNR[4]; // peak-signal-to-noise ratio for Y/U/V/All |
| int coded_size; // final size |
| int block_count[3]; // number of intra4/intra16/skipped macroblocks |
| int header_bytes[2]; // approximate number of bytes spent for header |
| // and mode-partition #0 |
| int residual_bytes[3][4]; // approximate number of bytes spent for |
| // DC/AC/uv coefficients for each (0..3) segments. |
| int segment_size[4]; // number of macroblocks in each segments |
| int segment_quant[4]; // quantizer values for each segments |
| int segment_level[4]; // filtering strength for each segments [0..63] |
| |
| int alpha_data_size; // size of the transparency data |
| int layer_data_size; // size of the enhancement layer data |
| } WebPAuxStats; |
| |
| // Signature for output function. Should return 1 if writing was successful. |
| // data/data_size is the segment of data to write, and 'picture' is for |
| // reference (and so one can make use of picture->custom_ptr). |
| typedef int (*WebPWriterFunction)(const uint8_t* data, size_t data_size, |
| const WebPPicture* const picture); |
| |
| typedef enum { |
| // chroma sampling |
| WEBP_YUV420 = 0, // 4:2:0 |
| WEBP_YUV422 = 1, // 4:2:2 |
| WEBP_YUV444 = 2, // 4:4:4 |
| WEBP_YUV400 = 3, // grayscale |
| WEBP_CSP_UV_MASK = 3, // bit-mask to get the UV sampling factors |
| // alpha channel variants |
| WEBP_YUV420A = 4, |
| WEBP_YUV422A = 5, |
| WEBP_YUV444A = 6, |
| WEBP_YUV400A = 7, // grayscale + alpha |
| WEBP_CSP_ALPHA_BIT = 4 // bit that is set if alpha is present |
| } WebPEncCSP; |
| |
| // Encoding error conditions. |
| typedef enum { |
| VP8_ENC_OK = 0, |
| VP8_ENC_ERROR_OUT_OF_MEMORY, // memory error allocating objects |
| VP8_ENC_ERROR_BITSTREAM_OUT_OF_MEMORY, // memory error while flushing bits |
| VP8_ENC_ERROR_NULL_PARAMETER, // a pointer parameter is NULL |
| VP8_ENC_ERROR_INVALID_CONFIGURATION, // configuration is invalid |
| VP8_ENC_ERROR_BAD_DIMENSION, // picture has invalid width/height |
| VP8_ENC_ERROR_PARTITION0_OVERFLOW, // partition is too bigger than 16M |
| VP8_ENC_ERROR_PARTITION_OVERFLOW, // partition is too bigger than 512k |
| VP8_ENC_ERROR_BAD_WRITE, // error while flushing bytes |
| } WebPEncodingError; |
| |
| struct WebPPicture { |
| // input |
| WebPEncCSP colorspace; // colorspace: should be YUV420 for now (=Y'CbCr). |
| int width, height; // dimensions. |
| uint8_t *y, *u, *v; // pointers to luma/chroma planes. |
| int y_stride, uv_stride; // luma/chroma strides. |
| uint8_t *a; // pointer to the alpha plane |
| int a_stride; // stride of the alpha plane |
| |
| // output |
| WebPWriterFunction writer; // can be NULL |
| void* custom_ptr; // can be used by the writer. |
| |
| // map for extra information |
| int extra_info_type; // 1: intra type, 2: segment, 3: quant |
| // 4: intra-16 prediction mode, |
| // 5: chroma prediction mode, |
| // 6: bit cost, 7: distortion |
| uint8_t* extra_info; // if not NULL, points to an array of size |
| // ((width + 15) / 16) * ((height + 15) / 16) that |
| // will be filled with a macroblock map, depending |
| // on extra_info_type. |
| |
| // where to store statistics, if not NULL: |
| WebPAuxStats* stats; |
| |
| // original samples (for non-YUV420 modes) |
| uint8_t *u0, *v0; |
| int uv0_stride; |
| |
| WebPEncodingError error_code; // error code in case of problem. |
| }; |
| |
| // Internal, version-checked, entry point |
| WEBP_EXTERN(int) WebPPictureInitInternal(WebPPicture* const, int); |
| |
| // Should always be called, to initialize the structure. Returns 0 in case of |
| // version mismatch. WebPPictureInit() must have succeeded before using the |
| // 'picture' object. |
| static inline int WebPPictureInit(WebPPicture* const picture) { |
| return WebPPictureInitInternal(picture, WEBP_ENCODER_ABI_VERSION); |
| } |
| |
| //----------------------------------------------------------------------------- |
| // WebPPicture utils |
| |
| // Convenience allocation / deallocation based on picture->width/height: |
| // Allocate y/u/v buffers as per colorspace/width/height specification. |
| // Note! This function will free the previous buffer if needed. |
| // Returns 0 in case of memory error. |
| WEBP_EXTERN(int) WebPPictureAlloc(WebPPicture* const picture); |
| |
| // Release memory allocated by WebPPictureAlloc() or WebPPictureImport*() |
| // Note that this function does _not_ free the memory pointed to by 'picture'. |
| WEBP_EXTERN(void) WebPPictureFree(WebPPicture* const picture); |
| |
| // Copy the pixels of *src into *dst, using WebPPictureAlloc. |
| // Returns 0 in case of memory allocation error. |
| WEBP_EXTERN(int) WebPPictureCopy(const WebPPicture* const src, |
| WebPPicture* const dst); |
| |
| // self-crops a picture to the rectangle defined by top/left/width/height. |
| // Returns 0 in case of memory allocation error, or if the rectangle is |
| // outside of the source picture. |
| WEBP_EXTERN(int) WebPPictureCrop(WebPPicture* const picture, |
| int left, int top, int width, int height); |
| |
| // Rescale a picture to new dimension width x height. |
| // Now gamma correction is applied. |
| // Returns false in case of error (invalid parameter or insufficient memory). |
| WEBP_EXTERN(int) WebPPictureRescale(WebPPicture* const pic, |
| int width, int height); |
| |
| // Colorspace conversion function to import RGB samples. |
| // Previous buffer will be free'd, if any. |
| // *rgb buffer should have a size of at least height * rgb_stride. |
| // Returns 0 in case of memory error. |
| WEBP_EXTERN(int) WebPPictureImportRGB( |
| WebPPicture* const picture, const uint8_t* const rgb, int rgb_stride); |
| // Same, but for RGBA buffer |
| WEBP_EXTERN(int) WebPPictureImportRGBA( |
| WebPPicture* const picture, const uint8_t* const rgba, int rgba_stride); |
| |
| // Variant of the above, but taking BGR(A) input: |
| WEBP_EXTERN(int) WebPPictureImportBGR( |
| WebPPicture* const picture, const uint8_t* const bgr, int bgr_stride); |
| WEBP_EXTERN(int) WebPPictureImportBGRA( |
| WebPPicture* const picture, const uint8_t* const bgra, int bgra_stride); |
| |
| //----------------------------------------------------------------------------- |
| // Main call |
| |
| // Main encoding call, after config and picture have been initialized. |
| // 'picture' must be less than 16384x16384 in dimension, and the 'config' object |
| // must be a valid one. |
| // Returns false in case of error, true otherwise. |
| // In case of error, picture->error_code is updated accordingly. |
| WEBP_EXTERN(int) WebPEncode( |
| const WebPConfig* const config, WebPPicture* const picture); |
| |
| //----------------------------------------------------------------------------- |
| |
| #if defined(__cplusplus) || defined(c_plusplus) |
| } // extern "C" |
| #endif |
| |
| #endif /* WEBP_WEBP_ENCODE_H_ */ |