Tools/android/flex-2.5.4a/Makefile.in - platform/external/webkit - Git at Google

 # @(#) $Header: /home/daffy/u0/vern/flex/RCS/Makefile.in,v 1.45 96/09/10 16:59:04 vern Exp $ (LBL)

 @SET_MAKE@

 # Possible values for DEFS:
 #
 # By default, flex generates 8-bit scanners when using table compression,
 # and 7-bit scanners when using uncompressed tables (-f or -F options).
 # For flex to always generate 8-bit scanners, add "-DDEFAULT_CSIZE=256"
 # to DEFS.
 #
 # For Vax/VMS, add "-DVMS" to DEFS.
 #
 # For MS-DOS, add "-DMS_DOS" to DEFS.  See the directory MISC/MSDOS for
 # additional info.

 CFLAGS = @CFLAGS@
 CPPFLAGS = @CPPFLAGS@
 DEFS = @DEFS@
 LDFLAGS =
 LIBS = @LIBS@

 # Installation targeting.  Files will be installed under the tree
 # rooted at prefix.  flex will be installed in bindir, libfl.a in
 # libdir, FlexLexer.h will be installed in includedir, and the manual
 # pages will be installed in mandir with extension manext.
 #
 # Raw, unformatted troff source will be installed if INSTALLMAN=man,
 # nroff preformatted versions will be installed if INSTALLMAN=cat.

 prefix = @prefix@
 exec_prefix = @exec_prefix@
 bindir = $(exec_prefix)/bin
 libdir = $(exec_prefix)/lib
 includedir = $(prefix)/include
 manext = 1
 mandir = $(prefix)/man/man$(manext)

 # You can define these to be "lex" and "libl.a" if you want to replace
 # lex at your site.
 FLEX = flex
 FLEXLIB = libfl.a

 INSTALLMAN = man

 SHELL = /bin/sh
 srcdir = @srcdir@
 VPATH = @srcdir@

 LN_S = @LN_S@
 YACC = @YACC@
 CC = @CC@
 AR = ar
 RANLIB = @RANLIB@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@

 # You normally do not need to modify anything below this point.
 # ------------------------------------------------------------

 CPPFLAGS = -I. -I$(srcdir)

 .c.o:
 	$(CC) -c $(CPPFLAGS) $(CFLAGS) $<

 HEADERS = flexdef.h version.h

 SOURCES = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.y \
 	scan.l skel.c sym.c tblcmp.c yylex.c
 OBJECTS = ccl.o dfa.o ecs.o gen.o main.o misc.o nfa.o parse.o \
 	scan.o skel.o sym.o tblcmp.o yylex.o @ALLOCA@

 LIBSRCS = libmain.c libyywrap.c
 LIBOBJS = libmain.o libyywrap.o

 LINTSRCS = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.c \
 	scan.c skel.c sym.c tblcmp.c yylex.c

 DISTFILES = README NEWS COPYING INSTALL FlexLexer.h \
 	configure.in conf.in Makefile.in mkskel.sh flex.skl \
 	$(HEADERS) $(SOURCES) $(LIBSRCS) MISC \
 	flex.1 scan.c install.sh mkinstalldirs configure

 DIST_NAME = flex

 # which "flex" to use to generate scan.c from scan.l
 FLEX_EXEC = ./$(FLEX)
 FLEX_FLAGS = -t $(PERF_REPORT)
 COMPRESSION =
 PERF_REPORT = -p


 all: $(FLEX)

 $(FLEX): .bootstrap $(OBJECTS) $(FLEXLIB)
 	$(CC) $(CFLAGS) -o $(FLEX) $(LDFLAGS) $(OBJECTS) $(FLEXLIB) $(LIBS)

 .bootstrap: initscan.c
 	@rm -f scan.c
 	cp $(srcdir)/initscan.c scan.c
 	touch .bootstrap

 parse.c: parse.y
 	$(YACC) -d $(srcdir)/parse.y
 	@sed '/extern char.*malloc/d' <y.tab.c >parse.tmp
 	@mv parse.tmp parse.c
 	@mv y.tab.h parse.h
 	@rm -f y.tab.c

 parse.h: parse.c

 scan.c: scan.l
 	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l >scan.c
 	@sed s,\"$(srcdir)/scan.l\",\"scan.l\", <scan.c >scan.tmp
 	@mv scan.tmp scan.c

 scan.o: scan.c parse.h flexdef.h config.h
 yylex.o: yylex.c parse.h flexdef.h config.h

 skel.c: flex.skl mkskel.sh
 	$(SHELL) $(srcdir)/mkskel.sh $(srcdir)/flex.skl >skel.c

 main.o: main.c flexdef.h config.h version.h
 ccl.o: ccl.c flexdef.h config.h
 dfa.o: dfa.c flexdef.h config.h
 ecs.o: ecs.c flexdef.h config.h
 gen.o: gen.c flexdef.h config.h
 misc.o: misc.c flexdef.h config.h
 nfa.o: nfa.c flexdef.h config.h
 parse.o: parse.c flexdef.h config.h
 skel.o: skel.c flexdef.h config.h
 sym.o: sym.c flexdef.h config.h
 tblcmp.o: tblcmp.c flexdef.h config.h

 alloca.o: alloca.c
 	$(CC) $(CPPFLAGS) $(CFLAGS) -c -Dxmalloc=yy_flex_xmalloc alloca.c

 alloca.c: $(srcdir)/MISC/alloca.c
 	@rm -f alloca.c
 	cp $(srcdir)/MISC/alloca.c .

 test: check
 check: $(FLEX)
 	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l \
 	| sed s,\"$(srcdir)/scan.l\",\"scan.l\", \
 	| diff scan.c -
 	@echo "Check successful, using COMPRESSION=\"$(COMPRESSION)\""

 bigcheck:
 	rm -f scan.c ; $(MAKE) COMPRESSION="-C" check
 	rm -f scan.c ; $(MAKE) COMPRESSION="-Ce" check
 	rm -f scan.c ; $(MAKE) COMPRESSION="-Cm" check
 	rm -f scan.c ; $(MAKE) COMPRESSION="-f" check
 	rm -f scan.c ; $(MAKE) COMPRESSION="-Cfea" check
 	rm -f scan.c ; $(MAKE) COMPRESSION="-CFer" check
 	rm -f scan.c ; $(MAKE) COMPRESSION="-l" PERF_REPORT="" check
 	rm -f scan.c ; $(MAKE)
 	@echo "All checks successful"

 $(FLEXLIB): $(LIBOBJS)
 	$(AR) cru $(FLEXLIB) $(LIBOBJS)
 	-$(RANLIB) $(FLEXLIB)

 $(FLEX).man: flex.1
 	cd $(srcdir) && nroff -man flex.1 >$(FLEX).man

 install: $(FLEX) $(FLEXLIB) installdirs install.$(INSTALLMAN)
 	$(INSTALL_PROGRAM) $(FLEX) $(bindir)/$(FLEX)
 	@rm -f $(bindir)/$(FLEX)++
 	cd $(bindir) && $(LN_S) $(FLEX) $(FLEX)++
 	$(INSTALL_DATA) $(FLEXLIB) $(libdir)/$(FLEXLIB)
 	-cd $(libdir) && $(RANLIB) $(FLEXLIB)
 	$(INSTALL_DATA) $(srcdir)/FlexLexer.h $(includedir)/FlexLexer.h

 # Note, the following rules delete any vestigial flexdoc installed
 # for a prior flex release.
 install.man: flex.1
 	rm -f $(mandir)/$(FLEX)doc.$(manext)
 	$(INSTALL_DATA) $(srcdir)/flex.1 $(mandir)/$(FLEX).$(manext)

 install.cat: $(FLEX).man
 	rm -f $(mandir)/$(FLEX)doc.$(manext)
 	$(INSTALL_DATA) $(srcdir)/$(FLEX).man $(mandir)/$(FLEX).$(manext)

 installdirs:
 	$(SHELL) $(srcdir)/mkinstalldirs \
 	  $(bindir) $(libdir) $(includedir) $(mandir)

 uninstall:
 	rm -f $(bindir)/$(FLEX) $(bindir)/$(FLEX)++
 	rm -f $(libdir)/$(FLEXLIB)
 	rm -f $(includedir)/FlexLexer.h
 	rm -f $(mandir)/$(FLEX).$(manext) $(mandir)/$(FLEX)doc.$(manext)

 tags: $(SOURCES)
 	ctags $(SOURCES)

 TAGS: $(SOURCES)
 	etags $(SOURCES)

 lint: $(LINTSRCS)
 	lint -Dconst= $(LINTSRCS) > flex.lint

 gcc-lint: $(LINTSRCS)
 	gcc -Dlint -Wall $(LINTSRCS) >flex.gcc-lint 2>&1

 mostlyclean:
 	rm -f a.out *.bak core errs scan.tmp

 clean: mostlyclean
 	rm -f flex parse.c parse.h *.o alloca.c *.lint lex.yy.c lex.yy.cc \
 		$(FLEXLIB) config.log config.cache

 distclean: clean
 	rm -f .bootstrap $(FLEX) scan.c tags TAGS Makefile config.status \
 		config.h stamp-h config.log config.cache

 maintainer-clean: distclean
 	@echo "This command is intended for maintainers to use;"
 	@echo "it deletes files that may require special tools to rebuild."
 	rm -f $(FLEX).man skel.c flex*.tar.gz flex*.tar.Z

 dist: $(FLEX) $(DISTFILES) parse.c parse.h $(srcdir)/$(FLEX).man
 	$(MAKE) DIST_NAME=flex-`sed <version.h 's/[^"]*"//' | sed 's/"//'` dist2

 dist2:
 	@rm -rf $(DIST_NAME)
 	@rm -f $(DIST_NAME).tar $(DIST_NAME).tar.Z $(DIST_NAME).tar.gz
 	@mkdir $(DIST_NAME)
 	tar cf - $(DISTFILES) | (cd $(DIST_NAME) && tar xfB -)
 	@mv $(DIST_NAME)/scan.c $(DIST_NAME)/initscan.c
 	@chmod 444 $(DIST_NAME)/initscan.c
 	@chmod +w $(DIST_NAME)/Makefile.in
 	@cp parse.c parse.h $(DIST_NAME)/MISC
 	@col -b <$(srcdir)/$(FLEX).man >$(DIST_NAME)/MISC/flex.man
 	tar chf $(DIST_NAME).tar $(DIST_NAME)
 	compress <$(DIST_NAME).tar >$(DIST_NAME).tar.Z
 	gzip <$(DIST_NAME).tar >$(DIST_NAME).tar.gz
 	@rm $(DIST_NAME).tar

 # For an explanation of the following Makefile rules, see node
 # `Automatic Remaking' in GNU Autoconf documentation.
 Makefile: $(srcdir)/Makefile.in config.status
 	CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status
 config.status: configure
 	./config.status --recheck
 configure: configure.in
 	cd $(srcdir) && autoconf
 config.h: stamp-h
 stamp-h: conf.in config.status
 	CONFIG_FILES= CONFIG_HEADERS=config.h:conf.in ./config.status
 	echo timestamp >stamp-h
 # conf.in: stamp-h.in
 # stamp-h.in: configure.in acconfig.h
 # 	cd $(srcdir) && autoheader
 # 	config.h.in conf.in
 # 	cho timestamp > $(srcdir)/stamp-h.in

 # Tell versions [3.59,3.63) of GNU make not to export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
	# @(#) $Header: /home/daffy/u0/vern/flex/RCS/Makefile.in,v 1.45 96/09/10 16:59:04 vern Exp $ (LBL)

	@SET_MAKE@

	# Possible values for DEFS:
	#
	# By default, flex generates 8-bit scanners when using table compression,
	# and 7-bit scanners when using uncompressed tables (-f or -F options).
	# For flex to always generate 8-bit scanners, add "-DDEFAULT_CSIZE=256"
	# to DEFS.
	#
	# For Vax/VMS, add "-DVMS" to DEFS.
	#
	# For MS-DOS, add "-DMS_DOS" to DEFS. See the directory MISC/MSDOS for
	# additional info.

	CFLAGS = @CFLAGS@
	CPPFLAGS = @CPPFLAGS@
	DEFS = @DEFS@
	LDFLAGS =
	LIBS = @LIBS@

	# Installation targeting. Files will be installed under the tree
	# rooted at prefix. flex will be installed in bindir, libfl.a in
	# libdir, FlexLexer.h will be installed in includedir, and the manual
	# pages will be installed in mandir with extension manext.
	#
	# Raw, unformatted troff source will be installed if INSTALLMAN=man,
	# nroff preformatted versions will be installed if INSTALLMAN=cat.

	prefix = @prefix@
	exec_prefix = @exec_prefix@
	bindir = $(exec_prefix)/bin
	libdir = $(exec_prefix)/lib
	includedir = $(prefix)/include
	manext = 1
	mandir = $(prefix)/man/man$(manext)

	# You can define these to be "lex" and "libl.a" if you want to replace
	# lex at your site.
	FLEX = flex
	FLEXLIB = libfl.a

	INSTALLMAN = man

	SHELL = /bin/sh
	srcdir = @srcdir@
	VPATH = @srcdir@

	LN_S = @LN_S@
	YACC = @YACC@
	CC = @CC@
	AR = ar
	RANLIB = @RANLIB@
	INSTALL = @INSTALL@
	INSTALL_DATA = @INSTALL_DATA@
	INSTALL_PROGRAM = @INSTALL_PROGRAM@

	# You normally do not need to modify anything below this point.
	# ------------------------------------------------------------

	CPPFLAGS = -I. -I$(srcdir)

	.c.o:
	$(CC) -c $(CPPFLAGS) $(CFLAGS) $<

	HEADERS = flexdef.h version.h

	SOURCES = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.y \
	scan.l skel.c sym.c tblcmp.c yylex.c
	OBJECTS = ccl.o dfa.o ecs.o gen.o main.o misc.o nfa.o parse.o \
	scan.o skel.o sym.o tblcmp.o yylex.o @ALLOCA@

	LIBSRCS = libmain.c libyywrap.c
	LIBOBJS = libmain.o libyywrap.o

	LINTSRCS = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.c \
	scan.c skel.c sym.c tblcmp.c yylex.c

	DISTFILES = README NEWS COPYING INSTALL FlexLexer.h \
	configure.in conf.in Makefile.in mkskel.sh flex.skl \
	$(HEADERS) $(SOURCES) $(LIBSRCS) MISC \
	flex.1 scan.c install.sh mkinstalldirs configure

	DIST_NAME = flex

	# which "flex" to use to generate scan.c from scan.l
	FLEX_EXEC = ./$(FLEX)
	FLEX_FLAGS = -t $(PERF_REPORT)
	COMPRESSION =
	PERF_REPORT = -p


	all: $(FLEX)

	$(FLEX): .bootstrap $(OBJECTS) $(FLEXLIB)
	$(CC) $(CFLAGS) -o $(FLEX) $(LDFLAGS) $(OBJECTS) $(FLEXLIB) $(LIBS)

	.bootstrap: initscan.c
	@rm -f scan.c
	cp $(srcdir)/initscan.c scan.c
	touch .bootstrap

	parse.c: parse.y
	$(YACC) -d $(srcdir)/parse.y
	@sed '/extern char.*malloc/d' <y.tab.c >parse.tmp
	@mv parse.tmp parse.c
	@mv y.tab.h parse.h
	@rm -f y.tab.c

	parse.h: parse.c

	scan.c: scan.l
	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l >scan.c
	@sed s,\"$(srcdir)/scan.l\",\"scan.l\", <scan.c >scan.tmp
	@mv scan.tmp scan.c

	scan.o: scan.c parse.h flexdef.h config.h
	yylex.o: yylex.c parse.h flexdef.h config.h

	skel.c: flex.skl mkskel.sh
	$(SHELL) $(srcdir)/mkskel.sh $(srcdir)/flex.skl >skel.c

	main.o: main.c flexdef.h config.h version.h
	ccl.o: ccl.c flexdef.h config.h
	dfa.o: dfa.c flexdef.h config.h
	ecs.o: ecs.c flexdef.h config.h
	gen.o: gen.c flexdef.h config.h
	misc.o: misc.c flexdef.h config.h
	nfa.o: nfa.c flexdef.h config.h
	parse.o: parse.c flexdef.h config.h
	skel.o: skel.c flexdef.h config.h
	sym.o: sym.c flexdef.h config.h
	tblcmp.o: tblcmp.c flexdef.h config.h

	alloca.o: alloca.c
	$(CC) $(CPPFLAGS) $(CFLAGS) -c -Dxmalloc=yy_flex_xmalloc alloca.c

	alloca.c: $(srcdir)/MISC/alloca.c
	@rm -f alloca.c
	cp $(srcdir)/MISC/alloca.c .

	test: check
	check: $(FLEX)
	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l \
	\| sed s,\"$(srcdir)/scan.l\",\"scan.l\", \
	\| diff scan.c -
	@echo "Check successful, using COMPRESSION=\"$(COMPRESSION)\""

	bigcheck:
	rm -f scan.c ; $(MAKE) COMPRESSION="-C" check
	rm -f scan.c ; $(MAKE) COMPRESSION="-Ce" check
	rm -f scan.c ; $(MAKE) COMPRESSION="-Cm" check
	rm -f scan.c ; $(MAKE) COMPRESSION="-f" check
	rm -f scan.c ; $(MAKE) COMPRESSION="-Cfea" check
	rm -f scan.c ; $(MAKE) COMPRESSION="-CFer" check
	rm -f scan.c ; $(MAKE) COMPRESSION="-l" PERF_REPORT="" check
	rm -f scan.c ; $(MAKE)
	@echo "All checks successful"

	$(FLEXLIB): $(LIBOBJS)
	$(AR) cru $(FLEXLIB) $(LIBOBJS)
	-$(RANLIB) $(FLEXLIB)

	$(FLEX).man: flex.1
	cd $(srcdir) && nroff -man flex.1 >$(FLEX).man

	install: $(FLEX) $(FLEXLIB) installdirs install.$(INSTALLMAN)
	$(INSTALL_PROGRAM) $(FLEX) $(bindir)/$(FLEX)
	@rm -f $(bindir)/$(FLEX)++
	cd $(bindir) && $(LN_S) $(FLEX) $(FLEX)++
	$(INSTALL_DATA) $(FLEXLIB) $(libdir)/$(FLEXLIB)
	-cd $(libdir) && $(RANLIB) $(FLEXLIB)
	$(INSTALL_DATA) $(srcdir)/FlexLexer.h $(includedir)/FlexLexer.h

	# Note, the following rules delete any vestigial flexdoc installed
	# for a prior flex release.
	install.man: flex.1
	rm -f $(mandir)/$(FLEX)doc.$(manext)
	$(INSTALL_DATA) $(srcdir)/flex.1 $(mandir)/$(FLEX).$(manext)

	install.cat: $(FLEX).man
	rm -f $(mandir)/$(FLEX)doc.$(manext)
	$(INSTALL_DATA) $(srcdir)/$(FLEX).man $(mandir)/$(FLEX).$(manext)

	installdirs:
	$(SHELL) $(srcdir)/mkinstalldirs \
	$(bindir) $(libdir) $(includedir) $(mandir)

	uninstall:
	rm -f $(bindir)/$(FLEX) $(bindir)/$(FLEX)++
	rm -f $(libdir)/$(FLEXLIB)
	rm -f $(includedir)/FlexLexer.h
	rm -f $(mandir)/$(FLEX).$(manext) $(mandir)/$(FLEX)doc.$(manext)

	tags: $(SOURCES)
	ctags $(SOURCES)

	TAGS: $(SOURCES)
	etags $(SOURCES)

	lint: $(LINTSRCS)
	lint -Dconst= $(LINTSRCS) > flex.lint

	gcc-lint: $(LINTSRCS)
	gcc -Dlint -Wall $(LINTSRCS) >flex.gcc-lint 2>&1

	mostlyclean:
	rm -f a.out *.bak core errs scan.tmp

	clean: mostlyclean
	rm -f flex parse.c parse.h .o alloca.c .lint lex.yy.c lex.yy.cc \
	$(FLEXLIB) config.log config.cache

	distclean: clean
	rm -f .bootstrap $(FLEX) scan.c tags TAGS Makefile config.status \
	config.h stamp-h config.log config.cache

	maintainer-clean: distclean
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."
	rm -f $(FLEX).man skel.c flex.tar.gz flex.tar.Z

	dist: $(FLEX) $(DISTFILES) parse.c parse.h $(srcdir)/$(FLEX).man
	$(MAKE) DIST_NAME=flex-`sed <version.h 's/[^"]*"//' \| sed 's/"//'` dist2

	dist2:
	@rm -rf $(DIST_NAME)
	@rm -f $(DIST_NAME).tar $(DIST_NAME).tar.Z $(DIST_NAME).tar.gz
	@mkdir $(DIST_NAME)
	tar cf - $(DISTFILES) \| (cd $(DIST_NAME) && tar xfB -)
	@mv $(DIST_NAME)/scan.c $(DIST_NAME)/initscan.c
	@chmod 444 $(DIST_NAME)/initscan.c
	@chmod +w $(DIST_NAME)/Makefile.in
	@cp parse.c parse.h $(DIST_NAME)/MISC
	@col -b <$(srcdir)/$(FLEX).man >$(DIST_NAME)/MISC/flex.man
	tar chf $(DIST_NAME).tar $(DIST_NAME)
	compress <$(DIST_NAME).tar >$(DIST_NAME).tar.Z
	gzip <$(DIST_NAME).tar >$(DIST_NAME).tar.gz
	@rm $(DIST_NAME).tar

	# For an explanation of the following Makefile rules, see node
	# `Automatic Remaking' in GNU Autoconf documentation.
	Makefile: $(srcdir)/Makefile.in config.status
	CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status
	config.status: configure
	./config.status --recheck
	configure: configure.in
	cd $(srcdir) && autoconf
	config.h: stamp-h
	stamp-h: conf.in config.status
	CONFIG_FILES= CONFIG_HEADERS=config.h:conf.in ./config.status
	echo timestamp >stamp-h
	# conf.in: stamp-h.in
	# stamp-h.in: configure.in acconfig.h
	# cd $(srcdir) && autoheader
	# config.h.in conf.in
	# cho timestamp > $(srcdir)/stamp-h.in

	# Tell versions [3.59,3.63) of GNU make not to export all variables.
	# Otherwise a system limit (for SysV at least) may be exceeded.
	.NOEXPORT: