blob: 1d654cd947528e94264e2bbb4f0cd059d978f2b5 [file] [log] [blame]
* Copyright (C) 2014 Andrew Duggan
* Copyright (C) 2014 Synaptics Inc
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* See the License for the specific language governing permissions and
* limitations under the License.
#include <sys/types.h>
#include "updateutil.h"
const char *update_error_str[] = {
"success", // UPDATE_SUCCESS
"failed", // UPDATE_FAIL
"invalid firmware image", // UPDATE_FAIL_VERIFY_IMAGE
"checksum does not match image", // UPDATE_FAIL_VERIFY_CHECKSUM
"image firmware size does not match device", // UPDATE_FAIL_VERIFY_FIRMWARE_SIZE
"image config size does not match device", // UPDATE_FAIL_VERIFY_CONFIG_SIZE
"image version is unsupported", // UPDATE_FAIL_UNSUPPORTED_IMAGE_VERSION
"failed to find F01 on device", // UPDATE_FAIL_NO_FUNCTION_01
"failed to find F34 on device", // UPDATE_FAIL_NO_FUNCTION_34
"failed to query the basic properties in F01", // UPDATE_FAIL_QUERY_BASIC_PROPERTIES
"failed to read F34 query registers", // UPDATE_FAIL_READ_F34_QUERIES
"failed to read the bootloader id", // UPDATE_FAIL_READ_BOOTLOADER_ID
"failed to read F34 control registers", // UPDATE_FAIL_READ_F34_CONTROLS
"failed to write the bootloader id", // UPDATE_FAIL_WRITE_BOOTLOADER_ID
"failed to enable flash programming", // UPDATE_FAIL_ENABLE_FLASH_PROGRAMMING
"failed to reach idle state", // UPDATE_FAIL_NOT_IN_IDLE_STATE
"programming is not enabled", // UPDATE_FAIL_PROGRAMMING_NOT_ENABLED
"failed to scan the PDT", // UPDATE_FAIL_SCAN_PDT
"failed to read the device status", // UPDATE_FAIL_READ_DEVICE_STATUS
"device not in the bootloader after enabling programming", // UPDATE_FAIL_DEVICE_NOT_IN_BOOTLOADER
"failed to read F01 control 0 register", // UPDATE_FAIL_READ_F01_CONTROL_0
"failed to write F01 control 0 register", // UPDATE_FAIL_WRITE_F01_CONTROL_0
"failed to write initial zeros", // UPDATE_FAIL_WRITE_INITIAL_ZEROS
"failed to write block", // UPDATE_FAIL_WRITE_BLOCK
"failed to write the flash command", // UPDATE_FAIL_WRITE_FLASH_COMMAND
"timeout waiting for attn", // UPDATE_FAIL_TIMEOUT_WAITING_FOR_ATTN
"failed to write erase all command", // UPDATE_FAIL_ERASE_ALL
"the firmware image is older then the firmware on the device", // UPDATE_FAIL_FIRMWARE_IMAGE_IS_OLDER
"invalid parameter", // UPDATE_FAIL_INVALID_PARAMETER
"failed to open firmware image file", // UPDATE_FAIL_OPEN_FIRMWARE_IMAGE
const char * update_err_to_string(int err)
return update_error_str[err];