| /* | |
| An implementation of Buffered I/O as defined by PEP 3116 - "New I/O" | |
| Classes defined here: BufferedIOBase, BufferedReader, BufferedWriter, | |
| BufferedRandom. | |
| Written by Amaury Forgeot d'Arc and Antoine Pitrou | |
| */ | |
| #define PY_SSIZE_T_CLEAN | |
| #include "Python.h" | |
| #include "internal/pystate.h" | |
| #include "structmember.h" | |
| #include "pythread.h" | |
| #include "_iomodule.h" | |
| /*[clinic input] | |
| module _io | |
| class _io._BufferedIOBase "PyObject *" "&PyBufferedIOBase_Type" | |
| class _io._Buffered "buffered *" "&PyBufferedIOBase_Type" | |
| class _io.BufferedReader "buffered *" "&PyBufferedReader_Type" | |
| class _io.BufferedWriter "buffered *" "&PyBufferedWriter_Type" | |
| class _io.BufferedRWPair "rwpair *" "&PyBufferedRWPair_Type" | |
| class _io.BufferedRandom "buffered *" "&PyBufferedRandom_Type" | |
| [clinic start generated code]*/ | |
| /*[clinic end generated code: output=da39a3ee5e6b4b0d input=59460b9c5639984d]*/ | |
| _Py_IDENTIFIER(close); | |
| _Py_IDENTIFIER(_dealloc_warn); | |
| _Py_IDENTIFIER(flush); | |
| _Py_IDENTIFIER(isatty); | |
| _Py_IDENTIFIER(mode); | |
| _Py_IDENTIFIER(name); | |
| _Py_IDENTIFIER(peek); | |
| _Py_IDENTIFIER(read); | |
| _Py_IDENTIFIER(read1); | |
| _Py_IDENTIFIER(readable); | |
| _Py_IDENTIFIER(readinto); | |
| _Py_IDENTIFIER(readinto1); | |
| _Py_IDENTIFIER(writable); | |
| _Py_IDENTIFIER(write); | |
| /* | |
| * BufferedIOBase class, inherits from IOBase. | |
| */ | |
| PyDoc_STRVAR(bufferediobase_doc, | |
| "Base class for buffered IO objects.\n" | |
| "\n" | |
| "The main difference with RawIOBase is that the read() method\n" | |
| "supports omitting the size argument, and does not have a default\n" | |
| "implementation that defers to readinto().\n" | |
| "\n" | |
| "In addition, read(), readinto() and write() may raise\n" | |
| "BlockingIOError if the underlying raw stream is in non-blocking\n" | |
| "mode and not ready; unlike their raw counterparts, they will never\n" | |
| "return None.\n" | |
| "\n" | |
| "A typical implementation should not inherit from a RawIOBase\n" | |
| "implementation, but wrap one.\n" | |
| ); | |
| static PyObject * | |
| _bufferediobase_readinto_generic(PyObject *self, Py_buffer *buffer, char readinto1) | |
| { | |
| Py_ssize_t len; | |
| PyObject *data; | |
| data = _PyObject_CallMethodId(self, | |
| readinto1 ? &PyId_read1 : &PyId_read, | |
| "n", buffer->len); | |
| if (data == NULL) | |
| return NULL; | |
| if (!PyBytes_Check(data)) { | |
| Py_DECREF(data); | |
| PyErr_SetString(PyExc_TypeError, "read() should return bytes"); | |
| return NULL; | |
| } | |
| len = PyBytes_GET_SIZE(data); | |
| if (len > buffer->len) { | |
| PyErr_Format(PyExc_ValueError, | |
| "read() returned too much data: " | |
| "%zd bytes requested, %zd returned", | |
| buffer->len, len); | |
| Py_DECREF(data); | |
| return NULL; | |
| } | |
| memcpy(buffer->buf, PyBytes_AS_STRING(data), len); | |
| Py_DECREF(data); | |
| return PyLong_FromSsize_t(len); | |
| } | |
| /*[clinic input] | |
| _io._BufferedIOBase.readinto | |
| buffer: Py_buffer(accept={rwbuffer}) | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__BufferedIOBase_readinto_impl(PyObject *self, Py_buffer *buffer) | |
| /*[clinic end generated code: output=8c8cda6684af8038 input=00a6b9a38f29830a]*/ | |
| { | |
| return _bufferediobase_readinto_generic(self, buffer, 0); | |
| } | |
| /*[clinic input] | |
| _io._BufferedIOBase.readinto1 | |
| buffer: Py_buffer(accept={rwbuffer}) | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__BufferedIOBase_readinto1_impl(PyObject *self, Py_buffer *buffer) | |
| /*[clinic end generated code: output=358623e4fd2b69d3 input=ebad75b4aadfb9be]*/ | |
| { | |
| return _bufferediobase_readinto_generic(self, buffer, 1); | |
| } | |
| static PyObject * | |
| bufferediobase_unsupported(const char *message) | |
| { | |
| _PyIO_State *state = IO_STATE(); | |
| if (state != NULL) | |
| PyErr_SetString(state->unsupported_operation, message); | |
| return NULL; | |
| } | |
| /*[clinic input] | |
| _io._BufferedIOBase.detach | |
| Disconnect this buffer from its underlying raw stream and return it. | |
| After the raw stream has been detached, the buffer is in an unusable | |
| state. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__BufferedIOBase_detach_impl(PyObject *self) | |
| /*[clinic end generated code: output=754977c8d10ed88c input=822427fb58fe4169]*/ | |
| { | |
| return bufferediobase_unsupported("detach"); | |
| } | |
| PyDoc_STRVAR(bufferediobase_read_doc, | |
| "Read and return up to n bytes.\n" | |
| "\n" | |
| "If the argument is omitted, None, or negative, reads and\n" | |
| "returns all data until EOF.\n" | |
| "\n" | |
| "If the argument is positive, and the underlying raw stream is\n" | |
| "not 'interactive', multiple raw reads may be issued to satisfy\n" | |
| "the byte count (unless EOF is reached first). But for\n" | |
| "interactive raw streams (as well as sockets and pipes), at most\n" | |
| "one raw read will be issued, and a short result does not imply\n" | |
| "that EOF is imminent.\n" | |
| "\n" | |
| "Returns an empty bytes object on EOF.\n" | |
| "\n" | |
| "Returns None if the underlying raw stream was open in non-blocking\n" | |
| "mode and no data is available at the moment.\n"); | |
| static PyObject * | |
| bufferediobase_read(PyObject *self, PyObject *args) | |
| { | |
| return bufferediobase_unsupported("read"); | |
| } | |
| PyDoc_STRVAR(bufferediobase_read1_doc, | |
| "Read and return up to n bytes, with at most one read() call\n" | |
| "to the underlying raw stream. A short result does not imply\n" | |
| "that EOF is imminent.\n" | |
| "\n" | |
| "Returns an empty bytes object on EOF.\n"); | |
| static PyObject * | |
| bufferediobase_read1(PyObject *self, PyObject *args) | |
| { | |
| return bufferediobase_unsupported("read1"); | |
| } | |
| PyDoc_STRVAR(bufferediobase_write_doc, | |
| "Write the given buffer to the IO stream.\n" | |
| "\n" | |
| "Returns the number of bytes written, which is always the length of b\n" | |
| "in bytes.\n" | |
| "\n" | |
| "Raises BlockingIOError if the buffer is full and the\n" | |
| "underlying raw stream cannot accept more data at the moment.\n"); | |
| static PyObject * | |
| bufferediobase_write(PyObject *self, PyObject *args) | |
| { | |
| return bufferediobase_unsupported("write"); | |
| } | |
| typedef struct { | |
| PyObject_HEAD | |
| PyObject *raw; | |
| int ok; /* Initialized? */ | |
| int detached; | |
| int readable; | |
| int writable; | |
| char finalizing; | |
| /* True if this is a vanilla Buffered object (rather than a user derived | |
| class) *and* the raw stream is a vanilla FileIO object. */ | |
| int fast_closed_checks; | |
| /* Absolute position inside the raw stream (-1 if unknown). */ | |
| Py_off_t abs_pos; | |
| /* A static buffer of size `buffer_size` */ | |
| char *buffer; | |
| /* Current logical position in the buffer. */ | |
| Py_off_t pos; | |
| /* Position of the raw stream in the buffer. */ | |
| Py_off_t raw_pos; | |
| /* Just after the last buffered byte in the buffer, or -1 if the buffer | |
| isn't ready for reading. */ | |
| Py_off_t read_end; | |
| /* Just after the last byte actually written */ | |
| Py_off_t write_pos; | |
| /* Just after the last byte waiting to be written, or -1 if the buffer | |
| isn't ready for writing. */ | |
| Py_off_t write_end; | |
| PyThread_type_lock lock; | |
| volatile unsigned long owner; | |
| Py_ssize_t buffer_size; | |
| Py_ssize_t buffer_mask; | |
| PyObject *dict; | |
| PyObject *weakreflist; | |
| } buffered; | |
| /* | |
| Implementation notes: | |
| * BufferedReader, BufferedWriter and BufferedRandom try to share most | |
| methods (this is helped by the members `readable` and `writable`, which | |
| are initialized in the respective constructors) | |
| * They also share a single buffer for reading and writing. This enables | |
| interleaved reads and writes without flushing. It also makes the logic | |
| a bit trickier to get right. | |
| * The absolute position of the raw stream is cached, if possible, in the | |
| `abs_pos` member. It must be updated every time an operation is done | |
| on the raw stream. If not sure, it can be reinitialized by calling | |
| _buffered_raw_tell(), which queries the raw stream (_buffered_raw_seek() | |
| also does it). To read it, use RAW_TELL(). | |
| * Three helpers, _bufferedreader_raw_read, _bufferedwriter_raw_write and | |
| _bufferedwriter_flush_unlocked do a lot of useful housekeeping. | |
| NOTE: we should try to maintain block alignment of reads and writes to the | |
| raw stream (according to the buffer size), but for now it is only done | |
| in read() and friends. | |
| */ | |
| /* These macros protect the buffered object against concurrent operations. */ | |
| static int | |
| _enter_buffered_busy(buffered *self) | |
| { | |
| int relax_locking; | |
| PyLockStatus st; | |
| if (self->owner == PyThread_get_thread_ident()) { | |
| PyErr_Format(PyExc_RuntimeError, | |
| "reentrant call inside %R", self); | |
| return 0; | |
| } | |
| relax_locking = _Py_IsFinalizing(); | |
| Py_BEGIN_ALLOW_THREADS | |
| if (!relax_locking) | |
| st = PyThread_acquire_lock(self->lock, 1); | |
| else { | |
| /* When finalizing, we don't want a deadlock to happen with daemon | |
| * threads abruptly shut down while they owned the lock. | |
| * Therefore, only wait for a grace period (1 s.). | |
| * Note that non-daemon threads have already exited here, so this | |
| * shouldn't affect carefully written threaded I/O code. | |
| */ | |
| st = PyThread_acquire_lock_timed(self->lock, (PY_TIMEOUT_T)1e6, 0); | |
| } | |
| Py_END_ALLOW_THREADS | |
| if (relax_locking && st != PY_LOCK_ACQUIRED) { | |
| PyObject *msgobj = PyUnicode_FromFormat( | |
| "could not acquire lock for %A at interpreter " | |
| "shutdown, possibly due to daemon threads", | |
| (PyObject *) self); | |
| const char *msg = PyUnicode_AsUTF8(msgobj); | |
| Py_FatalError(msg); | |
| } | |
| return 1; | |
| } | |
| #define ENTER_BUFFERED(self) \ | |
| ( (PyThread_acquire_lock(self->lock, 0) ? \ | |
| 1 : _enter_buffered_busy(self)) \ | |
| && (self->owner = PyThread_get_thread_ident(), 1) ) | |
| #define LEAVE_BUFFERED(self) \ | |
| do { \ | |
| self->owner = 0; \ | |
| PyThread_release_lock(self->lock); \ | |
| } while(0); | |
| #define CHECK_INITIALIZED(self) \ | |
| if (self->ok <= 0) { \ | |
| if (self->detached) { \ | |
| PyErr_SetString(PyExc_ValueError, \ | |
| "raw stream has been detached"); \ | |
| } else { \ | |
| PyErr_SetString(PyExc_ValueError, \ | |
| "I/O operation on uninitialized object"); \ | |
| } \ | |
| return NULL; \ | |
| } | |
| #define CHECK_INITIALIZED_INT(self) \ | |
| if (self->ok <= 0) { \ | |
| if (self->detached) { \ | |
| PyErr_SetString(PyExc_ValueError, \ | |
| "raw stream has been detached"); \ | |
| } else { \ | |
| PyErr_SetString(PyExc_ValueError, \ | |
| "I/O operation on uninitialized object"); \ | |
| } \ | |
| return -1; \ | |
| } | |
| #define IS_CLOSED(self) \ | |
| (!self->buffer || \ | |
| (self->fast_closed_checks \ | |
| ? _PyFileIO_closed(self->raw) \ | |
| : buffered_closed(self))) | |
| #define CHECK_CLOSED(self, error_msg) \ | |
| if (IS_CLOSED(self)) { \ | |
| PyErr_SetString(PyExc_ValueError, error_msg); \ | |
| return NULL; \ | |
| } | |
| #define VALID_READ_BUFFER(self) \ | |
| (self->readable && self->read_end != -1) | |
| #define VALID_WRITE_BUFFER(self) \ | |
| (self->writable && self->write_end != -1) | |
| #define ADJUST_POSITION(self, _new_pos) \ | |
| do { \ | |
| self->pos = _new_pos; \ | |
| if (VALID_READ_BUFFER(self) && self->read_end < self->pos) \ | |
| self->read_end = self->pos; \ | |
| } while(0) | |
| #define READAHEAD(self) \ | |
| ((self->readable && VALID_READ_BUFFER(self)) \ | |
| ? (self->read_end - self->pos) : 0) | |
| #define RAW_OFFSET(self) \ | |
| (((VALID_READ_BUFFER(self) || VALID_WRITE_BUFFER(self)) \ | |
| && self->raw_pos >= 0) ? self->raw_pos - self->pos : 0) | |
| #define RAW_TELL(self) \ | |
| (self->abs_pos != -1 ? self->abs_pos : _buffered_raw_tell(self)) | |
| #define MINUS_LAST_BLOCK(self, size) \ | |
| (self->buffer_mask ? \ | |
| (size & ~self->buffer_mask) : \ | |
| (self->buffer_size * (size / self->buffer_size))) | |
| static void | |
| buffered_dealloc(buffered *self) | |
| { | |
| self->finalizing = 1; | |
| if (_PyIOBase_finalize((PyObject *) self) < 0) | |
| return; | |
| _PyObject_GC_UNTRACK(self); | |
| self->ok = 0; | |
| if (self->weakreflist != NULL) | |
| PyObject_ClearWeakRefs((PyObject *)self); | |
| Py_CLEAR(self->raw); | |
| if (self->buffer) { | |
| PyMem_Free(self->buffer); | |
| self->buffer = NULL; | |
| } | |
| if (self->lock) { | |
| PyThread_free_lock(self->lock); | |
| self->lock = NULL; | |
| } | |
| Py_CLEAR(self->dict); | |
| Py_TYPE(self)->tp_free((PyObject *)self); | |
| } | |
| static PyObject * | |
| buffered_sizeof(buffered *self, void *unused) | |
| { | |
| Py_ssize_t res; | |
| res = _PyObject_SIZE(Py_TYPE(self)); | |
| if (self->buffer) | |
| res += self->buffer_size; | |
| return PyLong_FromSsize_t(res); | |
| } | |
| static int | |
| buffered_traverse(buffered *self, visitproc visit, void *arg) | |
| { | |
| Py_VISIT(self->raw); | |
| Py_VISIT(self->dict); | |
| return 0; | |
| } | |
| static int | |
| buffered_clear(buffered *self) | |
| { | |
| self->ok = 0; | |
| Py_CLEAR(self->raw); | |
| Py_CLEAR(self->dict); | |
| return 0; | |
| } | |
| /* Because this can call arbitrary code, it shouldn't be called when | |
| the refcount is 0 (that is, not directly from tp_dealloc unless | |
| the refcount has been temporarily re-incremented). */ | |
| static PyObject * | |
| buffered_dealloc_warn(buffered *self, PyObject *source) | |
| { | |
| if (self->ok && self->raw) { | |
| PyObject *r; | |
| r = _PyObject_CallMethodIdObjArgs(self->raw, &PyId__dealloc_warn, | |
| source, NULL); | |
| if (r) | |
| Py_DECREF(r); | |
| else | |
| PyErr_Clear(); | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| /* | |
| * _BufferedIOMixin methods | |
| * This is not a class, just a collection of methods that will be reused | |
| * by BufferedReader and BufferedWriter | |
| */ | |
| /* Flush and close */ | |
| static PyObject * | |
| buffered_simple_flush(buffered *self, PyObject *args) | |
| { | |
| CHECK_INITIALIZED(self) | |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_flush, NULL); | |
| } | |
| static int | |
| buffered_closed(buffered *self) | |
| { | |
| int closed; | |
| PyObject *res; | |
| CHECK_INITIALIZED_INT(self) | |
| res = PyObject_GetAttr(self->raw, _PyIO_str_closed); | |
| if (res == NULL) | |
| return -1; | |
| closed = PyObject_IsTrue(res); | |
| Py_DECREF(res); | |
| return closed; | |
| } | |
| static PyObject * | |
| buffered_closed_get(buffered *self, void *context) | |
| { | |
| CHECK_INITIALIZED(self) | |
| return PyObject_GetAttr(self->raw, _PyIO_str_closed); | |
| } | |
| static PyObject * | |
| buffered_close(buffered *self, PyObject *args) | |
| { | |
| PyObject *res = NULL, *exc = NULL, *val, *tb; | |
| int r; | |
| CHECK_INITIALIZED(self) | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| r = buffered_closed(self); | |
| if (r < 0) | |
| goto end; | |
| if (r > 0) { | |
| res = Py_None; | |
| Py_INCREF(res); | |
| goto end; | |
| } | |
| if (self->finalizing) { | |
| PyObject *r = buffered_dealloc_warn(self, (PyObject *) self); | |
| if (r) | |
| Py_DECREF(r); | |
| else | |
| PyErr_Clear(); | |
| } | |
| /* flush() will most probably re-take the lock, so drop it first */ | |
| LEAVE_BUFFERED(self) | |
| res = PyObject_CallMethodObjArgs((PyObject *)self, _PyIO_str_flush, NULL); | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| if (res == NULL) | |
| PyErr_Fetch(&exc, &val, &tb); | |
| else | |
| Py_DECREF(res); | |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_close, NULL); | |
| if (self->buffer) { | |
| PyMem_Free(self->buffer); | |
| self->buffer = NULL; | |
| } | |
| if (exc != NULL) { | |
| _PyErr_ChainExceptions(exc, val, tb); | |
| Py_CLEAR(res); | |
| } | |
| end: | |
| LEAVE_BUFFERED(self) | |
| return res; | |
| } | |
| /* detach */ | |
| static PyObject * | |
| buffered_detach(buffered *self, PyObject *args) | |
| { | |
| PyObject *raw, *res; | |
| CHECK_INITIALIZED(self) | |
| res = PyObject_CallMethodObjArgs((PyObject *)self, _PyIO_str_flush, NULL); | |
| if (res == NULL) | |
| return NULL; | |
| Py_DECREF(res); | |
| raw = self->raw; | |
| self->raw = NULL; | |
| self->detached = 1; | |
| self->ok = 0; | |
| return raw; | |
| } | |
| /* Inquiries */ | |
| static PyObject * | |
| buffered_seekable(buffered *self, PyObject *args) | |
| { | |
| CHECK_INITIALIZED(self) | |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_seekable, NULL); | |
| } | |
| static PyObject * | |
| buffered_readable(buffered *self, PyObject *args) | |
| { | |
| CHECK_INITIALIZED(self) | |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_readable, NULL); | |
| } | |
| static PyObject * | |
| buffered_writable(buffered *self, PyObject *args) | |
| { | |
| CHECK_INITIALIZED(self) | |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_writable, NULL); | |
| } | |
| static PyObject * | |
| buffered_name_get(buffered *self, void *context) | |
| { | |
| CHECK_INITIALIZED(self) | |
| return _PyObject_GetAttrId(self->raw, &PyId_name); | |
| } | |
| static PyObject * | |
| buffered_mode_get(buffered *self, void *context) | |
| { | |
| CHECK_INITIALIZED(self) | |
| return _PyObject_GetAttrId(self->raw, &PyId_mode); | |
| } | |
| /* Lower-level APIs */ | |
| static PyObject * | |
| buffered_fileno(buffered *self, PyObject *args) | |
| { | |
| CHECK_INITIALIZED(self) | |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_fileno, NULL); | |
| } | |
| static PyObject * | |
| buffered_isatty(buffered *self, PyObject *args) | |
| { | |
| CHECK_INITIALIZED(self) | |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_isatty, NULL); | |
| } | |
| /* Serialization */ | |
| static PyObject * | |
| buffered_getstate(buffered *self, PyObject *args) | |
| { | |
| PyErr_Format(PyExc_TypeError, | |
| "cannot serialize '%s' object", Py_TYPE(self)->tp_name); | |
| return NULL; | |
| } | |
| /* Forward decls */ | |
| static PyObject * | |
| _bufferedwriter_flush_unlocked(buffered *); | |
| static Py_ssize_t | |
| _bufferedreader_fill_buffer(buffered *self); | |
| static void | |
| _bufferedreader_reset_buf(buffered *self); | |
| static void | |
| _bufferedwriter_reset_buf(buffered *self); | |
| static PyObject * | |
| _bufferedreader_peek_unlocked(buffered *self); | |
| static PyObject * | |
| _bufferedreader_read_all(buffered *self); | |
| static PyObject * | |
| _bufferedreader_read_fast(buffered *self, Py_ssize_t); | |
| static PyObject * | |
| _bufferedreader_read_generic(buffered *self, Py_ssize_t); | |
| static Py_ssize_t | |
| _bufferedreader_raw_read(buffered *self, char *start, Py_ssize_t len); | |
| /* | |
| * Helpers | |
| */ | |
| /* Sets the current error to BlockingIOError */ | |
| static void | |
| _set_BlockingIOError(const char *msg, Py_ssize_t written) | |
| { | |
| PyObject *err; | |
| PyErr_Clear(); | |
| err = PyObject_CallFunction(PyExc_BlockingIOError, "isn", | |
| errno, msg, written); | |
| if (err) | |
| PyErr_SetObject(PyExc_BlockingIOError, err); | |
| Py_XDECREF(err); | |
| } | |
| /* Returns the address of the `written` member if a BlockingIOError was | |
| raised, NULL otherwise. The error is always re-raised. */ | |
| static Py_ssize_t * | |
| _buffered_check_blocking_error(void) | |
| { | |
| PyObject *t, *v, *tb; | |
| PyOSErrorObject *err; | |
| PyErr_Fetch(&t, &v, &tb); | |
| if (v == NULL || !PyErr_GivenExceptionMatches(v, PyExc_BlockingIOError)) { | |
| PyErr_Restore(t, v, tb); | |
| return NULL; | |
| } | |
| err = (PyOSErrorObject *) v; | |
| /* TODO: sanity check (err->written >= 0) */ | |
| PyErr_Restore(t, v, tb); | |
| return &err->written; | |
| } | |
| static Py_off_t | |
| _buffered_raw_tell(buffered *self) | |
| { | |
| Py_off_t n; | |
| PyObject *res; | |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_tell, NULL); | |
| if (res == NULL) | |
| return -1; | |
| n = PyNumber_AsOff_t(res, PyExc_ValueError); | |
| Py_DECREF(res); | |
| if (n < 0) { | |
| if (!PyErr_Occurred()) | |
| PyErr_Format(PyExc_OSError, | |
| "Raw stream returned invalid position %" PY_PRIdOFF, | |
| (PY_OFF_T_COMPAT)n); | |
| return -1; | |
| } | |
| self->abs_pos = n; | |
| return n; | |
| } | |
| static Py_off_t | |
| _buffered_raw_seek(buffered *self, Py_off_t target, int whence) | |
| { | |
| PyObject *res, *posobj, *whenceobj; | |
| Py_off_t n; | |
| posobj = PyLong_FromOff_t(target); | |
| if (posobj == NULL) | |
| return -1; | |
| whenceobj = PyLong_FromLong(whence); | |
| if (whenceobj == NULL) { | |
| Py_DECREF(posobj); | |
| return -1; | |
| } | |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_seek, | |
| posobj, whenceobj, NULL); | |
| Py_DECREF(posobj); | |
| Py_DECREF(whenceobj); | |
| if (res == NULL) | |
| return -1; | |
| n = PyNumber_AsOff_t(res, PyExc_ValueError); | |
| Py_DECREF(res); | |
| if (n < 0) { | |
| if (!PyErr_Occurred()) | |
| PyErr_Format(PyExc_OSError, | |
| "Raw stream returned invalid position %" PY_PRIdOFF, | |
| (PY_OFF_T_COMPAT)n); | |
| return -1; | |
| } | |
| self->abs_pos = n; | |
| return n; | |
| } | |
| static int | |
| _buffered_init(buffered *self) | |
| { | |
| Py_ssize_t n; | |
| if (self->buffer_size <= 0) { | |
| PyErr_SetString(PyExc_ValueError, | |
| "buffer size must be strictly positive"); | |
| return -1; | |
| } | |
| if (self->buffer) | |
| PyMem_Free(self->buffer); | |
| self->buffer = PyMem_Malloc(self->buffer_size); | |
| if (self->buffer == NULL) { | |
| PyErr_NoMemory(); | |
| return -1; | |
| } | |
| if (self->lock) | |
| PyThread_free_lock(self->lock); | |
| self->lock = PyThread_allocate_lock(); | |
| if (self->lock == NULL) { | |
| PyErr_SetString(PyExc_RuntimeError, "can't allocate read lock"); | |
| return -1; | |
| } | |
| self->owner = 0; | |
| /* Find out whether buffer_size is a power of 2 */ | |
| /* XXX is this optimization useful? */ | |
| for (n = self->buffer_size - 1; n & 1; n >>= 1) | |
| ; | |
| if (n == 0) | |
| self->buffer_mask = self->buffer_size - 1; | |
| else | |
| self->buffer_mask = 0; | |
| if (_buffered_raw_tell(self) == -1) | |
| PyErr_Clear(); | |
| return 0; | |
| } | |
| /* Return 1 if an OSError with errno == EINTR is set (and then | |
| clears the error indicator), 0 otherwise. | |
| Should only be called when PyErr_Occurred() is true. | |
| */ | |
| int | |
| _PyIO_trap_eintr(void) | |
| { | |
| static PyObject *eintr_int = NULL; | |
| PyObject *typ, *val, *tb; | |
| PyOSErrorObject *env_err; | |
| if (eintr_int == NULL) { | |
| eintr_int = PyLong_FromLong(EINTR); | |
| assert(eintr_int != NULL); | |
| } | |
| if (!PyErr_ExceptionMatches(PyExc_OSError)) | |
| return 0; | |
| PyErr_Fetch(&typ, &val, &tb); | |
| PyErr_NormalizeException(&typ, &val, &tb); | |
| env_err = (PyOSErrorObject *) val; | |
| assert(env_err != NULL); | |
| if (env_err->myerrno != NULL && | |
| PyObject_RichCompareBool(env_err->myerrno, eintr_int, Py_EQ) > 0) { | |
| Py_DECREF(typ); | |
| Py_DECREF(val); | |
| Py_XDECREF(tb); | |
| return 1; | |
| } | |
| /* This silences any error set by PyObject_RichCompareBool() */ | |
| PyErr_Restore(typ, val, tb); | |
| return 0; | |
| } | |
| /* | |
| * Shared methods and wrappers | |
| */ | |
| static PyObject * | |
| buffered_flush_and_rewind_unlocked(buffered *self) | |
| { | |
| PyObject *res; | |
| res = _bufferedwriter_flush_unlocked(self); | |
| if (res == NULL) | |
| return NULL; | |
| Py_DECREF(res); | |
| if (self->readable) { | |
| /* Rewind the raw stream so that its position corresponds to | |
| the current logical position. */ | |
| Py_off_t n; | |
| n = _buffered_raw_seek(self, -RAW_OFFSET(self), 1); | |
| _bufferedreader_reset_buf(self); | |
| if (n == -1) | |
| return NULL; | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| static PyObject * | |
| buffered_flush(buffered *self, PyObject *args) | |
| { | |
| PyObject *res; | |
| CHECK_INITIALIZED(self) | |
| CHECK_CLOSED(self, "flush of closed file") | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| res = buffered_flush_and_rewind_unlocked(self); | |
| LEAVE_BUFFERED(self) | |
| return res; | |
| } | |
| /*[clinic input] | |
| _io._Buffered.peek | |
| size: Py_ssize_t = 0 | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__Buffered_peek_impl(buffered *self, Py_ssize_t size) | |
| /*[clinic end generated code: output=ba7a097ca230102b input=37ffb97d06ff4adb]*/ | |
| { | |
| PyObject *res = NULL; | |
| CHECK_INITIALIZED(self) | |
| CHECK_CLOSED(self, "peek of closed file") | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| if (self->writable) { | |
| res = buffered_flush_and_rewind_unlocked(self); | |
| if (res == NULL) | |
| goto end; | |
| Py_CLEAR(res); | |
| } | |
| res = _bufferedreader_peek_unlocked(self); | |
| end: | |
| LEAVE_BUFFERED(self) | |
| return res; | |
| } | |
| /*[clinic input] | |
| _io._Buffered.read | |
| size as n: Py_ssize_t(accept={int, NoneType}) = -1 | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__Buffered_read_impl(buffered *self, Py_ssize_t n) | |
| /*[clinic end generated code: output=f41c78bb15b9bbe9 input=7df81e82e08a68a2]*/ | |
| { | |
| PyObject *res; | |
| CHECK_INITIALIZED(self) | |
| if (n < -1) { | |
| PyErr_SetString(PyExc_ValueError, | |
| "read length must be non-negative or -1"); | |
| return NULL; | |
| } | |
| CHECK_CLOSED(self, "read of closed file") | |
| if (n == -1) { | |
| /* The number of bytes is unspecified, read until the end of stream */ | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| res = _bufferedreader_read_all(self); | |
| } | |
| else { | |
| res = _bufferedreader_read_fast(self, n); | |
| if (res != Py_None) | |
| return res; | |
| Py_DECREF(res); | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| res = _bufferedreader_read_generic(self, n); | |
| } | |
| LEAVE_BUFFERED(self) | |
| return res; | |
| } | |
| /*[clinic input] | |
| _io._Buffered.read1 | |
| size as n: Py_ssize_t = -1 | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__Buffered_read1_impl(buffered *self, Py_ssize_t n) | |
| /*[clinic end generated code: output=bcc4fb4e54d103a3 input=7d22de9630b61774]*/ | |
| { | |
| Py_ssize_t have, r; | |
| PyObject *res = NULL; | |
| CHECK_INITIALIZED(self) | |
| if (n < 0) { | |
| n = self->buffer_size; | |
| } | |
| CHECK_CLOSED(self, "read of closed file") | |
| if (n == 0) | |
| return PyBytes_FromStringAndSize(NULL, 0); | |
| /* Return up to n bytes. If at least one byte is buffered, we | |
| only return buffered bytes. Otherwise, we do one raw read. */ | |
| have = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); | |
| if (have > 0) { | |
| n = Py_MIN(have, n); | |
| res = _bufferedreader_read_fast(self, n); | |
| assert(res != Py_None); | |
| return res; | |
| } | |
| res = PyBytes_FromStringAndSize(NULL, n); | |
| if (res == NULL) | |
| return NULL; | |
| if (!ENTER_BUFFERED(self)) { | |
| Py_DECREF(res); | |
| return NULL; | |
| } | |
| _bufferedreader_reset_buf(self); | |
| r = _bufferedreader_raw_read(self, PyBytes_AS_STRING(res), n); | |
| LEAVE_BUFFERED(self) | |
| if (r == -1) { | |
| Py_DECREF(res); | |
| return NULL; | |
| } | |
| if (r == -2) | |
| r = 0; | |
| if (n > r) | |
| _PyBytes_Resize(&res, r); | |
| return res; | |
| } | |
| static PyObject * | |
| _buffered_readinto_generic(buffered *self, Py_buffer *buffer, char readinto1) | |
| { | |
| Py_ssize_t n, written = 0, remaining; | |
| PyObject *res = NULL; | |
| CHECK_INITIALIZED(self) | |
| n = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); | |
| if (n > 0) { | |
| if (n >= buffer->len) { | |
| memcpy(buffer->buf, self->buffer + self->pos, buffer->len); | |
| self->pos += buffer->len; | |
| return PyLong_FromSsize_t(buffer->len); | |
| } | |
| memcpy(buffer->buf, self->buffer + self->pos, n); | |
| self->pos += n; | |
| written = n; | |
| } | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| if (self->writable) { | |
| res = buffered_flush_and_rewind_unlocked(self); | |
| if (res == NULL) | |
| goto end; | |
| Py_CLEAR(res); | |
| } | |
| _bufferedreader_reset_buf(self); | |
| self->pos = 0; | |
| for (remaining = buffer->len - written; | |
| remaining > 0; | |
| written += n, remaining -= n) { | |
| /* If remaining bytes is larger than internal buffer size, copy | |
| * directly into caller's buffer. */ | |
| if (remaining > self->buffer_size) { | |
| n = _bufferedreader_raw_read(self, (char *) buffer->buf + written, | |
| remaining); | |
| } | |
| /* In readinto1 mode, we do not want to fill the internal | |
| buffer if we already have some data to return */ | |
| else if (!(readinto1 && written)) { | |
| n = _bufferedreader_fill_buffer(self); | |
| if (n > 0) { | |
| if (n > remaining) | |
| n = remaining; | |
| memcpy((char *) buffer->buf + written, | |
| self->buffer + self->pos, n); | |
| self->pos += n; | |
| continue; /* short circuit */ | |
| } | |
| } | |
| else | |
| n = 0; | |
| if (n == 0 || (n == -2 && written > 0)) | |
| break; | |
| if (n < 0) { | |
| if (n == -2) { | |
| Py_INCREF(Py_None); | |
| res = Py_None; | |
| } | |
| goto end; | |
| } | |
| /* At most one read in readinto1 mode */ | |
| if (readinto1) { | |
| written += n; | |
| break; | |
| } | |
| } | |
| res = PyLong_FromSsize_t(written); | |
| end: | |
| LEAVE_BUFFERED(self); | |
| return res; | |
| } | |
| /*[clinic input] | |
| _io._Buffered.readinto | |
| buffer: Py_buffer(accept={rwbuffer}) | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__Buffered_readinto_impl(buffered *self, Py_buffer *buffer) | |
| /*[clinic end generated code: output=bcb376580b1d8170 input=ed6b98b7a20a3008]*/ | |
| { | |
| return _buffered_readinto_generic(self, buffer, 0); | |
| } | |
| /*[clinic input] | |
| _io._Buffered.readinto1 | |
| buffer: Py_buffer(accept={rwbuffer}) | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__Buffered_readinto1_impl(buffered *self, Py_buffer *buffer) | |
| /*[clinic end generated code: output=6e5c6ac5868205d6 input=4455c5d55fdf1687]*/ | |
| { | |
| return _buffered_readinto_generic(self, buffer, 1); | |
| } | |
| static PyObject * | |
| _buffered_readline(buffered *self, Py_ssize_t limit) | |
| { | |
| PyObject *res = NULL; | |
| PyObject *chunks = NULL; | |
| Py_ssize_t n, written = 0; | |
| const char *start, *s, *end; | |
| CHECK_CLOSED(self, "readline of closed file") | |
| /* First, try to find a line in the buffer. This can run unlocked because | |
| the calls to the C API are simple enough that they can't trigger | |
| any thread switch. */ | |
| n = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); | |
| if (limit >= 0 && n > limit) | |
| n = limit; | |
| start = self->buffer + self->pos; | |
| s = memchr(start, '\n', n); | |
| if (s != NULL) { | |
| res = PyBytes_FromStringAndSize(start, s - start + 1); | |
| if (res != NULL) | |
| self->pos += s - start + 1; | |
| goto end_unlocked; | |
| } | |
| if (n == limit) { | |
| res = PyBytes_FromStringAndSize(start, n); | |
| if (res != NULL) | |
| self->pos += n; | |
| goto end_unlocked; | |
| } | |
| if (!ENTER_BUFFERED(self)) | |
| goto end_unlocked; | |
| /* Now we try to get some more from the raw stream */ | |
| chunks = PyList_New(0); | |
| if (chunks == NULL) | |
| goto end; | |
| if (n > 0) { | |
| res = PyBytes_FromStringAndSize(start, n); | |
| if (res == NULL) | |
| goto end; | |
| if (PyList_Append(chunks, res) < 0) { | |
| Py_CLEAR(res); | |
| goto end; | |
| } | |
| Py_CLEAR(res); | |
| written += n; | |
| self->pos += n; | |
| if (limit >= 0) | |
| limit -= n; | |
| } | |
| if (self->writable) { | |
| PyObject *r = buffered_flush_and_rewind_unlocked(self); | |
| if (r == NULL) | |
| goto end; | |
| Py_DECREF(r); | |
| } | |
| for (;;) { | |
| _bufferedreader_reset_buf(self); | |
| n = _bufferedreader_fill_buffer(self); | |
| if (n == -1) | |
| goto end; | |
| if (n <= 0) | |
| break; | |
| if (limit >= 0 && n > limit) | |
| n = limit; | |
| start = self->buffer; | |
| end = start + n; | |
| s = start; | |
| while (s < end) { | |
| if (*s++ == '\n') { | |
| res = PyBytes_FromStringAndSize(start, s - start); | |
| if (res == NULL) | |
| goto end; | |
| self->pos = s - start; | |
| goto found; | |
| } | |
| } | |
| res = PyBytes_FromStringAndSize(start, n); | |
| if (res == NULL) | |
| goto end; | |
| if (n == limit) { | |
| self->pos = n; | |
| break; | |
| } | |
| if (PyList_Append(chunks, res) < 0) { | |
| Py_CLEAR(res); | |
| goto end; | |
| } | |
| Py_CLEAR(res); | |
| written += n; | |
| if (limit >= 0) | |
| limit -= n; | |
| } | |
| found: | |
| if (res != NULL && PyList_Append(chunks, res) < 0) { | |
| Py_CLEAR(res); | |
| goto end; | |
| } | |
| Py_XSETREF(res, _PyBytes_Join(_PyIO_empty_bytes, chunks)); | |
| end: | |
| LEAVE_BUFFERED(self) | |
| end_unlocked: | |
| Py_XDECREF(chunks); | |
| return res; | |
| } | |
| /*[clinic input] | |
| _io._Buffered.readline | |
| size: Py_ssize_t(accept={int, NoneType}) = -1 | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__Buffered_readline_impl(buffered *self, Py_ssize_t size) | |
| /*[clinic end generated code: output=24dd2aa6e33be83c input=673b6240e315ef8a]*/ | |
| { | |
| CHECK_INITIALIZED(self) | |
| return _buffered_readline(self, size); | |
| } | |
| static PyObject * | |
| buffered_tell(buffered *self, PyObject *args) | |
| { | |
| Py_off_t pos; | |
| CHECK_INITIALIZED(self) | |
| pos = _buffered_raw_tell(self); | |
| if (pos == -1) | |
| return NULL; | |
| pos -= RAW_OFFSET(self); | |
| /* TODO: sanity check (pos >= 0) */ | |
| return PyLong_FromOff_t(pos); | |
| } | |
| /*[clinic input] | |
| _io._Buffered.seek | |
| target as targetobj: object | |
| whence: int = 0 | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__Buffered_seek_impl(buffered *self, PyObject *targetobj, int whence) | |
| /*[clinic end generated code: output=7ae0e8dc46efdefb input=a9c4920bfcba6163]*/ | |
| { | |
| Py_off_t target, n; | |
| PyObject *res = NULL; | |
| CHECK_INITIALIZED(self) | |
| /* Do some error checking instead of trusting OS 'seek()' | |
| ** error detection, just in case. | |
| */ | |
| if ((whence < 0 || whence >2) | |
| #ifdef SEEK_HOLE | |
| && (whence != SEEK_HOLE) | |
| #endif | |
| #ifdef SEEK_DATA | |
| && (whence != SEEK_DATA) | |
| #endif | |
| ) { | |
| PyErr_Format(PyExc_ValueError, | |
| "whence value %d unsupported", whence); | |
| return NULL; | |
| } | |
| CHECK_CLOSED(self, "seek of closed file") | |
| if (_PyIOBase_check_seekable(self->raw, Py_True) == NULL) | |
| return NULL; | |
| target = PyNumber_AsOff_t(targetobj, PyExc_ValueError); | |
| if (target == -1 && PyErr_Occurred()) | |
| return NULL; | |
| /* SEEK_SET and SEEK_CUR are special because we could seek inside the | |
| buffer. Other whence values must be managed without this optimization. | |
| Some Operating Systems can provide additional values, like | |
| SEEK_HOLE/SEEK_DATA. */ | |
| if (((whence == 0) || (whence == 1)) && self->readable) { | |
| Py_off_t current, avail; | |
| /* Check if seeking leaves us inside the current buffer, | |
| so as to return quickly if possible. Also, we needn't take the | |
| lock in this fast path. | |
| Don't know how to do that when whence == 2, though. */ | |
| /* NOTE: RAW_TELL() can release the GIL but the object is in a stable | |
| state at this point. */ | |
| current = RAW_TELL(self); | |
| avail = READAHEAD(self); | |
| if (avail > 0) { | |
| Py_off_t offset; | |
| if (whence == 0) | |
| offset = target - (current - RAW_OFFSET(self)); | |
| else | |
| offset = target; | |
| if (offset >= -self->pos && offset <= avail) { | |
| self->pos += offset; | |
| return PyLong_FromOff_t(current - avail + offset); | |
| } | |
| } | |
| } | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| /* Fallback: invoke raw seek() method and clear buffer */ | |
| if (self->writable) { | |
| res = _bufferedwriter_flush_unlocked(self); | |
| if (res == NULL) | |
| goto end; | |
| Py_CLEAR(res); | |
| } | |
| /* TODO: align on block boundary and read buffer if needed? */ | |
| if (whence == 1) | |
| target -= RAW_OFFSET(self); | |
| n = _buffered_raw_seek(self, target, whence); | |
| if (n == -1) | |
| goto end; | |
| self->raw_pos = -1; | |
| res = PyLong_FromOff_t(n); | |
| if (res != NULL && self->readable) | |
| _bufferedreader_reset_buf(self); | |
| end: | |
| LEAVE_BUFFERED(self) | |
| return res; | |
| } | |
| /*[clinic input] | |
| _io._Buffered.truncate | |
| pos: object = None | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io__Buffered_truncate_impl(buffered *self, PyObject *pos) | |
| /*[clinic end generated code: output=667ca03c60c270de input=8a1be34d57cca2d3]*/ | |
| { | |
| PyObject *res = NULL; | |
| CHECK_INITIALIZED(self) | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| if (self->writable) { | |
| res = buffered_flush_and_rewind_unlocked(self); | |
| if (res == NULL) | |
| goto end; | |
| Py_CLEAR(res); | |
| } | |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_truncate, pos, NULL); | |
| if (res == NULL) | |
| goto end; | |
| /* Reset cached position */ | |
| if (_buffered_raw_tell(self) == -1) | |
| PyErr_Clear(); | |
| end: | |
| LEAVE_BUFFERED(self) | |
| return res; | |
| } | |
| static PyObject * | |
| buffered_iternext(buffered *self) | |
| { | |
| PyObject *line; | |
| PyTypeObject *tp; | |
| CHECK_INITIALIZED(self); | |
| tp = Py_TYPE(self); | |
| if (tp == &PyBufferedReader_Type || | |
| tp == &PyBufferedRandom_Type) { | |
| /* Skip method call overhead for speed */ | |
| line = _buffered_readline(self, -1); | |
| } | |
| else { | |
| line = PyObject_CallMethodObjArgs((PyObject *)self, | |
| _PyIO_str_readline, NULL); | |
| if (line && !PyBytes_Check(line)) { | |
| PyErr_Format(PyExc_OSError, | |
| "readline() should have returned a bytes object, " | |
| "not '%.200s'", Py_TYPE(line)->tp_name); | |
| Py_DECREF(line); | |
| return NULL; | |
| } | |
| } | |
| if (line == NULL) | |
| return NULL; | |
| if (PyBytes_GET_SIZE(line) == 0) { | |
| /* Reached EOF or would have blocked */ | |
| Py_DECREF(line); | |
| return NULL; | |
| } | |
| return line; | |
| } | |
| static PyObject * | |
| buffered_repr(buffered *self) | |
| { | |
| PyObject *nameobj, *res; | |
| nameobj = _PyObject_GetAttrId((PyObject *) self, &PyId_name); | |
| if (nameobj == NULL) { | |
| if (PyErr_ExceptionMatches(PyExc_Exception)) | |
| PyErr_Clear(); | |
| else | |
| return NULL; | |
| res = PyUnicode_FromFormat("<%s>", Py_TYPE(self)->tp_name); | |
| } | |
| else { | |
| int status = Py_ReprEnter((PyObject *)self); | |
| res = NULL; | |
| if (status == 0) { | |
| res = PyUnicode_FromFormat("<%s name=%R>", | |
| Py_TYPE(self)->tp_name, nameobj); | |
| Py_ReprLeave((PyObject *)self); | |
| } | |
| else if (status > 0) { | |
| PyErr_Format(PyExc_RuntimeError, | |
| "reentrant call inside %s.__repr__", | |
| Py_TYPE(self)->tp_name); | |
| } | |
| Py_DECREF(nameobj); | |
| } | |
| return res; | |
| } | |
| /* | |
| * class BufferedReader | |
| */ | |
| static void _bufferedreader_reset_buf(buffered *self) | |
| { | |
| self->read_end = -1; | |
| } | |
| /*[clinic input] | |
| _io.BufferedReader.__init__ | |
| raw: object | |
| buffer_size: Py_ssize_t(c_default="DEFAULT_BUFFER_SIZE") = DEFAULT_BUFFER_SIZE | |
| Create a new buffered reader using the given readable raw IO object. | |
| [clinic start generated code]*/ | |
| static int | |
| _io_BufferedReader___init___impl(buffered *self, PyObject *raw, | |
| Py_ssize_t buffer_size) | |
| /*[clinic end generated code: output=cddcfefa0ed294c4 input=fb887e06f11b4e48]*/ | |
| { | |
| self->ok = 0; | |
| self->detached = 0; | |
| if (_PyIOBase_check_readable(raw, Py_True) == NULL) | |
| return -1; | |
| Py_INCREF(raw); | |
| Py_XSETREF(self->raw, raw); | |
| self->buffer_size = buffer_size; | |
| self->readable = 1; | |
| self->writable = 0; | |
| if (_buffered_init(self) < 0) | |
| return -1; | |
| _bufferedreader_reset_buf(self); | |
| self->fast_closed_checks = (Py_TYPE(self) == &PyBufferedReader_Type && | |
| Py_TYPE(raw) == &PyFileIO_Type); | |
| self->ok = 1; | |
| return 0; | |
| } | |
| static Py_ssize_t | |
| _bufferedreader_raw_read(buffered *self, char *start, Py_ssize_t len) | |
| { | |
| Py_buffer buf; | |
| PyObject *memobj, *res; | |
| Py_ssize_t n; | |
| /* NOTE: the buffer needn't be released as its object is NULL. */ | |
| if (PyBuffer_FillInfo(&buf, NULL, start, len, 0, PyBUF_CONTIG) == -1) | |
| return -1; | |
| memobj = PyMemoryView_FromBuffer(&buf); | |
| if (memobj == NULL) | |
| return -1; | |
| /* NOTE: PyErr_SetFromErrno() calls PyErr_CheckSignals() when EINTR | |
| occurs so we needn't do it ourselves. | |
| We then retry reading, ignoring the signal if no handler has | |
| raised (see issue #10956). | |
| */ | |
| do { | |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_readinto, memobj, NULL); | |
| } while (res == NULL && _PyIO_trap_eintr()); | |
| Py_DECREF(memobj); | |
| if (res == NULL) | |
| return -1; | |
| if (res == Py_None) { | |
| /* Non-blocking stream would have blocked. Special return code! */ | |
| Py_DECREF(res); | |
| return -2; | |
| } | |
| n = PyNumber_AsSsize_t(res, PyExc_ValueError); | |
| Py_DECREF(res); | |
| if (n < 0 || n > len) { | |
| PyErr_Format(PyExc_OSError, | |
| "raw readinto() returned invalid length %zd " | |
| "(should have been between 0 and %zd)", n, len); | |
| return -1; | |
| } | |
| if (n > 0 && self->abs_pos != -1) | |
| self->abs_pos += n; | |
| return n; | |
| } | |
| static Py_ssize_t | |
| _bufferedreader_fill_buffer(buffered *self) | |
| { | |
| Py_ssize_t start, len, n; | |
| if (VALID_READ_BUFFER(self)) | |
| start = Py_SAFE_DOWNCAST(self->read_end, Py_off_t, Py_ssize_t); | |
| else | |
| start = 0; | |
| len = self->buffer_size - start; | |
| n = _bufferedreader_raw_read(self, self->buffer + start, len); | |
| if (n <= 0) | |
| return n; | |
| self->read_end = start + n; | |
| self->raw_pos = start + n; | |
| return n; | |
| } | |
| static PyObject * | |
| _bufferedreader_read_all(buffered *self) | |
| { | |
| Py_ssize_t current_size; | |
| PyObject *res = NULL, *data = NULL, *tmp = NULL, *chunks = NULL, *readall; | |
| /* First copy what we have in the current buffer. */ | |
| current_size = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); | |
| if (current_size) { | |
| data = PyBytes_FromStringAndSize( | |
| self->buffer + self->pos, current_size); | |
| if (data == NULL) | |
| return NULL; | |
| self->pos += current_size; | |
| } | |
| /* We're going past the buffer's bounds, flush it */ | |
| if (self->writable) { | |
| tmp = buffered_flush_and_rewind_unlocked(self); | |
| if (tmp == NULL) | |
| goto cleanup; | |
| Py_CLEAR(tmp); | |
| } | |
| _bufferedreader_reset_buf(self); | |
| if (_PyObject_LookupAttr(self->raw, _PyIO_str_readall, &readall) < 0) { | |
| goto cleanup; | |
| } | |
| if (readall) { | |
| tmp = _PyObject_CallNoArg(readall); | |
| Py_DECREF(readall); | |
| if (tmp == NULL) | |
| goto cleanup; | |
| if (tmp != Py_None && !PyBytes_Check(tmp)) { | |
| PyErr_SetString(PyExc_TypeError, "readall() should return bytes"); | |
| goto cleanup; | |
| } | |
| if (current_size == 0) { | |
| res = tmp; | |
| } else { | |
| if (tmp != Py_None) { | |
| PyBytes_Concat(&data, tmp); | |
| } | |
| res = data; | |
| } | |
| goto cleanup; | |
| } | |
| chunks = PyList_New(0); | |
| if (chunks == NULL) | |
| goto cleanup; | |
| while (1) { | |
| if (data) { | |
| if (PyList_Append(chunks, data) < 0) | |
| goto cleanup; | |
| Py_CLEAR(data); | |
| } | |
| /* Read until EOF or until read() would block. */ | |
| data = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_read, NULL); | |
| if (data == NULL) | |
| goto cleanup; | |
| if (data != Py_None && !PyBytes_Check(data)) { | |
| PyErr_SetString(PyExc_TypeError, "read() should return bytes"); | |
| goto cleanup; | |
| } | |
| if (data == Py_None || PyBytes_GET_SIZE(data) == 0) { | |
| if (current_size == 0) { | |
| res = data; | |
| goto cleanup; | |
| } | |
| else { | |
| tmp = _PyBytes_Join(_PyIO_empty_bytes, chunks); | |
| res = tmp; | |
| goto cleanup; | |
| } | |
| } | |
| current_size += PyBytes_GET_SIZE(data); | |
| if (self->abs_pos != -1) | |
| self->abs_pos += PyBytes_GET_SIZE(data); | |
| } | |
| cleanup: | |
| /* res is either NULL or a borrowed ref */ | |
| Py_XINCREF(res); | |
| Py_XDECREF(data); | |
| Py_XDECREF(tmp); | |
| Py_XDECREF(chunks); | |
| return res; | |
| } | |
| /* Read n bytes from the buffer if it can, otherwise return None. | |
| This function is simple enough that it can run unlocked. */ | |
| static PyObject * | |
| _bufferedreader_read_fast(buffered *self, Py_ssize_t n) | |
| { | |
| Py_ssize_t current_size; | |
| current_size = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); | |
| if (n <= current_size) { | |
| /* Fast path: the data to read is fully buffered. */ | |
| PyObject *res = PyBytes_FromStringAndSize(self->buffer + self->pos, n); | |
| if (res != NULL) | |
| self->pos += n; | |
| return res; | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| /* Generic read function: read from the stream until enough bytes are read, | |
| * or until an EOF occurs or until read() would block. | |
| */ | |
| static PyObject * | |
| _bufferedreader_read_generic(buffered *self, Py_ssize_t n) | |
| { | |
| PyObject *res = NULL; | |
| Py_ssize_t current_size, remaining, written; | |
| char *out; | |
| current_size = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); | |
| if (n <= current_size) | |
| return _bufferedreader_read_fast(self, n); | |
| res = PyBytes_FromStringAndSize(NULL, n); | |
| if (res == NULL) | |
| goto error; | |
| out = PyBytes_AS_STRING(res); | |
| remaining = n; | |
| written = 0; | |
| if (current_size > 0) { | |
| memcpy(out, self->buffer + self->pos, current_size); | |
| remaining -= current_size; | |
| written += current_size; | |
| self->pos += current_size; | |
| } | |
| /* Flush the write buffer if necessary */ | |
| if (self->writable) { | |
| PyObject *r = buffered_flush_and_rewind_unlocked(self); | |
| if (r == NULL) | |
| goto error; | |
| Py_DECREF(r); | |
| } | |
| _bufferedreader_reset_buf(self); | |
| while (remaining > 0) { | |
| /* We want to read a whole block at the end into buffer. | |
| If we had readv() we could do this in one pass. */ | |
| Py_ssize_t r = MINUS_LAST_BLOCK(self, remaining); | |
| if (r == 0) | |
| break; | |
| r = _bufferedreader_raw_read(self, out + written, r); | |
| if (r == -1) | |
| goto error; | |
| if (r == 0 || r == -2) { | |
| /* EOF occurred or read() would block. */ | |
| if (r == 0 || written > 0) { | |
| if (_PyBytes_Resize(&res, written)) | |
| goto error; | |
| return res; | |
| } | |
| Py_DECREF(res); | |
| Py_RETURN_NONE; | |
| } | |
| remaining -= r; | |
| written += r; | |
| } | |
| assert(remaining <= self->buffer_size); | |
| self->pos = 0; | |
| self->raw_pos = 0; | |
| self->read_end = 0; | |
| /* NOTE: when the read is satisfied, we avoid issuing any additional | |
| reads, which could block indefinitely (e.g. on a socket). | |
| See issue #9550. */ | |
| while (remaining > 0 && self->read_end < self->buffer_size) { | |
| Py_ssize_t r = _bufferedreader_fill_buffer(self); | |
| if (r == -1) | |
| goto error; | |
| if (r == 0 || r == -2) { | |
| /* EOF occurred or read() would block. */ | |
| if (r == 0 || written > 0) { | |
| if (_PyBytes_Resize(&res, written)) | |
| goto error; | |
| return res; | |
| } | |
| Py_DECREF(res); | |
| Py_RETURN_NONE; | |
| } | |
| if (remaining > r) { | |
| memcpy(out + written, self->buffer + self->pos, r); | |
| written += r; | |
| self->pos += r; | |
| remaining -= r; | |
| } | |
| else if (remaining > 0) { | |
| memcpy(out + written, self->buffer + self->pos, remaining); | |
| written += remaining; | |
| self->pos += remaining; | |
| remaining = 0; | |
| } | |
| if (remaining == 0) | |
| break; | |
| } | |
| return res; | |
| error: | |
| Py_XDECREF(res); | |
| return NULL; | |
| } | |
| static PyObject * | |
| _bufferedreader_peek_unlocked(buffered *self) | |
| { | |
| Py_ssize_t have, r; | |
| have = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); | |
| /* Constraints: | |
| 1. we don't want to advance the file position. | |
| 2. we don't want to lose block alignment, so we can't shift the buffer | |
| to make some place. | |
| Therefore, we either return `have` bytes (if > 0), or a full buffer. | |
| */ | |
| if (have > 0) { | |
| return PyBytes_FromStringAndSize(self->buffer + self->pos, have); | |
| } | |
| /* Fill the buffer from the raw stream, and copy it to the result. */ | |
| _bufferedreader_reset_buf(self); | |
| r = _bufferedreader_fill_buffer(self); | |
| if (r == -1) | |
| return NULL; | |
| if (r == -2) | |
| r = 0; | |
| self->pos = 0; | |
| return PyBytes_FromStringAndSize(self->buffer, r); | |
| } | |
| /* | |
| * class BufferedWriter | |
| */ | |
| static void | |
| _bufferedwriter_reset_buf(buffered *self) | |
| { | |
| self->write_pos = 0; | |
| self->write_end = -1; | |
| } | |
| /*[clinic input] | |
| _io.BufferedWriter.__init__ | |
| raw: object | |
| buffer_size: Py_ssize_t(c_default="DEFAULT_BUFFER_SIZE") = DEFAULT_BUFFER_SIZE | |
| A buffer for a writeable sequential RawIO object. | |
| The constructor creates a BufferedWriter for the given writeable raw | |
| stream. If the buffer_size is not given, it defaults to | |
| DEFAULT_BUFFER_SIZE. | |
| [clinic start generated code]*/ | |
| static int | |
| _io_BufferedWriter___init___impl(buffered *self, PyObject *raw, | |
| Py_ssize_t buffer_size) | |
| /*[clinic end generated code: output=c8942a020c0dee64 input=914be9b95e16007b]*/ | |
| { | |
| self->ok = 0; | |
| self->detached = 0; | |
| if (_PyIOBase_check_writable(raw, Py_True) == NULL) | |
| return -1; | |
| Py_INCREF(raw); | |
| Py_XSETREF(self->raw, raw); | |
| self->readable = 0; | |
| self->writable = 1; | |
| self->buffer_size = buffer_size; | |
| if (_buffered_init(self) < 0) | |
| return -1; | |
| _bufferedwriter_reset_buf(self); | |
| self->pos = 0; | |
| self->fast_closed_checks = (Py_TYPE(self) == &PyBufferedWriter_Type && | |
| Py_TYPE(raw) == &PyFileIO_Type); | |
| self->ok = 1; | |
| return 0; | |
| } | |
| static Py_ssize_t | |
| _bufferedwriter_raw_write(buffered *self, char *start, Py_ssize_t len) | |
| { | |
| Py_buffer buf; | |
| PyObject *memobj, *res; | |
| Py_ssize_t n; | |
| int errnum; | |
| /* NOTE: the buffer needn't be released as its object is NULL. */ | |
| if (PyBuffer_FillInfo(&buf, NULL, start, len, 1, PyBUF_CONTIG_RO) == -1) | |
| return -1; | |
| memobj = PyMemoryView_FromBuffer(&buf); | |
| if (memobj == NULL) | |
| return -1; | |
| /* NOTE: PyErr_SetFromErrno() calls PyErr_CheckSignals() when EINTR | |
| occurs so we needn't do it ourselves. | |
| We then retry writing, ignoring the signal if no handler has | |
| raised (see issue #10956). | |
| */ | |
| do { | |
| errno = 0; | |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_write, memobj, NULL); | |
| errnum = errno; | |
| } while (res == NULL && _PyIO_trap_eintr()); | |
| Py_DECREF(memobj); | |
| if (res == NULL) | |
| return -1; | |
| if (res == Py_None) { | |
| /* Non-blocking stream would have blocked. Special return code! | |
| Being paranoid we reset errno in case it is changed by code | |
| triggered by a decref. errno is used by _set_BlockingIOError(). */ | |
| Py_DECREF(res); | |
| errno = errnum; | |
| return -2; | |
| } | |
| n = PyNumber_AsSsize_t(res, PyExc_ValueError); | |
| Py_DECREF(res); | |
| if (n < 0 || n > len) { | |
| PyErr_Format(PyExc_OSError, | |
| "raw write() returned invalid length %zd " | |
| "(should have been between 0 and %zd)", n, len); | |
| return -1; | |
| } | |
| if (n > 0 && self->abs_pos != -1) | |
| self->abs_pos += n; | |
| return n; | |
| } | |
| static PyObject * | |
| _bufferedwriter_flush_unlocked(buffered *self) | |
| { | |
| Py_ssize_t written = 0; | |
| Py_off_t n, rewind; | |
| if (!VALID_WRITE_BUFFER(self) || self->write_pos == self->write_end) | |
| goto end; | |
| /* First, rewind */ | |
| rewind = RAW_OFFSET(self) + (self->pos - self->write_pos); | |
| if (rewind != 0) { | |
| n = _buffered_raw_seek(self, -rewind, 1); | |
| if (n < 0) { | |
| goto error; | |
| } | |
| self->raw_pos -= rewind; | |
| } | |
| while (self->write_pos < self->write_end) { | |
| n = _bufferedwriter_raw_write(self, | |
| self->buffer + self->write_pos, | |
| Py_SAFE_DOWNCAST(self->write_end - self->write_pos, | |
| Py_off_t, Py_ssize_t)); | |
| if (n == -1) { | |
| goto error; | |
| } | |
| else if (n == -2) { | |
| _set_BlockingIOError("write could not complete without blocking", | |
| 0); | |
| goto error; | |
| } | |
| self->write_pos += n; | |
| self->raw_pos = self->write_pos; | |
| written += Py_SAFE_DOWNCAST(n, Py_off_t, Py_ssize_t); | |
| /* Partial writes can return successfully when interrupted by a | |
| signal (see write(2)). We must run signal handlers before | |
| blocking another time, possibly indefinitely. */ | |
| if (PyErr_CheckSignals() < 0) | |
| goto error; | |
| } | |
| end: | |
| /* This ensures that after return from this function, | |
| VALID_WRITE_BUFFER(self) returns false. | |
| This is a required condition because when a tell() is called | |
| after flushing and if VALID_READ_BUFFER(self) is false, we need | |
| VALID_WRITE_BUFFER(self) to be false to have | |
| RAW_OFFSET(self) == 0. | |
| Issue: https://bugs.python.org/issue32228 */ | |
| _bufferedwriter_reset_buf(self); | |
| Py_RETURN_NONE; | |
| error: | |
| return NULL; | |
| } | |
| /*[clinic input] | |
| _io.BufferedWriter.write | |
| buffer: Py_buffer | |
| / | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| _io_BufferedWriter_write_impl(buffered *self, Py_buffer *buffer) | |
| /*[clinic end generated code: output=7f8d1365759bfc6b input=dd87dd85fc7f8850]*/ | |
| { | |
| PyObject *res = NULL; | |
| Py_ssize_t written, avail, remaining; | |
| Py_off_t offset; | |
| CHECK_INITIALIZED(self) | |
| if (!ENTER_BUFFERED(self)) | |
| return NULL; | |
| /* Issue #31976: Check for closed file after acquiring the lock. Another | |
| thread could be holding the lock while closing the file. */ | |
| if (IS_CLOSED(self)) { | |
| PyErr_SetString(PyExc_ValueError, "write to closed file"); | |
| goto error; | |
| } | |
| /* Fast path: the data to write can be fully buffered. */ | |
| if (!VALID_READ_BUFFER(self) && !VALID_WRITE_BUFFER(self)) { | |
| self->pos = 0; | |
| self->raw_pos = 0; | |
| } | |
| avail = Py_SAFE_DOWNCAST(self->buffer_size - self->pos, Py_off_t, Py_ssize_t); | |
| if (buffer->len <= avail) { | |
| memcpy(self->buffer + self->pos, buffer->buf, buffer->len); | |
| if (!VALID_WRITE_BUFFER(self) || self->write_pos > self->pos) { | |
| self->write_pos = self->pos; | |
| } | |
| ADJUST_POSITION(self, self->pos + buffer->len); | |
| if (self->pos > self->write_end) | |
| self->write_end = self->pos; | |
| written = buffer->len; | |
| goto end; | |
| } | |
| /* First write the current buffer */ | |
| res = _bufferedwriter_flush_unlocked(self); | |
| if (res == NULL) { | |
| Py_ssize_t *w = _buffered_check_blocking_error(); | |
| if (w == NULL) | |
| goto error; | |
| if (self->readable) | |
| _bufferedreader_reset_buf(self); | |
| /* Make some place by shifting the buffer. */ | |
| assert(VALID_WRITE_BUFFER(self)); | |
| memmove(self->buffer, self->buffer + self->write_pos, | |
| Py_SAFE_DOWNCAST(self->write_end - self->write_pos, | |
| Py_off_t, Py_ssize_t)); | |
| self->write_end -= self->write_pos; | |
| self->raw_pos -= self->write_pos; | |
| self->pos -= self->write_pos; | |
| self->write_pos = 0; | |
| avail = Py_SAFE_DOWNCAST(self->buffer_size - self->write_end, | |
| Py_off_t, Py_ssize_t); | |
| if (buffer->len <= avail) { | |
| /* Everything can be buffered */ | |
| PyErr_Clear(); | |
| memcpy(self->buffer + self->write_end, buffer->buf, buffer->len); | |
| self->write_end += buffer->len; | |
| self->pos += buffer->len; | |
| written = buffer->len; | |
| goto end; | |
| } | |
| /* Buffer as much as possible. */ | |
| memcpy(self->buffer + self->write_end, buffer->buf, avail); | |
| self->write_end += avail; | |
| self->pos += avail; | |
| /* XXX Modifying the existing exception e using the pointer w | |
| will change e.characters_written but not e.args[2]. | |
| Therefore we just replace with a new error. */ | |
| _set_BlockingIOError("write could not complete without blocking", | |
| avail); | |
| goto error; | |
| } | |
| Py_CLEAR(res); | |
| /* Adjust the raw stream position if it is away from the logical stream | |
| position. This happens if the read buffer has been filled but not | |
| modified (and therefore _bufferedwriter_flush_unlocked() didn't rewind | |
| the raw stream by itself). | |
| Fixes issue #6629. | |
| */ | |
| offset = RAW_OFFSET(self); | |
| if (offset != 0) { | |
| if (_buffered_raw_seek(self, -offset, 1) < 0) | |
| goto error; | |
| self->raw_pos -= offset; | |
| } | |
| /* Then write buf itself. At this point the buffer has been emptied. */ | |
| remaining = buffer->len; | |
| written = 0; | |
| while (remaining > self->buffer_size) { | |
| Py_ssize_t n = _bufferedwriter_raw_write( | |
| self, (char *) buffer->buf + written, buffer->len - written); | |
| if (n == -1) { | |
| goto error; | |
| } else if (n == -2) { | |
| /* Write failed because raw file is non-blocking */ | |
| if (remaining > self->buffer_size) { | |
| /* Can't buffer everything, still buffer as much as possible */ | |
| memcpy(self->buffer, | |
| (char *) buffer->buf + written, self->buffer_size); | |
| self->raw_pos = 0; | |
| ADJUST_POSITION(self, self->buffer_size); | |
| self->write_end = self->buffer_size; | |
| written += self->buffer_size; | |
| _set_BlockingIOError("write could not complete without " | |
| "blocking", written); | |
| goto error; | |
| } | |
| PyErr_Clear(); | |
| break; | |
| } | |
| written += n; | |
| remaining -= n; | |
| /* Partial writes can return successfully when interrupted by a | |
| signal (see write(2)). We must run signal handlers before | |
| blocking another time, possibly indefinitely. */ | |
| if (PyErr_CheckSignals() < 0) | |
| goto error; | |
| } | |
| if (self->readable) | |
| _bufferedreader_reset_buf(self); | |
| if (remaining > 0) { | |
| memcpy(self->buffer, (char *) buffer->buf + written, remaining); | |
| written += remaining; | |
| } | |
| self->write_pos = 0; | |
| /* TODO: sanity check (remaining >= 0) */ | |
| self->write_end = remaining; | |
| ADJUST_POSITION(self, remaining); | |
| self->raw_pos = 0; | |
| end: | |
| res = PyLong_FromSsize_t(written); | |
| error: | |
| LEAVE_BUFFERED(self) | |
| return res; | |
| } | |
| /* | |
| * BufferedRWPair | |
| */ | |
| /* XXX The usefulness of this (compared to having two separate IO objects) is | |
| * questionable. | |
| */ | |
| typedef struct { | |
| PyObject_HEAD | |
| buffered *reader; | |
| buffered *writer; | |
| PyObject *dict; | |
| PyObject *weakreflist; | |
| } rwpair; | |
| /*[clinic input] | |
| _io.BufferedRWPair.__init__ | |
| reader: object | |
| writer: object | |
| buffer_size: Py_ssize_t(c_default="DEFAULT_BUFFER_SIZE") = DEFAULT_BUFFER_SIZE | |
| / | |
| A buffered reader and writer object together. | |
| A buffered reader object and buffered writer object put together to | |
| form a sequential IO object that can read and write. This is typically | |
| used with a socket or two-way pipe. | |
| reader and writer are RawIOBase objects that are readable and | |
| writeable respectively. If the buffer_size is omitted it defaults to | |
| DEFAULT_BUFFER_SIZE. | |
| [clinic start generated code]*/ | |
| static int | |
| _io_BufferedRWPair___init___impl(rwpair *self, PyObject *reader, | |
| PyObject *writer, Py_ssize_t buffer_size) | |
| /*[clinic end generated code: output=327e73d1aee8f984 input=620d42d71f33a031]*/ | |
| { | |
| if (_PyIOBase_check_readable(reader, Py_True) == NULL) | |
| return -1; | |
| if (_PyIOBase_check_writable(writer, Py_True) == NULL) | |
| return -1; | |
| self->reader = (buffered *) PyObject_CallFunction( | |
| (PyObject *) &PyBufferedReader_Type, "On", reader, buffer_size); | |
| if (self->reader == NULL) | |
| return -1; | |
| self->writer = (buffered *) PyObject_CallFunction( | |
| (PyObject *) &PyBufferedWriter_Type, "On", writer, buffer_size); | |
| if (self->writer == NULL) { | |
| Py_CLEAR(self->reader); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int | |
| bufferedrwpair_traverse(rwpair *self, visitproc visit, void *arg) | |
| { | |
| Py_VISIT(self->dict); | |
| return 0; | |
| } | |
| static int | |
| bufferedrwpair_clear(rwpair *self) | |
| { | |
| Py_CLEAR(self->reader); | |
| Py_CLEAR(self->writer); | |
| Py_CLEAR(self->dict); | |
| return 0; | |
| } | |
| static void | |
| bufferedrwpair_dealloc(rwpair *self) | |
| { | |
| _PyObject_GC_UNTRACK(self); | |
| if (self->weakreflist != NULL) | |
| PyObject_ClearWeakRefs((PyObject *)self); | |
| Py_CLEAR(self->reader); | |
| Py_CLEAR(self->writer); | |
| Py_CLEAR(self->dict); | |
| Py_TYPE(self)->tp_free((PyObject *) self); | |
| } | |
| static PyObject * | |
| _forward_call(buffered *self, _Py_Identifier *name, PyObject *args) | |
| { | |
| PyObject *func, *ret; | |
| if (self == NULL) { | |
| PyErr_SetString(PyExc_ValueError, | |
| "I/O operation on uninitialized object"); | |
| return NULL; | |
| } | |
| func = _PyObject_GetAttrId((PyObject *)self, name); | |
| if (func == NULL) { | |
| PyErr_SetString(PyExc_AttributeError, name->string); | |
| return NULL; | |
| } | |
| ret = PyObject_CallObject(func, args); | |
| Py_DECREF(func); | |
| return ret; | |
| } | |
| static PyObject * | |
| bufferedrwpair_read(rwpair *self, PyObject *args) | |
| { | |
| return _forward_call(self->reader, &PyId_read, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_peek(rwpair *self, PyObject *args) | |
| { | |
| return _forward_call(self->reader, &PyId_peek, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_read1(rwpair *self, PyObject *args) | |
| { | |
| return _forward_call(self->reader, &PyId_read1, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_readinto(rwpair *self, PyObject *args) | |
| { | |
| return _forward_call(self->reader, &PyId_readinto, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_readinto1(rwpair *self, PyObject *args) | |
| { | |
| return _forward_call(self->reader, &PyId_readinto1, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_write(rwpair *self, PyObject *args) | |
| { | |
| return _forward_call(self->writer, &PyId_write, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_flush(rwpair *self, PyObject *args) | |
| { | |
| return _forward_call(self->writer, &PyId_flush, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_readable(rwpair *self, PyObject *args) | |
| { | |
| return _forward_call(self->reader, &PyId_readable, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_writable(rwpair *self, PyObject *args) | |
| { | |
| return _forward_call(self->writer, &PyId_writable, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_close(rwpair *self, PyObject *args) | |
| { | |
| PyObject *exc = NULL, *val, *tb; | |
| PyObject *ret = _forward_call(self->writer, &PyId_close, args); | |
| if (ret == NULL) | |
| PyErr_Fetch(&exc, &val, &tb); | |
| else | |
| Py_DECREF(ret); | |
| ret = _forward_call(self->reader, &PyId_close, args); | |
| if (exc != NULL) { | |
| _PyErr_ChainExceptions(exc, val, tb); | |
| Py_CLEAR(ret); | |
| } | |
| return ret; | |
| } | |
| static PyObject * | |
| bufferedrwpair_isatty(rwpair *self, PyObject *args) | |
| { | |
| PyObject *ret = _forward_call(self->writer, &PyId_isatty, args); | |
| if (ret != Py_False) { | |
| /* either True or exception */ | |
| return ret; | |
| } | |
| Py_DECREF(ret); | |
| return _forward_call(self->reader, &PyId_isatty, args); | |
| } | |
| static PyObject * | |
| bufferedrwpair_closed_get(rwpair *self, void *context) | |
| { | |
| if (self->writer == NULL) { | |
| PyErr_SetString(PyExc_RuntimeError, | |
| "the BufferedRWPair object is being garbage-collected"); | |
| return NULL; | |
| } | |
| return PyObject_GetAttr((PyObject *) self->writer, _PyIO_str_closed); | |
| } | |
| /* | |
| * BufferedRandom | |
| */ | |
| /*[clinic input] | |
| _io.BufferedRandom.__init__ | |
| raw: object | |
| buffer_size: Py_ssize_t(c_default="DEFAULT_BUFFER_SIZE") = DEFAULT_BUFFER_SIZE | |
| A buffered interface to random access streams. | |
| The constructor creates a reader and writer for a seekable stream, | |
| raw, given in the first argument. If the buffer_size is omitted it | |
| defaults to DEFAULT_BUFFER_SIZE. | |
| [clinic start generated code]*/ | |
| static int | |
| _io_BufferedRandom___init___impl(buffered *self, PyObject *raw, | |
| Py_ssize_t buffer_size) | |
| /*[clinic end generated code: output=d3d64eb0f64e64a3 input=a4e818fb86d0e50c]*/ | |
| { | |
| self->ok = 0; | |
| self->detached = 0; | |
| if (_PyIOBase_check_seekable(raw, Py_True) == NULL) | |
| return -1; | |
| if (_PyIOBase_check_readable(raw, Py_True) == NULL) | |
| return -1; | |
| if (_PyIOBase_check_writable(raw, Py_True) == NULL) | |
| return -1; | |
| Py_INCREF(raw); | |
| Py_XSETREF(self->raw, raw); | |
| self->buffer_size = buffer_size; | |
| self->readable = 1; | |
| self->writable = 1; | |
| if (_buffered_init(self) < 0) | |
| return -1; | |
| _bufferedreader_reset_buf(self); | |
| _bufferedwriter_reset_buf(self); | |
| self->pos = 0; | |
| self->fast_closed_checks = (Py_TYPE(self) == &PyBufferedRandom_Type && | |
| Py_TYPE(raw) == &PyFileIO_Type); | |
| self->ok = 1; | |
| return 0; | |
| } | |
| #include "clinic/bufferedio.c.h" | |
| static PyMethodDef bufferediobase_methods[] = { | |
| _IO__BUFFEREDIOBASE_DETACH_METHODDEF | |
| {"read", bufferediobase_read, METH_VARARGS, bufferediobase_read_doc}, | |
| {"read1", bufferediobase_read1, METH_VARARGS, bufferediobase_read1_doc}, | |
| _IO__BUFFEREDIOBASE_READINTO_METHODDEF | |
| _IO__BUFFEREDIOBASE_READINTO1_METHODDEF | |
| {"write", bufferediobase_write, METH_VARARGS, bufferediobase_write_doc}, | |
| {NULL, NULL} | |
| }; | |
| PyTypeObject PyBufferedIOBase_Type = { | |
| PyVarObject_HEAD_INIT(NULL, 0) | |
| "_io._BufferedIOBase", /*tp_name*/ | |
| 0, /*tp_basicsize*/ | |
| 0, /*tp_itemsize*/ | |
| 0, /*tp_dealloc*/ | |
| 0, /*tp_print*/ | |
| 0, /*tp_getattr*/ | |
| 0, /*tp_setattr*/ | |
| 0, /*tp_compare */ | |
| 0, /*tp_repr*/ | |
| 0, /*tp_as_number*/ | |
| 0, /*tp_as_sequence*/ | |
| 0, /*tp_as_mapping*/ | |
| 0, /*tp_hash */ | |
| 0, /*tp_call*/ | |
| 0, /*tp_str*/ | |
| 0, /*tp_getattro*/ | |
| 0, /*tp_setattro*/ | |
| 0, /*tp_as_buffer*/ | |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | |
| | Py_TPFLAGS_HAVE_FINALIZE, /*tp_flags*/ | |
| bufferediobase_doc, /* tp_doc */ | |
| 0, /* tp_traverse */ | |
| 0, /* tp_clear */ | |
| 0, /* tp_richcompare */ | |
| 0, /* tp_weaklistoffset */ | |
| 0, /* tp_iter */ | |
| 0, /* tp_iternext */ | |
| bufferediobase_methods, /* tp_methods */ | |
| 0, /* tp_members */ | |
| 0, /* tp_getset */ | |
| &PyIOBase_Type, /* tp_base */ | |
| 0, /* tp_dict */ | |
| 0, /* tp_descr_get */ | |
| 0, /* tp_descr_set */ | |
| 0, /* tp_dictoffset */ | |
| 0, /* tp_init */ | |
| 0, /* tp_alloc */ | |
| 0, /* tp_new */ | |
| 0, /* tp_free */ | |
| 0, /* tp_is_gc */ | |
| 0, /* tp_bases */ | |
| 0, /* tp_mro */ | |
| 0, /* tp_cache */ | |
| 0, /* tp_subclasses */ | |
| 0, /* tp_weaklist */ | |
| 0, /* tp_del */ | |
| 0, /* tp_version_tag */ | |
| 0, /* tp_finalize */ | |
| }; | |
| static PyMethodDef bufferedreader_methods[] = { | |
| /* BufferedIOMixin methods */ | |
| {"detach", (PyCFunction)buffered_detach, METH_NOARGS}, | |
| {"flush", (PyCFunction)buffered_simple_flush, METH_NOARGS}, | |
| {"close", (PyCFunction)buffered_close, METH_NOARGS}, | |
| {"seekable", (PyCFunction)buffered_seekable, METH_NOARGS}, | |
| {"readable", (PyCFunction)buffered_readable, METH_NOARGS}, | |
| {"fileno", (PyCFunction)buffered_fileno, METH_NOARGS}, | |
| {"isatty", (PyCFunction)buffered_isatty, METH_NOARGS}, | |
| {"_dealloc_warn", (PyCFunction)buffered_dealloc_warn, METH_O}, | |
| {"__getstate__", (PyCFunction)buffered_getstate, METH_NOARGS}, | |
| _IO__BUFFERED_READ_METHODDEF | |
| _IO__BUFFERED_PEEK_METHODDEF | |
| _IO__BUFFERED_READ1_METHODDEF | |
| _IO__BUFFERED_READINTO_METHODDEF | |
| _IO__BUFFERED_READINTO1_METHODDEF | |
| _IO__BUFFERED_READLINE_METHODDEF | |
| _IO__BUFFERED_SEEK_METHODDEF | |
| {"tell", (PyCFunction)buffered_tell, METH_NOARGS}, | |
| _IO__BUFFERED_TRUNCATE_METHODDEF | |
| {"__sizeof__", (PyCFunction)buffered_sizeof, METH_NOARGS}, | |
| {NULL, NULL} | |
| }; | |
| static PyMemberDef bufferedreader_members[] = { | |
| {"raw", T_OBJECT, offsetof(buffered, raw), READONLY}, | |
| {"_finalizing", T_BOOL, offsetof(buffered, finalizing), 0}, | |
| {NULL} | |
| }; | |
| static PyGetSetDef bufferedreader_getset[] = { | |
| {"closed", (getter)buffered_closed_get, NULL, NULL}, | |
| {"name", (getter)buffered_name_get, NULL, NULL}, | |
| {"mode", (getter)buffered_mode_get, NULL, NULL}, | |
| {NULL} | |
| }; | |
| PyTypeObject PyBufferedReader_Type = { | |
| PyVarObject_HEAD_INIT(NULL, 0) | |
| "_io.BufferedReader", /*tp_name*/ | |
| sizeof(buffered), /*tp_basicsize*/ | |
| 0, /*tp_itemsize*/ | |
| (destructor)buffered_dealloc, /*tp_dealloc*/ | |
| 0, /*tp_print*/ | |
| 0, /*tp_getattr*/ | |
| 0, /*tp_setattr*/ | |
| 0, /*tp_compare */ | |
| (reprfunc)buffered_repr, /*tp_repr*/ | |
| 0, /*tp_as_number*/ | |
| 0, /*tp_as_sequence*/ | |
| 0, /*tp_as_mapping*/ | |
| 0, /*tp_hash */ | |
| 0, /*tp_call*/ | |
| 0, /*tp_str*/ | |
| 0, /*tp_getattro*/ | |
| 0, /*tp_setattro*/ | |
| 0, /*tp_as_buffer*/ | |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | |
| | Py_TPFLAGS_HAVE_GC | Py_TPFLAGS_HAVE_FINALIZE, /*tp_flags*/ | |
| _io_BufferedReader___init____doc__, /* tp_doc */ | |
| (traverseproc)buffered_traverse, /* tp_traverse */ | |
| (inquiry)buffered_clear, /* tp_clear */ | |
| 0, /* tp_richcompare */ | |
| offsetof(buffered, weakreflist), /*tp_weaklistoffset*/ | |
| 0, /* tp_iter */ | |
| (iternextfunc)buffered_iternext, /* tp_iternext */ | |
| bufferedreader_methods, /* tp_methods */ | |
| bufferedreader_members, /* tp_members */ | |
| bufferedreader_getset, /* tp_getset */ | |
| 0, /* tp_base */ | |
| 0, /* tp_dict */ | |
| 0, /* tp_descr_get */ | |
| 0, /* tp_descr_set */ | |
| offsetof(buffered, dict), /* tp_dictoffset */ | |
| _io_BufferedReader___init__, /* tp_init */ | |
| 0, /* tp_alloc */ | |
| PyType_GenericNew, /* tp_new */ | |
| 0, /* tp_free */ | |
| 0, /* tp_is_gc */ | |
| 0, /* tp_bases */ | |
| 0, /* tp_mro */ | |
| 0, /* tp_cache */ | |
| 0, /* tp_subclasses */ | |
| 0, /* tp_weaklist */ | |
| 0, /* tp_del */ | |
| 0, /* tp_version_tag */ | |
| 0, /* tp_finalize */ | |
| }; | |
| static PyMethodDef bufferedwriter_methods[] = { | |
| /* BufferedIOMixin methods */ | |
| {"close", (PyCFunction)buffered_close, METH_NOARGS}, | |
| {"detach", (PyCFunction)buffered_detach, METH_NOARGS}, | |
| {"seekable", (PyCFunction)buffered_seekable, METH_NOARGS}, | |
| {"writable", (PyCFunction)buffered_writable, METH_NOARGS}, | |
| {"fileno", (PyCFunction)buffered_fileno, METH_NOARGS}, | |
| {"isatty", (PyCFunction)buffered_isatty, METH_NOARGS}, | |
| {"_dealloc_warn", (PyCFunction)buffered_dealloc_warn, METH_O}, | |
| {"__getstate__", (PyCFunction)buffered_getstate, METH_NOARGS}, | |
| _IO_BUFFEREDWRITER_WRITE_METHODDEF | |
| _IO__BUFFERED_TRUNCATE_METHODDEF | |
| {"flush", (PyCFunction)buffered_flush, METH_NOARGS}, | |
| _IO__BUFFERED_SEEK_METHODDEF | |
| {"tell", (PyCFunction)buffered_tell, METH_NOARGS}, | |
| {"__sizeof__", (PyCFunction)buffered_sizeof, METH_NOARGS}, | |
| {NULL, NULL} | |
| }; | |
| static PyMemberDef bufferedwriter_members[] = { | |
| {"raw", T_OBJECT, offsetof(buffered, raw), READONLY}, | |
| {"_finalizing", T_BOOL, offsetof(buffered, finalizing), 0}, | |
| {NULL} | |
| }; | |
| static PyGetSetDef bufferedwriter_getset[] = { | |
| {"closed", (getter)buffered_closed_get, NULL, NULL}, | |
| {"name", (getter)buffered_name_get, NULL, NULL}, | |
| {"mode", (getter)buffered_mode_get, NULL, NULL}, | |
| {NULL} | |
| }; | |
| PyTypeObject PyBufferedWriter_Type = { | |
| PyVarObject_HEAD_INIT(NULL, 0) | |
| "_io.BufferedWriter", /*tp_name*/ | |
| sizeof(buffered), /*tp_basicsize*/ | |
| 0, /*tp_itemsize*/ | |
| (destructor)buffered_dealloc, /*tp_dealloc*/ | |
| 0, /*tp_print*/ | |
| 0, /*tp_getattr*/ | |
| 0, /*tp_setattr*/ | |
| 0, /*tp_compare */ | |
| (reprfunc)buffered_repr, /*tp_repr*/ | |
| 0, /*tp_as_number*/ | |
| 0, /*tp_as_sequence*/ | |
| 0, /*tp_as_mapping*/ | |
| 0, /*tp_hash */ | |
| 0, /*tp_call*/ | |
| 0, /*tp_str*/ | |
| 0, /*tp_getattro*/ | |
| 0, /*tp_setattro*/ | |
| 0, /*tp_as_buffer*/ | |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | |
| | Py_TPFLAGS_HAVE_GC | Py_TPFLAGS_HAVE_FINALIZE, /*tp_flags*/ | |
| _io_BufferedWriter___init____doc__, /* tp_doc */ | |
| (traverseproc)buffered_traverse, /* tp_traverse */ | |
| (inquiry)buffered_clear, /* tp_clear */ | |
| 0, /* tp_richcompare */ | |
| offsetof(buffered, weakreflist), /*tp_weaklistoffset*/ | |
| 0, /* tp_iter */ | |
| 0, /* tp_iternext */ | |
| bufferedwriter_methods, /* tp_methods */ | |
| bufferedwriter_members, /* tp_members */ | |
| bufferedwriter_getset, /* tp_getset */ | |
| 0, /* tp_base */ | |
| 0, /* tp_dict */ | |
| 0, /* tp_descr_get */ | |
| 0, /* tp_descr_set */ | |
| offsetof(buffered, dict), /* tp_dictoffset */ | |
| _io_BufferedWriter___init__, /* tp_init */ | |
| 0, /* tp_alloc */ | |
| PyType_GenericNew, /* tp_new */ | |
| 0, /* tp_free */ | |
| 0, /* tp_is_gc */ | |
| 0, /* tp_bases */ | |
| 0, /* tp_mro */ | |
| 0, /* tp_cache */ | |
| 0, /* tp_subclasses */ | |
| 0, /* tp_weaklist */ | |
| 0, /* tp_del */ | |
| 0, /* tp_version_tag */ | |
| 0, /* tp_finalize */ | |
| }; | |
| static PyMethodDef bufferedrwpair_methods[] = { | |
| {"read", (PyCFunction)bufferedrwpair_read, METH_VARARGS}, | |
| {"peek", (PyCFunction)bufferedrwpair_peek, METH_VARARGS}, | |
| {"read1", (PyCFunction)bufferedrwpair_read1, METH_VARARGS}, | |
| {"readinto", (PyCFunction)bufferedrwpair_readinto, METH_VARARGS}, | |
| {"readinto1", (PyCFunction)bufferedrwpair_readinto1, METH_VARARGS}, | |
| {"write", (PyCFunction)bufferedrwpair_write, METH_VARARGS}, | |
| {"flush", (PyCFunction)bufferedrwpair_flush, METH_NOARGS}, | |
| {"readable", (PyCFunction)bufferedrwpair_readable, METH_NOARGS}, | |
| {"writable", (PyCFunction)bufferedrwpair_writable, METH_NOARGS}, | |
| {"close", (PyCFunction)bufferedrwpair_close, METH_NOARGS}, | |
| {"isatty", (PyCFunction)bufferedrwpair_isatty, METH_NOARGS}, | |
| {"__getstate__", (PyCFunction)buffered_getstate, METH_NOARGS}, | |
| {NULL, NULL} | |
| }; | |
| static PyGetSetDef bufferedrwpair_getset[] = { | |
| {"closed", (getter)bufferedrwpair_closed_get, NULL, NULL}, | |
| {NULL} | |
| }; | |
| PyTypeObject PyBufferedRWPair_Type = { | |
| PyVarObject_HEAD_INIT(NULL, 0) | |
| "_io.BufferedRWPair", /*tp_name*/ | |
| sizeof(rwpair), /*tp_basicsize*/ | |
| 0, /*tp_itemsize*/ | |
| (destructor)bufferedrwpair_dealloc, /*tp_dealloc*/ | |
| 0, /*tp_print*/ | |
| 0, /*tp_getattr*/ | |
| 0, /*tp_setattr*/ | |
| 0, /*tp_compare */ | |
| 0, /*tp_repr*/ | |
| 0, /*tp_as_number*/ | |
| 0, /*tp_as_sequence*/ | |
| 0, /*tp_as_mapping*/ | |
| 0, /*tp_hash */ | |
| 0, /*tp_call*/ | |
| 0, /*tp_str*/ | |
| 0, /*tp_getattro*/ | |
| 0, /*tp_setattro*/ | |
| 0, /*tp_as_buffer*/ | |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | |
| | Py_TPFLAGS_HAVE_GC | Py_TPFLAGS_HAVE_FINALIZE, /* tp_flags */ | |
| _io_BufferedRWPair___init____doc__, /* tp_doc */ | |
| (traverseproc)bufferedrwpair_traverse, /* tp_traverse */ | |
| (inquiry)bufferedrwpair_clear, /* tp_clear */ | |
| 0, /* tp_richcompare */ | |
| offsetof(rwpair, weakreflist), /*tp_weaklistoffset*/ | |
| 0, /* tp_iter */ | |
| 0, /* tp_iternext */ | |
| bufferedrwpair_methods, /* tp_methods */ | |
| 0, /* tp_members */ | |
| bufferedrwpair_getset, /* tp_getset */ | |
| 0, /* tp_base */ | |
| 0, /* tp_dict */ | |
| 0, /* tp_descr_get */ | |
| 0, /* tp_descr_set */ | |
| offsetof(rwpair, dict), /* tp_dictoffset */ | |
| _io_BufferedRWPair___init__, /* tp_init */ | |
| 0, /* tp_alloc */ | |
| PyType_GenericNew, /* tp_new */ | |
| 0, /* tp_free */ | |
| 0, /* tp_is_gc */ | |
| 0, /* tp_bases */ | |
| 0, /* tp_mro */ | |
| 0, /* tp_cache */ | |
| 0, /* tp_subclasses */ | |
| 0, /* tp_weaklist */ | |
| 0, /* tp_del */ | |
| 0, /* tp_version_tag */ | |
| 0, /* tp_finalize */ | |
| }; | |
| static PyMethodDef bufferedrandom_methods[] = { | |
| /* BufferedIOMixin methods */ | |
| {"close", (PyCFunction)buffered_close, METH_NOARGS}, | |
| {"detach", (PyCFunction)buffered_detach, METH_NOARGS}, | |
| {"seekable", (PyCFunction)buffered_seekable, METH_NOARGS}, | |
| {"readable", (PyCFunction)buffered_readable, METH_NOARGS}, | |
| {"writable", (PyCFunction)buffered_writable, METH_NOARGS}, | |
| {"fileno", (PyCFunction)buffered_fileno, METH_NOARGS}, | |
| {"isatty", (PyCFunction)buffered_isatty, METH_NOARGS}, | |
| {"_dealloc_warn", (PyCFunction)buffered_dealloc_warn, METH_O}, | |
| {"__getstate__", (PyCFunction)buffered_getstate, METH_NOARGS}, | |
| {"flush", (PyCFunction)buffered_flush, METH_NOARGS}, | |
| _IO__BUFFERED_SEEK_METHODDEF | |
| {"tell", (PyCFunction)buffered_tell, METH_NOARGS}, | |
| _IO__BUFFERED_TRUNCATE_METHODDEF | |
| _IO__BUFFERED_READ_METHODDEF | |
| _IO__BUFFERED_READ1_METHODDEF | |
| _IO__BUFFERED_READINTO_METHODDEF | |
| _IO__BUFFERED_READINTO1_METHODDEF | |
| _IO__BUFFERED_READLINE_METHODDEF | |
| _IO__BUFFERED_PEEK_METHODDEF | |
| _IO_BUFFEREDWRITER_WRITE_METHODDEF | |
| {"__sizeof__", (PyCFunction)buffered_sizeof, METH_NOARGS}, | |
| {NULL, NULL} | |
| }; | |
| static PyMemberDef bufferedrandom_members[] = { | |
| {"raw", T_OBJECT, offsetof(buffered, raw), READONLY}, | |
| {"_finalizing", T_BOOL, offsetof(buffered, finalizing), 0}, | |
| {NULL} | |
| }; | |
| static PyGetSetDef bufferedrandom_getset[] = { | |
| {"closed", (getter)buffered_closed_get, NULL, NULL}, | |
| {"name", (getter)buffered_name_get, NULL, NULL}, | |
| {"mode", (getter)buffered_mode_get, NULL, NULL}, | |
| {NULL} | |
| }; | |
| PyTypeObject PyBufferedRandom_Type = { | |
| PyVarObject_HEAD_INIT(NULL, 0) | |
| "_io.BufferedRandom", /*tp_name*/ | |
| sizeof(buffered), /*tp_basicsize*/ | |
| 0, /*tp_itemsize*/ | |
| (destructor)buffered_dealloc, /*tp_dealloc*/ | |
| 0, /*tp_print*/ | |
| 0, /*tp_getattr*/ | |
| 0, /*tp_setattr*/ | |
| 0, /*tp_compare */ | |
| (reprfunc)buffered_repr, /*tp_repr*/ | |
| 0, /*tp_as_number*/ | |
| 0, /*tp_as_sequence*/ | |
| 0, /*tp_as_mapping*/ | |
| 0, /*tp_hash */ | |
| 0, /*tp_call*/ | |
| 0, /*tp_str*/ | |
| 0, /*tp_getattro*/ | |
| 0, /*tp_setattro*/ | |
| 0, /*tp_as_buffer*/ | |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | |
| | Py_TPFLAGS_HAVE_GC | Py_TPFLAGS_HAVE_FINALIZE, /*tp_flags*/ | |
| _io_BufferedRandom___init____doc__, /* tp_doc */ | |
| (traverseproc)buffered_traverse, /* tp_traverse */ | |
| (inquiry)buffered_clear, /* tp_clear */ | |
| 0, /* tp_richcompare */ | |
| offsetof(buffered, weakreflist), /*tp_weaklistoffset*/ | |
| 0, /* tp_iter */ | |
| (iternextfunc)buffered_iternext, /* tp_iternext */ | |
| bufferedrandom_methods, /* tp_methods */ | |
| bufferedrandom_members, /* tp_members */ | |
| bufferedrandom_getset, /* tp_getset */ | |
| 0, /* tp_base */ | |
| 0, /*tp_dict*/ | |
| 0, /* tp_descr_get */ | |
| 0, /* tp_descr_set */ | |
| offsetof(buffered, dict), /*tp_dictoffset*/ | |
| _io_BufferedRandom___init__, /* tp_init */ | |
| 0, /* tp_alloc */ | |
| PyType_GenericNew, /* tp_new */ | |
| 0, /* tp_free */ | |
| 0, /* tp_is_gc */ | |
| 0, /* tp_bases */ | |
| 0, /* tp_mro */ | |
| 0, /* tp_cache */ | |
| 0, /* tp_subclasses */ | |
| 0, /* tp_weaklist */ | |
| 0, /* tp_del */ | |
| 0, /* tp_version_tag */ | |
| 0, /* tp_finalize */ | |
| }; |