| /* |
| * Copyright 2012, Google Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following disclaimer |
| * in the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Google Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| package org.jf.dexlib2; |
| |
| public enum Opcode |
| { |
| NOP((short)0x00, "nop", ReferenceType.NONE, Format.Format10x, Opcode.CAN_CONTINUE), |
| MOVE((short)0x01, "move", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MOVE_FROM16((short)0x02, "move/from16", ReferenceType.NONE, Format.Format22x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MOVE_16((short)0x03, "move/16", ReferenceType.NONE, Format.Format32x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MOVE_WIDE((short)0x04, "move-wide", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| MOVE_WIDE_FROM16((short)0x05, "move-wide/from16", ReferenceType.NONE, Format.Format22x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| MOVE_WIDE_16((short)0x06, "move-wide/16", ReferenceType.NONE, Format.Format32x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| MOVE_OBJECT((short)0x07, "move-object", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MOVE_OBJECT_FROM16((short)0x08, "move-object/from16", ReferenceType.NONE, Format.Format22x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MOVE_OBJECT_16((short)0x09, "move-object/16", ReferenceType.NONE, Format.Format32x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MOVE_RESULT((short)0x0a, "move-result", ReferenceType.NONE, Format.Format11x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MOVE_RESULT_WIDE((short)0x0b, "move-result-wide", ReferenceType.NONE, Format.Format11x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| MOVE_RESULT_OBJECT((short)0x0c, "move-result-object", ReferenceType.NONE, Format.Format11x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MOVE_EXCEPTION((short)0x0d, "move-exception", ReferenceType.NONE, Format.Format11x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| RETURN_VOID((short)0x0e, "return-void", ReferenceType.NONE, Format.Format10x), |
| RETURN((short)0x0f, "return", ReferenceType.NONE, Format.Format11x), |
| RETURN_WIDE((short)0x10, "return-wide", ReferenceType.NONE, Format.Format11x), |
| RETURN_OBJECT((short)0x11, "return-object", ReferenceType.NONE, Format.Format11x), |
| CONST_4((short)0x12, "const/4", ReferenceType.NONE, Format.Format11n, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| CONST_16((short)0x13, "const/16", ReferenceType.NONE, Format.Format21s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| CONST((short)0x14, "const", ReferenceType.NONE, Format.Format31i, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| CONST_HIGH16((short)0x15, "const/high16", ReferenceType.NONE, Format.Format21ih, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| CONST_WIDE_16((short)0x16, "const-wide/16", ReferenceType.NONE, Format.Format21s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| CONST_WIDE_32((short)0x17, "const-wide/32", ReferenceType.NONE, Format.Format31i, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| CONST_WIDE((short)0x18, "const-wide", ReferenceType.NONE, Format.Format51l, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| CONST_WIDE_HIGH16((short)0x19, "const-wide/high16", ReferenceType.NONE, Format.Format21lh, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| CONST_STRING((short)0x1a, "const-string", ReferenceType.STRING, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER, (short)0x1b), |
| CONST_STRING_JUMBO((short)0x1b, "const-string/jumbo", ReferenceType.STRING, Format.Format31c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| CONST_CLASS((short)0x1c, "const-class", ReferenceType.TYPE, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MONITOR_ENTER((short)0x1d, "monitor-enter", ReferenceType.NONE, Format.Format11x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| MONITOR_EXIT((short)0x1e, "monitor-exit", ReferenceType.NONE, Format.Format11x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| CHECK_CAST((short)0x1f, "check-cast", ReferenceType.TYPE, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| INSTANCE_OF((short)0x20, "instance-of", ReferenceType.TYPE, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| ARRAY_LENGTH((short)0x21, "array-length", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| NEW_INSTANCE((short)0x22, "new-instance", ReferenceType.TYPE, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| NEW_ARRAY((short)0x23, "new-array", ReferenceType.TYPE, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| FILLED_NEW_ARRAY((short)0x24, "filled-new-array", ReferenceType.TYPE, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| FILLED_NEW_ARRAY_RANGE((short)0x25, "filled-new-array/range", ReferenceType.TYPE, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| FILL_ARRAY_DATA((short)0x26, "fill-array-data", ReferenceType.NONE, Format.Format31t, Opcode.CAN_CONTINUE), |
| THROW((short)0x27, "throw", ReferenceType.NONE, Format.Format11x, Opcode.CAN_THROW), |
| GOTO((short)0x28, "goto", ReferenceType.NONE, Format.Format10t), |
| GOTO_16((short)0x29, "goto/16", ReferenceType.NONE, Format.Format20t), |
| GOTO_32((short)0x2a, "goto/32", ReferenceType.NONE, Format.Format30t), |
| PACKED_SWITCH((short)0x2b, "packed-switch", ReferenceType.NONE, Format.Format31t, Opcode.CAN_CONTINUE), |
| SPARSE_SWITCH((short)0x2c, "sparse-switch", ReferenceType.NONE, Format.Format31t, Opcode.CAN_CONTINUE), |
| CMPL_FLOAT((short)0x2d, "cmpl-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| CMPG_FLOAT((short)0x2e, "cmpg-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| CMPL_DOUBLE((short)0x2f, "cmpl-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| CMPG_DOUBLE((short)0x30, "cmpg-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| CMP_LONG((short)0x31, "cmp-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IF_EQ((short)0x32, "if-eq", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), |
| IF_NE((short)0x33, "if-ne", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), |
| IF_LT((short)0x34, "if-lt", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), |
| IF_GE((short)0x35, "if-ge", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), |
| IF_GT((short)0x36, "if-gt", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), |
| IF_LE((short)0x37, "if-le", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), |
| IF_EQZ((short)0x38, "if-eqz", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), |
| IF_NEZ((short)0x39, "if-nez", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), |
| IF_LTZ((short)0x3a, "if-ltz", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), |
| IF_GEZ((short)0x3b, "if-gez", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), |
| IF_GTZ((short)0x3c, "if-gtz", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), |
| IF_LEZ((short)0x3d, "if-lez", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), |
| AGET((short)0x44, "aget", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| AGET_WIDE((short)0x45, "aget-wide", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| AGET_OBJECT((short)0x46, "aget-object", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| AGET_BOOLEAN((short)0x47, "aget-boolean", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| AGET_BYTE((short)0x48, "aget-byte", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| AGET_CHAR((short)0x49, "aget-char", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| AGET_SHORT((short)0x4a, "aget-short", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| APUT((short)0x4b, "aput", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| APUT_WIDE((short)0x4c, "aput-wide", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| APUT_OBJECT((short)0x4d, "aput-object", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| APUT_BOOLEAN((short)0x4e, "aput-boolean", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| APUT_BYTE((short)0x4f, "aput-byte", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| APUT_CHAR((short)0x50, "aput-char", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| APUT_SHORT((short)0x51, "aput-short", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IGET((short)0x52, "iget", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IGET_WIDE((short)0x53, "iget-wide", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| IGET_OBJECT((short)0x54, "iget-object", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IGET_BOOLEAN((short)0x55, "iget-boolean", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IGET_BYTE((short)0x56, "iget-byte", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IGET_CHAR((short)0x57, "iget-char", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IGET_SHORT((short)0x58, "iget-short", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IPUT((short)0x59, "iput", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IPUT_WIDE((short)0x5a, "iput-wide", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IPUT_OBJECT((short)0x5b, "iput-object", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IPUT_BOOLEAN((short)0x5c, "iput-boolean", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IPUT_BYTE((short)0x5d, "iput-byte", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IPUT_CHAR((short)0x5e, "iput-char", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IPUT_SHORT((short)0x5f, "iput-short", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SGET((short)0x60, "sget", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SGET_WIDE((short)0x61, "sget-wide", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SGET_OBJECT((short)0x62, "sget-object", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SGET_BOOLEAN((short)0x63, "sget-boolean", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SGET_BYTE((short)0x64, "sget-byte", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SGET_CHAR((short)0x65, "sget-char", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SGET_SHORT((short)0x66, "sget-short", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SPUT((short)0x67, "sput", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SPUT_WIDE((short)0x68, "sput-wide", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SPUT_OBJECT((short)0x69, "sput-object", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SPUT_BOOLEAN((short)0x6a, "sput-boolean", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SPUT_BYTE((short)0x6b, "sput-byte", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SPUT_CHAR((short)0x6c, "sput-char", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SPUT_SHORT((short)0x6d, "sput-short", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| INVOKE_VIRTUAL((short)0x6e, "invoke-virtual", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_SUPER((short)0x6f, "invoke-super", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_DIRECT((short)0x70, "invoke-direct", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT | Opcode.CAN_INITIALIZE_REFERENCE), |
| INVOKE_STATIC((short)0x71, "invoke-static", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_INTERFACE((short)0x72, "invoke-interface", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_VIRTUAL_RANGE((short)0x74, "invoke-virtual/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_SUPER_RANGE((short)0x75, "invoke-super/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_DIRECT_RANGE((short)0x76, "invoke-direct/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT | Opcode.CAN_INITIALIZE_REFERENCE), |
| INVOKE_STATIC_RANGE((short)0x77, "invoke-static/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_INTERFACE_RANGE((short)0x78, "invoke-interface/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| NEG_INT((short)0x7b, "neg-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| NOT_INT((short)0x7c, "not-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| NEG_LONG((short)0x7d, "neg-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| NOT_LONG((short)0x7e, "not-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| NEG_FLOAT((short)0x7f, "neg-float", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| NEG_DOUBLE((short)0x80, "neg-double", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| INT_TO_LONG((short)0x81, "int-to-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| INT_TO_FLOAT((short)0x82, "int-to-float", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| INT_TO_DOUBLE((short)0x83, "int-to-double", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| LONG_TO_INT((short)0x84, "long-to-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| LONG_TO_FLOAT((short)0x85, "long-to-float", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| LONG_TO_DOUBLE((short)0x86, "long-to-double", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| FLOAT_TO_INT((short)0x87, "float-to-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| FLOAT_TO_LONG((short)0x88, "float-to-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| FLOAT_TO_DOUBLE((short)0x89, "float-to-double", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| DOUBLE_TO_INT((short)0x8a, "double-to-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| DOUBLE_TO_LONG((short)0x8b, "double-to-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| DOUBLE_TO_FLOAT((short)0x8c, "double-to-float", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| INT_TO_BYTE((short)0x8d, "int-to-byte", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| INT_TO_CHAR((short)0x8e, "int-to-char", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| INT_TO_SHORT((short)0x8f, "int-to-short", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| ADD_INT((short)0x90, "add-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SUB_INT((short)0x91, "sub-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MUL_INT((short)0x92, "mul-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| DIV_INT((short)0x93, "div-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| REM_INT((short)0x94, "rem-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| AND_INT((short)0x95, "and-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| OR_INT((short)0x96, "or-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| XOR_INT((short)0x97, "xor-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SHL_INT((short)0x98, "shl-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SHR_INT((short)0x99, "shr-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| USHR_INT((short)0x9a, "ushr-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| ADD_LONG((short)0x9b, "add-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SUB_LONG((short)0x9c, "sub-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| MUL_LONG((short)0x9d, "mul-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| DIV_LONG((short)0x9e, "div-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| REM_LONG((short)0x9f, "rem-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| AND_LONG((short)0xa0, "and-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| OR_LONG((short)0xa1, "or-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| XOR_LONG((short)0xa2, "xor-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SHL_LONG((short)0xa3, "shl-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SHR_LONG((short)0xa4, "shr-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| USHR_LONG((short)0xa5, "ushr-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| ADD_FLOAT((short)0xa6, "add-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SUB_FLOAT((short)0xa7, "sub-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MUL_FLOAT((short)0xa8, "mul-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| DIV_FLOAT((short)0xa9, "div-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| REM_FLOAT((short)0xaa, "rem-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| ADD_DOUBLE((short)0xab, "add-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SUB_DOUBLE((short)0xac, "sub-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| MUL_DOUBLE((short)0xad, "mul-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| DIV_DOUBLE((short)0xae, "div-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| REM_DOUBLE((short)0xaf, "rem-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| ADD_INT_2ADDR((short)0xb0, "add-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SUB_INT_2ADDR((short)0xb1, "sub-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MUL_INT_2ADDR((short)0xb2, "mul-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| DIV_INT_2ADDR((short)0xb3, "div-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| REM_INT_2ADDR((short)0xb4, "rem-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| AND_INT_2ADDR((short)0xb5, "and-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| OR_INT_2ADDR((short)0xb6, "or-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| XOR_INT_2ADDR((short)0xb7, "xor-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SHL_INT_2ADDR((short)0xb8, "shl-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SHR_INT_2ADDR((short)0xb9, "shr-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| USHR_INT_2ADDR((short)0xba, "ushr-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| ADD_LONG_2ADDR((short)0xbb, "add-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SUB_LONG_2ADDR((short)0xbc, "sub-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| MUL_LONG_2ADDR((short)0xbd, "mul-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| DIV_LONG_2ADDR((short)0xbe, "div-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| REM_LONG_2ADDR((short)0xbf, "rem-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| AND_LONG_2ADDR((short)0xc0, "and-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| OR_LONG_2ADDR((short)0xc1, "or-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| XOR_LONG_2ADDR((short)0xc2, "xor-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SHL_LONG_2ADDR((short)0xc3, "shl-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SHR_LONG_2ADDR((short)0xc4, "shr-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| USHR_LONG_2ADDR((short)0xc5, "ushr-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| ADD_FLOAT_2ADDR((short)0xc6, "add-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SUB_FLOAT_2ADDR((short)0xc7, "sub-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MUL_FLOAT_2ADDR((short)0xc8, "mul-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| DIV_FLOAT_2ADDR((short)0xc9, "div-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| REM_FLOAT_2ADDR((short)0xca, "rem-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| ADD_DOUBLE_2ADDR((short)0xcb, "add-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SUB_DOUBLE_2ADDR((short)0xcc, "sub-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| MUL_DOUBLE_2ADDR((short)0xcd, "mul-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| DIV_DOUBLE_2ADDR((short)0xce, "div-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| REM_DOUBLE_2ADDR((short)0xcf, "rem-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| ADD_INT_LIT16((short)0xd0, "add-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| RSUB_INT((short)0xd1, "rsub-int", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MUL_INT_LIT16((short)0xd2, "mul-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| DIV_INT_LIT16((short)0xd3, "div-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| REM_INT_LIT16((short)0xd4, "rem-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| AND_INT_LIT16((short)0xd5, "and-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| OR_INT_LIT16((short)0xd6, "or-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| XOR_INT_LIT16((short)0xd7, "xor-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| ADD_INT_LIT8((short)0xd8, "add-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| RSUB_INT_LIT8((short)0xd9, "rsub-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| MUL_INT_LIT8((short)0xda, "mul-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| DIV_INT_LIT8((short)0xdb, "div-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| REM_INT_LIT8((short)0xdc, "rem-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| AND_INT_LIT8((short)0xdd, "and-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| OR_INT_LIT8((short)0xde, "or-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| XOR_INT_LIT8((short)0xdf, "xor-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SHL_INT_LIT8((short)0xe0, "shl-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SHR_INT_LIT8((short)0xe1, "shr-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| USHR_INT_LIT8((short)0xe2, "ushr-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| |
| IGET_VOLATILE((short)0xe3, "iget-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IPUT_VOLATILE((short)0xe4, "iput-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SGET_VOLATILE((short)0xe5, "sget-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SPUT_VOLATILE((short)0xe6, "sput-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IGET_OBJECT_VOLATILE((short)0xe7, "iget-object-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IGET_WIDE_VOLATILE((short)0xe8, "iget-wide-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| IPUT_WIDE_VOLATILE((short)0xe9, "iput-wide-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SGET_WIDE_VOLATILE((short)0xea, "sget-wide-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| SPUT_WIDE_VOLATILE((short)0xeb, "sput-wide-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| |
| THROW_VERIFICATION_ERROR((short)0xed, "throw-verification-error", minApi(5), ReferenceType.NONE, Format.Format20bc, Opcode.ODEX_ONLY | Opcode.CAN_THROW), |
| EXECUTE_INLINE((short)0xee, "execute-inline", ReferenceType.NONE, Format.Format35mi, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| EXECUTE_INLINE_RANGE((short)0xef, "execute-inline/range", minApi(8), ReferenceType.NONE, Format.Format3rmi, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_DIRECT_EMPTY((short)0xf0, "invoke-direct-empty", maxApi(13), ReferenceType.METHOD, Format.Format35c, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT | Opcode.CAN_INITIALIZE_REFERENCE), |
| INVOKE_OBJECT_INIT_RANGE((short)0xf0, "invoke-object-init/range", minApi(14), ReferenceType.METHOD, Format.Format3rc, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT | Opcode.CAN_INITIALIZE_REFERENCE), |
| RETURN_VOID_BARRIER((short)0xf1, "return-void-barrier", minApi(11), ReferenceType.NONE, Format.Format10x, Opcode.ODEX_ONLY), |
| IGET_QUICK((short)0xf2, "iget-quick", ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IGET_WIDE_QUICK((short)0xf3, "iget-wide-quick", maxApi(22), ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), |
| IGET_OBJECT_QUICK((short)0xf4, "iget-object-quick", maxApi(22), ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| IPUT_QUICK((short)0xf5, "iput-quick", maxApi(22), ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IPUT_WIDE_QUICK((short)0xf6, "iput-wide-quick", maxApi(22), ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| IPUT_OBJECT_QUICK((short)0xf7, "iput-object-quick", maxApi(22), ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| INVOKE_VIRTUAL_QUICK((short)0xf8, "invoke-virtual-quick", maxApi(22), ReferenceType.NONE, Format.Format35ms, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_VIRTUAL_QUICK_RANGE((short)0xf9, "invoke-virtual-quick/range", maxApi(22), ReferenceType.NONE, Format.Format3rms, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_SUPER_QUICK((short)0xfa, "invoke-super-quick", ReferenceType.NONE, Format.Format35ms, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| INVOKE_SUPER_QUICK_RANGE((short)0xfb, "invoke-super-quick/range", ReferenceType.NONE, Format.Format3rms, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), |
| |
| IPUT_OBJECT_VOLATILE((short)0xfc, "iput-object-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| SGET_OBJECT_VOLATILE((short)0xfd, "sget-object-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), |
| SPUT_OBJECT_VOLATILE((short)0xfe, "sput-object-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), |
| |
| PACKED_SWITCH_PAYLOAD((short)0x100, "packed-switch-payload", ReferenceType.NONE, Format.PackedSwitchPayload, 0), |
| SPARSE_SWITCH_PAYLOAD((short)0x200, "sparse-switch-payload", ReferenceType.NONE, Format.SparseSwitchPayload, 0), |
| ARRAY_PAYLOAD((short)0x300, "array-payload", ReferenceType.NONE, Format.ArrayPayload, 0), |
| |
| // Reuse the deprecated f3-ff opcodes in Art: |
| INVOKE_LAMBDA((short)0xf3, "invoke-lambda", minApi(23), ReferenceType.NONE, Format.Format25x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT | Opcode.EXPERIMENTAL), |
| // TODO: What about JUMBO support if the string ID is too large? |
| CAPTURE_VARIABLE((short)0xf5, "capture-variable", minApi(23), ReferenceType.STRING, Format.Format21c, Opcode.EXPERIMENTAL), |
| CREATE_LAMBDA((short)0xf6, "create-lambda", minApi(23), ReferenceType.METHOD, Format.Format21c, Opcode.SETS_REGISTER | Opcode.EXPERIMENTAL), |
| // TODO: do we need a capture/liberate wide? |
| LIBERATE_VARIABLE((short)0xf7, "liberate-variable", minApi(23), ReferenceType.STRING, Format.Format22c, Opcode.SETS_REGISTER | Opcode.EXPERIMENTAL), |
| BOX_LAMBDA((short)0xf8, "box-lambda", minApi(23), ReferenceType.NONE, Format.Format22x, Opcode.SETS_REGISTER | Opcode.EXPERIMENTAL), |
| UNBOX_LAMBDA((short)0xf9, "unbox-lambda", minApi(23), ReferenceType.TYPE, Format.Format22c, Opcode.SETS_REGISTER | Opcode.EXPERIMENTAL); |
| |
| //if the instruction can throw an exception |
| public static final int CAN_THROW = 0x1; |
| //if the instruction is an odex only instruction |
| public static final int ODEX_ONLY = 0x2; |
| //if execution can continue to the next instruction |
| public static final int CAN_CONTINUE = 0x4; |
| //if the instruction sets the "hidden" result register |
| public static final int SETS_RESULT = 0x8; |
| //if the instruction sets the value of it's first register |
| public static final int SETS_REGISTER = 0x10; |
| //if the instruction sets the value of it's first register to a wide type |
| public static final int SETS_WIDE_REGISTER = 0x20; |
| //if the instruction is an odexed iget-quick/iput-quick instruction |
| public static final int ODEXED_INSTANCE_QUICK = 0x40; |
| //if the instruction is an odexed iget-volatile/iput-volatile instruction |
| public static final int ODEXED_INSTANCE_VOLATILE = 0x80; |
| //if the instruction is an odexed sget-volatile/sput-volatile instruction |
| public static final int ODEXED_STATIC_VOLATILE = 0x100; |
| //if the instruction is a jumbo instruction |
| public static final int JUMBO_OPCODE = 0x200; |
| //if the instruction can initialize an uninitialized object reference |
| public static final int CAN_INITIALIZE_REFERENCE = 0x400; |
| //if the instruction is experimental (not potentially supported by Android runtime yet) |
| public static final int EXPERIMENTAL = 0x800; |
| |
| private static final int ALL_APIS = 0xFFFF0000; |
| |
| private static int minApi(int api) { |
| return 0xFFFF0000 | (api & 0xFFFF); |
| } |
| |
| private static int maxApi(int api) { |
| return api << 16; |
| } |
| |
| public final short value; |
| public final String name; |
| // high 16-bits is the max api, low 16-bits is the min api |
| public final int apiConstraints; |
| public final int referenceType; |
| public final Format format; |
| public final int flags; |
| |
| Opcode(short opcodeValue, String opcodeName, int referenceType, Format format) { |
| this(opcodeValue, opcodeName, ALL_APIS, referenceType, format, 0, (short)-1); |
| } |
| |
| Opcode(short opcodeValue, String opcodeName, int referenceType, Format format, int flags) { |
| this(opcodeValue, opcodeName, ALL_APIS, referenceType, format, flags, (short)-1); |
| } |
| |
| Opcode(short opcodeValue, String opcodeName, int referenceType, Format format, int flags, short jumboOpcodeValue) { |
| this(opcodeValue, opcodeName, ALL_APIS, referenceType, format, flags, jumboOpcodeValue); |
| } |
| |
| Opcode(short opcodeValue, String opcodeName, int apiConstraints, int referenceType, Format format) { |
| this(opcodeValue, opcodeName, apiConstraints, referenceType, format, 0, (short)-1); |
| } |
| |
| Opcode(short opcodeValue, String opcodeName, int apiConstraints, int referenceType, Format format, int flags) { |
| this(opcodeValue, opcodeName, apiConstraints, referenceType, format, flags, (short)-1); |
| } |
| |
| Opcode(short opcodeValue, String opcodeName, int apiConstraints, int referenceType, Format format, int flags, |
| short jumboOpcodeValue) { |
| this.value = opcodeValue; |
| this.name = opcodeName; |
| this.apiConstraints = apiConstraints; |
| this.referenceType = referenceType; |
| this.format = format; |
| this.flags = flags; |
| // TODO: implement jumbo opcodes for dexlib2 and uncomment |
| // this.jumboOpcode = jumboOpcodeValue; |
| } |
| |
| /** |
| * @return the minimum api level that can use this opcode (inclusive) |
| */ |
| public int getMinApi() { |
| return apiConstraints & 0xFFFF; |
| } |
| |
| /** |
| * @return the maximum api level that can to use this opcode (inclusive) |
| */ |
| public int getMaxApi() { |
| return apiConstraints >>> 16; |
| } |
| |
| public final boolean canThrow() { |
| return (flags & CAN_THROW) != 0; |
| } |
| |
| public final boolean odexOnly() { |
| return (flags & ODEX_ONLY) != 0; |
| } |
| |
| public final boolean canContinue() { |
| return (flags & CAN_CONTINUE) != 0; |
| } |
| |
| public final boolean setsResult() { |
| return (flags & SETS_RESULT) != 0; |
| } |
| |
| public final boolean setsRegister() { |
| return (flags & SETS_REGISTER) != 0; |
| } |
| |
| public final boolean setsWideRegister() { |
| return (flags & SETS_WIDE_REGISTER) != 0; |
| } |
| |
| public final boolean isOdexedInstanceQuick() { |
| return (flags & ODEXED_INSTANCE_QUICK) != 0; |
| } |
| |
| public final boolean isOdexedInstanceVolatile() { |
| return (flags & ODEXED_INSTANCE_VOLATILE) != 0; |
| } |
| |
| public final boolean isOdexedStaticVolatile() { |
| return (flags & ODEXED_STATIC_VOLATILE) != 0; |
| } |
| |
| public final boolean isJumboOpcode() { |
| return (flags & JUMBO_OPCODE) != 0; |
| } |
| |
| public final boolean canInitializeReference() { |
| return (flags & CAN_INITIALIZE_REFERENCE) != 0; |
| } |
| |
| public final boolean isExperimental() { |
| return (flags & EXPERIMENTAL) != 0; |
| } |
| } |
