blob: 183f642753494d1b9afc96305c77edb99e8a3a7c [file] [log] [blame]
/*
* (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdtdec.h>
#include <fpga.h>
#include <mmc.h>
#include <zynqpl.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
static xilinx_desc fpga;
/* It can be done differently */
static xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10);
static xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15);
static xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20);
static xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30);
static xilinx_desc fpga035 = XILINX_XC7Z035_DESC(0x35);
static xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45);
static xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100);
#endif
int board_init(void)
{
#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
u32 idcode;
idcode = zynq_slcr_get_idcode();
switch (idcode) {
case XILINX_ZYNQ_7010:
fpga = fpga010;
break;
case XILINX_ZYNQ_7015:
fpga = fpga015;
break;
case XILINX_ZYNQ_7020:
fpga = fpga020;
break;
case XILINX_ZYNQ_7030:
fpga = fpga030;
break;
case XILINX_ZYNQ_7035:
fpga = fpga035;
break;
case XILINX_ZYNQ_7045:
fpga = fpga045;
break;
case XILINX_ZYNQ_7100:
fpga = fpga100;
break;
}
#endif
#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
fpga_init();
fpga_add(fpga_xilinx, &fpga);
#endif
return 0;
}
int board_late_init(void)
{
switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
case ZYNQ_BM_NOR:
setenv("modeboot", "norboot");
break;
case ZYNQ_BM_SD:
setenv("modeboot", "sdboot");
break;
case ZYNQ_BM_JTAG:
setenv("modeboot", "jtagboot");
break;
default:
setenv("modeboot", "");
break;
}
return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
puts("Board: Xilinx Zynq\n");
return 0;
}
#endif
int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
{
#if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET)
if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR,
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET,
ethaddr, 6))
printf("I2C EEPROM MAC address read failed\n");
#endif
return 0;
}
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
/*
* fdt_get_reg - Fill buffer by information from DT
*/
static phys_size_t fdt_get_reg(const void *fdt, int nodeoffset, void *buf,
const u32 *cell, int n)
{
int i = 0, b, banks;
int parent_offset = fdt_parent_offset(fdt, nodeoffset);
int address_cells = fdt_address_cells(fdt, parent_offset);
int size_cells = fdt_size_cells(fdt, parent_offset);
char *p = buf;
u64 val;
u64 vals;
debug("%s: addr_cells=%x, size_cell=%x, buf=%p, cell=%p\n",
__func__, address_cells, size_cells, buf, cell);
/* Check memory bank setup */
banks = n % (address_cells + size_cells);
if (banks)
panic("Incorrect memory setup cells=%d, ac=%d, sc=%d\n",
n, address_cells, size_cells);
banks = n / (address_cells + size_cells);
for (b = 0; b < banks; b++) {
debug("%s: Bank #%d:\n", __func__, b);
if (address_cells == 2) {
val = cell[i + 1];
val <<= 32;
val |= cell[i];
val = fdt64_to_cpu(val);
debug("%s: addr64=%llx, ptr=%p, cell=%p\n",
__func__, val, p, &cell[i]);
*(phys_addr_t *)p = val;
} else {
debug("%s: addr32=%x, ptr=%p\n",
__func__, fdt32_to_cpu(cell[i]), p);
*(phys_addr_t *)p = fdt32_to_cpu(cell[i]);
}
p += sizeof(phys_addr_t);
i += address_cells;
debug("%s: pa=%p, i=%x, size=%zu\n", __func__, p, i,
sizeof(phys_addr_t));
if (size_cells == 2) {
vals = cell[i + 1];
vals <<= 32;
vals |= cell[i];
vals = fdt64_to_cpu(vals);
debug("%s: size64=%llx, ptr=%p, cell=%p\n",
__func__, vals, p, &cell[i]);
*(phys_size_t *)p = vals;
} else {
debug("%s: size32=%x, ptr=%p\n",
__func__, fdt32_to_cpu(cell[i]), p);
*(phys_size_t *)p = fdt32_to_cpu(cell[i]);
}
p += sizeof(phys_size_t);
i += size_cells;
debug("%s: ps=%p, i=%x, size=%zu\n",
__func__, p, i, sizeof(phys_size_t));
}
/* Return the first address size */
return *(phys_size_t *)((char *)buf + sizeof(phys_addr_t));
}
#define FDT_REG_SIZE sizeof(u32)
/* Temp location for sharing data for storing */
/* Up to 64-bit address + 64-bit size */
static u8 tmp[CONFIG_NR_DRAM_BANKS * 16];
void dram_init_banksize(void)
{
int bank;
memcpy(&gd->bd->bi_dram[0], &tmp, sizeof(tmp));
for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
debug("Bank #%d: start %llx\n", bank,
(unsigned long long)gd->bd->bi_dram[bank].start);
debug("Bank #%d: size %llx\n", bank,
(unsigned long long)gd->bd->bi_dram[bank].size);
}
}
int dram_init(void)
{
int node, len;
const void *blob = gd->fdt_blob;
const u32 *cell;
memset(&tmp, 0, sizeof(tmp));
/* find or create "/memory" node. */
node = fdt_subnode_offset(blob, 0, "memory");
if (node < 0) {
printf("%s: Can't get memory node\n", __func__);
return node;
}
/* Get pointer to cells and lenght of it */
cell = fdt_getprop(blob, node, "reg", &len);
if (!cell) {
printf("%s: Can't get reg property\n", __func__);
return -1;
}
gd->ram_size = fdt_get_reg(blob, node, &tmp, cell, len / FDT_REG_SIZE);
debug("%s: Initial DRAM size %llx\n", __func__, (u64)gd->ram_size);
zynq_ddrc_init();
return 0;
}
#else
int dram_init(void)
{
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
zynq_ddrc_init();
return 0;
}
#endif