Merge "Rename target.linux[_x86[_64]] to target.linux_glibc[_x86[_64]]" am: 7ecbb7ccdd am: ebd1125140
am: d3bffc7904
Change-Id: Ia91d00ba00761a0390e13b0178edb1d64ae82aa7
diff --git a/README.version b/README.version
index c26473d..58f47fa 100644
--- a/README.version
+++ b/README.version
@@ -1,3 +1,3 @@
-URL: https://sqlite.org/2017/sqlite-amalgamation-3190200.zip
-Version: 3.19.2
+URL: https://sqlite.org/src/tarball/SQLite-605907e7.tar.gz
+Version: 3.19.4 605907e73adb4533
BugComponent: 24950
diff --git a/dist/Android.bp b/dist/Android.bp
index 0fbcc18..2211d1f 100644
--- a/dist/Android.bp
+++ b/dist/Android.bp
@@ -36,6 +36,9 @@
"-DSQLITE_OMIT_LOAD_EXTENSION",
"-DSQLITE_DEFAULT_FILE_PERMISSIONS=0600",
"-DSQLITE_SECURE_DELETE",
+ "-DSQLITE_ENABLE_BATCH_ATOMIC_WRITE",
+ "-Wno-unused-parameter",
+ "-Werror",
],
target: {
diff --git a/dist/Android.patch b/dist/Android.patch
index 45aa6a9..95cde52 100644
--- a/dist/Android.patch
+++ b/dist/Android.patch
@@ -1,6 +1,6 @@
diff -r -u -d orig/shell.c ./shell.c
---- orig/shell.c 2017-07-24 11:46:21.256572726 +0900
-+++ ./shell.c 2017-07-24 11:46:21.336572354 +0900
+--- orig/shell.c 2017-07-21 09:46:53.488326209 +0900
++++ ./shell.c 2017-07-21 09:46:53.620324492 +0900
@@ -52,6 +52,12 @@
#endif
#include <ctype.h>
@@ -38,9 +38,9 @@
}
diff -r -u -d orig/sqlite3.c ./sqlite3.c
---- orig/sqlite3.c 2017-07-24 11:46:21.332572372 +0900
-+++ ./sqlite3.c 2017-09-07 15:23:58.115384654 +0900
-@@ -33542,7 +33542,7 @@
+--- orig/sqlite3.c 2017-08-04 10:42:31.294648222 +0900
++++ ./sqlite3.c 2017-08-10 13:27:29.784569745 +0900
+@@ -33618,7 +33618,7 @@
SimulateIOError( rc=1 );
if( rc!=0 ){
storeLastErrno((unixFile*)id, errno);
@@ -49,7 +49,7 @@
}
*pSize = buf.st_size;
-@@ -33578,7 +33578,7 @@
+@@ -33654,7 +33654,7 @@
struct stat buf; /* Used to hold return values of fstat() */
if( osFstat(pFile->h, &buf) ){
@@ -58,7 +58,7 @@
}
nSize = ((nByte+pFile->szChunk-1) / pFile->szChunk) * pFile->szChunk;
-@@ -34152,7 +34152,7 @@
+@@ -34262,7 +34262,7 @@
** with the same permissions.
*/
if( osFstat(pDbFd->h, &sStat) ){
@@ -67,7 +67,7 @@
goto shm_open_err;
}
-@@ -115928,7 +115928,7 @@
+@@ -116120,7 +116120,7 @@
}
if( pDb->pSchema->file_format>SQLITE_MAX_FILE_FORMAT ){
sqlite3SetString(pzErrMsg, db, "unsupported file format");
@@ -76,7 +76,7 @@
goto initone_error_out;
}
-@@ -149763,13 +149763,25 @@
+@@ -149914,13 +149914,25 @@
** module with sqlite.
*/
if( SQLITE_OK==rc
diff --git a/dist/orig/sqlite3.c b/dist/orig/sqlite3.c
index 657a54e..b036aa1 100644
--- a/dist/orig/sqlite3.c
+++ b/dist/orig/sqlite3.c
@@ -1,6 +1,6 @@
/******************************************************************************
** This file is an amalgamation of many separate C source files from SQLite
-** version 3.19.2. By combining all the individual C code files into this
+** version 3.19.4. By combining all the individual C code files into this
** single large file, the entire code can be compiled as a single translation
** unit. This allows many compilers to do optimizations that would not be
** possible if the files were compiled separately. Performance improvements
@@ -398,9 +398,9 @@
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
-#define SQLITE_VERSION "3.19.2"
-#define SQLITE_VERSION_NUMBER 3019002
-#define SQLITE_SOURCE_ID "2017-05-25 16:50:27 edb4e819b0c058c7d74d27ebd14cc5ceb2bad6a6144a486a970182b7afe3f8b9"
+#define SQLITE_VERSION "3.19.4"
+#define SQLITE_VERSION_NUMBER 3019004
+#define SQLITE_SOURCE_ID "2017-08-18 19:28:12 605907e73adb4533b12d22be8422f17a8dc125b5c37bb391756a11fc3a8c4d10"
/*
** CAPI3REF: Run-Time Library Version Numbers
@@ -771,6 +771,9 @@
#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8))
#define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8))
#define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8))
+#define SQLITE_IOERR_BEGIN_ATOMIC (SQLITE_IOERR | (29<<8))
+#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8))
+#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8))
#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
@@ -857,6 +860,11 @@
** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
** read-only media and cannot be changed even by processes with
** elevated privileges.
+**
+** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying
+** filesystem supports doing multiple write operations atomically when those
+** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and
+** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].
*/
#define SQLITE_IOCAP_ATOMIC 0x00000001
#define SQLITE_IOCAP_ATOMIC512 0x00000002
@@ -872,6 +880,7 @@
#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800
#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000
#define SQLITE_IOCAP_IMMUTABLE 0x00002000
+#define SQLITE_IOCAP_BATCH_ATOMIC 0x00004000
/*
** CAPI3REF: File Locking Levels
@@ -1006,6 +1015,7 @@
** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN]
** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE]
** <li> [SQLITE_IOCAP_IMMUTABLE]
+** <li> [SQLITE_IOCAP_BATCH_ATOMIC]
** </ul>
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
@@ -1289,6 +1299,40 @@
** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for
** this opcode.
+**
+** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]]
+** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then
+** the file descriptor is placed in "batch write mode", which
+** means all subsequent write operations will be deferred and done
+** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems
+** that do not support batch atomic writes will return SQLITE_NOTFOUND.
+** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to
+** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or
+** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make
+** no VFS interface calls on the same [sqlite3_file] file descriptor
+** except for calls to the xWrite method and the xFileControl method
+** with [SQLITE_FCNTL_SIZE_HINT].
+**
+** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
+** This file control returns [SQLITE_OK] if and only if the writes were
+** all performed successfully and have been committed to persistent storage.
+** ^Regardless of whether or not it is successful, this file control takes
+** the file descriptor out of batch write mode so that all subsequent
+** write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+**
+** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
+** ^This file control takes the file descriptor out of batch write mode
+** so that all subsequent write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE 1
@@ -1320,6 +1364,9 @@
#define SQLITE_FCNTL_JOURNAL_POINTER 28
#define SQLITE_FCNTL_WIN32_GET_HANDLE 29
#define SQLITE_FCNTL_PDB 30
+#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE 31
+#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE 32
+#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE 33
/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
@@ -11721,6 +11768,15 @@
#endif
/*
+** The compile-time options SQLITE_MMAP_READWRITE and
+** SQLITE_ENABLE_BATCH_ATOMIC_WRITE are not compatible with one another.
+** You must choose one or the other (or neither) but not both.
+*/
+#if defined(SQLITE_MMAP_READWRITE) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+#error Cannot use both SQLITE_MMAP_READWRITE and SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+#endif
+
+/*
** GCC does not define the offsetof() macro so we'll have to do it
** ourselves.
*/
@@ -17036,7 +17092,8 @@
SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *);
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *);
#endif
@@ -17540,6 +17597,9 @@
#if SQLITE_ENABLE_ATOMIC_WRITE
"ENABLE_ATOMIC_WRITE",
#endif
+#if SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ "ENABLE_BATCH_ATOMIC_WRITE",
+#endif
#if SQLITE_ENABLE_CEROD
"ENABLE_CEROD",
#endif
@@ -29775,6 +29835,7 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
+#include <sys/ioctl.h>
#include <unistd.h>
/* #include <time.h> */
#include <sys/time.h>
@@ -29784,7 +29845,7 @@
#endif
#if SQLITE_ENABLE_LOCKING_STYLE
-# include <sys/ioctl.h>
+/* # include <sys/ioctl.h> */
# include <sys/file.h>
# include <sys/param.h>
#endif /* SQLITE_ENABLE_LOCKING_STYLE */
@@ -29905,10 +29966,8 @@
sqlite3_int64 mmapSizeMax; /* Configured FCNTL_MMAP_SIZE value */
void *pMapRegion; /* Memory mapped region */
#endif
-#ifdef __QNXNTO__
int sectorSize; /* Device sector size */
int deviceCharacteristics; /* Precomputed device characteristics */
-#endif
#if SQLITE_ENABLE_LOCKING_STYLE
int openFlags; /* The flags specified at open() */
#endif
@@ -30211,6 +30270,20 @@
# define lseek lseek64
#endif
+#ifdef __linux__
+/*
+** Linux-specific IOCTL magic numbers used for controlling F2FS
+*/
+#define F2FS_IOCTL_MAGIC 0xf5
+#define F2FS_IOC_START_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 1)
+#define F2FS_IOC_COMMIT_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 2)
+#define F2FS_IOC_START_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 3)
+#define F2FS_IOC_ABORT_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 5)
+#define F2FS_IOC_GET_FEATURES _IOR(F2FS_IOCTL_MAGIC, 12, u32)
+#define F2FS_FEATURE_ATOMIC_WRITE 0x0004
+#endif /* __linux__ */
+
+
/*
** Different Unix systems declare open() in different ways. Same use
** open(const char*,int,mode_t). Others use open(const char*,int,...).
@@ -30383,6 +30456,9 @@
#endif
#define osLstat ((int(*)(const char*,struct stat*))aSyscall[27].pCurrent)
+ { "ioctl", (sqlite3_syscall_ptr)ioctl, 0 },
+#define osIoctl ((int(*)(int,int,...))aSyscall[28].pCurrent)
+
}; /* End of the overrideable system calls */
@@ -33660,6 +33736,21 @@
static int unixFileControl(sqlite3_file *id, int op, void *pArg){
unixFile *pFile = (unixFile*)id;
switch( op ){
+#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ case SQLITE_FCNTL_BEGIN_ATOMIC_WRITE: {
+ int rc = osIoctl(pFile->h, F2FS_IOC_START_ATOMIC_WRITE);
+ return rc ? SQLITE_IOERR_BEGIN_ATOMIC : SQLITE_OK;
+ }
+ case SQLITE_FCNTL_COMMIT_ATOMIC_WRITE: {
+ int rc = osIoctl(pFile->h, F2FS_IOC_COMMIT_ATOMIC_WRITE);
+ return rc ? SQLITE_IOERR_COMMIT_ATOMIC : SQLITE_OK;
+ }
+ case SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE: {
+ int rc = osIoctl(pFile->h, F2FS_IOC_ABORT_VOLATILE_WRITE);
+ return rc ? SQLITE_IOERR_ROLLBACK_ATOMIC : SQLITE_OK;
+ }
+#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */
+
case SQLITE_FCNTL_LOCKSTATE: {
*(int*)pArg = pFile->eFileLock;
return SQLITE_OK;
@@ -33743,30 +33834,41 @@
}
/*
-** Return the sector size in bytes of the underlying block device for
-** the specified file. This is almost always 512 bytes, but may be
-** larger for some devices.
+** If pFd->sectorSize is non-zero when this function is called, it is a
+** no-op. Otherwise, the values of pFd->sectorSize and
+** pFd->deviceCharacteristics are set according to the file-system
+** characteristics.
**
-** SQLite code assumes this function cannot fail. It also assumes that
-** if two files are created in the same file-system directory (i.e.
-** a database and its journal file) that the sector size will be the
-** same for both.
+** There are two versions of this function. One for QNX and one for all
+** other systems.
*/
-#ifndef __QNXNTO__
-static int unixSectorSize(sqlite3_file *NotUsed){
- UNUSED_PARAMETER(NotUsed);
- return SQLITE_DEFAULT_SECTOR_SIZE;
-}
-#endif
+#ifndef __QNXNTO__
+static void setDeviceCharacteristics(unixFile *pFd){
+ assert( pFd->deviceCharacteristics==0 || pFd->sectorSize!=0 );
+ if( pFd->sectorSize==0 ){
+#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ int res;
+ u32 f = 0;
-/*
-** The following version of unixSectorSize() is optimized for QNX.
-*/
-#ifdef __QNXNTO__
+ /* Check for support for F2FS atomic batch writes. */
+ res = osIoctl(pFd->h, F2FS_IOC_GET_FEATURES, &f);
+ if( res==0 && (f & F2FS_FEATURE_ATOMIC_WRITE) ){
+ pFd->deviceCharacteristics = SQLITE_IOCAP_BATCH_ATOMIC;
+ }
+#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */
+
+ /* Set the POWERSAFE_OVERWRITE flag if requested. */
+ if( pFd->ctrlFlags & UNIXFILE_PSOW ){
+ pFd->deviceCharacteristics |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
+ }
+
+ pFd->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
+ }
+}
+#else
#include <sys/dcmd_blk.h>
#include <sys/statvfs.h>
-static int unixSectorSize(sqlite3_file *id){
- unixFile *pFile = (unixFile*)id;
+static void setDeviceCharacteristics(unixFile *pFile){
if( pFile->sectorSize == 0 ){
struct statvfs fsInfo;
@@ -33835,9 +33937,24 @@
pFile->deviceCharacteristics = 0;
pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
}
- return pFile->sectorSize;
}
-#endif /* __QNXNTO__ */
+#endif
+
+/*
+** Return the sector size in bytes of the underlying block device for
+** the specified file. This is almost always 512 bytes, but may be
+** larger for some devices.
+**
+** SQLite code assumes this function cannot fail. It also assumes that
+** if two files are created in the same file-system directory (i.e.
+** a database and its journal file) that the sector size will be the
+** same for both.
+*/
+static int unixSectorSize(sqlite3_file *id){
+ unixFile *pFd = (unixFile*)id;
+ setDeviceCharacteristics(pFd);
+ return pFd->sectorSize;
+}
/*
** Return the device characteristics for the file.
@@ -33853,16 +33970,9 @@
** available to turn it off and URI query parameter available to turn it off.
*/
static int unixDeviceCharacteristics(sqlite3_file *id){
- unixFile *p = (unixFile*)id;
- int rc = 0;
-#ifdef __QNXNTO__
- if( p->sectorSize==0 ) unixSectorSize(id);
- rc = p->deviceCharacteristics;
-#endif
- if( p->ctrlFlags & UNIXFILE_PSOW ){
- rc |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
- }
- return rc;
+ unixFile *pFd = (unixFile*)id;
+ setDeviceCharacteristics(pFd);
+ return pFd->deviceCharacteristics;
}
#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
@@ -37481,7 +37591,7 @@
/* Double-check that the aSyscall[] array has been constructed
** correctly. See ticket [bb3a86e890c8e96ab] */
- assert( ArraySize(aSyscall)==28 );
+ assert( ArraySize(aSyscall)==29 );
/* Register all VFSes defined in the aVfs[] array */
for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){
@@ -47864,6 +47974,7 @@
assert( isOpen(p->jfd)
|| p->journalMode==PAGER_JOURNALMODE_OFF
|| p->journalMode==PAGER_JOURNALMODE_WAL
+ || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
);
assert( pPager->dbOrigSize<=pPager->dbHintSize );
break;
@@ -47875,6 +47986,7 @@
assert( isOpen(p->jfd)
|| p->journalMode==PAGER_JOURNALMODE_OFF
|| p->journalMode==PAGER_JOURNALMODE_WAL
+ || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
);
break;
@@ -48085,34 +48197,45 @@
}
/*
-** This function determines whether or not the atomic-write optimization
-** can be used with this pager. The optimization can be used if:
+** This function determines whether or not the atomic-write or
+** atomic-batch-write optimizations can be used with this pager. The
+** atomic-write optimization can be used if:
**
** (a) the value returned by OsDeviceCharacteristics() indicates that
** a database page may be written atomically, and
** (b) the value returned by OsSectorSize() is less than or equal
** to the page size.
**
-** The optimization is also always enabled for temporary files. It is
-** an error to call this function if pPager is opened on an in-memory
-** database.
+** If it can be used, then the value returned is the size of the journal
+** file when it contains rollback data for exactly one page.
**
-** If the optimization cannot be used, 0 is returned. If it can be used,
-** then the value returned is the size of the journal file when it
-** contains rollback data for exactly one page.
+** The atomic-batch-write optimization can be used if OsDeviceCharacteristics()
+** returns a value with the SQLITE_IOCAP_BATCH_ATOMIC bit set. -1 is
+** returned in this case.
+**
+** If neither optimization can be used, 0 is returned.
*/
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
static int jrnlBufferSize(Pager *pPager){
assert( !MEMDB );
- if( !pPager->tempFile ){
- int dc; /* Device characteristics */
- int nSector; /* Sector size */
- int szPage; /* Page size */
- assert( isOpen(pPager->fd) );
- dc = sqlite3OsDeviceCharacteristics(pPager->fd);
- nSector = pPager->sectorSize;
- szPage = pPager->pageSize;
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ int dc; /* Device characteristics */
+
+ assert( isOpen(pPager->fd) );
+ dc = sqlite3OsDeviceCharacteristics(pPager->fd);
+#endif
+
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ if( dc&SQLITE_IOCAP_BATCH_ATOMIC ){
+ return -1;
+ }
+#endif
+
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+ {
+ int nSector = pPager->sectorSize;
+ int szPage = pPager->pageSize;
assert(SQLITE_IOCAP_ATOMIC512==(512>>8));
assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8));
@@ -48122,11 +48245,11 @@
}
return JOURNAL_HDR_SZ(pPager) + JOURNAL_PG_SZ(pPager);
-}
-#else
-# define jrnlBufferSize(x) 0
#endif
+ return 0;
+}
+
/*
** If SQLITE_CHECK_PAGES is defined then we do some sanity checking
** on the cache using a hash function. This is used for testing
@@ -48929,7 +49052,9 @@
}
releaseAllSavepoints(pPager);
- assert( isOpen(pPager->jfd) || pPager->pInJournal==0 );
+ assert( isOpen(pPager->jfd) || pPager->pInJournal==0
+ || (sqlite3OsDeviceCharacteristics(pPager->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
+ );
if( isOpen(pPager->jfd) ){
assert( !pagerUseWal(pPager) );
@@ -51486,6 +51611,13 @@
rc = pagerWalFrames(pPager, pPg, 0, 0);
}
}else{
+
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ if( pPager->tempFile==0 ){
+ rc = sqlite3JournalCreate(pPager->jfd);
+ if( rc!=SQLITE_OK ) return pager_error(pPager, rc);
+ }
+#endif
/* Sync the journal file if required. */
if( pPg->flags&PGHDR_NEED_SYNC
@@ -53271,6 +53403,21 @@
sqlite3PcacheCleanAll(pPager->pPCache);
}
}else{
+ /* The bBatch boolean is true if the batch-atomic-write commit method
+ ** should be used. No rollback journal is created if batch-atomic-write
+ ** is enabled.
+ */
+ sqlite3_file *fd = pPager->fd;
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ const int bBatch = zMaster==0 /* An SQLITE_IOCAP_BATCH_ATOMIC commit */
+ && (sqlite3OsDeviceCharacteristics(fd) & SQLITE_IOCAP_BATCH_ATOMIC)
+ && !pPager->noSync
+ && sqlite3JournalIsInMemory(pPager->jfd);
+#else
+# define bBatch 0
+#endif
+
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
/* The following block updates the change-counter. Exactly how it
** does this depends on whether or not the atomic-update optimization
** was enabled at compile time, and if this transaction meets the
@@ -53294,33 +53441,40 @@
** in 'direct' mode. In this case the journal file will never be
** created for this transaction.
*/
- #ifdef SQLITE_ENABLE_ATOMIC_WRITE
- PgHdr *pPg;
- assert( isOpen(pPager->jfd)
- || pPager->journalMode==PAGER_JOURNALMODE_OFF
- || pPager->journalMode==PAGER_JOURNALMODE_WAL
- );
- if( !zMaster && isOpen(pPager->jfd)
- && pPager->journalOff==jrnlBufferSize(pPager)
- && pPager->dbSize>=pPager->dbOrigSize
- && (0==(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty)
- ){
- /* Update the db file change counter via the direct-write method. The
- ** following call will modify the in-memory representation of page 1
- ** to include the updated change counter and then write page 1
- ** directly to the database file. Because of the atomic-write
- ** property of the host file-system, this is safe.
- */
- rc = pager_incr_changecounter(pPager, 1);
- }else{
- rc = sqlite3JournalCreate(pPager->jfd);
- if( rc==SQLITE_OK ){
- rc = pager_incr_changecounter(pPager, 0);
+ if( bBatch==0 ){
+ PgHdr *pPg;
+ assert( isOpen(pPager->jfd)
+ || pPager->journalMode==PAGER_JOURNALMODE_OFF
+ || pPager->journalMode==PAGER_JOURNALMODE_WAL
+ );
+ if( !zMaster && isOpen(pPager->jfd)
+ && pPager->journalOff==jrnlBufferSize(pPager)
+ && pPager->dbSize>=pPager->dbOrigSize
+ && (!(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty)
+ ){
+ /* Update the db file change counter via the direct-write method. The
+ ** following call will modify the in-memory representation of page 1
+ ** to include the updated change counter and then write page 1
+ ** directly to the database file. Because of the atomic-write
+ ** property of the host file-system, this is safe.
+ */
+ rc = pager_incr_changecounter(pPager, 1);
+ }else{
+ rc = sqlite3JournalCreate(pPager->jfd);
+ if( rc==SQLITE_OK ){
+ rc = pager_incr_changecounter(pPager, 0);
+ }
}
}
- #else
+#else
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ if( zMaster ){
+ rc = sqlite3JournalCreate(pPager->jfd);
+ if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+ }
+#endif
rc = pager_incr_changecounter(pPager, 0);
- #endif
+#endif
if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
/* Write the master journal name into the journal file. If a master
@@ -53343,8 +53497,24 @@
*/
rc = syncJournal(pPager, 0);
if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
-
+
+ if( bBatch ){
+ /* The pager is now in DBMOD state. But regardless of what happens
+ ** next, attempting to play the journal back into the database would
+ ** be unsafe. Close it now to make sure that does not happen. */
+ sqlite3OsClose(pPager->jfd);
+ rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_BEGIN_ATOMIC_WRITE, 0);
+ if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+ }
rc = pager_write_pagelist(pPager,sqlite3PcacheDirtyList(pPager->pPCache));
+ if( bBatch ){
+ if( rc==SQLITE_OK ){
+ rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_COMMIT_ATOMIC_WRITE, 0);
+ }else{
+ sqlite3OsFileControl(fd, SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE, 0);
+ }
+ }
+
if( rc!=SQLITE_OK ){
assert( rc!=SQLITE_IOERR_BLOCKED );
goto commit_phase_one_exit;
@@ -67208,12 +67378,18 @@
memcpy(newCell, oldCell, 4);
}
rc = clearCell(pPage, oldCell, &info);
- if( info.nSize==szNew && info.nLocal==info.nPayload ){
+ if( info.nSize==szNew && info.nLocal==info.nPayload
+ && (!ISAUTOVACUUM || szNew<pPage->minLocal)
+ ){
/* Overwrite the old cell with the new if they are the same size.
** We could also try to do this if the old cell is smaller, then add
** the leftover space to the free list. But experiments show that
** doing that is no faster then skipping this optimization and just
- ** calling dropCell() and insertCell(). */
+ ** calling dropCell() and insertCell().
+ **
+ ** This optimization cannot be used on an autovacuum database if the
+ ** new entry uses overflow pages, as the insertCell() call below is
+ ** necessary to add the PTRMAP_OVERFLOW1 pointer-map entry. */
assert( rc==SQLITE_OK ); /* clearCell never fails when nLocal==nPayload */
if( oldCell+szNew > pPage->aDataEnd ) return SQLITE_CORRUPT_BKPT;
memcpy(oldCell, newCell, szNew);
@@ -88855,7 +89031,8 @@
int iChunkOffset;
FileChunk *pChunk;
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
if( (iAmt+iOfst)>p->endpoint.iOffset ){
return SQLITE_IOERR_SHORT_READ;
}
@@ -88974,7 +89151,8 @@
** atomic-write optimization. In this case the first 28 bytes of the
** journal file may be written as part of committing the transaction. */
assert( iOfst==p->endpoint.iOffset || iOfst==0 );
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
if( iOfst==0 && p->pFirst ){
assert( p->nChunkSize>iAmt );
memcpy((u8*)p->pFirst->zChunk, zBuf, iAmt);
@@ -89143,17 +89321,31 @@
sqlite3JournalOpen(0, 0, pJfd, 0, -1);
}
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
/*
** If the argument p points to a MemJournal structure that is not an
** in-memory-only journal file (i.e. is one that was opened with a +ve
-** nSpill parameter), and the underlying file has not yet been created,
-** create it now.
+** nSpill parameter or as SQLITE_OPEN_MAIN_JOURNAL), and the underlying
+** file has not yet been created, create it now.
*/
-SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *p){
+SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *pJfd){
int rc = SQLITE_OK;
- if( p->pMethods==&MemJournalMethods && ((MemJournal*)p)->nSpill>0 ){
- rc = memjrnlCreateFile((MemJournal*)p);
+ MemJournal *p = (MemJournal*)pJfd;
+ if( p->pMethod==&MemJournalMethods && (
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+ p->nSpill>0
+#else
+ /* While this appears to not be possible without ATOMIC_WRITE, the
+ ** paths are complex, so it seems prudent to leave the test in as
+ ** a NEVER(), in case our analysis is subtly flawed. */
+ NEVER(p->nSpill>0)
+#endif
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ || (p->flags & SQLITE_OPEN_MAIN_JOURNAL)
+#endif
+ )){
+ rc = memjrnlCreateFile(p);
}
return rc;
}
@@ -101424,15 +101616,6 @@
}else{
pPk = sqlite3PrimaryKeyIndex(pTab);
- /* Bypass the creation of the PRIMARY KEY btree and the sqlite_master
- ** table entry. This is only required if currently generating VDBE
- ** code for a CREATE TABLE (not when parsing one as part of reading
- ** a database schema). */
- if( v ){
- assert( db->init.busy==0 );
- sqlite3VdbeChangeOpcode(v, pPk->tnum, OP_Goto);
- }
-
/*
** Remove all redundant columns from the PRIMARY KEY. For example, change
** "PRIMARY KEY(a,b,a,b,c,b,c,d)" into just "PRIMARY KEY(a,b,c,d)". Later
@@ -101452,6 +101635,15 @@
if( !db->init.imposterTable ) pPk->uniqNotNull = 1;
nPk = pPk->nKeyCol;
+ /* Bypass the creation of the PRIMARY KEY btree and the sqlite_master
+ ** table entry. This is only required if currently generating VDBE
+ ** code for a CREATE TABLE (not when parsing one as part of reading
+ ** a database schema). */
+ if( v && pPk->tnum>0 ){
+ assert( db->init.busy==0 );
+ sqlite3VdbeChangeOpcode(v, pPk->tnum, OP_Goto);
+ }
+
/* The root page of the PRIMARY KEY is the table root page */
pPk->tnum = pTab->tnum;
@@ -117953,13 +118145,10 @@
** of the SELECT statement. Return the declaration type and origin
** data for the result-set column of the sub-select.
*/
- if( iCol>=0 && ALWAYS(iCol<pS->pEList->nExpr) ){
+ if( iCol>=0 && iCol<pS->pEList->nExpr ){
/* If iCol is less than zero, then the expression requests the
** rowid of the sub-select or view. This expression is legal (see
** test case misc2.2.2) - it always evaluates to NULL.
- **
- ** The ALWAYS() is because iCol>=pS->pEList->nExpr will have been
- ** caught already by name resolution.
*/
NameContext sNC;
Expr *p = pS->pEList->a[iCol].pExpr;
@@ -118069,18 +118258,6 @@
#endif /* !defined(SQLITE_OMIT_DECLTYPE) */
}
-/*
-** Return the Table objecct in the SrcList that has cursor iCursor.
-** Or return NULL if no such Table object exists in the SrcList.
-*/
-static Table *tableWithCursor(SrcList *pList, int iCursor){
- int j;
- for(j=0; j<pList->nSrc; j++){
- if( pList->a[j].iCursor==iCursor ) return pList->a[j].pTab;
- }
- return 0;
-}
-
/*
** Generate code that will tell the VDBE the names of columns
@@ -118089,14 +118266,16 @@
*/
static void generateColumnNames(
Parse *pParse, /* Parser context */
- SrcList *pTabList, /* List of tables */
- ExprList *pEList /* Expressions defining the result set */
+ Select *pSelect /* Generate column names for this SELECT statement */
){
Vdbe *v = pParse->pVdbe;
int i;
Table *pTab;
+ SrcList *pTabList;
+ ExprList *pEList;
sqlite3 *db = pParse->db;
- int fullNames, shortNames;
+ int fullName; /* TABLE.COLUMN if no AS clause and is a direct table ref */
+ int srcName; /* COLUMN or TABLE.COLUMN if no AS clause and is direct */
#ifndef SQLITE_OMIT_EXPLAIN
/* If this is an EXPLAIN, skip this step */
@@ -118106,24 +118285,29 @@
#endif
if( pParse->colNamesSet || db->mallocFailed ) return;
+ /* Column names are determined by the left-most term of a compound select */
+ while( pSelect->pPrior ) pSelect = pSelect->pPrior;
+ pTabList = pSelect->pSrc;
+ pEList = pSelect->pEList;
assert( v!=0 );
assert( pTabList!=0 );
pParse->colNamesSet = 1;
- fullNames = (db->flags & SQLITE_FullColNames)!=0;
- shortNames = (db->flags & SQLITE_ShortColNames)!=0;
+ fullName = (db->flags & SQLITE_FullColNames)!=0;
+ srcName = (db->flags & SQLITE_ShortColNames)!=0 || fullName;
sqlite3VdbeSetNumCols(v, pEList->nExpr);
for(i=0; i<pEList->nExpr; i++){
- Expr *p;
- p = pEList->a[i].pExpr;
- if( NEVER(p==0) ) continue;
+ Expr *p = pEList->a[i].pExpr;
+
+ assert( p!=0 );
if( pEList->a[i].zName ){
+ /* An AS clause always takes first priority */
char *zName = pEList->a[i].zName;
sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_TRANSIENT);
- }else if( (p->op==TK_COLUMN || p->op==TK_AGG_COLUMN)
- && (pTab = tableWithCursor(pTabList, p->iTable))!=0
- ){
+ }else if( srcName && p->op==TK_COLUMN ){
char *zCol;
int iCol = p->iColumn;
+ pTab = p->pTab;
+ assert( pTab!=0 );
if( iCol<0 ) iCol = pTab->iPKey;
assert( iCol==-1 || (iCol>=0 && iCol<pTab->nCol) );
if( iCol<0 ){
@@ -118131,10 +118315,7 @@
}else{
zCol = pTab->aCol[iCol].zName;
}
- if( !shortNames && !fullNames ){
- sqlite3VdbeSetColName(v, i, COLNAME_NAME,
- sqlite3DbStrDup(db, pEList->a[i].zSpan), SQLITE_DYNAMIC);
- }else if( fullNames ){
+ if( fullName ){
char *zName = 0;
zName = sqlite3MPrintf(db, "%s.%s", pTab->zName, zCol);
sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_DYNAMIC);
@@ -118948,11 +119129,6 @@
if( dest.eDest!=priorOp ){
int iCont, iBreak, iStart;
assert( p->pEList );
- if( dest.eDest==SRT_Output ){
- Select *pFirst = p;
- while( pFirst->pPrior ) pFirst = pFirst->pPrior;
- generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList);
- }
iBreak = sqlite3VdbeMakeLabel(v);
iCont = sqlite3VdbeMakeLabel(v);
computeLimitRegisters(pParse, p, iBreak);
@@ -119023,11 +119199,6 @@
** tables.
*/
assert( p->pEList );
- if( dest.eDest==SRT_Output ){
- Select *pFirst = p;
- while( pFirst->pPrior ) pFirst = pFirst->pPrior;
- generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList);
- }
iBreak = sqlite3VdbeMakeLabel(v);
iCont = sqlite3VdbeMakeLabel(v);
computeLimitRegisters(pParse, p, iBreak);
@@ -119635,14 +119806,6 @@
*/
sqlite3VdbeResolveLabel(v, labelEnd);
- /* Set the number of output columns
- */
- if( pDest->eDest==SRT_Output ){
- Select *pFirst = pPrior;
- while( pFirst->pPrior ) pFirst = pFirst->pPrior;
- generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList);
- }
-
/* Reassembly the compound query so that it will be freed correctly
** by the calling function */
if( p->pPrior ){
@@ -119933,7 +120096,6 @@
Select *pSub1; /* Pointer to the rightmost select in sub-query */
SrcList *pSrc; /* The FROM clause of the outer query */
SrcList *pSubSrc; /* The FROM clause of the subquery */
- ExprList *pList; /* The result set of the outer query */
int iParent; /* VDBE cursor number of the pSub result set temp table */
int iNewParent = -1;/* Replacement table for iParent */
int isLeftJoin = 0; /* True if pSub is the right side of a LEFT JOIN */
@@ -120258,14 +120420,6 @@
** We look at every expression in the outer query and every place we see
** "a" we substitute "x*3" and every place we see "b" we substitute "y+10".
*/
- pList = pParent->pEList;
- for(i=0; i<pList->nExpr; i++){
- if( pList->a[i].zName==0 ){
- char *zName = sqlite3DbStrDup(db, pList->a[i].zSpan);
- sqlite3Dequote(zName);
- pList->a[i].zName = zName;
- }
- }
if( pSub->pOrderBy ){
/* At this point, any non-zero iOrderByCol values indicate that the
** ORDER BY column expression is identical to the iOrderByCol'th
@@ -121592,6 +121746,14 @@
}
#endif
+ /* Get a pointer the VDBE under construction, allocating a new VDBE if one
+ ** does not already exist */
+ v = sqlite3GetVdbe(pParse);
+ if( v==0 ) goto select_end;
+ if( pDest->eDest==SRT_Output ){
+ generateColumnNames(pParse, p);
+ }
+
/* Try to flatten subqueries in the FROM clause up into the main query
*/
#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
@@ -121627,11 +121789,6 @@
}
#endif
- /* Get a pointer the VDBE under construction, allocating a new VDBE if one
- ** does not already exist */
- v = sqlite3GetVdbe(pParse);
- if( v==0 ) goto select_end;
-
#ifndef SQLITE_OMIT_COMPOUND_SELECT
/* Handle compound SELECT statements using the separate multiSelect()
** procedure.
@@ -122418,12 +122575,6 @@
select_end:
explainSetInteger(pParse->iSelectId, iRestoreSelectId);
- /* Identify column names if results of the SELECT are to be output.
- */
- if( rc==SQLITE_OK && pDest->eDest==SRT_Output ){
- generateColumnNames(pParse, pTabList, pEList);
- }
-
sqlite3DbFree(db, sAggInfo.aCol);
sqlite3DbFree(db, sAggInfo.aFunc);
#if SELECTTRACE_ENABLED
@@ -164384,6 +164535,7 @@
** value to avoid operating on invalid blobs (which could cause a segfault).
*/
#define RTREE_GEOMETRY_MAGIC 0x891245AB
+#define RTREE_GEOMETRY_SUBTYPE 0x52
/*
** An instance of this structure (in the form of a BLOB) is returned by
@@ -165693,7 +165845,11 @@
int nExpected; /* Expected size of the BLOB */
/* Check that value is actually a blob. */
- if( sqlite3_value_type(pValue)!=SQLITE_BLOB ) return SQLITE_ERROR;
+ if( sqlite3_value_type(pValue)!=SQLITE_BLOB
+ || sqlite3_value_subtype(pValue)!=RTREE_GEOMETRY_SUBTYPE
+ ){
+ return SQLITE_ERROR;
+ }
/* Check that the blob is roughly the right size. */
nBlob = sqlite3_value_bytes(pValue);
@@ -167764,6 +167920,7 @@
rtreeMatchArgFree(pBlob);
}else{
sqlite3_result_blob(ctx, pBlob, nBlob, rtreeMatchArgFree);
+ sqlite3_result_subtype(ctx, RTREE_GEOMETRY_SUBTYPE);
}
}
}
@@ -199056,7 +199213,7 @@
){
assert( nArg==0 );
UNUSED_PARAM2(nArg, apUnused);
- sqlite3_result_text(pCtx, "fts5: 2017-05-25 16:50:27 edb4e819b0c058c7d74d27ebd14cc5ceb2bad6a6144a486a970182b7afe3f8b9", -1, SQLITE_TRANSIENT);
+ sqlite3_result_text(pCtx, "fts5: 2017-08-18 19:28:12 605907e73adb4533b12d22be8422f17a8dc125b5c37bb391756a11fc3a8c4d10", -1, SQLITE_TRANSIENT);
}
static int fts5Init(sqlite3 *db){
diff --git a/dist/orig/sqlite3.h b/dist/orig/sqlite3.h
index 296ada0..977b05b 100644
--- a/dist/orig/sqlite3.h
+++ b/dist/orig/sqlite3.h
@@ -121,9 +121,9 @@
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
-#define SQLITE_VERSION "3.19.2"
-#define SQLITE_VERSION_NUMBER 3019002
-#define SQLITE_SOURCE_ID "2017-05-25 16:50:27 edb4e819b0c058c7d74d27ebd14cc5ceb2bad6a6144a486a970182b7afe3f8b9"
+#define SQLITE_VERSION "3.19.4"
+#define SQLITE_VERSION_NUMBER 3019004
+#define SQLITE_SOURCE_ID "2017-08-18 19:28:12 605907e73adb4533b12d22be8422f17a8dc125b5c37bb391756a11fc3a8c4d10"
/*
** CAPI3REF: Run-Time Library Version Numbers
@@ -494,6 +494,9 @@
#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8))
#define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8))
#define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8))
+#define SQLITE_IOERR_BEGIN_ATOMIC (SQLITE_IOERR | (29<<8))
+#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8))
+#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8))
#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
@@ -580,6 +583,11 @@
** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
** read-only media and cannot be changed even by processes with
** elevated privileges.
+**
+** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying
+** filesystem supports doing multiple write operations atomically when those
+** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and
+** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].
*/
#define SQLITE_IOCAP_ATOMIC 0x00000001
#define SQLITE_IOCAP_ATOMIC512 0x00000002
@@ -595,6 +603,7 @@
#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800
#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000
#define SQLITE_IOCAP_IMMUTABLE 0x00002000
+#define SQLITE_IOCAP_BATCH_ATOMIC 0x00004000
/*
** CAPI3REF: File Locking Levels
@@ -729,6 +738,7 @@
** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN]
** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE]
** <li> [SQLITE_IOCAP_IMMUTABLE]
+** <li> [SQLITE_IOCAP_BATCH_ATOMIC]
** </ul>
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
@@ -1012,6 +1022,40 @@
** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for
** this opcode.
+**
+** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]]
+** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then
+** the file descriptor is placed in "batch write mode", which
+** means all subsequent write operations will be deferred and done
+** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems
+** that do not support batch atomic writes will return SQLITE_NOTFOUND.
+** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to
+** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or
+** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make
+** no VFS interface calls on the same [sqlite3_file] file descriptor
+** except for calls to the xWrite method and the xFileControl method
+** with [SQLITE_FCNTL_SIZE_HINT].
+**
+** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
+** This file control returns [SQLITE_OK] if and only if the writes were
+** all performed successfully and have been committed to persistent storage.
+** ^Regardless of whether or not it is successful, this file control takes
+** the file descriptor out of batch write mode so that all subsequent
+** write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+**
+** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
+** ^This file control takes the file descriptor out of batch write mode
+** so that all subsequent write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE 1
@@ -1043,6 +1087,9 @@
#define SQLITE_FCNTL_JOURNAL_POINTER 28
#define SQLITE_FCNTL_WIN32_GET_HANDLE 29
#define SQLITE_FCNTL_PDB 30
+#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE 31
+#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE 32
+#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE 33
/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
diff --git a/dist/sqlite3.c b/dist/sqlite3.c
index 9db21a8..912acbe 100644
--- a/dist/sqlite3.c
+++ b/dist/sqlite3.c
@@ -1,6 +1,6 @@
/******************************************************************************
** This file is an amalgamation of many separate C source files from SQLite
-** version 3.19.2. By combining all the individual C code files into this
+** version 3.19.4. By combining all the individual C code files into this
** single large file, the entire code can be compiled as a single translation
** unit. This allows many compilers to do optimizations that would not be
** possible if the files were compiled separately. Performance improvements
@@ -398,9 +398,9 @@
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
-#define SQLITE_VERSION "3.19.2"
-#define SQLITE_VERSION_NUMBER 3019002
-#define SQLITE_SOURCE_ID "2017-05-25 16:50:27 edb4e819b0c058c7d74d27ebd14cc5ceb2bad6a6144a486a970182b7afe3f8b9"
+#define SQLITE_VERSION "3.19.4"
+#define SQLITE_VERSION_NUMBER 3019004
+#define SQLITE_SOURCE_ID "2017-08-18 19:28:12 605907e73adb4533b12d22be8422f17a8dc125b5c37bb391756a11fc3a8c4d10"
/*
** CAPI3REF: Run-Time Library Version Numbers
@@ -771,6 +771,9 @@
#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8))
#define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8))
#define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8))
+#define SQLITE_IOERR_BEGIN_ATOMIC (SQLITE_IOERR | (29<<8))
+#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8))
+#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8))
#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
@@ -857,6 +860,11 @@
** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
** read-only media and cannot be changed even by processes with
** elevated privileges.
+**
+** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying
+** filesystem supports doing multiple write operations atomically when those
+** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and
+** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].
*/
#define SQLITE_IOCAP_ATOMIC 0x00000001
#define SQLITE_IOCAP_ATOMIC512 0x00000002
@@ -872,6 +880,7 @@
#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800
#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000
#define SQLITE_IOCAP_IMMUTABLE 0x00002000
+#define SQLITE_IOCAP_BATCH_ATOMIC 0x00004000
/*
** CAPI3REF: File Locking Levels
@@ -1006,6 +1015,7 @@
** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN]
** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE]
** <li> [SQLITE_IOCAP_IMMUTABLE]
+** <li> [SQLITE_IOCAP_BATCH_ATOMIC]
** </ul>
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
@@ -1289,6 +1299,40 @@
** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for
** this opcode.
+**
+** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]]
+** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then
+** the file descriptor is placed in "batch write mode", which
+** means all subsequent write operations will be deferred and done
+** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems
+** that do not support batch atomic writes will return SQLITE_NOTFOUND.
+** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to
+** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or
+** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make
+** no VFS interface calls on the same [sqlite3_file] file descriptor
+** except for calls to the xWrite method and the xFileControl method
+** with [SQLITE_FCNTL_SIZE_HINT].
+**
+** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
+** This file control returns [SQLITE_OK] if and only if the writes were
+** all performed successfully and have been committed to persistent storage.
+** ^Regardless of whether or not it is successful, this file control takes
+** the file descriptor out of batch write mode so that all subsequent
+** write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+**
+** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
+** ^This file control takes the file descriptor out of batch write mode
+** so that all subsequent write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE 1
@@ -1320,6 +1364,9 @@
#define SQLITE_FCNTL_JOURNAL_POINTER 28
#define SQLITE_FCNTL_WIN32_GET_HANDLE 29
#define SQLITE_FCNTL_PDB 30
+#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE 31
+#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE 32
+#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE 33
/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
@@ -11721,6 +11768,15 @@
#endif
/*
+** The compile-time options SQLITE_MMAP_READWRITE and
+** SQLITE_ENABLE_BATCH_ATOMIC_WRITE are not compatible with one another.
+** You must choose one or the other (or neither) but not both.
+*/
+#if defined(SQLITE_MMAP_READWRITE) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+#error Cannot use both SQLITE_MMAP_READWRITE and SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+#endif
+
+/*
** GCC does not define the offsetof() macro so we'll have to do it
** ourselves.
*/
@@ -17036,7 +17092,8 @@
SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *);
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *);
#endif
@@ -17540,6 +17597,9 @@
#if SQLITE_ENABLE_ATOMIC_WRITE
"ENABLE_ATOMIC_WRITE",
#endif
+#if SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ "ENABLE_BATCH_ATOMIC_WRITE",
+#endif
#if SQLITE_ENABLE_CEROD
"ENABLE_CEROD",
#endif
@@ -29775,6 +29835,7 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
+#include <sys/ioctl.h>
#include <unistd.h>
/* #include <time.h> */
#include <sys/time.h>
@@ -29784,7 +29845,7 @@
#endif
#if SQLITE_ENABLE_LOCKING_STYLE
-# include <sys/ioctl.h>
+/* # include <sys/ioctl.h> */
# include <sys/file.h>
# include <sys/param.h>
#endif /* SQLITE_ENABLE_LOCKING_STYLE */
@@ -29905,10 +29966,8 @@
sqlite3_int64 mmapSizeMax; /* Configured FCNTL_MMAP_SIZE value */
void *pMapRegion; /* Memory mapped region */
#endif
-#ifdef __QNXNTO__
int sectorSize; /* Device sector size */
int deviceCharacteristics; /* Precomputed device characteristics */
-#endif
#if SQLITE_ENABLE_LOCKING_STYLE
int openFlags; /* The flags specified at open() */
#endif
@@ -30211,6 +30270,20 @@
# define lseek lseek64
#endif
+#ifdef __linux__
+/*
+** Linux-specific IOCTL magic numbers used for controlling F2FS
+*/
+#define F2FS_IOCTL_MAGIC 0xf5
+#define F2FS_IOC_START_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 1)
+#define F2FS_IOC_COMMIT_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 2)
+#define F2FS_IOC_START_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 3)
+#define F2FS_IOC_ABORT_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 5)
+#define F2FS_IOC_GET_FEATURES _IOR(F2FS_IOCTL_MAGIC, 12, u32)
+#define F2FS_FEATURE_ATOMIC_WRITE 0x0004
+#endif /* __linux__ */
+
+
/*
** Different Unix systems declare open() in different ways. Same use
** open(const char*,int,mode_t). Others use open(const char*,int,...).
@@ -30383,6 +30456,9 @@
#endif
#define osLstat ((int(*)(const char*,struct stat*))aSyscall[27].pCurrent)
+ { "ioctl", (sqlite3_syscall_ptr)ioctl, 0 },
+#define osIoctl ((int(*)(int,int,...))aSyscall[28].pCurrent)
+
}; /* End of the overrideable system calls */
@@ -33660,6 +33736,21 @@
static int unixFileControl(sqlite3_file *id, int op, void *pArg){
unixFile *pFile = (unixFile*)id;
switch( op ){
+#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ case SQLITE_FCNTL_BEGIN_ATOMIC_WRITE: {
+ int rc = osIoctl(pFile->h, F2FS_IOC_START_ATOMIC_WRITE);
+ return rc ? SQLITE_IOERR_BEGIN_ATOMIC : SQLITE_OK;
+ }
+ case SQLITE_FCNTL_COMMIT_ATOMIC_WRITE: {
+ int rc = osIoctl(pFile->h, F2FS_IOC_COMMIT_ATOMIC_WRITE);
+ return rc ? SQLITE_IOERR_COMMIT_ATOMIC : SQLITE_OK;
+ }
+ case SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE: {
+ int rc = osIoctl(pFile->h, F2FS_IOC_ABORT_VOLATILE_WRITE);
+ return rc ? SQLITE_IOERR_ROLLBACK_ATOMIC : SQLITE_OK;
+ }
+#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */
+
case SQLITE_FCNTL_LOCKSTATE: {
*(int*)pArg = pFile->eFileLock;
return SQLITE_OK;
@@ -33743,30 +33834,41 @@
}
/*
-** Return the sector size in bytes of the underlying block device for
-** the specified file. This is almost always 512 bytes, but may be
-** larger for some devices.
+** If pFd->sectorSize is non-zero when this function is called, it is a
+** no-op. Otherwise, the values of pFd->sectorSize and
+** pFd->deviceCharacteristics are set according to the file-system
+** characteristics.
**
-** SQLite code assumes this function cannot fail. It also assumes that
-** if two files are created in the same file-system directory (i.e.
-** a database and its journal file) that the sector size will be the
-** same for both.
+** There are two versions of this function. One for QNX and one for all
+** other systems.
*/
-#ifndef __QNXNTO__
-static int unixSectorSize(sqlite3_file *NotUsed){
- UNUSED_PARAMETER(NotUsed);
- return SQLITE_DEFAULT_SECTOR_SIZE;
-}
-#endif
+#ifndef __QNXNTO__
+static void setDeviceCharacteristics(unixFile *pFd){
+ assert( pFd->deviceCharacteristics==0 || pFd->sectorSize!=0 );
+ if( pFd->sectorSize==0 ){
+#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ int res;
+ u32 f = 0;
-/*
-** The following version of unixSectorSize() is optimized for QNX.
-*/
-#ifdef __QNXNTO__
+ /* Check for support for F2FS atomic batch writes. */
+ res = osIoctl(pFd->h, F2FS_IOC_GET_FEATURES, &f);
+ if( res==0 && (f & F2FS_FEATURE_ATOMIC_WRITE) ){
+ pFd->deviceCharacteristics = SQLITE_IOCAP_BATCH_ATOMIC;
+ }
+#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */
+
+ /* Set the POWERSAFE_OVERWRITE flag if requested. */
+ if( pFd->ctrlFlags & UNIXFILE_PSOW ){
+ pFd->deviceCharacteristics |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
+ }
+
+ pFd->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
+ }
+}
+#else
#include <sys/dcmd_blk.h>
#include <sys/statvfs.h>
-static int unixSectorSize(sqlite3_file *id){
- unixFile *pFile = (unixFile*)id;
+static void setDeviceCharacteristics(unixFile *pFile){
if( pFile->sectorSize == 0 ){
struct statvfs fsInfo;
@@ -33835,9 +33937,24 @@
pFile->deviceCharacteristics = 0;
pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
}
- return pFile->sectorSize;
}
-#endif /* __QNXNTO__ */
+#endif
+
+/*
+** Return the sector size in bytes of the underlying block device for
+** the specified file. This is almost always 512 bytes, but may be
+** larger for some devices.
+**
+** SQLite code assumes this function cannot fail. It also assumes that
+** if two files are created in the same file-system directory (i.e.
+** a database and its journal file) that the sector size will be the
+** same for both.
+*/
+static int unixSectorSize(sqlite3_file *id){
+ unixFile *pFd = (unixFile*)id;
+ setDeviceCharacteristics(pFd);
+ return pFd->sectorSize;
+}
/*
** Return the device characteristics for the file.
@@ -33853,16 +33970,9 @@
** available to turn it off and URI query parameter available to turn it off.
*/
static int unixDeviceCharacteristics(sqlite3_file *id){
- unixFile *p = (unixFile*)id;
- int rc = 0;
-#ifdef __QNXNTO__
- if( p->sectorSize==0 ) unixSectorSize(id);
- rc = p->deviceCharacteristics;
-#endif
- if( p->ctrlFlags & UNIXFILE_PSOW ){
- rc |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
- }
- return rc;
+ unixFile *pFd = (unixFile*)id;
+ setDeviceCharacteristics(pFd);
+ return pFd->deviceCharacteristics;
}
#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
@@ -37481,7 +37591,7 @@
/* Double-check that the aSyscall[] array has been constructed
** correctly. See ticket [bb3a86e890c8e96ab] */
- assert( ArraySize(aSyscall)==28 );
+ assert( ArraySize(aSyscall)==29 );
/* Register all VFSes defined in the aVfs[] array */
for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){
@@ -47864,6 +47974,7 @@
assert( isOpen(p->jfd)
|| p->journalMode==PAGER_JOURNALMODE_OFF
|| p->journalMode==PAGER_JOURNALMODE_WAL
+ || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
);
assert( pPager->dbOrigSize<=pPager->dbHintSize );
break;
@@ -47875,6 +47986,7 @@
assert( isOpen(p->jfd)
|| p->journalMode==PAGER_JOURNALMODE_OFF
|| p->journalMode==PAGER_JOURNALMODE_WAL
+ || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
);
break;
@@ -48085,34 +48197,45 @@
}
/*
-** This function determines whether or not the atomic-write optimization
-** can be used with this pager. The optimization can be used if:
+** This function determines whether or not the atomic-write or
+** atomic-batch-write optimizations can be used with this pager. The
+** atomic-write optimization can be used if:
**
** (a) the value returned by OsDeviceCharacteristics() indicates that
** a database page may be written atomically, and
** (b) the value returned by OsSectorSize() is less than or equal
** to the page size.
**
-** The optimization is also always enabled for temporary files. It is
-** an error to call this function if pPager is opened on an in-memory
-** database.
+** If it can be used, then the value returned is the size of the journal
+** file when it contains rollback data for exactly one page.
**
-** If the optimization cannot be used, 0 is returned. If it can be used,
-** then the value returned is the size of the journal file when it
-** contains rollback data for exactly one page.
+** The atomic-batch-write optimization can be used if OsDeviceCharacteristics()
+** returns a value with the SQLITE_IOCAP_BATCH_ATOMIC bit set. -1 is
+** returned in this case.
+**
+** If neither optimization can be used, 0 is returned.
*/
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
static int jrnlBufferSize(Pager *pPager){
assert( !MEMDB );
- if( !pPager->tempFile ){
- int dc; /* Device characteristics */
- int nSector; /* Sector size */
- int szPage; /* Page size */
- assert( isOpen(pPager->fd) );
- dc = sqlite3OsDeviceCharacteristics(pPager->fd);
- nSector = pPager->sectorSize;
- szPage = pPager->pageSize;
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ int dc; /* Device characteristics */
+
+ assert( isOpen(pPager->fd) );
+ dc = sqlite3OsDeviceCharacteristics(pPager->fd);
+#endif
+
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ if( dc&SQLITE_IOCAP_BATCH_ATOMIC ){
+ return -1;
+ }
+#endif
+
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+ {
+ int nSector = pPager->sectorSize;
+ int szPage = pPager->pageSize;
assert(SQLITE_IOCAP_ATOMIC512==(512>>8));
assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8));
@@ -48122,11 +48245,11 @@
}
return JOURNAL_HDR_SZ(pPager) + JOURNAL_PG_SZ(pPager);
-}
-#else
-# define jrnlBufferSize(x) 0
#endif
+ return 0;
+}
+
/*
** If SQLITE_CHECK_PAGES is defined then we do some sanity checking
** on the cache using a hash function. This is used for testing
@@ -48929,7 +49052,9 @@
}
releaseAllSavepoints(pPager);
- assert( isOpen(pPager->jfd) || pPager->pInJournal==0 );
+ assert( isOpen(pPager->jfd) || pPager->pInJournal==0
+ || (sqlite3OsDeviceCharacteristics(pPager->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
+ );
if( isOpen(pPager->jfd) ){
assert( !pagerUseWal(pPager) );
@@ -51486,6 +51611,13 @@
rc = pagerWalFrames(pPager, pPg, 0, 0);
}
}else{
+
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ if( pPager->tempFile==0 ){
+ rc = sqlite3JournalCreate(pPager->jfd);
+ if( rc!=SQLITE_OK ) return pager_error(pPager, rc);
+ }
+#endif
/* Sync the journal file if required. */
if( pPg->flags&PGHDR_NEED_SYNC
@@ -53271,6 +53403,21 @@
sqlite3PcacheCleanAll(pPager->pPCache);
}
}else{
+ /* The bBatch boolean is true if the batch-atomic-write commit method
+ ** should be used. No rollback journal is created if batch-atomic-write
+ ** is enabled.
+ */
+ sqlite3_file *fd = pPager->fd;
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ const int bBatch = zMaster==0 /* An SQLITE_IOCAP_BATCH_ATOMIC commit */
+ && (sqlite3OsDeviceCharacteristics(fd) & SQLITE_IOCAP_BATCH_ATOMIC)
+ && !pPager->noSync
+ && sqlite3JournalIsInMemory(pPager->jfd);
+#else
+# define bBatch 0
+#endif
+
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
/* The following block updates the change-counter. Exactly how it
** does this depends on whether or not the atomic-update optimization
** was enabled at compile time, and if this transaction meets the
@@ -53294,33 +53441,40 @@
** in 'direct' mode. In this case the journal file will never be
** created for this transaction.
*/
- #ifdef SQLITE_ENABLE_ATOMIC_WRITE
- PgHdr *pPg;
- assert( isOpen(pPager->jfd)
- || pPager->journalMode==PAGER_JOURNALMODE_OFF
- || pPager->journalMode==PAGER_JOURNALMODE_WAL
- );
- if( !zMaster && isOpen(pPager->jfd)
- && pPager->journalOff==jrnlBufferSize(pPager)
- && pPager->dbSize>=pPager->dbOrigSize
- && (0==(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty)
- ){
- /* Update the db file change counter via the direct-write method. The
- ** following call will modify the in-memory representation of page 1
- ** to include the updated change counter and then write page 1
- ** directly to the database file. Because of the atomic-write
- ** property of the host file-system, this is safe.
- */
- rc = pager_incr_changecounter(pPager, 1);
- }else{
- rc = sqlite3JournalCreate(pPager->jfd);
- if( rc==SQLITE_OK ){
- rc = pager_incr_changecounter(pPager, 0);
+ if( bBatch==0 ){
+ PgHdr *pPg;
+ assert( isOpen(pPager->jfd)
+ || pPager->journalMode==PAGER_JOURNALMODE_OFF
+ || pPager->journalMode==PAGER_JOURNALMODE_WAL
+ );
+ if( !zMaster && isOpen(pPager->jfd)
+ && pPager->journalOff==jrnlBufferSize(pPager)
+ && pPager->dbSize>=pPager->dbOrigSize
+ && (!(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty)
+ ){
+ /* Update the db file change counter via the direct-write method. The
+ ** following call will modify the in-memory representation of page 1
+ ** to include the updated change counter and then write page 1
+ ** directly to the database file. Because of the atomic-write
+ ** property of the host file-system, this is safe.
+ */
+ rc = pager_incr_changecounter(pPager, 1);
+ }else{
+ rc = sqlite3JournalCreate(pPager->jfd);
+ if( rc==SQLITE_OK ){
+ rc = pager_incr_changecounter(pPager, 0);
+ }
}
}
- #else
+#else
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ if( zMaster ){
+ rc = sqlite3JournalCreate(pPager->jfd);
+ if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+ }
+#endif
rc = pager_incr_changecounter(pPager, 0);
- #endif
+#endif
if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
/* Write the master journal name into the journal file. If a master
@@ -53343,8 +53497,24 @@
*/
rc = syncJournal(pPager, 0);
if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
-
+
+ if( bBatch ){
+ /* The pager is now in DBMOD state. But regardless of what happens
+ ** next, attempting to play the journal back into the database would
+ ** be unsafe. Close it now to make sure that does not happen. */
+ sqlite3OsClose(pPager->jfd);
+ rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_BEGIN_ATOMIC_WRITE, 0);
+ if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+ }
rc = pager_write_pagelist(pPager,sqlite3PcacheDirtyList(pPager->pPCache));
+ if( bBatch ){
+ if( rc==SQLITE_OK ){
+ rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_COMMIT_ATOMIC_WRITE, 0);
+ }else{
+ sqlite3OsFileControl(fd, SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE, 0);
+ }
+ }
+
if( rc!=SQLITE_OK ){
assert( rc!=SQLITE_IOERR_BLOCKED );
goto commit_phase_one_exit;
@@ -67208,12 +67378,18 @@
memcpy(newCell, oldCell, 4);
}
rc = clearCell(pPage, oldCell, &info);
- if( info.nSize==szNew && info.nLocal==info.nPayload ){
+ if( info.nSize==szNew && info.nLocal==info.nPayload
+ && (!ISAUTOVACUUM || szNew<pPage->minLocal)
+ ){
/* Overwrite the old cell with the new if they are the same size.
** We could also try to do this if the old cell is smaller, then add
** the leftover space to the free list. But experiments show that
** doing that is no faster then skipping this optimization and just
- ** calling dropCell() and insertCell(). */
+ ** calling dropCell() and insertCell().
+ **
+ ** This optimization cannot be used on an autovacuum database if the
+ ** new entry uses overflow pages, as the insertCell() call below is
+ ** necessary to add the PTRMAP_OVERFLOW1 pointer-map entry. */
assert( rc==SQLITE_OK ); /* clearCell never fails when nLocal==nPayload */
if( oldCell+szNew > pPage->aDataEnd ) return SQLITE_CORRUPT_BKPT;
memcpy(oldCell, newCell, szNew);
@@ -88855,7 +89031,8 @@
int iChunkOffset;
FileChunk *pChunk;
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
if( (iAmt+iOfst)>p->endpoint.iOffset ){
return SQLITE_IOERR_SHORT_READ;
}
@@ -88974,7 +89151,8 @@
** atomic-write optimization. In this case the first 28 bytes of the
** journal file may be written as part of committing the transaction. */
assert( iOfst==p->endpoint.iOffset || iOfst==0 );
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
if( iOfst==0 && p->pFirst ){
assert( p->nChunkSize>iAmt );
memcpy((u8*)p->pFirst->zChunk, zBuf, iAmt);
@@ -89143,17 +89321,31 @@
sqlite3JournalOpen(0, 0, pJfd, 0, -1);
}
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
/*
** If the argument p points to a MemJournal structure that is not an
** in-memory-only journal file (i.e. is one that was opened with a +ve
-** nSpill parameter), and the underlying file has not yet been created,
-** create it now.
+** nSpill parameter or as SQLITE_OPEN_MAIN_JOURNAL), and the underlying
+** file has not yet been created, create it now.
*/
-SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *p){
+SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *pJfd){
int rc = SQLITE_OK;
- if( p->pMethods==&MemJournalMethods && ((MemJournal*)p)->nSpill>0 ){
- rc = memjrnlCreateFile((MemJournal*)p);
+ MemJournal *p = (MemJournal*)pJfd;
+ if( p->pMethod==&MemJournalMethods && (
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+ p->nSpill>0
+#else
+ /* While this appears to not be possible without ATOMIC_WRITE, the
+ ** paths are complex, so it seems prudent to leave the test in as
+ ** a NEVER(), in case our analysis is subtly flawed. */
+ NEVER(p->nSpill>0)
+#endif
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ || (p->flags & SQLITE_OPEN_MAIN_JOURNAL)
+#endif
+ )){
+ rc = memjrnlCreateFile(p);
}
return rc;
}
@@ -101424,15 +101616,6 @@
}else{
pPk = sqlite3PrimaryKeyIndex(pTab);
- /* Bypass the creation of the PRIMARY KEY btree and the sqlite_master
- ** table entry. This is only required if currently generating VDBE
- ** code for a CREATE TABLE (not when parsing one as part of reading
- ** a database schema). */
- if( v ){
- assert( db->init.busy==0 );
- sqlite3VdbeChangeOpcode(v, pPk->tnum, OP_Goto);
- }
-
/*
** Remove all redundant columns from the PRIMARY KEY. For example, change
** "PRIMARY KEY(a,b,a,b,c,b,c,d)" into just "PRIMARY KEY(a,b,c,d)". Later
@@ -101452,6 +101635,15 @@
if( !db->init.imposterTable ) pPk->uniqNotNull = 1;
nPk = pPk->nKeyCol;
+ /* Bypass the creation of the PRIMARY KEY btree and the sqlite_master
+ ** table entry. This is only required if currently generating VDBE
+ ** code for a CREATE TABLE (not when parsing one as part of reading
+ ** a database schema). */
+ if( v && pPk->tnum>0 ){
+ assert( db->init.busy==0 );
+ sqlite3VdbeChangeOpcode(v, pPk->tnum, OP_Goto);
+ }
+
/* The root page of the PRIMARY KEY is the table root page */
pPk->tnum = pTab->tnum;
@@ -117953,13 +118145,10 @@
** of the SELECT statement. Return the declaration type and origin
** data for the result-set column of the sub-select.
*/
- if( iCol>=0 && ALWAYS(iCol<pS->pEList->nExpr) ){
+ if( iCol>=0 && iCol<pS->pEList->nExpr ){
/* If iCol is less than zero, then the expression requests the
** rowid of the sub-select or view. This expression is legal (see
** test case misc2.2.2) - it always evaluates to NULL.
- **
- ** The ALWAYS() is because iCol>=pS->pEList->nExpr will have been
- ** caught already by name resolution.
*/
NameContext sNC;
Expr *p = pS->pEList->a[iCol].pExpr;
@@ -118069,18 +118258,6 @@
#endif /* !defined(SQLITE_OMIT_DECLTYPE) */
}
-/*
-** Return the Table objecct in the SrcList that has cursor iCursor.
-** Or return NULL if no such Table object exists in the SrcList.
-*/
-static Table *tableWithCursor(SrcList *pList, int iCursor){
- int j;
- for(j=0; j<pList->nSrc; j++){
- if( pList->a[j].iCursor==iCursor ) return pList->a[j].pTab;
- }
- return 0;
-}
-
/*
** Generate code that will tell the VDBE the names of columns
@@ -118089,14 +118266,16 @@
*/
static void generateColumnNames(
Parse *pParse, /* Parser context */
- SrcList *pTabList, /* List of tables */
- ExprList *pEList /* Expressions defining the result set */
+ Select *pSelect /* Generate column names for this SELECT statement */
){
Vdbe *v = pParse->pVdbe;
int i;
Table *pTab;
+ SrcList *pTabList;
+ ExprList *pEList;
sqlite3 *db = pParse->db;
- int fullNames, shortNames;
+ int fullName; /* TABLE.COLUMN if no AS clause and is a direct table ref */
+ int srcName; /* COLUMN or TABLE.COLUMN if no AS clause and is direct */
#ifndef SQLITE_OMIT_EXPLAIN
/* If this is an EXPLAIN, skip this step */
@@ -118106,24 +118285,29 @@
#endif
if( pParse->colNamesSet || db->mallocFailed ) return;
+ /* Column names are determined by the left-most term of a compound select */
+ while( pSelect->pPrior ) pSelect = pSelect->pPrior;
+ pTabList = pSelect->pSrc;
+ pEList = pSelect->pEList;
assert( v!=0 );
assert( pTabList!=0 );
pParse->colNamesSet = 1;
- fullNames = (db->flags & SQLITE_FullColNames)!=0;
- shortNames = (db->flags & SQLITE_ShortColNames)!=0;
+ fullName = (db->flags & SQLITE_FullColNames)!=0;
+ srcName = (db->flags & SQLITE_ShortColNames)!=0 || fullName;
sqlite3VdbeSetNumCols(v, pEList->nExpr);
for(i=0; i<pEList->nExpr; i++){
- Expr *p;
- p = pEList->a[i].pExpr;
- if( NEVER(p==0) ) continue;
+ Expr *p = pEList->a[i].pExpr;
+
+ assert( p!=0 );
if( pEList->a[i].zName ){
+ /* An AS clause always takes first priority */
char *zName = pEList->a[i].zName;
sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_TRANSIENT);
- }else if( (p->op==TK_COLUMN || p->op==TK_AGG_COLUMN)
- && (pTab = tableWithCursor(pTabList, p->iTable))!=0
- ){
+ }else if( srcName && p->op==TK_COLUMN ){
char *zCol;
int iCol = p->iColumn;
+ pTab = p->pTab;
+ assert( pTab!=0 );
if( iCol<0 ) iCol = pTab->iPKey;
assert( iCol==-1 || (iCol>=0 && iCol<pTab->nCol) );
if( iCol<0 ){
@@ -118131,10 +118315,7 @@
}else{
zCol = pTab->aCol[iCol].zName;
}
- if( !shortNames && !fullNames ){
- sqlite3VdbeSetColName(v, i, COLNAME_NAME,
- sqlite3DbStrDup(db, pEList->a[i].zSpan), SQLITE_DYNAMIC);
- }else if( fullNames ){
+ if( fullName ){
char *zName = 0;
zName = sqlite3MPrintf(db, "%s.%s", pTab->zName, zCol);
sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_DYNAMIC);
@@ -118948,11 +119129,6 @@
if( dest.eDest!=priorOp ){
int iCont, iBreak, iStart;
assert( p->pEList );
- if( dest.eDest==SRT_Output ){
- Select *pFirst = p;
- while( pFirst->pPrior ) pFirst = pFirst->pPrior;
- generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList);
- }
iBreak = sqlite3VdbeMakeLabel(v);
iCont = sqlite3VdbeMakeLabel(v);
computeLimitRegisters(pParse, p, iBreak);
@@ -119023,11 +119199,6 @@
** tables.
*/
assert( p->pEList );
- if( dest.eDest==SRT_Output ){
- Select *pFirst = p;
- while( pFirst->pPrior ) pFirst = pFirst->pPrior;
- generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList);
- }
iBreak = sqlite3VdbeMakeLabel(v);
iCont = sqlite3VdbeMakeLabel(v);
computeLimitRegisters(pParse, p, iBreak);
@@ -119635,14 +119806,6 @@
*/
sqlite3VdbeResolveLabel(v, labelEnd);
- /* Set the number of output columns
- */
- if( pDest->eDest==SRT_Output ){
- Select *pFirst = pPrior;
- while( pFirst->pPrior ) pFirst = pFirst->pPrior;
- generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList);
- }
-
/* Reassembly the compound query so that it will be freed correctly
** by the calling function */
if( p->pPrior ){
@@ -119933,7 +120096,6 @@
Select *pSub1; /* Pointer to the rightmost select in sub-query */
SrcList *pSrc; /* The FROM clause of the outer query */
SrcList *pSubSrc; /* The FROM clause of the subquery */
- ExprList *pList; /* The result set of the outer query */
int iParent; /* VDBE cursor number of the pSub result set temp table */
int iNewParent = -1;/* Replacement table for iParent */
int isLeftJoin = 0; /* True if pSub is the right side of a LEFT JOIN */
@@ -120258,14 +120420,6 @@
** We look at every expression in the outer query and every place we see
** "a" we substitute "x*3" and every place we see "b" we substitute "y+10".
*/
- pList = pParent->pEList;
- for(i=0; i<pList->nExpr; i++){
- if( pList->a[i].zName==0 ){
- char *zName = sqlite3DbStrDup(db, pList->a[i].zSpan);
- sqlite3Dequote(zName);
- pList->a[i].zName = zName;
- }
- }
if( pSub->pOrderBy ){
/* At this point, any non-zero iOrderByCol values indicate that the
** ORDER BY column expression is identical to the iOrderByCol'th
@@ -121592,6 +121746,14 @@
}
#endif
+ /* Get a pointer the VDBE under construction, allocating a new VDBE if one
+ ** does not already exist */
+ v = sqlite3GetVdbe(pParse);
+ if( v==0 ) goto select_end;
+ if( pDest->eDest==SRT_Output ){
+ generateColumnNames(pParse, p);
+ }
+
/* Try to flatten subqueries in the FROM clause up into the main query
*/
#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
@@ -121627,11 +121789,6 @@
}
#endif
- /* Get a pointer the VDBE under construction, allocating a new VDBE if one
- ** does not already exist */
- v = sqlite3GetVdbe(pParse);
- if( v==0 ) goto select_end;
-
#ifndef SQLITE_OMIT_COMPOUND_SELECT
/* Handle compound SELECT statements using the separate multiSelect()
** procedure.
@@ -122418,12 +122575,6 @@
select_end:
explainSetInteger(pParse->iSelectId, iRestoreSelectId);
- /* Identify column names if results of the SELECT are to be output.
- */
- if( rc==SQLITE_OK && pDest->eDest==SRT_Output ){
- generateColumnNames(pParse, pTabList, pEList);
- }
-
sqlite3DbFree(db, sAggInfo.aCol);
sqlite3DbFree(db, sAggInfo.aFunc);
#if SELECTTRACE_ENABLED
@@ -164396,6 +164547,7 @@
** value to avoid operating on invalid blobs (which could cause a segfault).
*/
#define RTREE_GEOMETRY_MAGIC 0x891245AB
+#define RTREE_GEOMETRY_SUBTYPE 0x52
/*
** An instance of this structure (in the form of a BLOB) is returned by
@@ -165705,7 +165857,11 @@
int nExpected; /* Expected size of the BLOB */
/* Check that value is actually a blob. */
- if( sqlite3_value_type(pValue)!=SQLITE_BLOB ) return SQLITE_ERROR;
+ if( sqlite3_value_type(pValue)!=SQLITE_BLOB
+ || sqlite3_value_subtype(pValue)!=RTREE_GEOMETRY_SUBTYPE
+ ){
+ return SQLITE_ERROR;
+ }
/* Check that the blob is roughly the right size. */
nBlob = sqlite3_value_bytes(pValue);
@@ -167776,6 +167932,7 @@
rtreeMatchArgFree(pBlob);
}else{
sqlite3_result_blob(ctx, pBlob, nBlob, rtreeMatchArgFree);
+ sqlite3_result_subtype(ctx, RTREE_GEOMETRY_SUBTYPE);
}
}
}
@@ -199068,7 +199225,7 @@
){
assert( nArg==0 );
UNUSED_PARAM2(nArg, apUnused);
- sqlite3_result_text(pCtx, "fts5: 2017-05-25 16:50:27 edb4e819b0c058c7d74d27ebd14cc5ceb2bad6a6144a486a970182b7afe3f8b9", -1, SQLITE_TRANSIENT);
+ sqlite3_result_text(pCtx, "fts5: 2017-08-18 19:28:12 605907e73adb4533b12d22be8422f17a8dc125b5c37bb391756a11fc3a8c4d10", -1, SQLITE_TRANSIENT);
}
static int fts5Init(sqlite3 *db){
diff --git a/dist/sqlite3.h b/dist/sqlite3.h
index 296ada0..977b05b 100644
--- a/dist/sqlite3.h
+++ b/dist/sqlite3.h
@@ -121,9 +121,9 @@
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
-#define SQLITE_VERSION "3.19.2"
-#define SQLITE_VERSION_NUMBER 3019002
-#define SQLITE_SOURCE_ID "2017-05-25 16:50:27 edb4e819b0c058c7d74d27ebd14cc5ceb2bad6a6144a486a970182b7afe3f8b9"
+#define SQLITE_VERSION "3.19.4"
+#define SQLITE_VERSION_NUMBER 3019004
+#define SQLITE_SOURCE_ID "2017-08-18 19:28:12 605907e73adb4533b12d22be8422f17a8dc125b5c37bb391756a11fc3a8c4d10"
/*
** CAPI3REF: Run-Time Library Version Numbers
@@ -494,6 +494,9 @@
#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8))
#define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8))
#define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8))
+#define SQLITE_IOERR_BEGIN_ATOMIC (SQLITE_IOERR | (29<<8))
+#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8))
+#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8))
#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
@@ -580,6 +583,11 @@
** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
** read-only media and cannot be changed even by processes with
** elevated privileges.
+**
+** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying
+** filesystem supports doing multiple write operations atomically when those
+** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and
+** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].
*/
#define SQLITE_IOCAP_ATOMIC 0x00000001
#define SQLITE_IOCAP_ATOMIC512 0x00000002
@@ -595,6 +603,7 @@
#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800
#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000
#define SQLITE_IOCAP_IMMUTABLE 0x00002000
+#define SQLITE_IOCAP_BATCH_ATOMIC 0x00004000
/*
** CAPI3REF: File Locking Levels
@@ -729,6 +738,7 @@
** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN]
** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE]
** <li> [SQLITE_IOCAP_IMMUTABLE]
+** <li> [SQLITE_IOCAP_BATCH_ATOMIC]
** </ul>
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
@@ -1012,6 +1022,40 @@
** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for
** this opcode.
+**
+** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]]
+** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then
+** the file descriptor is placed in "batch write mode", which
+** means all subsequent write operations will be deferred and done
+** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems
+** that do not support batch atomic writes will return SQLITE_NOTFOUND.
+** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to
+** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or
+** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make
+** no VFS interface calls on the same [sqlite3_file] file descriptor
+** except for calls to the xWrite method and the xFileControl method
+** with [SQLITE_FCNTL_SIZE_HINT].
+**
+** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
+** This file control returns [SQLITE_OK] if and only if the writes were
+** all performed successfully and have been committed to persistent storage.
+** ^Regardless of whether or not it is successful, this file control takes
+** the file descriptor out of batch write mode so that all subsequent
+** write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+**
+** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
+** ^This file control takes the file descriptor out of batch write mode
+** so that all subsequent write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE 1
@@ -1043,6 +1087,9 @@
#define SQLITE_FCNTL_JOURNAL_POINTER 28
#define SQLITE_FCNTL_WIN32_GET_HANDLE 29
#define SQLITE_FCNTL_PDB 30
+#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE 31
+#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE 32
+#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE 33
/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
