| /* |
| * Copyright (c) 1999-2007 Douglas Gilbert. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| */ |
| |
| /* |
| * CONTENTS |
| * Some SCSI commands are executed in many contexts and hence began |
| * to appear in several sg3_utils utilities. This files centralizes |
| * some of the low level command execution code. In most cases the |
| * interpretation of the command response is left to the each |
| * utility. |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include "sg_lib.h" |
| #include "sg_cmds_basic.h" |
| #include "sg_pt.h" |
| |
| |
| static char * version_str = "1.40 20070803"; |
| |
| |
| #define SENSE_BUFF_LEN 32 /* Arbitrary, could be larger */ |
| #define EBUFF_SZ 256 |
| |
| #define DEF_PT_TIMEOUT 60 /* 60 seconds */ |
| #define START_PT_TIMEOUT 120 /* 120 seconds == 2 minutes */ |
| #define LONG_PT_TIMEOUT 7200 /* 7,200 seconds == 120 minutes */ |
| |
| #define INQUIRY_CMD 0x12 |
| #define INQUIRY_CMDLEN 6 |
| #define SYNCHRONIZE_CACHE_CMD 0x35 |
| #define SYNCHRONIZE_CACHE_CMDLEN 10 |
| #define SERVICE_ACTION_IN_16_CMD 0x9e |
| #define SERVICE_ACTION_IN_16_CMDLEN 16 |
| #define READ_CAPACITY_16_SA 0x10 |
| #define READ_CAPACITY_10_CMD 0x25 |
| #define READ_CAPACITY_10_CMDLEN 10 |
| #define MODE_SENSE6_CMD 0x1a |
| #define MODE_SENSE6_CMDLEN 6 |
| #define MODE_SENSE10_CMD 0x5a |
| #define MODE_SENSE10_CMDLEN 10 |
| #define MODE_SELECT6_CMD 0x15 |
| #define MODE_SELECT6_CMDLEN 6 |
| #define MODE_SELECT10_CMD 0x55 |
| #define MODE_SELECT10_CMDLEN 10 |
| #define REQUEST_SENSE_CMD 0x3 |
| #define REQUEST_SENSE_CMDLEN 6 |
| #define REPORT_LUNS_CMD 0xa0 |
| #define REPORT_LUNS_CMDLEN 12 |
| #define LOG_SENSE_CMD 0x4d |
| #define LOG_SENSE_CMDLEN 10 |
| #define LOG_SELECT_CMD 0x4c |
| #define LOG_SELECT_CMDLEN 10 |
| #define TUR_CMD 0x0 |
| #define TUR_CMDLEN 6 |
| #define START_STOP_CMD 0x1b |
| #define START_STOP_CMDLEN 6 |
| #define PREVENT_ALLOW_CMD 0x1e |
| #define PREVENT_ALLOW_CMDLEN 6 |
| |
| #define MODE6_RESP_HDR_LEN 4 |
| #define MODE10_RESP_HDR_LEN 8 |
| #define MODE_RESP_ARB_LEN 1024 |
| |
| #define INQUIRY_RESP_INITIAL_LEN 36 |
| |
| |
| const char * sg_cmds_version() |
| { |
| return version_str; |
| } |
| |
| /* Returns file descriptor >= 0 if successful. If error in Unix returns |
| negated errno. */ |
| int sg_cmds_open_device(const char * device_name, int read_only, |
| int verbose) |
| { |
| return scsi_pt_open_device(device_name, read_only, verbose); |
| } |
| |
| /* Returns 0 if successful. If error in Unix returns negated errno. */ |
| int sg_cmds_close_device(int device_fd) |
| { |
| return scsi_pt_close_device(device_fd); |
| } |
| |
| |
| /* Returns -2 for sense data (may not be fatal), -1 for failed or the |
| number of bytes fetched. For data out (to device) or no data, set |
| 'mx_resp_len' to 0 or less. If -2 returned then sense category |
| output via 'o_sense_cat' pointer (if not NULL). Outputs to |
| sg_warnings_strm (def: stderr) if problems; depending on 'noisy' |
| and 'verbose' */ |
| int sg_cmds_process_resp(struct sg_pt_base * ptvp, const char * leadin, int res, |
| int mx_resp_len, const unsigned char * sense_b, |
| int noisy, int verbose, int * o_sense_cat) |
| { |
| int got, cat, duration, slen, scat, n, resid; |
| char b[1024]; |
| |
| if (NULL == leadin) |
| leadin = ""; |
| if (res < 0) { |
| if (noisy || verbose) |
| fprintf(sg_warnings_strm, "%s: pass through os error: %s\n", |
| leadin, safe_strerror(-res)); |
| return -1; |
| } else if (SCSI_PT_DO_BAD_PARAMS == res) { |
| fprintf(sg_warnings_strm, "%s: bad pass through setup\n", leadin); |
| return -1; |
| } else if (SCSI_PT_DO_TIMEOUT == res) { |
| fprintf(sg_warnings_strm, "%s: pass through timeout\n", leadin); |
| return -1; |
| } |
| if ((verbose > 2) && ((duration = get_scsi_pt_duration_ms(ptvp)) >= 0)) |
| fprintf(sg_warnings_strm, " duration=%d ms\n", duration); |
| resid = (mx_resp_len > 0) ? get_scsi_pt_resid(ptvp) : 0; |
| switch ((cat = get_scsi_pt_result_category(ptvp))) { |
| case SCSI_PT_RESULT_GOOD: |
| if (mx_resp_len > 0) { |
| got = mx_resp_len - resid; |
| if (verbose && (resid > 0)) |
| fprintf(sg_warnings_strm, " %s: requested %d bytes but " |
| "got %d bytes\n", leadin, mx_resp_len, got); |
| return got; |
| } else |
| return 0; |
| case SCSI_PT_RESULT_STATUS: /* other than GOOD and CHECK CONDITION */ |
| if (verbose || noisy) { |
| sg_get_scsi_status_str(get_scsi_pt_status_response(ptvp), |
| sizeof(b), b); |
| fprintf(sg_warnings_strm, "%s: scsi status: %s\n", leadin, b); |
| } |
| return -1; |
| case SCSI_PT_RESULT_SENSE: |
| slen = get_scsi_pt_sense_len(ptvp); |
| scat = sg_err_category_sense(sense_b, slen); |
| switch (scat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| case SG_LIB_CAT_NO_SENSE: |
| n = 0; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_MEDIUM_HARD: |
| default: |
| n = noisy; |
| break; |
| } |
| if (verbose || n) { |
| sg_get_sense_str(leadin, sense_b, slen, (verbose > 1), |
| sizeof(b), b); |
| fprintf(sg_warnings_strm, "%s", b); |
| } |
| if (verbose && (mx_resp_len > 0) && (resid > 0)) { |
| got = mx_resp_len - resid; |
| if ((verbose > 2) || (got > 0)) |
| fprintf(sg_warnings_strm, " requested %d bytes but " |
| "got %d bytes\n", mx_resp_len, got); |
| } |
| if (o_sense_cat) |
| *o_sense_cat = scat; |
| return -2; |
| case SCSI_PT_RESULT_TRANSPORT_ERR: |
| if (verbose || noisy) { |
| get_scsi_pt_transport_err_str(ptvp, sizeof(b), b); |
| fprintf(sg_warnings_strm, "%s: transport: %s\n", leadin, b); |
| } |
| return -1; |
| case SCSI_PT_RESULT_OS_ERR: |
| if (verbose || noisy) { |
| get_scsi_pt_os_err_str(ptvp, sizeof(b), b); |
| fprintf(sg_warnings_strm, "%s: os: %s\n", leadin, b); |
| } |
| return -1; |
| default: |
| fprintf(sg_warnings_strm, "%s: unknown pass through result " |
| "category (%d)\n", leadin, cat); |
| return -1; |
| } |
| } |
| |
| /* Invokes a SCSI INQUIRY command and yields the response |
| * Returns 0 when successful, SG_LIB_CAT_INVALID_OP -> not supported, |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, SG_LIB_CAT_ABORTED_COMMAND, |
| * SG_LIB_CAT_MALFORMED -> bad response, -1 -> other errors */ |
| int sg_ll_inquiry(int sg_fd, int cmddt, int evpd, int pg_op, |
| void * resp, int mx_resp_len, int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char inqCmdBlk[INQUIRY_CMDLEN] = {INQUIRY_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| unsigned char * up; |
| struct sg_pt_base * ptvp; |
| |
| if (cmddt) |
| inqCmdBlk[1] |= 2; |
| if (evpd) |
| inqCmdBlk[1] |= 1; |
| inqCmdBlk[2] = (unsigned char)pg_op; |
| /* 16 bit allocation length (was 8) is a recent SPC-3 addition */ |
| inqCmdBlk[3] = (unsigned char)((mx_resp_len >> 8) & 0xff); |
| inqCmdBlk[4] = (unsigned char)(mx_resp_len & 0xff); |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (verbose) { |
| fprintf(sg_warnings_strm, " inquiry cdb: "); |
| for (k = 0; k < INQUIRY_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", inqCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| if (resp && (mx_resp_len > 0)) { |
| up = (unsigned char *)resp; |
| up[0] = 0x7f; /* defensive prefill */ |
| if (mx_resp_len > 4) |
| up[4] = 0; |
| } |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "inquiry: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, inqCmdBlk, sizeof(inqCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "inquiry", res, mx_resp_len, sense_b, |
| noisy, verbose, &sense_cat); |
| destruct_scsi_pt_obj(ptvp); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else if (ret < 4) { |
| if (verbose) |
| fprintf(sg_warnings_strm, "inquiry: got too few " |
| "bytes (%d)\n", ret); |
| ret = SG_LIB_CAT_MALFORMED; |
| } else |
| ret = 0; |
| |
| return ret; |
| } |
| |
| /* Yields most of first 36 bytes of a standard INQUIRY (evpd==0) response. |
| * Returns 0 when successful, SG_LIB_CAT_INVALID_OP -> not supported, |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, SG_LIB_CAT_ABORTED_COMMAND, |
| * SG_LIB_CAT_MALFORMED -> bad response, -1 -> other errors */ |
| int sg_simple_inquiry(int sg_fd, struct sg_simple_inquiry_resp * inq_data, |
| int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char inqCmdBlk[INQUIRY_CMDLEN] = {INQUIRY_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| unsigned char inq_resp[INQUIRY_RESP_INITIAL_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (inq_data) { |
| memset(inq_data, 0, sizeof(* inq_data)); |
| inq_data->peripheral_qualifier = 0x3; |
| inq_data->peripheral_type = 0x1f; |
| } |
| inqCmdBlk[4] = (unsigned char)sizeof(inq_resp); |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (verbose) { |
| fprintf(sg_warnings_strm, " inquiry cdb: "); |
| for (k = 0; k < INQUIRY_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", inqCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| memset(inq_resp, 0, sizeof(inq_resp)); |
| inq_resp[0] = 0x7f; /* defensive prefill */ |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "inquiry: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, inqCmdBlk, sizeof(inqCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, inq_resp, sizeof(inq_resp)); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "inquiry", res, sizeof(inq_resp), |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else if (ret < 4) { |
| if (verbose) |
| fprintf(sg_warnings_strm, "inquiry: got too few " |
| "bytes (%d)\n", ret); |
| ret = SG_LIB_CAT_MALFORMED; |
| } else |
| ret = 0; |
| |
| if (0 == ret) { |
| inq_data->peripheral_qualifier = (inq_resp[0] >> 5) & 0x7; |
| inq_data->peripheral_type = inq_resp[0] & 0x1f; |
| inq_data->rmb = (inq_resp[1] & 0x80) ? 1 : 0; |
| inq_data->version = inq_resp[2]; |
| inq_data->byte_3 = inq_resp[3]; |
| inq_data->byte_5 = inq_resp[5]; |
| inq_data->byte_6 = inq_resp[6]; |
| inq_data->byte_7 = inq_resp[7]; |
| memcpy(inq_data->vendor, inq_resp + 8, 8); |
| memcpy(inq_data->product, inq_resp + 16, 16); |
| memcpy(inq_data->revision, inq_resp + 32, 4); |
| } |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI TEST UNIT READY command. |
| * 'pack_id' is just for diagnostics, safe to set to 0. |
| * Looks for progress indicator if 'progress' non-NULL; |
| * if found writes value [0..65535] else write -1. |
| * Return of 0 -> success, SG_LIB_CAT_UNIT_ATTENTION, |
| * SG_LIB_CAT_ABORTED_COMMAND, SG_LIB_CAT_NOT_READY -> |
| * device not ready, -1 -> other failure */ |
| int sg_ll_test_unit_ready_progress(int sg_fd, int pack_id, int * progress, |
| int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char turCmdBlk[TUR_CMDLEN] = {TUR_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (verbose) { |
| fprintf(sg_warnings_strm, " test unit ready cdb: "); |
| for (k = 0; k < TUR_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", turCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "test unit ready: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, turCmdBlk, sizeof(turCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_packet_id(ptvp, pack_id); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "test unit ready", res, 0, sense_b, |
| noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| if (progress) { |
| int slen = get_scsi_pt_sense_len(ptvp); |
| |
| if (! sg_get_sense_progress_fld(sense_b, slen, progress)) |
| *progress = -1; |
| } |
| switch (sense_cat) { |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI TEST UNIT READY command. |
| * 'pack_id' is just for diagnostics, safe to set to 0. |
| * Return of 0 -> success, SG_LIB_CAT_UNIT_ATTENTION, |
| * SG_LIB_CAT_ABORTED_COMMAND, SG_LIB_CAT_NOT_READY -> |
| * device not ready, -1 -> other failure */ |
| int sg_ll_test_unit_ready(int sg_fd, int pack_id, int noisy, int verbose) |
| { |
| return sg_ll_test_unit_ready_progress(sg_fd, pack_id, NULL, noisy, |
| verbose); |
| } |
| |
| /* Invokes a SCSI SYNCHRONIZE CACHE (10) command. Return of 0 -> success, |
| * SG_LIB_CAT_UNIT_ATTENTION -> repeat, |
| * SG_LIB_CAT_INVALID_OP -> cdb not supported, |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, SG_LIB_CAT_ABORTED_COMMAND, |
| * SG_LIB_CAT_NOT_READY -> device not ready, -1 -> other failure */ |
| int sg_ll_sync_cache_10(int sg_fd, int sync_nv, int immed, int group, |
| unsigned int lba, unsigned int count, int noisy, |
| int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char scCmdBlk[SYNCHRONIZE_CACHE_CMDLEN] = |
| {SYNCHRONIZE_CACHE_CMD, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (sync_nv) |
| scCmdBlk[1] |= 4; |
| if (immed) |
| scCmdBlk[1] |= 2; |
| scCmdBlk[2] = (lba >> 24) & 0xff; |
| scCmdBlk[3] = (lba >> 16) & 0xff; |
| scCmdBlk[4] = (lba >> 8) & 0xff; |
| scCmdBlk[5] = lba & 0xff; |
| scCmdBlk[6] = group & 0x1f; |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (count > 0xffff) { |
| fprintf(sg_warnings_strm, "count too big\n"); |
| return -1; |
| } |
| scCmdBlk[7] = (count >> 8) & 0xff; |
| scCmdBlk[8] = count & 0xff; |
| |
| if (verbose) { |
| fprintf(sg_warnings_strm, " synchronize cache(10) cdb: "); |
| for (k = 0; k < SYNCHRONIZE_CACHE_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", scCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "synchronize cache(10): out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, scCmdBlk, sizeof(scCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "synchronize cache(10)", res, 0, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI READ CAPACITY (16) command. Returns 0 -> success, |
| * SG_LIB_CAT_UNIT_ATTENTION -> media changed??, SG_LIB_CAT_INVALID_OP |
| * -> cdb not supported, SG_LIB_CAT_IlLEGAL_REQ -> bad field in cdb, |
| * SG_LIB_CAT_ABORTED_COMMAND, SG_LIB_CAT_NOT_READY -> device not ready, |
| * -1 -> other failure */ |
| int sg_ll_readcap_16(int sg_fd, int pmi, unsigned long long llba, |
| void * resp, int mx_resp_len, int noisy, int verbose) |
| { |
| int k, ret, res, sense_cat; |
| unsigned char rcCmdBlk[SERVICE_ACTION_IN_16_CMDLEN] = |
| {SERVICE_ACTION_IN_16_CMD, READ_CAPACITY_16_SA, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (pmi) { /* lbs only valid when pmi set */ |
| rcCmdBlk[14] |= 1; |
| rcCmdBlk[2] = (llba >> 56) & 0xff; |
| rcCmdBlk[3] = (llba >> 48) & 0xff; |
| rcCmdBlk[4] = (llba >> 40) & 0xff; |
| rcCmdBlk[5] = (llba >> 32) & 0xff; |
| rcCmdBlk[6] = (llba >> 24) & 0xff; |
| rcCmdBlk[7] = (llba >> 16) & 0xff; |
| rcCmdBlk[8] = (llba >> 8) & 0xff; |
| rcCmdBlk[9] = llba & 0xff; |
| } |
| /* Allocation length, no guidance in SBC-2 rev 15b */ |
| rcCmdBlk[10] = (mx_resp_len >> 24) & 0xff; |
| rcCmdBlk[11] = (mx_resp_len >> 16) & 0xff; |
| rcCmdBlk[12] = (mx_resp_len >> 8) & 0xff; |
| rcCmdBlk[13] = mx_resp_len & 0xff; |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (verbose) { |
| fprintf(sg_warnings_strm, " read capacity (16) cdb: "); |
| for (k = 0; k < SERVICE_ACTION_IN_16_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", rcCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "read capacity (16): out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, rcCmdBlk, sizeof(rcCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "read capacity (16)", res, mx_resp_len, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI READ CAPACITY (10) command. Returns 0 -> success, |
| * SG_LIB_CAT_UNIT_ATTENTION -> media changed??, SG_LIB_CAT_INVALID_OP |
| * -> cdb not supported, SG_LIB_CAT_IlLEGAL_REQ -> bad field in cdb, |
| * SG_LIB_CAT_ABORTED_COMMAND, SG_LIB_CAT_NOT_READY -> device not ready, |
| * -1 -> other failure */ |
| int sg_ll_readcap_10(int sg_fd, int pmi, unsigned int lba, |
| void * resp, int mx_resp_len, int noisy, int verbose) |
| { |
| int k, ret, res, sense_cat; |
| unsigned char rcCmdBlk[READ_CAPACITY_10_CMDLEN] = |
| {READ_CAPACITY_10_CMD, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (pmi) { /* lbs only valid when pmi set */ |
| rcCmdBlk[8] |= 1; |
| rcCmdBlk[2] = (lba >> 24) & 0xff; |
| rcCmdBlk[3] = (lba >> 16) & 0xff; |
| rcCmdBlk[4] = (lba >> 8) & 0xff; |
| rcCmdBlk[5] = lba & 0xff; |
| } |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (verbose) { |
| fprintf(sg_warnings_strm, " read capacity (10) cdb: "); |
| for (k = 0; k < READ_CAPACITY_10_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", rcCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "read capacity (10): out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, rcCmdBlk, sizeof(rcCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "read capacity (10)", res, mx_resp_len, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI MODE SENSE (6) command. Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> invalid opcode, SG_LIB_CAT_ILLEGAL_REQ -> |
| * bad field in cdb, * SG_LIB_CAT_NOT_READY -> device not ready, |
| * SG_LIB_CAT_ABORTED_COMMAND, SG_LIB_CAT_UNIT_ATTENTION, |
| * -1 -> other failure */ |
| int sg_ll_mode_sense6(int sg_fd, int dbd, int pc, int pg_code, int sub_pg_code, |
| void * resp, int mx_resp_len, int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char modesCmdBlk[MODE_SENSE6_CMDLEN] = |
| {MODE_SENSE6_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| modesCmdBlk[1] = (unsigned char)(dbd ? 0x8 : 0); |
| modesCmdBlk[2] = (unsigned char)(((pc << 6) & 0xc0) | (pg_code & 0x3f)); |
| modesCmdBlk[3] = (unsigned char)(sub_pg_code & 0xff); |
| modesCmdBlk[4] = (unsigned char)(mx_resp_len & 0xff); |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (mx_resp_len > 0xff) { |
| fprintf(sg_warnings_strm, "mx_resp_len too big\n"); |
| return -1; |
| } |
| if (verbose) { |
| fprintf(sg_warnings_strm, " mode sense (6) cdb: "); |
| for (k = 0; k < MODE_SENSE6_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", modesCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "mode sense (6): out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, modesCmdBlk, sizeof(modesCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "mode sense (6)", res, mx_resp_len, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else { |
| if ((verbose > 2) && (ret > 0)) { |
| fprintf(sg_warnings_strm, " mode sense (6): response%s\n", |
| (ret > 256 ? ", first 256 bytes" : "")); |
| dStrHex((const char *)resp, (ret > 256 ? 256 : ret), -1); |
| } |
| ret = 0; |
| } |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI MODE SENSE (10) command. Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> invalid opcode, SG_LIB_CAT_ILLEGAL_REQ -> |
| * bad field in cdb, * SG_LIB_CAT_NOT_READY -> device not ready, |
| * SG_LIB_CAT_ABORTED_COMMAND, SG_LIB_CAT_UNIT_ATTENTION, |
| * -1 -> other failure */ |
| int sg_ll_mode_sense10(int sg_fd, int llbaa, int dbd, int pc, int pg_code, |
| int sub_pg_code, void * resp, int mx_resp_len, |
| int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char modesCmdBlk[MODE_SENSE10_CMDLEN] = |
| {MODE_SENSE10_CMD, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| modesCmdBlk[1] = (unsigned char)((dbd ? 0x8 : 0) | (llbaa ? 0x10 : 0)); |
| modesCmdBlk[2] = (unsigned char)(((pc << 6) & 0xc0) | (pg_code & 0x3f)); |
| modesCmdBlk[3] = (unsigned char)(sub_pg_code & 0xff); |
| modesCmdBlk[7] = (unsigned char)((mx_resp_len >> 8) & 0xff); |
| modesCmdBlk[8] = (unsigned char)(mx_resp_len & 0xff); |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (mx_resp_len > 0xffff) { |
| fprintf(sg_warnings_strm, "mx_resp_len too big\n"); |
| return -1; |
| } |
| if (verbose) { |
| fprintf(sg_warnings_strm, " mode sense (10) cdb: "); |
| for (k = 0; k < MODE_SENSE10_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", modesCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "mode sense (10): out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, modesCmdBlk, sizeof(modesCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "mode sense (10)", res, mx_resp_len, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else { |
| if ((verbose > 2) && (ret > 0)) { |
| fprintf(sg_warnings_strm, " mode sense (10): response%s\n", |
| (ret > 256 ? ", first 256 bytes" : "")); |
| dStrHex((const char *)resp, (ret > 256 ? 256 : ret), -1); |
| } |
| ret = 0; |
| } |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI MODE SELECT (6) command. Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> invalid opcode, SG_LIB_CAT_ILLEGAL_REQ -> |
| * bad field in cdb, * SG_LIB_CAT_NOT_READY -> device not ready, |
| * SG_LIB_CAT_ABORTED_COMMAND, SG_LIB_CAT_UNIT_ATTENTION, |
| * -1 -> other failure */ |
| int sg_ll_mode_select6(int sg_fd, int pf, int sp, void * paramp, |
| int param_len, int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char modesCmdBlk[MODE_SELECT6_CMDLEN] = |
| {MODE_SELECT6_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| modesCmdBlk[1] = (unsigned char)(((pf << 4) & 0x10) | (sp & 0x1)); |
| modesCmdBlk[4] = (unsigned char)(param_len & 0xff); |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (param_len > 0xff) { |
| fprintf(sg_warnings_strm, "mode select (6): param_len too big\n"); |
| return -1; |
| } |
| if (verbose) { |
| fprintf(sg_warnings_strm, " mode select (6) cdb: "); |
| for (k = 0; k < MODE_SELECT6_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", modesCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| if (verbose > 1) { |
| fprintf(sg_warnings_strm, " mode select (6) parameter list\n"); |
| dStrHex((const char *)paramp, param_len, -1); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "mode select (6): out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, modesCmdBlk, sizeof(modesCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_out(ptvp, (unsigned char *)paramp, param_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "mode select (6)", res, 0, sense_b, |
| noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI MODE SELECT (10) command. Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> invalid opcode, SG_LIB_CAT_ILLEGAL_REQ -> |
| * bad field in cdb, * SG_LIB_CAT_NOT_READY -> device not ready, |
| * SG_LIB_CAT_ABORTED_COMMAND, SG_LIB_CAT_UNIT_ATTENTION, |
| * -1 -> other failure */ |
| int sg_ll_mode_select10(int sg_fd, int pf, int sp, void * paramp, |
| int param_len, int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char modesCmdBlk[MODE_SELECT10_CMDLEN] = |
| {MODE_SELECT10_CMD, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| modesCmdBlk[1] = (unsigned char)(((pf << 4) & 0x10) | (sp & 0x1)); |
| modesCmdBlk[7] = (unsigned char)((param_len >> 8) & 0xff); |
| modesCmdBlk[8] = (unsigned char)(param_len & 0xff); |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (param_len > 0xffff) { |
| fprintf(sg_warnings_strm, "mode select (10): param_len too big\n"); |
| return -1; |
| } |
| if (verbose) { |
| fprintf(sg_warnings_strm, " mode select (10) cdb: "); |
| for (k = 0; k < MODE_SELECT10_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", modesCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| if (verbose > 1) { |
| fprintf(sg_warnings_strm, " mode select (10) parameter list\n"); |
| dStrHex((const char *)paramp, param_len, -1); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "mode select (10): out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, modesCmdBlk, sizeof(modesCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_out(ptvp, (unsigned char *)paramp, param_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "mode select (10)", res, 0, sense_b, |
| noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* MODE SENSE commands yield a response that has block descriptors followed |
| * by mode pages. In most cases users are interested in the first mode page. |
| * This function returns the (byte) offset of the start of the first mode |
| * page. Set mode_sense_6 to 1 for MODE SENSE (6) and 0 for MODE SENSE (10). |
| * Returns >= 0 is successful or -1 if failure. If there is a failure |
| * a message is written to err_buff. */ |
| int sg_mode_page_offset(const unsigned char * resp, int resp_len, |
| int mode_sense_6, char * err_buff, int err_buff_len) |
| { |
| int bd_len; |
| int calc_len; |
| int offset; |
| |
| if ((NULL == resp) || (resp_len < 4) || |
| ((! mode_sense_6) && (resp_len < 8))) { |
| snprintf(err_buff, err_buff_len, "given response length too short: " |
| "%d\n", resp_len); |
| return -1; |
| } |
| if (mode_sense_6) { |
| calc_len = resp[0] + 1; |
| bd_len = resp[3]; |
| offset = bd_len + MODE6_RESP_HDR_LEN; |
| } else { |
| calc_len = (resp[0] << 8) + resp[1] + 2; |
| bd_len = (resp[6] << 8) + resp[7]; |
| /* LongLBA doesn't change this calculation */ |
| offset = bd_len + MODE10_RESP_HDR_LEN; |
| } |
| if ((offset + 2) > resp_len) { |
| snprintf(err_buff, err_buff_len, "given response length " |
| "too small, offset=%d given_len=%d bd_len=%d\n", |
| offset, resp_len, bd_len); |
| offset = -1; |
| } else if ((offset + 2) > calc_len) { |
| snprintf(err_buff, err_buff_len, "calculated response " |
| "length too small, offset=%d calc_len=%d bd_len=%d\n", |
| offset, calc_len, bd_len); |
| offset = -1; |
| } |
| return offset; |
| } |
| |
| /* Fetches current, changeable, default and/or saveable modes pages as |
| * indicated by pcontrol_arr for given pg_code and sub_pg_code. If |
| * mode6==0 then use MODE SENSE (10) else use MODE SENSE (6). If |
| * flexible set and mode data length seems wrong then try and |
| * fix (compensating hack for bad device or driver). pcontrol_arr |
| * should have 4 elements for output of current, changeable, default |
| * and saved values respectively. Each element should be NULL or |
| * at least mx_mpage_len bytes long. |
| * Return of 0 -> overall success, SG_LIB_CAT_INVALID_OP -> invalid opcode, |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, SG_LIB_CAT_UNIT_ATTENTION, |
| * SG_LIB_CAT_NOT_READY -> device not ready, |
| * SG_LIB_CAT_MALFORMED -> bad response, -1 -> other failure. |
| * If success_mask pointer is not NULL then first zeros it. Then set bits |
| * 0, 1, 2 and/or 3 if the current, changeable, default and saved values |
| * respectively have been fetched. If error on current page |
| * then stops and returns that error; otherwise continues if an error is |
| * detected but returns the first error encountered. */ |
| int sg_get_mode_page_controls(int sg_fd, int mode6, int pg_code, |
| int sub_pg_code, int dbd, int flexible, |
| int mx_mpage_len, int * success_mask, |
| void * pcontrol_arr[], int * reported_len, |
| int verbose) |
| { |
| int k, n, res, offset, calc_len, xfer_len, resp_mode6; |
| unsigned char buff[MODE_RESP_ARB_LEN]; |
| char ebuff[EBUFF_SZ]; |
| int first_err = 0; |
| |
| if (success_mask) |
| *success_mask = 0; |
| if (reported_len) |
| *reported_len = 0; |
| if (mx_mpage_len < 4) |
| return 0; |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| memset(ebuff, 0, sizeof(ebuff)); |
| /* first try to find length of current page response */ |
| memset(buff, 0, MODE10_RESP_HDR_LEN); |
| if (mode6) /* want first 8 bytes just in case */ |
| res = sg_ll_mode_sense6(sg_fd, dbd, 0 /* pc */, pg_code, |
| sub_pg_code, buff, MODE10_RESP_HDR_LEN, 0, |
| verbose); |
| else |
| res = sg_ll_mode_sense10(sg_fd, 0 /* llbaa */, dbd, |
| 0 /* pc */, pg_code, sub_pg_code, buff, |
| MODE10_RESP_HDR_LEN, 0, verbose); |
| if (0 != res) |
| return res; |
| n = buff[0]; |
| if (reported_len) |
| *reported_len = mode6 ? (n + 1) : ((n << 8) + buff[1] + 2); |
| resp_mode6 = mode6; |
| if (flexible) { |
| if (mode6 && (n < 3)) { |
| resp_mode6 = 0; |
| if (verbose) |
| fprintf(sg_warnings_strm, ">>> msense(6) but resp[0]=%d so " |
| "try msense(10) response processing\n", n); |
| } |
| if ((0 == mode6) && (n > 5)) { |
| if ((n > 11) && (0 == (n % 2)) && (0 == buff[4]) && |
| (0 == buff[5]) && (0 == buff[6])) { |
| buff[1] = n; |
| buff[0] = 0; |
| if (verbose) |
| fprintf(sg_warnings_strm, ">>> msense(10) but resp[0]=%d " |
| "and not msense(6) response so fix length\n", n); |
| } else |
| resp_mode6 = 1; |
| } |
| } |
| if (verbose && (resp_mode6 != mode6)) |
| fprintf(sg_warnings_strm, ">>> msense(%d) but resp[0]=%d " |
| "so switch response processing\n", (mode6 ? 6 : 10), |
| buff[0]); |
| calc_len = resp_mode6 ? (buff[0] + 1) : ((buff[0] << 8) + buff[1] + 2); |
| if (calc_len > MODE_RESP_ARB_LEN) |
| calc_len = MODE_RESP_ARB_LEN; |
| offset = sg_mode_page_offset(buff, calc_len, resp_mode6, |
| ebuff, EBUFF_SZ); |
| if (offset < 0) { |
| if (('\0' != ebuff[0]) && (verbose > 0)) |
| fprintf(sg_warnings_strm, "sg_get_mode_page_controls: %s\n", |
| ebuff); |
| return SG_LIB_CAT_MALFORMED; |
| } |
| xfer_len = calc_len - offset; |
| if (xfer_len > mx_mpage_len) |
| xfer_len = mx_mpage_len; |
| |
| for (k = 0; k < 4; ++k) { |
| if (NULL == pcontrol_arr[k]) |
| continue; |
| memset(pcontrol_arr[k], 0, mx_mpage_len); |
| if (mode6) |
| res = sg_ll_mode_sense6(sg_fd, dbd, k /* pc */, |
| pg_code, sub_pg_code, buff, |
| calc_len, 0, verbose); |
| else |
| res = sg_ll_mode_sense10(sg_fd, 0 /* llbaa */, dbd, |
| k /* pc */, pg_code, sub_pg_code, |
| buff, calc_len, 0, verbose); |
| if (0 != res) { |
| if (0 == first_err) |
| first_err = res; |
| if (0 == k) |
| break; /* if problem on current page, it won't improve */ |
| else |
| continue; |
| } |
| if (xfer_len > 0) |
| memcpy(pcontrol_arr[k], buff + offset, xfer_len); |
| if (success_mask) |
| *success_mask |= (1 << k); |
| } |
| return first_err; |
| } |
| |
| /* Invokes a SCSI REQUEST SENSE command. Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> Request Sense not supported??, |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, |
| * SG_LIB_CAT_ABORTED_COMMAND, -1 -> other failure */ |
| int sg_ll_request_sense(int sg_fd, int desc, void * resp, int mx_resp_len, |
| int noisy, int verbose) |
| { |
| int k, ret, res, sense_cat; |
| unsigned char rsCmdBlk[REQUEST_SENSE_CMDLEN] = |
| {REQUEST_SENSE_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (desc) |
| rsCmdBlk[1] |= 0x1; |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (mx_resp_len > 0xfc) { |
| fprintf(sg_warnings_strm, "SPC-3 says request sense allocation " |
| "length should be <= 252\n"); |
| return -1; |
| } |
| rsCmdBlk[4] = mx_resp_len & 0xff; |
| if (verbose) { |
| fprintf(sg_warnings_strm, " Request Sense cmd: "); |
| for (k = 0; k < REQUEST_SENSE_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", rsCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "request sense: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, rsCmdBlk, sizeof(rsCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "request sense", res, mx_resp_len, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| case SG_LIB_CAT_NOT_READY: /* shouldn't happen ?? */ |
| default: |
| ret = -1; |
| break; |
| } |
| } else { |
| if ((mx_resp_len >= 8) && (ret < 8)) { |
| if (verbose) |
| fprintf(sg_warnings_strm, " request sense: got %d " |
| "bytes in response, too short\n", ret); |
| ret = -1; |
| } else |
| ret = 0; |
| } |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI REPORT LUNS command. Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> Report Luns not supported, |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, |
| * SG_LIB_CAT_ABORTED_COMMAND, |
| * SG_LIB_NOT_READY (shouldn't happen), -1 -> other failure */ |
| int sg_ll_report_luns(int sg_fd, int select_report, void * resp, |
| int mx_resp_len, int noisy, int verbose) |
| { |
| int k, ret, res, sense_cat; |
| unsigned char rlCmdBlk[REPORT_LUNS_CMDLEN] = |
| {REPORT_LUNS_CMD, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| rlCmdBlk[2] = select_report & 0xff; |
| rlCmdBlk[6] = (mx_resp_len >> 24) & 0xff; |
| rlCmdBlk[7] = (mx_resp_len >> 16) & 0xff; |
| rlCmdBlk[8] = (mx_resp_len >> 8) & 0xff; |
| rlCmdBlk[9] = mx_resp_len & 0xff; |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (verbose) { |
| fprintf(sg_warnings_strm, " report luns cdb: "); |
| for (k = 0; k < REPORT_LUNS_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", rlCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "report luns: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, rlCmdBlk, sizeof(rlCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "report luns", res, mx_resp_len, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| case SG_LIB_CAT_NOT_READY: /* shouldn't happen ?? */ |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI LOG SENSE command. Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> Log Sense not supported, |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, SG_LIB_CAT_UNIT_ATTENTION, |
| * SG_LIB_CAT_NOT_READY -> device not ready, SG_LIB_CAT_ABORTED_COMMAND, |
| * -1 -> other failure */ |
| int sg_ll_log_sense(int sg_fd, int ppc, int sp, int pc, int pg_code, |
| int subpg_code, int paramp, unsigned char * resp, |
| int mx_resp_len, int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char logsCmdBlk[LOG_SENSE_CMDLEN] = |
| {LOG_SENSE_CMD, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (mx_resp_len > 0xffff) { |
| fprintf(sg_warnings_strm, "mx_resp_len too big\n"); |
| return -1; |
| } |
| logsCmdBlk[1] = (unsigned char)((ppc ? 2 : 0) | (sp ? 1 : 0)); |
| logsCmdBlk[2] = (unsigned char)(((pc << 6) & 0xc0) | (pg_code & 0x3f)); |
| logsCmdBlk[3] = (unsigned char)(subpg_code & 0xff); |
| logsCmdBlk[5] = (unsigned char)((paramp >> 8) & 0xff); |
| logsCmdBlk[6] = (unsigned char)(paramp & 0xff); |
| logsCmdBlk[7] = (unsigned char)((mx_resp_len >> 8) & 0xff); |
| logsCmdBlk[8] = (unsigned char)(mx_resp_len & 0xff); |
| if (verbose) { |
| fprintf(sg_warnings_strm, " log sense cdb: "); |
| for (k = 0; k < LOG_SENSE_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", logsCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "log sense: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, logsCmdBlk, sizeof(logsCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "log sense", res, mx_resp_len, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI LOG SELECT command. Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> Log Select not supported, |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, SG_LIB_CAT_UNIT_ATTENTION, |
| * SG_LIB_CAT_NOT_READY -> device not ready, SG_LIB_CAT_ABORTED_COMMAND, |
| * -1 -> other failure */ |
| int sg_ll_log_select(int sg_fd, int pcr, int sp, int pc, |
| int pg_code, int subpg_code, |
| unsigned char * paramp, int param_len, |
| int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char logsCmdBlk[LOG_SELECT_CMDLEN] = |
| {LOG_SELECT_CMD, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (param_len > 0xffff) { |
| fprintf(sg_warnings_strm, "log select: param_len too big\n"); |
| return -1; |
| } |
| logsCmdBlk[1] = (unsigned char)((pcr ? 2 : 0) | (sp ? 1 : 0)); |
| logsCmdBlk[2] = (unsigned char)(((pc << 6) & 0xc0) | (pg_code & 0x3f)); |
| logsCmdBlk[3] = (unsigned char)(subpg_code & 0xff); |
| logsCmdBlk[7] = (unsigned char)((param_len >> 8) & 0xff); |
| logsCmdBlk[8] = (unsigned char)(param_len & 0xff); |
| if (verbose) { |
| fprintf(sg_warnings_strm, " log select cdb: "); |
| for (k = 0; k < LOG_SELECT_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", logsCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| if ((verbose > 1) && (param_len > 0)) { |
| fprintf(sg_warnings_strm, " log select parameter list\n"); |
| dStrHex((const char *)paramp, param_len, -1); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "log select: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, logsCmdBlk, sizeof(logsCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_out(ptvp, paramp, param_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "log select", res, 0, sense_b, |
| noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI START STOP UNIT command (MMC + SBC). |
| * Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> Start stop unit not supported, |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, SG_LIB_CAT_UNIT_ATTENTION, |
| * SG_LIB_CAT_NOT_READY -> device not ready, SG_LIB_CAT_ABORTED_COMMAND, |
| * -1 -> other failure */ |
| int sg_ll_start_stop_unit(int sg_fd, int immed, int fl_num, int power_cond, |
| int fl, int loej, int start, int noisy, int verbose) |
| { |
| unsigned char ssuBlk[START_STOP_CMDLEN] = {START_STOP_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| int k, res, ret, sense_cat; |
| struct sg_pt_base * ptvp; |
| |
| ssuBlk[1] = immed & 1; |
| ssuBlk[3] = fl_num & 3; |
| ssuBlk[4] = ((power_cond & 0xf) << 4) | (fl ? 0x4 : 0) | |
| (loej ? 0x2 : 0) | (start ? 0x1 : 0); |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if (verbose) { |
| fprintf(sg_warnings_strm, " Start stop unit command:"); |
| for (k = 0; k < (int)sizeof(ssuBlk); ++k) |
| fprintf (sg_warnings_strm, " %02x", ssuBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "start stop unit: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, ssuBlk, sizeof(ssuBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| res = do_scsi_pt(ptvp, sg_fd, START_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "start stop unit", res, 0, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI PREVENT ALLOW MEDIUM REMOVAL command (SPC-3) |
| * prevent==0 allows removal, prevent==1 prevents removal ... |
| * Return of 0 -> success, |
| * SG_LIB_CAT_INVALID_OP -> command not supported |
| * SG_LIB_CAT_ILLEGAL_REQ -> bad field in cdb, SG_LIB_CAT_UNIT_ATTENTION, |
| * SG_LIB_CAT_NOT_READY -> device not ready, SG_LIB_CAT_ABORTED_COMMAND, |
| * -1 -> other failure */ |
| int sg_ll_prevent_allow(int sg_fd, int prevent, int noisy, int verbose) |
| { |
| int k, res, ret, sense_cat; |
| unsigned char pCmdBlk[PREVENT_ALLOW_CMDLEN] = |
| {PREVENT_ALLOW_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| if ((prevent < 0) || (prevent > 3)) { |
| fprintf(sg_warnings_strm, "prevent argument should be 0, 1, 2 or 3\n"); |
| return -1; |
| } |
| pCmdBlk[4] |= (prevent & 0x3); |
| if (verbose) { |
| fprintf(sg_warnings_strm, " Prevent allow medium removal cdb: "); |
| for (k = 0; k < PREVENT_ALLOW_CMDLEN; ++k) |
| fprintf(sg_warnings_strm, "%02x ", pCmdBlk[k]); |
| fprintf(sg_warnings_strm, "\n"); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| fprintf(sg_warnings_strm, "prevent allow medium removal: out of " |
| "memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, pCmdBlk, sizeof(pCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "prevent allow medium removal", res, 0, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| ret = sense_cat; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| } else |
| ret = 0; |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
