| |
| /*---------------------------------------------------------------*/ |
| /*--- begin libvex.h ---*/ |
| /*---------------------------------------------------------------*/ |
| |
| /* |
| This file is part of Valgrind, a dynamic binary instrumentation |
| framework. |
| |
| Copyright (C) 2004-2013 OpenWorks LLP |
| info@open-works.net |
| |
| This program is free software; you can redistribute it and/or |
| modify it under the terms of the GNU General Public License as |
| published by the Free Software Foundation; either version 2 of the |
| License, or (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| 02110-1301, USA. |
| |
| The GNU General Public License is contained in the file COPYING. |
| |
| Neither the names of the U.S. Department of Energy nor the |
| University of California nor the names of its contributors may be |
| used to endorse or promote products derived from this software |
| without prior written permission. |
| */ |
| |
| #ifndef __LIBVEX_H |
| #define __LIBVEX_H |
| |
| |
| #include "libvex_basictypes.h" |
| #include "libvex_ir.h" |
| |
| |
| /*---------------------------------------------------------------*/ |
| /*--- This file defines the top-level interface to LibVEX. ---*/ |
| /*---------------------------------------------------------------*/ |
| |
| /*-------------------------------------------------------*/ |
| /*--- Architectures, variants, and other arch info ---*/ |
| /*-------------------------------------------------------*/ |
| |
| typedef |
| enum { |
| VexArch_INVALID=0x400, |
| VexArchX86, |
| VexArchAMD64, |
| VexArchARM, |
| VexArchARM64, |
| VexArchPPC32, |
| VexArchPPC64, |
| VexArchS390X, |
| VexArchMIPS32, |
| VexArchMIPS64 |
| } |
| VexArch; |
| |
| |
| /* Information about endianness. */ |
| typedef |
| enum { |
| VexEndness_INVALID=0x600, /* unknown endianness */ |
| VexEndnessLE, /* little endian */ |
| VexEndnessBE /* big endian */ |
| } |
| VexEndness; |
| |
| |
| /* For a given architecture, these specify extra capabilities beyond |
| the minimum supported (baseline) capabilities. They may be OR'd |
| together, although some combinations don't make sense. (eg, SSE2 |
| but not SSE1). LibVEX_Translate will check for nonsensical |
| combinations. */ |
| |
| /* x86: baseline capability is Pentium-1 (FPU, MMX, but no SSE), with |
| cmpxchg8b. MMXEXT is a special AMD only subset of SSE1 (Integer SSE). */ |
| #define VEX_HWCAPS_X86_MMXEXT (1<<1) /* A subset of SSE1 on early AMD */ |
| #define VEX_HWCAPS_X86_SSE1 (1<<2) /* SSE1 support (Pentium III) */ |
| #define VEX_HWCAPS_X86_SSE2 (1<<3) /* SSE2 support (Pentium 4) */ |
| #define VEX_HWCAPS_X86_SSE3 (1<<4) /* SSE3 support (>= Prescott) */ |
| #define VEX_HWCAPS_X86_LZCNT (1<<5) /* SSE4a LZCNT insn */ |
| |
| /* amd64: baseline capability is SSE2, with cmpxchg8b but not |
| cmpxchg16b. */ |
| #define VEX_HWCAPS_AMD64_SSE3 (1<<5) /* SSE3 support */ |
| #define VEX_HWCAPS_AMD64_CX16 (1<<6) /* cmpxchg16b support */ |
| #define VEX_HWCAPS_AMD64_LZCNT (1<<7) /* SSE4a LZCNT insn */ |
| #define VEX_HWCAPS_AMD64_AVX (1<<8) /* AVX instructions */ |
| #define VEX_HWCAPS_AMD64_RDTSCP (1<<9) /* RDTSCP instruction */ |
| #define VEX_HWCAPS_AMD64_BMI (1<<10) /* BMI1 instructions */ |
| #define VEX_HWCAPS_AMD64_AVX2 (1<<11) /* AVX2 instructions */ |
| |
| /* ppc32: baseline capability is integer only */ |
| #define VEX_HWCAPS_PPC32_F (1<<8) /* basic (non-optional) FP */ |
| #define VEX_HWCAPS_PPC32_V (1<<9) /* Altivec (VMX) */ |
| #define VEX_HWCAPS_PPC32_FX (1<<10) /* FP extns (fsqrt, fsqrts) */ |
| #define VEX_HWCAPS_PPC32_GX (1<<11) /* Graphics extns |
| (fres,frsqrte,fsel,stfiwx) */ |
| #define VEX_HWCAPS_PPC32_VX (1<<12) /* Vector-scalar floating-point (VSX); implies ISA 2.06 or higher */ |
| #define VEX_HWCAPS_PPC32_DFP (1<<17) /* Decimal Floating Point (DFP) -- e.g., dadd */ |
| #define VEX_HWCAPS_PPC32_ISA2_07 (1<<19) /* ISA 2.07 -- e.g., mtvsrd */ |
| |
| /* ppc64: baseline capability is integer and basic FP insns */ |
| #define VEX_HWCAPS_PPC64_V (1<<13) /* Altivec (VMX) */ |
| #define VEX_HWCAPS_PPC64_FX (1<<14) /* FP extns (fsqrt, fsqrts) */ |
| #define VEX_HWCAPS_PPC64_GX (1<<15) /* Graphics extns |
| (fres,frsqrte,fsel,stfiwx) */ |
| #define VEX_HWCAPS_PPC64_VX (1<<16) /* Vector-scalar floating-point (VSX); implies ISA 2.06 or higher */ |
| #define VEX_HWCAPS_PPC64_DFP (1<<18) /* Decimal Floating Point (DFP) -- e.g., dadd */ |
| #define VEX_HWCAPS_PPC64_ISA2_07 (1<<20) /* ISA 2.07 -- e.g., mtvsrd */ |
| |
| /* s390x: Hardware capability encoding |
| |
| Bits [26:31] encode the machine model (see VEX_S390X_MODEL... below) |
| Bits [0:20] encode specific hardware capabilities |
| (see VEX_HWAPS_S390X_... below) |
| */ |
| |
| /* Model numbers must be assigned in chronological order. |
| They are used as array index. */ |
| #define VEX_S390X_MODEL_Z900 0 |
| #define VEX_S390X_MODEL_Z800 1 |
| #define VEX_S390X_MODEL_Z990 2 |
| #define VEX_S390X_MODEL_Z890 3 |
| #define VEX_S390X_MODEL_Z9_EC 4 |
| #define VEX_S390X_MODEL_Z9_BC 5 |
| #define VEX_S390X_MODEL_Z10_EC 6 |
| #define VEX_S390X_MODEL_Z10_BC 7 |
| #define VEX_S390X_MODEL_Z196 8 |
| #define VEX_S390X_MODEL_Z114 9 |
| #define VEX_S390X_MODEL_ZEC12 10 |
| #define VEX_S390X_MODEL_ZBC12 11 |
| #define VEX_S390X_MODEL_UNKNOWN 12 /* always last in list */ |
| #define VEX_S390X_MODEL_MASK 0x3F |
| |
| #define VEX_HWCAPS_S390X_LDISP (1<<6) /* Long-displacement facility */ |
| #define VEX_HWCAPS_S390X_EIMM (1<<7) /* Extended-immediate facility */ |
| #define VEX_HWCAPS_S390X_GIE (1<<8) /* General-instruction-extension facility */ |
| #define VEX_HWCAPS_S390X_DFP (1<<9) /* Decimal floating point facility */ |
| #define VEX_HWCAPS_S390X_FGX (1<<10) /* FPR-GR transfer facility */ |
| #define VEX_HWCAPS_S390X_ETF2 (1<<11) /* ETF2-enhancement facility */ |
| #define VEX_HWCAPS_S390X_STFLE (1<<12) /* STFLE facility */ |
| #define VEX_HWCAPS_S390X_ETF3 (1<<13) /* ETF3-enhancement facility */ |
| #define VEX_HWCAPS_S390X_STCKF (1<<14) /* STCKF facility */ |
| #define VEX_HWCAPS_S390X_FPEXT (1<<15) /* Floating point extension facility */ |
| #define VEX_HWCAPS_S390X_LSC (1<<16) /* Conditional load/store facility */ |
| #define VEX_HWCAPS_S390X_PFPO (1<<17) /* Perform floating point ops facility */ |
| |
| /* Special value representing all available s390x hwcaps */ |
| #define VEX_HWCAPS_S390X_ALL (VEX_HWCAPS_S390X_LDISP | \ |
| VEX_HWCAPS_S390X_EIMM | \ |
| VEX_HWCAPS_S390X_GIE | \ |
| VEX_HWCAPS_S390X_DFP | \ |
| VEX_HWCAPS_S390X_FGX | \ |
| VEX_HWCAPS_S390X_STFLE | \ |
| VEX_HWCAPS_S390X_STCKF | \ |
| VEX_HWCAPS_S390X_FPEXT | \ |
| VEX_HWCAPS_S390X_LSC | \ |
| VEX_HWCAPS_S390X_ETF3 | \ |
| VEX_HWCAPS_S390X_ETF2 | \ |
| VEX_HWCAPS_S390X_PFPO) |
| |
| #define VEX_HWCAPS_S390X(x) ((x) & ~VEX_S390X_MODEL_MASK) |
| #define VEX_S390X_MODEL(x) ((x) & VEX_S390X_MODEL_MASK) |
| |
| /* arm: baseline capability is ARMv4 */ |
| /* Bits 5:0 - architecture level (e.g. 5 for v5, 6 for v6 etc) */ |
| #define VEX_HWCAPS_ARM_VFP (1<<6) /* VFP extension */ |
| #define VEX_HWCAPS_ARM_VFP2 (1<<7) /* VFPv2 */ |
| #define VEX_HWCAPS_ARM_VFP3 (1<<8) /* VFPv3 */ |
| /* Bits 15:10 reserved for (possible) future VFP revisions */ |
| #define VEX_HWCAPS_ARM_NEON (1<<16) /* Advanced SIMD also known as NEON */ |
| |
| /* Get an ARM architecure level from HWCAPS */ |
| #define VEX_ARM_ARCHLEVEL(x) ((x) & 0x3f) |
| |
| /* ARM64: baseline capability is AArch64 v8. */ |
| /* (no definitions since no variants so far) */ |
| |
| /* MIPS baseline capability */ |
| /* Assigned Company values for bits 23:16 of the PRId Register |
| (CP0 register 15, select 0). As of the MIPS32 and MIPS64 specs from |
| MTI, the PRId register is defined in this (backwards compatible) |
| way: |
| |
| +----------------+----------------+----------------+----------------+ |
| | Company Options| Company ID | Processor ID | Revision | |
| +----------------+----------------+----------------+----------------+ |
| 31 24 23 16 15 8 7 |
| |
| */ |
| |
| #define VEX_PRID_COMP_MIPS 0x00010000 |
| #define VEX_PRID_COMP_BROADCOM 0x00020000 |
| #define VEX_PRID_COMP_NETLOGIC 0x000C0000 |
| #define VEX_PRID_COMP_CAVIUM 0x000D0000 |
| |
| /* |
| * These are the PRID's for when 23:16 == PRID_COMP_MIPS |
| */ |
| #define VEX_PRID_IMP_34K 0x9500 |
| #define VEX_PRID_IMP_74K 0x9700 |
| |
| /* CPU has FPU and 32 dbl. prec. FP registers */ |
| #define VEX_PRID_CPU_32FPR 0x00000040 |
| |
| /* Get MIPS Company ID from HWCAPS */ |
| #define VEX_MIPS_COMP_ID(x) ((x) & 0x00FF0000) |
| /* Get MIPS Processor ID from HWCAPS */ |
| #define VEX_MIPS_PROC_ID(x) ((x) & 0x0000FF00) |
| /* Get MIPS Revision from HWCAPS */ |
| #define VEX_MIPS_REV(x) ((x) & 0x000000FF) |
| /* Check if the processor supports DSP ASE Rev 2. */ |
| #define VEX_MIPS_PROC_DSP2(x) ((VEX_MIPS_COMP_ID(x) == VEX_PRID_COMP_MIPS) && \ |
| (VEX_MIPS_PROC_ID(x) == VEX_PRID_IMP_74K)) |
| /* Check if the processor supports DSP ASE Rev 1. */ |
| #define VEX_MIPS_PROC_DSP(x) (VEX_MIPS_PROC_DSP2(x) || \ |
| ((VEX_MIPS_COMP_ID(x) == VEX_PRID_COMP_MIPS) && \ |
| (VEX_MIPS_PROC_ID(x) == VEX_PRID_IMP_34K))) |
| |
| /* These return statically allocated strings. */ |
| |
| extern const HChar* LibVEX_ppVexArch ( VexArch ); |
| extern const HChar* LibVEX_ppVexEndness ( VexEndness endness ); |
| extern const HChar* LibVEX_ppVexHwCaps ( VexArch, UInt ); |
| |
| |
| /* The various kinds of caches */ |
| typedef enum { |
| DATA_CACHE=0x500, |
| INSN_CACHE, |
| UNIFIED_CACHE |
| } VexCacheKind; |
| |
| /* Information about a particular cache */ |
| typedef struct { |
| VexCacheKind kind; |
| UInt level; /* level this cache is at, e.g. 1 for L1 cache */ |
| UInt sizeB; /* size of this cache in bytes */ |
| UInt line_sizeB; /* cache line size in bytes */ |
| UInt assoc; /* set associativity */ |
| Bool is_trace_cache; /* False, except for certain Pentium 4 models */ |
| } VexCache; |
| |
| /* Convenience macro to initialise a VexCache */ |
| #define VEX_CACHE_INIT(_kind, _level, _size, _line_size, _assoc) \ |
| ({ (VexCache) { .kind = _kind, .level = _level, .sizeB = _size, \ |
| .line_sizeB = _line_size, .assoc = _assoc, \ |
| .is_trace_cache = False }; }) |
| |
| /* Information about the cache system as a whole */ |
| typedef struct { |
| UInt num_levels; |
| UInt num_caches; |
| /* Unordered array of caches for this host. NULL if there are |
| no caches. The following can always be assumed: |
| (1) There is at most one cache of a given kind per cache level. |
| (2) If there exists a unified cache at a particular level then |
| no other cache exists at that level. |
| (3) The existence of a cache at level N > 1 implies the existence of |
| at least one cache at level N-1. */ |
| VexCache *caches; |
| Bool icaches_maintain_coherence; |
| } VexCacheInfo; |
| |
| |
| /* This struct is a bit of a hack, but is needed to carry misc |
| important bits of info about an arch. Fields which are meaningless |
| or ignored for the platform in question should be set to zero. |
| Nb: if you add fields to the struct make sure to update function |
| LibVEX_default_VexArchInfo. */ |
| |
| typedef |
| struct { |
| /* The following three fields are mandatory. */ |
| UInt hwcaps; |
| VexEndness endness; |
| VexCacheInfo hwcache_info; |
| /* PPC32/PPC64 only: size of instruction cache line */ |
| Int ppc_icache_line_szB; |
| /* PPC32/PPC64 only: sizes zeroed by the dcbz/dcbzl instructions |
| (bug#135264) */ |
| UInt ppc_dcbz_szB; |
| UInt ppc_dcbzl_szB; /* 0 means unsupported (SIGILL) */ |
| /* ARM64: I- and D- minimum line sizes in log2(bytes), as |
| obtained from ctr_el0.DminLine and .IminLine. For example, a |
| line size of 64 bytes would be encoded here as 6. */ |
| UInt arm64_dMinLine_lg2_szB; |
| UInt arm64_iMinLine_lg2_szB; |
| } |
| VexArchInfo; |
| |
| /* Write default settings info *vai. */ |
| extern |
| void LibVEX_default_VexArchInfo ( /*OUT*/VexArchInfo* vai ); |
| |
| |
| /* This struct carries guest and host ABI variant information that may |
| be needed. Fields which are meaningless or ignored for the |
| platform in question should be set to zero. |
| |
| Settings which are believed to be correct are: |
| |
| guest_stack_redzone_size |
| guest is ppc32-linux ==> 0 |
| guest is ppc64-linux ==> 288 |
| guest is amd64-linux ==> 128 |
| guest is other ==> inapplicable |
| |
| guest_amd64_assume_fs_is_const |
| guest is amd64-linux ==> True |
| guest is amd64-darwin ==> False |
| guest is other ==> inapplicable |
| |
| guest_amd64_assume_gs_is_const |
| guest is amd64-darwin ==> True |
| guest is amd64-linux ==> True |
| guest is other ==> inapplicable |
| |
| guest_ppc_zap_RZ_at_blr |
| guest is ppc64-linux ==> True |
| guest is ppc32-linux ==> False |
| guest is other ==> inapplicable |
| |
| guest_ppc_zap_RZ_at_bl |
| guest is ppc64-linux ==> const True |
| guest is ppc32-linux ==> const False |
| guest is other ==> inapplicable |
| |
| host_ppc_calls_use_fndescrs: |
| host is ppc32-linux ==> False |
| host is ppc64-linux ==> True |
| host is other ==> inapplicable |
| */ |
| |
| typedef |
| struct { |
| /* PPC and AMD64 GUESTS only: how many bytes below the |
| stack pointer are validly addressible? */ |
| Int guest_stack_redzone_size; |
| |
| /* AMD64 GUESTS only: should we translate %fs-prefixed |
| instructions using the assumption that %fs always contains |
| the same value? (typically zero on linux) */ |
| Bool guest_amd64_assume_fs_is_const; |
| |
| /* AMD64 GUESTS only: should we translate %gs-prefixed |
| instructions using the assumption that %gs always contains |
| the same value? (typically 0x60 on darwin)? */ |
| Bool guest_amd64_assume_gs_is_const; |
| |
| /* PPC GUESTS only: should we zap the stack red zone at a 'blr' |
| (function return) ? */ |
| Bool guest_ppc_zap_RZ_at_blr; |
| |
| /* PPC GUESTS only: should we zap the stack red zone at a 'bl' |
| (function call) ? Is supplied with the guest address of the |
| target of the call since that may be significant. If NULL, |
| is assumed equivalent to a fn which always returns False. */ |
| Bool (*guest_ppc_zap_RZ_at_bl)(Addr64); |
| |
| /* PPC32/PPC64 HOSTS only: does '&f' give us a pointer to a |
| function descriptor on the host, or to the function code |
| itself? True => descriptor, False => code. */ |
| Bool host_ppc_calls_use_fndescrs; |
| } |
| VexAbiInfo; |
| |
| /* Write default settings info *vbi. */ |
| extern |
| void LibVEX_default_VexAbiInfo ( /*OUT*/VexAbiInfo* vbi ); |
| |
| |
| /*-------------------------------------------------------*/ |
| /*--- Control of Vex's optimiser (iropt). ---*/ |
| /*-------------------------------------------------------*/ |
| |
| |
| /* VexRegisterUpdates specifies when to ensure that the guest state is |
| up to date. |
| |
| VexRegUpdSpAtMemAccess : all registers are updated at superblock |
| exits, SP is up to date at memory exception points. The SP is described |
| by the arch specific functions guest_<arch>_state_requires_precise_mem_exns. |
| |
| VexRegUpdUnwindregsAtMemAccess : registers needed to make a stack trace are |
| up to date at memory exception points. Typically, these are PC/SP/FP. The |
| minimal registers are described by the arch specific functions |
| guest_<arch>_state_requires_precise_mem_exns. |
| |
| VexRegUpdAllregsAtMemAccess : all registers up to date at memory exception |
| points. |
| |
| VexRegUpdAllregsAtEachInsn : all registers up to date at each instruction. */ |
| typedef enum { VexRegUpdSpAtMemAccess=0x700, |
| VexRegUpdUnwindregsAtMemAccess, |
| VexRegUpdAllregsAtMemAccess, |
| VexRegUpdAllregsAtEachInsn } VexRegisterUpdates; |
| |
| /* Control of Vex's optimiser. */ |
| |
| typedef |
| struct { |
| /* Controls verbosity of iropt. 0 = no output. */ |
| Int iropt_verbosity; |
| /* Control aggressiveness of iropt. 0 = no opt, 1 = simple |
| opts, 2 (default) = max optimisation. */ |
| Int iropt_level; |
| /* Controls when registers are updated in guest state. */ |
| VexRegisterUpdates iropt_register_updates; |
| /* How aggressive should iropt be in unrolling loops? Higher |
| numbers make it more enthusiastic about loop unrolling. |
| Default=120. A setting of zero disables unrolling. */ |
| Int iropt_unroll_thresh; |
| /* What's the maximum basic block length the front end(s) allow? |
| BBs longer than this are split up. Default=50 (guest |
| insns). */ |
| Int guest_max_insns; |
| /* How aggressive should front ends be in following |
| unconditional branches to known destinations? Default=10, |
| meaning that if a block contains less than 10 guest insns so |
| far, the front end(s) will attempt to chase into its |
| successor. A setting of zero disables chasing. */ |
| Int guest_chase_thresh; |
| /* EXPERIMENTAL: chase across conditional branches? Not all |
| front ends honour this. Default: NO. */ |
| Bool guest_chase_cond; |
| } |
| VexControl; |
| |
| |
| /* Write the default settings into *vcon. */ |
| |
| extern |
| void LibVEX_default_VexControl ( /*OUT*/ VexControl* vcon ); |
| |
| |
| /*-------------------------------------------------------*/ |
| /*--- Storage management control ---*/ |
| /*-------------------------------------------------------*/ |
| |
| /* Allocate in Vex's temporary allocation area. Be careful with this. |
| You can only call it inside an instrumentation or optimisation |
| callback that you have previously specified in a call to |
| LibVEX_Translate. The storage allocated will only stay alive until |
| translation of the current basic block is complete. */ |
| extern void* LibVEX_Alloc ( Int nbytes ); |
| |
| /* Show Vex allocation statistics. */ |
| extern void LibVEX_ShowAllocStats ( void ); |
| |
| |
| /*-------------------------------------------------------*/ |
| /*--- Describing guest state layout ---*/ |
| /*-------------------------------------------------------*/ |
| |
| /* Describe the guest state enough that the instrumentation |
| functions can work. */ |
| |
| /* The max number of guest state chunks which we can describe as |
| always defined (for the benefit of Memcheck). */ |
| #define VEXGLO_N_ALWAYSDEFD 24 |
| |
| typedef |
| struct { |
| /* Total size of the guest state, in bytes. Must be |
| 16-aligned. */ |
| Int total_sizeB; |
| /* Whereabouts is the stack pointer? */ |
| Int offset_SP; |
| Int sizeof_SP; /* 4 or 8 */ |
| /* Whereabouts is the frame pointer? */ |
| Int offset_FP; |
| Int sizeof_FP; /* 4 or 8 */ |
| /* Whereabouts is the instruction pointer? */ |
| Int offset_IP; |
| Int sizeof_IP; /* 4 or 8 */ |
| /* Describe parts of the guest state regarded as 'always |
| defined'. */ |
| Int n_alwaysDefd; |
| struct { |
| Int offset; |
| Int size; |
| } alwaysDefd[VEXGLO_N_ALWAYSDEFD]; |
| } |
| VexGuestLayout; |
| |
| /* A note about guest state layout. |
| |
| LibVEX defines the layout for the guest state, in the file |
| pub/libvex_guest_<arch>.h. The struct will have an 16-aligned |
| size. Each translated bb is assumed to be entered with a specified |
| register pointing at such a struct. Beyond that is two copies of |
| the shadow state area with the same size as the struct. Beyond |
| that is a spill area that LibVEX may spill into. It must have size |
| LibVEX_N_SPILL_BYTES, and this must be a 16-aligned number. |
| |
| On entry, the baseblock pointer register must be 16-aligned. |
| |
| There must be no holes in between the primary guest state, its two |
| copies, and the spill area. In short, all 4 areas must have a |
| 16-aligned size and be 16-aligned, and placed back-to-back. |
| */ |
| |
| #define LibVEX_N_SPILL_BYTES 4096 |
| |
| |
| /*-------------------------------------------------------*/ |
| /*--- Initialisation of the library ---*/ |
| /*-------------------------------------------------------*/ |
| |
| /* Initialise the library. You must call this first. */ |
| |
| extern void LibVEX_Init ( |
| |
| /* failure exit function */ |
| # if __cplusplus == 1 && __GNUC__ && __GNUC__ <= 3 |
| /* g++ 3.x doesn't understand attributes on function parameters. |
| See #265762. */ |
| # else |
| __attribute__ ((noreturn)) |
| # endif |
| void (*failure_exit) ( void ), |
| |
| /* logging output function */ |
| void (*log_bytes) ( HChar*, Int nbytes ), |
| |
| /* debug paranoia level */ |
| Int debuglevel, |
| |
| /* Control ... */ |
| const VexControl* vcon |
| ); |
| |
| |
| /*-------------------------------------------------------*/ |
| /*--- Make a translation ---*/ |
| /*-------------------------------------------------------*/ |
| |
| /* Describes the outcome of a translation attempt. */ |
| typedef |
| struct { |
| /* overall status */ |
| enum { VexTransOK=0x800, |
| VexTransAccessFail, VexTransOutputFull } status; |
| /* The number of extents that have a self-check (0 to 3) */ |
| UInt n_sc_extents; |
| /* Offset in generated code of the profile inc, or -1 if |
| none. Needed for later patching. */ |
| Int offs_profInc; |
| /* Stats only: the number of guest insns included in the |
| translation. It may be zero (!). */ |
| UInt n_guest_instrs; |
| } |
| VexTranslateResult; |
| |
| |
| /* Describes precisely the pieces of guest code that a translation |
| covers. Now that Vex can chase across BB boundaries, the old |
| scheme of describing a chunk of guest code merely by its start |
| address and length is inadequate. |
| |
| Hopefully this struct is only 32 bytes long. Space is important as |
| clients will have to store one of these for each translation made. |
| */ |
| typedef |
| struct { |
| Addr64 base[3]; |
| UShort len[3]; |
| UShort n_used; |
| } |
| VexGuestExtents; |
| |
| |
| /* A structure to carry arguments for LibVEX_Translate. There are so |
| many of them, it seems better to have a structure. */ |
| typedef |
| struct { |
| /* IN: The instruction sets we are translating from and to. And |
| guest/host misc info. */ |
| VexArch arch_guest; |
| VexArchInfo archinfo_guest; |
| VexArch arch_host; |
| VexArchInfo archinfo_host; |
| VexAbiInfo abiinfo_both; |
| |
| /* IN: an opaque value which is passed as the first arg to all |
| callback functions supplied in this struct. Vex has no idea |
| what's at the other end of this pointer. */ |
| void* callback_opaque; |
| |
| /* IN: the block to translate, and its guest address. */ |
| /* where are the actual bytes in the host's address space? */ |
| const UChar* guest_bytes; |
| /* where do the bytes really come from in the guest's aspace? |
| This is the post-redirection guest address. Not that Vex |
| understands anything about redirection; that is all done on |
| the Valgrind side. */ |
| Addr64 guest_bytes_addr; |
| |
| /* Is it OK to chase into this guest address? May not be |
| NULL. */ |
| Bool (*chase_into_ok) ( /*callback_opaque*/void*, Addr64 ); |
| |
| /* OUT: which bits of guest code actually got translated */ |
| VexGuestExtents* guest_extents; |
| |
| /* IN: a place to put the resulting code, and its size */ |
| UChar* host_bytes; |
| Int host_bytes_size; |
| /* OUT: how much of the output area is used. */ |
| Int* host_bytes_used; |
| |
| /* IN: optionally, two instrumentation functions. May be |
| NULL. */ |
| IRSB* (*instrument1) ( /*callback_opaque*/void*, |
| IRSB*, |
| const VexGuestLayout*, |
| const VexGuestExtents*, |
| const VexArchInfo*, |
| IRType gWordTy, IRType hWordTy ); |
| IRSB* (*instrument2) ( /*callback_opaque*/void*, |
| IRSB*, |
| const VexGuestLayout*, |
| const VexGuestExtents*, |
| const VexArchInfo*, |
| IRType gWordTy, IRType hWordTy ); |
| |
| IRSB* (*finaltidy) ( IRSB* ); |
| |
| /* IN: a callback used to ask the caller which of the extents, |
| if any, a self check is required for. Must not be NULL. |
| The returned value is a bitmask with a 1 in position i indicating |
| that the i'th extent needs a check. Since there can be at most |
| 3 extents, the returned values must be between 0 and 7. */ |
| UInt (*needs_self_check)( /*callback_opaque*/void*, |
| const VexGuestExtents* ); |
| |
| /* IN: optionally, a callback which allows the caller to add its |
| own IR preamble following the self-check and any other |
| VEX-generated preamble, if any. May be NULL. If non-NULL, |
| the IRSB under construction is handed to this function, which |
| presumably adds IR statements to it. The callback may |
| optionally complete the block and direct bb_to_IR not to |
| disassemble any instructions into it; this is indicated by |
| the callback returning True. |
| */ |
| Bool (*preamble_function)(/*callback_opaque*/void*, IRSB*); |
| |
| /* IN: debug: trace vex activity at various points */ |
| Int traceflags; |
| |
| /* IN: debug: print diagnostics when an illegal instr is detected */ |
| Bool sigill_diag; |
| |
| /* IN: profiling: add a 64 bit profiler counter increment to the |
| translation? */ |
| Bool addProfInc; |
| |
| /* IN: address of the dispatcher entry points. Describes the |
| places where generated code should jump to at the end of each |
| bb. |
| |
| At the end of each translation, the next guest address is |
| placed in the host's standard return register (x86: %eax, |
| amd64: %rax, ppc32: %r3, ppc64: %r3). Optionally, the guest |
| state pointer register (on host x86: %ebp; amd64: %rbp; |
| ppc32/64: r31) may be set to a VEX_TRC_ value to indicate any |
| special action required before the next block is run. |
| |
| Control is then passed back to the dispatcher (beyond Vex's |
| control; caller supplies this) in the following way: |
| |
| - On host archs which lack a link register (x86, amd64), by a |
| jump to the host address specified in |
| 'dispatcher_assisted', if the guest state pointer has been |
| changed so as to request some action before the next block |
| is run, or 'dispatcher_unassisted' (the fast path), in |
| which it is assumed that the guest state pointer is |
| unchanged and we wish to continue directly with the next |
| translation. Both of these must be non-NULL. |
| |
| - On host archs which have a link register (ppc32, ppc64), by |
| a branch to the link register (which is guaranteed to be |
| unchanged from whatever it was at entry to the |
| translation). 'dispatch_assisted' and |
| 'dispatch_unassisted' must be NULL. |
| |
| The aim is to get back and forth between translations and the |
| dispatcher without creating memory traffic to store return |
| addresses. |
| |
| FIXME: update this comment |
| */ |
| const void* disp_cp_chain_me_to_slowEP; |
| const void* disp_cp_chain_me_to_fastEP; |
| const void* disp_cp_xindir; |
| const void* disp_cp_xassisted; |
| } |
| VexTranslateArgs; |
| |
| |
| extern |
| VexTranslateResult LibVEX_Translate ( VexTranslateArgs* ); |
| |
| /* A subtlety re interaction between self-checking translations and |
| bb-chasing. The supplied chase_into_ok function should say NO |
| (False) when presented with any address for which you might want to |
| make a self-checking translation. |
| |
| If it doesn't do that, you may end up with Vex chasing from BB #1 |
| to BB #2 (fine); but if you wanted checking for #2 and not #1, that |
| would not be the result. Therefore chase_into_ok should disallow |
| following into #2. That will force the caller to eventually |
| request a new translation starting at #2, at which point Vex will |
| correctly observe the make-a-self-check flag. |
| |
| FIXME: is this still up to date? */ |
| |
| |
| /*-------------------------------------------------------*/ |
| /*--- Patch existing translations ---*/ |
| /*-------------------------------------------------------*/ |
| |
| /* A host address range that was modified by the functions below. |
| Callers must request I-cache syncing after the call as appropriate. */ |
| typedef |
| struct { |
| HWord start; |
| HWord len; /* always > 0 */ |
| } |
| VexInvalRange; |
| |
| /* Chain an XDirect jump located at place_to_chain so it jumps to |
| place_to_jump_to. It is expected (and checked) that this site |
| currently contains a call to the dispatcher specified by |
| disp_cp_chain_me_EXPECTED. */ |
| extern |
| VexInvalRange LibVEX_Chain ( VexArch arch_host, |
| VexEndness endhess_host, |
| void* place_to_chain, |
| const void* disp_cp_chain_me_EXPECTED, |
| const void* place_to_jump_to ); |
| |
| /* Undo an XDirect jump located at place_to_unchain, so it is |
| converted back into a call to disp_cp_chain_me. It is expected |
| (and checked) that this site currently contains a jump directly to |
| the address specified by place_to_jump_to_EXPECTED. */ |
| extern |
| VexInvalRange LibVEX_UnChain ( VexArch arch_host, |
| VexEndness endness_host, |
| void* place_to_unchain, |
| const void* place_to_jump_to_EXPECTED, |
| const void* disp_cp_chain_me ); |
| |
| /* Returns a constant -- the size of the event check that is put at |
| the start of every translation. This makes it possible to |
| calculate the fast entry point address if the slow entry point |
| address is known (the usual case), or vice versa. */ |
| extern |
| Int LibVEX_evCheckSzB ( VexArch arch_host, |
| VexEndness endness_host ); |
| |
| |
| /* Patch the counter location into an existing ProfInc point. The |
| specified point is checked to make sure it is plausible. */ |
| extern |
| VexInvalRange LibVEX_PatchProfInc ( VexArch arch_host, |
| VexEndness endness_host, |
| void* place_to_patch, |
| const ULong* location_of_counter ); |
| |
| |
| /*-------------------------------------------------------*/ |
| /*--- Show accumulated statistics ---*/ |
| /*-------------------------------------------------------*/ |
| |
| extern void LibVEX_ShowStats ( void ); |
| |
| /*-------------------------------------------------------*/ |
| /*-- IR injection --*/ |
| /*-------------------------------------------------------*/ |
| |
| /* IR Injection Control Block */ |
| |
| #define NO_ROUNDING_MODE (~0u) |
| |
| typedef |
| struct { |
| IROp op; // the operation to perform |
| HWord result; // address of the result |
| HWord opnd1; // address of 1st operand |
| HWord opnd2; // address of 2nd operand |
| HWord opnd3; // address of 3rd operand |
| HWord opnd4; // address of 4th operand |
| IRType t_result; // type of result |
| IRType t_opnd1; // type of 1st operand |
| IRType t_opnd2; // type of 2nd operand |
| IRType t_opnd3; // type of 3rd operand |
| IRType t_opnd4; // type of 4th operand |
| UInt rounding_mode; |
| UInt num_operands; // excluding rounding mode, if any |
| Bool shift_amount_is_immediate; |
| } |
| IRICB; |
| |
| extern void LibVEX_InitIRI ( const IRICB * ); |
| |
| /*-------------------------------------------------------*/ |
| /*--- Notes ---*/ |
| /*-------------------------------------------------------*/ |
| |
| /* Code generation conventions that need to be recorded somewhere. |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| x86 |
| ~~~ |
| Generated code should be entered using a JMP instruction. On |
| entry, %ebp should point to the guest state, and %esp should be a |
| valid stack pointer. The generated code may change %eax, %ebx, |
| %ecx, %edx, %esi, %edi, all the FP registers and control state, and |
| all the XMM registers. |
| |
| On entry, the FPU control word should be set to 0x027F, and the SSE |
| control word (%mxcsr) should be set to 0x1F80. On exit, they |
| should still have those values (after masking off the lowest 6 bits |
| of %mxcsr). If they don't, there is a bug in VEX-generated code. |
| |
| Generated code returns to the scheduler using a JMP instruction, to |
| the address specified in the .dispatch field of VexTranslateArgs. |
| %eax (or %eax:%edx, if simulating a 64-bit target) will contain the |
| guest address of the next block to execute. %ebp may be changed |
| to a VEX_TRC_ value, otherwise it should be as it was at entry. |
| |
| CRITICAL ISSUES in x86 code generation. The only known critical |
| issue is that the host FPU and SSE state is not properly saved |
| across calls to helper functions. If any helper references any |
| such state, it is likely (1) to misbehave itself, since the FP |
| stack tags will not be as expected, and (2) after returning to |
| generated code, the generated code is likely to go wrong. This |
| really should be fixed. |
| |
| amd64 |
| ~~~~~ |
| Analogous to x86. |
| |
| ppc32 |
| ~~~~~ |
| On entry, guest state pointer is r31. .dispatch must be NULL. |
| Control is returned with a branch to the link register. Generated |
| code will not change lr. At return, r3 holds the next guest addr |
| (or r3:r4 ?). r31 may be may be changed to a VEX_TRC_ value, |
| otherwise it should be as it was at entry. |
| |
| ppc64 |
| ~~~~~ |
| Same as ppc32. |
| |
| arm32 |
| ~~~~~ |
| r8 is GSP. |
| |
| arm64 |
| ~~~~~ |
| r21 is GSP. |
| |
| ALL GUEST ARCHITECTURES |
| ~~~~~~~~~~~~~~~~~~~~~~~ |
| The guest state must contain two pseudo-registers, guest_CMSTART |
| and guest_CMLEN. These are used to specify guest address ranges, |
| either of code to be invalidated, when used in conjunction with |
| Ijk_InvalICache, or of d-cache ranges to be flushed, when used in |
| conjunction with Ijk_FlushDCache. In such cases, the two _CM |
| pseudo-regs should be filled in by the IR, and then an exit with |
| one of the two abovementioned Ijk_ kinds should happen, so that the |
| dispatcher can action them. Both pseudo-regs must have size equal |
| to the guest word size. |
| |
| The architecture must a third pseudo-register, guest_NRADDR, also |
| guest-word-sized. This is used to record the unredirected guest |
| address at the start of a translation whose start has been |
| redirected. By reading this pseudo-register shortly afterwards, |
| the translation can find out what the corresponding no-redirection |
| address was. Note, this is only set for wrap-style redirects, not |
| for replace-style ones. |
| */ |
| #endif /* ndef __LIBVEX_H */ |
| |
| /*---------------------------------------------------------------*/ |
| /*--- libvex.h ---*/ |
| /*---------------------------------------------------------------*/ |
