blob: 0929d51f325b6a78d353fdb135baec4e2d691b43 [file] [log] [blame]
/* rtcwake.c - enter sleep state until given time.
*
* Copyright 2020 The Android Open Source Project
USE_RTCWAKE(NEWTOY(rtcwake, "(list-modes);(auto)a(device)d:(local)l(mode)m:(seconds)s#(time)t#(utc)u(verbose)v[!alu]", TOYFLAG_USR|TOYFLAG_BIN))
config RTCWAKE
bool "rtcwake"
default n
help
usage: rtcwake [-aluv] [-d FILE] [-m MODE] [-s SECS] [-t UNIX]
Enter the given sleep state until the given time.
-a RTC uses time specified in /etc/adjtime
-d FILE Device to use (default /dev/rtc)
-l RTC uses local time
-m Mode (--list-modes to see those supported by your kernel):
disable Cancel current alarm
freeze Freeze processes, idle processors
disk S4: suspend to disk
mem S3: suspend to RAM
no Don't suspend, just set wakeup time
off S5: power off
on Don't suspend, poll RTC for alarm
show Don't suspend, just show current alarm
standby S1: default
-s SECS Wake SECS seconds from now
-t UNIX Wake UNIX seconds from epoch
-u RTC uses UTC
-v Verbose
*/
#define FOR_rtcwake
#include "toys.h"
GLOBALS(
long long t, s;
char *m, *d;
struct rtc_wkalrm alarm;
)
void rtcwake_main(void)
{
time_t now, rtc_now, then;
struct tm rtc_tm;
int fd, utc;
if (FLAG(list_modes)) {
xreadfile("/sys/power/state", toybuf, sizeof(toybuf));
printf("off no on disable show %s", toybuf);
return;
}
// util-linux defaults to "suspend", even though I don't have anything that
// supports that (testing everything from a ~2010 laptop to a 2019 desktop).
if (!TT.m) TT.m = "suspend";
if (FLAG(u)) utc = 1;
else if (FLAG(l)) utc = 0;
else {
xreadfile("/etc/adjtime", toybuf, sizeof(toybuf));
utc = !!strstr(toybuf, "UTC");
}
if (FLAG(v)) xprintf("RTC time: %s\n", utc ? "UTC" : "local");
if (!TT.d) TT.d = "/dev/rtc0";
if (FLAG(v)) xprintf("Device: %s\n", TT.d);
fd = xopen(TT.d, O_RDWR);
now = time(0);
xioctl(fd, RTC_RD_TIME, &rtc_tm);
rtc_now = xmktime(&rtc_tm, utc);
if (FLAG(v)) {
xprintf("System time:\t%lld / %s", (long long)now, ctime(&now));
xprintf("RTC time:\t%lld / %s", (long long)rtc_now, ctime(&rtc_now));
}
if (!strcmp(TT.m, "show")) { // Don't suspend, just show current alarm.
xioctl(fd, RTC_WKALM_RD, &TT.alarm);
if (!TT.alarm.enabled) xputs("alarm: off");
else {
if ((then = mktime((void *)&TT.alarm.time)) < 0) perror_exit("mktime");
xprintf("alarm: on %s", ctime(&then));
}
goto done;
} else if (!strcmp(TT.m, "disable")) { // Cancel current alarm.
xioctl(fd, RTC_WKALM_RD, &TT.alarm);
TT.alarm.enabled = 0;
xioctl(fd, RTC_WKALM_SET, &TT.alarm);
goto done;
}
if (FLAG(s)) {
then = rtc_now + TT.s + 1; // strace shows util-linux adds 1.
} else if (FLAG(t)) {
then = TT.t + (rtc_now - now);
if (then<=rtc_now) error_exit("rtc %lld >= %lld", (long long)rtc_now, TT.t);
} else help_exit("-m %s needs -s or -t", TT.m);
if (FLAG(v)) xprintf("Wake time:\t%lld / %s", (long long)then, ctime(&then));
if (!(utc ? gmtime_r : localtime_r)(&then, (void *)&TT.alarm.time))
error_exit(utc ? "gmtime_r failed" : "localtime_r failed");
TT.alarm.enabled = 1;
xioctl(fd, RTC_WKALM_SET, &TT.alarm);
sync();
xprintf("wakeup using \"%s\" from %s at %s", TT.m, TT.d, ctime(&then));
msleep(10);
if (!strcmp(TT.m, "no")) { // Don't suspend, just set wakeup time.
} else if (!strcmp(TT.m, "on")) { // Don't suspend, poll RTC for alarm.
unsigned long data = 0;
if (FLAG(v)) xputs("Reading RTC...");
while (!(data & RTC_AF)) {
if (read(fd, &data, sizeof(data)) != sizeof(data)) perror_exit("read");
if (FLAG(v)) xprintf("... %s: %lx\n", TT.d, data);
}
} else if (!strcmp(TT.m, "off")) {
xexec((char *[]){"poweroff", 0});
} else {
// Everything else lands here for one final step. The write will fail with
// EINVAL if the mode is not supported.
int fd = xopen("/sys/power/state", O_WRONLY);
xwrite(fd, TT.m, strlen(TT.m));
close(fd);
}
done:
close(fd);
}