| #include <stdbool.h> | |
| #include "Python.h" | |
| #include "pycore_flowgraph.h" | |
| #include "pycore_compile.h" | |
| #include "pycore_pymem.h" // _PyMem_IsPtrFreed() | |
| #include "pycore_opcode_utils.h" | |
| #include "pycore_opcode_metadata.h" // OPCODE_HAS_ARG, etc | |
| #undef SUCCESS | |
| #undef ERROR | |
| #define SUCCESS 0 | |
| #define ERROR -1 | |
| #define RETURN_IF_ERROR(X) \ | |
| if ((X) == -1) { \ | |
| return ERROR; \ | |
| } | |
| #define DEFAULT_BLOCK_SIZE 16 | |
| typedef _Py_SourceLocation location; | |
| typedef _PyJumpTargetLabel jump_target_label; | |
| typedef struct _PyCfgInstruction { | |
| int i_opcode; | |
| int i_oparg; | |
| _Py_SourceLocation i_loc; | |
| struct _PyCfgBasicblock *i_target; /* target block (if jump instruction) */ | |
| struct _PyCfgBasicblock *i_except; /* target block when exception is raised */ | |
| } cfg_instr; | |
| typedef struct _PyCfgBasicblock { | |
| /* Each basicblock in a compilation unit is linked via b_list in the | |
| reverse order that the block are allocated. b_list points to the next | |
| block in this list, not to be confused with b_next, which is next by | |
| control flow. */ | |
| struct _PyCfgBasicblock *b_list; | |
| /* The label of this block if it is a jump target, -1 otherwise */ | |
| _PyJumpTargetLabel b_label; | |
| /* Exception stack at start of block, used by assembler to create the exception handling table */ | |
| struct _PyCfgExceptStack *b_exceptstack; | |
| /* pointer to an array of instructions, initially NULL */ | |
| cfg_instr *b_instr; | |
| /* If b_next is non-NULL, it is a pointer to the next | |
| block reached by normal control flow. */ | |
| struct _PyCfgBasicblock *b_next; | |
| /* number of instructions used */ | |
| int b_iused; | |
| /* length of instruction array (b_instr) */ | |
| int b_ialloc; | |
| /* Used by add_checks_for_loads_of_unknown_variables */ | |
| uint64_t b_unsafe_locals_mask; | |
| /* Number of predecessors that a block has. */ | |
| int b_predecessors; | |
| /* depth of stack upon entry of block, computed by stackdepth() */ | |
| int b_startdepth; | |
| /* Basic block is an exception handler that preserves lasti */ | |
| unsigned b_preserve_lasti : 1; | |
| /* Used by compiler passes to mark whether they have visited a basic block. */ | |
| unsigned b_visited : 1; | |
| /* b_except_handler is used by the cold-detection algorithm to mark exception targets */ | |
| unsigned b_except_handler : 1; | |
| /* b_cold is true if this block is not perf critical (like an exception handler) */ | |
| unsigned b_cold : 1; | |
| /* b_warm is used by the cold-detection algorithm to mark blocks which are definitely not cold */ | |
| unsigned b_warm : 1; | |
| } basicblock; | |
| struct _PyCfgBuilder { | |
| /* The entryblock, at which control flow begins. All blocks of the | |
| CFG are reachable through the b_next links */ | |
| struct _PyCfgBasicblock *g_entryblock; | |
| /* Pointer to the most recently allocated block. By following | |
| b_list links, you can reach all allocated blocks. */ | |
| struct _PyCfgBasicblock *g_block_list; | |
| /* pointer to the block currently being constructed */ | |
| struct _PyCfgBasicblock *g_curblock; | |
| /* label for the next instruction to be placed */ | |
| _PyJumpTargetLabel g_current_label; | |
| }; | |
| typedef struct _PyCfgBuilder cfg_builder; | |
| static const jump_target_label NO_LABEL = {-1}; | |
| #define SAME_LABEL(L1, L2) ((L1).id == (L2).id) | |
| #define IS_LABEL(L) (!SAME_LABEL((L), (NO_LABEL))) | |
| #define LOCATION(LNO, END_LNO, COL, END_COL) \ | |
| ((const _Py_SourceLocation){(LNO), (END_LNO), (COL), (END_COL)}) | |
| static inline int | |
| is_block_push(cfg_instr *i) | |
| { | |
| assert(OPCODE_HAS_ARG(i->i_opcode) || !IS_BLOCK_PUSH_OPCODE(i->i_opcode)); | |
| return IS_BLOCK_PUSH_OPCODE(i->i_opcode); | |
| } | |
| static inline int | |
| is_jump(cfg_instr *i) | |
| { | |
| return OPCODE_HAS_JUMP(i->i_opcode); | |
| } | |
| /* One arg*/ | |
| #define INSTR_SET_OP1(I, OP, ARG) \ | |
| do { \ | |
| assert(OPCODE_HAS_ARG(OP)); \ | |
| cfg_instr *_instr__ptr_ = (I); \ | |
| _instr__ptr_->i_opcode = (OP); \ | |
| _instr__ptr_->i_oparg = (ARG); \ | |
| } while (0); | |
| /* No args*/ | |
| #define INSTR_SET_OP0(I, OP) \ | |
| do { \ | |
| assert(!OPCODE_HAS_ARG(OP)); \ | |
| cfg_instr *_instr__ptr_ = (I); \ | |
| _instr__ptr_->i_opcode = (OP); \ | |
| _instr__ptr_->i_oparg = 0; \ | |
| } while (0); | |
| /***** Blocks *****/ | |
| /* Returns the offset of the next instruction in the current block's | |
| b_instr array. Resizes the b_instr as necessary. | |
| Returns -1 on failure. | |
| */ | |
| static int | |
| basicblock_next_instr(basicblock *b) | |
| { | |
| assert(b != NULL); | |
| RETURN_IF_ERROR( | |
| _PyCompile_EnsureArrayLargeEnough( | |
| b->b_iused + 1, | |
| (void**)&b->b_instr, | |
| &b->b_ialloc, | |
| DEFAULT_BLOCK_SIZE, | |
| sizeof(cfg_instr))); | |
| return b->b_iused++; | |
| } | |
| static cfg_instr * | |
| basicblock_last_instr(const basicblock *b) { | |
| assert(b->b_iused >= 0); | |
| if (b->b_iused > 0) { | |
| assert(b->b_instr != NULL); | |
| return &b->b_instr[b->b_iused - 1]; | |
| } | |
| return NULL; | |
| } | |
| /* Allocate a new block and return a pointer to it. | |
| Returns NULL on error. | |
| */ | |
| static basicblock * | |
| cfg_builder_new_block(cfg_builder *g) | |
| { | |
| basicblock *b = (basicblock *)PyMem_Calloc(1, sizeof(basicblock)); | |
| if (b == NULL) { | |
| PyErr_NoMemory(); | |
| return NULL; | |
| } | |
| /* Extend the singly linked list of blocks with new block. */ | |
| b->b_list = g->g_block_list; | |
| g->g_block_list = b; | |
| b->b_label = NO_LABEL; | |
| return b; | |
| } | |
| static int | |
| basicblock_addop(basicblock *b, int opcode, int oparg, location loc) | |
| { | |
| assert(IS_WITHIN_OPCODE_RANGE(opcode)); | |
| assert(!IS_ASSEMBLER_OPCODE(opcode)); | |
| assert(OPCODE_HAS_ARG(opcode) || HAS_TARGET(opcode) || oparg == 0); | |
| assert(0 <= oparg && oparg < (1 << 30)); | |
| int off = basicblock_next_instr(b); | |
| if (off < 0) { | |
| return ERROR; | |
| } | |
| cfg_instr *i = &b->b_instr[off]; | |
| i->i_opcode = opcode; | |
| i->i_oparg = oparg; | |
| i->i_target = NULL; | |
| i->i_loc = loc; | |
| return SUCCESS; | |
| } | |
| static int | |
| basicblock_add_jump(basicblock *b, int opcode, basicblock *target, location loc) | |
| { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| if (last && is_jump(last)) { | |
| return ERROR; | |
| } | |
| RETURN_IF_ERROR( | |
| basicblock_addop(b, opcode, target->b_label.id, loc)); | |
| last = basicblock_last_instr(b); | |
| assert(last && last->i_opcode == opcode); | |
| last->i_target = target; | |
| return SUCCESS; | |
| } | |
| static inline int | |
| basicblock_append_instructions(basicblock *to, basicblock *from) | |
| { | |
| for (int i = 0; i < from->b_iused; i++) { | |
| int n = basicblock_next_instr(to); | |
| if (n < 0) { | |
| return ERROR; | |
| } | |
| to->b_instr[n] = from->b_instr[i]; | |
| } | |
| return SUCCESS; | |
| } | |
| static inline int | |
| basicblock_nofallthrough(const basicblock *b) { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| return (last && | |
| (IS_SCOPE_EXIT_OPCODE(last->i_opcode) || | |
| IS_UNCONDITIONAL_JUMP_OPCODE(last->i_opcode))); | |
| } | |
| #define BB_NO_FALLTHROUGH(B) (basicblock_nofallthrough(B)) | |
| #define BB_HAS_FALLTHROUGH(B) (!basicblock_nofallthrough(B)) | |
| static basicblock * | |
| copy_basicblock(cfg_builder *g, basicblock *block) | |
| { | |
| /* Cannot copy a block if it has a fallthrough, since | |
| * a block can only have one fallthrough predecessor. | |
| */ | |
| assert(BB_NO_FALLTHROUGH(block)); | |
| basicblock *result = cfg_builder_new_block(g); | |
| if (result == NULL) { | |
| return NULL; | |
| } | |
| if (basicblock_append_instructions(result, block) < 0) { | |
| return NULL; | |
| } | |
| return result; | |
| } | |
| static int | |
| basicblock_insert_instruction(basicblock *block, int pos, cfg_instr *instr) { | |
| RETURN_IF_ERROR(basicblock_next_instr(block)); | |
| for (int i = block->b_iused - 1; i > pos; i--) { | |
| block->b_instr[i] = block->b_instr[i-1]; | |
| } | |
| block->b_instr[pos] = *instr; | |
| return SUCCESS; | |
| } | |
| /* For debugging purposes only */ | |
| #if 0 | |
| static void | |
| dump_instr(cfg_instr *i) | |
| { | |
| const char *jump = is_jump(i) ? "jump " : ""; | |
| char arg[128]; | |
| *arg = '\0'; | |
| if (OPCODE_HAS_ARG(i->i_opcode)) { | |
| sprintf(arg, "arg: %d ", i->i_oparg); | |
| } | |
| if (HAS_TARGET(i->i_opcode)) { | |
| sprintf(arg, "target: %p [%d] ", i->i_target, i->i_oparg); | |
| } | |
| fprintf(stderr, "line: %d, %s (%d) %s%s\n", | |
| i->i_loc.lineno, _PyOpcode_OpName[i->i_opcode], i->i_opcode, arg, jump); | |
| } | |
| static inline int | |
| basicblock_returns(const basicblock *b) { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| return last && (last->i_opcode == RETURN_VALUE || last->i_opcode == RETURN_CONST); | |
| } | |
| static void | |
| dump_basicblock(const basicblock *b) | |
| { | |
| const char *b_return = basicblock_returns(b) ? "return " : ""; | |
| fprintf(stderr, "%d: [EH=%d CLD=%d WRM=%d NO_FT=%d %p] used: %d, depth: %d, preds: %d %s\n", | |
| b->b_label.id, b->b_except_handler, b->b_cold, b->b_warm, BB_NO_FALLTHROUGH(b), b, b->b_iused, | |
| b->b_startdepth, b->b_predecessors, b_return); | |
| if (b->b_instr) { | |
| int i; | |
| for (i = 0; i < b->b_iused; i++) { | |
| fprintf(stderr, " [%02d] ", i); | |
| dump_instr(b->b_instr + i); | |
| } | |
| } | |
| } | |
| void | |
| _PyCfgBuilder_DumpGraph(const basicblock *entryblock) | |
| { | |
| for (const basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| dump_basicblock(b); | |
| } | |
| } | |
| #endif | |
| /***** CFG construction and modification *****/ | |
| static basicblock * | |
| cfg_builder_use_next_block(cfg_builder *g, basicblock *block) | |
| { | |
| assert(block != NULL); | |
| g->g_curblock->b_next = block; | |
| g->g_curblock = block; | |
| return block; | |
| } | |
| static inline int | |
| basicblock_exits_scope(const basicblock *b) { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| return last && IS_SCOPE_EXIT_OPCODE(last->i_opcode); | |
| } | |
| static inline int | |
| basicblock_has_eval_break(const basicblock *b) { | |
| for (int i = 0; i < b->b_iused; i++) { | |
| if (OPCODE_HAS_EVAL_BREAK(b->b_instr[i].i_opcode)) { | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| static bool | |
| cfg_builder_current_block_is_terminated(cfg_builder *g) | |
| { | |
| cfg_instr *last = basicblock_last_instr(g->g_curblock); | |
| if (last && IS_TERMINATOR_OPCODE(last->i_opcode)) { | |
| return true; | |
| } | |
| if (IS_LABEL(g->g_current_label)) { | |
| if (last || IS_LABEL(g->g_curblock->b_label)) { | |
| return true; | |
| } | |
| else { | |
| /* current block is empty, label it */ | |
| g->g_curblock->b_label = g->g_current_label; | |
| g->g_current_label = NO_LABEL; | |
| } | |
| } | |
| return false; | |
| } | |
| static int | |
| cfg_builder_maybe_start_new_block(cfg_builder *g) | |
| { | |
| if (cfg_builder_current_block_is_terminated(g)) { | |
| basicblock *b = cfg_builder_new_block(g); | |
| if (b == NULL) { | |
| return ERROR; | |
| } | |
| b->b_label = g->g_current_label; | |
| g->g_current_label = NO_LABEL; | |
| cfg_builder_use_next_block(g, b); | |
| } | |
| return SUCCESS; | |
| } | |
| #ifndef NDEBUG | |
| static bool | |
| cfg_builder_check(cfg_builder *g) | |
| { | |
| assert(g->g_entryblock->b_iused > 0); | |
| for (basicblock *block = g->g_block_list; block != NULL; block = block->b_list) { | |
| assert(!_PyMem_IsPtrFreed(block)); | |
| if (block->b_instr != NULL) { | |
| assert(block->b_ialloc > 0); | |
| assert(block->b_iused >= 0); | |
| assert(block->b_ialloc >= block->b_iused); | |
| } | |
| else { | |
| assert (block->b_iused == 0); | |
| assert (block->b_ialloc == 0); | |
| } | |
| } | |
| return true; | |
| } | |
| #endif | |
| static int | |
| init_cfg_builder(cfg_builder *g) | |
| { | |
| g->g_block_list = NULL; | |
| basicblock *block = cfg_builder_new_block(g); | |
| if (block == NULL) { | |
| return ERROR; | |
| } | |
| g->g_curblock = g->g_entryblock = block; | |
| g->g_current_label = NO_LABEL; | |
| return SUCCESS; | |
| } | |
| cfg_builder * | |
| _PyCfgBuilder_New(void) | |
| { | |
| cfg_builder *g = PyMem_Malloc(sizeof(cfg_builder)); | |
| if (g == NULL) { | |
| PyErr_NoMemory(); | |
| return NULL; | |
| } | |
| memset(g, 0, sizeof(cfg_builder)); | |
| if (init_cfg_builder(g) < 0) { | |
| PyMem_Free(g); | |
| return NULL; | |
| } | |
| return g; | |
| } | |
| void | |
| _PyCfgBuilder_Free(cfg_builder *g) | |
| { | |
| if (g == NULL) { | |
| return; | |
| } | |
| assert(cfg_builder_check(g)); | |
| basicblock *b = g->g_block_list; | |
| while (b != NULL) { | |
| if (b->b_instr) { | |
| PyMem_Free((void *)b->b_instr); | |
| } | |
| basicblock *next = b->b_list; | |
| PyMem_Free((void *)b); | |
| b = next; | |
| } | |
| PyMem_Free(g); | |
| } | |
| int | |
| _PyCfgBuilder_CheckSize(cfg_builder *g) | |
| { | |
| int nblocks = 0; | |
| for (basicblock *b = g->g_block_list; b != NULL; b = b->b_list) { | |
| nblocks++; | |
| } | |
| if ((size_t)nblocks > SIZE_MAX / sizeof(basicblock *)) { | |
| PyErr_NoMemory(); | |
| return ERROR; | |
| } | |
| return SUCCESS; | |
| } | |
| int | |
| _PyCfgBuilder_UseLabel(cfg_builder *g, jump_target_label lbl) | |
| { | |
| g->g_current_label = lbl; | |
| return cfg_builder_maybe_start_new_block(g); | |
| } | |
| int | |
| _PyCfgBuilder_Addop(cfg_builder *g, int opcode, int oparg, location loc) | |
| { | |
| RETURN_IF_ERROR(cfg_builder_maybe_start_new_block(g)); | |
| return basicblock_addop(g->g_curblock, opcode, oparg, loc); | |
| } | |
| static basicblock * | |
| next_nonempty_block(basicblock *b) | |
| { | |
| while (b && b->b_iused == 0) { | |
| b = b->b_next; | |
| } | |
| return b; | |
| } | |
| /***** debugging helpers *****/ | |
| #ifndef NDEBUG | |
| static int remove_redundant_nops(cfg_builder *g); | |
| static bool | |
| no_redundant_nops(cfg_builder *g) { | |
| if (remove_redundant_nops(g) != 0) { | |
| return false; | |
| } | |
| return true; | |
| } | |
| static bool | |
| no_redundant_jumps(cfg_builder *g) { | |
| for (basicblock *b = g->g_entryblock; b != NULL; b = b->b_next) { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| if (last != NULL) { | |
| if (IS_UNCONDITIONAL_JUMP_OPCODE(last->i_opcode)) { | |
| basicblock *next = next_nonempty_block(b->b_next); | |
| basicblock *jump_target = next_nonempty_block(last->i_target); | |
| if (jump_target == next) { | |
| assert(next); | |
| if (last->i_loc.lineno == next->b_instr[0].i_loc.lineno) { | |
| assert(0); | |
| return false; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| return true; | |
| } | |
| #endif | |
| /***** CFG preprocessing (jump targets and exceptions) *****/ | |
| static int | |
| normalize_jumps_in_block(cfg_builder *g, basicblock *b) { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| if (last == NULL || !is_jump(last) || | |
| IS_UNCONDITIONAL_JUMP_OPCODE(last->i_opcode)) { | |
| return SUCCESS; | |
| } | |
| assert(!IS_ASSEMBLER_OPCODE(last->i_opcode)); | |
| bool is_forward = last->i_target->b_visited == 0; | |
| if (is_forward) { | |
| return SUCCESS; | |
| } | |
| int reversed_opcode = 0; | |
| switch(last->i_opcode) { | |
| case POP_JUMP_IF_NOT_NONE: | |
| reversed_opcode = POP_JUMP_IF_NONE; | |
| break; | |
| case POP_JUMP_IF_NONE: | |
| reversed_opcode = POP_JUMP_IF_NOT_NONE; | |
| break; | |
| case POP_JUMP_IF_FALSE: | |
| reversed_opcode = POP_JUMP_IF_TRUE; | |
| break; | |
| case POP_JUMP_IF_TRUE: | |
| reversed_opcode = POP_JUMP_IF_FALSE; | |
| break; | |
| } | |
| /* transform 'conditional jump T' to | |
| * 'reversed_jump b_next' followed by 'jump_backwards T' | |
| */ | |
| basicblock *target = last->i_target; | |
| basicblock *backwards_jump = cfg_builder_new_block(g); | |
| if (backwards_jump == NULL) { | |
| return ERROR; | |
| } | |
| RETURN_IF_ERROR( | |
| basicblock_add_jump(backwards_jump, JUMP, target, last->i_loc)); | |
| last->i_opcode = reversed_opcode; | |
| last->i_target = b->b_next; | |
| backwards_jump->b_cold = b->b_cold; | |
| backwards_jump->b_next = b->b_next; | |
| b->b_next = backwards_jump; | |
| return SUCCESS; | |
| } | |
| static int | |
| normalize_jumps(cfg_builder *g) | |
| { | |
| basicblock *entryblock = g->g_entryblock; | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| b->b_visited = 0; | |
| } | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| b->b_visited = 1; | |
| RETURN_IF_ERROR(normalize_jumps_in_block(g, b)); | |
| } | |
| return SUCCESS; | |
| } | |
| static int | |
| check_cfg(cfg_builder *g) { | |
| for (basicblock *b = g->g_entryblock; b != NULL; b = b->b_next) { | |
| /* Raise SystemError if jump or exit is not last instruction in the block. */ | |
| for (int i = 0; i < b->b_iused; i++) { | |
| int opcode = b->b_instr[i].i_opcode; | |
| assert(!IS_ASSEMBLER_OPCODE(opcode)); | |
| if (IS_TERMINATOR_OPCODE(opcode)) { | |
| if (i != b->b_iused - 1) { | |
| PyErr_SetString(PyExc_SystemError, "malformed control flow graph."); | |
| return ERROR; | |
| } | |
| } | |
| } | |
| } | |
| return SUCCESS; | |
| } | |
| static int | |
| get_max_label(basicblock *entryblock) | |
| { | |
| int lbl = -1; | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| if (b->b_label.id > lbl) { | |
| lbl = b->b_label.id; | |
| } | |
| } | |
| return lbl; | |
| } | |
| /* Calculate the actual jump target from the target_label */ | |
| static int | |
| translate_jump_labels_to_targets(basicblock *entryblock) | |
| { | |
| int max_label = get_max_label(entryblock); | |
| size_t mapsize = sizeof(basicblock *) * (max_label + 1); | |
| basicblock **label2block = (basicblock **)PyMem_Malloc(mapsize); | |
| if (!label2block) { | |
| PyErr_NoMemory(); | |
| return ERROR; | |
| } | |
| memset(label2block, 0, mapsize); | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| if (b->b_label.id >= 0) { | |
| label2block[b->b_label.id] = b; | |
| } | |
| } | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| assert(instr->i_target == NULL); | |
| if (HAS_TARGET(instr->i_opcode)) { | |
| int lbl = instr->i_oparg; | |
| assert(lbl >= 0 && lbl <= max_label); | |
| instr->i_target = label2block[lbl]; | |
| assert(instr->i_target != NULL); | |
| assert(instr->i_target->b_label.id == lbl); | |
| } | |
| } | |
| } | |
| PyMem_Free(label2block); | |
| return SUCCESS; | |
| } | |
| static int | |
| mark_except_handlers(basicblock *entryblock) { | |
| #ifndef NDEBUG | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| assert(!b->b_except_handler); | |
| } | |
| #endif | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| for (int i=0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| if (is_block_push(instr)) { | |
| instr->i_target->b_except_handler = 1; | |
| } | |
| } | |
| } | |
| return SUCCESS; | |
| } | |
| struct _PyCfgExceptStack { | |
| basicblock *handlers[CO_MAXBLOCKS+2]; | |
| int depth; | |
| }; | |
| static basicblock * | |
| push_except_block(struct _PyCfgExceptStack *stack, cfg_instr *setup) { | |
| assert(is_block_push(setup)); | |
| int opcode = setup->i_opcode; | |
| basicblock * target = setup->i_target; | |
| if (opcode == SETUP_WITH || opcode == SETUP_CLEANUP) { | |
| target->b_preserve_lasti = 1; | |
| } | |
| assert(stack->depth <= CO_MAXBLOCKS); | |
| stack->handlers[++stack->depth] = target; | |
| return target; | |
| } | |
| static basicblock * | |
| pop_except_block(struct _PyCfgExceptStack *stack) { | |
| assert(stack->depth > 0); | |
| return stack->handlers[--stack->depth]; | |
| } | |
| static basicblock * | |
| except_stack_top(struct _PyCfgExceptStack *stack) { | |
| return stack->handlers[stack->depth]; | |
| } | |
| static struct _PyCfgExceptStack * | |
| make_except_stack(void) { | |
| struct _PyCfgExceptStack *new = PyMem_Malloc(sizeof(struct _PyCfgExceptStack)); | |
| if (new == NULL) { | |
| PyErr_NoMemory(); | |
| return NULL; | |
| } | |
| new->depth = 0; | |
| new->handlers[0] = NULL; | |
| return new; | |
| } | |
| static struct _PyCfgExceptStack * | |
| copy_except_stack(struct _PyCfgExceptStack *stack) { | |
| struct _PyCfgExceptStack *copy = PyMem_Malloc(sizeof(struct _PyCfgExceptStack)); | |
| if (copy == NULL) { | |
| PyErr_NoMemory(); | |
| return NULL; | |
| } | |
| memcpy(copy, stack, sizeof(struct _PyCfgExceptStack)); | |
| return copy; | |
| } | |
| static basicblock** | |
| make_cfg_traversal_stack(basicblock *entryblock) { | |
| int nblocks = 0; | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| b->b_visited = 0; | |
| nblocks++; | |
| } | |
| basicblock **stack = (basicblock **)PyMem_Malloc(sizeof(basicblock *) * nblocks); | |
| if (!stack) { | |
| PyErr_NoMemory(); | |
| } | |
| return stack; | |
| } | |
| Py_LOCAL_INLINE(int) | |
| stackdepth_push(basicblock ***sp, basicblock *b, int depth) | |
| { | |
| if (!(b->b_startdepth < 0 || b->b_startdepth == depth)) { | |
| PyErr_Format(PyExc_ValueError, "Invalid CFG, inconsistent stackdepth"); | |
| return ERROR; | |
| } | |
| if (b->b_startdepth < depth && b->b_startdepth < 100) { | |
| assert(b->b_startdepth < 0); | |
| b->b_startdepth = depth; | |
| *(*sp)++ = b; | |
| } | |
| return SUCCESS; | |
| } | |
| /* Find the flow path that needs the largest stack. We assume that | |
| * cycles in the flow graph have no net effect on the stack depth. | |
| */ | |
| static int | |
| calculate_stackdepth(cfg_builder *g) | |
| { | |
| basicblock *entryblock = g->g_entryblock; | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| b->b_startdepth = INT_MIN; | |
| } | |
| basicblock **stack = make_cfg_traversal_stack(entryblock); | |
| if (!stack) { | |
| return ERROR; | |
| } | |
| int stackdepth = -1; | |
| int maxdepth = 0; | |
| basicblock **sp = stack; | |
| if (stackdepth_push(&sp, entryblock, 0) < 0) { | |
| goto error; | |
| } | |
| while (sp != stack) { | |
| basicblock *b = *--sp; | |
| int depth = b->b_startdepth; | |
| assert(depth >= 0); | |
| basicblock *next = b->b_next; | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| int effect = PyCompile_OpcodeStackEffectWithJump( | |
| instr->i_opcode, instr->i_oparg, 0); | |
| if (effect == PY_INVALID_STACK_EFFECT) { | |
| PyErr_Format(PyExc_SystemError, | |
| "Invalid stack effect for opcode=%d, arg=%i", | |
| instr->i_opcode, instr->i_oparg); | |
| goto error; | |
| } | |
| int new_depth = depth + effect; | |
| if (new_depth < 0) { | |
| PyErr_Format(PyExc_ValueError, | |
| "Invalid CFG, stack underflow"); | |
| goto error; | |
| } | |
| if (new_depth > maxdepth) { | |
| maxdepth = new_depth; | |
| } | |
| if (HAS_TARGET(instr->i_opcode)) { | |
| effect = PyCompile_OpcodeStackEffectWithJump( | |
| instr->i_opcode, instr->i_oparg, 1); | |
| if (effect == PY_INVALID_STACK_EFFECT) { | |
| PyErr_Format(PyExc_SystemError, | |
| "Invalid stack effect for opcode=%d, arg=%i", | |
| instr->i_opcode, instr->i_oparg); | |
| goto error; | |
| } | |
| int target_depth = depth + effect; | |
| assert(target_depth >= 0); /* invalid code or bug in stackdepth() */ | |
| if (target_depth > maxdepth) { | |
| maxdepth = target_depth; | |
| } | |
| if (stackdepth_push(&sp, instr->i_target, target_depth) < 0) { | |
| goto error; | |
| } | |
| } | |
| depth = new_depth; | |
| assert(!IS_ASSEMBLER_OPCODE(instr->i_opcode)); | |
| if (IS_UNCONDITIONAL_JUMP_OPCODE(instr->i_opcode) || | |
| IS_SCOPE_EXIT_OPCODE(instr->i_opcode)) | |
| { | |
| /* remaining code is dead */ | |
| next = NULL; | |
| break; | |
| } | |
| } | |
| if (next != NULL) { | |
| assert(BB_HAS_FALLTHROUGH(b)); | |
| if (stackdepth_push(&sp, next, depth) < 0) { | |
| goto error; | |
| } | |
| } | |
| } | |
| stackdepth = maxdepth; | |
| error: | |
| PyMem_Free(stack); | |
| return stackdepth; | |
| } | |
| static int | |
| label_exception_targets(basicblock *entryblock) { | |
| basicblock **todo_stack = make_cfg_traversal_stack(entryblock); | |
| if (todo_stack == NULL) { | |
| return ERROR; | |
| } | |
| struct _PyCfgExceptStack *except_stack = make_except_stack(); | |
| if (except_stack == NULL) { | |
| PyMem_Free(todo_stack); | |
| PyErr_NoMemory(); | |
| return ERROR; | |
| } | |
| except_stack->depth = 0; | |
| todo_stack[0] = entryblock; | |
| entryblock->b_visited = 1; | |
| entryblock->b_exceptstack = except_stack; | |
| basicblock **todo = &todo_stack[1]; | |
| basicblock *handler = NULL; | |
| while (todo > todo_stack) { | |
| todo--; | |
| basicblock *b = todo[0]; | |
| assert(b->b_visited == 1); | |
| except_stack = b->b_exceptstack; | |
| assert(except_stack != NULL); | |
| b->b_exceptstack = NULL; | |
| handler = except_stack_top(except_stack); | |
| int last_yield_except_depth = -1; | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| if (is_block_push(instr)) { | |
| if (!instr->i_target->b_visited) { | |
| struct _PyCfgExceptStack *copy = copy_except_stack(except_stack); | |
| if (copy == NULL) { | |
| goto error; | |
| } | |
| instr->i_target->b_exceptstack = copy; | |
| todo[0] = instr->i_target; | |
| instr->i_target->b_visited = 1; | |
| todo++; | |
| } | |
| handler = push_except_block(except_stack, instr); | |
| } | |
| else if (instr->i_opcode == POP_BLOCK) { | |
| handler = pop_except_block(except_stack); | |
| INSTR_SET_OP0(instr, NOP); | |
| } | |
| else if (is_jump(instr)) { | |
| instr->i_except = handler; | |
| assert(i == b->b_iused -1); | |
| if (!instr->i_target->b_visited) { | |
| if (BB_HAS_FALLTHROUGH(b)) { | |
| struct _PyCfgExceptStack *copy = copy_except_stack(except_stack); | |
| if (copy == NULL) { | |
| goto error; | |
| } | |
| instr->i_target->b_exceptstack = copy; | |
| } | |
| else { | |
| instr->i_target->b_exceptstack = except_stack; | |
| except_stack = NULL; | |
| } | |
| todo[0] = instr->i_target; | |
| instr->i_target->b_visited = 1; | |
| todo++; | |
| } | |
| } | |
| else if (instr->i_opcode == YIELD_VALUE) { | |
| instr->i_except = handler; | |
| last_yield_except_depth = except_stack->depth; | |
| } | |
| else if (instr->i_opcode == RESUME) { | |
| instr->i_except = handler; | |
| if (instr->i_oparg != RESUME_AT_FUNC_START) { | |
| assert(last_yield_except_depth >= 0); | |
| if (last_yield_except_depth == 1) { | |
| instr->i_oparg |= RESUME_OPARG_DEPTH1_MASK; | |
| } | |
| last_yield_except_depth = -1; | |
| } | |
| } | |
| else { | |
| instr->i_except = handler; | |
| } | |
| } | |
| if (BB_HAS_FALLTHROUGH(b) && !b->b_next->b_visited) { | |
| assert(except_stack != NULL); | |
| b->b_next->b_exceptstack = except_stack; | |
| todo[0] = b->b_next; | |
| b->b_next->b_visited = 1; | |
| todo++; | |
| } | |
| else if (except_stack != NULL) { | |
| PyMem_Free(except_stack); | |
| } | |
| } | |
| #ifdef Py_DEBUG | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| assert(b->b_exceptstack == NULL); | |
| } | |
| #endif | |
| PyMem_Free(todo_stack); | |
| return SUCCESS; | |
| error: | |
| PyMem_Free(todo_stack); | |
| PyMem_Free(except_stack); | |
| return ERROR; | |
| } | |
| /***** CFG optimizations *****/ | |
| static int | |
| remove_unreachable(basicblock *entryblock) { | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| b->b_predecessors = 0; | |
| } | |
| basicblock **stack = make_cfg_traversal_stack(entryblock); | |
| if (stack == NULL) { | |
| return ERROR; | |
| } | |
| basicblock **sp = stack; | |
| entryblock->b_predecessors = 1; | |
| *sp++ = entryblock; | |
| entryblock->b_visited = 1; | |
| while (sp > stack) { | |
| basicblock *b = *(--sp); | |
| if (b->b_next && BB_HAS_FALLTHROUGH(b)) { | |
| if (!b->b_next->b_visited) { | |
| assert(b->b_next->b_predecessors == 0); | |
| *sp++ = b->b_next; | |
| b->b_next->b_visited = 1; | |
| } | |
| b->b_next->b_predecessors++; | |
| } | |
| for (int i = 0; i < b->b_iused; i++) { | |
| basicblock *target; | |
| cfg_instr *instr = &b->b_instr[i]; | |
| if (is_jump(instr) || is_block_push(instr)) { | |
| target = instr->i_target; | |
| if (!target->b_visited) { | |
| *sp++ = target; | |
| target->b_visited = 1; | |
| } | |
| target->b_predecessors++; | |
| } | |
| } | |
| } | |
| PyMem_Free(stack); | |
| /* Delete unreachable instructions */ | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| if (b->b_predecessors == 0) { | |
| b->b_iused = 0; | |
| b->b_except_handler = 0; | |
| } | |
| } | |
| return SUCCESS; | |
| } | |
| static int | |
| basicblock_remove_redundant_nops(basicblock *bb) { | |
| /* Remove NOPs when legal to do so. */ | |
| int dest = 0; | |
| int prev_lineno = -1; | |
| for (int src = 0; src < bb->b_iused; src++) { | |
| int lineno = bb->b_instr[src].i_loc.lineno; | |
| if (bb->b_instr[src].i_opcode == NOP) { | |
| /* Eliminate no-op if it doesn't have a line number */ | |
| if (lineno < 0) { | |
| continue; | |
| } | |
| /* or, if the previous instruction had the same line number. */ | |
| if (prev_lineno == lineno) { | |
| continue; | |
| } | |
| /* or, if the next instruction has same line number or no line number */ | |
| if (src < bb->b_iused - 1) { | |
| int next_lineno = bb->b_instr[src+1].i_loc.lineno; | |
| if (next_lineno == lineno) { | |
| continue; | |
| } | |
| if (next_lineno < 0) { | |
| bb->b_instr[src+1].i_loc = bb->b_instr[src].i_loc; | |
| continue; | |
| } | |
| } | |
| else { | |
| basicblock *next = next_nonempty_block(bb->b_next); | |
| /* or if last instruction in BB and next BB has same line number */ | |
| if (next) { | |
| location next_loc = NO_LOCATION; | |
| for (int next_i=0; next_i < next->b_iused; next_i++) { | |
| cfg_instr *instr = &next->b_instr[next_i]; | |
| if (instr->i_opcode == NOP && instr->i_loc.lineno == NO_LOCATION.lineno) { | |
| /* Skip over NOPs without location, they will be removed */ | |
| continue; | |
| } | |
| next_loc = instr->i_loc; | |
| break; | |
| } | |
| if (lineno == next_loc.lineno) { | |
| continue; | |
| } | |
| } | |
| } | |
| } | |
| if (dest != src) { | |
| bb->b_instr[dest] = bb->b_instr[src]; | |
| } | |
| dest++; | |
| prev_lineno = lineno; | |
| } | |
| assert(dest <= bb->b_iused); | |
| int num_removed = bb->b_iused - dest; | |
| bb->b_iused = dest; | |
| return num_removed; | |
| } | |
| static int | |
| remove_redundant_nops(cfg_builder *g) { | |
| int changes = 0; | |
| for (basicblock *b = g->g_entryblock; b != NULL; b = b->b_next) { | |
| int change = basicblock_remove_redundant_nops(b); | |
| RETURN_IF_ERROR(change); | |
| changes += change; | |
| } | |
| return changes; | |
| } | |
| static int | |
| remove_redundant_nops_and_pairs(basicblock *entryblock) | |
| { | |
| bool done = false; | |
| while (! done) { | |
| done = true; | |
| cfg_instr *prev_instr = NULL; | |
| cfg_instr *instr = NULL; | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| RETURN_IF_ERROR(basicblock_remove_redundant_nops(b)); | |
| if (IS_LABEL(b->b_label)) { | |
| /* this block is a jump target, forget instr */ | |
| instr = NULL; | |
| } | |
| for (int i = 0; i < b->b_iused; i++) { | |
| prev_instr = instr; | |
| instr = &b->b_instr[i]; | |
| int prev_opcode = prev_instr ? prev_instr->i_opcode : 0; | |
| int prev_oparg = prev_instr ? prev_instr->i_oparg : 0; | |
| int opcode = instr->i_opcode; | |
| bool is_redundant_pair = false; | |
| if (opcode == POP_TOP) { | |
| if (prev_opcode == LOAD_CONST) { | |
| is_redundant_pair = true; | |
| } | |
| else if (prev_opcode == COPY && prev_oparg == 1) { | |
| is_redundant_pair = true; | |
| } | |
| } | |
| if (is_redundant_pair) { | |
| INSTR_SET_OP0(prev_instr, NOP); | |
| INSTR_SET_OP0(instr, NOP); | |
| done = false; | |
| } | |
| } | |
| if ((instr && is_jump(instr)) || !BB_HAS_FALLTHROUGH(b)) { | |
| instr = NULL; | |
| } | |
| } | |
| } | |
| return SUCCESS; | |
| } | |
| static int | |
| remove_redundant_jumps(cfg_builder *g) { | |
| /* If a non-empty block ends with a jump instruction, check if the next | |
| * non-empty block reached through normal flow control is the target | |
| * of that jump. If it is, then the jump instruction is redundant and | |
| * can be deleted. | |
| * | |
| * Return the number of changes applied, or -1 on error. | |
| */ | |
| int changes = 0; | |
| for (basicblock *b = g->g_entryblock; b != NULL; b = b->b_next) { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| if (last == NULL) { | |
| continue; | |
| } | |
| assert(!IS_ASSEMBLER_OPCODE(last->i_opcode)); | |
| if (IS_UNCONDITIONAL_JUMP_OPCODE(last->i_opcode)) { | |
| basicblock* jump_target = next_nonempty_block(last->i_target); | |
| if (jump_target == NULL) { | |
| PyErr_SetString(PyExc_SystemError, "jump with NULL target"); | |
| return ERROR; | |
| } | |
| basicblock *next = next_nonempty_block(b->b_next); | |
| if (jump_target == next) { | |
| changes++; | |
| INSTR_SET_OP0(last, NOP); | |
| } | |
| } | |
| } | |
| return changes; | |
| } | |
| static inline bool | |
| basicblock_has_no_lineno(basicblock *b) { | |
| for (int i = 0; i < b->b_iused; i++) { | |
| if (b->b_instr[i].i_loc.lineno >= 0) { | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| /* Maximum size of basic block that should be copied in optimizer */ | |
| #define MAX_COPY_SIZE 4 | |
| /* If this block ends with an unconditional jump to a small exit block or | |
| * a block that has no line numbers (and no fallthrough), then | |
| * remove the jump and extend this block with the target. | |
| * Returns 1 if extended, 0 if no change, and -1 on error. | |
| */ | |
| static int | |
| basicblock_inline_small_or_no_lineno_blocks(basicblock *bb) { | |
| cfg_instr *last = basicblock_last_instr(bb); | |
| if (last == NULL) { | |
| return 0; | |
| } | |
| if (!IS_UNCONDITIONAL_JUMP_OPCODE(last->i_opcode)) { | |
| return 0; | |
| } | |
| basicblock *target = last->i_target; | |
| bool small_exit_block = (basicblock_exits_scope(target) && | |
| target->b_iused <= MAX_COPY_SIZE); | |
| bool no_lineno_no_fallthrough = (basicblock_has_no_lineno(target) && | |
| !BB_HAS_FALLTHROUGH(target)); | |
| if (small_exit_block || no_lineno_no_fallthrough) { | |
| assert(is_jump(last)); | |
| int removed_jump_opcode = last->i_opcode; | |
| INSTR_SET_OP0(last, NOP); | |
| RETURN_IF_ERROR(basicblock_append_instructions(bb, target)); | |
| if (no_lineno_no_fallthrough) { | |
| last = basicblock_last_instr(bb); | |
| if (IS_UNCONDITIONAL_JUMP_OPCODE(last->i_opcode) && | |
| removed_jump_opcode == JUMP) | |
| { | |
| /* Make sure we don't lose eval breaker checks */ | |
| last->i_opcode = JUMP; | |
| } | |
| } | |
| target->b_predecessors--; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int | |
| inline_small_or_no_lineno_blocks(basicblock *entryblock) { | |
| bool changes; | |
| do { | |
| changes = false; | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| int res = basicblock_inline_small_or_no_lineno_blocks(b); | |
| RETURN_IF_ERROR(res); | |
| if (res) { | |
| changes = true; | |
| } | |
| } | |
| } while(changes); /* every change removes a jump, ensuring convergence */ | |
| return changes; | |
| } | |
| // Attempt to eliminate jumps to jumps by updating inst to jump to | |
| // target->i_target using the provided opcode. Return whether or not the | |
| // optimization was successful. | |
| static bool | |
| jump_thread(basicblock *bb, cfg_instr *inst, cfg_instr *target, int opcode) | |
| { | |
| assert(is_jump(inst)); | |
| assert(is_jump(target)); | |
| assert(inst == basicblock_last_instr(bb)); | |
| // bpo-45773: If inst->i_target == target->i_target, then nothing actually | |
| // changes (and we fall into an infinite loop): | |
| if (inst->i_target != target->i_target) { | |
| /* Change inst to NOP and append a jump to target->i_target. The | |
| * NOP will be removed later if it's not needed for the lineno. | |
| */ | |
| INSTR_SET_OP0(inst, NOP); | |
| RETURN_IF_ERROR( | |
| basicblock_add_jump( | |
| bb, opcode, target->i_target, target->i_loc)); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static PyObject* | |
| get_const_value(int opcode, int oparg, PyObject *co_consts) | |
| { | |
| PyObject *constant = NULL; | |
| assert(OPCODE_HAS_CONST(opcode)); | |
| if (opcode == LOAD_CONST) { | |
| constant = PyList_GET_ITEM(co_consts, oparg); | |
| } | |
| if (constant == NULL) { | |
| PyErr_SetString(PyExc_SystemError, | |
| "Internal error: failed to get value of a constant"); | |
| return NULL; | |
| } | |
| return Py_NewRef(constant); | |
| } | |
| // Steals a reference to newconst. | |
| static int | |
| add_const(PyObject *newconst, PyObject *consts, PyObject *const_cache) | |
| { | |
| if (_PyCompile_ConstCacheMergeOne(const_cache, &newconst) < 0) { | |
| Py_DECREF(newconst); | |
| return -1; | |
| } | |
| Py_ssize_t index; | |
| for (index = 0; index < PyList_GET_SIZE(consts); index++) { | |
| if (PyList_GET_ITEM(consts, index) == newconst) { | |
| break; | |
| } | |
| } | |
| if (index == PyList_GET_SIZE(consts)) { | |
| if ((size_t)index >= (size_t)INT_MAX - 1) { | |
| PyErr_SetString(PyExc_OverflowError, "too many constants"); | |
| Py_DECREF(newconst); | |
| return -1; | |
| } | |
| if (PyList_Append(consts, newconst)) { | |
| Py_DECREF(newconst); | |
| return -1; | |
| } | |
| } | |
| Py_DECREF(newconst); | |
| return (int)index; | |
| } | |
| /* Replace LOAD_CONST c1, LOAD_CONST c2 ... LOAD_CONST cn, BUILD_TUPLE n | |
| with LOAD_CONST (c1, c2, ... cn). | |
| The consts table must still be in list form so that the | |
| new constant (c1, c2, ... cn) can be appended. | |
| Called with codestr pointing to the first LOAD_CONST. | |
| */ | |
| static int | |
| fold_tuple_on_constants(PyObject *const_cache, | |
| cfg_instr *inst, | |
| int n, PyObject *consts) | |
| { | |
| /* Pre-conditions */ | |
| assert(PyDict_CheckExact(const_cache)); | |
| assert(PyList_CheckExact(consts)); | |
| assert(inst[n].i_opcode == BUILD_TUPLE); | |
| assert(inst[n].i_oparg == n); | |
| for (int i = 0; i < n; i++) { | |
| if (!OPCODE_HAS_CONST(inst[i].i_opcode)) { | |
| return SUCCESS; | |
| } | |
| } | |
| /* Buildup new tuple of constants */ | |
| PyObject *newconst = PyTuple_New(n); | |
| if (newconst == NULL) { | |
| return ERROR; | |
| } | |
| for (int i = 0; i < n; i++) { | |
| int op = inst[i].i_opcode; | |
| int arg = inst[i].i_oparg; | |
| PyObject *constant = get_const_value(op, arg, consts); | |
| if (constant == NULL) { | |
| return ERROR; | |
| } | |
| PyTuple_SET_ITEM(newconst, i, constant); | |
| } | |
| int index = add_const(newconst, consts, const_cache); | |
| if (index < 0) { | |
| return ERROR; | |
| } | |
| for (int i = 0; i < n; i++) { | |
| INSTR_SET_OP0(&inst[i], NOP); | |
| } | |
| INSTR_SET_OP1(&inst[n], LOAD_CONST, index); | |
| return SUCCESS; | |
| } | |
| #define VISITED (-1) | |
| // Replace an arbitrary run of SWAPs and NOPs with an optimal one that has the | |
| // same effect. | |
| static int | |
| swaptimize(basicblock *block, int *ix) | |
| { | |
| // NOTE: "./python -m test test_patma" serves as a good, quick stress test | |
| // for this function. Make sure to blow away cached *.pyc files first! | |
| assert(*ix < block->b_iused); | |
| cfg_instr *instructions = &block->b_instr[*ix]; | |
| // Find the length of the current sequence of SWAPs and NOPs, and record the | |
| // maximum depth of the stack manipulations: | |
| assert(instructions[0].i_opcode == SWAP); | |
| int depth = instructions[0].i_oparg; | |
| int len = 0; | |
| int more = false; | |
| int limit = block->b_iused - *ix; | |
| while (++len < limit) { | |
| int opcode = instructions[len].i_opcode; | |
| if (opcode == SWAP) { | |
| depth = Py_MAX(depth, instructions[len].i_oparg); | |
| more = true; | |
| } | |
| else if (opcode != NOP) { | |
| break; | |
| } | |
| } | |
| // It's already optimal if there's only one SWAP: | |
| if (!more) { | |
| return SUCCESS; | |
| } | |
| // Create an array with elements {0, 1, 2, ..., depth - 1}: | |
| int *stack = PyMem_Malloc(depth * sizeof(int)); | |
| if (stack == NULL) { | |
| PyErr_NoMemory(); | |
| return ERROR; | |
| } | |
| for (int i = 0; i < depth; i++) { | |
| stack[i] = i; | |
| } | |
| // Simulate the combined effect of these instructions by "running" them on | |
| // our "stack": | |
| for (int i = 0; i < len; i++) { | |
| if (instructions[i].i_opcode == SWAP) { | |
| int oparg = instructions[i].i_oparg; | |
| int top = stack[0]; | |
| // SWAPs are 1-indexed: | |
| stack[0] = stack[oparg - 1]; | |
| stack[oparg - 1] = top; | |
| } | |
| } | |
| // Now we can begin! Our approach here is based on a solution to a closely | |
| // related problem (https://cs.stackexchange.com/a/13938). It's easiest to | |
| // think of this algorithm as determining the steps needed to efficiently | |
| // "un-shuffle" our stack. By performing the moves in *reverse* order, | |
| // though, we can efficiently *shuffle* it! For this reason, we will be | |
| // replacing instructions starting from the *end* of the run. Since the | |
| // solution is optimal, we don't need to worry about running out of space: | |
| int current = len - 1; | |
| for (int i = 0; i < depth; i++) { | |
| // Skip items that have already been visited, or just happen to be in | |
| // the correct location: | |
| if (stack[i] == VISITED || stack[i] == i) { | |
| continue; | |
| } | |
| // Okay, we've found an item that hasn't been visited. It forms a cycle | |
| // with other items; traversing the cycle and swapping each item with | |
| // the next will put them all in the correct place. The weird | |
| // loop-and-a-half is necessary to insert 0 into every cycle, since we | |
| // can only swap from that position: | |
| int j = i; | |
| while (true) { | |
| // Skip the actual swap if our item is zero, since swapping the top | |
| // item with itself is pointless: | |
| if (j) { | |
| assert(0 <= current); | |
| // SWAPs are 1-indexed: | |
| instructions[current].i_opcode = SWAP; | |
| instructions[current--].i_oparg = j + 1; | |
| } | |
| if (stack[j] == VISITED) { | |
| // Completed the cycle: | |
| assert(j == i); | |
| break; | |
| } | |
| int next_j = stack[j]; | |
| stack[j] = VISITED; | |
| j = next_j; | |
| } | |
| } | |
| // NOP out any unused instructions: | |
| while (0 <= current) { | |
| INSTR_SET_OP0(&instructions[current--], NOP); | |
| } | |
| PyMem_Free(stack); | |
| *ix += len - 1; | |
| return SUCCESS; | |
| } | |
| // This list is pretty small, since it's only okay to reorder opcodes that: | |
| // - can't affect control flow (like jumping or raising exceptions) | |
| // - can't invoke arbitrary code (besides finalizers) | |
| // - only touch the TOS (and pop it when finished) | |
| #define SWAPPABLE(opcode) \ | |
| ((opcode) == STORE_FAST || \ | |
| (opcode) == STORE_FAST_MAYBE_NULL || \ | |
| (opcode) == POP_TOP) | |
| #define STORES_TO(instr) \ | |
| (((instr).i_opcode == STORE_FAST || \ | |
| (instr).i_opcode == STORE_FAST_MAYBE_NULL) \ | |
| ? (instr).i_oparg : -1) | |
| static int | |
| next_swappable_instruction(basicblock *block, int i, int lineno) | |
| { | |
| while (++i < block->b_iused) { | |
| cfg_instr *instruction = &block->b_instr[i]; | |
| if (0 <= lineno && instruction->i_loc.lineno != lineno) { | |
| // Optimizing across this instruction could cause user-visible | |
| // changes in the names bound between line tracing events! | |
| return -1; | |
| } | |
| if (instruction->i_opcode == NOP) { | |
| continue; | |
| } | |
| if (SWAPPABLE(instruction->i_opcode)) { | |
| return i; | |
| } | |
| return -1; | |
| } | |
| return -1; | |
| } | |
| // Attempt to apply SWAPs statically by swapping *instructions* rather than | |
| // stack items. For example, we can replace SWAP(2), POP_TOP, STORE_FAST(42) | |
| // with the more efficient NOP, STORE_FAST(42), POP_TOP. | |
| static void | |
| apply_static_swaps(basicblock *block, int i) | |
| { | |
| // SWAPs are to our left, and potential swaperands are to our right: | |
| for (; 0 <= i; i--) { | |
| assert(i < block->b_iused); | |
| cfg_instr *swap = &block->b_instr[i]; | |
| if (swap->i_opcode != SWAP) { | |
| if (swap->i_opcode == NOP || SWAPPABLE(swap->i_opcode)) { | |
| // Nope, but we know how to handle these. Keep looking: | |
| continue; | |
| } | |
| // We can't reason about what this instruction does. Bail: | |
| return; | |
| } | |
| int j = next_swappable_instruction(block, i, -1); | |
| if (j < 0) { | |
| return; | |
| } | |
| int k = j; | |
| int lineno = block->b_instr[j].i_loc.lineno; | |
| for (int count = swap->i_oparg - 1; 0 < count; count--) { | |
| k = next_swappable_instruction(block, k, lineno); | |
| if (k < 0) { | |
| return; | |
| } | |
| } | |
| // The reordering is not safe if the two instructions to be swapped | |
| // store to the same location, or if any intervening instruction stores | |
| // to the same location as either of them. | |
| int store_j = STORES_TO(block->b_instr[j]); | |
| int store_k = STORES_TO(block->b_instr[k]); | |
| if (store_j >= 0 || store_k >= 0) { | |
| if (store_j == store_k) { | |
| return; | |
| } | |
| for (int idx = j + 1; idx < k; idx++) { | |
| int store_idx = STORES_TO(block->b_instr[idx]); | |
| if (store_idx >= 0 && (store_idx == store_j || store_idx == store_k)) { | |
| return; | |
| } | |
| } | |
| } | |
| // Success! | |
| INSTR_SET_OP0(swap, NOP); | |
| cfg_instr temp = block->b_instr[j]; | |
| block->b_instr[j] = block->b_instr[k]; | |
| block->b_instr[k] = temp; | |
| } | |
| } | |
| static int | |
| basicblock_optimize_load_const(PyObject *const_cache, basicblock *bb, PyObject *consts) | |
| { | |
| assert(PyDict_CheckExact(const_cache)); | |
| assert(PyList_CheckExact(consts)); | |
| int opcode = 0; | |
| int oparg = 0; | |
| for (int i = 0; i < bb->b_iused; i++) { | |
| cfg_instr *inst = &bb->b_instr[i]; | |
| bool is_copy_of_load_const = (opcode == LOAD_CONST && | |
| inst->i_opcode == COPY && | |
| inst->i_oparg == 1); | |
| if (! is_copy_of_load_const) { | |
| opcode = inst->i_opcode; | |
| oparg = inst->i_oparg; | |
| } | |
| assert(!IS_ASSEMBLER_OPCODE(opcode)); | |
| if (opcode != LOAD_CONST) { | |
| continue; | |
| } | |
| int nextop = i+1 < bb->b_iused ? bb->b_instr[i+1].i_opcode : 0; | |
| switch(nextop) { | |
| case POP_JUMP_IF_FALSE: | |
| case POP_JUMP_IF_TRUE: | |
| { | |
| /* Remove LOAD_CONST const; conditional jump */ | |
| PyObject* cnt = get_const_value(opcode, oparg, consts); | |
| if (cnt == NULL) { | |
| return ERROR; | |
| } | |
| int is_true = PyObject_IsTrue(cnt); | |
| Py_DECREF(cnt); | |
| if (is_true == -1) { | |
| return ERROR; | |
| } | |
| INSTR_SET_OP0(inst, NOP); | |
| int jump_if_true = nextop == POP_JUMP_IF_TRUE; | |
| if (is_true == jump_if_true) { | |
| bb->b_instr[i+1].i_opcode = JUMP; | |
| } | |
| else { | |
| INSTR_SET_OP0(&bb->b_instr[i + 1], NOP); | |
| } | |
| break; | |
| } | |
| case IS_OP: | |
| { | |
| // Fold to POP_JUMP_IF_NONE: | |
| // - LOAD_CONST(None) IS_OP(0) POP_JUMP_IF_TRUE | |
| // - LOAD_CONST(None) IS_OP(1) POP_JUMP_IF_FALSE | |
| // - LOAD_CONST(None) IS_OP(0) TO_BOOL POP_JUMP_IF_TRUE | |
| // - LOAD_CONST(None) IS_OP(1) TO_BOOL POP_JUMP_IF_FALSE | |
| // Fold to POP_JUMP_IF_NOT_NONE: | |
| // - LOAD_CONST(None) IS_OP(0) POP_JUMP_IF_FALSE | |
| // - LOAD_CONST(None) IS_OP(1) POP_JUMP_IF_TRUE | |
| // - LOAD_CONST(None) IS_OP(0) TO_BOOL POP_JUMP_IF_FALSE | |
| // - LOAD_CONST(None) IS_OP(1) TO_BOOL POP_JUMP_IF_TRUE | |
| PyObject *cnt = get_const_value(opcode, oparg, consts); | |
| if (cnt == NULL) { | |
| return ERROR; | |
| } | |
| if (!Py_IsNone(cnt)) { | |
| Py_DECREF(cnt); | |
| break; | |
| } | |
| if (bb->b_iused <= i + 2) { | |
| break; | |
| } | |
| cfg_instr *is_instr = &bb->b_instr[i + 1]; | |
| cfg_instr *jump_instr = &bb->b_instr[i + 2]; | |
| // Get rid of TO_BOOL regardless: | |
| if (jump_instr->i_opcode == TO_BOOL) { | |
| INSTR_SET_OP0(jump_instr, NOP); | |
| if (bb->b_iused <= i + 3) { | |
| break; | |
| } | |
| jump_instr = &bb->b_instr[i + 3]; | |
| } | |
| bool invert = is_instr->i_oparg; | |
| if (jump_instr->i_opcode == POP_JUMP_IF_FALSE) { | |
| invert = !invert; | |
| } | |
| else if (jump_instr->i_opcode != POP_JUMP_IF_TRUE) { | |
| break; | |
| } | |
| INSTR_SET_OP0(inst, NOP); | |
| INSTR_SET_OP0(is_instr, NOP); | |
| jump_instr->i_opcode = invert ? POP_JUMP_IF_NOT_NONE | |
| : POP_JUMP_IF_NONE; | |
| break; | |
| } | |
| case RETURN_VALUE: | |
| { | |
| INSTR_SET_OP0(inst, NOP); | |
| INSTR_SET_OP1(&bb->b_instr[++i], RETURN_CONST, oparg); | |
| break; | |
| } | |
| case TO_BOOL: | |
| { | |
| PyObject *cnt = get_const_value(opcode, oparg, consts); | |
| if (cnt == NULL) { | |
| return ERROR; | |
| } | |
| int is_true = PyObject_IsTrue(cnt); | |
| Py_DECREF(cnt); | |
| if (is_true == -1) { | |
| return ERROR; | |
| } | |
| cnt = PyBool_FromLong(is_true); | |
| int index = add_const(cnt, consts, const_cache); | |
| if (index < 0) { | |
| return ERROR; | |
| } | |
| INSTR_SET_OP0(inst, NOP); | |
| INSTR_SET_OP1(&bb->b_instr[i + 1], LOAD_CONST, index); | |
| break; | |
| } | |
| } | |
| } | |
| return SUCCESS; | |
| } | |
| static int | |
| optimize_load_const(PyObject *const_cache, cfg_builder *g, PyObject *consts) { | |
| for (basicblock *b = g->g_entryblock; b != NULL; b = b->b_next) { | |
| RETURN_IF_ERROR(basicblock_optimize_load_const(const_cache, b, consts)); | |
| } | |
| return SUCCESS; | |
| } | |
| static int | |
| optimize_basic_block(PyObject *const_cache, basicblock *bb, PyObject *consts) | |
| { | |
| assert(PyDict_CheckExact(const_cache)); | |
| assert(PyList_CheckExact(consts)); | |
| cfg_instr nop; | |
| INSTR_SET_OP0(&nop, NOP); | |
| for (int i = 0; i < bb->b_iused; i++) { | |
| cfg_instr *inst = &bb->b_instr[i]; | |
| cfg_instr *target; | |
| int opcode = inst->i_opcode; | |
| int oparg = inst->i_oparg; | |
| if (HAS_TARGET(opcode)) { | |
| assert(inst->i_target->b_iused > 0); | |
| target = &inst->i_target->b_instr[0]; | |
| assert(!IS_ASSEMBLER_OPCODE(target->i_opcode)); | |
| } | |
| else { | |
| target = &nop; | |
| } | |
| int nextop = i+1 < bb->b_iused ? bb->b_instr[i+1].i_opcode : 0; | |
| assert(!IS_ASSEMBLER_OPCODE(opcode)); | |
| switch (opcode) { | |
| /* Try to fold tuples of constants. | |
| Skip over BUILD_TUPLE(1) UNPACK_SEQUENCE(1). | |
| Replace BUILD_TUPLE(2) UNPACK_SEQUENCE(2) with SWAP(2). | |
| Replace BUILD_TUPLE(3) UNPACK_SEQUENCE(3) with SWAP(3). */ | |
| case BUILD_TUPLE: | |
| if (nextop == UNPACK_SEQUENCE && oparg == bb->b_instr[i+1].i_oparg) { | |
| switch(oparg) { | |
| case 1: | |
| INSTR_SET_OP0(inst, NOP); | |
| INSTR_SET_OP0(&bb->b_instr[i + 1], NOP); | |
| continue; | |
| case 2: | |
| case 3: | |
| INSTR_SET_OP0(inst, NOP); | |
| bb->b_instr[i+1].i_opcode = SWAP; | |
| continue; | |
| } | |
| } | |
| if (i >= oparg) { | |
| if (fold_tuple_on_constants(const_cache, inst-oparg, oparg, consts)) { | |
| goto error; | |
| } | |
| } | |
| break; | |
| case POP_JUMP_IF_NOT_NONE: | |
| case POP_JUMP_IF_NONE: | |
| switch (target->i_opcode) { | |
| case JUMP: | |
| i -= jump_thread(bb, inst, target, inst->i_opcode); | |
| } | |
| break; | |
| case POP_JUMP_IF_FALSE: | |
| switch (target->i_opcode) { | |
| case JUMP: | |
| i -= jump_thread(bb, inst, target, POP_JUMP_IF_FALSE); | |
| } | |
| break; | |
| case POP_JUMP_IF_TRUE: | |
| switch (target->i_opcode) { | |
| case JUMP: | |
| i -= jump_thread(bb, inst, target, POP_JUMP_IF_TRUE); | |
| } | |
| break; | |
| case JUMP: | |
| case JUMP_NO_INTERRUPT: | |
| switch (target->i_opcode) { | |
| case JUMP: | |
| i -= jump_thread(bb, inst, target, JUMP); | |
| continue; | |
| case JUMP_NO_INTERRUPT: | |
| i -= jump_thread(bb, inst, target, opcode); | |
| continue; | |
| } | |
| break; | |
| case FOR_ITER: | |
| if (target->i_opcode == JUMP) { | |
| /* This will not work now because the jump (at target) could | |
| * be forward or backward and FOR_ITER only jumps forward. We | |
| * can re-enable this if ever we implement a backward version | |
| * of FOR_ITER. | |
| */ | |
| /* | |
| i -= jump_thread(bb, inst, target, FOR_ITER); | |
| */ | |
| } | |
| break; | |
| case STORE_FAST: | |
| if (opcode == nextop && | |
| oparg == bb->b_instr[i+1].i_oparg && | |
| bb->b_instr[i].i_loc.lineno == bb->b_instr[i+1].i_loc.lineno) { | |
| bb->b_instr[i].i_opcode = POP_TOP; | |
| bb->b_instr[i].i_oparg = 0; | |
| } | |
| break; | |
| case SWAP: | |
| if (oparg == 1) { | |
| INSTR_SET_OP0(inst, NOP); | |
| } | |
| break; | |
| case LOAD_GLOBAL: | |
| if (nextop == PUSH_NULL && (oparg & 1) == 0) { | |
| INSTR_SET_OP1(inst, LOAD_GLOBAL, oparg | 1); | |
| INSTR_SET_OP0(&bb->b_instr[i + 1], NOP); | |
| } | |
| break; | |
| case COMPARE_OP: | |
| if (nextop == TO_BOOL) { | |
| INSTR_SET_OP0(inst, NOP); | |
| INSTR_SET_OP1(&bb->b_instr[i + 1], COMPARE_OP, oparg | 16); | |
| continue; | |
| } | |
| break; | |
| case CONTAINS_OP: | |
| case IS_OP: | |
| if (nextop == TO_BOOL) { | |
| INSTR_SET_OP0(inst, NOP); | |
| INSTR_SET_OP1(&bb->b_instr[i + 1], opcode, oparg); | |
| continue; | |
| } | |
| break; | |
| case TO_BOOL: | |
| if (nextop == TO_BOOL) { | |
| INSTR_SET_OP0(inst, NOP); | |
| continue; | |
| } | |
| break; | |
| case UNARY_NOT: | |
| if (nextop == TO_BOOL) { | |
| INSTR_SET_OP0(inst, NOP); | |
| INSTR_SET_OP0(&bb->b_instr[i + 1], UNARY_NOT); | |
| continue; | |
| } | |
| if (nextop == UNARY_NOT) { | |
| INSTR_SET_OP0(inst, NOP); | |
| INSTR_SET_OP0(&bb->b_instr[i + 1], NOP); | |
| continue; | |
| } | |
| break; | |
| } | |
| } | |
| for (int i = 0; i < bb->b_iused; i++) { | |
| cfg_instr *inst = &bb->b_instr[i]; | |
| if (inst->i_opcode == SWAP) { | |
| if (swaptimize(bb, &i) < 0) { | |
| goto error; | |
| } | |
| apply_static_swaps(bb, i); | |
| } | |
| } | |
| return SUCCESS; | |
| error: | |
| return ERROR; | |
| } | |
| static int resolve_line_numbers(cfg_builder *g, int firstlineno); | |
| static int | |
| remove_redundant_nops_and_jumps(cfg_builder *g) | |
| { | |
| int removed_nops, removed_jumps; | |
| do { | |
| /* Convergence is guaranteed because the number of | |
| * redundant jumps and nops only decreases. | |
| */ | |
| removed_nops = remove_redundant_nops(g); | |
| RETURN_IF_ERROR(removed_nops); | |
| removed_jumps = remove_redundant_jumps(g); | |
| RETURN_IF_ERROR(removed_jumps); | |
| } while(removed_nops + removed_jumps > 0); | |
| return SUCCESS; | |
| } | |
| /* Perform optimizations on a control flow graph. | |
| The consts object should still be in list form to allow new constants | |
| to be appended. | |
| Code trasnformations that reduce code size initially fill the gaps with | |
| NOPs. Later those NOPs are removed. | |
| */ | |
| static int | |
| optimize_cfg(cfg_builder *g, PyObject *consts, PyObject *const_cache, int firstlineno) | |
| { | |
| assert(PyDict_CheckExact(const_cache)); | |
| RETURN_IF_ERROR(check_cfg(g)); | |
| RETURN_IF_ERROR(inline_small_or_no_lineno_blocks(g->g_entryblock)); | |
| RETURN_IF_ERROR(remove_unreachable(g->g_entryblock)); | |
| RETURN_IF_ERROR(resolve_line_numbers(g, firstlineno)); | |
| RETURN_IF_ERROR(optimize_load_const(const_cache, g, consts)); | |
| for (basicblock *b = g->g_entryblock; b != NULL; b = b->b_next) { | |
| RETURN_IF_ERROR(optimize_basic_block(const_cache, b, consts)); | |
| } | |
| RETURN_IF_ERROR(remove_redundant_nops_and_pairs(g->g_entryblock)); | |
| RETURN_IF_ERROR(remove_unreachable(g->g_entryblock)); | |
| RETURN_IF_ERROR(remove_redundant_nops_and_jumps(g)); | |
| assert(no_redundant_jumps(g)); | |
| return SUCCESS; | |
| } | |
| static void | |
| make_super_instruction(cfg_instr *inst1, cfg_instr *inst2, int super_op) | |
| { | |
| int32_t line1 = inst1->i_loc.lineno; | |
| int32_t line2 = inst2->i_loc.lineno; | |
| /* Skip if instructions are on different lines */ | |
| if (line1 >= 0 && line2 >= 0 && line1 != line2) { | |
| return; | |
| } | |
| if (inst1->i_oparg >= 16 || inst2->i_oparg >= 16) { | |
| return; | |
| } | |
| INSTR_SET_OP1(inst1, super_op, (inst1->i_oparg << 4) | inst2->i_oparg); | |
| INSTR_SET_OP0(inst2, NOP); | |
| } | |
| static int | |
| insert_superinstructions(cfg_builder *g) | |
| { | |
| for (basicblock *b = g->g_entryblock; b != NULL; b = b->b_next) { | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *inst = &b->b_instr[i]; | |
| int nextop = i+1 < b->b_iused ? b->b_instr[i+1].i_opcode : 0; | |
| switch(inst->i_opcode) { | |
| case LOAD_FAST: | |
| if (nextop == LOAD_FAST) { | |
| make_super_instruction(inst, &b->b_instr[i + 1], LOAD_FAST_LOAD_FAST); | |
| } | |
| break; | |
| case STORE_FAST: | |
| switch (nextop) { | |
| case LOAD_FAST: | |
| make_super_instruction(inst, &b->b_instr[i + 1], STORE_FAST_LOAD_FAST); | |
| break; | |
| case STORE_FAST: | |
| make_super_instruction(inst, &b->b_instr[i + 1], STORE_FAST_STORE_FAST); | |
| break; | |
| } | |
| break; | |
| } | |
| } | |
| } | |
| int res = remove_redundant_nops(g); | |
| assert(no_redundant_nops(g)); | |
| return res; | |
| } | |
| // helper functions for add_checks_for_loads_of_unknown_variables | |
| static inline void | |
| maybe_push(basicblock *b, uint64_t unsafe_mask, basicblock ***sp) | |
| { | |
| // Push b if the unsafe mask is giving us any new information. | |
| // To avoid overflowing the stack, only allow each block once. | |
| // Use b->b_visited=1 to mean that b is currently on the stack. | |
| uint64_t both = b->b_unsafe_locals_mask | unsafe_mask; | |
| if (b->b_unsafe_locals_mask != both) { | |
| b->b_unsafe_locals_mask = both; | |
| // More work left to do. | |
| if (!b->b_visited) { | |
| // not on the stack, so push it. | |
| *(*sp)++ = b; | |
| b->b_visited = 1; | |
| } | |
| } | |
| } | |
| static void | |
| scan_block_for_locals(basicblock *b, basicblock ***sp) | |
| { | |
| // bit i is set if local i is potentially uninitialized | |
| uint64_t unsafe_mask = b->b_unsafe_locals_mask; | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| assert(instr->i_opcode != EXTENDED_ARG); | |
| if (instr->i_except != NULL) { | |
| maybe_push(instr->i_except, unsafe_mask, sp); | |
| } | |
| if (instr->i_oparg >= 64) { | |
| continue; | |
| } | |
| assert(instr->i_oparg >= 0); | |
| uint64_t bit = (uint64_t)1 << instr->i_oparg; | |
| switch (instr->i_opcode) { | |
| case DELETE_FAST: | |
| case LOAD_FAST_AND_CLEAR: | |
| case STORE_FAST_MAYBE_NULL: | |
| unsafe_mask |= bit; | |
| break; | |
| case STORE_FAST: | |
| unsafe_mask &= ~bit; | |
| break; | |
| case LOAD_FAST_CHECK: | |
| // If this doesn't raise, then the local is defined. | |
| unsafe_mask &= ~bit; | |
| break; | |
| case LOAD_FAST: | |
| if (unsafe_mask & bit) { | |
| instr->i_opcode = LOAD_FAST_CHECK; | |
| } | |
| unsafe_mask &= ~bit; | |
| break; | |
| } | |
| } | |
| if (b->b_next && BB_HAS_FALLTHROUGH(b)) { | |
| maybe_push(b->b_next, unsafe_mask, sp); | |
| } | |
| cfg_instr *last = basicblock_last_instr(b); | |
| if (last && is_jump(last)) { | |
| assert(last->i_target != NULL); | |
| maybe_push(last->i_target, unsafe_mask, sp); | |
| } | |
| } | |
| static int | |
| fast_scan_many_locals(basicblock *entryblock, int nlocals) | |
| { | |
| assert(nlocals > 64); | |
| Py_ssize_t *states = PyMem_Calloc(nlocals - 64, sizeof(Py_ssize_t)); | |
| if (states == NULL) { | |
| PyErr_NoMemory(); | |
| return ERROR; | |
| } | |
| Py_ssize_t blocknum = 0; | |
| // state[i - 64] == blocknum if local i is guaranteed to | |
| // be initialized, i.e., if it has had a previous LOAD_FAST or | |
| // STORE_FAST within that basicblock (not followed by | |
| // DELETE_FAST/LOAD_FAST_AND_CLEAR/STORE_FAST_MAYBE_NULL). | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| blocknum++; | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| assert(instr->i_opcode != EXTENDED_ARG); | |
| int arg = instr->i_oparg; | |
| if (arg < 64) { | |
| continue; | |
| } | |
| assert(arg >= 0); | |
| switch (instr->i_opcode) { | |
| case DELETE_FAST: | |
| case LOAD_FAST_AND_CLEAR: | |
| case STORE_FAST_MAYBE_NULL: | |
| states[arg - 64] = blocknum - 1; | |
| break; | |
| case STORE_FAST: | |
| states[arg - 64] = blocknum; | |
| break; | |
| case LOAD_FAST: | |
| if (states[arg - 64] != blocknum) { | |
| instr->i_opcode = LOAD_FAST_CHECK; | |
| } | |
| states[arg - 64] = blocknum; | |
| break; | |
| Py_UNREACHABLE(); | |
| } | |
| } | |
| } | |
| PyMem_Free(states); | |
| return SUCCESS; | |
| } | |
| static int | |
| remove_unused_consts(basicblock *entryblock, PyObject *consts) | |
| { | |
| assert(PyList_CheckExact(consts)); | |
| Py_ssize_t nconsts = PyList_GET_SIZE(consts); | |
| if (nconsts == 0) { | |
| return SUCCESS; /* nothing to do */ | |
| } | |
| Py_ssize_t *index_map = NULL; | |
| Py_ssize_t *reverse_index_map = NULL; | |
| int err = ERROR; | |
| index_map = PyMem_Malloc(nconsts * sizeof(Py_ssize_t)); | |
| if (index_map == NULL) { | |
| goto end; | |
| } | |
| for (Py_ssize_t i = 1; i < nconsts; i++) { | |
| index_map[i] = -1; | |
| } | |
| // The first constant may be docstring; keep it always. | |
| index_map[0] = 0; | |
| /* mark used consts */ | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| for (int i = 0; i < b->b_iused; i++) { | |
| if (OPCODE_HAS_CONST(b->b_instr[i].i_opcode)) { | |
| int index = b->b_instr[i].i_oparg; | |
| index_map[index] = index; | |
| } | |
| } | |
| } | |
| /* now index_map[i] == i if consts[i] is used, -1 otherwise */ | |
| /* condense consts */ | |
| Py_ssize_t n_used_consts = 0; | |
| for (int i = 0; i < nconsts; i++) { | |
| if (index_map[i] != -1) { | |
| assert(index_map[i] == i); | |
| index_map[n_used_consts++] = index_map[i]; | |
| } | |
| } | |
| if (n_used_consts == nconsts) { | |
| /* nothing to do */ | |
| err = SUCCESS; | |
| goto end; | |
| } | |
| /* move all used consts to the beginning of the consts list */ | |
| assert(n_used_consts < nconsts); | |
| for (Py_ssize_t i = 0; i < n_used_consts; i++) { | |
| Py_ssize_t old_index = index_map[i]; | |
| assert(i <= old_index && old_index < nconsts); | |
| if (i != old_index) { | |
| PyObject *value = PyList_GET_ITEM(consts, index_map[i]); | |
| assert(value != NULL); | |
| PyList_SetItem(consts, i, Py_NewRef(value)); | |
| } | |
| } | |
| /* truncate the consts list at its new size */ | |
| if (PyList_SetSlice(consts, n_used_consts, nconsts, NULL) < 0) { | |
| goto end; | |
| } | |
| /* adjust const indices in the bytecode */ | |
| reverse_index_map = PyMem_Malloc(nconsts * sizeof(Py_ssize_t)); | |
| if (reverse_index_map == NULL) { | |
| goto end; | |
| } | |
| for (Py_ssize_t i = 0; i < nconsts; i++) { | |
| reverse_index_map[i] = -1; | |
| } | |
| for (Py_ssize_t i = 0; i < n_used_consts; i++) { | |
| assert(index_map[i] != -1); | |
| assert(reverse_index_map[index_map[i]] == -1); | |
| reverse_index_map[index_map[i]] = i; | |
| } | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| for (int i = 0; i < b->b_iused; i++) { | |
| if (OPCODE_HAS_CONST(b->b_instr[i].i_opcode)) { | |
| int index = b->b_instr[i].i_oparg; | |
| assert(reverse_index_map[index] >= 0); | |
| assert(reverse_index_map[index] < n_used_consts); | |
| b->b_instr[i].i_oparg = (int)reverse_index_map[index]; | |
| } | |
| } | |
| } | |
| err = SUCCESS; | |
| end: | |
| PyMem_Free(index_map); | |
| PyMem_Free(reverse_index_map); | |
| return err; | |
| } | |
| static int | |
| add_checks_for_loads_of_uninitialized_variables(basicblock *entryblock, | |
| int nlocals, | |
| int nparams) | |
| { | |
| if (nlocals == 0) { | |
| return SUCCESS; | |
| } | |
| if (nlocals > 64) { | |
| // To avoid O(nlocals**2) compilation, locals beyond the first | |
| // 64 are only analyzed one basicblock at a time: initialization | |
| // info is not passed between basicblocks. | |
| if (fast_scan_many_locals(entryblock, nlocals) < 0) { | |
| return ERROR; | |
| } | |
| nlocals = 64; | |
| } | |
| basicblock **stack = make_cfg_traversal_stack(entryblock); | |
| if (stack == NULL) { | |
| return ERROR; | |
| } | |
| basicblock **sp = stack; | |
| // First origin of being uninitialized: | |
| // The non-parameter locals in the entry block. | |
| uint64_t start_mask = 0; | |
| for (int i = nparams; i < nlocals; i++) { | |
| start_mask |= (uint64_t)1 << i; | |
| } | |
| maybe_push(entryblock, start_mask, &sp); | |
| // Second origin of being uninitialized: | |
| // There could be DELETE_FAST somewhere, so | |
| // be sure to scan each basicblock at least once. | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| scan_block_for_locals(b, &sp); | |
| } | |
| // Now propagate the uncertainty from the origins we found: Use | |
| // LOAD_FAST_CHECK for any LOAD_FAST where the local could be undefined. | |
| while (sp > stack) { | |
| basicblock *b = *--sp; | |
| // mark as no longer on stack | |
| b->b_visited = 0; | |
| scan_block_for_locals(b, &sp); | |
| } | |
| PyMem_Free(stack); | |
| return SUCCESS; | |
| } | |
| static int | |
| mark_warm(basicblock *entryblock) { | |
| basicblock **stack = make_cfg_traversal_stack(entryblock); | |
| if (stack == NULL) { | |
| return ERROR; | |
| } | |
| basicblock **sp = stack; | |
| *sp++ = entryblock; | |
| entryblock->b_visited = 1; | |
| while (sp > stack) { | |
| basicblock *b = *(--sp); | |
| assert(!b->b_except_handler); | |
| b->b_warm = 1; | |
| basicblock *next = b->b_next; | |
| if (next && BB_HAS_FALLTHROUGH(b) && !next->b_visited) { | |
| *sp++ = next; | |
| next->b_visited = 1; | |
| } | |
| for (int i=0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| if (is_jump(instr) && !instr->i_target->b_visited) { | |
| *sp++ = instr->i_target; | |
| instr->i_target->b_visited = 1; | |
| } | |
| } | |
| } | |
| PyMem_Free(stack); | |
| return SUCCESS; | |
| } | |
| static int | |
| mark_cold(basicblock *entryblock) { | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| assert(!b->b_cold && !b->b_warm); | |
| } | |
| if (mark_warm(entryblock) < 0) { | |
| return ERROR; | |
| } | |
| basicblock **stack = make_cfg_traversal_stack(entryblock); | |
| if (stack == NULL) { | |
| return ERROR; | |
| } | |
| basicblock **sp = stack; | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| if (b->b_except_handler) { | |
| assert(!b->b_warm); | |
| *sp++ = b; | |
| b->b_visited = 1; | |
| } | |
| } | |
| while (sp > stack) { | |
| basicblock *b = *(--sp); | |
| b->b_cold = 1; | |
| basicblock *next = b->b_next; | |
| if (next && BB_HAS_FALLTHROUGH(b)) { | |
| if (!next->b_warm && !next->b_visited) { | |
| *sp++ = next; | |
| next->b_visited = 1; | |
| } | |
| } | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| if (is_jump(instr)) { | |
| assert(i == b->b_iused - 1); | |
| basicblock *target = b->b_instr[i].i_target; | |
| if (!target->b_warm && !target->b_visited) { | |
| *sp++ = target; | |
| target->b_visited = 1; | |
| } | |
| } | |
| } | |
| } | |
| PyMem_Free(stack); | |
| return SUCCESS; | |
| } | |
| static int | |
| push_cold_blocks_to_end(cfg_builder *g) { | |
| basicblock *entryblock = g->g_entryblock; | |
| if (entryblock->b_next == NULL) { | |
| /* single basicblock, no need to reorder */ | |
| return SUCCESS; | |
| } | |
| RETURN_IF_ERROR(mark_cold(entryblock)); | |
| int next_lbl = get_max_label(g->g_entryblock) + 1; | |
| /* If we have a cold block with fallthrough to a warm block, add */ | |
| /* an explicit jump instead of fallthrough */ | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| if (b->b_cold && BB_HAS_FALLTHROUGH(b) && b->b_next && b->b_next->b_warm) { | |
| basicblock *explicit_jump = cfg_builder_new_block(g); | |
| if (explicit_jump == NULL) { | |
| return ERROR; | |
| } | |
| if (!IS_LABEL(b->b_next->b_label)) { | |
| b->b_next->b_label.id = next_lbl++; | |
| } | |
| basicblock_addop(explicit_jump, JUMP_NO_INTERRUPT, b->b_next->b_label.id, | |
| NO_LOCATION); | |
| explicit_jump->b_cold = 1; | |
| explicit_jump->b_next = b->b_next; | |
| explicit_jump->b_predecessors = 1; | |
| b->b_next = explicit_jump; | |
| /* set target */ | |
| cfg_instr *last = basicblock_last_instr(explicit_jump); | |
| last->i_target = explicit_jump->b_next; | |
| } | |
| } | |
| assert(!entryblock->b_cold); /* First block can't be cold */ | |
| basicblock *cold_blocks = NULL; | |
| basicblock *cold_blocks_tail = NULL; | |
| basicblock *b = entryblock; | |
| while(b->b_next) { | |
| assert(!b->b_cold); | |
| while (b->b_next && !b->b_next->b_cold) { | |
| b = b->b_next; | |
| } | |
| if (b->b_next == NULL) { | |
| /* no more cold blocks */ | |
| break; | |
| } | |
| /* b->b_next is the beginning of a cold streak */ | |
| assert(!b->b_cold && b->b_next->b_cold); | |
| basicblock *b_end = b->b_next; | |
| while (b_end->b_next && b_end->b_next->b_cold) { | |
| b_end = b_end->b_next; | |
| } | |
| /* b_end is the end of the cold streak */ | |
| assert(b_end && b_end->b_cold); | |
| assert(b_end->b_next == NULL || !b_end->b_next->b_cold); | |
| if (cold_blocks == NULL) { | |
| cold_blocks = b->b_next; | |
| } | |
| else { | |
| cold_blocks_tail->b_next = b->b_next; | |
| } | |
| cold_blocks_tail = b_end; | |
| b->b_next = b_end->b_next; | |
| b_end->b_next = NULL; | |
| } | |
| assert(b != NULL && b->b_next == NULL); | |
| b->b_next = cold_blocks; | |
| if (cold_blocks != NULL) { | |
| RETURN_IF_ERROR(remove_redundant_nops_and_jumps(g)); | |
| } | |
| return SUCCESS; | |
| } | |
| static int | |
| convert_pseudo_ops(cfg_builder *g) | |
| { | |
| basicblock *entryblock = g->g_entryblock; | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| if (is_block_push(instr)) { | |
| INSTR_SET_OP0(instr, NOP); | |
| } | |
| else if (instr->i_opcode == LOAD_CLOSURE) { | |
| assert(is_pseudo_target(LOAD_CLOSURE, LOAD_FAST)); | |
| instr->i_opcode = LOAD_FAST; | |
| } | |
| else if (instr->i_opcode == STORE_FAST_MAYBE_NULL) { | |
| assert(is_pseudo_target(STORE_FAST_MAYBE_NULL, STORE_FAST)); | |
| instr->i_opcode = STORE_FAST; | |
| } | |
| } | |
| } | |
| return remove_redundant_nops_and_jumps(g); | |
| } | |
| static inline bool | |
| is_exit_or_eval_check_without_lineno(basicblock *b) { | |
| if (basicblock_exits_scope(b) || basicblock_has_eval_break(b)) { | |
| return basicblock_has_no_lineno(b); | |
| } | |
| else { | |
| return false; | |
| } | |
| } | |
| /* PEP 626 mandates that the f_lineno of a frame is correct | |
| * after a frame terminates. It would be prohibitively expensive | |
| * to continuously update the f_lineno field at runtime, | |
| * so we make sure that all exiting instruction (raises and returns) | |
| * have a valid line number, allowing us to compute f_lineno lazily. | |
| * We can do this by duplicating the exit blocks without line number | |
| * so that none have more than one predecessor. We can then safely | |
| * copy the line number from the sole predecessor block. | |
| */ | |
| static int | |
| duplicate_exits_without_lineno(cfg_builder *g) | |
| { | |
| int next_lbl = get_max_label(g->g_entryblock) + 1; | |
| /* Copy all exit blocks without line number that are targets of a jump. | |
| */ | |
| basicblock *entryblock = g->g_entryblock; | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| if (last == NULL) { | |
| continue; | |
| } | |
| if (is_jump(last)) { | |
| basicblock *target = next_nonempty_block(last->i_target); | |
| if (is_exit_or_eval_check_without_lineno(target) && target->b_predecessors > 1) { | |
| basicblock *new_target = copy_basicblock(g, target); | |
| if (new_target == NULL) { | |
| return ERROR; | |
| } | |
| new_target->b_instr[0].i_loc = last->i_loc; | |
| last->i_target = new_target; | |
| target->b_predecessors--; | |
| new_target->b_predecessors = 1; | |
| new_target->b_next = target->b_next; | |
| new_target->b_label.id = next_lbl++; | |
| target->b_next = new_target; | |
| } | |
| } | |
| } | |
| /* Any remaining reachable exit blocks without line number can only be reached by | |
| * fall through, and thus can only have a single predecessor */ | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| if (BB_HAS_FALLTHROUGH(b) && b->b_next && b->b_iused > 0) { | |
| if (is_exit_or_eval_check_without_lineno(b->b_next)) { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| assert(last != NULL); | |
| b->b_next->b_instr[0].i_loc = last->i_loc; | |
| } | |
| } | |
| } | |
| return SUCCESS; | |
| } | |
| /* If an instruction has no line number, but it's predecessor in the BB does, | |
| * then copy the line number. If a successor block has no line number, and only | |
| * one predecessor, then inherit the line number. | |
| * This ensures that all exit blocks (with one predecessor) receive a line number. | |
| * Also reduces the size of the line number table, | |
| * but has no impact on the generated line number events. | |
| */ | |
| static void | |
| propagate_line_numbers(basicblock *entryblock) { | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| cfg_instr *last = basicblock_last_instr(b); | |
| if (last == NULL) { | |
| continue; | |
| } | |
| location prev_location = NO_LOCATION; | |
| for (int i = 0; i < b->b_iused; i++) { | |
| if (b->b_instr[i].i_loc.lineno < 0) { | |
| b->b_instr[i].i_loc = prev_location; | |
| } | |
| else { | |
| prev_location = b->b_instr[i].i_loc; | |
| } | |
| } | |
| if (BB_HAS_FALLTHROUGH(b) && b->b_next->b_predecessors == 1) { | |
| if (b->b_next->b_iused > 0) { | |
| if (b->b_next->b_instr[0].i_loc.lineno < 0) { | |
| b->b_next->b_instr[0].i_loc = prev_location; | |
| } | |
| } | |
| } | |
| if (is_jump(last)) { | |
| basicblock *target = last->i_target; | |
| if (target->b_predecessors == 1) { | |
| if (target->b_instr[0].i_loc.lineno < 0) { | |
| target->b_instr[0].i_loc = prev_location; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| static int | |
| resolve_line_numbers(cfg_builder *g, int firstlineno) | |
| { | |
| RETURN_IF_ERROR(duplicate_exits_without_lineno(g)); | |
| propagate_line_numbers(g->g_entryblock); | |
| return SUCCESS; | |
| } | |
| int | |
| _PyCfg_OptimizeCodeUnit(cfg_builder *g, PyObject *consts, PyObject *const_cache, | |
| int nlocals, int nparams, int firstlineno) | |
| { | |
| assert(cfg_builder_check(g)); | |
| /** Preprocessing **/ | |
| /* Map labels to targets and mark exception handlers */ | |
| RETURN_IF_ERROR(translate_jump_labels_to_targets(g->g_entryblock)); | |
| RETURN_IF_ERROR(mark_except_handlers(g->g_entryblock)); | |
| RETURN_IF_ERROR(label_exception_targets(g->g_entryblock)); | |
| /** Optimization **/ | |
| RETURN_IF_ERROR(optimize_cfg(g, consts, const_cache, firstlineno)); | |
| RETURN_IF_ERROR(remove_unused_consts(g->g_entryblock, consts)); | |
| RETURN_IF_ERROR( | |
| add_checks_for_loads_of_uninitialized_variables( | |
| g->g_entryblock, nlocals, nparams)); | |
| RETURN_IF_ERROR(insert_superinstructions(g)); | |
| RETURN_IF_ERROR(push_cold_blocks_to_end(g)); | |
| RETURN_IF_ERROR(resolve_line_numbers(g, firstlineno)); | |
| return SUCCESS; | |
| } | |
| static int * | |
| build_cellfixedoffsets(_PyCompile_CodeUnitMetadata *umd) | |
| { | |
| int nlocals = (int)PyDict_GET_SIZE(umd->u_varnames); | |
| int ncellvars = (int)PyDict_GET_SIZE(umd->u_cellvars); | |
| int nfreevars = (int)PyDict_GET_SIZE(umd->u_freevars); | |
| int noffsets = ncellvars + nfreevars; | |
| int *fixed = PyMem_New(int, noffsets); | |
| if (fixed == NULL) { | |
| PyErr_NoMemory(); | |
| return NULL; | |
| } | |
| for (int i = 0; i < noffsets; i++) { | |
| fixed[i] = nlocals + i; | |
| } | |
| PyObject *varname, *cellindex; | |
| Py_ssize_t pos = 0; | |
| while (PyDict_Next(umd->u_cellvars, &pos, &varname, &cellindex)) { | |
| PyObject *varindex; | |
| if (PyDict_GetItemRef(umd->u_varnames, varname, &varindex) < 0) { | |
| goto error; | |
| } | |
| if (varindex == NULL) { | |
| continue; | |
| } | |
| int argoffset = PyLong_AsInt(varindex); | |
| Py_DECREF(varindex); | |
| if (argoffset == -1 && PyErr_Occurred()) { | |
| goto error; | |
| } | |
| int oldindex = PyLong_AsInt(cellindex); | |
| if (oldindex == -1 && PyErr_Occurred()) { | |
| goto error; | |
| } | |
| fixed[oldindex] = argoffset; | |
| } | |
| return fixed; | |
| error: | |
| PyMem_Free(fixed); | |
| return NULL; | |
| } | |
| #define IS_GENERATOR(CF) \ | |
| ((CF) & (CO_GENERATOR | CO_COROUTINE | CO_ASYNC_GENERATOR)) | |
| static int | |
| insert_prefix_instructions(_PyCompile_CodeUnitMetadata *umd, basicblock *entryblock, | |
| int *fixed, int nfreevars, int code_flags) | |
| { | |
| assert(umd->u_firstlineno > 0); | |
| /* Add the generator prefix instructions. */ | |
| if (IS_GENERATOR(code_flags)) { | |
| /* Note that RETURN_GENERATOR + POP_TOP have a net stack effect | |
| * of 0. This is because RETURN_GENERATOR pushes an element | |
| * with _PyFrame_StackPush before switching stacks. | |
| */ | |
| location loc = LOCATION(umd->u_firstlineno, umd->u_firstlineno, -1, -1); | |
| cfg_instr make_gen = { | |
| .i_opcode = RETURN_GENERATOR, | |
| .i_oparg = 0, | |
| .i_loc = loc, | |
| .i_target = NULL, | |
| }; | |
| RETURN_IF_ERROR(basicblock_insert_instruction(entryblock, 0, &make_gen)); | |
| cfg_instr pop_top = { | |
| .i_opcode = POP_TOP, | |
| .i_oparg = 0, | |
| .i_loc = loc, | |
| .i_target = NULL, | |
| }; | |
| RETURN_IF_ERROR(basicblock_insert_instruction(entryblock, 1, &pop_top)); | |
| } | |
| /* Set up cells for any variable that escapes, to be put in a closure. */ | |
| const int ncellvars = (int)PyDict_GET_SIZE(umd->u_cellvars); | |
| if (ncellvars) { | |
| // umd->u_cellvars has the cells out of order so we sort them | |
| // before adding the MAKE_CELL instructions. Note that we | |
| // adjust for arg cells, which come first. | |
| const int nvars = ncellvars + (int)PyDict_GET_SIZE(umd->u_varnames); | |
| int *sorted = PyMem_RawCalloc(nvars, sizeof(int)); | |
| if (sorted == NULL) { | |
| PyErr_NoMemory(); | |
| return ERROR; | |
| } | |
| for (int i = 0; i < ncellvars; i++) { | |
| sorted[fixed[i]] = i + 1; | |
| } | |
| for (int i = 0, ncellsused = 0; ncellsused < ncellvars; i++) { | |
| int oldindex = sorted[i] - 1; | |
| if (oldindex == -1) { | |
| continue; | |
| } | |
| cfg_instr make_cell = { | |
| .i_opcode = MAKE_CELL, | |
| // This will get fixed in offset_derefs(). | |
| .i_oparg = oldindex, | |
| .i_loc = NO_LOCATION, | |
| .i_target = NULL, | |
| }; | |
| if (basicblock_insert_instruction(entryblock, ncellsused, &make_cell) < 0) { | |
| PyMem_RawFree(sorted); | |
| return ERROR; | |
| } | |
| ncellsused += 1; | |
| } | |
| PyMem_RawFree(sorted); | |
| } | |
| if (nfreevars) { | |
| cfg_instr copy_frees = { | |
| .i_opcode = COPY_FREE_VARS, | |
| .i_oparg = nfreevars, | |
| .i_loc = NO_LOCATION, | |
| .i_target = NULL, | |
| }; | |
| RETURN_IF_ERROR(basicblock_insert_instruction(entryblock, 0, ©_frees)); | |
| } | |
| return SUCCESS; | |
| } | |
| static int | |
| fix_cell_offsets(_PyCompile_CodeUnitMetadata *umd, basicblock *entryblock, int *fixedmap) | |
| { | |
| int nlocals = (int)PyDict_GET_SIZE(umd->u_varnames); | |
| int ncellvars = (int)PyDict_GET_SIZE(umd->u_cellvars); | |
| int nfreevars = (int)PyDict_GET_SIZE(umd->u_freevars); | |
| int noffsets = ncellvars + nfreevars; | |
| // First deal with duplicates (arg cells). | |
| int numdropped = 0; | |
| for (int i = 0; i < noffsets ; i++) { | |
| if (fixedmap[i] == i + nlocals) { | |
| fixedmap[i] -= numdropped; | |
| } | |
| else { | |
| // It was a duplicate (cell/arg). | |
| numdropped += 1; | |
| } | |
| } | |
| // Then update offsets, either relative to locals or by cell2arg. | |
| for (basicblock *b = entryblock; b != NULL; b = b->b_next) { | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *inst = &b->b_instr[i]; | |
| // This is called before extended args are generated. | |
| assert(inst->i_opcode != EXTENDED_ARG); | |
| int oldoffset = inst->i_oparg; | |
| switch(inst->i_opcode) { | |
| case MAKE_CELL: | |
| case LOAD_CLOSURE: | |
| case LOAD_DEREF: | |
| case STORE_DEREF: | |
| case DELETE_DEREF: | |
| case LOAD_FROM_DICT_OR_DEREF: | |
| assert(oldoffset >= 0); | |
| assert(oldoffset < noffsets); | |
| assert(fixedmap[oldoffset] >= 0); | |
| inst->i_oparg = fixedmap[oldoffset]; | |
| } | |
| } | |
| } | |
| return numdropped; | |
| } | |
| static int | |
| prepare_localsplus(_PyCompile_CodeUnitMetadata *umd, cfg_builder *g, int code_flags) | |
| { | |
| assert(PyDict_GET_SIZE(umd->u_varnames) < INT_MAX); | |
| assert(PyDict_GET_SIZE(umd->u_cellvars) < INT_MAX); | |
| assert(PyDict_GET_SIZE(umd->u_freevars) < INT_MAX); | |
| int nlocals = (int)PyDict_GET_SIZE(umd->u_varnames); | |
| int ncellvars = (int)PyDict_GET_SIZE(umd->u_cellvars); | |
| int nfreevars = (int)PyDict_GET_SIZE(umd->u_freevars); | |
| assert(INT_MAX - nlocals - ncellvars > 0); | |
| assert(INT_MAX - nlocals - ncellvars - nfreevars > 0); | |
| int nlocalsplus = nlocals + ncellvars + nfreevars; | |
| int* cellfixedoffsets = build_cellfixedoffsets(umd); | |
| if (cellfixedoffsets == NULL) { | |
| return ERROR; | |
| } | |
| // This must be called before fix_cell_offsets(). | |
| if (insert_prefix_instructions(umd, g->g_entryblock, cellfixedoffsets, nfreevars, code_flags)) { | |
| PyMem_Free(cellfixedoffsets); | |
| return ERROR; | |
| } | |
| int numdropped = fix_cell_offsets(umd, g->g_entryblock, cellfixedoffsets); | |
| PyMem_Free(cellfixedoffsets); // At this point we're done with it. | |
| cellfixedoffsets = NULL; | |
| if (numdropped < 0) { | |
| return ERROR; | |
| } | |
| nlocalsplus -= numdropped; | |
| return nlocalsplus; | |
| } | |
| int | |
| _PyCfg_ToInstructionSequence(cfg_builder *g, _PyInstructionSequence *seq) | |
| { | |
| int lbl = 0; | |
| for (basicblock *b = g->g_entryblock; b != NULL; b = b->b_next) { | |
| b->b_label = (jump_target_label){lbl}; | |
| lbl += 1; | |
| } | |
| for (basicblock *b = g->g_entryblock; b != NULL; b = b->b_next) { | |
| RETURN_IF_ERROR(_PyInstructionSequence_UseLabel(seq, b->b_label.id)); | |
| for (int i = 0; i < b->b_iused; i++) { | |
| cfg_instr *instr = &b->b_instr[i]; | |
| if (HAS_TARGET(instr->i_opcode)) { | |
| /* Set oparg to the label id (it will later be mapped to an offset) */ | |
| instr->i_oparg = instr->i_target->b_label.id; | |
| } | |
| RETURN_IF_ERROR( | |
| _PyInstructionSequence_Addop( | |
| seq, instr->i_opcode, instr->i_oparg, instr->i_loc)); | |
| _PyExceptHandlerInfo *hi = &seq->s_instrs[seq->s_used-1].i_except_handler_info; | |
| if (instr->i_except != NULL) { | |
| hi->h_label = instr->i_except->b_label.id; | |
| hi->h_startdepth = instr->i_except->b_startdepth; | |
| hi->h_preserve_lasti = instr->i_except->b_preserve_lasti; | |
| } | |
| else { | |
| hi->h_label = -1; | |
| } | |
| } | |
| } | |
| return SUCCESS; | |
| } | |
| int | |
| _PyCfg_OptimizedCfgToInstructionSequence(cfg_builder *g, | |
| _PyCompile_CodeUnitMetadata *umd, int code_flags, | |
| int *stackdepth, int *nlocalsplus, | |
| _PyInstructionSequence *seq) | |
| { | |
| *stackdepth = calculate_stackdepth(g); | |
| if (*stackdepth < 0) { | |
| return ERROR; | |
| } | |
| /* prepare_localsplus adds instructions for generators that push | |
| * and pop an item on the stack. This assertion makes sure there | |
| * is space on the stack for that. | |
| * It should always be true, because a generator must have at | |
| * least one expression or call to INTRINSIC_STOPITERATION_ERROR, | |
| * which requires stackspace. | |
| */ | |
| assert(!(IS_GENERATOR(code_flags) && *stackdepth == 0)); | |
| *nlocalsplus = prepare_localsplus(umd, g, code_flags); | |
| if (*nlocalsplus < 0) { | |
| return ERROR; | |
| } | |
| RETURN_IF_ERROR(convert_pseudo_ops(g)); | |
| /* Order of basic blocks must have been determined by now */ | |
| RETURN_IF_ERROR(normalize_jumps(g)); | |
| assert(no_redundant_jumps(g)); | |
| /* Can't modify the bytecode after computing jump offsets. */ | |
| if (_PyCfg_ToInstructionSequence(g, seq) < 0) { | |
| return ERROR; | |
| } | |
| return SUCCESS; | |
| } | |
| /* This is used by _PyCompile_Assemble to fill in the jump and exception | |
| * targets in a synthetic CFG (which is not the ouptut of the builtin compiler). | |
| */ | |
| int | |
| _PyCfg_JumpLabelsToTargets(cfg_builder *g) | |
| { | |
| RETURN_IF_ERROR(translate_jump_labels_to_targets(g->g_entryblock)); | |
| RETURN_IF_ERROR(label_exception_targets(g->g_entryblock)); | |
| return SUCCESS; | |
| } |