| Each utility has its own version number, date of last changes and |
| some description at the top of its ".c" file. "KG" indicates work by |
| Kurt Garloff <garloff@suse.de>. |
| |
| Changelog for sg3_utils-1.04 [20030513] |
| - all remaining utilities in the main directory have man pages [thanks |
| to Eric Schwartz <emschwar@debian.org> for 7 man pages] |
| - add CREDITS file |
| - sg_simple1, sg_simple2, sg_simple3, sg_simple4, sg_simple16 and |
| scsi_inquiry: moved to the examples directory |
| - sg_debug: moved to the archive directory |
| - sg_modes: add '-subp=<n>' for sub page code, suggests 6/10 byte |
| alternative if bad opcode sense received, flip -cpf flag to -pf, |
| add page names for most peripheral types |
| - sg_turs: default '-n=' argument to 1, only when '-n=1' print error |
| message in full |
| - sg_logs: print temperature "<not available>" for 255, '-t' switch |
| for temperature (from either temperature or IE log page) |
| - sg_dd: add '-odir=0|1' switch for O_DIRECT on block devices |
| - sg_start: add '-imm', '-loej' and 'pc=<n>' switches plus man page |
| - sg_readcap: add '-pmi' and 'lba=<n>' switches |
| - open files O_NONBLOCK in sg_inq, sg_modes and sg_logs so they |
| can be used on cd/dvd drivers when there is no disk present |
| |
| Changelog for sg3_utils-1.03 [20030402] |
| - sg_senddiag: added, allows self tests and listing of diag pages |
| - sg_start: changed to use SG_IO so works on block devices |
| - sg_err: print out some "sense key specific" data [Trent Piepho] |
| - sg_modes: add "-6" switch for force 6 byte MODE SENSE [Trent Piepho] |
| - sg_modes: more information on page codes and controls |
| - sg_inq, sg_modes, sg_logs, sg_senddiag: add man pages |
| - sg_dd: add "append=0|1" switch for glueing together large files |
| - note in README about utilities offered by scsirastools package |
| |
| Changelog for sg3_utils-1.02 [20030101] |
| - sg_inq: check if cmddt or evpd bits ignored |
| - sg_inq: warn -o=<n> not used for standard INQUIRY |
| - sg_turs: add -t option to time Test Unit Ready commands |
| - sg_errs: (used by most utilities) warn if sense buffer empty |
| - sg_modes: make safe with block SG_IO (bypass SG_GET_SCSI_ID ioctl) |
| - sg_logs: make safe with block SG_IO, self-test page work |
| - sg_dd: add "blksg_io=" switch to experiment with block SG_IO |
| - sg_read: now use SG_IO ioctl rather than sg write/read |
| - sginfo: fix writing parameters, check for block devices that answer |
| sg's ioctls, recognize "scd<n>" device names |
| - sg_map: stop close error report on tape devices |
| - sg_readcap: make safe with block SG_IO |
| - sg_start: make safe with block SG_IO |
| - sg_test_rwbuf: make safe with block SG_IO |
| |
| Changelog for sg3_utils-1.01 [20020814] |
| ---------------------------- |
| - add raw switch ("-r") to sg_inq [Martin Schwenke] |
| |
| Changelog for sg3_utils-1.00 [20020728] |
| ---------------------------- |
| - update sg_err [to SPC-3 T10/1416-D Rev 07 3 May 2002] |
| - "sg_inq -cl" now outputs opcode names |
| - add "continue on error" option to sg_dd |
| - add _LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64 defines to Makefile |
| - drop 'gen' argument from sg_dd and friends, allow any file types |
| except scsi tape device file names |
| - treat of=/dev/null as special (skip write). Accept of=. as alias |
| for of=/dev/null |
| - decode various log pages in sg_logs |
| - add 'dio' argument to sgm_dd for testing "zero copy" copies |
| |
| Changelog for sg3_utils-0.99 [20020317] |
| ---------------------------- |
| - add 'fua' and 'sync' arguments to sg_dd, sgp_dd and sgm_dd |
| - improve sg_inq, add "-cl" and "-36" arguments |
| - add sg_modes + sg_logs for MODE SENSE and LOG SENSE queries |
| - add rescan-scsi-bus.sh [KG] to archive directory |
| |
| Changelog for sg3_utils-0.98 [20020216] |
| ---------------------------- |
| - move sg_reset back from archive to main directory + build |
| - sprintf() to snprintf() changes |
| - add "time=<n>" argument to sg_dd, sgp_dd and sgm_dd to time transfer |
| - add man pages for sgm_dd and sg_read, update sg_dd and sgp_dd man pages |
| - add "cdbsz=" argument to sg_dd, sgp_dd, sgm_dd + sg_read |
| - add "gen=0|1" argument to sg_dd |
| |
| Changelog for sg3_utils-0.97 [20011223] |
| ---------------------------- |
| - move isosize to archive since introduced into util-linux-2.10s |
| |
| Changelog for sg3_utils-0.96 [20011221] |
| ---------------------------- |
| - add '-p' switch to sg_inq to provide PCI slot_name |
| - add '-n' switch to scsi_inquiry for non-blocking open |
| - new sgm_dd (dd variant) using mmap-ed IO |
| - sg_rbuf now has a '-m' argument to select mmap-ed IO |
| - sg_rbuf now has a '-t' switch to do timing + throughput calculation |
| - add sg_simple4 to demonstrate mmap-ed IO on an INQUIRY response |
| - add sg_simple16 to do a READ_16 (16 byte SCSI READ command) |
| - mmap-ed IO requires sg version 3.1.22 or later |
| - add sg_read to read multiple times starting at same offset |
| |
| Changelog for sg3_utils-0.95 [20010915] |
| ---------------------------- |
| - make sg_dd, sgp_dd and archive/sgq_dd warn if dio selected but |
| /proc/scsi/sg/allow_dio is '0' |
| - sg_map can now do any INQUIRY (when '-i' argument given) |
| - expand example in scsi_inquiry |
| |
| Changelog for sg3_utils-0.94 [20010419] |
| ---------------------------- |
| - add sg_start, documented in README.sg_start [KG] |
| - add osst suport in sg_map [KG] |
| - improvements to sginfo [KG] |
| |
| Changelog for sg3_utils-0.93 [20010415] |
| ---------------------------- |
| - more include file fine tuning |
| - some "dio" work sg_rbuf |
| - extend sgp_dd so "continue on error" works on normal files |
| - introduce sg_include.h to encapsulate sg include problems |
| - add scsi_devfs_scan |
| - add sg_bus_xfer to archive directory |
| - more error info in sginfo |
| |
| Changelog for sg3_utils-0.92 [20010116] |
| ---------------------------- |
| - change sg_err.c output from stdout to stderr |
| - change sg_debug to call system("cat /proc/scsi/sg/debug"); |
| - fix in+out totals in sg_dd and sgp_dd when partial transfers |
| - lower include dependencies in sg_err.h |
| - add sgq_dd + Makefile to archive directory |
| |
| Changelog for sg3_utils-0.91 [20001221] |
| ---------------------------- |
| - signalling handling added to sg_dd (and documented in sg_dd.8) |
| - add man page for sg_rbuf (and a small change to its code) |
| - add "-d" switch to isosize and cope with > 2 GB (and man page) |
| |
| Changelog for sg3_utils-0.90 |
| ---------------------------- |
| - switch from dated versioning. Previous version was sg3_utils001012. |
| Arbitrarily start at package version 0.90 . Start Changelog. |
| - incorporate KG's patches from Suse scsi.spm source rpm compilation: |
| - add KG's sg_test_rwbuf utility to read and write to disk buffer |
| - clean up Makefile to include a "make install" (and also add a |
| "make uninstall"). |
| - add "-uno" switch to sginfo |
| - make raw and sg devices equally acceptable to sg_dd and sgp_dd. |
| [Raw devices still not as fast as sg devices doing disk to disk |
| copies in sgp_dd but this may be improved soon. Still faster than |
| using dd!] |
| - change lseek() in sg_dd and sgp_dd to _llseek() [using code borrowed |
| from fdisk] so big disks can be properly offset with 'skip' and |
| 'seek' arguments. [This change is significant for raw devices and |
| normal files since sg devices already use 31 bit block addressing.] |
| - rename sg_s3_inq to sg_inq. This utility allows the INQUIRY response |
| to be decoded as per SCSI 3 and 4. Also can probe EVPD and CmdDt pages. |
| - change multiplier suffixes on sg_dd, sgp_dd and sg_turs so lower case |
| "k, m, g" are powers of 2 while "K, M, G" are powers of 10. This idea |
| borrowed from lmdd (lmbench suite) |
| - retire a few more less used utilities into the archive directory. |
| - add man pages for sg_dd, sgp_dd and sg_map |