| /* Copyright (C) 2007-2008 The Android Open Source Project |
| ** |
| ** This software is licensed under the terms of the GNU General Public |
| ** License version 2, as published by the Free Software Foundation, and |
| ** may be copied, distributed, and modified under those terms. |
| ** |
| ** This program is distributed in the hope that it will be useful, |
| ** but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ** GNU General Public License for more details. |
| */ |
| #include "qemu_file.h" |
| #include "goldfish_device.h" |
| #include "audio/audio.h" |
| #include "qemu_debug.h" |
| #include "android/globals.h" |
| |
| #define DEBUG 1 |
| |
| #if DEBUG |
| # define D(...) VERBOSE_PRINT(audio,__VA_ARGS__) |
| #else |
| # define D(...) ((void)0) |
| #endif |
| |
| extern void dprint(const char* fmt, ...); |
| |
| /* define USE_QEMU_AUDIO_IN to 1 to use QEMU's audio subsystem to |
| * implement the audio input. if 0, this will try to read a .wav file |
| * directly... |
| */ |
| #define USE_QEMU_AUDIO_IN 1 |
| |
| enum { |
| /* audio status register */ |
| AUDIO_INT_STATUS = 0x00, |
| /* set this to enable IRQ */ |
| AUDIO_INT_ENABLE = 0x04, |
| /* set these to specify buffer addresses */ |
| AUDIO_SET_WRITE_BUFFER_1 = 0x08, |
| AUDIO_SET_WRITE_BUFFER_2 = 0x0C, |
| /* set number of bytes in buffer to write */ |
| AUDIO_WRITE_BUFFER_1 = 0x10, |
| AUDIO_WRITE_BUFFER_2 = 0x14, |
| |
| /* true if audio input is supported */ |
| AUDIO_READ_SUPPORTED = 0x18, |
| /* buffer to use for audio input */ |
| AUDIO_SET_READ_BUFFER = 0x1C, |
| |
| /* driver writes number of bytes to read */ |
| AUDIO_START_READ = 0x20, |
| |
| /* number of bytes available in read buffer */ |
| AUDIO_READ_BUFFER_AVAILABLE = 0x24, |
| |
| /* AUDIO_INT_STATUS bits */ |
| |
| /* this bit set when it is safe to write more bytes to the buffer */ |
| AUDIO_INT_WRITE_BUFFER_1_EMPTY = 1U << 0, |
| AUDIO_INT_WRITE_BUFFER_2_EMPTY = 1U << 1, |
| AUDIO_INT_READ_BUFFER_FULL = 1U << 2, |
| }; |
| |
| |
| struct goldfish_audio_state { |
| struct goldfish_device dev; |
| // pointers to our two write buffers |
| uint32_t buffer_1, buffer_2; |
| uint32_t read_buffer; |
| // buffer flags |
| uint32_t int_status; |
| // irq enable mask for int_status |
| uint32_t int_enable; |
| |
| #if USE_QEMU_AUDIO_IN |
| uint32_t read_pos; |
| uint32_t read_size; |
| #else |
| // path to file or device to use for input |
| const char* input_source; |
| // true if input is a wav file |
| int input_is_wav; |
| // true if we need to convert stereo -> mono |
| int input_is_stereo; |
| // file descriptor to use for input |
| int input_fd; |
| #endif |
| |
| // number of bytes available in the read buffer |
| int read_buffer_available; |
| |
| // set to 1 or 2 to indicate which buffer we are writing from, or zero if both buffers are empty |
| int current_buffer; |
| |
| // current data to write |
| uint8* data_1; |
| uint32_t data_1_length; |
| uint8* data_2; |
| uint32_t data_2_length; |
| |
| |
| // for QEMU sound output |
| QEMUSoundCard card; |
| SWVoiceOut *voice; |
| #if USE_QEMU_AUDIO_IN |
| SWVoiceIn* voicein; |
| #endif |
| }; |
| |
| /* update this whenever you change the goldfish_audio_state structure */ |
| #define AUDIO_STATE_SAVE_VERSION 1 |
| |
| #define QFIELD_STRUCT struct goldfish_audio_state |
| QFIELD_BEGIN(audio_state_fields) |
| QFIELD_INT32(buffer_1), |
| QFIELD_INT32(buffer_2), |
| QFIELD_INT32(read_buffer), |
| QFIELD_INT32(int_status), |
| QFIELD_INT32(int_enable), |
| #if USE_QEMU_AUDIO_IN |
| QFIELD_INT32(read_pos), |
| QFIELD_INT32(read_size), |
| #endif |
| QFIELD_INT32(read_buffer_available), |
| QFIELD_INT32(current_buffer), |
| QFIELD_INT32(data_1_length), |
| QFIELD_INT32(data_2_length), |
| QFIELD_END |
| |
| static void audio_state_save( QEMUFile* f, void* opaque ) |
| { |
| struct goldfish_audio_state* s = opaque; |
| |
| qemu_put_struct(f, audio_state_fields, s); |
| |
| /* we can't write data_1 and data_2 directly */ |
| qemu_put_be32( f, s->data_1 - phys_ram_base ); |
| qemu_put_be32( f, s->data_2 - phys_ram_base ); |
| } |
| |
| static int audio_state_load( QEMUFile* f, void* opaque, int version_id ) |
| { |
| struct goldfish_audio_state* s = opaque; |
| int ret; |
| |
| if (version_id != AUDIO_STATE_SAVE_VERSION) |
| return -1; |
| |
| ret = qemu_get_struct(f, audio_state_fields, s); |
| if (!ret) { |
| s->data_1 = qemu_get_be32(f) + phys_ram_base; |
| s->data_2 = qemu_get_be32(f) + phys_ram_base; |
| } |
| return -1; |
| } |
| |
| static void enable_audio(struct goldfish_audio_state *s, int enable) |
| { |
| // enable or disable the output voice |
| if (s->voice != NULL) |
| AUD_set_active_out(s->voice, (enable & (AUDIO_INT_WRITE_BUFFER_1_EMPTY | AUDIO_INT_WRITE_BUFFER_2_EMPTY)) != 0); |
| |
| if (s->voicein) |
| AUD_set_active_in (s->voicein, (enable & AUDIO_INT_READ_BUFFER_FULL) != 0); |
| // reset buffer information |
| s->data_1_length = 0; |
| s->data_2_length = 0; |
| s->current_buffer = 0; |
| s->read_pos = 0; |
| } |
| |
| #if USE_QEMU_AUDIO_IN |
| static void start_read(struct goldfish_audio_state *s, uint32_t count) |
| { |
| //printf( "... goldfish audio start_read, count=%d\n", count ); |
| s->read_size = count; |
| s->read_buffer_available = 0; |
| s->read_pos = 0; |
| } |
| #else |
| static void start_read(struct goldfish_audio_state *s, uint32_t count) |
| { |
| uint8 wav_header[44]; |
| int result; |
| |
| if (!s->input_source) return; |
| |
| if (s->input_fd < 0) { |
| s->input_fd = open(s->input_source, O_BINARY | O_RDONLY); |
| |
| if (s->input_fd < 0) { |
| fprintf(stderr, "goldfish_audio could not open %s for audio input\n", s->input_source); |
| s->input_source = NULL; // set to to avoid endless retries |
| return; |
| } |
| |
| // skip WAV header if we have a WAV file |
| if (s->input_is_wav) { |
| if (read(s->input_fd, wav_header, sizeof(wav_header)) != sizeof(wav_header)) { |
| fprintf(stderr, "goldfish_audio could not read WAV file header %s\n", s->input_source); |
| s->input_fd = -1; |
| s->input_source = NULL; // set to to avoid endless retries |
| return; |
| } |
| |
| // is the WAV file stereo? |
| s->input_is_stereo = (wav_header[22] == 2); |
| } else { |
| // assume input from an audio device is stereo |
| s->input_is_stereo = 1; |
| } |
| } |
| |
| uint8* buffer = (uint8*)phys_ram_base + s->read_buffer; |
| if (s->input_is_stereo) { |
| // need to read twice as much data |
| count *= 2; |
| } |
| |
| try_again: |
| result = read(s->input_fd, buffer, count); |
| if (result == 0 && s->input_is_wav) { |
| // end of file, so seek back to the beginning |
| lseek(s->input_fd, sizeof(wav_header), SEEK_SET); |
| goto try_again; |
| } |
| |
| if (result > 0 && s->input_is_stereo) { |
| // we need to convert stereo to mono |
| uint8* src = (uint8*)buffer; |
| uint8* dest = src; |
| int count = result/2; |
| while (count-- > 0) { |
| int sample1 = src[0] | (src[1] << 8); |
| int sample2 = src[2] | (src[3] << 8); |
| int sample = (sample1 + sample2) >> 1; |
| dst[0] = (uint8_t) sample; |
| dst[1] = (uint8_t)(sample >> 8); |
| src += 4; |
| dst += 2; |
| } |
| |
| // we reduced the number of bytes by 2 |
| result /= 2; |
| } |
| |
| s->read_buffer_available = (result > 0 ? result : 0); |
| s->int_status |= AUDIO_INT_READ_BUFFER_FULL; |
| goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable)); |
| } |
| #endif |
| |
| static uint32_t goldfish_audio_read(void *opaque, target_phys_addr_t offset) |
| { |
| uint32_t ret; |
| struct goldfish_audio_state *s = opaque; |
| offset -= s->dev.base; |
| switch(offset) { |
| case AUDIO_INT_STATUS: |
| // return current buffer status flags |
| ret = s->int_status & s->int_enable; |
| if(ret) { |
| goldfish_device_set_irq(&s->dev, 0, 0); |
| } |
| return ret; |
| |
| case AUDIO_READ_SUPPORTED: |
| #if USE_QEMU_AUDIO_IN |
| D("%s: AUDIO_READ_SUPPORTED returns %d", __FUNCTION__, |
| (s->voicein != NULL)); |
| return (s->voicein != NULL); |
| #else |
| return (s->input_source ? 1 : 0); |
| #endif |
| |
| case AUDIO_READ_BUFFER_AVAILABLE: |
| D("%s: AUDIO_READ_BUFFER_AVAILABLE returns %d", __FUNCTION__, |
| s->read_buffer_available); |
| return s->read_buffer_available; |
| |
| default: |
| cpu_abort (cpu_single_env, "goldfish_audio_read: Bad offset %x\n", offset); |
| return 0; |
| } |
| } |
| |
| static void goldfish_audio_write(void *opaque, target_phys_addr_t offset, uint32_t val) |
| { |
| struct goldfish_audio_state *s = opaque; |
| offset -= s->dev.base; |
| |
| switch(offset) { |
| case AUDIO_INT_ENABLE: |
| /* enable buffer empty interrupts */ |
| D("%s: AUDIO_INT_ENABLE %d", __FUNCTION__, val ); |
| enable_audio(s, val); |
| s->int_enable = val; |
| s->int_status = (AUDIO_INT_WRITE_BUFFER_1_EMPTY | AUDIO_INT_WRITE_BUFFER_2_EMPTY); |
| goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable)); |
| break; |
| case AUDIO_SET_WRITE_BUFFER_1: |
| /* save pointer to buffer 1 */ |
| s->buffer_1 = val; |
| break; |
| case AUDIO_SET_WRITE_BUFFER_2: |
| /* save pointer to buffer 2 */ |
| s->buffer_2 = val; |
| break; |
| case AUDIO_WRITE_BUFFER_1: |
| /* record that data in buffer 1 is ready to write */ |
| if (s->current_buffer == 0) s->current_buffer = 1; |
| s->data_1 = phys_ram_base + s->buffer_1; |
| s->data_1_length = val; |
| s->int_status &= ~AUDIO_INT_WRITE_BUFFER_1_EMPTY; |
| break; |
| case AUDIO_WRITE_BUFFER_2: |
| /* record that data in buffer 2 is ready to write */ |
| if (s->current_buffer == 0) s->current_buffer = 2; |
| s->data_2 = phys_ram_base + s->buffer_2; |
| s->data_2_length = val; |
| s->int_status &= ~AUDIO_INT_WRITE_BUFFER_2_EMPTY; |
| break; |
| |
| case AUDIO_SET_READ_BUFFER: |
| /* save pointer to the read buffer */ |
| s->read_buffer = val; |
| D( "%s: AUDIO_SET_READ_BUFFER %p", __FUNCTION__, (void*)val ); |
| break; |
| |
| case AUDIO_START_READ: |
| D( "%s: AUDIO_START_READ %d", __FUNCTION__, val ); |
| start_read(s, val); |
| s->int_status &= ~AUDIO_INT_READ_BUFFER_FULL; |
| goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable)); |
| break; |
| |
| default: |
| cpu_abort (cpu_single_env, "goldfish_audio_write: Bad offset %x\n", offset); |
| } |
| } |
| |
| static void goldfish_audio_callback(void *opaque, int free) |
| { |
| struct goldfish_audio_state *s = opaque; |
| int new_status = 0; |
| |
| /* loop until free is zero or both buffers are empty */ |
| while (free && s->current_buffer) { |
| |
| /* write data in buffer 1 */ |
| while (free && s->current_buffer == 1) { |
| int write = s->data_1_length; |
| if (write > free) write = free; |
| |
| int written = AUD_write(s->voice, s->data_1, write); |
| if (written) { |
| D("%s: sent %d bytes to audio output", __FUNCTION__, write); |
| s->data_1 += written; |
| s->data_1_length -= written; |
| free -= written; |
| |
| if (s->data_1_length == 0) { |
| new_status |= AUDIO_INT_WRITE_BUFFER_1_EMPTY; |
| s->current_buffer = (s->data_2_length ? 2 : 0); |
| } |
| } else { |
| break; |
| } |
| } |
| |
| /* write data in buffer 2 */ |
| while (free && s->current_buffer == 2) { |
| int write = s->data_2_length; |
| if (write > free) write = free; |
| |
| int written = AUD_write(s->voice, s->data_2, write); |
| if (written) { |
| D("%s: sent %d bytes to audio output", __FUNCTION__, write); |
| s->data_2 += written; |
| s->data_2_length -= written; |
| free -= written; |
| |
| if (s->data_2_length == 0) { |
| new_status |= AUDIO_INT_WRITE_BUFFER_2_EMPTY; |
| s->current_buffer = (s->data_1_length ? 1 : 0); |
| } |
| } else { |
| break; |
| } |
| } |
| } |
| |
| if (new_status && new_status != s->int_status) { |
| s->int_status |= new_status; |
| goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable)); |
| } |
| } |
| |
| #if USE_QEMU_AUDIO_IN |
| static void |
| goldfish_audio_in_callback(void *opaque, int avail) |
| { |
| struct goldfish_audio_state *s = opaque; |
| int new_status = 0; |
| |
| if (s->read_pos >= s->read_size) |
| return; |
| |
| if (0 && s->read_size > 0) |
| D("%s: in %d (pos=%d size=%d)", __FUNCTION__, |
| avail, s->read_pos, s->read_size ); |
| |
| while (avail > 0) { |
| int pos = s->read_pos; |
| int missing = s->read_size - pos; |
| uint8* buffer = (uint8*)phys_ram_base + s->read_buffer + pos; |
| int read; |
| int avail2 = (avail > missing) ? missing : avail; |
| |
| read = AUD_read(s->voicein, buffer, avail2); |
| if (read == 0) |
| break; |
| |
| if (avail2 > 0) |
| D("%s: AUD_read(%d) returned %d", __FUNCTION__, avail2, read); |
| |
| s->read_buffer_available += read; |
| |
| avail -= read; |
| pos += read; |
| if (pos == s->read_size) { |
| new_status |= AUDIO_INT_READ_BUFFER_FULL; |
| D("%s: AUDIO_INT_READ_BUFFER_FULL available=%d", __FUNCTION__, s->read_buffer_available); |
| } |
| s->read_pos = pos; |
| } |
| |
| if (new_status && new_status != s->int_status) { |
| s->int_status |= new_status; |
| goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable)); |
| } |
| } |
| #endif /* USE_QEMU_AUDIO_IN */ |
| |
| static CPUReadMemoryFunc *goldfish_audio_readfn[] = { |
| goldfish_audio_read, |
| goldfish_audio_read, |
| goldfish_audio_read |
| }; |
| |
| static CPUWriteMemoryFunc *goldfish_audio_writefn[] = { |
| goldfish_audio_write, |
| goldfish_audio_write, |
| goldfish_audio_write |
| }; |
| |
| void goldfish_audio_init(uint32_t base, int id, const char* input_source) |
| { |
| struct goldfish_audio_state *s; |
| audsettings_t as; |
| |
| /* nothing to do if no audio input and output */ |
| if (!android_hw->hw_audioOutput && !android_hw->hw_audioInput) |
| return; |
| |
| s = (struct goldfish_audio_state *)qemu_mallocz(sizeof(*s)); |
| s->dev.name = "goldfish_audio"; |
| s->dev.id = id; |
| s->dev.base = base; |
| s->dev.size = 0x1000; |
| s->dev.irq_count = 1; |
| |
| #ifndef USE_QEMU_AUDIO_IN |
| s->input_fd = -1; |
| if (input_source) { |
| s->input_source = input_source; |
| char* extension = strrchr(input_source, '.'); |
| if (extension && strcasecmp(extension, ".wav") == 0) { |
| s->input_is_wav = 1; |
| } |
| } |
| #endif |
| |
| AUD_register_card( &glob_audio_state, "goldfish_audio", &s->card); |
| |
| as.freq = 44100; |
| as.nchannels = 2; |
| as.fmt = AUD_FMT_S16; |
| as.endianness = AUDIO_HOST_ENDIANNESS; |
| |
| if (android_hw->hw_audioOutput) { |
| s->voice = AUD_open_out ( |
| &s->card, |
| s->voice, |
| "goldfish_audio", |
| s, |
| goldfish_audio_callback, |
| &as |
| ); |
| if (!s->voice) { |
| dprint("warning: opening audio output failed\n"); |
| return; |
| } |
| } |
| |
| #if USE_QEMU_AUDIO_IN |
| as.freq = 8000; |
| as.nchannels = 1; |
| as.fmt = AUD_FMT_S16; |
| as.endianness = AUDIO_HOST_ENDIANNESS; |
| |
| if (android_hw->hw_audioInput) { |
| s->voicein = AUD_open_in ( |
| &s->card, |
| NULL, |
| "goldfish_audio_in", |
| s, |
| goldfish_audio_in_callback, |
| &as |
| ); |
| if (!s->voicein) { |
| dprint("warning: opening audio input failed\n"); |
| } |
| } |
| #endif |
| |
| goldfish_device_add(&s->dev, goldfish_audio_readfn, goldfish_audio_writefn, s); |
| |
| register_savevm( "audio_state", 0, AUDIO_STATE_SAVE_VERSION, |
| audio_state_save, audio_state_load, s ); |
| } |
| |