blob: 8d484c2a53ffa8f590890853ab7206b4e8adedae [file] [log] [blame]
#!/bin/bash
#
# This script generates 'WebP.xcframework', 'WebPDecoder.xcframework',
# 'WebPDemux.xcframework' and 'WebPMux.xcframework'.
# An iOS, Mac or Mac Catalyst app can decode WebP images by including
# 'WebPDecoder.xcframework' and both encode and decode WebP images by including
# 'WebP.xcframework'.
#
# Run ./xcframeworkbuild.sh to generate the frameworks under the current
# directory (the previous build will be erased if it exists).
#
set -e
# Set these variables based on the desired minimum deployment target.
readonly IOS_MIN_VERSION=6.0
readonly MACOSX_MIN_VERSION=10.15
readonly MACOSX_CATALYST_MIN_VERSION=14.0
# Extract Xcode version.
readonly XCODE=$(xcodebuild -version | grep Xcode | cut -d " " -f2)
if [[ -z "${XCODE}" ]] || [[ "${XCODE%%.*}" -lt 11 ]]; then
echo "Xcode 11.0 or higher is required!"
exit 1
fi
# Extract the latest SDK version from the final field of the form: iphoneosX.Y
# / macosxX.Y
readonly SDK=($(
xcodebuild -showsdks \
| grep iphoneos | sort | tail -n 1 | awk '{print substr($NF, 9)}'
xcodebuild -showsdks \
| grep macosx | sort | tail -n 1 | awk '{print substr($NF, 7)}'
))
readonly IOS=0
readonly MACOS=1
readonly IOS_SIMULATOR=2
readonly MACOS_CATALYST=3
readonly NUM_PLATFORMS=4
readonly OLDPATH=${PATH}
# Names should be of the form '<platform>-[<variant>-]<architecture>'.
PLATFORMS[$IOS]="iPhoneOS-armv7 iPhoneOS-armv7s iPhoneOS-arm64"
PLATFORMS[$IOS_SIMULATOR]="iPhoneSimulator-i386 iPhoneSimulator-x86_64"
PLATFORMS[$MACOS]="MacOSX-x86_64"
PLATFORMS[$MACOS_CATALYST]="MacOSX-Catalyst-x86_64"
if [[ "${XCODE%%.*}" -ge 12 ]]; then
PLATFORMS[$MACOS]+=" MacOSX-arm64"
PLATFORMS[$MACOS_CATALYST]+=" MacOSX-Catalyst-arm64"
PLATFORMS[$IOS_SIMULATOR]+=" iPhoneSimulator-arm64"
elif [[ "${XCODE%%.*}" -eq 11 ]]; then
cat << EOF
WARNING: Xcode 12.0 or higher is required to build targets for
WARNING: Apple Silicon (arm64). The XCFrameworks generated with Xcode 11 will
WARNING: contain libraries for MacOS & Catalyst supporting x86_64 only.
WARNING: The build will continue in 5 seconds...
EOF
sleep 5
else
echo "Xcode 11.0 or higher is required!"
exit 1
fi
readonly PLATFORMS
readonly SRCDIR=$(dirname $0)
readonly TOPDIR=$(pwd)
readonly BUILDDIR="${TOPDIR}/xcframeworkbuild"
readonly TARGETDIR="${TOPDIR}/WebP.xcframework"
readonly DECTARGETDIR="${TOPDIR}/WebPDecoder.xcframework"
readonly MUXTARGETDIR="${TOPDIR}/WebPMux.xcframework"
readonly DEMUXTARGETDIR="${TOPDIR}/WebPDemux.xcframework"
readonly DEVELOPER=$(xcode-select --print-path)
readonly DEVROOT="${DEVELOPER}/Toolchains/XcodeDefault.xctoolchain"
readonly PLATFORMSROOT="${DEVELOPER}/Platforms"
readonly LIPO=$(xcrun -sdk iphoneos${SDK[$IOS]} -find lipo)
if [[ -z "${SDK[$IOS]}" ]] || [[ ${SDK[$IOS]%%.*} -lt 8 ]]; then
echo "iOS SDK version 8.0 or higher is required!"
exit 1
fi
#######################################
# Moves Headers/*.h to Headers/<framework>/
#
# Places framework headers in a subdirectory to avoid Xcode errors when using
# multiple frameworks:
# error: Multiple commands produce
# '.../Build/Products/Debug-iphoneos/include/types.h'
# Arguments:
# $1 - path to framework
#######################################
update_headers_path() {
local framework_name="$(basename ${1%.xcframework})"
local subdir
for d in $(find "$1" -path "*/Headers"); do
subdir="$d/$framework_name"
mkdir "$subdir"
mv "$d/"*.h "$subdir"
done
}
echo "Xcode Version: ${XCODE}"
echo "iOS SDK Version: ${SDK[$IOS]}"
echo "MacOS SDK Version: ${SDK[$MACOS]}"
if [[ -e "${BUILDDIR}" || -e "${TARGETDIR}" || -e "${DECTARGETDIR}" \
|| -e "${MUXTARGETDIR}" || -e "${DEMUXTARGETDIR}" ]]; then
cat << EOF
WARNING: The following directories will be deleted:
WARNING: ${BUILDDIR}
WARNING: ${TARGETDIR}
WARNING: ${DECTARGETDIR}
WARNING: ${MUXTARGETDIR}
WARNING: ${DEMUXTARGETDIR}
WARNING: The build will continue in 5 seconds...
EOF
sleep 5
fi
rm -rf ${BUILDDIR} ${TARGETDIR} ${DECTARGETDIR} \
${MUXTARGETDIR} ${DEMUXTARGETDIR}
if [[ ! -e ${SRCDIR}/configure ]]; then
if ! (cd ${SRCDIR} && sh autogen.sh); then
cat << EOF
Error creating configure script!
This script requires the autoconf/automake and libtool to build. MacPorts or
Homebrew can be used to obtain these:
https://www.macports.org/install.php
https://brew.sh/
EOF
exit 1
fi
fi
for (( i = 0; i < $NUM_PLATFORMS; ++i )); do
LIBLIST=()
DECLIBLIST=()
MUXLIBLIST=()
DEMUXLIBLIST=()
for PLATFORM in ${PLATFORMS[$i]}; do
ROOTDIR="${BUILDDIR}/${PLATFORM}"
mkdir -p "${ROOTDIR}"
ARCH="${PLATFORM##*-}"
case "${PLATFORM}" in
iPhone*)
sdk="${SDK[$IOS]}"
;;
MacOS*)
sdk="${SDK[$MACOS]}"
;;
*)
echo "Unrecognized platform: ${PLATFORM}!"
exit 1
;;
esac
SDKROOT="${PLATFORMSROOT}/${PLATFORM%%-*}.platform/"
SDKROOT+="Developer/SDKs/${PLATFORM%%-*}${sdk}.sdk/"
CFLAGS="-pipe -isysroot ${SDKROOT} -O3 -DNDEBUG"
case "${PLATFORM}" in
iPhone*)
CFLAGS+=" -fembed-bitcode"
CFLAGS+=" -target ${ARCH}-apple-ios${IOS_MIN_VERSION}"
[[ "${PLATFORM}" == *Simulator* ]] && CFLAGS+="-simulator"
;;
MacOSX-Catalyst*)
CFLAGS+=" -target"
CFLAGS+=" ${ARCH}-apple-ios${MACOSX_CATALYST_MIN_VERSION}-macabi"
;;
MacOSX*)
CFLAGS+=" -mmacosx-version-min=${MACOSX_MIN_VERSION}"
;;
esac
set -x
export PATH="${DEVROOT}/usr/bin:${OLDPATH}"
${SRCDIR}/configure --host=${ARCH/arm64/aarch64}-apple-darwin \
--build=$(${SRCDIR}/config.guess) \
--prefix=${ROOTDIR} \
--disable-shared --enable-static \
--enable-libwebpdecoder --enable-swap-16bit-csp \
--enable-libwebpmux \
CC="clang -arch ${ARCH}" \
CFLAGS="${CFLAGS}"
set +x
# Build only the libraries, skip the examples.
make V=0 -C sharpyuv
make V=0 -C src install
LIBLIST+=("${ROOTDIR}/lib/libwebp.a")
DECLIBLIST+=("${ROOTDIR}/lib/libwebpdecoder.a")
MUXLIBLIST+=("${ROOTDIR}/lib/libwebpmux.a")
DEMUXLIBLIST+=("${ROOTDIR}/lib/libwebpdemux.a")
# xcodebuild requires a directory for the -headers option, these will match
# for all builds.
make -C src install-data DESTDIR="${ROOTDIR}/lib-headers"
make -C src install-commonHEADERS DESTDIR="${ROOTDIR}/dec-headers"
make -C src/demux install-data DESTDIR="${ROOTDIR}/demux-headers"
make -C src/mux install-data DESTDIR="${ROOTDIR}/mux-headers"
LIB_HEADERS="${ROOTDIR}/lib-headers/${ROOTDIR}/include/webp"
DEC_HEADERS="${ROOTDIR}/dec-headers/${ROOTDIR}/include/webp"
DEMUX_HEADERS="${ROOTDIR}/demux-headers/${ROOTDIR}/include/webp"
MUX_HEADERS="${ROOTDIR}/mux-headers/${ROOTDIR}/include/webp"
make distclean
export PATH=${OLDPATH}
done
[[ -z "${LIBLIST[@]}" ]] && continue
# Create a temporary target directory for each <platform>[-<variant>].
target_dir="${BUILDDIR}/${PLATFORMS[$i]}"
target_dir="${target_dir%% *}"
target_dir="${target_dir%-*}"
target_lib="${target_dir}/$(basename ${LIBLIST[0]})"
target_declib="${target_dir}/$(basename ${DECLIBLIST[0]})"
target_demuxlib="${target_dir}/$(basename ${DEMUXLIBLIST[0]})"
target_muxlib="${target_dir}/$(basename ${MUXLIBLIST[0]})"
mkdir -p "${target_dir}"
${LIPO} -create ${LIBLIST[@]} -output "${target_lib}"
${LIPO} -create ${DECLIBLIST[@]} -output "${target_declib}"
${LIPO} -create ${DEMUXLIBLIST[@]} -output "${target_demuxlib}"
${LIPO} -create ${MUXLIBLIST[@]} -output "${target_muxlib}"
FAT_LIBLIST+=(-library "${target_lib}" -headers "${LIB_HEADERS}")
FAT_DECLIBLIST+=(-library "${target_declib}" -headers "${DEC_HEADERS}")
FAT_DEMUXLIBLIST+=(-library "${target_demuxlib}" -headers "${DEMUX_HEADERS}")
FAT_MUXLIBLIST+=(-library "${target_muxlib}" -headers "${MUX_HEADERS}")
done
# lipo will not put archives with the same architecture (e.g., x86_64
# iPhoneSimulator & MacOS) in the same fat output file. xcodebuild
# -create-xcframework requires universal archives to avoid e.g.:
# Both ios-x86_64-maccatalyst and ios-arm64-maccatalyst represent two
# equivalent library definitions
set -x
xcodebuild -create-xcframework "${FAT_LIBLIST[@]}" \
-output ${TARGETDIR}
xcodebuild -create-xcframework "${FAT_DECLIBLIST[@]}" \
-output ${DECTARGETDIR}
xcodebuild -create-xcframework "${FAT_DEMUXLIBLIST[@]}" \
-output ${DEMUXTARGETDIR}
xcodebuild -create-xcframework "${FAT_MUXLIBLIST[@]}" \
-output ${MUXTARGETDIR}
update_headers_path "${TARGETDIR}"
update_headers_path "${DECTARGETDIR}"
update_headers_path "${DEMUXTARGETDIR}"
update_headers_path "${MUXTARGETDIR}"
set +x
echo "SUCCESS"