Google Git Google Git
Sign in
android/platform/external/python/cpython3/refs/heads/android12L-dev/./Doc/c-api/unicode.rst
blob: 8a312ae90ed6412e743cc40d33d54b6a241799cd [file] [edit]
.. highlight:: c
.. _unicodeobjects:
Unicode Objects and Codecs
--------------------------
.. sectionauthor:: Marc-André Lemburg <mal@lemburg.com>
.. sectionauthor:: Georg Brandl <georg@python.org>
Unicode Objects
^^^^^^^^^^^^^^^
Since the implementation of :pep:`393` in Python 3.3, Unicode objects internally
use a variety of representations, in order to allow handling the complete range
of Unicode characters while staying memory efficient. There are special cases
for strings where all code points are below 128, 256, or 65536; otherwise, code
points must be below 1114112 (which is the full Unicode range).
:c:type:`Py_UNICODE*` and UTF-8 representations are created on demand and cached
in the Unicode object. The :c:type:`Py_UNICODE*` representation is deprecated
and inefficient; it should be avoided in performance- or memory-sensitive
situations.
Due to the transition between the old APIs and the new APIs, Unicode objects
can internally be in two states depending on how they were created:
* "canonical" Unicode objects are all objects created by a non-deprecated
Unicode API. They use the most efficient representation allowed by the
implementation.
* "legacy" Unicode objects have been created through one of the deprecated
APIs (typically :c:func:`PyUnicode_FromUnicode`) and only bear the
:c:type:`Py_UNICODE*` representation; you will have to call
:c:func:`PyUnicode_READY` on them before calling any other API.
.. note::
The "legacy" Unicode object will be removed in Python 3.12 with deprecated
APIs. All Unicode objects will be "canonical" since then. See :pep:`623`
for more information.
Unicode Type
""""""""""""
These are the basic Unicode object types used for the Unicode implementation in
Python:
.. c:type:: Py_UCS4
Py_UCS2
Py_UCS1
These types are typedefs for unsigned integer types wide enough to contain
characters of 32 bits, 16 bits and 8 bits, respectively. When dealing with
single Unicode characters, use :c:type:`Py_UCS4`.
.. versionadded:: 3.3
.. c:type:: Py_UNICODE
This is a typedef of :c:type:`wchar_t`, which is a 16-bit type or 32-bit type
depending on the platform.
.. versionchanged:: 3.3
In previous versions, this was a 16-bit type or a 32-bit type depending on
whether you selected a "narrow" or "wide" Unicode version of Python at
build time.
.. c:type:: PyASCIIObject
PyCompactUnicodeObject
PyUnicodeObject
These subtypes of :c:type:`PyObject` represent a Python Unicode object. In
almost all cases, they shouldn't be used directly, since all API functions
that deal with Unicode objects take and return :c:type:`PyObject` pointers.
.. versionadded:: 3.3
.. c:var:: PyTypeObject PyUnicode_Type
This instance of :c:type:`PyTypeObject` represents the Python Unicode type. It
is exposed to Python code as ``str``.
The following APIs are really C macros and can be used to do fast checks and to
access internal read-only data of Unicode objects:
.. c:function:: int PyUnicode_Check(PyObject *o)
Return true if the object *o* is a Unicode object or an instance of a Unicode
subtype.
.. c:function:: int PyUnicode_CheckExact(PyObject *o)
Return true if the object *o* is a Unicode object, but not an instance of a
subtype.
.. c:function:: int PyUnicode_READY(PyObject *o)
Ensure the string object *o* is in the "canonical" representation. This is
required before using any of the access macros described below.
.. XXX expand on when it is not required
Returns ``0`` on success and ``-1`` with an exception set on failure, which in
particular happens if memory allocation fails.
.. versionadded:: 3.3
.. deprecated-removed:: 3.10 3.12
This API will be removed with :c:func:`PyUnicode_FromUnicode`.
.. c:function:: Py_ssize_t PyUnicode_GET_LENGTH(PyObject *o)
Return the length of the Unicode string, in code points. *o* has to be a
Unicode object in the "canonical" representation (not checked).
.. versionadded:: 3.3
.. c:function:: Py_UCS1* PyUnicode_1BYTE_DATA(PyObject *o)
Py_UCS2* PyUnicode_2BYTE_DATA(PyObject *o)
Py_UCS4* PyUnicode_4BYTE_DATA(PyObject *o)
Return a pointer to the canonical representation cast to UCS1, UCS2 or UCS4
integer types for direct character access. No checks are performed if the
canonical representation has the correct character size; use
:c:func:`PyUnicode_KIND` to select the right macro. Make sure
:c:func:`PyUnicode_READY` has been called before accessing this.
.. versionadded:: 3.3
.. c:macro:: PyUnicode_WCHAR_KIND
PyUnicode_1BYTE_KIND
PyUnicode_2BYTE_KIND
PyUnicode_4BYTE_KIND
Return values of the :c:func:`PyUnicode_KIND` macro.
.. versionadded:: 3.3
.. deprecated-removed:: 3.10 3.12
``PyUnicode_WCHAR_KIND`` is deprecated.
.. c:function:: int PyUnicode_KIND(PyObject *o)
Return one of the PyUnicode kind constants (see above) that indicate how many
bytes per character this Unicode object uses to store its data. *o* has to
be a Unicode object in the "canonical" representation (not checked).
.. XXX document "0" return value?
.. versionadded:: 3.3
.. c:function:: void* PyUnicode_DATA(PyObject *o)
Return a void pointer to the raw Unicode buffer. *o* has to be a Unicode
object in the "canonical" representation (not checked).
.. versionadded:: 3.3
.. c:function:: void PyUnicode_WRITE(int kind, void *data, Py_ssize_t index, \
Py_UCS4 value)
Write into a canonical representation *data* (as obtained with
:c:func:`PyUnicode_DATA`). This macro does not do any sanity checks and is
intended for usage in loops. The caller should cache the *kind* value and
*data* pointer as obtained from other macro calls. *index* is the index in
the string (starts at 0) and *value* is the new code point value which should
be written to that location.
.. versionadded:: 3.3
.. c:function:: Py_UCS4 PyUnicode_READ(int kind, void *data, Py_ssize_t index)
Read a code point from a canonical representation *data* (as obtained with
:c:func:`PyUnicode_DATA`). No checks or ready calls are performed.
.. versionadded:: 3.3
.. c:function:: Py_UCS4 PyUnicode_READ_CHAR(PyObject *o, Py_ssize_t index)
Read a character from a Unicode object *o*, which must be in the "canonical"
representation. This is less efficient than :c:func:`PyUnicode_READ` if you
do multiple consecutive reads.
.. versionadded:: 3.3
.. c:macro:: PyUnicode_MAX_CHAR_VALUE(o)
Return the maximum code point that is suitable for creating another string
based on *o*, which must be in the "canonical" representation. This is
always an approximation but more efficient than iterating over the string.
.. versionadded:: 3.3
.. c:function:: Py_ssize_t PyUnicode_GET_SIZE(PyObject *o)
Return the size of the deprecated :c:type:`Py_UNICODE` representation, in
code units (this includes surrogate pairs as 2 units). *o* has to be a
Unicode object (not checked).
.. deprecated-removed:: 3.3 3.12
Part of the old-style Unicode API, please migrate to using
:c:func:`PyUnicode_GET_LENGTH`.
.. c:function:: Py_ssize_t PyUnicode_GET_DATA_SIZE(PyObject *o)
Return the size of the deprecated :c:type:`Py_UNICODE` representation in
bytes. *o* has to be a Unicode object (not checked).
.. deprecated-removed:: 3.3 3.12
Part of the old-style Unicode API, please migrate to using
:c:func:`PyUnicode_GET_LENGTH`.
.. c:function:: Py_UNICODE* PyUnicode_AS_UNICODE(PyObject *o)
const char* PyUnicode_AS_DATA(PyObject *o)
Return a pointer to a :c:type:`Py_UNICODE` representation of the object. The
returned buffer is always terminated with an extra null code point. It
may also contain embedded null code points, which would cause the string
to be truncated when used in most C functions. The ``AS_DATA`` form
casts the pointer to :c:type:`const char *`. The *o* argument has to be
a Unicode object (not checked).
.. versionchanged:: 3.3
This macro is now inefficient -- because in many cases the
:c:type:`Py_UNICODE` representation does not exist and needs to be created
-- and can fail (return ``NULL`` with an exception set). Try to port the
code to use the new :c:func:`PyUnicode_nBYTE_DATA` macros or use
:c:func:`PyUnicode_WRITE` or :c:func:`PyUnicode_READ`.
.. deprecated-removed:: 3.3 3.12
Part of the old-style Unicode API, please migrate to using the
:c:func:`PyUnicode_nBYTE_DATA` family of macros.
.. c:function:: int PyUnicode_IsIdentifier(PyObject *o)
Return ``1`` if the string is a valid identifier according to the language
definition, section :ref:`identifiers`. Return ``0`` otherwise.
.. versionchanged:: 3.9
The function does not call :c:func:`Py_FatalError` anymore if the string
is not ready.
Unicode Character Properties
""""""""""""""""""""""""""""
Unicode provides many different character properties. The most often needed ones
are available through these macros which are mapped to C functions depending on
the Python configuration.
.. c:function:: int Py_UNICODE_ISSPACE(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is a whitespace character.
.. c:function:: int Py_UNICODE_ISLOWER(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is a lowercase character.
.. c:function:: int Py_UNICODE_ISUPPER(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is an uppercase character.
.. c:function:: int Py_UNICODE_ISTITLE(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is a titlecase character.
.. c:function:: int Py_UNICODE_ISLINEBREAK(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is a linebreak character.
.. c:function:: int Py_UNICODE_ISDECIMAL(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is a decimal character.
.. c:function:: int Py_UNICODE_ISDIGIT(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is a digit character.
.. c:function:: int Py_UNICODE_ISNUMERIC(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is a numeric character.
.. c:function:: int Py_UNICODE_ISALPHA(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is an alphabetic character.
.. c:function:: int Py_UNICODE_ISALNUM(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is an alphanumeric character.
.. c:function:: int Py_UNICODE_ISPRINTABLE(Py_UNICODE ch)
Return ``1`` or ``0`` depending on whether *ch* is a printable character.
Nonprintable characters are those characters defined in the Unicode character
database as "Other" or "Separator", excepting the ASCII space (0x20) which is
considered printable. (Note that printable characters in this context are
those which should not be escaped when :func:`repr` is invoked on a string.
It has no bearing on the handling of strings written to :data:`sys.stdout` or
:data:`sys.stderr`.)
These APIs can be used for fast direct character conversions:
.. c:function:: Py_UNICODE Py_UNICODE_TOLOWER(Py_UNICODE ch)
Return the character *ch* converted to lower case.
.. deprecated:: 3.3
This function uses simple case mappings.
.. c:function:: Py_UNICODE Py_UNICODE_TOUPPER(Py_UNICODE ch)
Return the character *ch* converted to upper case.
.. deprecated:: 3.3
This function uses simple case mappings.
.. c:function:: Py_UNICODE Py_UNICODE_TOTITLE(Py_UNICODE ch)
Return the character *ch* converted to title case.
.. deprecated:: 3.3
This function uses simple case mappings.
.. c:function:: int Py_UNICODE_TODECIMAL(Py_UNICODE ch)
Return the character *ch* converted to a decimal positive integer. Return
``-1`` if this is not possible. This macro does not raise exceptions.
.. c:function:: int Py_UNICODE_TODIGIT(Py_UNICODE ch)
Return the character *ch* converted to a single digit integer. Return ``-1`` if
this is not possible. This macro does not raise exceptions.
.. c:function:: double Py_UNICODE_TONUMERIC(Py_UNICODE ch)
Return the character *ch* converted to a double. Return ``-1.0`` if this is not
possible. This macro does not raise exceptions.
These APIs can be used to work with surrogates:
.. c:macro:: Py_UNICODE_IS_SURROGATE(ch)
Check if *ch* is a surrogate (``0xD800 <= ch <= 0xDFFF``).
.. c:macro:: Py_UNICODE_IS_HIGH_SURROGATE(ch)
Check if *ch* is a high surrogate (``0xD800 <= ch <= 0xDBFF``).
.. c:macro:: Py_UNICODE_IS_LOW_SURROGATE(ch)
Check if *ch* is a low surrogate (``0xDC00 <= ch <= 0xDFFF``).
.. c:macro:: Py_UNICODE_JOIN_SURROGATES(high, low)
Join two surrogate characters and return a single Py_UCS4 value.
*high* and *low* are respectively the leading and trailing surrogates in a
surrogate pair.
Creating and accessing Unicode strings
""""""""""""""""""""""""""""""""""""""
To create Unicode objects and access their basic sequence properties, use these
APIs:
.. c:function:: PyObject* PyUnicode_New(Py_ssize_t size, Py_UCS4 maxchar)
Create a new Unicode object. *maxchar* should be the true maximum code point
to be placed in the string. As an approximation, it can be rounded up to the
nearest value in the sequence 127, 255, 65535, 1114111.
This is the recommended way to allocate a new Unicode object. Objects
created using this function are not resizable.
.. versionadded:: 3.3
.. c:function:: PyObject* PyUnicode_FromKindAndData(int kind, const void *buffer, \
Py_ssize_t size)
Create a new Unicode object with the given *kind* (possible values are
:c:macro:`PyUnicode_1BYTE_KIND` etc., as returned by
:c:func:`PyUnicode_KIND`). The *buffer* must point to an array of *size*
units of 1, 2 or 4 bytes per character, as given by the kind.
.. versionadded:: 3.3
.. c:function:: PyObject* PyUnicode_FromStringAndSize(const char *u, Py_ssize_t size)
Create a Unicode object from the char buffer *u*. The bytes will be
interpreted as being UTF-8 encoded. The buffer is copied into the new
object. If the buffer is not ``NULL``, the return value might be a shared
object, i.e. modification of the data is not allowed.
If *u* is ``NULL``, this function behaves like :c:func:`PyUnicode_FromUnicode`
with the buffer set to ``NULL``. This usage is deprecated in favor of
:c:func:`PyUnicode_New`.
.. c:function:: PyObject *PyUnicode_FromString(const char *u)
Create a Unicode object from a UTF-8 encoded null-terminated char buffer
*u*.
.. c:function:: PyObject* PyUnicode_FromFormat(const char *format, ...)
Take a C :c:func:`printf`\ -style *format* string and a variable number of
arguments, calculate the size of the resulting Python Unicode string and return
a string with the values formatted into it. The variable arguments must be C
types and must correspond exactly to the format characters in the *format*
ASCII-encoded string. The following format characters are allowed:
.. % This should be exactly the same as the table in PyErr_Format.
.. % The descriptions for %zd and %zu are wrong, but the truth is complicated
.. % because not all compilers support the %z width modifier -- we fake it
.. % when necessary via interpolating PY_FORMAT_SIZE_T.
.. % Similar comments apply to the %ll width modifier and
.. tabularcolumns:: |l|l|L|
+-------------------+---------------------+----------------------------------+
| Format Characters | Type | Comment |
+===================+=====================+==================================+
| :attr:`%%` | *n/a* | The literal % character. |
+-------------------+---------------------+----------------------------------+
| :attr:`%c` | int | A single character, |
| | | represented as a C int. |
+-------------------+---------------------+----------------------------------+
| :attr:`%d` | int | Equivalent to |
| | | ``printf("%d")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%u` | unsigned int | Equivalent to |
| | | ``printf("%u")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%ld` | long | Equivalent to |
| | | ``printf("%ld")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%li` | long | Equivalent to |
| | | ``printf("%li")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%lu` | unsigned long | Equivalent to |
| | | ``printf("%lu")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%lld` | long long | Equivalent to |
| | | ``printf("%lld")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%lli` | long long | Equivalent to |
| | | ``printf("%lli")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%llu` | unsigned long long | Equivalent to |
| | | ``printf("%llu")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%zd` | Py_ssize_t | Equivalent to |
| | | ``printf("%zd")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%zi` | Py_ssize_t | Equivalent to |
| | | ``printf("%zi")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%zu` | size_t | Equivalent to |
| | | ``printf("%zu")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%i` | int | Equivalent to |
| | | ``printf("%i")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%x` | int | Equivalent to |
| | | ``printf("%x")``. [1]_ |
+-------------------+---------------------+----------------------------------+
| :attr:`%s` | const char\* | A null-terminated C character |
| | | array. |
+-------------------+---------------------+----------------------------------+
| :attr:`%p` | const void\* | The hex representation of a C |
| | | pointer. Mostly equivalent to |
| | | ``printf("%p")`` except that |
| | | it is guaranteed to start with |
| | | the literal ``0x`` regardless |
| | | of what the platform's |
| | | ``printf`` yields. |
+-------------------+---------------------+----------------------------------+
| :attr:`%A` | PyObject\* | The result of calling |
| | | :func:`ascii`. |
+-------------------+---------------------+----------------------------------+
| :attr:`%U` | PyObject\* | A Unicode object. |
+-------------------+---------------------+----------------------------------+
| :attr:`%V` | PyObject\*, | A Unicode object (which may be |
| | const char\* | ``NULL``) and a null-terminated |
| | | C character array as a second |
| | | parameter (which will be used, |
| | | if the first parameter is |
| | | ``NULL``). |
+-------------------+---------------------+----------------------------------+
| :attr:`%S` | PyObject\* | The result of calling |
| | | :c:func:`PyObject_Str`. |
+-------------------+---------------------+----------------------------------+
| :attr:`%R` | PyObject\* | The result of calling |
| | | :c:func:`PyObject_Repr`. |
+-------------------+---------------------+----------------------------------+
An unrecognized format character causes all the rest of the format string to be
copied as-is to the result string, and any extra arguments discarded.
.. note::
The width formatter unit is number of characters rather than bytes.
The precision formatter unit is number of bytes for ``"%s"`` and
``"%V"`` (if the ``PyObject*`` argument is ``NULL``), and a number of
characters for ``"%A"``, ``"%U"``, ``"%S"``, ``"%R"`` and ``"%V"``
(if the ``PyObject*`` argument is not ``NULL``).
.. [1] For integer specifiers (d, u, ld, li, lu, lld, lli, llu, zd, zi,
zu, i, x): the 0-conversion flag has effect even when a precision is given.
.. versionchanged:: 3.2
Support for ``"%lld"`` and ``"%llu"`` added.
.. versionchanged:: 3.3
Support for ``"%li"``, ``"%lli"`` and ``"%zi"`` added.
.. versionchanged:: 3.4
Support width and precision formatter for ``"%s"``, ``"%A"``, ``"%U"``,
``"%V"``, ``"%S"``, ``"%R"`` added.
.. c:function:: PyObject* PyUnicode_FromFormatV(const char *format, va_list vargs)
Identical to :c:func:`PyUnicode_FromFormat` except that it takes exactly two
arguments.
.. c:function:: PyObject* PyUnicode_FromEncodedObject(PyObject *obj, \
const char *encoding, const char *errors)
Decode an encoded object *obj* to a Unicode object.
:class:`bytes`, :class:`bytearray` and other
:term:`bytes-like objects <bytes-like object>`
are decoded according to the given *encoding* and using the error handling
defined by *errors*. Both can be ``NULL`` to have the interface use the default
values (see :ref:`builtincodecs` for details).
All other objects, including Unicode objects, cause a :exc:`TypeError` to be
set.
The API returns ``NULL`` if there was an error. The caller is responsible for
decref'ing the returned objects.
.. c:function:: Py_ssize_t PyUnicode_GetLength(PyObject *unicode)
Return the length of the Unicode object, in code points.
.. versionadded:: 3.3
.. c:function:: Py_ssize_t PyUnicode_CopyCharacters(PyObject *to, \
Py_ssize_t to_start, \
PyObject *from, \
Py_ssize_t from_start, \
Py_ssize_t how_many)
Copy characters from one Unicode object into another. This function performs
character conversion when necessary and falls back to :c:func:`memcpy` if
possible. Returns ``-1`` and sets an exception on error, otherwise returns
the number of copied characters.
.. versionadded:: 3.3
.. c:function:: Py_ssize_t PyUnicode_Fill(PyObject *unicode, Py_ssize_t start, \
Py_ssize_t length, Py_UCS4 fill_char)
Fill a string with a character: write *fill_char* into
``unicode[start:start+length]``.
Fail if *fill_char* is bigger than the string maximum character, or if the
string has more than 1 reference.
Return the number of written character, or return ``-1`` and raise an
exception on error.
.. versionadded:: 3.3
.. c:function:: int PyUnicode_WriteChar(PyObject *unicode, Py_ssize_t index, \
Py_UCS4 character)
Write a character to a string. The string must have been created through
:c:func:`PyUnicode_New`. Since Unicode strings are supposed to be immutable,
the string must not be shared, or have been hashed yet.
This function checks that *unicode* is a Unicode object, that the index is
not out of bounds, and that the object can be modified safely (i.e. that it
its reference count is one).
.. versionadded:: 3.3
.. c:function:: Py_UCS4 PyUnicode_ReadChar(PyObject *unicode, Py_ssize_t index)
Read a character from a string. This function checks that *unicode* is a
Unicode object and the index is not out of bounds, in contrast to the macro
version :c:func:`PyUnicode_READ_CHAR`.
.. versionadded:: 3.3
.. c:function:: PyObject* PyUnicode_Substring(PyObject *str, Py_ssize_t start, \
Py_ssize_t end)
Return a substring of *str*, from character index *start* (included) to
character index *end* (excluded). Negative indices are not supported.
.. versionadded:: 3.3
.. c:function:: Py_UCS4* PyUnicode_AsUCS4(PyObject *u, Py_UCS4 *buffer, \
Py_ssize_t buflen, int copy_null)
Copy the string *u* into a UCS4 buffer, including a null character, if
*copy_null* is set. Returns ``NULL`` and sets an exception on error (in
particular, a :exc:`SystemError` if *buflen* is smaller than the length of
*u*). *buffer* is returned on success.
.. versionadded:: 3.3
.. c:function:: Py_UCS4* PyUnicode_AsUCS4Copy(PyObject *u)
Copy the string *u* into a new UCS4 buffer that is allocated using
:c:func:`PyMem_Malloc`. If this fails, ``NULL`` is returned with a
:exc:`MemoryError` set. The returned buffer always has an extra
null code point appended.
.. versionadded:: 3.3
Deprecated Py_UNICODE APIs
""""""""""""""""""""""""""
.. deprecated-removed:: 3.3 4.0
These API functions are deprecated with the implementation of :pep:`393`.
Extension modules can continue using them, as they will not be removed in Python
3.x, but need to be aware that their use can now cause performance and memory hits.
.. c:function:: PyObject* PyUnicode_FromUnicode(const Py_UNICODE *u, Py_ssize_t size)
Create a Unicode object from the Py_UNICODE buffer *u* of the given size. *u*
may be ``NULL`` which causes the contents to be undefined. It is the user's
responsibility to fill in the needed data. The buffer is copied into the new
object.
If the buffer is not ``NULL``, the return value might be a shared object.
Therefore, modification of the resulting Unicode object is only allowed when
*u* is ``NULL``.
If the buffer is ``NULL``, :c:func:`PyUnicode_READY` must be called once the
string content has been filled before using any of the access macros such as
:c:func:`PyUnicode_KIND`.
.. deprecated-removed:: 3.3 3.12
Part of the old-style Unicode API, please migrate to using
:c:func:`PyUnicode_FromKindAndData`, :c:func:`PyUnicode_FromWideChar`, or
:c:func:`PyUnicode_New`.
.. c:function:: Py_UNICODE* PyUnicode_AsUnicode(PyObject *unicode)
Return a read-only pointer to the Unicode object's internal
:c:type:`Py_UNICODE` buffer, or ``NULL`` on error. This will create the
:c:type:`Py_UNICODE*` representation of the object if it is not yet
available. The buffer is always terminated with an extra null code point.
Note that the resulting :c:type:`Py_UNICODE` string may also contain
embedded null code points, which would cause the string to be truncated when
used in most C functions.
.. deprecated-removed:: 3.3 3.12
Part of the old-style Unicode API, please migrate to using
:c:func:`PyUnicode_AsUCS4`, :c:func:`PyUnicode_AsWideChar`,
:c:func:`PyUnicode_ReadChar` or similar new APIs.
.. deprecated-removed:: 3.3 3.10
.. c:function:: PyObject* PyUnicode_TransformDecimalToASCII(Py_UNICODE *s, Py_ssize_t size)
Create a Unicode object by replacing all decimal digits in
:c:type:`Py_UNICODE` buffer of the given *size* by ASCII digits 0--9
according to their decimal value. Return ``NULL`` if an exception occurs.
.. c:function:: Py_UNICODE* PyUnicode_AsUnicodeAndSize(PyObject *unicode, Py_ssize_t *size)
Like :c:func:`PyUnicode_AsUnicode`, but also saves the :c:func:`Py_UNICODE`
array length (excluding the extra null terminator) in *size*.
Note that the resulting :c:type:`Py_UNICODE*` string
may contain embedded null code points, which would cause the string to be
truncated when used in most C functions.
.. versionadded:: 3.3
.. deprecated-removed:: 3.3 3.12
Part of the old-style Unicode API, please migrate to using
:c:func:`PyUnicode_AsUCS4`, :c:func:`PyUnicode_AsWideChar`,
:c:func:`PyUnicode_ReadChar` or similar new APIs.
.. c:function:: Py_UNICODE* PyUnicode_AsUnicodeCopy(PyObject *unicode)
Create a copy of a Unicode string ending with a null code point. Return ``NULL``
and raise a :exc:`MemoryError` exception on memory allocation failure,
otherwise return a new allocated buffer (use :c:func:`PyMem_Free` to free
the buffer). Note that the resulting :c:type:`Py_UNICODE*` string may
contain embedded null code points, which would cause the string to be
truncated when used in most C functions.
.. versionadded:: 3.2
Please migrate to using :c:func:`PyUnicode_AsUCS4Copy` or similar new APIs.
.. c:function:: Py_ssize_t PyUnicode_GetSize(PyObject *unicode)
Return the size of the deprecated :c:type:`Py_UNICODE` representation, in
code units (this includes surrogate pairs as 2 units).
.. deprecated-removed:: 3.3 3.12
Part of the old-style Unicode API, please migrate to using
:c:func:`PyUnicode_GET_LENGTH`.
.. c:function:: PyObject* PyUnicode_FromObject(PyObject *obj)
Copy an instance of a Unicode subtype to a new true Unicode object if
necessary. If *obj* is already a true Unicode object (not a subtype),
return the reference with incremented refcount.
Objects other than Unicode or its subtypes will cause a :exc:`TypeError`.
Locale Encoding
"""""""""""""""
The current locale encoding can be used to decode text from the operating
system.
.. c:function:: PyObject* PyUnicode_DecodeLocaleAndSize(const char *str, \
Py_ssize_t len, \
const char *errors)
Decode a string from UTF-8 on Android and VxWorks, or from the current
locale encoding on other platforms. The supported
error handlers are ``"strict"`` and ``"surrogateescape"``
(:pep:`383`). The decoder uses ``"strict"`` error handler if
*errors* is ``NULL``. *str* must end with a null character but
cannot contain embedded null characters.
Use :c:func:`PyUnicode_DecodeFSDefaultAndSize` to decode a string from
:c:data:`Py_FileSystemDefaultEncoding` (the locale encoding read at
Python startup).
This function ignores the Python UTF-8 mode.
.. seealso::
The :c:func:`Py_DecodeLocale` function.
.. versionadded:: 3.3
.. versionchanged:: 3.7
The function now also uses the current locale encoding for the
``surrogateescape`` error handler, except on Android. Previously, :c:func:`Py_DecodeLocale`
was used for the ``surrogateescape``, and the current locale encoding was
used for ``strict``.
.. c:function:: PyObject* PyUnicode_DecodeLocale(const char *str, const char *errors)
Similar to :c:func:`PyUnicode_DecodeLocaleAndSize`, but compute the string
length using :c:func:`strlen`.
.. versionadded:: 3.3
.. c:function:: PyObject* PyUnicode_EncodeLocale(PyObject *unicode, const char *errors)
Encode a Unicode object to UTF-8 on Android and VxWorks, or to the current
locale encoding on other platforms. The
supported error handlers are ``"strict"`` and ``"surrogateescape"``
(:pep:`383`). The encoder uses ``"strict"`` error handler if
*errors* is ``NULL``. Return a :class:`bytes` object. *unicode* cannot
contain embedded null characters.
Use :c:func:`PyUnicode_EncodeFSDefault` to encode a string to
:c:data:`Py_FileSystemDefaultEncoding` (the locale encoding read at
Python startup).
This function ignores the Python UTF-8 mode.
.. seealso::
The :c:func:`Py_EncodeLocale` function.
.. versionadded:: 3.3
.. versionchanged:: 3.7
The function now also uses the current locale encoding for the
``surrogateescape`` error handler, except on Android. Previously,
:c:func:`Py_EncodeLocale`
was used for the ``surrogateescape``, and the current locale encoding was
used for ``strict``.
File System Encoding
""""""""""""""""""""
To encode and decode file names and other environment strings,
:c:data:`Py_FileSystemDefaultEncoding` should be used as the encoding, and
:c:data:`Py_FileSystemDefaultEncodeErrors` should be used as the error handler
(:pep:`383` and :pep:`529`). To encode file names to :class:`bytes` during
argument parsing, the ``"O&"`` converter should be used, passing
:c:func:`PyUnicode_FSConverter` as the conversion function:
.. c:function:: int PyUnicode_FSConverter(PyObject* obj, void* result)
ParseTuple converter: encode :class:`str` objects -- obtained directly or
through the :class:`os.PathLike` interface -- to :class:`bytes` using
:c:func:`PyUnicode_EncodeFSDefault`; :class:`bytes` objects are output as-is.
*result* must be a :c:type:`PyBytesObject*` which must be released when it is
no longer used.
.. versionadded:: 3.1
.. versionchanged:: 3.6
Accepts a :term:`path-like object`.
To decode file names to :class:`str` during argument parsing, the ``"O&"``
converter should be used, passing :c:func:`PyUnicode_FSDecoder` as the
conversion function:
.. c:function:: int PyUnicode_FSDecoder(PyObject* obj, void* result)
ParseTuple converter: decode :class:`bytes` objects -- obtained either
directly or indirectly through the :class:`os.PathLike` interface -- to
:class:`str` using :c:func:`PyUnicode_DecodeFSDefaultAndSize`; :class:`str`
objects are output as-is. *result* must be a :c:type:`PyUnicodeObject*` which
must be released when it is no longer used.
.. versionadded:: 3.2
.. versionchanged:: 3.6
Accepts a :term:`path-like object`.
.. c:function:: PyObject* PyUnicode_DecodeFSDefaultAndSize(const char *s, Py_ssize_t size)
Decode a string using :c:data:`Py_FileSystemDefaultEncoding` and the
:c:data:`Py_FileSystemDefaultEncodeErrors` error handler.
If :c:data:`Py_FileSystemDefaultEncoding` is not set, fall back to the
locale encoding.
:c:data:`Py_FileSystemDefaultEncoding` is initialized at startup from the
locale encoding and cannot be modified later. If you need to decode a string
from the current locale encoding, use
:c:func:`PyUnicode_DecodeLocaleAndSize`.
.. seealso::
The :c:func:`Py_DecodeLocale` function.
.. versionchanged:: 3.6
Use :c:data:`Py_FileSystemDefaultEncodeErrors` error handler.
.. c:function:: PyObject* PyUnicode_DecodeFSDefault(const char *s)
Decode a null-terminated string using :c:data:`Py_FileSystemDefaultEncoding`
and the :c:data:`Py_FileSystemDefaultEncodeErrors` error handler.
If :c:data:`Py_FileSystemDefaultEncoding` is not set, fall back to the
locale encoding.
Use :c:func:`PyUnicode_DecodeFSDefaultAndSize` if you know the string length.
.. versionchanged:: 3.6
Use :c:data:`Py_FileSystemDefaultEncodeErrors` error handler.
.. c:function:: PyObject* PyUnicode_EncodeFSDefault(PyObject *unicode)
Encode a Unicode object to :c:data:`Py_FileSystemDefaultEncoding` with the
:c:data:`Py_FileSystemDefaultEncodeErrors` error handler, and return
:class:`bytes`. Note that the resulting :class:`bytes` object may contain
null bytes.
If :c:data:`Py_FileSystemDefaultEncoding` is not set, fall back to the
locale encoding.
:c:data:`Py_FileSystemDefaultEncoding` is initialized at startup from the
locale encoding and cannot be modified later. If you need to encode a string
to the current locale encoding, use :c:func:`PyUnicode_EncodeLocale`.
.. seealso::
The :c:func:`Py_EncodeLocale` function.
.. versionadded:: 3.2
.. versionchanged:: 3.6
Use :c:data:`Py_FileSystemDefaultEncodeErrors` error handler.
wchar_t Support
"""""""""""""""
:c:type:`wchar_t` support for platforms which support it:
.. c:function:: PyObject* PyUnicode_FromWideChar(const wchar_t *w, Py_ssize_t size)
Create a Unicode object from the :c:type:`wchar_t` buffer *w* of the given *size*.
Passing ``-1`` as the *size* indicates that the function must itself compute the length,
using wcslen.
Return ``NULL`` on failure.
.. c:function:: Py_ssize_t PyUnicode_AsWideChar(PyObject *unicode, wchar_t *w, Py_ssize_t size)
Copy the Unicode object contents into the :c:type:`wchar_t` buffer *w*. At most
*size* :c:type:`wchar_t` characters are copied (excluding a possibly trailing
null termination character). Return the number of :c:type:`wchar_t` characters
copied or ``-1`` in case of an error. Note that the resulting :c:type:`wchar_t*`
string may or may not be null-terminated. It is the responsibility of the caller
to make sure that the :c:type:`wchar_t*` string is null-terminated in case this is
required by the application. Also, note that the :c:type:`wchar_t*` string
might contain null characters, which would cause the string to be truncated
when used with most C functions.
.. c:function:: wchar_t* PyUnicode_AsWideCharString(PyObject *unicode, Py_ssize_t *size)
Convert the Unicode object to a wide character string. The output string
always ends with a null character. If *size* is not ``NULL``, write the number
of wide characters (excluding the trailing null termination character) into
*\*size*. Note that the resulting :c:type:`wchar_t` string might contain
null characters, which would cause the string to be truncated when used with
most C functions. If *size* is ``NULL`` and the :c:type:`wchar_t*` string
contains null characters a :exc:`ValueError` is raised.
Returns a buffer allocated by :c:func:`PyMem_Alloc` (use
:c:func:`PyMem_Free` to free it) on success. On error, returns ``NULL``
and *\*size* is undefined. Raises a :exc:`MemoryError` if memory allocation
is failed.
.. versionadded:: 3.2
.. versionchanged:: 3.7
Raises a :exc:`ValueError` if *size* is ``NULL`` and the :c:type:`wchar_t*`
string contains null characters.
.. _builtincodecs:
Built-in Codecs
^^^^^^^^^^^^^^^
Python provides a set of built-in codecs which are written in C for speed. All of
these codecs are directly usable via the following functions.
Many of the following APIs take two arguments encoding and errors, and they
have the same semantics as the ones of the built-in :func:`str` string object
constructor.
Setting encoding to ``NULL`` causes the default encoding to be used
which is UTF-8. The file system calls should use
:c:func:`PyUnicode_FSConverter` for encoding file names. This uses the
variable :c:data:`Py_FileSystemDefaultEncoding` internally. This
variable should be treated as read-only: on some systems, it will be a
pointer to a static string, on others, it will change at run-time
(such as when the application invokes setlocale).
Error handling is set by errors which may also be set to ``NULL`` meaning to use
the default handling defined for the codec. Default error handling for all
built-in codecs is "strict" (:exc:`ValueError` is raised).
The codecs all use a similar interface. Only deviation from the following
generic ones are documented for simplicity.
Generic Codecs
""""""""""""""
These are the generic codec APIs:
.. c:function:: PyObject* PyUnicode_Decode(const char *s, Py_ssize_t size, \
const char *encoding, const char *errors)
Create a Unicode object by decoding *size* bytes of the encoded string *s*.
*encoding* and *errors* have the same meaning as the parameters of the same name
in the :func:`str` built-in function. The codec to be used is looked up
using the Python codec registry. Return ``NULL`` if an exception was raised by
the codec.
.. c:function:: PyObject* PyUnicode_AsEncodedString(PyObject *unicode, \
const char *encoding, const char *errors)
Encode a Unicode object and return the result as Python bytes object.
*encoding* and *errors* have the same meaning as the parameters of the same
name in the Unicode :meth:`~str.encode` method. The codec to be used is looked up
using the Python codec registry. Return ``NULL`` if an exception was raised by
the codec.
.. c:function:: PyObject* PyUnicode_Encode(const Py_UNICODE *s, Py_ssize_t size, \
const char *encoding, const char *errors)
Encode the :c:type:`Py_UNICODE` buffer *s* of the given *size* and return a Python
bytes object. *encoding* and *errors* have the same meaning as the
parameters of the same name in the Unicode :meth:`~str.encode` method. The codec
to be used is looked up using the Python codec registry. Return ``NULL`` if an
exception was raised by the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsEncodedString`.
UTF-8 Codecs
""""""""""""
These are the UTF-8 codec APIs:
.. c:function:: PyObject* PyUnicode_DecodeUTF8(const char *s, Py_ssize_t size, const char *errors)
Create a Unicode object by decoding *size* bytes of the UTF-8 encoded string
*s*. Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_DecodeUTF8Stateful(const char *s, Py_ssize_t size, \
const char *errors, Py_ssize_t *consumed)
If *consumed* is ``NULL``, behave like :c:func:`PyUnicode_DecodeUTF8`. If
*consumed* is not ``NULL``, trailing incomplete UTF-8 byte sequences will not be
treated as an error. Those bytes will not be decoded and the number of bytes
that have been decoded will be stored in *consumed*.
.. c:function:: PyObject* PyUnicode_AsUTF8String(PyObject *unicode)
Encode a Unicode object using UTF-8 and return the result as Python bytes
object. Error handling is "strict". Return ``NULL`` if an exception was
raised by the codec.
.. c:function:: const char* PyUnicode_AsUTF8AndSize(PyObject *unicode, Py_ssize_t *size)
Return a pointer to the UTF-8 encoding of the Unicode object, and
store the size of the encoded representation (in bytes) in *size*. The
*size* argument can be ``NULL``; in this case no size will be stored. The
returned buffer always has an extra null byte appended (not included in
*size*), regardless of whether there are any other null code points.
In the case of an error, ``NULL`` is returned with an exception set and no
*size* is stored.
This caches the UTF-8 representation of the string in the Unicode object, and
subsequent calls will return a pointer to the same buffer. The caller is not
responsible for deallocating the buffer.
.. versionadded:: 3.3
.. versionchanged:: 3.7
The return type is now ``const char *`` rather of ``char *``.
.. c:function:: const char* PyUnicode_AsUTF8(PyObject *unicode)
As :c:func:`PyUnicode_AsUTF8AndSize`, but does not store the size.
.. versionadded:: 3.3
.. versionchanged:: 3.7
The return type is now ``const char *`` rather of ``char *``.
.. c:function:: PyObject* PyUnicode_EncodeUTF8(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
Encode the :c:type:`Py_UNICODE` buffer *s* of the given *size* using UTF-8 and
return a Python bytes object. Return ``NULL`` if an exception was raised by
the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsUTF8String`, :c:func:`PyUnicode_AsUTF8AndSize` or
:c:func:`PyUnicode_AsEncodedString`.
UTF-32 Codecs
"""""""""""""
These are the UTF-32 codec APIs:
.. c:function:: PyObject* PyUnicode_DecodeUTF32(const char *s, Py_ssize_t size, \
const char *errors, int *byteorder)
Decode *size* bytes from a UTF-32 encoded buffer string and return the
corresponding Unicode object. *errors* (if non-``NULL``) defines the error
handling. It defaults to "strict".
If *byteorder* is non-``NULL``, the decoder starts decoding using the given byte
order::
*byteorder == -1: little endian
*byteorder == 0: native order
*byteorder == 1: big endian
If ``*byteorder`` is zero, and the first four bytes of the input data are a
byte order mark (BOM), the decoder switches to this byte order and the BOM is
not copied into the resulting Unicode string. If ``*byteorder`` is ``-1`` or
``1``, any byte order mark is copied to the output.
After completion, *\*byteorder* is set to the current byte order at the end
of input data.
If *byteorder* is ``NULL``, the codec starts in native order mode.
Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_DecodeUTF32Stateful(const char *s, Py_ssize_t size, \
const char *errors, int *byteorder, Py_ssize_t *consumed)
If *consumed* is ``NULL``, behave like :c:func:`PyUnicode_DecodeUTF32`. If
*consumed* is not ``NULL``, :c:func:`PyUnicode_DecodeUTF32Stateful` will not treat
trailing incomplete UTF-32 byte sequences (such as a number of bytes not divisible
by four) as an error. Those bytes will not be decoded and the number of bytes
that have been decoded will be stored in *consumed*.
.. c:function:: PyObject* PyUnicode_AsUTF32String(PyObject *unicode)
Return a Python byte string using the UTF-32 encoding in native byte
order. The string always starts with a BOM mark. Error handling is "strict".
Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_EncodeUTF32(const Py_UNICODE *s, Py_ssize_t size, \
const char *errors, int byteorder)
Return a Python bytes object holding the UTF-32 encoded value of the Unicode
data in *s*. Output is written according to the following byte order::
byteorder == -1: little endian
byteorder == 0: native byte order (writes a BOM mark)
byteorder == 1: big endian
If byteorder is ``0``, the output string will always start with the Unicode BOM
mark (U+FEFF). In the other two modes, no BOM mark is prepended.
If ``Py_UNICODE_WIDE`` is not defined, surrogate pairs will be output
as a single code point.
Return ``NULL`` if an exception was raised by the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsUTF32String` or :c:func:`PyUnicode_AsEncodedString`.
UTF-16 Codecs
"""""""""""""
These are the UTF-16 codec APIs:
.. c:function:: PyObject* PyUnicode_DecodeUTF16(const char *s, Py_ssize_t size, \
const char *errors, int *byteorder)
Decode *size* bytes from a UTF-16 encoded buffer string and return the
corresponding Unicode object. *errors* (if non-``NULL``) defines the error
handling. It defaults to "strict".
If *byteorder* is non-``NULL``, the decoder starts decoding using the given byte
order::
*byteorder == -1: little endian
*byteorder == 0: native order
*byteorder == 1: big endian
If ``*byteorder`` is zero, and the first two bytes of the input data are a
byte order mark (BOM), the decoder switches to this byte order and the BOM is
not copied into the resulting Unicode string. If ``*byteorder`` is ``-1`` or
``1``, any byte order mark is copied to the output (where it will result in
either a ``\ufeff`` or a ``\ufffe`` character).
After completion, *\*byteorder* is set to the current byte order at the end
of input data.
If *byteorder* is ``NULL``, the codec starts in native order mode.
Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_DecodeUTF16Stateful(const char *s, Py_ssize_t size, \
const char *errors, int *byteorder, Py_ssize_t *consumed)
If *consumed* is ``NULL``, behave like :c:func:`PyUnicode_DecodeUTF16`. If
*consumed* is not ``NULL``, :c:func:`PyUnicode_DecodeUTF16Stateful` will not treat
trailing incomplete UTF-16 byte sequences (such as an odd number of bytes or a
split surrogate pair) as an error. Those bytes will not be decoded and the
number of bytes that have been decoded will be stored in *consumed*.
.. c:function:: PyObject* PyUnicode_AsUTF16String(PyObject *unicode)
Return a Python byte string using the UTF-16 encoding in native byte
order. The string always starts with a BOM mark. Error handling is "strict".
Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_EncodeUTF16(const Py_UNICODE *s, Py_ssize_t size, \
const char *errors, int byteorder)
Return a Python bytes object holding the UTF-16 encoded value of the Unicode
data in *s*. Output is written according to the following byte order::
byteorder == -1: little endian
byteorder == 0: native byte order (writes a BOM mark)
byteorder == 1: big endian
If byteorder is ``0``, the output string will always start with the Unicode BOM
mark (U+FEFF). In the other two modes, no BOM mark is prepended.
If ``Py_UNICODE_WIDE`` is defined, a single :c:type:`Py_UNICODE` value may get
represented as a surrogate pair. If it is not defined, each :c:type:`Py_UNICODE`
values is interpreted as a UCS-2 character.
Return ``NULL`` if an exception was raised by the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsUTF16String` or :c:func:`PyUnicode_AsEncodedString`.
UTF-7 Codecs
""""""""""""
These are the UTF-7 codec APIs:
.. c:function:: PyObject* PyUnicode_DecodeUTF7(const char *s, Py_ssize_t size, const char *errors)
Create a Unicode object by decoding *size* bytes of the UTF-7 encoded string
*s*. Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_DecodeUTF7Stateful(const char *s, Py_ssize_t size, \
const char *errors, Py_ssize_t *consumed)
If *consumed* is ``NULL``, behave like :c:func:`PyUnicode_DecodeUTF7`. If
*consumed* is not ``NULL``, trailing incomplete UTF-7 base-64 sections will not
be treated as an error. Those bytes will not be decoded and the number of
bytes that have been decoded will be stored in *consumed*.
.. c:function:: PyObject* PyUnicode_EncodeUTF7(const Py_UNICODE *s, Py_ssize_t size, \
int base64SetO, int base64WhiteSpace, const char *errors)
Encode the :c:type:`Py_UNICODE` buffer of the given size using UTF-7 and
return a Python bytes object. Return ``NULL`` if an exception was raised by
the codec.
If *base64SetO* is nonzero, "Set O" (punctuation that has no otherwise
special meaning) will be encoded in base-64. If *base64WhiteSpace* is
nonzero, whitespace will be encoded in base-64. Both are set to zero for the
Python "utf-7" codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsEncodedString`.
Unicode-Escape Codecs
"""""""""""""""""""""
These are the "Unicode Escape" codec APIs:
.. c:function:: PyObject* PyUnicode_DecodeUnicodeEscape(const char *s, \
Py_ssize_t size, const char *errors)
Create a Unicode object by decoding *size* bytes of the Unicode-Escape encoded
string *s*. Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_AsUnicodeEscapeString(PyObject *unicode)
Encode a Unicode object using Unicode-Escape and return the result as a
bytes object. Error handling is "strict". Return ``NULL`` if an exception was
raised by the codec.
.. c:function:: PyObject* PyUnicode_EncodeUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size)
Encode the :c:type:`Py_UNICODE` buffer of the given *size* using Unicode-Escape and
return a bytes object. Return ``NULL`` if an exception was raised by the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsUnicodeEscapeString`.
Raw-Unicode-Escape Codecs
"""""""""""""""""""""""""
These are the "Raw Unicode Escape" codec APIs:
.. c:function:: PyObject* PyUnicode_DecodeRawUnicodeEscape(const char *s, \
Py_ssize_t size, const char *errors)
Create a Unicode object by decoding *size* bytes of the Raw-Unicode-Escape
encoded string *s*. Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_AsRawUnicodeEscapeString(PyObject *unicode)
Encode a Unicode object using Raw-Unicode-Escape and return the result as
a bytes object. Error handling is "strict". Return ``NULL`` if an exception
was raised by the codec.
.. c:function:: PyObject* PyUnicode_EncodeRawUnicodeEscape(const Py_UNICODE *s, \
Py_ssize_t size)
Encode the :c:type:`Py_UNICODE` buffer of the given *size* using Raw-Unicode-Escape
and return a bytes object. Return ``NULL`` if an exception was raised by the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsRawUnicodeEscapeString` or
:c:func:`PyUnicode_AsEncodedString`.
Latin-1 Codecs
""""""""""""""
These are the Latin-1 codec APIs: Latin-1 corresponds to the first 256 Unicode
ordinals and only these are accepted by the codecs during encoding.
.. c:function:: PyObject* PyUnicode_DecodeLatin1(const char *s, Py_ssize_t size, const char *errors)
Create a Unicode object by decoding *size* bytes of the Latin-1 encoded string
*s*. Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_AsLatin1String(PyObject *unicode)
Encode a Unicode object using Latin-1 and return the result as Python bytes
object. Error handling is "strict". Return ``NULL`` if an exception was
raised by the codec.
.. c:function:: PyObject* PyUnicode_EncodeLatin1(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
Encode the :c:type:`Py_UNICODE` buffer of the given *size* using Latin-1 and
return a Python bytes object. Return ``NULL`` if an exception was raised by
the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsLatin1String` or
:c:func:`PyUnicode_AsEncodedString`.
ASCII Codecs
""""""""""""
These are the ASCII codec APIs. Only 7-bit ASCII data is accepted. All other
codes generate errors.
.. c:function:: PyObject* PyUnicode_DecodeASCII(const char *s, Py_ssize_t size, const char *errors)
Create a Unicode object by decoding *size* bytes of the ASCII encoded string
*s*. Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_AsASCIIString(PyObject *unicode)
Encode a Unicode object using ASCII and return the result as Python bytes
object. Error handling is "strict". Return ``NULL`` if an exception was
raised by the codec.
.. c:function:: PyObject* PyUnicode_EncodeASCII(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
Encode the :c:type:`Py_UNICODE` buffer of the given *size* using ASCII and
return a Python bytes object. Return ``NULL`` if an exception was raised by
the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsASCIIString` or
:c:func:`PyUnicode_AsEncodedString`.
Character Map Codecs
""""""""""""""""""""
This codec is special in that it can be used to implement many different codecs
(and this is in fact what was done to obtain most of the standard codecs
included in the :mod:`encodings` package). The codec uses mapping to encode and
decode characters. The mapping objects provided must support the
:meth:`__getitem__` mapping interface; dictionaries and sequences work well.
These are the mapping codec APIs:
.. c:function:: PyObject* PyUnicode_DecodeCharmap(const char *data, Py_ssize_t size, \
PyObject *mapping, const char *errors)
Create a Unicode object by decoding *size* bytes of the encoded string *s*
using the given *mapping* object. Return ``NULL`` if an exception was raised
by the codec.
If *mapping* is ``NULL``, Latin-1 decoding will be applied. Else
*mapping* must map bytes ordinals (integers in the range from 0 to 255)
to Unicode strings, integers (which are then interpreted as Unicode
ordinals) or ``None``. Unmapped data bytes -- ones which cause a
:exc:`LookupError`, as well as ones which get mapped to ``None``,
``0xFFFE`` or ``'\ufffe'``, are treated as undefined mappings and cause
an error.
.. c:function:: PyObject* PyUnicode_AsCharmapString(PyObject *unicode, PyObject *mapping)
Encode a Unicode object using the given *mapping* object and return the
result as a bytes object. Error handling is "strict". Return ``NULL`` if an
exception was raised by the codec.
The *mapping* object must map Unicode ordinal integers to bytes objects,
integers in the range from 0 to 255 or ``None``. Unmapped character
ordinals (ones which cause a :exc:`LookupError`) as well as mapped to
``None`` are treated as "undefined mapping" and cause an error.
.. c:function:: PyObject* PyUnicode_EncodeCharmap(const Py_UNICODE *s, Py_ssize_t size, \
PyObject *mapping, const char *errors)
Encode the :c:type:`Py_UNICODE` buffer of the given *size* using the given
*mapping* object and return the result as a bytes object. Return ``NULL`` if
an exception was raised by the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsCharmapString` or
:c:func:`PyUnicode_AsEncodedString`.
The following codec API is special in that maps Unicode to Unicode.
.. c:function:: PyObject* PyUnicode_Translate(PyObject *str, PyObject *table, const char *errors)
Translate a string by applying a character mapping table to it and return the
resulting Unicode object. Return ``NULL`` if an exception was raised by the
codec.
The mapping table must map Unicode ordinal integers to Unicode ordinal integers
or ``None`` (causing deletion of the character).
Mapping tables need only provide the :meth:`__getitem__` interface; dictionaries
and sequences work well. Unmapped character ordinals (ones which cause a
:exc:`LookupError`) are left untouched and are copied as-is.
*errors* has the usual meaning for codecs. It may be ``NULL`` which indicates to
use the default error handling.
.. c:function:: PyObject* PyUnicode_TranslateCharmap(const Py_UNICODE *s, Py_ssize_t size, \
PyObject *mapping, const char *errors)
Translate a :c:type:`Py_UNICODE` buffer of the given *size* by applying a
character *mapping* table to it and return the resulting Unicode object.
Return ``NULL`` when an exception was raised by the codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_Translate`. or :ref:`generic codec based API
<codec-registry>`
MBCS codecs for Windows
"""""""""""""""""""""""
These are the MBCS codec APIs. They are currently only available on Windows and
use the Win32 MBCS converters to implement the conversions. Note that MBCS (or
DBCS) is a class of encodings, not just one. The target encoding is defined by
the user settings on the machine running the codec.
.. c:function:: PyObject* PyUnicode_DecodeMBCS(const char *s, Py_ssize_t size, const char *errors)
Create a Unicode object by decoding *size* bytes of the MBCS encoded string *s*.
Return ``NULL`` if an exception was raised by the codec.
.. c:function:: PyObject* PyUnicode_DecodeMBCSStateful(const char *s, Py_ssize_t size, \
const char *errors, Py_ssize_t *consumed)
If *consumed* is ``NULL``, behave like :c:func:`PyUnicode_DecodeMBCS`. If
*consumed* is not ``NULL``, :c:func:`PyUnicode_DecodeMBCSStateful` will not decode
trailing lead byte and the number of bytes that have been decoded will be stored
in *consumed*.
.. c:function:: PyObject* PyUnicode_AsMBCSString(PyObject *unicode)
Encode a Unicode object using MBCS and return the result as Python bytes
object. Error handling is "strict". Return ``NULL`` if an exception was
raised by the codec.
.. c:function:: PyObject* PyUnicode_EncodeCodePage(int code_page, PyObject *unicode, const char *errors)
Encode the Unicode object using the specified code page and return a Python
bytes object. Return ``NULL`` if an exception was raised by the codec. Use
:c:data:`CP_ACP` code page to get the MBCS encoder.
.. versionadded:: 3.3
.. c:function:: PyObject* PyUnicode_EncodeMBCS(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
Encode the :c:type:`Py_UNICODE` buffer of the given *size* using MBCS and return
a Python bytes object. Return ``NULL`` if an exception was raised by the
codec.
.. deprecated-removed:: 3.3 4.0
Part of the old-style :c:type:`Py_UNICODE` API; please migrate to using
:c:func:`PyUnicode_AsMBCSString`, :c:func:`PyUnicode_EncodeCodePage` or
:c:func:`PyUnicode_AsEncodedString`.
Methods & Slots
"""""""""""""""
.. _unicodemethodsandslots:
Methods and Slot Functions
^^^^^^^^^^^^^^^^^^^^^^^^^^
The following APIs are capable of handling Unicode objects and strings on input
(we refer to them as strings in the descriptions) and return Unicode objects or
integers as appropriate.
They all return ``NULL`` or ``-1`` if an exception occurs.
.. c:function:: PyObject* PyUnicode_Concat(PyObject *left, PyObject *right)
Concat two strings giving a new Unicode string.
.. c:function:: PyObject* PyUnicode_Split(PyObject *s, PyObject *sep, Py_ssize_t maxsplit)
Split a string giving a list of Unicode strings. If *sep* is ``NULL``, splitting
will be done at all whitespace substrings. Otherwise, splits occur at the given
separator. At most *maxsplit* splits will be done. If negative, no limit is
set. Separators are not included in the resulting list.
.. c:function:: PyObject* PyUnicode_Splitlines(PyObject *s, int keepend)
Split a Unicode string at line breaks, returning a list of Unicode strings.
CRLF is considered to be one line break. If *keepend* is ``0``, the Line break
characters are not included in the resulting strings.
.. c:function:: PyObject* PyUnicode_Join(PyObject *separator, PyObject *seq)
Join a sequence of strings using the given *separator* and return the resulting
Unicode string.
.. c:function:: Py_ssize_t PyUnicode_Tailmatch(PyObject *str, PyObject *substr, \
Py_ssize_t start, Py_ssize_t end, int direction)
Return ``1`` if *substr* matches ``str[start:end]`` at the given tail end
(*direction* == ``-1`` means to do a prefix match, *direction* == ``1`` a suffix match),
``0`` otherwise. Return ``-1`` if an error occurred.
.. c:function:: Py_ssize_t PyUnicode_Find(PyObject *str, PyObject *substr, \
Py_ssize_t start, Py_ssize_t end, int direction)
Return the first position of *substr* in ``str[start:end]`` using the given
*direction* (*direction* == ``1`` means to do a forward search, *direction* == ``-1`` a
backward search). The return value is the index of the first match; a value of
``-1`` indicates that no match was found, and ``-2`` indicates that an error
occurred and an exception has been set.
.. c:function:: Py_ssize_t PyUnicode_FindChar(PyObject *str, Py_UCS4 ch, \
Py_ssize_t start, Py_ssize_t end, int direction)
Return the first position of the character *ch* in ``str[start:end]`` using
the given *direction* (*direction* == ``1`` means to do a forward search,
*direction* == ``-1`` a backward search). The return value is the index of the
first match; a value of ``-1`` indicates that no match was found, and ``-2``
indicates that an error occurred and an exception has been set.
.. versionadded:: 3.3
.. versionchanged:: 3.7
*start* and *end* are now adjusted to behave like ``str[start:end]``.
.. c:function:: Py_ssize_t PyUnicode_Count(PyObject *str, PyObject *substr, \
Py_ssize_t start, Py_ssize_t end)
Return the number of non-overlapping occurrences of *substr* in
``str[start:end]``. Return ``-1`` if an error occurred.
.. c:function:: PyObject* PyUnicode_Replace(PyObject *str, PyObject *substr, \
PyObject *replstr, Py_ssize_t maxcount)
Replace at most *maxcount* occurrences of *substr* in *str* with *replstr* and
return the resulting Unicode object. *maxcount* == ``-1`` means replace all
occurrences.
.. c:function:: int PyUnicode_Compare(PyObject *left, PyObject *right)
Compare two strings and return ``-1``, ``0``, ``1`` for less than, equal, and greater than,
respectively.
This function returns ``-1`` upon failure, so one should call
:c:func:`PyErr_Occurred` to check for errors.
.. c:function:: int PyUnicode_CompareWithASCIIString(PyObject *uni, const char *string)
Compare a Unicode object, *uni*, with *string* and return ``-1``, ``0``, ``1`` for less
than, equal, and greater than, respectively. It is best to pass only
ASCII-encoded strings, but the function interprets the input string as
ISO-8859-1 if it contains non-ASCII characters.
This function does not raise exceptions.
.. c:function:: PyObject* PyUnicode_RichCompare(PyObject *left, PyObject *right, int op)
Rich compare two Unicode strings and return one of the following:
* ``NULL`` in case an exception was raised
* :const:`Py_True` or :const:`Py_False` for successful comparisons
* :const:`Py_NotImplemented` in case the type combination is unknown
Possible values for *op* are :const:`Py_GT`, :const:`Py_GE`, :const:`Py_EQ`,
:const:`Py_NE`, :const:`Py_LT`, and :const:`Py_LE`.
.. c:function:: PyObject* PyUnicode_Format(PyObject *format, PyObject *args)
Return a new string object from *format* and *args*; this is analogous to
``format % args``.
.. c:function:: int PyUnicode_Contains(PyObject *container, PyObject *element)
Check whether *element* is contained in *container* and return true or false
accordingly.
*element* has to coerce to a one element Unicode string. ``-1`` is returned
if there was an error.
.. c:function:: void PyUnicode_InternInPlace(PyObject **string)
Intern the argument *\*string* in place. The argument must be the address of a
pointer variable pointing to a Python Unicode string object. If there is an
existing interned string that is the same as *\*string*, it sets *\*string* to
it (decrementing the reference count of the old string object and incrementing
the reference count of the interned string object), otherwise it leaves
*\*string* alone and interns it (incrementing its reference count).
(Clarification: even though there is a lot of talk about reference counts, think
of this function as reference-count-neutral; you own the object after the call
if and only if you owned it before the call.)
.. c:function:: PyObject* PyUnicode_InternFromString(const char *v)
A combination of :c:func:`PyUnicode_FromString` and
:c:func:`PyUnicode_InternInPlace`, returning either a new Unicode string
object that has been interned, or a new ("owned") reference to an earlier
interned string object with the same value.