| #ifndef SG_LIB_H |
| #define SG_LIB_H |
| |
| /* |
| * Copyright (c) 2004-2007 Douglas Gilbert. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| */ |
| |
| /* Version 1.34 [20070422] |
| * |
| * On 5th October 2004 a FreeBSD license was added to this file. |
| * The intention is to keep this file and the related sg_lib.c file |
| * as open source and encourage their unencumbered use. |
| */ |
| |
| |
| /* |
| * This header file contains defines and function declarations that may |
| * be useful to applications that communicate with devices that use a |
| * SCSI command set. These command sets have names like SPC-4, SBC-3, |
| * SSC-3, SES-2 and draft standards defining them can be found at |
| * http://www.t10.org . Virtually all devices in the Linux SCSI subsystem |
| * utilize SCSI command sets. Many devices in other Linux device subsystems |
| * utilize SCSI command sets either natively or via emulation (e.g. a |
| * parallel ATA disk in a USB enclosure). |
| */ |
| |
| #include <stdio.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #ifndef SAM_STAT_GOOD |
| /* The SCSI status codes as found in SAM-4 at www.t10.org */ |
| #define SAM_STAT_GOOD 0x0 |
| #define SAM_STAT_CHECK_CONDITION 0x2 |
| #define SAM_STAT_CONDITION_MET 0x4 |
| #define SAM_STAT_BUSY 0x8 |
| #define SAM_STAT_INTERMEDIATE 0x10 /* obsolete in SAM-4 */ |
| #define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14 /* obsolete in SAM-4 */ |
| #define SAM_STAT_RESERVATION_CONFLICT 0x18 |
| #define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */ |
| #define SAM_STAT_TASK_SET_FULL 0x28 |
| #define SAM_STAT_ACA_ACTIVE 0x30 |
| #define SAM_STAT_TASK_ABORTED 0x40 |
| #endif |
| |
| /* The SCSI sense key codes as found in SPC-4 at www.t10.org */ |
| #define SPC_SK_NO_SENSE 0x0 |
| #define SPC_SK_RECOVERED_ERROR 0x1 |
| #define SPC_SK_NOT_READY 0x2 |
| #define SPC_SK_MEDIUM_ERROR 0x3 |
| #define SPC_SK_HARDWARE_ERROR 0x4 |
| #define SPC_SK_ILLEGAL_REQUEST 0x5 |
| #define SPC_SK_UNIT_ATTENTION 0x6 |
| #define SPC_SK_DATA_PROTECT 0x7 |
| #define SPC_SK_BLANK_CHECK 0x8 |
| #define SPC_SK_COPY_ABORTED 0xa |
| #define SPC_SK_ABORTED_COMMAND 0xb |
| #define SPC_SK_VOLUME_OVERFLOW 0xd |
| #define SPC_SK_MISCOMPARE 0xe |
| |
| |
| /* Returns length of SCSI command given the opcode (first byte). |
| Yields the wrong answer for variable length commands (opcode=0x7f) |
| and potentially some vendor specific commands. */ |
| extern int sg_get_command_size(unsigned char cdb_byte0); |
| |
| /* Command name given pointer to the cdb. Certain command names |
| depend on peripheral type (give 0 if unknown). Places command |
| name into buff and will write no more than buff_len bytes. */ |
| extern void sg_get_command_name(const unsigned char * cdbp, int peri_type, |
| int buff_len, char * buff); |
| |
| /* Command name given only the first byte (byte 0) of a cdb and |
| * peripheral type. */ |
| extern void sg_get_opcode_name(unsigned char cdb_byte0, int peri_type, |
| int buff_len, char * buff); |
| |
| /* Command name given opcode (byte 0), service action and peripheral type. |
| If no service action give 0, if unknown peripheral type give 0. */ |
| extern void sg_get_opcode_sa_name(unsigned char cdb_byte0, int service_action, |
| int peri_type, int buff_len, char * buff); |
| |
| /* Fetch scsi status string. */ |
| extern void sg_get_scsi_status_str(int scsi_status, int buff_len, char * buff); |
| |
| /* This is a slightly stretched SCSI sense "descriptor" format header. |
| The addition is to allow the 0x70 and 0x71 response codes. The idea |
| is to place the salient data of both "fixed" and "descriptor" sense |
| format into one structure to ease application processing. |
| The original sense buffer should be kept around for those cases |
| in which more information is required (e.g. the LBA of a MEDIUM ERROR). */ |
| struct sg_scsi_sense_hdr { |
| unsigned char response_code; /* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */ |
| unsigned char sense_key; |
| unsigned char asc; |
| unsigned char ascq; |
| unsigned char byte4; |
| unsigned char byte5; |
| unsigned char byte6; |
| unsigned char additional_length; |
| }; |
| |
| /* Maps the salient data from a sense buffer which is in either fixed or |
| descriptor format into a structure mimicking a descriptor format |
| header (i.e. the first 8 bytes of sense descriptor format). |
| If zero response code returns 0. Otherwise returns 1 and if 'sshp' is |
| non-NULL then zero all fields and then set the appropriate fields in |
| that structure. sshp::additional_length is always 0 for response |
| codes 0x70 and 0x71 (fixed format). */ |
| extern int sg_scsi_normalize_sense(const unsigned char * sensep, |
| int sense_len, |
| struct sg_scsi_sense_hdr * sshp); |
| |
| /* Attempt to find the first SCSI sense data descriptor that matches the |
| given 'desc_type'. If found return pointer to start of sense data |
| descriptor; otherwise (including fixed format sense data) returns NULL. */ |
| extern const unsigned char * sg_scsi_sense_desc_find( |
| const unsigned char * sensep, int sense_len, int desc_type); |
| |
| /* Yield string associated with sense_key value. Returns 'buff'. */ |
| extern char * sg_get_sense_key_str(int sense_key, int buff_len, char * buff); |
| |
| /* Yield string associated with ASC/ASCQ values. Returns 'buff'. */ |
| extern char * sg_get_asc_ascq_str(int asc, int ascq, int buff_len, |
| char * buff); |
| |
| /* Returns 1 if valid bit set, 0 if valid bit clear. Irrespective the |
| information field is written out via 'info_outp' (except when it is |
| NULL). Handles both fixed and descriptor sense formats. */ |
| extern int sg_get_sense_info_fld(const unsigned char * sensep, int sb_len, |
| unsigned long long * info_outp); |
| |
| /* Returns 1 if sense key is NO_SENSE or NOT_READY and SKSV is set. Places |
| progress field from sense data where progress_outp points. If progress |
| field is not available returns 0. Handles both fixed and descriptor |
| sense formats. N.B. App should multiply by 100 and divide by 65536 |
| to get percentage completion from given value. */ |
| extern int sg_get_sense_progress_fld(const unsigned char * sensep, |
| int sb_len, int * progress_outp); |
| |
| /* Closely related to sg_print_sense(). Puts decode sense data in 'buff'. |
| Usually multiline with multiple '\n' including one trailing. If |
| 'raw_sinfo' set appends sense buffer in hex. */ |
| extern void sg_get_sense_str(const char * leadin, |
| const unsigned char * sense_buffer, int sb_len, |
| int raw_sinfo, int buff_len, char * buff); |
| |
| /* Yield string associated with peripheral device type (pdt). Returns |
| 'buff'. If 'pdt' out of range yields "bad pdt" string. */ |
| extern char * sg_get_pdt_str(int pdt, int buff_len, char * buff); |
| |
| extern FILE * sg_warnings_strm; |
| |
| extern void sg_set_warnings_strm(FILE * warnings_strm); |
| |
| /* The following "print" functions send ACSII to 'sg_warnings_strm' file |
| descriptor (default value is stderr) */ |
| extern void sg_print_command(const unsigned char * command); |
| extern void sg_print_sense(const char * leadin, |
| const unsigned char * sense_buffer, int sb_len, |
| int raw_info); |
| extern void sg_print_scsi_status(int scsi_status); |
| |
| /* Utilities can use these process status values for syntax errors and |
| file (device node) problems (e.g. not found or permissions). */ |
| #define SG_LIB_SYNTAX_ERROR 1 |
| #define SG_LIB_FILE_ERROR 15 |
| |
| /* The sg_err_category_sense() function returns one of the following. |
| These may be used as process status values (on exit). Notice that |
| some of the lower values correspond to SCSI sense key values. */ |
| #define SG_LIB_CAT_CLEAN 0 /* No errors or other information */ |
| /* Value 1 left unused for utilities to use SG_LIB_SYNTAX_ERROR */ |
| #define SG_LIB_CAT_NOT_READY 2 /* interpreted from sense buffer */ |
| /* [sk,asc,ascq: 0x2,*,*] */ |
| #define SG_LIB_CAT_MEDIUM_HARD 3 /* medium or hardware error, blank check */ |
| /* [sk,asc,ascq: 0x3/0x4/0x8,*,*] */ |
| #define SG_LIB_CAT_ILLEGAL_REQ 5 /* Illegal request (other than invalid */ |
| /* opcode): [sk,asc,ascq: 0x5,*,*] */ |
| #define SG_LIB_CAT_UNIT_ATTENTION 6 /* interpreted from sense buffer */ |
| /* [sk,asc,ascq: 0x6,*,*] */ |
| /* was SG_LIB_CAT_MEDIA_CHANGED earlier [sk,asc,ascq: 0x6,0x28,*] */ |
| #define SG_LIB_CAT_INVALID_OP 9 /* (Illegal request,) Invalid opcode: */ |
| /* [sk,asc,ascq: 0x5,0x20,0x0] */ |
| #define SG_LIB_CAT_ABORTED_COMMAND 11 /* interpreted from sense buffer */ |
| /* [sk,asc,ascq: 0xb,*,*] */ |
| #define SG_LIB_CAT_NO_SENSE 20 /* sense data with key of "no sense" */ |
| /* [sk,asc,ascq: 0x0,*,*] */ |
| #define SG_LIB_CAT_RECOVERED 21 /* Successful command after recovered err */ |
| /* [sk,asc,ascq: 0x1,*,*] */ |
| #define SG_LIB_CAT_MALFORMED 97 /* Response to SCSI command malformed */ |
| #define SG_LIB_CAT_SENSE 98 /* Something else is in the sense buffer */ |
| #define SG_LIB_CAT_OTHER 99 /* Some other error/warning has occurred |
| (e.g. a transport or driver error) */ |
| |
| extern int sg_err_category_sense(const unsigned char * sense_buffer, |
| int sb_len); |
| |
| /* Here are some additional sense data categories that are not returned |
| by sg_err_category_sense() but are returned by some related functions. */ |
| #define SG_LIB_CAT_ILLEGAL_REQ_WITH_INFO 17 /* Illegal request (other than */ |
| /* invalid opcode) plus 'info' field: */ |
| /* [sk,asc,ascq: 0x5,*,*] */ |
| #define SG_LIB_CAT_MEDIUM_HARD_WITH_INFO 18 /* medium or hardware error */ |
| /* sense key plus 'info' field: */ |
| /* [sk,asc,ascq: 0x3/0x4,*,*] */ |
| #define SG_LIB_CAT_TIMEOUT 33 |
| |
| |
| /* Iterates to next designation descriptor in the device identification |
| VPD page. The 'initial_desig_desc' should point to start of first |
| descriptor with 'page_len' being the number of valid bytes in that |
| and following descriptors. To start, 'off' should point to a negative |
| value, thereafter it should point to the value yielded by the previous |
| call. If 0 returned then 'initial_desig_desc + *off' should be a valid |
| descriptor; returns -1 if normal end condition and -2 for an abnormal |
| termination. Matches association, designator_type and/or code_set when |
| any of those values are greater than or equal to zero. */ |
| extern int sg_vpd_dev_id_iter(const unsigned char * initial_desig_desc, |
| int page_len, int * off, int m_assoc, |
| int m_desig_type, int m_code_set); |
| |
| |
| /* <<< General purpose (i.e. not SCSI specific) utility functions >>> */ |
| |
| /* Always returns valid string even if errnum is wild (or library problem). |
| If errnum is negative, flip its sign. */ |
| extern char * safe_strerror(int errnum); |
| |
| |
| /* Print (to stdout) 'str' of bytes in hex, 16 bytes per line optionally |
| followed at the right hand side of the line with an ASCII interpretation. |
| Each line is prefixed with an address, starting at 0 for str[0]..str[15]. |
| All output numbers are in hex. 'no_ascii' allows for 3 output types: |
| > 0 each line has address then up to 16 ASCII-hex bytes |
| = 0 in addition, the bytes are listed in ASCII to the right |
| < 0 only the ASCII-hex bytes are listed (i.e. without address) |
| */ |
| extern void dStrHex(const char* str, int len, int no_ascii); |
| |
| /* Returns 1 when executed on big endian machine; else returns 0. |
| Useful for displaying ATA identify words (which need swapping on a |
| big endian machine). |
| */ |
| extern int sg_is_big_endian(); |
| |
| /* Extract character sequence from ATA words as in the model string |
| in a IDENTIFY DEVICE response. Returns number of characters |
| written to 'ochars' before 0 character is found or 'num' words |
| are processed. */ |
| extern int sg_ata_get_chars(const unsigned short * word_arr, int start_word, |
| int num_words, int is_big_endian, char * ochars); |
| |
| /* Print (to stdout) 16 bit 'words' in hex, 8 words per line optionally |
| followed at the right hand side of the line with an ASCII interpretation |
| (pairs of ASCII characters in big endian order (upper first)). |
| Each line is prefixed with an address, starting at 0. |
| All output numbers are in hex. 'no_ascii' allows for 3 output types: |
| > 0 each line has address then up to 8 ASCII-hex words |
| = 0 in addition, the words are listed in ASCII pairs to the right |
| = -1 only the ASCII-hex words are listed (i.e. without address) |
| = -2 only the ASCII-hex words, formatted for "hdparm --Istdin" |
| < -2 same as -1 |
| If 'swapb' non-zero then bytes in each word swapped. Needs to be set |
| for ATA IDENTIFY DEVICE response on big-endian machines. |
| */ |
| extern void dWordHex(const unsigned short* words, int num, int no_ascii, |
| int swapb); |
| |
| /* If the number in 'buf' can not be decoded or the multiplier is unknown |
| then -1 is returned. Accepts a hex prefix (0x or 0X) or a 'h' (or 'H') |
| suffix. Otherwise a decimal multiplier suffix may be given. Recognised |
| multipliers: c C *1; w W *2; b B *512; k K KiB *1,024; |
| KB *1,000; m M MiB *1,048,576; MB *1,000,000; g G GiB *1,073,741,824; |
| GB *1,000,000,000 and <n>x<m> which multiplies <n> by <m> . */ |
| extern int sg_get_num(const char * buf); |
| |
| /* If the number in 'buf' can not be decoded or the multiplier is unknown |
| then -1LL is returned. Accepts a hex prefix (0x or 0X) or a 'h' (or 'H') |
| suffix. Otherwise a decimal multiplier suffix may be given. In addition |
| to supporting the multipliers of sg_get_num(), this function supports: |
| t T TiB *(2**40); TB *(10**12); p P PiB *(2**50); PB *(10**15) . */ |
| extern long long sg_get_llnum(const char * buf); |
| |
| extern const char * sg_lib_version(); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |
