| /* Error handling */ | |
| #include "Python.h" | |
| #include "pycore_initconfig.h" | |
| #include "pycore_pyerrors.h" | |
| #include "pycore_pystate.h" // _PyThreadState_GET() | |
| #include "pycore_sysmodule.h" | |
| #include "pycore_traceback.h" | |
| #ifndef __STDC__ | |
| #ifndef MS_WINDOWS | |
| extern char *strerror(int); | |
| #endif | |
| #endif | |
| #ifdef MS_WINDOWS | |
| #include <windows.h> | |
| #include <winbase.h> | |
| #endif | |
| #include <ctype.h> | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| _Py_IDENTIFIER(__module__); | |
| _Py_IDENTIFIER(builtins); | |
| _Py_IDENTIFIER(stderr); | |
| _Py_IDENTIFIER(flush); | |
| /* Forward declarations */ | |
| static PyObject * | |
| _PyErr_FormatV(PyThreadState *tstate, PyObject *exception, | |
| const char *format, va_list vargs); | |
| void | |
| _PyErr_Restore(PyThreadState *tstate, PyObject *type, PyObject *value, | |
| PyObject *traceback) | |
| { | |
| PyObject *oldtype, *oldvalue, *oldtraceback; | |
| if (traceback != NULL && !PyTraceBack_Check(traceback)) { | |
| /* XXX Should never happen -- fatal error instead? */ | |
| /* Well, it could be None. */ | |
| Py_DECREF(traceback); | |
| traceback = NULL; | |
| } | |
| /* Save these in locals to safeguard against recursive | |
| invocation through Py_XDECREF */ | |
| oldtype = tstate->curexc_type; | |
| oldvalue = tstate->curexc_value; | |
| oldtraceback = tstate->curexc_traceback; | |
| tstate->curexc_type = type; | |
| tstate->curexc_value = value; | |
| tstate->curexc_traceback = traceback; | |
| Py_XDECREF(oldtype); | |
| Py_XDECREF(oldvalue); | |
| Py_XDECREF(oldtraceback); | |
| } | |
| void | |
| PyErr_Restore(PyObject *type, PyObject *value, PyObject *traceback) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_Restore(tstate, type, value, traceback); | |
| } | |
| _PyErr_StackItem * | |
| _PyErr_GetTopmostException(PyThreadState *tstate) | |
| { | |
| _PyErr_StackItem *exc_info = tstate->exc_info; | |
| while ((exc_info->exc_type == NULL || exc_info->exc_type == Py_None) && | |
| exc_info->previous_item != NULL) | |
| { | |
| exc_info = exc_info->previous_item; | |
| } | |
| return exc_info; | |
| } | |
| static PyObject* | |
| _PyErr_CreateException(PyObject *exception, PyObject *value) | |
| { | |
| if (value == NULL || value == Py_None) { | |
| return _PyObject_CallNoArg(exception); | |
| } | |
| else if (PyTuple_Check(value)) { | |
| return PyObject_Call(exception, value, NULL); | |
| } | |
| else { | |
| return PyObject_CallOneArg(exception, value); | |
| } | |
| } | |
| void | |
| _PyErr_SetObject(PyThreadState *tstate, PyObject *exception, PyObject *value) | |
| { | |
| PyObject *exc_value; | |
| PyObject *tb = NULL; | |
| if (exception != NULL && | |
| !PyExceptionClass_Check(exception)) { | |
| _PyErr_Format(tstate, PyExc_SystemError, | |
| "_PyErr_SetObject: " | |
| "exception %R is not a BaseException subclass", | |
| exception); | |
| return; | |
| } | |
| Py_XINCREF(value); | |
| exc_value = _PyErr_GetTopmostException(tstate)->exc_value; | |
| if (exc_value != NULL && exc_value != Py_None) { | |
| /* Implicit exception chaining */ | |
| Py_INCREF(exc_value); | |
| if (value == NULL || !PyExceptionInstance_Check(value)) { | |
| /* We must normalize the value right now */ | |
| PyObject *fixed_value; | |
| /* Issue #23571: functions must not be called with an | |
| exception set */ | |
| _PyErr_Clear(tstate); | |
| fixed_value = _PyErr_CreateException(exception, value); | |
| Py_XDECREF(value); | |
| if (fixed_value == NULL) { | |
| Py_DECREF(exc_value); | |
| return; | |
| } | |
| value = fixed_value; | |
| } | |
| /* Avoid reference cycles through the context chain. | |
| This is O(chain length) but context chains are | |
| usually very short. Sensitive readers may try | |
| to inline the call to PyException_GetContext. */ | |
| if (exc_value != value) { | |
| PyObject *o = exc_value, *context; | |
| while ((context = PyException_GetContext(o))) { | |
| Py_DECREF(context); | |
| if (context == value) { | |
| PyException_SetContext(o, NULL); | |
| break; | |
| } | |
| o = context; | |
| } | |
| PyException_SetContext(value, exc_value); | |
| } | |
| else { | |
| Py_DECREF(exc_value); | |
| } | |
| } | |
| if (value != NULL && PyExceptionInstance_Check(value)) | |
| tb = PyException_GetTraceback(value); | |
| Py_XINCREF(exception); | |
| _PyErr_Restore(tstate, exception, value, tb); | |
| } | |
| void | |
| PyErr_SetObject(PyObject *exception, PyObject *value) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_SetObject(tstate, exception, value); | |
| } | |
| /* Set a key error with the specified argument, wrapping it in a | |
| * tuple automatically so that tuple keys are not unpacked as the | |
| * exception arguments. */ | |
| void | |
| _PyErr_SetKeyError(PyObject *arg) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| PyObject *tup = PyTuple_Pack(1, arg); | |
| if (!tup) { | |
| /* caller will expect error to be set anyway */ | |
| return; | |
| } | |
| _PyErr_SetObject(tstate, PyExc_KeyError, tup); | |
| Py_DECREF(tup); | |
| } | |
| void | |
| _PyErr_SetNone(PyThreadState *tstate, PyObject *exception) | |
| { | |
| _PyErr_SetObject(tstate, exception, (PyObject *)NULL); | |
| } | |
| void | |
| PyErr_SetNone(PyObject *exception) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_SetNone(tstate, exception); | |
| } | |
| void | |
| _PyErr_SetString(PyThreadState *tstate, PyObject *exception, | |
| const char *string) | |
| { | |
| PyObject *value = PyUnicode_FromString(string); | |
| _PyErr_SetObject(tstate, exception, value); | |
| Py_XDECREF(value); | |
| } | |
| void | |
| PyErr_SetString(PyObject *exception, const char *string) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_SetString(tstate, exception, string); | |
| } | |
| PyObject* _Py_HOT_FUNCTION | |
| PyErr_Occurred(void) | |
| { | |
| /* The caller must hold the GIL. */ | |
| assert(PyGILState_Check()); | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| return _PyErr_Occurred(tstate); | |
| } | |
| int | |
| PyErr_GivenExceptionMatches(PyObject *err, PyObject *exc) | |
| { | |
| if (err == NULL || exc == NULL) { | |
| /* maybe caused by "import exceptions" that failed early on */ | |
| return 0; | |
| } | |
| if (PyTuple_Check(exc)) { | |
| Py_ssize_t i, n; | |
| n = PyTuple_Size(exc); | |
| for (i = 0; i < n; i++) { | |
| /* Test recursively */ | |
| if (PyErr_GivenExceptionMatches( | |
| err, PyTuple_GET_ITEM(exc, i))) | |
| { | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* err might be an instance, so check its class. */ | |
| if (PyExceptionInstance_Check(err)) | |
| err = PyExceptionInstance_Class(err); | |
| if (PyExceptionClass_Check(err) && PyExceptionClass_Check(exc)) { | |
| return PyType_IsSubtype((PyTypeObject *)err, (PyTypeObject *)exc); | |
| } | |
| return err == exc; | |
| } | |
| int | |
| _PyErr_ExceptionMatches(PyThreadState *tstate, PyObject *exc) | |
| { | |
| return PyErr_GivenExceptionMatches(_PyErr_Occurred(tstate), exc); | |
| } | |
| int | |
| PyErr_ExceptionMatches(PyObject *exc) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| return _PyErr_ExceptionMatches(tstate, exc); | |
| } | |
| #ifndef Py_NORMALIZE_RECURSION_LIMIT | |
| #define Py_NORMALIZE_RECURSION_LIMIT 32 | |
| #endif | |
| /* Used in many places to normalize a raised exception, including in | |
| eval_code2(), do_raise(), and PyErr_Print() | |
| XXX: should PyErr_NormalizeException() also call | |
| PyException_SetTraceback() with the resulting value and tb? | |
| */ | |
| void | |
| _PyErr_NormalizeException(PyThreadState *tstate, PyObject **exc, | |
| PyObject **val, PyObject **tb) | |
| { | |
| int recursion_depth = 0; | |
| PyObject *type, *value, *initial_tb; | |
| restart: | |
| type = *exc; | |
| if (type == NULL) { | |
| /* There was no exception, so nothing to do. */ | |
| return; | |
| } | |
| value = *val; | |
| /* If PyErr_SetNone() was used, the value will have been actually | |
| set to NULL. | |
| */ | |
| if (!value) { | |
| value = Py_None; | |
| Py_INCREF(value); | |
| } | |
| /* Normalize the exception so that if the type is a class, the | |
| value will be an instance. | |
| */ | |
| if (PyExceptionClass_Check(type)) { | |
| PyObject *inclass = NULL; | |
| int is_subclass = 0; | |
| if (PyExceptionInstance_Check(value)) { | |
| inclass = PyExceptionInstance_Class(value); | |
| is_subclass = PyObject_IsSubclass(inclass, type); | |
| if (is_subclass < 0) { | |
| goto error; | |
| } | |
| } | |
| /* If the value was not an instance, or is not an instance | |
| whose class is (or is derived from) type, then use the | |
| value as an argument to instantiation of the type | |
| class. | |
| */ | |
| if (!is_subclass) { | |
| PyObject *fixed_value = _PyErr_CreateException(type, value); | |
| if (fixed_value == NULL) { | |
| goto error; | |
| } | |
| Py_DECREF(value); | |
| value = fixed_value; | |
| } | |
| /* If the class of the instance doesn't exactly match the | |
| class of the type, believe the instance. | |
| */ | |
| else if (inclass != type) { | |
| Py_INCREF(inclass); | |
| Py_DECREF(type); | |
| type = inclass; | |
| } | |
| } | |
| *exc = type; | |
| *val = value; | |
| return; | |
| error: | |
| Py_DECREF(type); | |
| Py_DECREF(value); | |
| recursion_depth++; | |
| if (recursion_depth == Py_NORMALIZE_RECURSION_LIMIT) { | |
| _PyErr_SetString(tstate, PyExc_RecursionError, | |
| "maximum recursion depth exceeded " | |
| "while normalizing an exception"); | |
| } | |
| /* If the new exception doesn't set a traceback and the old | |
| exception had a traceback, use the old traceback for the | |
| new exception. It's better than nothing. | |
| */ | |
| initial_tb = *tb; | |
| _PyErr_Fetch(tstate, exc, val, tb); | |
| assert(*exc != NULL); | |
| if (initial_tb != NULL) { | |
| if (*tb == NULL) | |
| *tb = initial_tb; | |
| else | |
| Py_DECREF(initial_tb); | |
| } | |
| /* Abort when Py_NORMALIZE_RECURSION_LIMIT has been exceeded, and the | |
| corresponding RecursionError could not be normalized, and the | |
| MemoryError raised when normalize this RecursionError could not be | |
| normalized. */ | |
| if (recursion_depth >= Py_NORMALIZE_RECURSION_LIMIT + 2) { | |
| if (PyErr_GivenExceptionMatches(*exc, PyExc_MemoryError)) { | |
| Py_FatalError("Cannot recover from MemoryErrors " | |
| "while normalizing exceptions."); | |
| } | |
| else { | |
| Py_FatalError("Cannot recover from the recursive normalization " | |
| "of an exception."); | |
| } | |
| } | |
| goto restart; | |
| } | |
| void | |
| PyErr_NormalizeException(PyObject **exc, PyObject **val, PyObject **tb) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_NormalizeException(tstate, exc, val, tb); | |
| } | |
| void | |
| _PyErr_Fetch(PyThreadState *tstate, PyObject **p_type, PyObject **p_value, | |
| PyObject **p_traceback) | |
| { | |
| *p_type = tstate->curexc_type; | |
| *p_value = tstate->curexc_value; | |
| *p_traceback = tstate->curexc_traceback; | |
| tstate->curexc_type = NULL; | |
| tstate->curexc_value = NULL; | |
| tstate->curexc_traceback = NULL; | |
| } | |
| void | |
| PyErr_Fetch(PyObject **p_type, PyObject **p_value, PyObject **p_traceback) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_Fetch(tstate, p_type, p_value, p_traceback); | |
| } | |
| void | |
| _PyErr_Clear(PyThreadState *tstate) | |
| { | |
| _PyErr_Restore(tstate, NULL, NULL, NULL); | |
| } | |
| void | |
| PyErr_Clear(void) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_Clear(tstate); | |
| } | |
| void | |
| _PyErr_GetExcInfo(PyThreadState *tstate, | |
| PyObject **p_type, PyObject **p_value, PyObject **p_traceback) | |
| { | |
| _PyErr_StackItem *exc_info = _PyErr_GetTopmostException(tstate); | |
| *p_type = exc_info->exc_type; | |
| *p_value = exc_info->exc_value; | |
| *p_traceback = exc_info->exc_traceback; | |
| Py_XINCREF(*p_type); | |
| Py_XINCREF(*p_value); | |
| Py_XINCREF(*p_traceback); | |
| } | |
| void | |
| PyErr_GetExcInfo(PyObject **p_type, PyObject **p_value, PyObject **p_traceback) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_GetExcInfo(tstate, p_type, p_value, p_traceback); | |
| } | |
| void | |
| PyErr_SetExcInfo(PyObject *p_type, PyObject *p_value, PyObject *p_traceback) | |
| { | |
| PyObject *oldtype, *oldvalue, *oldtraceback; | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| oldtype = tstate->exc_info->exc_type; | |
| oldvalue = tstate->exc_info->exc_value; | |
| oldtraceback = tstate->exc_info->exc_traceback; | |
| tstate->exc_info->exc_type = p_type; | |
| tstate->exc_info->exc_value = p_value; | |
| tstate->exc_info->exc_traceback = p_traceback; | |
| Py_XDECREF(oldtype); | |
| Py_XDECREF(oldvalue); | |
| Py_XDECREF(oldtraceback); | |
| } | |
| /* Like PyErr_Restore(), but if an exception is already set, | |
| set the context associated with it. | |
| The caller is responsible for ensuring that this call won't create | |
| any cycles in the exception context chain. */ | |
| void | |
| _PyErr_ChainExceptions(PyObject *exc, PyObject *val, PyObject *tb) | |
| { | |
| if (exc == NULL) | |
| return; | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| if (!PyExceptionClass_Check(exc)) { | |
| _PyErr_Format(tstate, PyExc_SystemError, | |
| "_PyErr_ChainExceptions: " | |
| "exception %R is not a BaseException subclass", | |
| exc); | |
| return; | |
| } | |
| if (_PyErr_Occurred(tstate)) { | |
| PyObject *exc2, *val2, *tb2; | |
| _PyErr_Fetch(tstate, &exc2, &val2, &tb2); | |
| _PyErr_NormalizeException(tstate, &exc, &val, &tb); | |
| if (tb != NULL) { | |
| PyException_SetTraceback(val, tb); | |
| Py_DECREF(tb); | |
| } | |
| Py_DECREF(exc); | |
| _PyErr_NormalizeException(tstate, &exc2, &val2, &tb2); | |
| PyException_SetContext(val2, val); | |
| _PyErr_Restore(tstate, exc2, val2, tb2); | |
| } | |
| else { | |
| _PyErr_Restore(tstate, exc, val, tb); | |
| } | |
| } | |
| /* Set the currently set exception's context to the given exception. | |
| If the provided exc_info is NULL, then the current Python thread state's | |
| exc_info will be used for the context instead. | |
| This function can only be called when _PyErr_Occurred() is true. | |
| Also, this function won't create any cycles in the exception context | |
| chain to the extent that _PyErr_SetObject ensures this. */ | |
| void | |
| _PyErr_ChainStackItem(_PyErr_StackItem *exc_info) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| assert(_PyErr_Occurred(tstate)); | |
| int exc_info_given; | |
| if (exc_info == NULL) { | |
| exc_info_given = 0; | |
| exc_info = tstate->exc_info; | |
| } else { | |
| exc_info_given = 1; | |
| } | |
| if (exc_info->exc_type == NULL || exc_info->exc_type == Py_None) { | |
| return; | |
| } | |
| _PyErr_StackItem *saved_exc_info; | |
| if (exc_info_given) { | |
| /* Temporarily set the thread state's exc_info since this is what | |
| _PyErr_SetObject uses for implicit exception chaining. */ | |
| saved_exc_info = tstate->exc_info; | |
| tstate->exc_info = exc_info; | |
| } | |
| PyObject *exc, *val, *tb; | |
| _PyErr_Fetch(tstate, &exc, &val, &tb); | |
| PyObject *exc2, *val2, *tb2; | |
| exc2 = exc_info->exc_type; | |
| val2 = exc_info->exc_value; | |
| tb2 = exc_info->exc_traceback; | |
| _PyErr_NormalizeException(tstate, &exc2, &val2, &tb2); | |
| if (tb2 != NULL) { | |
| PyException_SetTraceback(val2, tb2); | |
| } | |
| /* _PyErr_SetObject sets the context from PyThreadState. */ | |
| _PyErr_SetObject(tstate, exc, val); | |
| Py_DECREF(exc); // since _PyErr_Occurred was true | |
| Py_XDECREF(val); | |
| Py_XDECREF(tb); | |
| if (exc_info_given) { | |
| tstate->exc_info = saved_exc_info; | |
| } | |
| } | |
| static PyObject * | |
| _PyErr_FormatVFromCause(PyThreadState *tstate, PyObject *exception, | |
| const char *format, va_list vargs) | |
| { | |
| PyObject *exc, *val, *val2, *tb; | |
| assert(_PyErr_Occurred(tstate)); | |
| _PyErr_Fetch(tstate, &exc, &val, &tb); | |
| _PyErr_NormalizeException(tstate, &exc, &val, &tb); | |
| if (tb != NULL) { | |
| PyException_SetTraceback(val, tb); | |
| Py_DECREF(tb); | |
| } | |
| Py_DECREF(exc); | |
| assert(!_PyErr_Occurred(tstate)); | |
| _PyErr_FormatV(tstate, exception, format, vargs); | |
| _PyErr_Fetch(tstate, &exc, &val2, &tb); | |
| _PyErr_NormalizeException(tstate, &exc, &val2, &tb); | |
| Py_INCREF(val); | |
| PyException_SetCause(val2, val); | |
| PyException_SetContext(val2, val); | |
| _PyErr_Restore(tstate, exc, val2, tb); | |
| return NULL; | |
| } | |
| PyObject * | |
| _PyErr_FormatFromCauseTstate(PyThreadState *tstate, PyObject *exception, | |
| const char *format, ...) | |
| { | |
| va_list vargs; | |
| #ifdef HAVE_STDARG_PROTOTYPES | |
| va_start(vargs, format); | |
| #else | |
| va_start(vargs); | |
| #endif | |
| _PyErr_FormatVFromCause(tstate, exception, format, vargs); | |
| va_end(vargs); | |
| return NULL; | |
| } | |
| PyObject * | |
| _PyErr_FormatFromCause(PyObject *exception, const char *format, ...) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| va_list vargs; | |
| #ifdef HAVE_STDARG_PROTOTYPES | |
| va_start(vargs, format); | |
| #else | |
| va_start(vargs); | |
| #endif | |
| _PyErr_FormatVFromCause(tstate, exception, format, vargs); | |
| va_end(vargs); | |
| return NULL; | |
| } | |
| /* Convenience functions to set a type error exception and return 0 */ | |
| int | |
| PyErr_BadArgument(void) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_SetString(tstate, PyExc_TypeError, | |
| "bad argument type for built-in operation"); | |
| return 0; | |
| } | |
| PyObject * | |
| _PyErr_NoMemory(PyThreadState *tstate) | |
| { | |
| if (Py_IS_TYPE(PyExc_MemoryError, NULL)) { | |
| /* PyErr_NoMemory() has been called before PyExc_MemoryError has been | |
| initialized by _PyExc_Init() */ | |
| Py_FatalError("Out of memory and PyExc_MemoryError is not " | |
| "initialized yet"); | |
| } | |
| _PyErr_SetNone(tstate, PyExc_MemoryError); | |
| return NULL; | |
| } | |
| PyObject * | |
| PyErr_NoMemory(void) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| return _PyErr_NoMemory(tstate); | |
| } | |
| PyObject * | |
| PyErr_SetFromErrnoWithFilenameObject(PyObject *exc, PyObject *filenameObject) | |
| { | |
| return PyErr_SetFromErrnoWithFilenameObjects(exc, filenameObject, NULL); | |
| } | |
| PyObject * | |
| PyErr_SetFromErrnoWithFilenameObjects(PyObject *exc, PyObject *filenameObject, PyObject *filenameObject2) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| PyObject *message; | |
| PyObject *v, *args; | |
| int i = errno; | |
| #ifdef MS_WINDOWS | |
| WCHAR *s_buf = NULL; | |
| #endif /* Unix/Windows */ | |
| #ifdef EINTR | |
| if (i == EINTR && PyErr_CheckSignals()) | |
| return NULL; | |
| #endif | |
| #ifndef MS_WINDOWS | |
| if (i != 0) { | |
| const char *s = strerror(i); | |
| message = PyUnicode_DecodeLocale(s, "surrogateescape"); | |
| } | |
| else { | |
| /* Sometimes errno didn't get set */ | |
| message = PyUnicode_FromString("Error"); | |
| } | |
| #else | |
| if (i == 0) | |
| message = PyUnicode_FromString("Error"); /* Sometimes errno didn't get set */ | |
| else | |
| { | |
| /* Note that the Win32 errors do not lineup with the | |
| errno error. So if the error is in the MSVC error | |
| table, we use it, otherwise we assume it really _is_ | |
| a Win32 error code | |
| */ | |
| if (i > 0 && i < _sys_nerr) { | |
| message = PyUnicode_FromString(_sys_errlist[i]); | |
| } | |
| else { | |
| int len = FormatMessageW( | |
| FORMAT_MESSAGE_ALLOCATE_BUFFER | | |
| FORMAT_MESSAGE_FROM_SYSTEM | | |
| FORMAT_MESSAGE_IGNORE_INSERTS, | |
| NULL, /* no message source */ | |
| i, | |
| MAKELANGID(LANG_NEUTRAL, | |
| SUBLANG_DEFAULT), | |
| /* Default language */ | |
| (LPWSTR) &s_buf, | |
| 0, /* size not used */ | |
| NULL); /* no args */ | |
| if (len==0) { | |
| /* Only ever seen this in out-of-mem | |
| situations */ | |
| s_buf = NULL; | |
| message = PyUnicode_FromFormat("Windows Error 0x%x", i); | |
| } else { | |
| /* remove trailing cr/lf and dots */ | |
| while (len > 0 && (s_buf[len-1] <= L' ' || s_buf[len-1] == L'.')) | |
| s_buf[--len] = L'\0'; | |
| message = PyUnicode_FromWideChar(s_buf, len); | |
| } | |
| } | |
| } | |
| #endif /* Unix/Windows */ | |
| if (message == NULL) | |
| { | |
| #ifdef MS_WINDOWS | |
| LocalFree(s_buf); | |
| #endif | |
| return NULL; | |
| } | |
| if (filenameObject != NULL) { | |
| if (filenameObject2 != NULL) | |
| args = Py_BuildValue("(iOOiO)", i, message, filenameObject, 0, filenameObject2); | |
| else | |
| args = Py_BuildValue("(iOO)", i, message, filenameObject); | |
| } else { | |
| assert(filenameObject2 == NULL); | |
| args = Py_BuildValue("(iO)", i, message); | |
| } | |
| Py_DECREF(message); | |
| if (args != NULL) { | |
| v = PyObject_Call(exc, args, NULL); | |
| Py_DECREF(args); | |
| if (v != NULL) { | |
| _PyErr_SetObject(tstate, (PyObject *) Py_TYPE(v), v); | |
| Py_DECREF(v); | |
| } | |
| } | |
| #ifdef MS_WINDOWS | |
| LocalFree(s_buf); | |
| #endif | |
| return NULL; | |
| } | |
| PyObject * | |
| PyErr_SetFromErrnoWithFilename(PyObject *exc, const char *filename) | |
| { | |
| PyObject *name = filename ? PyUnicode_DecodeFSDefault(filename) : NULL; | |
| PyObject *result = PyErr_SetFromErrnoWithFilenameObjects(exc, name, NULL); | |
| Py_XDECREF(name); | |
| return result; | |
| } | |
| #ifdef MS_WINDOWS | |
| PyObject * | |
| PyErr_SetFromErrnoWithUnicodeFilename(PyObject *exc, const Py_UNICODE *filename) | |
| { | |
| PyObject *name = filename ? PyUnicode_FromWideChar(filename, -1) : NULL; | |
| PyObject *result = PyErr_SetFromErrnoWithFilenameObjects(exc, name, NULL); | |
| Py_XDECREF(name); | |
| return result; | |
| } | |
| #endif /* MS_WINDOWS */ | |
| PyObject * | |
| PyErr_SetFromErrno(PyObject *exc) | |
| { | |
| return PyErr_SetFromErrnoWithFilenameObjects(exc, NULL, NULL); | |
| } | |
| #ifdef MS_WINDOWS | |
| /* Windows specific error code handling */ | |
| PyObject *PyErr_SetExcFromWindowsErrWithFilenameObject( | |
| PyObject *exc, | |
| int ierr, | |
| PyObject *filenameObject) | |
| { | |
| return PyErr_SetExcFromWindowsErrWithFilenameObjects(exc, ierr, | |
| filenameObject, NULL); | |
| } | |
| PyObject *PyErr_SetExcFromWindowsErrWithFilenameObjects( | |
| PyObject *exc, | |
| int ierr, | |
| PyObject *filenameObject, | |
| PyObject *filenameObject2) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| int len; | |
| WCHAR *s_buf = NULL; /* Free via LocalFree */ | |
| PyObject *message; | |
| PyObject *args, *v; | |
| DWORD err = (DWORD)ierr; | |
| if (err==0) { | |
| err = GetLastError(); | |
| } | |
| len = FormatMessageW( | |
| /* Error API error */ | |
| FORMAT_MESSAGE_ALLOCATE_BUFFER | | |
| FORMAT_MESSAGE_FROM_SYSTEM | | |
| FORMAT_MESSAGE_IGNORE_INSERTS, | |
| NULL, /* no message source */ | |
| err, | |
| MAKELANGID(LANG_NEUTRAL, | |
| SUBLANG_DEFAULT), /* Default language */ | |
| (LPWSTR) &s_buf, | |
| 0, /* size not used */ | |
| NULL); /* no args */ | |
| if (len==0) { | |
| /* Only seen this in out of mem situations */ | |
| message = PyUnicode_FromFormat("Windows Error 0x%x", err); | |
| s_buf = NULL; | |
| } else { | |
| /* remove trailing cr/lf and dots */ | |
| while (len > 0 && (s_buf[len-1] <= L' ' || s_buf[len-1] == L'.')) | |
| s_buf[--len] = L'\0'; | |
| message = PyUnicode_FromWideChar(s_buf, len); | |
| } | |
| if (message == NULL) | |
| { | |
| LocalFree(s_buf); | |
| return NULL; | |
| } | |
| if (filenameObject == NULL) { | |
| assert(filenameObject2 == NULL); | |
| filenameObject = filenameObject2 = Py_None; | |
| } | |
| else if (filenameObject2 == NULL) | |
| filenameObject2 = Py_None; | |
| /* This is the constructor signature for OSError. | |
| The POSIX translation will be figured out by the constructor. */ | |
| args = Py_BuildValue("(iOOiO)", 0, message, filenameObject, err, filenameObject2); | |
| Py_DECREF(message); | |
| if (args != NULL) { | |
| v = PyObject_Call(exc, args, NULL); | |
| Py_DECREF(args); | |
| if (v != NULL) { | |
| _PyErr_SetObject(tstate, (PyObject *) Py_TYPE(v), v); | |
| Py_DECREF(v); | |
| } | |
| } | |
| LocalFree(s_buf); | |
| return NULL; | |
| } | |
| PyObject *PyErr_SetExcFromWindowsErrWithFilename( | |
| PyObject *exc, | |
| int ierr, | |
| const char *filename) | |
| { | |
| PyObject *name = filename ? PyUnicode_DecodeFSDefault(filename) : NULL; | |
| PyObject *ret = PyErr_SetExcFromWindowsErrWithFilenameObjects(exc, | |
| ierr, | |
| name, | |
| NULL); | |
| Py_XDECREF(name); | |
| return ret; | |
| } | |
| PyObject *PyErr_SetExcFromWindowsErrWithUnicodeFilename( | |
| PyObject *exc, | |
| int ierr, | |
| const Py_UNICODE *filename) | |
| { | |
| PyObject *name = filename ? PyUnicode_FromWideChar(filename, -1) : NULL; | |
| PyObject *ret = PyErr_SetExcFromWindowsErrWithFilenameObjects(exc, | |
| ierr, | |
| name, | |
| NULL); | |
| Py_XDECREF(name); | |
| return ret; | |
| } | |
| PyObject *PyErr_SetExcFromWindowsErr(PyObject *exc, int ierr) | |
| { | |
| return PyErr_SetExcFromWindowsErrWithFilename(exc, ierr, NULL); | |
| } | |
| PyObject *PyErr_SetFromWindowsErr(int ierr) | |
| { | |
| return PyErr_SetExcFromWindowsErrWithFilename(PyExc_OSError, | |
| ierr, NULL); | |
| } | |
| PyObject *PyErr_SetFromWindowsErrWithFilename( | |
| int ierr, | |
| const char *filename) | |
| { | |
| PyObject *name = filename ? PyUnicode_DecodeFSDefault(filename) : NULL; | |
| PyObject *result = PyErr_SetExcFromWindowsErrWithFilenameObjects( | |
| PyExc_OSError, | |
| ierr, name, NULL); | |
| Py_XDECREF(name); | |
| return result; | |
| } | |
| PyObject *PyErr_SetFromWindowsErrWithUnicodeFilename( | |
| int ierr, | |
| const Py_UNICODE *filename) | |
| { | |
| PyObject *name = filename ? PyUnicode_FromWideChar(filename, -1) : NULL; | |
| PyObject *result = PyErr_SetExcFromWindowsErrWithFilenameObjects( | |
| PyExc_OSError, | |
| ierr, name, NULL); | |
| Py_XDECREF(name); | |
| return result; | |
| } | |
| #endif /* MS_WINDOWS */ | |
| PyObject * | |
| PyErr_SetImportErrorSubclass(PyObject *exception, PyObject *msg, | |
| PyObject *name, PyObject *path) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| int issubclass; | |
| PyObject *kwargs, *error; | |
| issubclass = PyObject_IsSubclass(exception, PyExc_ImportError); | |
| if (issubclass < 0) { | |
| return NULL; | |
| } | |
| else if (!issubclass) { | |
| _PyErr_SetString(tstate, PyExc_TypeError, | |
| "expected a subclass of ImportError"); | |
| return NULL; | |
| } | |
| if (msg == NULL) { | |
| _PyErr_SetString(tstate, PyExc_TypeError, | |
| "expected a message argument"); | |
| return NULL; | |
| } | |
| if (name == NULL) { | |
| name = Py_None; | |
| } | |
| if (path == NULL) { | |
| path = Py_None; | |
| } | |
| kwargs = PyDict_New(); | |
| if (kwargs == NULL) { | |
| return NULL; | |
| } | |
| if (PyDict_SetItemString(kwargs, "name", name) < 0) { | |
| goto done; | |
| } | |
| if (PyDict_SetItemString(kwargs, "path", path) < 0) { | |
| goto done; | |
| } | |
| error = PyObject_VectorcallDict(exception, &msg, 1, kwargs); | |
| if (error != NULL) { | |
| _PyErr_SetObject(tstate, (PyObject *)Py_TYPE(error), error); | |
| Py_DECREF(error); | |
| } | |
| done: | |
| Py_DECREF(kwargs); | |
| return NULL; | |
| } | |
| PyObject * | |
| PyErr_SetImportError(PyObject *msg, PyObject *name, PyObject *path) | |
| { | |
| return PyErr_SetImportErrorSubclass(PyExc_ImportError, msg, name, path); | |
| } | |
| void | |
| _PyErr_BadInternalCall(const char *filename, int lineno) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_Format(tstate, PyExc_SystemError, | |
| "%s:%d: bad argument to internal function", | |
| filename, lineno); | |
| } | |
| /* Remove the preprocessor macro for PyErr_BadInternalCall() so that we can | |
| export the entry point for existing object code: */ | |
| #undef PyErr_BadInternalCall | |
| void | |
| PyErr_BadInternalCall(void) | |
| { | |
| assert(0 && "bad argument to internal function"); | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _PyErr_SetString(tstate, PyExc_SystemError, | |
| "bad argument to internal function"); | |
| } | |
| #define PyErr_BadInternalCall() _PyErr_BadInternalCall(__FILE__, __LINE__) | |
| static PyObject * | |
| _PyErr_FormatV(PyThreadState *tstate, PyObject *exception, | |
| const char *format, va_list vargs) | |
| { | |
| PyObject* string; | |
| /* Issue #23571: PyUnicode_FromFormatV() must not be called with an | |
| exception set, it calls arbitrary Python code like PyObject_Repr() */ | |
| _PyErr_Clear(tstate); | |
| string = PyUnicode_FromFormatV(format, vargs); | |
| _PyErr_SetObject(tstate, exception, string); | |
| Py_XDECREF(string); | |
| return NULL; | |
| } | |
| PyObject * | |
| PyErr_FormatV(PyObject *exception, const char *format, va_list vargs) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| return _PyErr_FormatV(tstate, exception, format, vargs); | |
| } | |
| PyObject * | |
| _PyErr_Format(PyThreadState *tstate, PyObject *exception, | |
| const char *format, ...) | |
| { | |
| va_list vargs; | |
| #ifdef HAVE_STDARG_PROTOTYPES | |
| va_start(vargs, format); | |
| #else | |
| va_start(vargs); | |
| #endif | |
| _PyErr_FormatV(tstate, exception, format, vargs); | |
| va_end(vargs); | |
| return NULL; | |
| } | |
| PyObject * | |
| PyErr_Format(PyObject *exception, const char *format, ...) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| va_list vargs; | |
| #ifdef HAVE_STDARG_PROTOTYPES | |
| va_start(vargs, format); | |
| #else | |
| va_start(vargs); | |
| #endif | |
| _PyErr_FormatV(tstate, exception, format, vargs); | |
| va_end(vargs); | |
| return NULL; | |
| } | |
| PyObject * | |
| PyErr_NewException(const char *name, PyObject *base, PyObject *dict) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| PyObject *modulename = NULL; | |
| PyObject *classname = NULL; | |
| PyObject *mydict = NULL; | |
| PyObject *bases = NULL; | |
| PyObject *result = NULL; | |
| const char *dot = strrchr(name, '.'); | |
| if (dot == NULL) { | |
| _PyErr_SetString(tstate, PyExc_SystemError, | |
| "PyErr_NewException: name must be module.class"); | |
| return NULL; | |
| } | |
| if (base == NULL) { | |
| base = PyExc_Exception; | |
| } | |
| if (dict == NULL) { | |
| dict = mydict = PyDict_New(); | |
| if (dict == NULL) | |
| goto failure; | |
| } | |
| if (_PyDict_GetItemIdWithError(dict, &PyId___module__) == NULL) { | |
| if (_PyErr_Occurred(tstate)) { | |
| goto failure; | |
| } | |
| modulename = PyUnicode_FromStringAndSize(name, | |
| (Py_ssize_t)(dot-name)); | |
| if (modulename == NULL) | |
| goto failure; | |
| if (_PyDict_SetItemId(dict, &PyId___module__, modulename) != 0) | |
| goto failure; | |
| } | |
| if (PyTuple_Check(base)) { | |
| bases = base; | |
| /* INCREF as we create a new ref in the else branch */ | |
| Py_INCREF(bases); | |
| } else { | |
| bases = PyTuple_Pack(1, base); | |
| if (bases == NULL) | |
| goto failure; | |
| } | |
| /* Create a real class. */ | |
| result = PyObject_CallFunction((PyObject *)&PyType_Type, "sOO", | |
| dot+1, bases, dict); | |
| failure: | |
| Py_XDECREF(bases); | |
| Py_XDECREF(mydict); | |
| Py_XDECREF(classname); | |
| Py_XDECREF(modulename); | |
| return result; | |
| } | |
| /* Create an exception with docstring */ | |
| PyObject * | |
| PyErr_NewExceptionWithDoc(const char *name, const char *doc, | |
| PyObject *base, PyObject *dict) | |
| { | |
| int result; | |
| PyObject *ret = NULL; | |
| PyObject *mydict = NULL; /* points to the dict only if we create it */ | |
| PyObject *docobj; | |
| if (dict == NULL) { | |
| dict = mydict = PyDict_New(); | |
| if (dict == NULL) { | |
| return NULL; | |
| } | |
| } | |
| if (doc != NULL) { | |
| docobj = PyUnicode_FromString(doc); | |
| if (docobj == NULL) | |
| goto failure; | |
| result = PyDict_SetItemString(dict, "__doc__", docobj); | |
| Py_DECREF(docobj); | |
| if (result < 0) | |
| goto failure; | |
| } | |
| ret = PyErr_NewException(name, base, dict); | |
| failure: | |
| Py_XDECREF(mydict); | |
| return ret; | |
| } | |
| PyDoc_STRVAR(UnraisableHookArgs__doc__, | |
| "UnraisableHookArgs\n\ | |
| \n\ | |
| Type used to pass arguments to sys.unraisablehook."); | |
| static PyTypeObject UnraisableHookArgsType; | |
| static PyStructSequence_Field UnraisableHookArgs_fields[] = { | |
| {"exc_type", "Exception type"}, | |
| {"exc_value", "Exception value"}, | |
| {"exc_traceback", "Exception traceback"}, | |
| {"err_msg", "Error message"}, | |
| {"object", "Object causing the exception"}, | |
| {0} | |
| }; | |
| static PyStructSequence_Desc UnraisableHookArgs_desc = { | |
| .name = "UnraisableHookArgs", | |
| .doc = UnraisableHookArgs__doc__, | |
| .fields = UnraisableHookArgs_fields, | |
| .n_in_sequence = 5 | |
| }; | |
| PyStatus | |
| _PyErr_Init(void) | |
| { | |
| if (UnraisableHookArgsType.tp_name == NULL) { | |
| if (PyStructSequence_InitType2(&UnraisableHookArgsType, | |
| &UnraisableHookArgs_desc) < 0) { | |
| return _PyStatus_ERR("failed to initialize UnraisableHookArgs type"); | |
| } | |
| } | |
| return _PyStatus_OK(); | |
| } | |
| static PyObject * | |
| make_unraisable_hook_args(PyThreadState *tstate, PyObject *exc_type, | |
| PyObject *exc_value, PyObject *exc_tb, | |
| PyObject *err_msg, PyObject *obj) | |
| { | |
| PyObject *args = PyStructSequence_New(&UnraisableHookArgsType); | |
| if (args == NULL) { | |
| return NULL; | |
| } | |
| Py_ssize_t pos = 0; | |
| #define ADD_ITEM(exc_type) \ | |
| do { \ | |
| if (exc_type == NULL) { \ | |
| exc_type = Py_None; \ | |
| } \ | |
| Py_INCREF(exc_type); \ | |
| PyStructSequence_SET_ITEM(args, pos++, exc_type); \ | |
| } while (0) | |
| ADD_ITEM(exc_type); | |
| ADD_ITEM(exc_value); | |
| ADD_ITEM(exc_tb); | |
| ADD_ITEM(err_msg); | |
| ADD_ITEM(obj); | |
| #undef ADD_ITEM | |
| if (_PyErr_Occurred(tstate)) { | |
| Py_DECREF(args); | |
| return NULL; | |
| } | |
| return args; | |
| } | |
| /* Default implementation of sys.unraisablehook. | |
| It can be called to log the exception of a custom sys.unraisablehook. | |
| Do nothing if sys.stderr attribute doesn't exist or is set to None. */ | |
| static int | |
| write_unraisable_exc_file(PyThreadState *tstate, PyObject *exc_type, | |
| PyObject *exc_value, PyObject *exc_tb, | |
| PyObject *err_msg, PyObject *obj, PyObject *file) | |
| { | |
| if (obj != NULL && obj != Py_None) { | |
| if (err_msg != NULL && err_msg != Py_None) { | |
| if (PyFile_WriteObject(err_msg, file, Py_PRINT_RAW) < 0) { | |
| return -1; | |
| } | |
| if (PyFile_WriteString(": ", file) < 0) { | |
| return -1; | |
| } | |
| } | |
| else { | |
| if (PyFile_WriteString("Exception ignored in: ", file) < 0) { | |
| return -1; | |
| } | |
| } | |
| if (PyFile_WriteObject(obj, file, 0) < 0) { | |
| _PyErr_Clear(tstate); | |
| if (PyFile_WriteString("<object repr() failed>", file) < 0) { | |
| return -1; | |
| } | |
| } | |
| if (PyFile_WriteString("\n", file) < 0) { | |
| return -1; | |
| } | |
| } | |
| else if (err_msg != NULL && err_msg != Py_None) { | |
| if (PyFile_WriteObject(err_msg, file, Py_PRINT_RAW) < 0) { | |
| return -1; | |
| } | |
| if (PyFile_WriteString(":\n", file) < 0) { | |
| return -1; | |
| } | |
| } | |
| if (exc_tb != NULL && exc_tb != Py_None) { | |
| if (PyTraceBack_Print(exc_tb, file) < 0) { | |
| /* continue even if writing the traceback failed */ | |
| _PyErr_Clear(tstate); | |
| } | |
| } | |
| if (exc_type == NULL || exc_type == Py_None) { | |
| return -1; | |
| } | |
| assert(PyExceptionClass_Check(exc_type)); | |
| const char *className = PyExceptionClass_Name(exc_type); | |
| if (className != NULL) { | |
| const char *dot = strrchr(className, '.'); | |
| if (dot != NULL) { | |
| className = dot+1; | |
| } | |
| } | |
| PyObject *moduleName = _PyObject_GetAttrId(exc_type, &PyId___module__); | |
| if (moduleName == NULL || !PyUnicode_Check(moduleName)) { | |
| Py_XDECREF(moduleName); | |
| _PyErr_Clear(tstate); | |
| if (PyFile_WriteString("<unknown>", file) < 0) { | |
| return -1; | |
| } | |
| } | |
| else { | |
| if (!_PyUnicode_EqualToASCIIId(moduleName, &PyId_builtins)) { | |
| if (PyFile_WriteObject(moduleName, file, Py_PRINT_RAW) < 0) { | |
| Py_DECREF(moduleName); | |
| return -1; | |
| } | |
| Py_DECREF(moduleName); | |
| if (PyFile_WriteString(".", file) < 0) { | |
| return -1; | |
| } | |
| } | |
| else { | |
| Py_DECREF(moduleName); | |
| } | |
| } | |
| if (className == NULL) { | |
| if (PyFile_WriteString("<unknown>", file) < 0) { | |
| return -1; | |
| } | |
| } | |
| else { | |
| if (PyFile_WriteString(className, file) < 0) { | |
| return -1; | |
| } | |
| } | |
| if (exc_value && exc_value != Py_None) { | |
| if (PyFile_WriteString(": ", file) < 0) { | |
| return -1; | |
| } | |
| if (PyFile_WriteObject(exc_value, file, Py_PRINT_RAW) < 0) { | |
| _PyErr_Clear(tstate); | |
| if (PyFile_WriteString("<exception str() failed>", file) < 0) { | |
| return -1; | |
| } | |
| } | |
| } | |
| if (PyFile_WriteString("\n", file) < 0) { | |
| return -1; | |
| } | |
| /* Explicitly call file.flush() */ | |
| PyObject *res = _PyObject_CallMethodIdNoArgs(file, &PyId_flush); | |
| if (!res) { | |
| return -1; | |
| } | |
| Py_DECREF(res); | |
| return 0; | |
| } | |
| static int | |
| write_unraisable_exc(PyThreadState *tstate, PyObject *exc_type, | |
| PyObject *exc_value, PyObject *exc_tb, PyObject *err_msg, | |
| PyObject *obj) | |
| { | |
| PyObject *file = _PySys_GetObjectId(&PyId_stderr); | |
| if (file == NULL || file == Py_None) { | |
| return 0; | |
| } | |
| /* Hold a strong reference to ensure that sys.stderr doesn't go away | |
| while we use it */ | |
| Py_INCREF(file); | |
| int res = write_unraisable_exc_file(tstate, exc_type, exc_value, exc_tb, | |
| err_msg, obj, file); | |
| Py_DECREF(file); | |
| return res; | |
| } | |
| PyObject* | |
| _PyErr_WriteUnraisableDefaultHook(PyObject *args) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| if (!Py_IS_TYPE(args, &UnraisableHookArgsType)) { | |
| _PyErr_SetString(tstate, PyExc_TypeError, | |
| "sys.unraisablehook argument type " | |
| "must be UnraisableHookArgs"); | |
| return NULL; | |
| } | |
| /* Borrowed references */ | |
| PyObject *exc_type = PyStructSequence_GET_ITEM(args, 0); | |
| PyObject *exc_value = PyStructSequence_GET_ITEM(args, 1); | |
| PyObject *exc_tb = PyStructSequence_GET_ITEM(args, 2); | |
| PyObject *err_msg = PyStructSequence_GET_ITEM(args, 3); | |
| PyObject *obj = PyStructSequence_GET_ITEM(args, 4); | |
| if (write_unraisable_exc(tstate, exc_type, exc_value, exc_tb, err_msg, obj) < 0) { | |
| return NULL; | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| /* Call sys.unraisablehook(). | |
| This function can be used when an exception has occurred but there is no way | |
| for Python to handle it. For example, when a destructor raises an exception | |
| or during garbage collection (gc.collect()). | |
| If err_msg_str is non-NULL, the error message is formatted as: | |
| "Exception ignored %s" % err_msg_str. Otherwise, use "Exception ignored in" | |
| error message. | |
| An exception must be set when calling this function. */ | |
| void | |
| _PyErr_WriteUnraisableMsg(const char *err_msg_str, PyObject *obj) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| _Py_EnsureTstateNotNULL(tstate); | |
| PyObject *err_msg = NULL; | |
| PyObject *exc_type, *exc_value, *exc_tb; | |
| _PyErr_Fetch(tstate, &exc_type, &exc_value, &exc_tb); | |
| assert(exc_type != NULL); | |
| if (exc_type == NULL) { | |
| /* sys.unraisablehook requires that at least exc_type is set */ | |
| goto default_hook; | |
| } | |
| if (exc_tb == NULL) { | |
| PyFrameObject *frame = tstate->frame; | |
| if (frame != NULL) { | |
| exc_tb = _PyTraceBack_FromFrame(NULL, frame); | |
| if (exc_tb == NULL) { | |
| _PyErr_Clear(tstate); | |
| } | |
| } | |
| } | |
| _PyErr_NormalizeException(tstate, &exc_type, &exc_value, &exc_tb); | |
| if (exc_tb != NULL && exc_tb != Py_None && PyTraceBack_Check(exc_tb)) { | |
| if (PyException_SetTraceback(exc_value, exc_tb) < 0) { | |
| _PyErr_Clear(tstate); | |
| } | |
| } | |
| if (err_msg_str != NULL) { | |
| err_msg = PyUnicode_FromFormat("Exception ignored %s", err_msg_str); | |
| if (err_msg == NULL) { | |
| PyErr_Clear(); | |
| } | |
| } | |
| PyObject *hook_args = make_unraisable_hook_args( | |
| tstate, exc_type, exc_value, exc_tb, err_msg, obj); | |
| if (hook_args == NULL) { | |
| err_msg_str = ("Exception ignored on building " | |
| "sys.unraisablehook arguments"); | |
| goto error; | |
| } | |
| _Py_IDENTIFIER(unraisablehook); | |
| PyObject *hook = _PySys_GetObjectId(&PyId_unraisablehook); | |
| if (hook == NULL) { | |
| Py_DECREF(hook_args); | |
| goto default_hook; | |
| } | |
| if (_PySys_Audit(tstate, "sys.unraisablehook", "OO", hook, hook_args) < 0) { | |
| Py_DECREF(hook_args); | |
| err_msg_str = "Exception ignored in audit hook"; | |
| obj = NULL; | |
| goto error; | |
| } | |
| if (hook == Py_None) { | |
| Py_DECREF(hook_args); | |
| goto default_hook; | |
| } | |
| PyObject *res = PyObject_CallOneArg(hook, hook_args); | |
| Py_DECREF(hook_args); | |
| if (res != NULL) { | |
| Py_DECREF(res); | |
| goto done; | |
| } | |
| /* sys.unraisablehook failed: log its error using default hook */ | |
| obj = hook; | |
| err_msg_str = NULL; | |
| error: | |
| /* err_msg_str and obj have been updated and we have a new exception */ | |
| Py_XSETREF(err_msg, PyUnicode_FromString(err_msg_str ? | |
| err_msg_str : "Exception ignored in sys.unraisablehook")); | |
| Py_XDECREF(exc_type); | |
| Py_XDECREF(exc_value); | |
| Py_XDECREF(exc_tb); | |
| _PyErr_Fetch(tstate, &exc_type, &exc_value, &exc_tb); | |
| default_hook: | |
| /* Call the default unraisable hook (ignore failure) */ | |
| (void)write_unraisable_exc(tstate, exc_type, exc_value, exc_tb, | |
| err_msg, obj); | |
| done: | |
| Py_XDECREF(exc_type); | |
| Py_XDECREF(exc_value); | |
| Py_XDECREF(exc_tb); | |
| Py_XDECREF(err_msg); | |
| _PyErr_Clear(tstate); /* Just in case */ | |
| } | |
| void | |
| PyErr_WriteUnraisable(PyObject *obj) | |
| { | |
| _PyErr_WriteUnraisableMsg(NULL, obj); | |
| } | |
| extern PyObject *PyModule_GetWarningsModule(void); | |
| void | |
| PyErr_SyntaxLocation(const char *filename, int lineno) | |
| { | |
| PyErr_SyntaxLocationEx(filename, lineno, -1); | |
| } | |
| /* Set file and line information for the current exception. | |
| If the exception is not a SyntaxError, also sets additional attributes | |
| to make printing of exceptions believe it is a syntax error. */ | |
| void | |
| PyErr_SyntaxLocationObject(PyObject *filename, int lineno, int col_offset) | |
| { | |
| PyObject *exc, *v, *tb, *tmp; | |
| _Py_IDENTIFIER(filename); | |
| _Py_IDENTIFIER(lineno); | |
| _Py_IDENTIFIER(msg); | |
| _Py_IDENTIFIER(offset); | |
| _Py_IDENTIFIER(print_file_and_line); | |
| _Py_IDENTIFIER(text); | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| /* add attributes for the line number and filename for the error */ | |
| _PyErr_Fetch(tstate, &exc, &v, &tb); | |
| _PyErr_NormalizeException(tstate, &exc, &v, &tb); | |
| /* XXX check that it is, indeed, a syntax error. It might not | |
| * be, though. */ | |
| tmp = PyLong_FromLong(lineno); | |
| if (tmp == NULL) | |
| _PyErr_Clear(tstate); | |
| else { | |
| if (_PyObject_SetAttrId(v, &PyId_lineno, tmp)) { | |
| _PyErr_Clear(tstate); | |
| } | |
| Py_DECREF(tmp); | |
| } | |
| tmp = NULL; | |
| if (col_offset >= 0) { | |
| tmp = PyLong_FromLong(col_offset); | |
| if (tmp == NULL) { | |
| _PyErr_Clear(tstate); | |
| } | |
| } | |
| if (_PyObject_SetAttrId(v, &PyId_offset, tmp ? tmp : Py_None)) { | |
| _PyErr_Clear(tstate); | |
| } | |
| Py_XDECREF(tmp); | |
| if (filename != NULL) { | |
| if (_PyObject_SetAttrId(v, &PyId_filename, filename)) { | |
| _PyErr_Clear(tstate); | |
| } | |
| tmp = PyErr_ProgramTextObject(filename, lineno); | |
| if (tmp) { | |
| if (_PyObject_SetAttrId(v, &PyId_text, tmp)) { | |
| _PyErr_Clear(tstate); | |
| } | |
| Py_DECREF(tmp); | |
| } | |
| } | |
| if (exc != PyExc_SyntaxError) { | |
| if (!_PyObject_HasAttrId(v, &PyId_msg)) { | |
| tmp = PyObject_Str(v); | |
| if (tmp) { | |
| if (_PyObject_SetAttrId(v, &PyId_msg, tmp)) { | |
| _PyErr_Clear(tstate); | |
| } | |
| Py_DECREF(tmp); | |
| } | |
| else { | |
| _PyErr_Clear(tstate); | |
| } | |
| } | |
| if (!_PyObject_HasAttrId(v, &PyId_print_file_and_line)) { | |
| if (_PyObject_SetAttrId(v, &PyId_print_file_and_line, | |
| Py_None)) { | |
| _PyErr_Clear(tstate); | |
| } | |
| } | |
| } | |
| _PyErr_Restore(tstate, exc, v, tb); | |
| } | |
| void | |
| PyErr_SyntaxLocationEx(const char *filename, int lineno, int col_offset) | |
| { | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| PyObject *fileobj; | |
| if (filename != NULL) { | |
| fileobj = PyUnicode_DecodeFSDefault(filename); | |
| if (fileobj == NULL) { | |
| _PyErr_Clear(tstate); | |
| } | |
| } | |
| else { | |
| fileobj = NULL; | |
| } | |
| PyErr_SyntaxLocationObject(fileobj, lineno, col_offset); | |
| Py_XDECREF(fileobj); | |
| } | |
| /* Attempt to load the line of text that the exception refers to. If it | |
| fails, it will return NULL but will not set an exception. | |
| XXX The functionality of this function is quite similar to the | |
| functionality in tb_displayline() in traceback.c. */ | |
| static PyObject * | |
| err_programtext(PyThreadState *tstate, FILE *fp, int lineno) | |
| { | |
| int i; | |
| char linebuf[1000]; | |
| if (fp == NULL) { | |
| return NULL; | |
| } | |
| for (i = 0; i < lineno; i++) { | |
| char *pLastChar = &linebuf[sizeof(linebuf) - 2]; | |
| do { | |
| *pLastChar = '\0'; | |
| if (Py_UniversalNewlineFgets(linebuf, sizeof linebuf, | |
| fp, NULL) == NULL) { | |
| goto after_loop; | |
| } | |
| /* fgets read *something*; if it didn't get as | |
| far as pLastChar, it must have found a newline | |
| or hit the end of the file; if pLastChar is \n, | |
| it obviously found a newline; else we haven't | |
| yet seen a newline, so must continue */ | |
| } while (*pLastChar != '\0' && *pLastChar != '\n'); | |
| } | |
| after_loop: | |
| fclose(fp); | |
| if (i == lineno) { | |
| PyObject *res; | |
| res = PyUnicode_FromString(linebuf); | |
| if (res == NULL) | |
| _PyErr_Clear(tstate); | |
| return res; | |
| } | |
| return NULL; | |
| } | |
| PyObject * | |
| PyErr_ProgramText(const char *filename, int lineno) | |
| { | |
| FILE *fp; | |
| if (filename == NULL || *filename == '\0' || lineno <= 0) { | |
| return NULL; | |
| } | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| fp = _Py_fopen(filename, "r" PY_STDIOTEXTMODE); | |
| return err_programtext(tstate, fp, lineno); | |
| } | |
| PyObject * | |
| PyErr_ProgramTextObject(PyObject *filename, int lineno) | |
| { | |
| if (filename == NULL || lineno <= 0) { | |
| return NULL; | |
| } | |
| PyThreadState *tstate = _PyThreadState_GET(); | |
| FILE *fp = _Py_fopen_obj(filename, "r" PY_STDIOTEXTMODE); | |
| if (fp == NULL) { | |
| _PyErr_Clear(tstate); | |
| return NULL; | |
| } | |
| return err_programtext(tstate, fp, lineno); | |
| } | |
| #ifdef __cplusplus | |
| } | |
| #endif |