| /* SHA3 module | |
| * | |
| * This module provides an interface to the SHA3 algorithm | |
| * | |
| * See below for information about the original code this module was | |
| * based upon. Additional work performed by: | |
| * | |
| * Andrew Kuchling (amk@amk.ca) | |
| * Greg Stein (gstein@lyra.org) | |
| * Trevor Perrin (trevp@trevp.net) | |
| * Gregory P. Smith (greg@krypto.org) | |
| * | |
| * Copyright (C) 2012-2016 Christian Heimes (christian@python.org) | |
| * Licensed to PSF under a Contributor Agreement. | |
| * | |
| */ | |
| #include "Python.h" | |
| #include "pystrhex.h" | |
| #include "../hashlib.h" | |
| /* ************************************************************************** | |
| * SHA-3 (Keccak) and SHAKE | |
| * | |
| * The code is based on KeccakCodePackage from 2016-04-23 | |
| * commit 647f93079afc4ada3d23737477a6e52511ca41fd | |
| * | |
| * The reference implementation is altered in this points: | |
| * - C++ comments are converted to ANSI C comments. | |
| * - all function names are mangled | |
| * - typedef for UINT64 is commented out. | |
| * - brg_endian.h is removed | |
| * | |
| * *************************************************************************/ | |
| #ifdef __sparc | |
| /* opt64 uses un-aligned memory access that causes a BUS error with msg | |
| * 'invalid address alignment' on SPARC. */ | |
| #define KeccakOpt 32 | |
| #elif PY_BIG_ENDIAN | |
| /* opt64 is not yet supported on big endian platforms */ | |
| #define KeccakOpt 32 | |
| #elif SIZEOF_VOID_P == 8 && defined(PY_UINT64_T) | |
| /* opt64 works only on little-endian 64bit platforms with unsigned int64 */ | |
| #define KeccakOpt 64 | |
| #else | |
| /* opt32 is used for the remaining 32 and 64bit platforms */ | |
| #define KeccakOpt 32 | |
| #endif | |
| #if KeccakOpt == 64 && defined(PY_UINT64_T) | |
| /* 64bit platforms with unsigned int64 */ | |
| typedef PY_UINT64_T UINT64; | |
| typedef unsigned char UINT8; | |
| #endif | |
| /* replacement for brg_endian.h */ | |
| #define IS_LITTLE_ENDIAN 1234 | |
| #define IS_BIG_ENDIAN 4321 | |
| #if PY_LITTLE_ENDIAN | |
| #define PLATFORM_BYTE_ORDER IS_LITTLE_ENDIAN | |
| #endif | |
| #if PY_BIG_ENDIAN | |
| #define PLATFORM_BYTE_ORDER IS_BIG_ENDIAN | |
| #endif | |
| /* mangle names */ | |
| #define KeccakF1600_FastLoop_Absorb _PySHA3_KeccakF1600_FastLoop_Absorb | |
| #define Keccak_HashFinal _PySHA3_Keccak_HashFinal | |
| #define Keccak_HashInitialize _PySHA3_Keccak_HashInitialize | |
| #define Keccak_HashSqueeze _PySHA3_Keccak_HashSqueeze | |
| #define Keccak_HashUpdate _PySHA3_Keccak_HashUpdate | |
| #define KeccakP1600_AddBytes _PySHA3_KeccakP1600_AddBytes | |
| #define KeccakP1600_AddBytesInLane _PySHA3_KeccakP1600_AddBytesInLane | |
| #define KeccakP1600_AddLanes _PySHA3_KeccakP1600_AddLanes | |
| #define KeccakP1600_ExtractAndAddBytes _PySHA3_KeccakP1600_ExtractAndAddBytes | |
| #define KeccakP1600_ExtractAndAddBytesInLane _PySHA3_KeccakP1600_ExtractAndAddBytesInLane | |
| #define KeccakP1600_ExtractAndAddLanes _PySHA3_KeccakP1600_ExtractAndAddLanes | |
| #define KeccakP1600_ExtractBytes _PySHA3_KeccakP1600_ExtractBytes | |
| #define KeccakP1600_ExtractBytesInLane _PySHA3_KeccakP1600_ExtractBytesInLane | |
| #define KeccakP1600_ExtractLanes _PySHA3_KeccakP1600_ExtractLanes | |
| #define KeccakP1600_Initialize _PySHA3_KeccakP1600_Initialize | |
| #define KeccakP1600_OverwriteBytes _PySHA3_KeccakP1600_OverwriteBytes | |
| #define KeccakP1600_OverwriteBytesInLane _PySHA3_KeccakP1600_OverwriteBytesInLane | |
| #define KeccakP1600_OverwriteLanes _PySHA3_KeccakP1600_OverwriteLanes | |
| #define KeccakP1600_OverwriteWithZeroes _PySHA3_KeccakP1600_OverwriteWithZeroes | |
| #define KeccakP1600_Permute_12rounds _PySHA3_KeccakP1600_Permute_12rounds | |
| #define KeccakP1600_Permute_24rounds _PySHA3_KeccakP1600_Permute_24rounds | |
| #define KeccakWidth1600_Sponge _PySHA3_KeccakWidth1600_Sponge | |
| #define KeccakWidth1600_SpongeAbsorb _PySHA3_KeccakWidth1600_SpongeAbsorb | |
| #define KeccakWidth1600_SpongeAbsorbLastFewBits _PySHA3_KeccakWidth1600_SpongeAbsorbLastFewBits | |
| #define KeccakWidth1600_SpongeInitialize _PySHA3_KeccakWidth1600_SpongeInitialize | |
| #define KeccakWidth1600_SpongeSqueeze _PySHA3_KeccakWidth1600_SpongeSqueeze | |
| #if KeccakOpt == 32 | |
| #define KeccakP1600_AddByte _PySHA3_KeccakP1600_AddByte | |
| #define KeccakP1600_Permute_Nrounds _PySHA3_KeccakP1600_Permute_Nrounds | |
| #define KeccakP1600_SetBytesInLaneToZero _PySHA3_KeccakP1600_SetBytesInLaneToZero | |
| #endif | |
| /* we are only interested in KeccakP1600 */ | |
| #define KeccakP200_excluded 1 | |
| #define KeccakP400_excluded 1 | |
| #define KeccakP800_excluded 1 | |
| /* inline all Keccak dependencies */ | |
| #include "kcp/KeccakHash.h" | |
| #include "kcp/KeccakSponge.h" | |
| #include "kcp/KeccakHash.c" | |
| #include "kcp/KeccakSponge.c" | |
| #if KeccakOpt == 64 | |
| #include "kcp/KeccakP-1600-opt64.c" | |
| #elif KeccakOpt == 32 | |
| #include "kcp/KeccakP-1600-inplace32BI.c" | |
| #endif | |
| #define SHA3_MAX_DIGESTSIZE 64 /* 64 Bytes (512 Bits) for 224 to 512 */ | |
| #define SHA3_LANESIZE (20 * 8) /* ExtractLane needs max uint64_t[20] extra. */ | |
| #define SHA3_state Keccak_HashInstance | |
| #define SHA3_init Keccak_HashInitialize | |
| #define SHA3_process Keccak_HashUpdate | |
| #define SHA3_done Keccak_HashFinal | |
| #define SHA3_squeeze Keccak_HashSqueeze | |
| #define SHA3_copystate(dest, src) memcpy(&(dest), &(src), sizeof(SHA3_state)) | |
| /*[clinic input] | |
| module _sha3 | |
| class _sha3.sha3_224 "SHA3object *" "&SHA3_224typ" | |
| class _sha3.sha3_256 "SHA3object *" "&SHA3_256typ" | |
| class _sha3.sha3_384 "SHA3object *" "&SHA3_384typ" | |
| class _sha3.sha3_512 "SHA3object *" "&SHA3_512typ" | |
| class _sha3.shake_128 "SHA3object *" "&SHAKE128type" | |
| class _sha3.shake_256 "SHA3object *" "&SHAKE256type" | |
| [clinic start generated code]*/ | |
| /*[clinic end generated code: output=da39a3ee5e6b4b0d input=b8a53680f370285a]*/ | |
| /* The structure for storing SHA3 info */ | |
| typedef struct { | |
| PyObject_HEAD | |
| SHA3_state hash_state; | |
| PyThread_type_lock lock; | |
| } SHA3object; | |
| static PyTypeObject SHA3_224type; | |
| static PyTypeObject SHA3_256type; | |
| static PyTypeObject SHA3_384type; | |
| static PyTypeObject SHA3_512type; | |
| #ifdef PY_WITH_KECCAK | |
| static PyTypeObject Keccak_224type; | |
| static PyTypeObject Keccak_256type; | |
| static PyTypeObject Keccak_384type; | |
| static PyTypeObject Keccak_512type; | |
| #endif | |
| static PyTypeObject SHAKE128type; | |
| static PyTypeObject SHAKE256type; | |
| #include "clinic/sha3module.c.h" | |
| static SHA3object * | |
| newSHA3object(PyTypeObject *type) | |
| { | |
| SHA3object *newobj; | |
| newobj = (SHA3object *)PyObject_New(SHA3object, type); | |
| if (newobj == NULL) { | |
| return NULL; | |
| } | |
| newobj->lock = NULL; | |
| return newobj; | |
| } | |
| static PyObject * | |
| py_sha3_new(PyTypeObject *type, PyObject *args, PyObject *kwargs) | |
| { | |
| SHA3object *self = NULL; | |
| Py_buffer buf = {NULL, NULL}; | |
| HashReturn res; | |
| PyObject *data = NULL; | |
| if (!_PyArg_NoKeywords(_PyType_Name(type), kwargs)) { | |
| return NULL; | |
| } | |
| if (!PyArg_UnpackTuple(args, _PyType_Name(type), 0, 1, &data)) { | |
| return NULL; | |
| } | |
| self = newSHA3object(type); | |
| if (self == NULL) { | |
| goto error; | |
| } | |
| if (type == &SHA3_224type) { | |
| res = Keccak_HashInitialize_SHA3_224(&self->hash_state); | |
| } else if (type == &SHA3_256type) { | |
| res = Keccak_HashInitialize_SHA3_256(&self->hash_state); | |
| } else if (type == &SHA3_384type) { | |
| res = Keccak_HashInitialize_SHA3_384(&self->hash_state); | |
| } else if (type == &SHA3_512type) { | |
| res = Keccak_HashInitialize_SHA3_512(&self->hash_state); | |
| #ifdef PY_WITH_KECCAK | |
| } else if (type == &Keccak_224type) { | |
| res = Keccak_HashInitialize(&self->hash_state, 1152, 448, 224, 0x01); | |
| } else if (type == &Keccak_256type) { | |
| res = Keccak_HashInitialize(&self->hash_state, 1088, 512, 256, 0x01); | |
| } else if (type == &Keccak_384type) { | |
| res = Keccak_HashInitialize(&self->hash_state, 832, 768, 384, 0x01); | |
| } else if (type == &Keccak_512type) { | |
| res = Keccak_HashInitialize(&self->hash_state, 576, 1024, 512, 0x01); | |
| #endif | |
| } else if (type == &SHAKE128type) { | |
| res = Keccak_HashInitialize_SHAKE128(&self->hash_state); | |
| } else if (type == &SHAKE256type) { | |
| res = Keccak_HashInitialize_SHAKE256(&self->hash_state); | |
| } else { | |
| PyErr_BadInternalCall(); | |
| goto error; | |
| } | |
| if (data) { | |
| GET_BUFFER_VIEW_OR_ERROR(data, &buf, goto error); | |
| if (buf.len >= HASHLIB_GIL_MINSIZE) { | |
| /* invariant: New objects can't be accessed by other code yet, | |
| * thus it's safe to release the GIL without locking the object. | |
| */ | |
| Py_BEGIN_ALLOW_THREADS | |
| res = SHA3_process(&self->hash_state, buf.buf, buf.len * 8); | |
| Py_END_ALLOW_THREADS | |
| } | |
| else { | |
| res = SHA3_process(&self->hash_state, buf.buf, buf.len * 8); | |
| } | |
| if (res != SUCCESS) { | |
| PyErr_SetString(PyExc_RuntimeError, | |
| "internal error in SHA3 Update()"); | |
| goto error; | |
| } | |
| PyBuffer_Release(&buf); | |
| } | |
| return (PyObject *)self; | |
| error: | |
| if (self) { | |
| Py_DECREF(self); | |
| } | |
| if (data && buf.obj) { | |
| PyBuffer_Release(&buf); | |
| } | |
| return NULL; | |
| } | |
| /* Internal methods for a hash object */ | |
| static void | |
| SHA3_dealloc(SHA3object *self) | |
| { | |
| if (self->lock) { | |
| PyThread_free_lock(self->lock); | |
| } | |
| PyObject_Del(self); | |
| } | |
| /* External methods for a hash object */ | |
| /*[clinic input] | |
| _sha3.sha3_224.copy | |
| Return a copy of the hash object. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _sha3_sha3_224_copy_impl(SHA3object *self) | |
| /*[clinic end generated code: output=6c537411ecdcda4c input=93a44aaebea51ba8]*/ | |
| { | |
| SHA3object *newobj; | |
| if ((newobj = newSHA3object(Py_TYPE(self))) == NULL) { | |
| return NULL; | |
| } | |
| ENTER_HASHLIB(self); | |
| SHA3_copystate(newobj->hash_state, self->hash_state); | |
| LEAVE_HASHLIB(self); | |
| return (PyObject *)newobj; | |
| } | |
| /*[clinic input] | |
| _sha3.sha3_224.digest | |
| Return the digest value as a bytes object. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _sha3_sha3_224_digest_impl(SHA3object *self) | |
| /*[clinic end generated code: output=fd531842e20b2d5b input=5b2a659536bbd248]*/ | |
| { | |
| unsigned char digest[SHA3_MAX_DIGESTSIZE + SHA3_LANESIZE]; | |
| SHA3_state temp; | |
| HashReturn res; | |
| ENTER_HASHLIB(self); | |
| SHA3_copystate(temp, self->hash_state); | |
| LEAVE_HASHLIB(self); | |
| res = SHA3_done(&temp, digest); | |
| if (res != SUCCESS) { | |
| PyErr_SetString(PyExc_RuntimeError, "internal error in SHA3 Final()"); | |
| return NULL; | |
| } | |
| return PyBytes_FromStringAndSize((const char *)digest, | |
| self->hash_state.fixedOutputLength / 8); | |
| } | |
| /*[clinic input] | |
| _sha3.sha3_224.hexdigest | |
| Return the digest value as a string of hexadecimal digits. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _sha3_sha3_224_hexdigest_impl(SHA3object *self) | |
| /*[clinic end generated code: output=75ad03257906918d input=2d91bb6e0d114ee3]*/ | |
| { | |
| unsigned char digest[SHA3_MAX_DIGESTSIZE + SHA3_LANESIZE]; | |
| SHA3_state temp; | |
| HashReturn res; | |
| /* Get the raw (binary) digest value */ | |
| ENTER_HASHLIB(self); | |
| SHA3_copystate(temp, self->hash_state); | |
| LEAVE_HASHLIB(self); | |
| res = SHA3_done(&temp, digest); | |
| if (res != SUCCESS) { | |
| PyErr_SetString(PyExc_RuntimeError, "internal error in SHA3 Final()"); | |
| return NULL; | |
| } | |
| return _Py_strhex((const char *)digest, | |
| self->hash_state.fixedOutputLength / 8); | |
| } | |
| /*[clinic input] | |
| _sha3.sha3_224.update | |
| data: object | |
| / | |
| Update this hash object's state with the provided bytes-like object. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _sha3_sha3_224_update(SHA3object *self, PyObject *data) | |
| /*[clinic end generated code: output=d3223352286ed357 input=a887f54dcc4ae227]*/ | |
| { | |
| Py_buffer buf; | |
| HashReturn res; | |
| GET_BUFFER_VIEW_OR_ERROUT(data, &buf); | |
| /* add new data, the function takes the length in bits not bytes */ | |
| if (self->lock == NULL && buf.len >= HASHLIB_GIL_MINSIZE) { | |
| self->lock = PyThread_allocate_lock(); | |
| } | |
| /* Once a lock exists all code paths must be synchronized. We have to | |
| * release the GIL even for small buffers as acquiring the lock may take | |
| * an unlimited amount of time when another thread updates this object | |
| * with lots of data. */ | |
| if (self->lock) { | |
| Py_BEGIN_ALLOW_THREADS | |
| PyThread_acquire_lock(self->lock, 1); | |
| res = SHA3_process(&self->hash_state, buf.buf, buf.len * 8); | |
| PyThread_release_lock(self->lock); | |
| Py_END_ALLOW_THREADS | |
| } | |
| else { | |
| res = SHA3_process(&self->hash_state, buf.buf, buf.len * 8); | |
| } | |
| if (res != SUCCESS) { | |
| PyBuffer_Release(&buf); | |
| PyErr_SetString(PyExc_RuntimeError, | |
| "internal error in SHA3 Update()"); | |
| return NULL; | |
| } | |
| PyBuffer_Release(&buf); | |
| Py_RETURN_NONE; | |
| } | |
| static PyMethodDef SHA3_methods[] = { | |
| _SHA3_SHA3_224_COPY_METHODDEF | |
| _SHA3_SHA3_224_DIGEST_METHODDEF | |
| _SHA3_SHA3_224_HEXDIGEST_METHODDEF | |
| _SHA3_SHA3_224_UPDATE_METHODDEF | |
| {NULL, NULL} /* sentinel */ | |
| }; | |
| static PyObject * | |
| SHA3_get_block_size(SHA3object *self, void *closure) | |
| { | |
| int rate = self->hash_state.sponge.rate; | |
| return PyLong_FromLong(rate / 8); | |
| } | |
| static PyObject * | |
| SHA3_get_name(SHA3object *self, void *closure) | |
| { | |
| PyTypeObject *type = Py_TYPE(self); | |
| if (type == &SHA3_224type) { | |
| return PyUnicode_FromString("sha3_224"); | |
| } else if (type == &SHA3_256type) { | |
| return PyUnicode_FromString("sha3_256"); | |
| } else if (type == &SHA3_384type) { | |
| return PyUnicode_FromString("sha3_384"); | |
| } else if (type == &SHA3_512type) { | |
| return PyUnicode_FromString("sha3_512"); | |
| #ifdef PY_WITH_KECCAK | |
| } else if (type == &Keccak_224type) { | |
| return PyUnicode_FromString("keccak_224"); | |
| } else if (type == &Keccak_256type) { | |
| return PyUnicode_FromString("keccak_256"); | |
| } else if (type == &Keccak_384type) { | |
| return PyUnicode_FromString("keccak_384"); | |
| } else if (type == &Keccak_512type) { | |
| return PyUnicode_FromString("keccak_512"); | |
| #endif | |
| } else if (type == &SHAKE128type) { | |
| return PyUnicode_FromString("shake_128"); | |
| } else if (type == &SHAKE256type) { | |
| return PyUnicode_FromString("shake_256"); | |
| } else { | |
| PyErr_BadInternalCall(); | |
| return NULL; | |
| } | |
| } | |
| static PyObject * | |
| SHA3_get_digest_size(SHA3object *self, void *closure) | |
| { | |
| return PyLong_FromLong(self->hash_state.fixedOutputLength / 8); | |
| } | |
| static PyObject * | |
| SHA3_get_capacity_bits(SHA3object *self, void *closure) | |
| { | |
| int capacity = 1600 - self->hash_state.sponge.rate; | |
| return PyLong_FromLong(capacity); | |
| } | |
| static PyObject * | |
| SHA3_get_rate_bits(SHA3object *self, void *closure) | |
| { | |
| unsigned int rate = self->hash_state.sponge.rate; | |
| return PyLong_FromLong(rate); | |
| } | |
| static PyObject * | |
| SHA3_get_suffix(SHA3object *self, void *closure) | |
| { | |
| unsigned char suffix[2]; | |
| suffix[0] = self->hash_state.delimitedSuffix; | |
| suffix[1] = 0; | |
| return PyBytes_FromStringAndSize((const char *)suffix, 1); | |
| } | |
| static PyGetSetDef SHA3_getseters[] = { | |
| {"block_size", (getter)SHA3_get_block_size, NULL, NULL, NULL}, | |
| {"name", (getter)SHA3_get_name, NULL, NULL, NULL}, | |
| {"digest_size", (getter)SHA3_get_digest_size, NULL, NULL, NULL}, | |
| {"_capacity_bits", (getter)SHA3_get_capacity_bits, NULL, NULL, NULL}, | |
| {"_rate_bits", (getter)SHA3_get_rate_bits, NULL, NULL, NULL}, | |
| {"_suffix", (getter)SHA3_get_suffix, NULL, NULL, NULL}, | |
| {NULL} /* Sentinel */ | |
| }; | |
| #define SHA3_TYPE(type_obj, type_name, type_doc, type_methods) \ | |
| static PyTypeObject type_obj = { \ | |
| PyVarObject_HEAD_INIT(NULL, 0) \ | |
| type_name, /* tp_name */ \ | |
| sizeof(SHA3object), /* tp_basicsize */ \ | |
| 0, /* tp_itemsize */ \ | |
| /* methods */ \ | |
| (destructor)SHA3_dealloc, /* tp_dealloc */ \ | |
| 0, /* tp_print */ \ | |
| 0, /* tp_getattr */ \ | |
| 0, /* tp_setattr */ \ | |
| 0, /* tp_reserved */ \ | |
| 0, /* tp_repr */ \ | |
| 0, /* tp_as_number */ \ | |
| 0, /* tp_as_sequence */ \ | |
| 0, /* tp_as_mapping */ \ | |
| 0, /* tp_hash */ \ | |
| 0, /* tp_call */ \ | |
| 0, /* tp_str */ \ | |
| 0, /* tp_getattro */ \ | |
| 0, /* tp_setattro */ \ | |
| 0, /* tp_as_buffer */ \ | |
| Py_TPFLAGS_DEFAULT, /* tp_flags */ \ | |
| type_doc, /* tp_doc */ \ | |
| 0, /* tp_traverse */ \ | |
| 0, /* tp_clear */ \ | |
| 0, /* tp_richcompare */ \ | |
| 0, /* tp_weaklistoffset */ \ | |
| 0, /* tp_iter */ \ | |
| 0, /* tp_iternext */ \ | |
| type_methods, /* tp_methods */ \ | |
| NULL, /* tp_members */ \ | |
| SHA3_getseters, /* tp_getset */ \ | |
| 0, /* tp_base */ \ | |
| 0, /* tp_dict */ \ | |
| 0, /* tp_descr_get */ \ | |
| 0, /* tp_descr_set */ \ | |
| 0, /* tp_dictoffset */ \ | |
| 0, /* tp_init */ \ | |
| 0, /* tp_alloc */ \ | |
| py_sha3_new, /* tp_new */ \ | |
| } | |
| PyDoc_STRVAR(sha3_224__doc__, | |
| "sha3_224([data]) -> SHA3 object\n\ | |
| \n\ | |
| Return a new SHA3 hash object with a hashbit length of 28 bytes."); | |
| PyDoc_STRVAR(sha3_256__doc__, | |
| "sha3_256([data]) -> SHA3 object\n\ | |
| \n\ | |
| Return a new SHA3 hash object with a hashbit length of 32 bytes."); | |
| PyDoc_STRVAR(sha3_384__doc__, | |
| "sha3_384([data]) -> SHA3 object\n\ | |
| \n\ | |
| Return a new SHA3 hash object with a hashbit length of 48 bytes."); | |
| PyDoc_STRVAR(sha3_512__doc__, | |
| "sha3_512([data]) -> SHA3 object\n\ | |
| \n\ | |
| Return a new SHA3 hash object with a hashbit length of 64 bytes."); | |
| SHA3_TYPE(SHA3_224type, "_sha3.sha3_224", sha3_224__doc__, SHA3_methods); | |
| SHA3_TYPE(SHA3_256type, "_sha3.sha3_256", sha3_256__doc__, SHA3_methods); | |
| SHA3_TYPE(SHA3_384type, "_sha3.sha3_384", sha3_384__doc__, SHA3_methods); | |
| SHA3_TYPE(SHA3_512type, "_sha3.sha3_512", sha3_512__doc__, SHA3_methods); | |
| #ifdef PY_WITH_KECCAK | |
| PyDoc_STRVAR(keccak_224__doc__, | |
| "keccak_224([data]) -> Keccak object\n\ | |
| \n\ | |
| Return a new Keccak hash object with a hashbit length of 28 bytes."); | |
| PyDoc_STRVAR(keccak_256__doc__, | |
| "keccak_256([data]) -> Keccak object\n\ | |
| \n\ | |
| Return a new Keccak hash object with a hashbit length of 32 bytes."); | |
| PyDoc_STRVAR(keccak_384__doc__, | |
| "keccak_384([data]) -> Keccak object\n\ | |
| \n\ | |
| Return a new Keccak hash object with a hashbit length of 48 bytes."); | |
| PyDoc_STRVAR(keccak_512__doc__, | |
| "keccak_512([data]) -> Keccak object\n\ | |
| \n\ | |
| Return a new Keccak hash object with a hashbit length of 64 bytes."); | |
| SHA3_TYPE(Keccak_224type, "_sha3.keccak_224", keccak_224__doc__, SHA3_methods); | |
| SHA3_TYPE(Keccak_256type, "_sha3.keccak_256", keccak_256__doc__, SHA3_methods); | |
| SHA3_TYPE(Keccak_384type, "_sha3.keccak_384", keccak_384__doc__, SHA3_methods); | |
| SHA3_TYPE(Keccak_512type, "_sha3.keccak_512", keccak_512__doc__, SHA3_methods); | |
| #endif | |
| static PyObject * | |
| _SHAKE_digest(SHA3object *self, PyObject *digestlen_obj, int hex) | |
| { | |
| unsigned long digestlen; | |
| unsigned char *digest = NULL; | |
| SHA3_state temp; | |
| int res; | |
| PyObject *result = NULL; | |
| digestlen = PyLong_AsUnsignedLong(digestlen_obj); | |
| if (digestlen == (unsigned long) -1 && PyErr_Occurred()) { | |
| return NULL; | |
| } | |
| if (digestlen >= (1 << 29)) { | |
| PyErr_SetString(PyExc_ValueError, "length is too large"); | |
| return NULL; | |
| } | |
| /* ExtractLane needs at least SHA3_MAX_DIGESTSIZE + SHA3_LANESIZE and | |
| * SHA3_LANESIZE extra space. | |
| */ | |
| digest = (unsigned char*)PyMem_Malloc(digestlen + SHA3_LANESIZE); | |
| if (digest == NULL) { | |
| return PyErr_NoMemory(); | |
| } | |
| /* Get the raw (binary) digest value */ | |
| ENTER_HASHLIB(self); | |
| SHA3_copystate(temp, self->hash_state); | |
| LEAVE_HASHLIB(self); | |
| res = SHA3_done(&temp, NULL); | |
| if (res != SUCCESS) { | |
| PyErr_SetString(PyExc_RuntimeError, "internal error in SHA3 done()"); | |
| goto error; | |
| } | |
| res = SHA3_squeeze(&temp, digest, digestlen * 8); | |
| if (res != SUCCESS) { | |
| PyErr_SetString(PyExc_RuntimeError, "internal error in SHA3 Squeeze()"); | |
| return NULL; | |
| } | |
| if (hex) { | |
| result = _Py_strhex((const char *)digest, digestlen); | |
| } else { | |
| result = PyBytes_FromStringAndSize((const char *)digest, | |
| digestlen); | |
| } | |
| error: | |
| if (digest != NULL) { | |
| PyMem_Free(digest); | |
| } | |
| return result; | |
| } | |
| /*[clinic input] | |
| _sha3.shake_128.digest | |
| length: object | |
| / | |
| Return the digest value as a bytes object. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _sha3_shake_128_digest(SHA3object *self, PyObject *length) | |
| /*[clinic end generated code: output=eaa80b6299142396 input=c579eb109f6227d2]*/ | |
| { | |
| return _SHAKE_digest(self, length, 0); | |
| } | |
| /*[clinic input] | |
| _sha3.shake_128.hexdigest | |
| length: object | |
| / | |
| Return the digest value as a string of hexadecimal digits. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _sha3_shake_128_hexdigest(SHA3object *self, PyObject *length) | |
| /*[clinic end generated code: output=4752f90e53c8bf2a input=a82694ea83865f5a]*/ | |
| { | |
| return _SHAKE_digest(self, length, 1); | |
| } | |
| static PyMethodDef SHAKE_methods[] = { | |
| _SHA3_SHA3_224_COPY_METHODDEF | |
| _SHA3_SHAKE_128_DIGEST_METHODDEF | |
| _SHA3_SHAKE_128_HEXDIGEST_METHODDEF | |
| _SHA3_SHA3_224_UPDATE_METHODDEF | |
| {NULL, NULL} /* sentinel */ | |
| }; | |
| PyDoc_STRVAR(shake_128__doc__, | |
| "shake_128([data]) -> SHAKE object\n\ | |
| \n\ | |
| Return a new SHAKE hash object."); | |
| PyDoc_STRVAR(shake_256__doc__, | |
| "shake_256([data]) -> SHAKE object\n\ | |
| \n\ | |
| Return a new SHAKE hash object."); | |
| SHA3_TYPE(SHAKE128type, "_sha3.shake_128", shake_128__doc__, SHAKE_methods); | |
| SHA3_TYPE(SHAKE256type, "_sha3.shake_256", shake_256__doc__, SHAKE_methods); | |
| /* Initialize this module. */ | |
| static struct PyModuleDef _SHA3module = { | |
| PyModuleDef_HEAD_INIT, | |
| "_sha3", | |
| NULL, | |
| -1, | |
| NULL, | |
| NULL, | |
| NULL, | |
| NULL, | |
| NULL | |
| }; | |
| PyMODINIT_FUNC | |
| PyInit__sha3(void) | |
| { | |
| PyObject *m = NULL; | |
| if ((m = PyModule_Create(&_SHA3module)) == NULL) { | |
| return NULL; | |
| } | |
| #define init_sha3type(name, type) \ | |
| do { \ | |
| Py_TYPE(type) = &PyType_Type; \ | |
| if (PyType_Ready(type) < 0) { \ | |
| goto error; \ | |
| } \ | |
| Py_INCREF((PyObject *)type); \ | |
| if (PyModule_AddObject(m, name, (PyObject *)type) < 0) { \ | |
| goto error; \ | |
| } \ | |
| } while(0) | |
| init_sha3type("sha3_224", &SHA3_224type); | |
| init_sha3type("sha3_256", &SHA3_256type); | |
| init_sha3type("sha3_384", &SHA3_384type); | |
| init_sha3type("sha3_512", &SHA3_512type); | |
| #ifdef PY_WITH_KECCAK | |
| init_sha3type("keccak_224", &Keccak_224type); | |
| init_sha3type("keccak_256", &Keccak_256type); | |
| init_sha3type("keccak_384", &Keccak_384type); | |
| init_sha3type("keccak_512", &Keccak_512type); | |
| #endif | |
| init_sha3type("shake_128", &SHAKE128type); | |
| init_sha3type("shake_256", &SHAKE256type); | |
| #undef init_sha3type | |
| if (PyModule_AddIntConstant(m, "keccakopt", KeccakOpt) < 0) { | |
| goto error; | |
| } | |
| if (PyModule_AddStringConstant(m, "implementation", | |
| KeccakP1600_implementation) < 0) { | |
| goto error; | |
| } | |
| return m; | |
| error: | |
| Py_DECREF(m); | |
| return NULL; | |
| } |