| # Welcome to the PyTorch setup.py. |
| # |
| # Environment variables you are probably interested in: |
| # |
| # DEBUG |
| # build with -O0 and -g (debug symbols) |
| # |
| # REL_WITH_DEB_INFO |
| # build with optimizations and -g (debug symbols) |
| # |
| # MAX_JOBS |
| # maximum number of compile jobs we should use to compile your code |
| # |
| # USE_CUDA=0 |
| # disables CUDA build |
| # |
| # CFLAGS |
| # flags to apply to both C and C++ files to be compiled (a quirk of setup.py |
| # which we have faithfully adhered to in our build system is that CFLAGS |
| # also applies to C++ files (unless CXXFLAGS is set), in contrast to the |
| # default behavior of autogoo and cmake build systems.) |
| # |
| # CC |
| # the C/C++ compiler to use (NB: the CXX flag has no effect for distutils |
| # compiles, because distutils always uses CC to compile, even for C++ |
| # files. |
| # |
| # Environment variables for feature toggles: |
| # |
| # USE_CUDNN=0 |
| # disables the cuDNN build |
| # |
| # USE_FBGEMM=0 |
| # disables the FBGEMM build |
| # |
| # USE_NUMPY=0 |
| # disables the NumPy build |
| # |
| # BUILD_TEST=0 |
| # disables the test build |
| # |
| # USE_MKLDNN=0 |
| # disables use of MKLDNN |
| # |
| # MKLDNN_CPU_RUNTIME |
| # MKL-DNN threading mode: TBB or OMP (default) |
| # |
| # USE_NNPACK=0 |
| # disables NNPACK build |
| # |
| # USE_QNNPACK=0 |
| # disables QNNPACK build (quantized 8-bit operators) |
| # |
| # USE_DISTRIBUTED=0 |
| # disables distributed (c10d, gloo, mpi, etc.) build |
| # |
| # USE_SYSTEM_NCCL=0 |
| # disables use of system-wide nccl (we will use our submoduled |
| # copy in third_party/nccl) |
| # |
| # BUILD_CAFFE2_OPS=0 |
| # disable Caffe2 operators build |
| # |
| # USE_IBVERBS |
| # toggle features related to distributed support |
| # |
| # USE_OPENCV |
| # enables use of OpenCV for additional operators |
| # |
| # USE_OPENMP=0 |
| # disables use of OpenMP for parallelization |
| # |
| # USE_FFMPEG |
| # enables use of ffmpeg for additional operators |
| # |
| # USE_LEVELDB |
| # enables use of LevelDB for storage |
| # |
| # USE_LMDB |
| # enables use of LMDB for storage |
| # |
| # BUILD_BINARY |
| # enables the additional binaries/ build |
| # |
| # PYTORCH_BUILD_VERSION |
| # PYTORCH_BUILD_NUMBER |
| # specify the version of PyTorch, rather than the hard-coded version |
| # in this file; used when we're building binaries for distribution |
| # |
| # TORCH_CUDA_ARCH_LIST |
| # specify which CUDA architectures to build for. |
| # ie `TORCH_CUDA_ARCH_LIST="6.0;7.0"` |
| # These are not CUDA versions, instead, they specify what |
| # classes of NVIDIA hardware we should generate PTX for. |
| # |
| # ONNX_NAMESPACE |
| # specify a namespace for ONNX built here rather than the hard-coded |
| # one in this file; needed to build with other frameworks that share ONNX. |
| # |
| # BLAS |
| # BLAS to be used by Caffe2. Can be MKL, Eigen, ATLAS, or OpenBLAS. If set |
| # then the build will fail if the requested BLAS is not found, otherwise |
| # the BLAS will be chosen based on what is found on your system. |
| # |
| # MKL_THREADING |
| # MKL threading mode: SEQ, TBB or OMP (default) |
| # |
| # USE_REDIS |
| # Whether to use Redis for distributed workflows (Linux only) |
| # |
| # USE_ZSTD |
| # Enables use of ZSTD, if the libraries are found |
| # |
| # Environment variables we respect (these environment variables are |
| # conventional and are often understood/set by other software.) |
| # |
| # CUDA_HOME (Linux/OS X) |
| # CUDA_PATH (Windows) |
| # specify where CUDA is installed; usually /usr/local/cuda or |
| # /usr/local/cuda-x.y |
| # CUDAHOSTCXX |
| # specify a different compiler than the system one to use as the CUDA |
| # host compiler for nvcc. |
| # |
| # CUDA_NVCC_EXECUTABLE |
| # Specify a NVCC to use. This is used in our CI to point to a cached nvcc |
| # |
| # CUDNN_LIB_DIR |
| # CUDNN_INCLUDE_DIR |
| # CUDNN_LIBRARY |
| # specify where cuDNN is installed |
| # |
| # MIOPEN_LIB_DIR |
| # MIOPEN_INCLUDE_DIR |
| # MIOPEN_LIBRARY |
| # specify where MIOpen is installed |
| # |
| # NCCL_ROOT |
| # NCCL_LIB_DIR |
| # NCCL_INCLUDE_DIR |
| # specify where nccl is installed |
| # |
| # NVTOOLSEXT_PATH (Windows only) |
| # specify where nvtoolsext is installed |
| # |
| # LIBRARY_PATH |
| # LD_LIBRARY_PATH |
| # we will search for libraries in these paths |
| # |
| # ATEN_THREADING |
| # ATen parallel backend to use for intra- and inter-op parallelism |
| # possible values: |
| # OMP - use OpenMP for intra-op and native backend for inter-op tasks |
| # NATIVE - use native thread pool for both intra- and inter-op tasks |
| # TBB - using TBB for intra- and native thread pool for inter-op parallelism |
| # |
| # USE_TBB |
| # enable TBB support |
| # |
| # USE_SYSTEM_LIBS (work in progress) |
| # Use system-provided libraries to satisfy the build dependencies. |
| # When turned on, the following cmake variables will be toggled as well: |
| # USE_SYSTEM_CPUINFO=ON USE_SYSTEM_SLEEF=ON BUILD_CUSTOM_PROTOBUF=OFF |
| |
| from __future__ import print_function |
| |
| import sys |
| if sys.version_info < (3,): |
| raise Exception("Python 2 has reached end-of-life and is no longer supported by PyTorch.") |
| |
| from setuptools import setup, Extension, distutils, find_packages |
| from collections import defaultdict |
| from distutils import core |
| from distutils.core import Distribution |
| from distutils.errors import DistutilsArgError |
| import setuptools.command.build_ext |
| import setuptools.command.install |
| import distutils.command.clean |
| import distutils.sysconfig |
| import filecmp |
| import subprocess |
| import shutil |
| import os |
| import json |
| import glob |
| import importlib |
| |
| from tools.build_pytorch_libs import build_caffe2 |
| from tools.setup_helpers.env import (IS_WINDOWS, IS_DARWIN, IS_LINUX, |
| check_env_flag, build_type) |
| from tools.setup_helpers.cmake import CMake |
| |
| try: |
| FileNotFoundError |
| except NameError: |
| FileNotFoundError = IOError # Python 2.7 does not have FileNotFoundError |
| |
| ################################################################################ |
| # Parameters parsed from environment |
| ################################################################################ |
| |
| VERBOSE_SCRIPT = True |
| RUN_BUILD_DEPS = True |
| # see if the user passed a quiet flag to setup.py arguments and respect |
| # that in our parts of the build |
| EMIT_BUILD_WARNING = False |
| RERUN_CMAKE = False |
| CMAKE_ONLY = False |
| filtered_args = [] |
| for i, arg in enumerate(sys.argv): |
| if arg == '--cmake': |
| RERUN_CMAKE = True |
| continue |
| if arg == '--cmake-only': |
| # Stop once cmake terminates. Leave users a chance to adjust build |
| # options. |
| CMAKE_ONLY = True |
| continue |
| if arg == 'rebuild' or arg == 'build': |
| arg = 'build' # rebuild is gone, make it build |
| EMIT_BUILD_WARNING = True |
| if arg == "--": |
| filtered_args += sys.argv[i:] |
| break |
| if arg == '-q' or arg == '--quiet': |
| VERBOSE_SCRIPT = False |
| if arg == 'clean' or arg == 'egg_info': |
| RUN_BUILD_DEPS = False |
| filtered_args.append(arg) |
| sys.argv = filtered_args |
| |
| if VERBOSE_SCRIPT: |
| def report(*args): |
| print(*args) |
| else: |
| def report(*args): |
| pass |
| |
| # Constant known variables used throughout this file |
| cwd = os.path.dirname(os.path.abspath(__file__)) |
| lib_path = os.path.join(cwd, "torch", "lib") |
| third_party_path = os.path.join(cwd, "third_party") |
| caffe2_build_dir = os.path.join(cwd, "build") |
| # lib/pythonx.x/site-packages |
| rel_site_packages = distutils.sysconfig.get_python_lib(prefix='') |
| # full absolute path to the dir above |
| full_site_packages = distutils.sysconfig.get_python_lib() |
| # CMAKE: full path to python library |
| if IS_WINDOWS: |
| cmake_python_library = "{}/libs/python{}.lib".format( |
| distutils.sysconfig.get_config_var("prefix"), |
| distutils.sysconfig.get_config_var("VERSION")) |
| # Fix virtualenv builds |
| # TODO: Fix for python < 3.3 |
| if not os.path.exists(cmake_python_library): |
| cmake_python_library = "{}/libs/python{}.lib".format( |
| sys.base_prefix, |
| distutils.sysconfig.get_config_var("VERSION")) |
| else: |
| cmake_python_library = "{}/{}".format( |
| distutils.sysconfig.get_config_var("LIBDIR"), |
| distutils.sysconfig.get_config_var("INSTSONAME")) |
| cmake_python_include_dir = distutils.sysconfig.get_python_inc() |
| |
| |
| ################################################################################ |
| # Version, create_version_file, and package_name |
| ################################################################################ |
| package_name = os.getenv('TORCH_PACKAGE_NAME', 'torch') |
| version = open('version.txt', 'r').read().strip() |
| sha = 'Unknown' |
| |
| try: |
| sha = subprocess.check_output(['git', 'rev-parse', 'HEAD'], cwd=cwd).decode('ascii').strip() |
| except Exception: |
| pass |
| |
| if os.getenv('PYTORCH_BUILD_VERSION'): |
| assert os.getenv('PYTORCH_BUILD_NUMBER') is not None |
| build_number = int(os.getenv('PYTORCH_BUILD_NUMBER')) |
| version = os.getenv('PYTORCH_BUILD_VERSION') |
| if build_number > 1: |
| version += '.post' + str(build_number) |
| elif sha != 'Unknown': |
| version += '+' + sha[:7] |
| report("Building wheel {}-{}".format(package_name, version)) |
| |
| cmake = CMake() |
| |
| # all the work we need to do _before_ setup runs |
| def build_deps(): |
| report('-- Building version ' + version) |
| |
| def check_file(f): |
| if bool(os.getenv("USE_SYSTEM_LIBS", False)): |
| return |
| if not os.path.exists(f): |
| report("Could not find {}".format(f)) |
| report("Did you run 'git submodule update --init --recursive'?") |
| sys.exit(1) |
| |
| check_file(os.path.join(third_party_path, "gloo", "CMakeLists.txt")) |
| check_file(os.path.join(third_party_path, "pybind11", "CMakeLists.txt")) |
| check_file(os.path.join(third_party_path, 'cpuinfo', 'CMakeLists.txt')) |
| check_file(os.path.join(third_party_path, 'tbb', 'Makefile')) |
| check_file(os.path.join(third_party_path, 'onnx', 'CMakeLists.txt')) |
| check_file(os.path.join(third_party_path, 'foxi', 'CMakeLists.txt')) |
| check_file(os.path.join(third_party_path, 'QNNPACK', 'CMakeLists.txt')) |
| check_file(os.path.join(third_party_path, 'fbgemm', 'CMakeLists.txt')) |
| check_file(os.path.join(third_party_path, 'fbgemm', 'third_party', |
| 'asmjit', 'CMakeLists.txt')) |
| check_file(os.path.join(third_party_path, 'onnx', 'third_party', |
| 'benchmark', 'CMakeLists.txt')) |
| |
| check_pydep('yaml', 'pyyaml') |
| check_pydep('typing', 'typing') |
| |
| build_caffe2(version=version, |
| cmake_python_library=cmake_python_library, |
| build_python=True, |
| rerun_cmake=RERUN_CMAKE, |
| cmake_only=CMAKE_ONLY, |
| cmake=cmake) |
| |
| version_path = os.path.join(cwd, 'torch', 'version.py') |
| with open(version_path, 'w') as f: |
| f.write("__version__ = '{}'\n".format(version)) |
| # NB: This is not 100% accurate, because you could have built the |
| # library code with DEBUG, but csrc without DEBUG (in which case |
| # this would claim to be a release build when it's not.) |
| f.write("debug = {}\n".format(repr(build_type.is_debug()))) |
| cmake_cache_vars = defaultdict(lambda: None, cmake.get_cmake_cache_variables()) |
| f.write("cuda = {}\n".format(repr(cmake_cache_vars['CUDA_VERSION']))) |
| f.write("git_version = {}\n".format(repr(sha))) |
| f.write("hip = {}\n".format(repr(cmake_cache_vars['HIP_VERSION']))) |
| |
| if CMAKE_ONLY: |
| report('Finished running cmake. Run "ccmake build" or ' |
| '"cmake-gui build" to adjust build options and ' |
| '"python setup.py install" to build.') |
| sys.exit() |
| |
| # Use copies instead of symbolic files. |
| # Windows has very poor support for them. |
| sym_files = ['tools/shared/cwrap_common.py', 'tools/shared/_utils_internal.py'] |
| orig_files = ['aten/src/ATen/common_with_cwrap.py', 'torch/_utils_internal.py'] |
| for sym_file, orig_file in zip(sym_files, orig_files): |
| same = False |
| if os.path.exists(sym_file): |
| if filecmp.cmp(sym_file, orig_file): |
| same = True |
| else: |
| os.remove(sym_file) |
| if not same: |
| shutil.copyfile(orig_file, sym_file) |
| |
| ################################################################################ |
| # Building dependent libraries |
| ################################################################################ |
| |
| # the list of runtime dependencies required by this built package |
| install_requires = ['future'] |
| |
| missing_pydep = ''' |
| Missing build dependency: Unable to `import {importname}`. |
| Please install it via `conda install {module}` or `pip install {module}` |
| '''.strip() |
| |
| |
| def check_pydep(importname, module): |
| try: |
| importlib.import_module(importname) |
| except ImportError: |
| raise RuntimeError(missing_pydep.format(importname=importname, module=module)) |
| |
| |
| class build_ext(setuptools.command.build_ext.build_ext): |
| def run(self): |
| # Report build options. This is run after the build completes so # `CMakeCache.txt` exists and we can get an |
| # accurate report on what is used and what is not. |
| cmake_cache_vars = defaultdict(lambda: False, cmake.get_cmake_cache_variables()) |
| if cmake_cache_vars['USE_NUMPY']: |
| report('-- Building with NumPy bindings') |
| else: |
| report('-- NumPy not found') |
| if cmake_cache_vars['USE_CUDNN']: |
| report('-- Detected cuDNN at ' + |
| cmake_cache_vars['CUDNN_LIBRARY'] + ', ' + cmake_cache_vars['CUDNN_INCLUDE_DIR']) |
| else: |
| report('-- Not using cuDNN') |
| if cmake_cache_vars['USE_CUDA']: |
| report('-- Detected CUDA at ' + cmake_cache_vars['CUDA_TOOLKIT_ROOT_DIR']) |
| else: |
| report('-- Not using CUDA') |
| if cmake_cache_vars['USE_MKLDNN']: |
| report('-- Using MKLDNN') |
| if cmake_cache_vars['USE_MKLDNN_CBLAS']: |
| report('-- Using CBLAS in MKLDNN') |
| else: |
| report('-- Not using CBLAS in MKLDNN') |
| else: |
| report('-- Not using MKLDNN') |
| if cmake_cache_vars['USE_NCCL'] and cmake_cache_vars['USE_SYSTEM_NCCL']: |
| report('-- Using system provided NCCL library at {}, {}'.format(cmake_cache_vars['NCCL_LIBRARIES'], |
| cmake_cache_vars['NCCL_INCLUDE_DIRS'])) |
| elif cmake_cache_vars['USE_NCCL']: |
| report('-- Building NCCL library') |
| else: |
| report('-- Not using NCCL') |
| if cmake_cache_vars['USE_DISTRIBUTED']: |
| if IS_WINDOWS: |
| report('-- Building without distributed package') |
| else: |
| report('-- Building with distributed package ') |
| else: |
| report('-- Building without distributed package') |
| |
| # Do not use clang to compile exensions if `-fstack-clash-protection` is defined |
| # in system CFLAGS |
| system_c_flags = distutils.sysconfig.get_config_var('CFLAGS') |
| if IS_LINUX and '-fstack-clash-protection' in system_c_flags and 'clang' in os.environ.get('CC', ''): |
| os.environ['CC'] = distutils.sysconfig.get_config_var('CC') |
| |
| # It's an old-style class in Python 2.7... |
| setuptools.command.build_ext.build_ext.run(self) |
| |
| # Copy the essential export library to compile C++ extensions. |
| if IS_WINDOWS: |
| build_temp = self.build_temp |
| |
| ext_filename = self.get_ext_filename('_C') |
| lib_filename = '.'.join(ext_filename.split('.')[:-1]) + '.lib' |
| |
| export_lib = os.path.join( |
| build_temp, 'torch', 'csrc', lib_filename).replace('\\', '/') |
| |
| build_lib = self.build_lib |
| |
| target_lib = os.path.join( |
| build_lib, 'torch', 'lib', '_C.lib').replace('\\', '/') |
| |
| # Create "torch/lib" directory if not exists. |
| # (It is not created yet in "develop" mode.) |
| target_dir = os.path.dirname(target_lib) |
| if not os.path.exists(target_dir): |
| os.makedirs(target_dir) |
| |
| self.copy_file(export_lib, target_lib) |
| |
| def build_extensions(self): |
| self.create_compile_commands() |
| # The caffe2 extensions are created in |
| # tmp_install/lib/pythonM.m/site-packages/caffe2/python/ |
| # and need to be copied to build/lib.linux.... , which will be a |
| # platform dependent build folder created by the "build" command of |
| # setuptools. Only the contents of this folder are installed in the |
| # "install" command by default. |
| # We only make this copy for Caffe2's pybind extensions |
| caffe2_pybind_exts = [ |
| 'caffe2.python.caffe2_pybind11_state', |
| 'caffe2.python.caffe2_pybind11_state_gpu', |
| 'caffe2.python.caffe2_pybind11_state_hip', |
| ] |
| i = 0 |
| while i < len(self.extensions): |
| ext = self.extensions[i] |
| if ext.name not in caffe2_pybind_exts: |
| i += 1 |
| continue |
| fullname = self.get_ext_fullname(ext.name) |
| filename = self.get_ext_filename(fullname) |
| report("\nCopying extension {}".format(ext.name)) |
| |
| src = os.path.join("torch", rel_site_packages, filename) |
| if not os.path.exists(src): |
| report("{} does not exist".format(src)) |
| del self.extensions[i] |
| else: |
| dst = os.path.join(os.path.realpath(self.build_lib), filename) |
| report("Copying {} from {} to {}".format(ext.name, src, dst)) |
| dst_dir = os.path.dirname(dst) |
| if not os.path.exists(dst_dir): |
| os.makedirs(dst_dir) |
| self.copy_file(src, dst) |
| i += 1 |
| distutils.command.build_ext.build_ext.build_extensions(self) |
| |
| def get_outputs(self): |
| outputs = distutils.command.build_ext.build_ext.get_outputs(self) |
| outputs.append(os.path.join(self.build_lib, "caffe2")) |
| report("setup.py::get_outputs returning {}".format(outputs)) |
| return outputs |
| |
| def create_compile_commands(self): |
| def load(filename): |
| with open(filename) as f: |
| return json.load(f) |
| ninja_files = glob.glob('build/*compile_commands.json') |
| cmake_files = glob.glob('torch/lib/build/*/compile_commands.json') |
| all_commands = [entry |
| for f in ninja_files + cmake_files |
| for entry in load(f)] |
| |
| # cquery does not like c++ compiles that start with gcc. |
| # It forgets to include the c++ header directories. |
| # We can work around this by replacing the gcc calls that python |
| # setup.py generates with g++ calls instead |
| for command in all_commands: |
| if command['command'].startswith("gcc "): |
| command['command'] = "g++ " + command['command'][4:] |
| |
| new_contents = json.dumps(all_commands, indent=2) |
| contents = '' |
| if os.path.exists('compile_commands.json'): |
| with open('compile_commands.json', 'r') as f: |
| contents = f.read() |
| if contents != new_contents: |
| with open('compile_commands.json', 'w') as f: |
| f.write(new_contents) |
| |
| |
| class install(setuptools.command.install.install): |
| def run(self): |
| setuptools.command.install.install.run(self) |
| |
| |
| class clean(distutils.command.clean.clean): |
| def run(self): |
| import glob |
| import re |
| with open('.gitignore', 'r') as f: |
| ignores = f.read() |
| pat = re.compile(r'^#( BEGIN NOT-CLEAN-FILES )?') |
| for wildcard in filter(None, ignores.split('\n')): |
| match = pat.match(wildcard) |
| if match: |
| if match.group(1): |
| # Marker is found and stop reading .gitignore. |
| break |
| # Ignore lines which begin with '#'. |
| else: |
| for filename in glob.glob(wildcard): |
| try: |
| os.remove(filename) |
| except OSError: |
| shutil.rmtree(filename, ignore_errors=True) |
| |
| # It's an old-style class in Python 2.7... |
| distutils.command.clean.clean.run(self) |
| |
| def configure_extension_build(): |
| r"""Configures extension build options according to system environment and user's choice. |
| |
| Returns: |
| The input to parameters ext_modules, cmdclass, packages, and entry_points as required in setuptools.setup. |
| """ |
| |
| try: |
| cmake_cache_vars = defaultdict(lambda: False, cmake.get_cmake_cache_variables()) |
| except FileNotFoundError: |
| # CMakeCache.txt does not exist. Probably running "python setup.py clean" over a clean directory. |
| cmake_cache_vars = defaultdict(lambda: False) |
| |
| ################################################################################ |
| # Configure compile flags |
| ################################################################################ |
| |
| library_dirs = [] |
| extra_install_requires = [] |
| |
| if IS_WINDOWS: |
| # /NODEFAULTLIB makes sure we only link to DLL runtime |
| # and matches the flags set for protobuf and ONNX |
| extra_link_args = ['/NODEFAULTLIB:LIBCMT.LIB'] |
| # /MD links against DLL runtime |
| # and matches the flags set for protobuf and ONNX |
| # /Z7 turns on symbolic debugging information in .obj files |
| # /EHsc is about standard C++ exception handling |
| # /DNOMINMAX removes builtin min/max functions |
| # /wdXXXX disables warning no. XXXX |
| extra_compile_args = ['/MD', '/Z7', |
| '/EHsc', '/DNOMINMAX', |
| '/wd4267', '/wd4251', '/wd4522', '/wd4522', '/wd4838', |
| '/wd4305', '/wd4244', '/wd4190', '/wd4101', '/wd4996', |
| '/wd4275'] |
| else: |
| extra_link_args = [] |
| extra_compile_args = [ |
| '-std=c++14', |
| '-Wall', |
| '-Wextra', |
| '-Wno-strict-overflow', |
| '-Wno-unused-parameter', |
| '-Wno-missing-field-initializers', |
| '-Wno-write-strings', |
| '-Wno-unknown-pragmas', |
| # This is required for Python 2 declarations that are deprecated in 3. |
| '-Wno-deprecated-declarations', |
| # Python 2.6 requires -fno-strict-aliasing, see |
| # http://legacy.python.org/dev/peps/pep-3123/ |
| # We also depend on it in our code (even Python 3). |
| '-fno-strict-aliasing', |
| # Clang has an unfixed bug leading to spurious missing |
| # braces warnings, see |
| # https://bugs.llvm.org/show_bug.cgi?id=21629 |
| '-Wno-missing-braces', |
| ] |
| if check_env_flag('WERROR'): |
| extra_compile_args.append('-Werror') |
| |
| library_dirs.append(lib_path) |
| |
| main_compile_args = [] |
| main_libraries = ['shm', 'torch_python'] |
| main_link_args = [] |
| main_sources = ["torch/csrc/stub.cpp"] |
| |
| if cmake_cache_vars['USE_CUDA']: |
| library_dirs.append( |
| os.path.dirname(cmake_cache_vars['CUDA_CUDA_LIB'])) |
| |
| if cmake_cache_vars['USE_NUMPY']: |
| extra_install_requires += ['numpy'] |
| |
| if build_type.is_debug(): |
| if IS_WINDOWS: |
| extra_link_args.append('/DEBUG:FULL') |
| else: |
| extra_compile_args += ['-O0', '-g'] |
| extra_link_args += ['-O0', '-g'] |
| |
| if build_type.is_rel_with_deb_info(): |
| if IS_WINDOWS: |
| extra_link_args.append('/DEBUG:FULL') |
| else: |
| extra_compile_args += ['-g'] |
| extra_link_args += ['-g'] |
| |
| |
| def make_relative_rpath(path): |
| if IS_DARWIN: |
| return '-Wl,-rpath,@loader_path/' + path |
| elif IS_WINDOWS: |
| return '' |
| else: |
| return '-Wl,-rpath,$ORIGIN/' + path |
| |
| ################################################################################ |
| # Declare extensions and package |
| ################################################################################ |
| |
| extensions = [] |
| packages = find_packages(exclude=('tools', 'tools.*')) |
| C = Extension("torch._C", |
| libraries=main_libraries, |
| sources=main_sources, |
| language='c++', |
| extra_compile_args=main_compile_args + extra_compile_args, |
| include_dirs=[], |
| library_dirs=library_dirs, |
| extra_link_args=extra_link_args + main_link_args + [make_relative_rpath('lib')]) |
| extensions.append(C) |
| |
| if not IS_WINDOWS: |
| DL = Extension("torch._dl", |
| sources=["torch/csrc/dl.c"], |
| language='c') |
| extensions.append(DL) |
| |
| # These extensions are built by cmake and copied manually in build_extensions() |
| # inside the build_ext implementaiton |
| extensions.append( |
| Extension( |
| name=str('caffe2.python.caffe2_pybind11_state'), |
| sources=[]), |
| ) |
| if cmake_cache_vars['USE_CUDA']: |
| extensions.append( |
| Extension( |
| name=str('caffe2.python.caffe2_pybind11_state_gpu'), |
| sources=[]), |
| ) |
| if cmake_cache_vars['USE_ROCM']: |
| extensions.append( |
| Extension( |
| name=str('caffe2.python.caffe2_pybind11_state_hip'), |
| sources=[]), |
| ) |
| |
| cmdclass = { |
| 'build_ext': build_ext, |
| 'clean': clean, |
| 'install': install, |
| } |
| |
| entry_points = { |
| 'console_scripts': [ |
| 'convert-caffe2-to-onnx = caffe2.python.onnx.bin.conversion:caffe2_to_onnx', |
| 'convert-onnx-to-caffe2 = caffe2.python.onnx.bin.conversion:onnx_to_caffe2', |
| ] |
| } |
| |
| return extensions, cmdclass, packages, entry_points, extra_install_requires |
| |
| # post run, warnings, printed at the end to make them more visible |
| build_update_message = """ |
| It is no longer necessary to use the 'build' or 'rebuild' targets |
| |
| To install: |
| $ python setup.py install |
| To develop locally: |
| $ python setup.py develop |
| To force cmake to re-generate native build files (off by default): |
| $ python setup.py develop --cmake |
| """ |
| |
| |
| def print_box(msg): |
| lines = msg.split('\n') |
| size = max(len(l) + 1 for l in lines) |
| print('-' * (size + 2)) |
| for l in lines: |
| print('|{}{}|'.format(l, ' ' * (size - len(l)))) |
| print('-' * (size + 2)) |
| |
| if __name__ == '__main__': |
| # Parse the command line and check the arguments |
| # before we proceed with building deps and setup |
| dist = Distribution() |
| dist.script_name = sys.argv[0] |
| dist.script_args = sys.argv[1:] |
| try: |
| ok = dist.parse_command_line() |
| except DistutilsArgError as msg: |
| raise SystemExit(core.gen_usage(dist.script_name) + "\nerror: %s" % msg) |
| if not ok: |
| sys.exit() |
| |
| if RUN_BUILD_DEPS: |
| build_deps() |
| |
| extensions, cmdclass, packages, entry_points, extra_install_requires = configure_extension_build() |
| |
| install_requires += extra_install_requires |
| |
| setup( |
| name=package_name, |
| version=version, |
| description=("Tensors and Dynamic neural networks in " |
| "Python with strong GPU acceleration"), |
| ext_modules=extensions, |
| cmdclass=cmdclass, |
| packages=packages, |
| entry_points=entry_points, |
| install_requires=install_requires, |
| package_data={ |
| 'torch': [ |
| 'py.typed', |
| 'bin/*', |
| 'test/*', |
| '__init__.pyi', |
| 'cuda/*.pyi', |
| 'optim/*.pyi', |
| 'autograd/*.pyi', |
| 'utils/data/*.pyi', |
| 'nn/*.pyi', |
| 'nn/modules/*.pyi', |
| 'nn/parallel/*.pyi', |
| 'lib/*.so*', |
| 'lib/*.dylib*', |
| 'lib/*.dll', |
| 'lib/*.lib', |
| 'lib/*.pdb', |
| 'lib/torch_shm_manager', |
| 'lib/*.h', |
| 'include/ATen/*.h', |
| 'include/ATen/cpu/*.h', |
| 'include/ATen/cpu/vec256/*.h', |
| 'include/ATen/core/*.h', |
| 'include/ATen/cuda/*.cuh', |
| 'include/ATen/cuda/*.h', |
| 'include/ATen/cuda/detail/*.cuh', |
| 'include/ATen/cuda/detail/*.h', |
| 'include/ATen/cudnn/*.h', |
| 'include/ATen/hip/*.cuh', |
| 'include/ATen/hip/*.h', |
| 'include/ATen/hip/detail/*.cuh', |
| 'include/ATen/hip/detail/*.h', |
| 'include/ATen/hip/impl/*.h', |
| 'include/ATen/detail/*.h', |
| 'include/ATen/native/*.h', |
| 'include/ATen/native/cpu/*.h', |
| 'include/ATen/native/quantized/*.h', |
| 'include/ATen/native/quantized/cpu/*.h', |
| 'include/ATen/quantized/*.h', |
| 'include/caffe2/utils/*.h', |
| 'include/caffe2/utils/**/*.h', |
| 'include/c10/*.h', |
| 'include/c10/macros/*.h', |
| 'include/c10/core/*.h', |
| 'include/ATen/core/boxing/*.h', |
| 'include/ATen/core/boxing/impl/*.h', |
| 'include/ATen/core/dispatch/*.h', |
| 'include/ATen/core/op_registration/*.h', |
| 'include/c10/core/impl/*.h', |
| 'include/c10/util/*.h', |
| 'include/c10/cuda/*.h', |
| 'include/c10/cuda/impl/*.h', |
| 'include/c10/hip/*.h', |
| 'include/c10/hip/impl/*.h', |
| 'include/c10d/*.hpp', |
| 'include/caffe2/**/*.h', |
| 'include/torch/*.h', |
| 'include/torch/csrc/*.h', |
| 'include/torch/csrc/api/include/torch/*.h', |
| 'include/torch/csrc/api/include/torch/data/*.h', |
| 'include/torch/csrc/api/include/torch/data/dataloader/*.h', |
| 'include/torch/csrc/api/include/torch/data/datasets/*.h', |
| 'include/torch/csrc/api/include/torch/data/detail/*.h', |
| 'include/torch/csrc/api/include/torch/data/samplers/*.h', |
| 'include/torch/csrc/api/include/torch/data/transforms/*.h', |
| 'include/torch/csrc/api/include/torch/detail/*.h', |
| 'include/torch/csrc/api/include/torch/detail/ordered_dict.h', |
| 'include/torch/csrc/api/include/torch/nn/*.h', |
| 'include/torch/csrc/api/include/torch/nn/functional/*.h', |
| 'include/torch/csrc/api/include/torch/nn/options/*.h', |
| 'include/torch/csrc/api/include/torch/nn/modules/*.h', |
| 'include/torch/csrc/api/include/torch/nn/modules/container/*.h', |
| 'include/torch/csrc/api/include/torch/nn/parallel/*.h', |
| 'include/torch/csrc/api/include/torch/nn/utils/*.h', |
| 'include/torch/csrc/api/include/torch/optim/*.h', |
| 'include/torch/csrc/api/include/torch/serialize/*.h', |
| 'include/torch/csrc/autograd/*.h', |
| 'include/torch/csrc/autograd/functions/*.h', |
| 'include/torch/csrc/autograd/generated/*.h', |
| 'include/torch/csrc/autograd/utils/*.h', |
| 'include/torch/csrc/cuda/*.h', |
| 'include/torch/csrc/jit/*.h', |
| 'include/torch/csrc/jit/generated/*.h', |
| 'include/torch/csrc/jit/passes/*.h', |
| 'include/torch/csrc/jit/passes/utils/*.h', |
| 'include/torch/csrc/jit/runtime/*.h', |
| 'include/torch/csrc/jit/ir/*.h', |
| 'include/torch/csrc/jit/frontend/*.h', |
| 'include/torch/csrc/jit/api/*.h', |
| 'include/torch/csrc/jit/serialization/*.h', |
| 'include/torch/csrc/jit/python/*.h', |
| 'include/torch/csrc/jit/testing/*.h', |
| 'include/torch/csrc/onnx/*.h', |
| 'include/torch/csrc/utils/*.h', |
| 'include/pybind11/*.h', |
| 'include/pybind11/detail/*.h', |
| 'include/TH/*.h*', |
| 'include/TH/generic/*.h*', |
| 'include/THC/*.cuh', |
| 'include/THC/*.h*', |
| 'include/THC/generic/*.h', |
| 'include/THCUNN/*.cuh', |
| 'include/THCUNN/generic/*.h', |
| 'include/THH/*.cuh', |
| 'include/THH/*.h*', |
| 'include/THH/generic/*.h', |
| 'share/cmake/ATen/*.cmake', |
| 'share/cmake/Caffe2/*.cmake', |
| 'share/cmake/Caffe2/public/*.cmake', |
| 'share/cmake/Caffe2/Modules_CUDA_fix/*.cmake', |
| 'share/cmake/Caffe2/Modules_CUDA_fix/upstream/*.cmake', |
| 'share/cmake/Caffe2/Modules_CUDA_fix/upstream/FindCUDA/*.cmake', |
| 'share/cmake/Gloo/*.cmake', |
| 'share/cmake/Torch/*.cmake', |
| ], |
| 'caffe2': [ |
| 'python/serialized_test/data/operator_test/*.zip', |
| ], |
| }, |
| url='https://pytorch.org/', |
| download_url='https://github.com/pytorch/pytorch/tags', |
| author='PyTorch Team', |
| author_email='packages@pytorch.org', |
| python_requires='>=3.6.1', |
| # PyPI package information. |
| classifiers=[ |
| 'Development Status :: 5 - Production/Stable', |
| 'Intended Audience :: Developers', |
| 'Intended Audience :: Education', |
| 'Intended Audience :: Science/Research', |
| 'License :: OSI Approved :: BSD License', |
| 'Programming Language :: C++', |
| 'Programming Language :: Python :: 3', |
| 'Programming Language :: Python :: 3.6', |
| 'Programming Language :: Python :: 3.7', |
| 'Programming Language :: Python :: 3.8', |
| 'Topic :: Scientific/Engineering', |
| 'Topic :: Scientific/Engineering :: Mathematics', |
| 'Topic :: Scientific/Engineering :: Artificial Intelligence', |
| 'Topic :: Software Development', |
| 'Topic :: Software Development :: Libraries', |
| 'Topic :: Software Development :: Libraries :: Python Modules', |
| ], |
| license='BSD-3', |
| keywords='pytorch machine learning', |
| ) |
| if EMIT_BUILD_WARNING: |
| print_box(build_update_message) |
