blob: 2aa3b9f97149a5ae36a4f4381ef027d70d6e8361 [file] [log] [blame]
/*
* Google Veyron Jerry Rev 3+ board device tree source
*
* Copyright 2014 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0
*/
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
#include "cros-ec-sbs.dtsi"
/ {
model = "Google Jerry";
compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
"google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
chosen {
stdout-path = &uart2;
};
panel_regulator: panel-regualtor {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
vin-supply = <&vcc33_sys>;
};
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc18_wl>;
};
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
vin-supply = <&vcc33_sys>;
startup-delay-us = <15000>;
};
};
&gpio_keys {
power {
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
};
};
&backlight {
power-supply = <&backlight_regulator>;
};
&panel {
power-supply= <&panel_regulator>;
};
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>;
regulators {
mic_vcc: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "mic_vcc";
regulator-suspend-mem-disabled;
};
};
};
&sdmmc {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
&sdmmc_bus4>;
disable-wp;
};
&vcc_5v {
enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
&vopb {
/* Disable this so that we use vopl */
status = "disabled";
};
&edp {
pinctrl-names = "default";
pinctrl-0 = <&edp_hpd>;
};
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
edp {
edp_hpd: edp_hpd {
rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
};
};
emmc {
/* Make sure eMMC is not in reset */
emmc_deassert_reset: emmc-deassert-reset {
rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
lcd {
lcd_enable_h: lcd-en {
rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
};
avdd_1v8_disp_en: avdd-1v8-disp-en {
rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dvs_1: dvs-1 {
rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&i2c4 {
status = "okay";
/*
* Trackpad pin control is shared between Elan and Synaptics devices
* so we have to pull it up to the bus level.
*/
pinctrl-names = "default";
pinctrl-0 = <&i2c4_xfer &trackpad_int>;
trackpad@15 {
compatible = "elan,i2c_touchpad";
interrupt-parent = <&gpio7>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
/*
* Remove the inherited pinctrl settings to avoid clashing
* with bus-wide ones.
*/
/delete-property/pinctrl-names;
/delete-property/pinctrl-0;
reg = <0x15>;
vcc-supply = <&vcc33_io>;
wakeup-source;
};
trackpad@2c {
compatible = "hid-over-i2c";
interrupt-parent = <&gpio7>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
reg = <0x2c>;
hid-descr-addr = <0x0020>;
vcc-supply = <&vcc33_io>;
wakeup-source;
};
};