| /* this file is automatically generated from 'hardware-properties.ini' |
| * DO NOT EDIT IT. To re-generate it, use android/tools/gen-hw-config.py' |
| */ |
| #ifndef HWCFG_INT |
| #error HWCFG_INT not defined |
| #endif |
| #ifndef HWCFG_BOOL |
| #error HWCFG_BOOL not defined |
| #endif |
| #ifndef HWCFG_DISKSIZE |
| #error HWCFG_DISKSIZE not defined |
| #endif |
| #ifndef HWCFG_STRING |
| #error HWCFG_STRING not defined |
| #endif |
| #ifndef HWCFG_DOUBLE |
| #error HWCFG_DOUBLE not defined |
| #endif |
| |
| HWCFG_INT( |
| hw_ramSize, |
| "hw.ramSize", |
| 96, |
| "Device ram size", |
| "The amount of physical RAM on the device, in megabytes.") |
| |
| HWCFG_BOOL( |
| hw_touchScreen, |
| "hw.touchScreen", |
| "yes", |
| "Touch-screen support", |
| "Whether there is a touch screen or not on the device.") |
| |
| HWCFG_BOOL( |
| hw_trackBall, |
| "hw.trackBall", |
| "yes", |
| "Track-ball support", |
| "Whether there is a trackball on the device.") |
| |
| HWCFG_BOOL( |
| hw_keyboard, |
| "hw.keyboard", |
| "yes", |
| "Keyboard support", |
| "Whether the device has a QWERTY keyboard.") |
| |
| HWCFG_BOOL( |
| hw_dPad, |
| "hw.dPad", |
| "yes", |
| "DPad support", |
| "Whether the device has DPad keys") |
| |
| HWCFG_BOOL( |
| hw_gsmModem, |
| "hw.gsmModem", |
| "yes", |
| "GSM modem support", |
| "Whether there is a GSM modem in the device.") |
| |
| HWCFG_BOOL( |
| hw_camera, |
| "hw.camera", |
| "no", |
| "Camera support", |
| "Whether the device has a camera.") |
| |
| HWCFG_INT( |
| hw_camera_maxHorizontalPixels, |
| "hw.camera.maxHorizontalPixels", |
| 640, |
| "Maximum horizontal camera pixels", |
| "") |
| |
| HWCFG_INT( |
| hw_camera_maxVerticalPixels, |
| "hw.camera.maxVerticalPixels", |
| 480, |
| "Maximum vertical camera pixels", |
| "") |
| |
| HWCFG_BOOL( |
| hw_gps, |
| "hw.gps", |
| "yes", |
| "GPS support", |
| "Whether there is a GPS in the device.") |
| |
| HWCFG_BOOL( |
| hw_battery, |
| "hw.battery", |
| "yes", |
| "Battery support", |
| "Whether the device can run on a battery.") |
| |
| HWCFG_BOOL( |
| hw_accelerometer, |
| "hw.accelerometer", |
| "yes", |
| "Accelerometer", |
| "Whether there is an accelerometer in the device.") |
| |
| HWCFG_BOOL( |
| hw_audioInput, |
| "hw.audioInput", |
| "yes", |
| "Audio recording support", |
| "Whether the device can record audio") |
| |
| HWCFG_BOOL( |
| hw_audioOutput, |
| "hw.audioOutput", |
| "yes", |
| "Audio playback support", |
| "Whether the device can play audio") |
| |
| HWCFG_BOOL( |
| hw_sdCard, |
| "hw.sdCard", |
| "yes", |
| "SD Card support", |
| "Whether the device supports insertion/removal of virtual SD Cards.") |
| |
| HWCFG_BOOL( |
| disk_cachePartition, |
| "disk.cachePartition", |
| "yes", |
| "Cache partition support", |
| "Whether we use a /cache partition on the device.") |
| |
| HWCFG_DISKSIZE( |
| disk_cachePartition_size, |
| "disk.cachePartition.size", |
| "66MB", |
| "Cache partition size", |
| "") |
| |
| HWCFG_INT( |
| hw_lcd_density, |
| "hw.lcd.density", |
| 160, |
| "Abstracted LCD density", |
| "Must be one of 120, 160 or 240. A value used to roughly describe the density of the LCD screen for automatic resource/asset selection.") |
| |
| #undef HWCFG_INT |
| #undef HWCFG_BOOL |
| #undef HWCFG_DISKSIZE |
| #undef HWCFG_STRING |
| #undef HWCFG_DOUBLE |
| /* end of auto-generated file */ |
