src/new.rs

use std::io::{self, Result};

use ByteOrder;

/// Extends `Read` with methods for reading numbers. (For `std::io`.)
///
/// Most of the methods defined here have an unconstrained type parameter that
/// must be explicitly instantiated. Typically, it is instantiated with either
/// the `BigEndian` or `LittleEndian` types defined in this crate.
///
/// # Examples
///
/// Read unsigned 16 bit big-endian integers from a `Read`:
///
/// ```rust
/// use std::io::Cursor;
/// use byteorder::{BigEndian, ReadBytesExt};
///
/// let mut rdr = Cursor::new(vec![2, 5, 3, 0]);
/// assert_eq!(517, rdr.read_u16::<BigEndian>().unwrap());
/// assert_eq!(768, rdr.read_u16::<BigEndian>().unwrap());
/// ```
pub trait ReadBytesExt: io::Read {
    /// Reads an unsigned 8 bit integer from the underlying reader.
    ///
    /// Note that since this reads a single byte, no byte order conversions
    /// are used. It is included for completeness.
    #[inline]
    fn read_u8(&mut self) -> Result<u8> {
        let mut buf = [0; 1];
        try!(self.read_exact(&mut buf));
        Ok(buf[0])
    }

    /// Reads a signed 8 bit integer from the underlying reader.
    ///
    /// Note that since this reads a single byte, no byte order conversions
    /// are used. It is included for completeness.
    #[inline]
    fn read_i8(&mut self) -> Result<i8> {
        let mut buf = [0; 1];
        try!(self.read_exact(&mut buf));
        Ok(buf[0] as i8)
    }

    /// Reads an unsigned 16 bit integer from the underlying reader.
    #[inline]
    fn read_u16<T: ByteOrder>(&mut self) -> Result<u16> {
        let mut buf = [0; 2];
        try!(self.read_exact(&mut buf));
        Ok(T::read_u16(&buf))
    }

    /// Reads a signed 16 bit integer from the underlying reader.
    #[inline]
    fn read_i16<T: ByteOrder>(&mut self) -> Result<i16> {
        let mut buf = [0; 2];
        try!(self.read_exact(&mut buf));
        Ok(T::read_i16(&buf))
    }

    /// Reads an unsigned 32 bit integer from the underlying reader.
    #[inline]
    fn read_u32<T: ByteOrder>(&mut self) -> Result<u32> {
        let mut buf = [0; 4];
        try!(self.read_exact(&mut buf));
        Ok(T::read_u32(&buf))
    }

    /// Reads a signed 32 bit integer from the underlying reader.
    #[inline]
    fn read_i32<T: ByteOrder>(&mut self) -> Result<i32> {
        let mut buf = [0; 4];
        try!(self.read_exact(&mut buf));
        Ok(T::read_i32(&buf))
    }

    /// Reads an unsigned 64 bit integer from the underlying reader.
    #[inline]
    fn read_u64<T: ByteOrder>(&mut self) -> Result<u64> {
        let mut buf = [0; 8];
        try!(self.read_exact(&mut buf));
        Ok(T::read_u64(&buf))
    }

    /// Reads a signed 64 bit integer from the underlying reader.
    #[inline]
    fn read_i64<T: ByteOrder>(&mut self) -> Result<i64> {
        let mut buf = [0; 8];
        try!(self.read_exact(&mut buf));
        Ok(T::read_i64(&buf))
    }

    /// Reads an unsigned n-bytes integer from the underlying reader.
    #[inline]
    fn read_uint<T: ByteOrder>(&mut self, nbytes: usize) -> Result<u64> {
        let mut buf = [0; 8];
        try!(self.read_exact(&mut buf[..nbytes]));
        Ok(T::read_uint(&buf[..nbytes], nbytes))
    }

    /// Reads a signed n-bytes integer from the underlying reader.
    #[inline]
    fn read_int<T: ByteOrder>(&mut self, nbytes: usize) -> Result<i64> {
        let mut buf = [0; 8];
        try!(self.read_exact(&mut buf[..nbytes]));
        Ok(T::read_int(&buf[..nbytes], nbytes))
    }

    /// Reads a IEEE754 single-precision (4 bytes) floating point number from
    /// the underlying reader.
    #[inline]
    fn read_f32<T: ByteOrder>(&mut self) -> Result<f32> {
        let mut buf = [0; 4];
        try!(self.read_exact(&mut buf));
        Ok(T::read_f32(&buf))
    }

    /// Reads a IEEE754 double-precision (8 bytes) floating point number from
    /// the underlying reader.
    #[inline]
    fn read_f64<T: ByteOrder>(&mut self) -> Result<f64> {
        let mut buf = [0; 8];
        try!(self.read_exact(&mut buf));
        Ok(T::read_f64(&buf))
    }
}

/// All types that implement `Read` get methods defined in `ReadBytesExt`
/// for free.
impl<R: io::Read + ?Sized> ReadBytesExt for R {}

fn write_all<W: io::Write + ?Sized>(wtr: &mut W, buf: &[u8]) -> Result<()> {
    wtr.write_all(buf).map_err(From::from)
}

/// Extends `Write` with methods for writing numbers. (For `std::io`.)
///
/// Most of the methods defined here have an unconstrained type parameter that
/// must be explicitly instantiated. Typically, it is instantiated with either
/// the `BigEndian` or `LittleEndian` types defined in this crate.
///
/// # Examples
///
/// Write unsigned 16 bit big-endian integers to a `Write`:
///
/// ```rust
/// use byteorder::{BigEndian, WriteBytesExt};
///
/// let mut wtr = vec![];
/// wtr.write_u16::<BigEndian>(517).unwrap();
/// wtr.write_u16::<BigEndian>(768).unwrap();
/// assert_eq!(wtr, vec![2, 5, 3, 0]);
/// ```
pub trait WriteBytesExt: io::Write {
    /// Writes an unsigned 8 bit integer to the underlying writer.
    ///
    /// Note that since this writes a single byte, no byte order conversions
    /// are used. It is included for completeness.
    #[inline]
    fn write_u8(&mut self, n: u8) -> Result<()> {
        write_all(self, &[n])
    }

    /// Writes a signed 8 bit integer to the underlying writer.
    ///
    /// Note that since this writes a single byte, no byte order conversions
    /// are used. It is included for completeness.
    #[inline]
    fn write_i8(&mut self, n: i8) -> Result<()> {
        write_all(self, &[n as u8])
    }

    /// Writes an unsigned 16 bit integer to the underlying writer.
    #[inline]
    fn write_u16<T: ByteOrder>(&mut self, n: u16) -> Result<()> {
        let mut buf = [0; 2];
        T::write_u16(&mut buf, n);
        write_all(self, &buf)
    }

    /// Writes a signed 16 bit integer to the underlying writer.
    #[inline]
    fn write_i16<T: ByteOrder>(&mut self, n: i16) -> Result<()> {
        let mut buf = [0; 2];
        T::write_i16(&mut buf, n);
        write_all(self, &buf)
    }

    /// Writes an unsigned 32 bit integer to the underlying writer.
    #[inline]
    fn write_u32<T: ByteOrder>(&mut self, n: u32) -> Result<()> {
        let mut buf = [0; 4];
        T::write_u32(&mut buf, n);
        write_all(self, &buf)
    }

    /// Writes a signed 32 bit integer to the underlying writer.
    #[inline]
    fn write_i32<T: ByteOrder>(&mut self, n: i32) -> Result<()> {
        let mut buf = [0; 4];
        T::write_i32(&mut buf, n);
        write_all(self, &buf)
    }

    /// Writes an unsigned 64 bit integer to the underlying writer.
    #[inline]
    fn write_u64<T: ByteOrder>(&mut self, n: u64) -> Result<()> {
        let mut buf = [0; 8];
        T::write_u64(&mut buf, n);
        write_all(self, &buf)
    }

    /// Writes a signed 64 bit integer to the underlying writer.
    #[inline]
    fn write_i64<T: ByteOrder>(&mut self, n: i64) -> Result<()> {
        let mut buf = [0; 8];
        T::write_i64(&mut buf, n);
        write_all(self, &buf)
    }

    /// Writes an unsigned n-bytes integer to the underlying writer.
    ///
    /// If the given integer is not representable in the given number of bytes,
    /// this method panics. If `nbytes > 8`, this method panics.
    #[inline]
    fn write_uint<T: ByteOrder>(
        &mut self,
        n: u64,
        nbytes: usize,
    ) -> Result<()> {
        let mut buf = [0; 8];
        T::write_uint(&mut buf, n, nbytes);
        write_all(self, &buf[0..nbytes])
    }

    /// Writes a signed n-bytes integer to the underlying writer.
    ///
    /// If the given integer is not representable in the given number of bytes,
    /// this method panics. If `nbytes > 8`, this method panics.
    #[inline]
    fn write_int<T: ByteOrder>(
        &mut self,
        n: i64,
        nbytes: usize,
    ) -> Result<()> {
        let mut buf = [0; 8];
        T::write_int(&mut buf, n, nbytes);
        write_all(self, &buf[0..nbytes])
    }

    /// Writes a IEEE754 single-precision (4 bytes) floating point number to
    /// the underlying writer.
    #[inline]
    fn write_f32<T: ByteOrder>(&mut self, n: f32) -> Result<()> {
        let mut buf = [0; 4];
        T::write_f32(&mut buf, n);
        write_all(self, &buf)
    }

    /// Writes a IEEE754 double-precision (8 bytes) floating point number to
    /// the underlying writer.
    #[inline]
    fn write_f64<T: ByteOrder>(&mut self, n: f64) -> Result<()> {
        let mut buf = [0; 8];
        T::write_f64(&mut buf, n);
        write_all(self, &buf)
    }
}

/// All types that implement `Write` get methods defined in `WriteBytesExt`
/// for free.
impl<W: io::Write + ?Sized> WriteBytesExt for W {}