|  | //! Length calculations for encoded ASN.1 DER values | 
|  |  | 
|  | use crate::{Decode, DerOrd, Encode, Error, ErrorKind, Reader, Result, SliceWriter, Writer}; | 
|  | use core::{ | 
|  | cmp::Ordering, | 
|  | fmt, | 
|  | ops::{Add, Sub}, | 
|  | }; | 
|  |  | 
|  | /// Maximum number of octets in a DER encoding of a [`Length`] using the | 
|  | /// rules implemented by this crate. | 
|  | const MAX_DER_OCTETS: usize = 5; | 
|  |  | 
|  | /// Maximum length as a `u32` (256 MiB). | 
|  | const MAX_U32: u32 = 0xfff_ffff; | 
|  |  | 
|  | /// Octet identifying an indefinite length as described in X.690 Section | 
|  | /// 8.1.3.6.1: | 
|  | /// | 
|  | /// > The single octet shall have bit 8 set to one, and bits 7 to | 
|  | /// > 1 set to zero. | 
|  | const INDEFINITE_LENGTH_OCTET: u8 = 0b10000000; // 0x80 | 
|  |  | 
|  | /// ASN.1-encoded length. | 
|  | /// | 
|  | /// Maximum length is defined by the [`Length::MAX`] constant (256 MiB). | 
|  | #[derive(Copy, Clone, Debug, Default, Eq, PartialEq, PartialOrd, Ord)] | 
|  | pub struct Length(u32); | 
|  |  | 
|  | impl Length { | 
|  | /// Length of `0` | 
|  | pub const ZERO: Self = Self(0); | 
|  |  | 
|  | /// Length of `1` | 
|  | pub const ONE: Self = Self(1); | 
|  |  | 
|  | /// Maximum length currently supported: 256 MiB | 
|  | pub const MAX: Self = Self(MAX_U32); | 
|  |  | 
|  | /// Create a new [`Length`] for any value which fits inside of a [`u16`]. | 
|  | /// | 
|  | /// This function is const-safe and therefore useful for [`Length`] constants. | 
|  | pub const fn new(value: u16) -> Self { | 
|  | Self(value as u32) | 
|  | } | 
|  |  | 
|  | /// Is this length equal to zero? | 
|  | pub fn is_zero(self) -> bool { | 
|  | self == Self::ZERO | 
|  | } | 
|  |  | 
|  | /// Get the length of DER Tag-Length-Value (TLV) encoded data if `self` | 
|  | /// is the length of the inner "value" portion of the message. | 
|  | pub fn for_tlv(self) -> Result<Self> { | 
|  | Self::ONE + self.encoded_len()? + self | 
|  | } | 
|  |  | 
|  | /// Perform saturating addition of two lengths. | 
|  | pub fn saturating_add(self, rhs: Self) -> Self { | 
|  | Self(self.0.saturating_add(rhs.0)) | 
|  | } | 
|  |  | 
|  | /// Perform saturating subtraction of two lengths. | 
|  | pub fn saturating_sub(self, rhs: Self) -> Self { | 
|  | Self(self.0.saturating_sub(rhs.0)) | 
|  | } | 
|  |  | 
|  | /// Get initial octet of the encoded length (if one is required). | 
|  | /// | 
|  | /// From X.690 Section 8.1.3.5: | 
|  | /// > In the long form, the length octets shall consist of an initial octet | 
|  | /// > and one or more subsequent octets. The initial octet shall be encoded | 
|  | /// > as follows: | 
|  | /// > | 
|  | /// > a) bit 8 shall be one; | 
|  | /// > b) bits 7 to 1 shall encode the number of subsequent octets in the | 
|  | /// >    length octets, as an unsigned binary integer with bit 7 as the | 
|  | /// >    most significant bit; | 
|  | /// > c) the value 11111111₂ shall not be used. | 
|  | fn initial_octet(self) -> Option<u8> { | 
|  | match self.0 { | 
|  | 0x80..=0xFF => Some(0x81), | 
|  | 0x100..=0xFFFF => Some(0x82), | 
|  | 0x10000..=0xFFFFFF => Some(0x83), | 
|  | 0x1000000..=MAX_U32 => Some(0x84), | 
|  | _ => None, | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Add for Length { | 
|  | type Output = Result<Self>; | 
|  |  | 
|  | fn add(self, other: Self) -> Result<Self> { | 
|  | self.0 | 
|  | .checked_add(other.0) | 
|  | .ok_or_else(|| ErrorKind::Overflow.into()) | 
|  | .and_then(TryInto::try_into) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Add<u8> for Length { | 
|  | type Output = Result<Self>; | 
|  |  | 
|  | fn add(self, other: u8) -> Result<Self> { | 
|  | self + Length::from(other) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Add<u16> for Length { | 
|  | type Output = Result<Self>; | 
|  |  | 
|  | fn add(self, other: u16) -> Result<Self> { | 
|  | self + Length::from(other) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Add<u32> for Length { | 
|  | type Output = Result<Self>; | 
|  |  | 
|  | fn add(self, other: u32) -> Result<Self> { | 
|  | self + Length::try_from(other)? | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Add<usize> for Length { | 
|  | type Output = Result<Self>; | 
|  |  | 
|  | fn add(self, other: usize) -> Result<Self> { | 
|  | self + Length::try_from(other)? | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Add<Length> for Result<Length> { | 
|  | type Output = Self; | 
|  |  | 
|  | fn add(self, other: Length) -> Self { | 
|  | self? + other | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Sub for Length { | 
|  | type Output = Result<Self>; | 
|  |  | 
|  | fn sub(self, other: Length) -> Result<Self> { | 
|  | self.0 | 
|  | .checked_sub(other.0) | 
|  | .ok_or_else(|| ErrorKind::Overflow.into()) | 
|  | .and_then(TryInto::try_into) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Sub<Length> for Result<Length> { | 
|  | type Output = Self; | 
|  |  | 
|  | fn sub(self, other: Length) -> Self { | 
|  | self? - other | 
|  | } | 
|  | } | 
|  |  | 
|  | impl From<u8> for Length { | 
|  | fn from(len: u8) -> Length { | 
|  | Length(len.into()) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl From<u16> for Length { | 
|  | fn from(len: u16) -> Length { | 
|  | Length(len.into()) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl From<Length> for u32 { | 
|  | fn from(length: Length) -> u32 { | 
|  | length.0 | 
|  | } | 
|  | } | 
|  |  | 
|  | impl TryFrom<u32> for Length { | 
|  | type Error = Error; | 
|  |  | 
|  | fn try_from(len: u32) -> Result<Length> { | 
|  | if len <= Self::MAX.0 { | 
|  | Ok(Length(len)) | 
|  | } else { | 
|  | Err(ErrorKind::Overflow.into()) | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | impl TryFrom<usize> for Length { | 
|  | type Error = Error; | 
|  |  | 
|  | fn try_from(len: usize) -> Result<Length> { | 
|  | u32::try_from(len) | 
|  | .map_err(|_| ErrorKind::Overflow)? | 
|  | .try_into() | 
|  | } | 
|  | } | 
|  |  | 
|  | impl TryFrom<Length> for usize { | 
|  | type Error = Error; | 
|  |  | 
|  | fn try_from(len: Length) -> Result<usize> { | 
|  | len.0.try_into().map_err(|_| ErrorKind::Overflow.into()) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl<'a> Decode<'a> for Length { | 
|  | fn decode<R: Reader<'a>>(reader: &mut R) -> Result<Length> { | 
|  | match reader.read_byte()? { | 
|  | // Note: per X.690 Section 8.1.3.6.1 the byte 0x80 encodes indefinite | 
|  | // lengths, which are not allowed in DER, so disallow that byte. | 
|  | len if len < INDEFINITE_LENGTH_OCTET => Ok(len.into()), | 
|  | INDEFINITE_LENGTH_OCTET => Err(ErrorKind::IndefiniteLength.into()), | 
|  | // 1-4 byte variable-sized length prefix | 
|  | tag @ 0x81..=0x84 => { | 
|  | let nbytes = tag.checked_sub(0x80).ok_or(ErrorKind::Overlength)? as usize; | 
|  | debug_assert!(nbytes <= 4); | 
|  |  | 
|  | let mut decoded_len = 0u32; | 
|  | for _ in 0..nbytes { | 
|  | decoded_len = decoded_len.checked_shl(8).ok_or(ErrorKind::Overflow)? | 
|  | | u32::from(reader.read_byte()?); | 
|  | } | 
|  |  | 
|  | let length = Length::try_from(decoded_len)?; | 
|  |  | 
|  | // X.690 Section 10.1: DER lengths must be encoded with a minimum | 
|  | // number of octets | 
|  | if length.initial_octet() == Some(tag) { | 
|  | Ok(length) | 
|  | } else { | 
|  | Err(ErrorKind::Overlength.into()) | 
|  | } | 
|  | } | 
|  | _ => { | 
|  | // We specialize to a maximum 4-byte length (including initial octet) | 
|  | Err(ErrorKind::Overlength.into()) | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Encode for Length { | 
|  | fn encoded_len(&self) -> Result<Length> { | 
|  | match self.0 { | 
|  | 0..=0x7F => Ok(Length(1)), | 
|  | 0x80..=0xFF => Ok(Length(2)), | 
|  | 0x100..=0xFFFF => Ok(Length(3)), | 
|  | 0x10000..=0xFFFFFF => Ok(Length(4)), | 
|  | 0x1000000..=MAX_U32 => Ok(Length(5)), | 
|  | _ => Err(ErrorKind::Overflow.into()), | 
|  | } | 
|  | } | 
|  |  | 
|  | fn encode(&self, writer: &mut impl Writer) -> Result<()> { | 
|  | match self.initial_octet() { | 
|  | Some(tag_byte) => { | 
|  | writer.write_byte(tag_byte)?; | 
|  |  | 
|  | // Strip leading zeroes | 
|  | match self.0.to_be_bytes() { | 
|  | [0, 0, 0, byte] => writer.write_byte(byte), | 
|  | [0, 0, bytes @ ..] => writer.write(&bytes), | 
|  | [0, bytes @ ..] => writer.write(&bytes), | 
|  | bytes => writer.write(&bytes), | 
|  | } | 
|  | } | 
|  | #[allow(clippy::cast_possible_truncation)] | 
|  | None => writer.write_byte(self.0 as u8), | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | impl DerOrd for Length { | 
|  | fn der_cmp(&self, other: &Self) -> Result<Ordering> { | 
|  | let mut buf1 = [0u8; MAX_DER_OCTETS]; | 
|  | let mut buf2 = [0u8; MAX_DER_OCTETS]; | 
|  |  | 
|  | let mut encoder1 = SliceWriter::new(&mut buf1); | 
|  | encoder1.encode(self)?; | 
|  |  | 
|  | let mut encoder2 = SliceWriter::new(&mut buf2); | 
|  | encoder2.encode(other)?; | 
|  |  | 
|  | Ok(encoder1.finish()?.cmp(encoder2.finish()?)) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl fmt::Display for Length { | 
|  | fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { | 
|  | self.0.fmt(f) | 
|  | } | 
|  | } | 
|  |  | 
|  | // Implement by hand because the derive would create invalid values. | 
|  | // Generate a u32 with a valid range. | 
|  | #[cfg(feature = "arbitrary")] | 
|  | impl<'a> arbitrary::Arbitrary<'a> for Length { | 
|  | fn arbitrary(u: &mut arbitrary::Unstructured<'a>) -> arbitrary::Result<Self> { | 
|  | Ok(Self(u.int_in_range(0..=MAX_U32)?)) | 
|  | } | 
|  |  | 
|  | fn size_hint(depth: usize) -> (usize, Option<usize>) { | 
|  | u32::size_hint(depth) | 
|  | } | 
|  | } | 
|  |  | 
|  | /// Length type with support for indefinite lengths as used by ASN.1 BER, | 
|  | /// as described in X.690 Section 8.1.3.6: | 
|  | /// | 
|  | /// > 8.1.3.6 For the indefinite form, the length octets indicate that the | 
|  | /// > contents octets are terminated by end-of-contents | 
|  | /// > octets (see 8.1.5), and shall consist of a single octet. | 
|  | /// > | 
|  | /// > 8.1.3.6.1 The single octet shall have bit 8 set to one, and bits 7 to | 
|  | /// > 1 set to zero. | 
|  | /// > | 
|  | /// > 8.1.3.6.2 If this form of length is used, then end-of-contents octets | 
|  | /// > (see 8.1.5) shall be present in the encoding following the contents | 
|  | /// > octets. | 
|  | /// | 
|  | /// Indefinite lengths are non-canonical and therefore invalid DER, however | 
|  | /// there are interoperability corner cases where we have little choice but to | 
|  | /// tolerate some BER productions where this is helpful. | 
|  | #[derive(Copy, Clone, Debug, Eq, PartialEq, PartialOrd, Ord)] | 
|  | pub struct IndefiniteLength(Option<Length>); | 
|  |  | 
|  | impl IndefiniteLength { | 
|  | /// Length of `0`. | 
|  | pub const ZERO: Self = Self(Some(Length::ZERO)); | 
|  |  | 
|  | /// Length of `1`. | 
|  | pub const ONE: Self = Self(Some(Length::ONE)); | 
|  |  | 
|  | /// Indefinite length. | 
|  | pub const INDEFINITE: Self = Self(None); | 
|  | } | 
|  |  | 
|  | impl IndefiniteLength { | 
|  | /// Create a definite length from a type which can be converted into a | 
|  | /// `Length`. | 
|  | pub fn new(length: impl Into<Length>) -> Self { | 
|  | Self(Some(length.into())) | 
|  | } | 
|  |  | 
|  | /// Is this length definite? | 
|  | pub fn is_definite(self) -> bool { | 
|  | self.0.is_some() | 
|  | } | 
|  | /// Is this length indefinite? | 
|  | pub fn is_indefinite(self) -> bool { | 
|  | self.0.is_none() | 
|  | } | 
|  | } | 
|  |  | 
|  | impl<'a> Decode<'a> for IndefiniteLength { | 
|  | fn decode<R: Reader<'a>>(reader: &mut R) -> Result<IndefiniteLength> { | 
|  | if reader.peek_byte() == Some(INDEFINITE_LENGTH_OCTET) { | 
|  | // Consume the byte we already peeked at. | 
|  | let byte = reader.read_byte()?; | 
|  | debug_assert_eq!(byte, INDEFINITE_LENGTH_OCTET); | 
|  |  | 
|  | Ok(Self::INDEFINITE) | 
|  | } else { | 
|  | Length::decode(reader).map(Into::into) | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | impl Encode for IndefiniteLength { | 
|  | fn encoded_len(&self) -> Result<Length> { | 
|  | match self.0 { | 
|  | Some(length) => length.encoded_len(), | 
|  | None => Ok(Length::ONE), | 
|  | } | 
|  | } | 
|  |  | 
|  | fn encode(&self, writer: &mut impl Writer) -> Result<()> { | 
|  | match self.0 { | 
|  | Some(length) => length.encode(writer), | 
|  | None => writer.write_byte(INDEFINITE_LENGTH_OCTET), | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | impl From<Length> for IndefiniteLength { | 
|  | fn from(length: Length) -> IndefiniteLength { | 
|  | Self(Some(length)) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl From<Option<Length>> for IndefiniteLength { | 
|  | fn from(length: Option<Length>) -> IndefiniteLength { | 
|  | IndefiniteLength(length) | 
|  | } | 
|  | } | 
|  |  | 
|  | impl From<IndefiniteLength> for Option<Length> { | 
|  | fn from(length: IndefiniteLength) -> Option<Length> { | 
|  | length.0 | 
|  | } | 
|  | } | 
|  |  | 
|  | impl TryFrom<IndefiniteLength> for Length { | 
|  | type Error = Error; | 
|  |  | 
|  | fn try_from(length: IndefiniteLength) -> Result<Length> { | 
|  | length.0.ok_or_else(|| ErrorKind::IndefiniteLength.into()) | 
|  | } | 
|  | } | 
|  |  | 
|  | #[cfg(test)] | 
|  | mod tests { | 
|  | use super::{IndefiniteLength, Length}; | 
|  | use crate::{Decode, DerOrd, Encode, ErrorKind}; | 
|  | use core::cmp::Ordering; | 
|  |  | 
|  | #[test] | 
|  | fn decode() { | 
|  | assert_eq!(Length::ZERO, Length::from_der(&[0x00]).unwrap()); | 
|  |  | 
|  | assert_eq!(Length::from(0x7Fu8), Length::from_der(&[0x7F]).unwrap()); | 
|  |  | 
|  | assert_eq!( | 
|  | Length::from(0x80u8), | 
|  | Length::from_der(&[0x81, 0x80]).unwrap() | 
|  | ); | 
|  |  | 
|  | assert_eq!( | 
|  | Length::from(0xFFu8), | 
|  | Length::from_der(&[0x81, 0xFF]).unwrap() | 
|  | ); | 
|  |  | 
|  | assert_eq!( | 
|  | Length::from(0x100u16), | 
|  | Length::from_der(&[0x82, 0x01, 0x00]).unwrap() | 
|  | ); | 
|  |  | 
|  | assert_eq!( | 
|  | Length::try_from(0x10000u32).unwrap(), | 
|  | Length::from_der(&[0x83, 0x01, 0x00, 0x00]).unwrap() | 
|  | ); | 
|  | } | 
|  |  | 
|  | #[test] | 
|  | fn encode() { | 
|  | let mut buffer = [0u8; 4]; | 
|  |  | 
|  | assert_eq!(&[0x00], Length::ZERO.encode_to_slice(&mut buffer).unwrap()); | 
|  |  | 
|  | assert_eq!( | 
|  | &[0x7F], | 
|  | Length::from(0x7Fu8).encode_to_slice(&mut buffer).unwrap() | 
|  | ); | 
|  |  | 
|  | assert_eq!( | 
|  | &[0x81, 0x80], | 
|  | Length::from(0x80u8).encode_to_slice(&mut buffer).unwrap() | 
|  | ); | 
|  |  | 
|  | assert_eq!( | 
|  | &[0x81, 0xFF], | 
|  | Length::from(0xFFu8).encode_to_slice(&mut buffer).unwrap() | 
|  | ); | 
|  |  | 
|  | assert_eq!( | 
|  | &[0x82, 0x01, 0x00], | 
|  | Length::from(0x100u16).encode_to_slice(&mut buffer).unwrap() | 
|  | ); | 
|  |  | 
|  | assert_eq!( | 
|  | &[0x83, 0x01, 0x00, 0x00], | 
|  | Length::try_from(0x10000u32) | 
|  | .unwrap() | 
|  | .encode_to_slice(&mut buffer) | 
|  | .unwrap() | 
|  | ); | 
|  | } | 
|  |  | 
|  | #[test] | 
|  | fn indefinite_lengths() { | 
|  | // DER disallows indefinite lengths | 
|  | assert!(Length::from_der(&[0x80]).is_err()); | 
|  |  | 
|  | // The `IndefiniteLength` type supports them | 
|  | let indefinite_length = IndefiniteLength::from_der(&[0x80]).unwrap(); | 
|  | assert!(indefinite_length.is_indefinite()); | 
|  | assert_eq!(indefinite_length, IndefiniteLength::INDEFINITE); | 
|  |  | 
|  | // It also supports definite lengths. | 
|  | let length = IndefiniteLength::from_der(&[0x83, 0x01, 0x00, 0x00]).unwrap(); | 
|  | assert!(length.is_definite()); | 
|  | assert_eq!( | 
|  | Length::try_from(0x10000u32).unwrap(), | 
|  | length.try_into().unwrap() | 
|  | ); | 
|  | } | 
|  |  | 
|  | #[test] | 
|  | fn add_overflows_when_max_length_exceeded() { | 
|  | let result = Length::MAX + Length::ONE; | 
|  | assert_eq!( | 
|  | result.err().map(|err| err.kind()), | 
|  | Some(ErrorKind::Overflow) | 
|  | ); | 
|  | } | 
|  |  | 
|  | #[test] | 
|  | fn der_ord() { | 
|  | assert_eq!(Length::ONE.der_cmp(&Length::MAX).unwrap(), Ordering::Less); | 
|  | } | 
|  | } |