blob: 38ab4605de32aad0683a2e2bcaf933e8b5b8a848 [file] [log] [blame]
**** = High Priority
*** = Implement if possible.
** = Will implement if time.
* = Implement if bored (or deemed necessary).
defer = Implement in next version
**** Add support for nested classes. The type system should be
defer ready to go. The primary obstacle lies in the target language
modules (which were never programmed with nested classes in
mind). There are also issues with nested C structures. For
struct Foo {
struct {
int x,y;
} z;
This is one of the last remaining "hard" problems in the SWIG
core, but it is important that we solve it.
*** "Nested" typemaps. The basic idea is similar to allowing one to
use $descriptor(T) for any T, rather than just $descriptor
for the type currently being typemapped.
In short (ha!), given a previously defined typemap:
%typemap(in) Foo {
// whatever it takes to initialize $1 from $input
it would be possible to inline its code inside another typemap.
While the syntax is still to be defined, the use would be
along the lines of:
template <class T> class vector {
%typemap(in) vector<T> {
for (int i=0; i<N; i++) {
PyObject* x = ... // i-th element
$typemap(in, T, x, $1[i]);
i.e., when $typemap(in,Foo,x,y) is encountered, it will
be replaced by the code for %typemap(in) Foo; in the latter,
x will be replaced for $input and y will be replaced for $1.
As in the case above, x and y themselves might need to be
expanded before or after being substituted in the typemap code.
Also, $typemap(what,Foo,x,y,z,...) will be used in case of
multi-arguments typemaps. The same will hold for "out" typemaps
and all the others.
Comment by mkoeppe:
I think we need to be careful to keep the syntax readable.
I would like to get a syntax that is close to that of
typemap definitions. So consider this typemap:
%typemap(in) int { ... }
I would like to refer to this typemap like this:
$typemap(in, input=x) int = foo;
Here $input would be replaced by the given keyword argument
x, and $1 would be replaced by foo.
This syntax would extend easily to multi-typemaps:
%typemap(in) ( int FIRST, double SECOND ) { ... }
-> $typemap(in, input=x)
( int FIRST = foo, double SECOND = bar );
The advantage of this syntax would be that the formal
arguments (int FIRST, double SECOND) are close to the
actual arguments (foo, bar).
Comment by beazley
$typemap(in, input=x) int = foo;
is a little bit hard to parse in terms of variable substitution.
I'm considering something like this:
$typemap(in,1=int foo, input=x)
Note: This is partially implemented in the new Unified Typemap
Library(python,tcl,ruby and perl) via %fragments and the
SWIG_From/SWIG_AsVal methdos.
*** Implement $fail special variable substitution in wrappers. Used
to properly transfer control out of a wrapper function while
reclaiming resources.
Note: Implemented in languages that uses the UTL via the
'SWIG_fail' macro.
*** Rewrite declaration annotation to better unify %rename and related
directives. Add a selector mechanism that allows specific parse tree
nodes to be identified. For example:
%feature("foo", nodetype="class") Foo { ... some code ... };
Consider use of wildcards. Namespace/nested scope support in
%feature is currently weak. It works, but is fragile. Consider
an implementation that is better integrated with symbol table
management. Continue to consolidate SWIG directives to %feature.
Note: Initial implementation in the %rename directive.
*** Add more intelligent information related to object ownership.
SWIG should be able to automatically strip ownership from
objects when they are assigned to pointer variables and structure
members as well as stored in a container (i.e., an array of pointers).
[ Partially finished for Ruby/Perl/Tcl/Python. ]
** Restoration of the documentation system.
[ Partially done for Python. ]
** Restoration of Objective-C support.
** Unification of symbol tables and type system scopes. In a sense
they capture the same information so it is not necessary to have
both. The existence of two symbol management systems is mostly
**** Add more support for the C++ standard library. std::complex and other
core datatypes. Refine support for STL vector. Add more STL objects.
[ Partially finished for Python. ]
**** Continue to expand the set of recognized typemaps.
All language modules
*** Ability to wrap certain classes as Python built-in types.
**** Rewrite runtime pointer type checking to better integrate
shadow classes. Creation of shadow classes should be done
in C instead of Perl. This will fix a number of problems
related to typemaps and reduce the amount of Perl wrapper code.
**** Create tests for existing support for operator overloading
**** The "Resource Management in Proxies" section of the "SWIG and C++"
chapter discusses how proxies' ownership of their associated C++
object can change, and the use of the special disown() and
acquire() methods to change this ownership status. Need to
address this for Ruby as well.
*** Add support for keyword arguments (by collecting them in a hash?).
**** Look at moving to using the UTL.
** When returning wrapped objects via alternate constructors if that
pointer value already exists "out there" as a resource we should
use the same resource, we can't have multiple ref-counted resources
mapping to the same object in case it gets twice destroyed. And check
if ref count destroying is even working, see smart_pointer_rename
* Work out how classes without even inherited constructors should
interact with the php "new <class>" notation.
See: abstract_inherit_wrap.cpptest
** Look at pass by point and passby ref,
Make sometype** to be auto allocated
Make sometype& and sometype* to be autoallocated IF THEY ARE NOT
ALREADY swigtype wrapped.
* Review to see what else is missing!
** Maybe rename slot setters from CLASS-SLOT-set to CLASS-SLOT-set!
to match Scheme convention for naming of mutators.
** Support keyword args.
** Director Support!
** Cleaner handling of multiple values.
Use a typemap keyword argument "numoutputs" of "out" and
"argout" to indicate how many values are returned.
** Make SWIG's types first-class by using a separate smob type for
SWIG type descriptors; enable reflection on types. (Maybe
GOOPS metaclasses?)
** Provide a clean way to construct type predicates.
** In GOOPS mode, maybe make overloaded functions methods.
** Increase the safety of destructor functions. John Lenz suggests:
I think the best way of doing this would be to use %feature to mark
which classes allow for "normal" <swig> smobs to be deleted explicitly.
We separate pointers into two classes, those that can be deleted from
scheme and those that can't. The pointers that can be deleted use the
<collectable-swig> smob and those that can not be deleted use the
<swig> smob. A user can specify which type of each object they want
with %newobject and the CONSUMED typemap.
By default, the exported destructor will only accept <collectable-swig>
smobs, because by definition, collectable-swig smobs are those that can
be deleted from scheme. This allows for the user to implement
protection. In the interface file, the user has complete control over
which objects can and can not be deleted, and can guarantee that
objects that should not be deleted can not be deleted, and that objects
that should eventually be deleted will be garbage collected.
This protection can then be overridden with a %feature directive,
something like
%feature("guile_allow_destroy_all","1") Foo::~Foo;
I don't know what word we want to use, guile_allow_destroy_all is kinda
bad. This feature would then allow for a <swig Foo *> smob to be
deleted by passing it to the destructor. This would allow users to
maintain the protection on other classes, only manually overriding the
protection on the classes that need it.
** Port list-vector.i and pointer-in-out.i from Guile.
** Add shadow class support for the Swindle system.
** I've been working with my camlp4 module and type information
from the compiler. When I'm done, the user will have access
to type inference when writing code, when the inference is
unambiguous. This allows the user to write x = _foo 1.0
instead of x = get_float (_foo (C_float 1.0)). It's not as
easy as it sounds, because O'caml doesn't keep type information
at run time, and doesn't really have a mechanism for doing what
I need. However, it's possible to write a preprocessor that
inserts correct type info at compile time.
That having been said, the program must compile for type info
to be available, so I need to attend to a lot of details; The
program must compile both with and without type augmentation.
**** Extending SWIG (and internals).
*** Perl, Python, Tcl modules.
*** add section for Perl module support for operator overloading