Modules/Setup - platform/external/python/cpython3 - Git at Google

 # -*- makefile -*-
 # The file Setup is used by the makesetup script to construct the files
 # Makefile and config.c, from Makefile.pre and config.c.in,
 # respectively.  Note that Makefile.pre is created from Makefile.pre.in
 # by the toplevel configure script.

 # (VPATH notes: Setup and Makefile.pre are in the build directory, as
 # are Makefile and config.c; the *.in files are in the source directory.)

 # Each line in this file describes one or more optional modules.
 # Modules configured here will not be compiled by the setup.py script,
 # so the file can be used to override setup.py's behavior.
 # Tag lines containing just the word "*static*", "*shared*" or "*disabled*"
 # (without the quotes but with the stars) are used to tag the following module
 # descriptions. Tag lines may alternate throughout this file.  Modules are
 # built statically when they are preceded by a "*static*" tag line or when
 # there is no tag line between the start of the file and the module
 # description.  Modules are built as a shared library when they are preceded by
 # a "*shared*" tag line.  Modules are not built at all, not by the Makefile,
 # nor by the setup.py script, when they are preceded by a "*disabled*" tag
 # line.

 # Lines have the following structure:
 #
 # <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
 #
 # <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
 # <cpparg> is anything starting with -I, -D, -U or -C
 # <library> is anything ending in .a or beginning with -l or -L
 # <module> is anything else but should be a valid Python
 # identifier (letters, digits, underscores, beginning with non-digit)
 #
 # (As the makesetup script changes, it may recognize some other
 # arguments as well, e.g. *.so and *.sl as libraries.  See the big
 # case statement in the makesetup script.)
 #
 # Lines can also have the form
 #
 # <name> = <value>
 #
 # which defines a Make variable definition inserted into Makefile.in.
 # You can also use any Make variable that is detected by configure and
 # defined in Makefile.pre.in, e.g. OpenSSL flags $(OPENSSL_INCLUDES).
 #
 # Rules generated by makesetup use additional variables:
 #
 # - All source file rules have a dependency on $(PYTHON_HEADERS) and on
 #   optional variable $(MODULES_{mod_upper}_DEPS).
 # - If no <cpparg> and no <library> arguments are given, then makesetup
 #   defaults to $(MODULES_{mod_upper}_CFLAGS) cppargs and
 #   $(MODULES_{mod_upper}_LDFLAGS) libraries. The variables are typically
 #   defined by configure.
 #
 # The build process works like this:
 #
 # 1. Build all modules that are declared as static in Modules/Setup,
 #    combine them into libpythonxy.a, combine that into python.
 # 2. Build all modules that are listed as shared in Modules/Setup.
 # 3. Invoke setup.py. That builds all modules that
 #    a) are not builtin, and
 #    b) are not listed in Modules/Setup, and
 #    c) can be build on the target
 #
 # Therefore, modules declared to be shared will not be
 # included in the config.c file, nor in the list of objects to be
 # added to the library archive, and their linker options won't be
 # added to the linker options. Rules to create their .o files and
 # their shared libraries will still be added to the Makefile, and
 # their names will be collected in the Make variable SHAREDMODS.  This
 # is used to build modules as shared libraries.  (They can be
 # installed using "make sharedinstall", which is implied by the
 # toplevel "make install" target.)  (For compatibility,
 # *noconfig* has the same effect as *shared*.)
 #
 # NOTE: As a standard policy, as many modules as can be supported by a
 # platform should be listed below.  The distribution comes with all
 # modules enabled that are supported by most platforms and don't
 # require you to download sources from elsewhere.
 #
 # NOTE: Avoid editing this file directly. Local changes should go into
 # Modules/Setup.local file. To enable all modules for testing, run
 #
 #    sed -n -E 's/^#([a-z_\*].*)$/\1/p' Modules/Setup > Modules/Setup.local


 # Some special rules to define PYTHONPATH.
 # Edit the definitions below to indicate which options you are using.
 # Don't add any whitespace or comments!

 # Directories where library files get installed.
 # DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
 DESTLIB=$(LIBDEST)
 MACHDESTLIB=$(BINLIBDEST)

 # NOTE: all the paths are now relative to the prefix that is computed
 # at run time!

 # Standard path -- don't edit.
 # No leading colon since this is the first entry.
 # Empty since this is now just the runtime prefix.
 DESTPATH=

 # Site specific path components -- should begin with : if non-empty
 SITEPATH=

 # Standard path components for test modules
 TESTPATH=

 COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)
 PYTHONPATH=$(COREPYTHONPATH)


 # ---
 # Built-in modules required to get a functioning interpreter are listed in
 # Modules/Setup.bootstrap.

 # ---
 # The rest of the modules listed in this file are all commented out by
 # default.  Usually they can be detected and built as dynamically
 # loaded modules by setup.py.  If you're on a platform that doesn't
 # support dynamic loading, want to compile modules statically into the
 # Python binary, or need to specify some odd set of compiler switches,
 # you can uncomment the appropriate lines below.

 # Uncommenting the following line tells makesetup that all following
 # modules are to be built as shared libraries (see above for more
 # detail; also note that *static* or *disabled* cancels this effect):

 #*shared*

 # Modules that should always be present (POSIX and Windows):

 #_asyncio _asynciomodule.c
 #_bisect _bisectmodule.c
 #_contextvars _contextvarsmodule.c
 #_csv _csv.c
 #_datetime _datetimemodule.c
 #_decimal _decimal/_decimal.c
 #_heapq _heapqmodule.c
 #_json _json.c
 #_lsprof _lsprof.c rotatingtree.c
 #_multiprocessing -I$(srcdir)/Modules/_multiprocessing _multiprocessing/multiprocessing.c _multiprocessing/semaphore.c
 #_opcode _opcode.c
 #_pickle _pickle.c
 #_queue _queuemodule.c
 #_random _randommodule.c
 #_socket socketmodule.c
 #_statistics _statisticsmodule.c
 #_struct _struct.c
 #_typing _typingmodule.c
 #_zoneinfo _zoneinfo.c
 #array arraymodule.c
 #audioop audioop.c
 #binascii binascii.c
 #cmath cmathmodule.c
 #math mathmodule.c
 #mmap mmapmodule.c
 #select selectmodule.c

 # XML
 #_elementtree _elementtree.c
 #pyexpat pyexpat.c

 # hashing builtins
 #_blake2 _blake2/blake2module.c _blake2/blake2b_impl.c _blake2/blake2s_impl.c
 #_md5 md5module.c
 #_sha1 sha1module.c
 #_sha256 sha256module.c
 #_sha512 sha512module.c
 #_sha3 _sha3/sha3module.c

 # text encodings and unicode
 #_codecs_cn cjkcodecs/_codecs_cn.c
 #_codecs_hk cjkcodecs/_codecs_hk.c
 #_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
 #_codecs_jp cjkcodecs/_codecs_jp.c
 #_codecs_kr cjkcodecs/_codecs_kr.c
 #_codecs_tw cjkcodecs/_codecs_tw.c
 #_multibytecodec cjkcodecs/multibytecodec.c
 #unicodedata unicodedata.c

 # Modules with some UNIX dependencies

 #_posixsubprocess _posixsubprocess.c
 #_posixshmem -I$(srcdir)/Modules/_multiprocessing _multiprocessing/posixshmem.c -lrt
 #fcntl fcntlmodule.c
 #grp grpmodule.c
 #ossaudiodev ossaudiodev.c
 #resource resource.c
 #spwd spwdmodule.c
 #syslog syslogmodule.c
 #termios termios.c

 # Modules with UNIX dependencies that require external libraries

 #_crypt _cryptmodule.c -lcrypt
 #nis nismodule.c -I/usr/include/tirpc -lnsl -ltirpc

 # Modules that require external libraries.

 #_bz2 _bz2module.c -lbz2
 #_ctypes _ctypes/_ctypes.c _ctypes/callbacks.c _ctypes/callproc.c _ctypes/stgdict.c _ctypes/cfield.c -ldl -lffi -DHAVE_FFI_PREP_CIF_VAR -DHAVE_FFI_PREP_CLOSURE_LOC -DHAVE_FFI_CLOSURE_ALLOC
 # The _dbm module supports NDBM, GDBM with compat module, and Berkeley DB.
 #_dbm _dbmmodule.c -lgdbm_compat -DUSE_GDBM_COMPAT
 #_gdbm _gdbmmodule.c -lgdbm
 #_lzma _lzmamodule.c -llzma
 #_uuid _uuidmodule.c -luuid
 #zlib  zlibmodule.c -lz

 # The readline module also supports libeditline (-leditline).
 # Some systems may require -ltermcap or -ltermlib.
 #readline readline.c -lreadline -ltermcap

 # OpenSSL bindings
 #_ssl _ssl.c $(OPENSSL_INCLUDES) $(OPENSSL_LDFLAGS) $(OPENSSL_LIBS)
 #_hashlib _hashopenssl.c $(OPENSSL_INCLUDES) $(OPENSSL_LDFLAGS) -lcrypto

 # To statically link OpenSSL:
 # _ssl _ssl.c $(OPENSSL_INCLUDES) $(OPENSSL_LDFLAGS) \
 #     -l:libssl.a -Wl,--exclude-libs,libssl.a \
 #     -l:libcrypto.a -Wl,--exclude-libs,libcrypto.a
 # _hashlib _hashopenssl.c $(OPENSSL_INCLUDES) $(OPENSSL_LDFLAGS) \
 #     -l:libcrypto.a -Wl,--exclude-libs,libcrypto.a

 # The _tkinter module.
 #
 # The command for _tkinter is long and site specific.  Please
 # uncomment and/or edit those parts as indicated.  If you don't have a
 # specific extension (e.g. Tix or BLT), leave the corresponding line
 # commented out.  (Leave the trailing backslashes in!  If you
 # experience strange errors, you may want to join all uncommented
 # lines and remove the backslashes -- the backslash interpretation is
 # done by the shell's "read" command and it may not be implemented on
 # every system.

 # *** Always uncomment this (leave the leading underscore in!):
 #_tkinter _tkinter.c tkappinit.c -DWITH_APPINIT $(TCLTK_INCLUDES) $(TCLTK_LIBS) \
 # *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
 #	-L/usr/local/lib \
 # *** Uncomment and edit to reflect where your Tcl/Tk headers are:
 #	-I/usr/local/include \
 # *** Uncomment and edit to reflect where your X11 header files are:
 #	-I/usr/X11R6/include \
 # *** Or uncomment this for Solaris:
 #	-I/usr/openwin/include \
 # *** Uncomment and edit for Tix extension only:
 #	-DWITH_TIX -ltix8.1.8.2 \
 # *** Uncomment and edit for BLT extension only:
 #	-DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
 # *** Uncomment and edit for PIL (TkImaging) extension only:
 #     (See http://www.pythonware.com/products/pil/ for more info)
 #	-DWITH_PIL -I../Extensions/Imaging/libImaging  tkImaging.c \
 # *** Uncomment and edit for TOGL extension only:
 #	-DWITH_TOGL togl.c \
 # *** Uncomment and edit to reflect where your X11 libraries are:
 #	-L/usr/X11R6/lib \
 # *** Or uncomment this for Solaris:
 #	-L/usr/openwin/lib \
 # *** Uncomment these for TOGL extension only:
 #	-lGL -lGLU -lXext -lXmu \
 # *** Uncomment for AIX:
 #	-lld \
 # *** Always uncomment this; X11 libraries to link with:
 #	-lX11

 # Some system have -lcurses
 #_curses -lncurses -lncursesw -ltermcap _cursesmodule.c
 #_curses_panel -lpanel -lncurses _curses_panel.c

 # macOS specific module, needs SystemConfiguration and CoreFoundation framework
 # _scproxy _scproxy.c

 # Examples

 #xx xxmodule.c
 #xxlimited xxlimited.c
 #xxlimited_35 xxlimited_35.c
 xxsubtype xxsubtype.c  # Required for the test suite to pass!

 # Testing

 #_xxsubinterpreters _xxsubinterpretersmodule.c
 #_xxtestfuzz _xxtestfuzz/_xxtestfuzz.c _xxtestfuzz/fuzzer.c
 #_testbuffer _testbuffer.c
 #_testinternalcapi _testinternalcapi.c

 # Some testing modules MUST be built as shared libraries.

 #*shared*
 #_ctypes_test _ctypes/_ctypes_test.c
 #_testcapi _testcapimodule.c
 #_testimportmultiple _testimportmultiple.c
 #_testmultiphase _testmultiphase.c

 # ---
 # Uncommenting the following line tells makesetup that all following modules
 # are not built (see above for more detail).
 #
 #*disabled*
 #
 # _sqlite3 _tkinter _curses pyexpat
 # _codecs_jp _codecs_kr _codecs_tw unicodedata
	# -- makefile --
	# The file Setup is used by the makesetup script to construct the files
	# Makefile and config.c, from Makefile.pre and config.c.in,
	# respectively. Note that Makefile.pre is created from Makefile.pre.in
	# by the toplevel configure script.

	# (VPATH notes: Setup and Makefile.pre are in the build directory, as
	# are Makefile and config.c; the *.in files are in the source directory.)

	# Each line in this file describes one or more optional modules.
	# Modules configured here will not be compiled by the setup.py script,
	# so the file can be used to override setup.py's behavior.
	# Tag lines containing just the word "static", "shared" or "disabled"
	# (without the quotes but with the stars) are used to tag the following module
	# descriptions. Tag lines may alternate throughout this file. Modules are
	# built statically when they are preceded by a "static" tag line or when
	# there is no tag line between the start of the file and the module
	# description. Modules are built as a shared library when they are preceded by
	# a "shared" tag line. Modules are not built at all, not by the Makefile,
	# nor by the setup.py script, when they are preceded by a "disabled" tag
	# line.

	# Lines have the following structure:
	#
	# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
	#
	# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
	# <cpparg> is anything starting with -I, -D, -U or -C
	# <library> is anything ending in .a or beginning with -l or -L
	# <module> is anything else but should be a valid Python
	# identifier (letters, digits, underscores, beginning with non-digit)
	#
	# (As the makesetup script changes, it may recognize some other
	# arguments as well, e.g. .so and .sl as libraries. See the big
	# case statement in the makesetup script.)
	#
	# Lines can also have the form
	#
	# <name> = <value>
	#
	# which defines a Make variable definition inserted into Makefile.in.
	# You can also use any Make variable that is detected by configure and
	# defined in Makefile.pre.in, e.g. OpenSSL flags $(OPENSSL_INCLUDES).
	#
	# Rules generated by makesetup use additional variables:
	#
	# - All source file rules have a dependency on $(PYTHON_HEADERS) and on
	# optional variable $(MODULES_{mod_upper}_DEPS).
	# - If no <cpparg> and no <library> arguments are given, then makesetup
	# defaults to $(MODULES_{mod_upper}_CFLAGS) cppargs and
	# $(MODULES_{mod_upper}_LDFLAGS) libraries. The variables are typically
	# defined by configure.
	#
	# The build process works like this:
	#
	# 1. Build all modules that are declared as static in Modules/Setup,
	# combine them into libpythonxy.a, combine that into python.
	# 2. Build all modules that are listed as shared in Modules/Setup.
	# 3. Invoke setup.py. That builds all modules that
	# a) are not builtin, and
	# b) are not listed in Modules/Setup, and
	# c) can be build on the target
	#
	# Therefore, modules declared to be shared will not be
	# included in the config.c file, nor in the list of objects to be
	# added to the library archive, and their linker options won't be
	# added to the linker options. Rules to create their .o files and
	# their shared libraries will still be added to the Makefile, and
	# their names will be collected in the Make variable SHAREDMODS. This
	# is used to build modules as shared libraries. (They can be
	# installed using "make sharedinstall", which is implied by the
	# toplevel "make install" target.) (For compatibility,
	# noconfig has the same effect as shared.)
	#
	# NOTE: As a standard policy, as many modules as can be supported by a
	# platform should be listed below. The distribution comes with all
	# modules enabled that are supported by most platforms and don't
	# require you to download sources from elsewhere.
	#
	# NOTE: Avoid editing this file directly. Local changes should go into
	# Modules/Setup.local file. To enable all modules for testing, run
	#
	# sed -n -E 's/^#([a-z_\].)$/\1/p' Modules/Setup > Modules/Setup.local


	# Some special rules to define PYTHONPATH.
	# Edit the definitions below to indicate which options you are using.
	# Don't add any whitespace or comments!

	# Directories where library files get installed.
	# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
	DESTLIB=$(LIBDEST)
	MACHDESTLIB=$(BINLIBDEST)

	# NOTE: all the paths are now relative to the prefix that is computed
	# at run time!

	# Standard path -- don't edit.
	# No leading colon since this is the first entry.
	# Empty since this is now just the runtime prefix.
	DESTPATH=

	# Site specific path components -- should begin with : if non-empty
	SITEPATH=

	# Standard path components for test modules
	TESTPATH=

	COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)
	PYTHONPATH=$(COREPYTHONPATH)


	# ---
	# Built-in modules required to get a functioning interpreter are listed in
	# Modules/Setup.bootstrap.

	# ---
	# The rest of the modules listed in this file are all commented out by
	# default. Usually they can be detected and built as dynamically
	# loaded modules by setup.py. If you're on a platform that doesn't
	# support dynamic loading, want to compile modules statically into the
	# Python binary, or need to specify some odd set of compiler switches,
	# you can uncomment the appropriate lines below.

	# Uncommenting the following line tells makesetup that all following
	# modules are to be built as shared libraries (see above for more
	# detail; also note that static or disabled cancels this effect):

	#shared

	# Modules that should always be present (POSIX and Windows):

	#_asyncio _asynciomodule.c
	#_bisect _bisectmodule.c
	#_contextvars _contextvarsmodule.c
	#_csv _csv.c
	#_datetime _datetimemodule.c
	#_decimal _decimal/_decimal.c
	#_heapq _heapqmodule.c
	#_json _json.c
	#_lsprof _lsprof.c rotatingtree.c
	#_multiprocessing -I$(srcdir)/Modules/_multiprocessing _multiprocessing/multiprocessing.c _multiprocessing/semaphore.c
	#_opcode _opcode.c
	#_pickle _pickle.c
	#_queue _queuemodule.c
	#_random _randommodule.c
	#_socket socketmodule.c
	#_statistics _statisticsmodule.c
	#_struct _struct.c
	#_typing _typingmodule.c
	#_zoneinfo _zoneinfo.c
	#array arraymodule.c
	#audioop audioop.c
	#binascii binascii.c
	#cmath cmathmodule.c
	#math mathmodule.c
	#mmap mmapmodule.c
	#select selectmodule.c

	# XML
	#_elementtree _elementtree.c
	#pyexpat pyexpat.c

	# hashing builtins
	#_blake2 _blake2/blake2module.c _blake2/blake2b_impl.c _blake2/blake2s_impl.c
	#_md5 md5module.c
	#_sha1 sha1module.c
	#_sha256 sha256module.c
	#_sha512 sha512module.c
	#_sha3 _sha3/sha3module.c

	# text encodings and unicode
	#_codecs_cn cjkcodecs/_codecs_cn.c
	#_codecs_hk cjkcodecs/_codecs_hk.c
	#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
	#_codecs_jp cjkcodecs/_codecs_jp.c
	#_codecs_kr cjkcodecs/_codecs_kr.c
	#_codecs_tw cjkcodecs/_codecs_tw.c
	#_multibytecodec cjkcodecs/multibytecodec.c
	#unicodedata unicodedata.c

	# Modules with some UNIX dependencies

	#_posixsubprocess _posixsubprocess.c
	#_posixshmem -I$(srcdir)/Modules/_multiprocessing _multiprocessing/posixshmem.c -lrt
	#fcntl fcntlmodule.c
	#grp grpmodule.c
	#ossaudiodev ossaudiodev.c
	#resource resource.c
	#spwd spwdmodule.c
	#syslog syslogmodule.c
	#termios termios.c

	# Modules with UNIX dependencies that require external libraries

	#_crypt _cryptmodule.c -lcrypt
	#nis nismodule.c -I/usr/include/tirpc -lnsl -ltirpc

	# Modules that require external libraries.

	#_bz2 _bz2module.c -lbz2
	#_ctypes _ctypes/_ctypes.c _ctypes/callbacks.c _ctypes/callproc.c _ctypes/stgdict.c _ctypes/cfield.c -ldl -lffi -DHAVE_FFI_PREP_CIF_VAR -DHAVE_FFI_PREP_CLOSURE_LOC -DHAVE_FFI_CLOSURE_ALLOC
	# The _dbm module supports NDBM, GDBM with compat module, and Berkeley DB.
	#_dbm _dbmmodule.c -lgdbm_compat -DUSE_GDBM_COMPAT
	#_gdbm _gdbmmodule.c -lgdbm
	#_lzma _lzmamodule.c -llzma
	#_uuid _uuidmodule.c -luuid
	#zlib zlibmodule.c -lz

	# The readline module also supports libeditline (-leditline).
	# Some systems may require -ltermcap or -ltermlib.
	#readline readline.c -lreadline -ltermcap

	# OpenSSL bindings
	#_ssl _ssl.c $(OPENSSL_INCLUDES) $(OPENSSL_LDFLAGS) $(OPENSSL_LIBS)
	#_hashlib _hashopenssl.c $(OPENSSL_INCLUDES) $(OPENSSL_LDFLAGS) -lcrypto

	# To statically link OpenSSL:
	# _ssl _ssl.c $(OPENSSL_INCLUDES) $(OPENSSL_LDFLAGS) \
	# -l:libssl.a -Wl,--exclude-libs,libssl.a \
	# -l:libcrypto.a -Wl,--exclude-libs,libcrypto.a
	# _hashlib _hashopenssl.c $(OPENSSL_INCLUDES) $(OPENSSL_LDFLAGS) \
	# -l:libcrypto.a -Wl,--exclude-libs,libcrypto.a

	# The _tkinter module.
	#
	# The command for _tkinter is long and site specific. Please
	# uncomment and/or edit those parts as indicated. If you don't have a
	# specific extension (e.g. Tix or BLT), leave the corresponding line
	# commented out. (Leave the trailing backslashes in! If you
	# experience strange errors, you may want to join all uncommented
	# lines and remove the backslashes -- the backslash interpretation is
	# done by the shell's "read" command and it may not be implemented on
	# every system.

	# *** Always uncomment this (leave the leading underscore in!):
	#_tkinter _tkinter.c tkappinit.c -DWITH_APPINIT $(TCLTK_INCLUDES) $(TCLTK_LIBS) \
	# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
	# -L/usr/local/lib \
	# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
	# -I/usr/local/include \
	# *** Uncomment and edit to reflect where your X11 header files are:
	# -I/usr/X11R6/include \
	# *** Or uncomment this for Solaris:
	# -I/usr/openwin/include \
	# *** Uncomment and edit for Tix extension only:
	# -DWITH_TIX -ltix8.1.8.2 \
	# *** Uncomment and edit for BLT extension only:
	# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
	# *** Uncomment and edit for PIL (TkImaging) extension only:
	# (See http://www.pythonware.com/products/pil/ for more info)
	# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
	# *** Uncomment and edit for TOGL extension only:
	# -DWITH_TOGL togl.c \
	# *** Uncomment and edit to reflect where your X11 libraries are:
	# -L/usr/X11R6/lib \
	# *** Or uncomment this for Solaris:
	# -L/usr/openwin/lib \
	# *** Uncomment these for TOGL extension only:
	# -lGL -lGLU -lXext -lXmu \
	# *** Uncomment for AIX:
	# -lld \
	# *** Always uncomment this; X11 libraries to link with:
	# -lX11

	# Some system have -lcurses
	#_curses -lncurses -lncursesw -ltermcap _cursesmodule.c
	#_curses_panel -lpanel -lncurses _curses_panel.c

	# macOS specific module, needs SystemConfiguration and CoreFoundation framework
	# _scproxy _scproxy.c

	# Examples

	#xx xxmodule.c
	#xxlimited xxlimited.c
	#xxlimited_35 xxlimited_35.c
	xxsubtype xxsubtype.c # Required for the test suite to pass!

	# Testing

	#_xxsubinterpreters _xxsubinterpretersmodule.c
	#_xxtestfuzz _xxtestfuzz/_xxtestfuzz.c _xxtestfuzz/fuzzer.c
	#_testbuffer _testbuffer.c
	#_testinternalcapi _testinternalcapi.c

	# Some testing modules MUST be built as shared libraries.

	#shared
	#_ctypes_test _ctypes/_ctypes_test.c
	#_testcapi _testcapimodule.c
	#_testimportmultiple _testimportmultiple.c
	#_testmultiphase _testmultiphase.c

	# ---
	# Uncommenting the following line tells makesetup that all following modules
	# are not built (see above for more detail).
	#
	#disabled
	#
	# _sqlite3 _tkinter _curses pyexpat
	# _codecs_jp _codecs_kr _codecs_tw unicodedata