| /* SSL socket module | |
| SSL support based on patches by Brian E Gallew and Laszlo Kovacs. | |
| Re-worked a bit by Bill Janssen to add server-side support and | |
| certificate decoding. Chris Stawarz contributed some non-blocking | |
| patches. | |
| This module is imported by ssl.py. It should *not* be used | |
| directly. | |
| XXX should partial writes be enabled, SSL_MODE_ENABLE_PARTIAL_WRITE? | |
| XXX integrate several "shutdown modes" as suggested in | |
| http://bugs.python.org/issue8108#msg102867 ? | |
| */ | |
| #define PY_SSIZE_T_CLEAN | |
| #include "Python.h" | |
| #ifdef WITH_THREAD | |
| #include "pythread.h" | |
| #define PySSL_BEGIN_ALLOW_THREADS_S(save) \ | |
| do { if (_ssl_locks_count>0) { (save) = PyEval_SaveThread(); } } while (0) | |
| #define PySSL_END_ALLOW_THREADS_S(save) \ | |
| do { if (_ssl_locks_count>0) { PyEval_RestoreThread(save); } } while (0) | |
| #define PySSL_BEGIN_ALLOW_THREADS { \ | |
| PyThreadState *_save = NULL; \ | |
| PySSL_BEGIN_ALLOW_THREADS_S(_save); | |
| #define PySSL_BLOCK_THREADS PySSL_END_ALLOW_THREADS_S(_save); | |
| #define PySSL_UNBLOCK_THREADS PySSL_BEGIN_ALLOW_THREADS_S(_save); | |
| #define PySSL_END_ALLOW_THREADS PySSL_END_ALLOW_THREADS_S(_save); } | |
| #else /* no WITH_THREAD */ | |
| #define PySSL_BEGIN_ALLOW_THREADS_S(save) | |
| #define PySSL_END_ALLOW_THREADS_S(save) | |
| #define PySSL_BEGIN_ALLOW_THREADS | |
| #define PySSL_BLOCK_THREADS | |
| #define PySSL_UNBLOCK_THREADS | |
| #define PySSL_END_ALLOW_THREADS | |
| #endif | |
| /* Include symbols from _socket module */ | |
| #include "socketmodule.h" | |
| #if defined(HAVE_POLL_H) | |
| #include <poll.h> | |
| #elif defined(HAVE_SYS_POLL_H) | |
| #include <sys/poll.h> | |
| #endif | |
| /* Don't warn about deprecated functions */ | |
| #ifdef __GNUC__ | |
| #pragma GCC diagnostic ignored "-Wdeprecated-declarations" | |
| #endif | |
| #ifdef __clang__ | |
| #pragma clang diagnostic ignored "-Wdeprecated-declarations" | |
| #endif | |
| /* Include OpenSSL header files */ | |
| #include "openssl/rsa.h" | |
| #include "openssl/crypto.h" | |
| #include "openssl/x509.h" | |
| #include "openssl/x509v3.h" | |
| #include "openssl/pem.h" | |
| #include "openssl/ssl.h" | |
| #include "openssl/err.h" | |
| #include "openssl/rand.h" | |
| /* SSL error object */ | |
| static PyObject *PySSLErrorObject; | |
| static PyObject *PySSLZeroReturnErrorObject; | |
| static PyObject *PySSLWantReadErrorObject; | |
| static PyObject *PySSLWantWriteErrorObject; | |
| static PyObject *PySSLSyscallErrorObject; | |
| static PyObject *PySSLEOFErrorObject; | |
| /* Error mappings */ | |
| static PyObject *err_codes_to_names; | |
| static PyObject *err_names_to_codes; | |
| static PyObject *lib_codes_to_names; | |
| struct py_ssl_error_code { | |
| const char *mnemonic; | |
| int library, reason; | |
| }; | |
| struct py_ssl_library_code { | |
| const char *library; | |
| int code; | |
| }; | |
| /* Include generated data (error codes) */ | |
| #include "_ssl_data.h" | |
| #if (OPENSSL_VERSION_NUMBER >= 0x10100000L) && !defined(LIBRESSL_VERSION_NUMBER) | |
| # define OPENSSL_VERSION_1_1 1 | |
| #endif | |
| /* Openssl comes with TLSv1.1 and TLSv1.2 between 1.0.0h and 1.0.1 | |
| http://www.openssl.org/news/changelog.html | |
| */ | |
| #if OPENSSL_VERSION_NUMBER >= 0x10001000L | |
| # define HAVE_TLSv1_2 1 | |
| #else | |
| # define HAVE_TLSv1_2 0 | |
| #endif | |
| /* SNI support (client- and server-side) appeared in OpenSSL 1.0.0 and 0.9.8f | |
| * This includes the SSL_set_SSL_CTX() function. | |
| */ | |
| #ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME | |
| # define HAVE_SNI 1 | |
| #else | |
| # define HAVE_SNI 0 | |
| #endif | |
| /* ALPN added in OpenSSL 1.0.2 */ | |
| #if !defined(LIBRESSL_VERSION_NUMBER) && OPENSSL_VERSION_NUMBER >= 0x1000200fL && !defined(OPENSSL_NO_TLSEXT) | |
| # define HAVE_ALPN | |
| #endif | |
| #ifndef INVALID_SOCKET /* MS defines this */ | |
| #define INVALID_SOCKET (-1) | |
| #endif | |
| #ifdef OPENSSL_VERSION_1_1 | |
| /* OpenSSL 1.1.0+ */ | |
| #ifndef OPENSSL_NO_SSL2 | |
| #define OPENSSL_NO_SSL2 | |
| #endif | |
| #else /* OpenSSL < 1.1.0 */ | |
| #if defined(WITH_THREAD) | |
| #define HAVE_OPENSSL_CRYPTO_LOCK | |
| #endif | |
| #define TLS_method SSLv23_method | |
| static int X509_NAME_ENTRY_set(const X509_NAME_ENTRY *ne) | |
| { | |
| return ne->set; | |
| } | |
| #ifndef OPENSSL_NO_COMP | |
| static int COMP_get_type(const COMP_METHOD *meth) | |
| { | |
| return meth->type; | |
| } | |
| #endif | |
| static pem_password_cb *SSL_CTX_get_default_passwd_cb(SSL_CTX *ctx) | |
| { | |
| return ctx->default_passwd_callback; | |
| } | |
| static void *SSL_CTX_get_default_passwd_cb_userdata(SSL_CTX *ctx) | |
| { | |
| return ctx->default_passwd_callback_userdata; | |
| } | |
| static int X509_OBJECT_get_type(X509_OBJECT *x) | |
| { | |
| return x->type; | |
| } | |
| static X509 *X509_OBJECT_get0_X509(X509_OBJECT *x) | |
| { | |
| return x->data.x509; | |
| } | |
| static STACK_OF(X509_OBJECT) *X509_STORE_get0_objects(X509_STORE *store) { | |
| return store->objs; | |
| } | |
| static X509_VERIFY_PARAM *X509_STORE_get0_param(X509_STORE *store) | |
| { | |
| return store->param; | |
| } | |
| #endif /* OpenSSL < 1.1.0 or LibreSSL */ | |
| enum py_ssl_error { | |
| /* these mirror ssl.h */ | |
| PY_SSL_ERROR_NONE, | |
| PY_SSL_ERROR_SSL, | |
| PY_SSL_ERROR_WANT_READ, | |
| PY_SSL_ERROR_WANT_WRITE, | |
| PY_SSL_ERROR_WANT_X509_LOOKUP, | |
| PY_SSL_ERROR_SYSCALL, /* look at error stack/return value/errno */ | |
| PY_SSL_ERROR_ZERO_RETURN, | |
| PY_SSL_ERROR_WANT_CONNECT, | |
| /* start of non ssl.h errorcodes */ | |
| PY_SSL_ERROR_EOF, /* special case of SSL_ERROR_SYSCALL */ | |
| PY_SSL_ERROR_NO_SOCKET, /* socket has been GC'd */ | |
| PY_SSL_ERROR_INVALID_ERROR_CODE | |
| }; | |
| enum py_ssl_server_or_client { | |
| PY_SSL_CLIENT, | |
| PY_SSL_SERVER | |
| }; | |
| enum py_ssl_cert_requirements { | |
| PY_SSL_CERT_NONE, | |
| PY_SSL_CERT_OPTIONAL, | |
| PY_SSL_CERT_REQUIRED | |
| }; | |
| enum py_ssl_version { | |
| PY_SSL_VERSION_SSL2, | |
| PY_SSL_VERSION_SSL3=1, | |
| PY_SSL_VERSION_TLS, | |
| #if HAVE_TLSv1_2 | |
| PY_SSL_VERSION_TLS1, | |
| PY_SSL_VERSION_TLS1_1, | |
| PY_SSL_VERSION_TLS1_2 | |
| #else | |
| PY_SSL_VERSION_TLS1 | |
| #endif | |
| }; | |
| #ifdef WITH_THREAD | |
| /* serves as a flag to see whether we've initialized the SSL thread support. */ | |
| /* 0 means no, greater than 0 means yes */ | |
| static unsigned int _ssl_locks_count = 0; | |
| #endif /* def WITH_THREAD */ | |
| /* SSL socket object */ | |
| #define X509_NAME_MAXLEN 256 | |
| /* RAND_* APIs got added to OpenSSL in 0.9.5 */ | |
| #if OPENSSL_VERSION_NUMBER >= 0x0090500fL | |
| # define HAVE_OPENSSL_RAND 1 | |
| #else | |
| # undef HAVE_OPENSSL_RAND | |
| #endif | |
| /* SSL_CTX_clear_options() and SSL_clear_options() were first added in | |
| * OpenSSL 0.9.8m but do not appear in some 0.9.9-dev versions such the | |
| * 0.9.9 from "May 2008" that NetBSD 5.0 uses. */ | |
| #if OPENSSL_VERSION_NUMBER >= 0x009080dfL && OPENSSL_VERSION_NUMBER != 0x00909000L | |
| # define HAVE_SSL_CTX_CLEAR_OPTIONS | |
| #else | |
| # undef HAVE_SSL_CTX_CLEAR_OPTIONS | |
| #endif | |
| /* In case of 'tls-unique' it will be 12 bytes for TLS, 36 bytes for | |
| * older SSL, but let's be safe */ | |
| #define PySSL_CB_MAXLEN 128 | |
| /* SSL_get_finished got added to OpenSSL in 0.9.5 */ | |
| #if OPENSSL_VERSION_NUMBER >= 0x0090500fL | |
| # define HAVE_OPENSSL_FINISHED 1 | |
| #else | |
| # define HAVE_OPENSSL_FINISHED 0 | |
| #endif | |
| /* ECDH support got added to OpenSSL in 0.9.8 */ | |
| #if OPENSSL_VERSION_NUMBER < 0x0090800fL && !defined(OPENSSL_NO_ECDH) | |
| # define OPENSSL_NO_ECDH | |
| #endif | |
| /* compression support got added to OpenSSL in 0.9.8 */ | |
| #if OPENSSL_VERSION_NUMBER < 0x0090800fL && !defined(OPENSSL_NO_COMP) | |
| # define OPENSSL_NO_COMP | |
| #endif | |
| /* X509_VERIFY_PARAM got added to OpenSSL in 0.9.8 */ | |
| #if OPENSSL_VERSION_NUMBER >= 0x0090800fL | |
| # define HAVE_OPENSSL_VERIFY_PARAM | |
| #endif | |
| typedef struct { | |
| PyObject_HEAD | |
| SSL_CTX *ctx; | |
| #ifdef OPENSSL_NPN_NEGOTIATED | |
| unsigned char *npn_protocols; | |
| int npn_protocols_len; | |
| #endif | |
| #ifdef HAVE_ALPN | |
| unsigned char *alpn_protocols; | |
| int alpn_protocols_len; | |
| #endif | |
| #ifndef OPENSSL_NO_TLSEXT | |
| PyObject *set_hostname; | |
| #endif | |
| int check_hostname; | |
| } PySSLContext; | |
| typedef struct { | |
| PyObject_HEAD | |
| PySocketSockObject *Socket; | |
| PyObject *ssl_sock; | |
| SSL *ssl; | |
| PySSLContext *ctx; /* weakref to SSL context */ | |
| X509 *peer_cert; | |
| char shutdown_seen_zero; | |
| char handshake_done; | |
| enum py_ssl_server_or_client socket_type; | |
| } PySSLSocket; | |
| static PyTypeObject PySSLContext_Type; | |
| static PyTypeObject PySSLSocket_Type; | |
| static PyObject *PySSL_SSLwrite(PySSLSocket *self, PyObject *args); | |
| static PyObject *PySSL_SSLread(PySSLSocket *self, PyObject *args); | |
| static int check_socket_and_wait_for_timeout(PySocketSockObject *s, | |
| int writing); | |
| static PyObject *PySSL_peercert(PySSLSocket *self, PyObject *args); | |
| static PyObject *PySSL_cipher(PySSLSocket *self); | |
| #define PySSLContext_Check(v) (Py_TYPE(v) == &PySSLContext_Type) | |
| #define PySSLSocket_Check(v) (Py_TYPE(v) == &PySSLSocket_Type) | |
| typedef enum { | |
| SOCKET_IS_NONBLOCKING, | |
| SOCKET_IS_BLOCKING, | |
| SOCKET_HAS_TIMED_OUT, | |
| SOCKET_HAS_BEEN_CLOSED, | |
| SOCKET_TOO_LARGE_FOR_SELECT, | |
| SOCKET_OPERATION_OK | |
| } timeout_state; | |
| /* Wrap error strings with filename and line # */ | |
| #define STRINGIFY1(x) #x | |
| #define STRINGIFY2(x) STRINGIFY1(x) | |
| #define ERRSTR1(x,y,z) (x ":" y ": " z) | |
| #define ERRSTR(x) ERRSTR1("_ssl.c", STRINGIFY2(__LINE__), x) | |
| /* | |
| * SSL errors. | |
| */ | |
| PyDoc_STRVAR(SSLError_doc, | |
| "An error occurred in the SSL implementation."); | |
| PyDoc_STRVAR(SSLZeroReturnError_doc, | |
| "SSL/TLS session closed cleanly."); | |
| PyDoc_STRVAR(SSLWantReadError_doc, | |
| "Non-blocking SSL socket needs to read more data\n" | |
| "before the requested operation can be completed."); | |
| PyDoc_STRVAR(SSLWantWriteError_doc, | |
| "Non-blocking SSL socket needs to write more data\n" | |
| "before the requested operation can be completed."); | |
| PyDoc_STRVAR(SSLSyscallError_doc, | |
| "System error when attempting SSL operation."); | |
| PyDoc_STRVAR(SSLEOFError_doc, | |
| "SSL/TLS connection terminated abruptly."); | |
| static PyObject * | |
| SSLError_str(PyEnvironmentErrorObject *self) | |
| { | |
| if (self->strerror != NULL) { | |
| Py_INCREF(self->strerror); | |
| return self->strerror; | |
| } | |
| else | |
| return PyObject_Str(self->args); | |
| } | |
| static void | |
| fill_and_set_sslerror(PyObject *type, int ssl_errno, const char *errstr, | |
| int lineno, unsigned long errcode) | |
| { | |
| PyObject *err_value = NULL, *reason_obj = NULL, *lib_obj = NULL; | |
| PyObject *init_value, *msg, *key; | |
| if (errcode != 0) { | |
| int lib, reason; | |
| lib = ERR_GET_LIB(errcode); | |
| reason = ERR_GET_REASON(errcode); | |
| key = Py_BuildValue("ii", lib, reason); | |
| if (key == NULL) | |
| goto fail; | |
| reason_obj = PyDict_GetItem(err_codes_to_names, key); | |
| Py_DECREF(key); | |
| if (reason_obj == NULL) { | |
| /* XXX if reason < 100, it might reflect a library number (!!) */ | |
| PyErr_Clear(); | |
| } | |
| key = PyLong_FromLong(lib); | |
| if (key == NULL) | |
| goto fail; | |
| lib_obj = PyDict_GetItem(lib_codes_to_names, key); | |
| Py_DECREF(key); | |
| if (lib_obj == NULL) { | |
| PyErr_Clear(); | |
| } | |
| if (errstr == NULL) | |
| errstr = ERR_reason_error_string(errcode); | |
| } | |
| if (errstr == NULL) | |
| errstr = "unknown error"; | |
| if (reason_obj && lib_obj) | |
| msg = PyUnicode_FromFormat("[%S: %S] %s (_ssl.c:%d)", | |
| lib_obj, reason_obj, errstr, lineno); | |
| else if (lib_obj) | |
| msg = PyUnicode_FromFormat("[%S] %s (_ssl.c:%d)", | |
| lib_obj, errstr, lineno); | |
| else | |
| msg = PyUnicode_FromFormat("%s (_ssl.c:%d)", errstr, lineno); | |
| if (msg == NULL) | |
| goto fail; | |
| init_value = Py_BuildValue("iN", ssl_errno, msg); | |
| if (init_value == NULL) | |
| goto fail; | |
| err_value = PyObject_CallObject(type, init_value); | |
| Py_DECREF(init_value); | |
| if (err_value == NULL) | |
| goto fail; | |
| if (reason_obj == NULL) | |
| reason_obj = Py_None; | |
| if (PyObject_SetAttrString(err_value, "reason", reason_obj)) | |
| goto fail; | |
| if (lib_obj == NULL) | |
| lib_obj = Py_None; | |
| if (PyObject_SetAttrString(err_value, "library", lib_obj)) | |
| goto fail; | |
| PyErr_SetObject(type, err_value); | |
| fail: | |
| Py_XDECREF(err_value); | |
| } | |
| static PyObject * | |
| PySSL_SetError(PySSLSocket *obj, int ret, char *filename, int lineno) | |
| { | |
| PyObject *type = PySSLErrorObject; | |
| char *errstr = NULL; | |
| int err; | |
| enum py_ssl_error p = PY_SSL_ERROR_NONE; | |
| unsigned long e = 0; | |
| assert(ret <= 0); | |
| e = ERR_peek_last_error(); | |
| if (obj->ssl != NULL) { | |
| err = SSL_get_error(obj->ssl, ret); | |
| switch (err) { | |
| case SSL_ERROR_ZERO_RETURN: | |
| errstr = "TLS/SSL connection has been closed (EOF)"; | |
| type = PySSLZeroReturnErrorObject; | |
| p = PY_SSL_ERROR_ZERO_RETURN; | |
| break; | |
| case SSL_ERROR_WANT_READ: | |
| errstr = "The operation did not complete (read)"; | |
| type = PySSLWantReadErrorObject; | |
| p = PY_SSL_ERROR_WANT_READ; | |
| break; | |
| case SSL_ERROR_WANT_WRITE: | |
| p = PY_SSL_ERROR_WANT_WRITE; | |
| type = PySSLWantWriteErrorObject; | |
| errstr = "The operation did not complete (write)"; | |
| break; | |
| case SSL_ERROR_WANT_X509_LOOKUP: | |
| p = PY_SSL_ERROR_WANT_X509_LOOKUP; | |
| errstr = "The operation did not complete (X509 lookup)"; | |
| break; | |
| case SSL_ERROR_WANT_CONNECT: | |
| p = PY_SSL_ERROR_WANT_CONNECT; | |
| errstr = "The operation did not complete (connect)"; | |
| break; | |
| case SSL_ERROR_SYSCALL: | |
| { | |
| if (e == 0) { | |
| PySocketSockObject *s = obj->Socket; | |
| if (ret == 0) { | |
| p = PY_SSL_ERROR_EOF; | |
| type = PySSLEOFErrorObject; | |
| errstr = "EOF occurred in violation of protocol"; | |
| } else if (ret == -1) { | |
| /* underlying BIO reported an I/O error */ | |
| Py_INCREF(s); | |
| ERR_clear_error(); | |
| s->errorhandler(); | |
| Py_DECREF(s); | |
| return NULL; | |
| } else { /* possible? */ | |
| p = PY_SSL_ERROR_SYSCALL; | |
| type = PySSLSyscallErrorObject; | |
| errstr = "Some I/O error occurred"; | |
| } | |
| } else { | |
| p = PY_SSL_ERROR_SYSCALL; | |
| } | |
| break; | |
| } | |
| case SSL_ERROR_SSL: | |
| { | |
| p = PY_SSL_ERROR_SSL; | |
| if (e == 0) | |
| /* possible? */ | |
| errstr = "A failure in the SSL library occurred"; | |
| break; | |
| } | |
| default: | |
| p = PY_SSL_ERROR_INVALID_ERROR_CODE; | |
| errstr = "Invalid error code"; | |
| } | |
| } | |
| fill_and_set_sslerror(type, p, errstr, lineno, e); | |
| ERR_clear_error(); | |
| return NULL; | |
| } | |
| static PyObject * | |
| _setSSLError (char *errstr, int errcode, char *filename, int lineno) { | |
| if (errstr == NULL) | |
| errcode = ERR_peek_last_error(); | |
| else | |
| errcode = 0; | |
| fill_and_set_sslerror(PySSLErrorObject, errcode, errstr, lineno, errcode); | |
| ERR_clear_error(); | |
| return NULL; | |
| } | |
| /* | |
| * SSL objects | |
| */ | |
| static PySSLSocket * | |
| newPySSLSocket(PySSLContext *sslctx, PySocketSockObject *sock, | |
| enum py_ssl_server_or_client socket_type, | |
| char *server_hostname, PyObject *ssl_sock) | |
| { | |
| PySSLSocket *self; | |
| SSL_CTX *ctx = sslctx->ctx; | |
| long mode; | |
| self = PyObject_New(PySSLSocket, &PySSLSocket_Type); | |
| if (self == NULL) | |
| return NULL; | |
| self->peer_cert = NULL; | |
| self->ssl = NULL; | |
| self->Socket = NULL; | |
| self->ssl_sock = NULL; | |
| self->ctx = sslctx; | |
| self->shutdown_seen_zero = 0; | |
| self->handshake_done = 0; | |
| Py_INCREF(sslctx); | |
| /* Make sure the SSL error state is initialized */ | |
| (void) ERR_get_state(); | |
| ERR_clear_error(); | |
| PySSL_BEGIN_ALLOW_THREADS | |
| self->ssl = SSL_new(ctx); | |
| PySSL_END_ALLOW_THREADS | |
| SSL_set_app_data(self->ssl,self); | |
| SSL_set_fd(self->ssl, Py_SAFE_DOWNCAST(sock->sock_fd, SOCKET_T, int)); | |
| mode = SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER; | |
| #ifdef SSL_MODE_AUTO_RETRY | |
| mode |= SSL_MODE_AUTO_RETRY; | |
| #endif | |
| SSL_set_mode(self->ssl, mode); | |
| #if HAVE_SNI | |
| if (server_hostname != NULL) | |
| SSL_set_tlsext_host_name(self->ssl, server_hostname); | |
| #endif | |
| /* If the socket is in non-blocking mode or timeout mode, set the BIO | |
| * to non-blocking mode (blocking is the default) | |
| */ | |
| if (sock->sock_timeout >= 0.0) { | |
| BIO_set_nbio(SSL_get_rbio(self->ssl), 1); | |
| BIO_set_nbio(SSL_get_wbio(self->ssl), 1); | |
| } | |
| PySSL_BEGIN_ALLOW_THREADS | |
| if (socket_type == PY_SSL_CLIENT) | |
| SSL_set_connect_state(self->ssl); | |
| else | |
| SSL_set_accept_state(self->ssl); | |
| PySSL_END_ALLOW_THREADS | |
| self->socket_type = socket_type; | |
| self->Socket = sock; | |
| Py_INCREF(self->Socket); | |
| if (ssl_sock != Py_None) { | |
| self->ssl_sock = PyWeakref_NewRef(ssl_sock, NULL); | |
| if (self->ssl_sock == NULL) { | |
| Py_DECREF(self); | |
| return NULL; | |
| } | |
| } | |
| return self; | |
| } | |
| /* SSL object methods */ | |
| static PyObject *PySSL_SSLdo_handshake(PySSLSocket *self) | |
| { | |
| int ret; | |
| int err; | |
| int sockstate, nonblocking; | |
| PySocketSockObject *sock = self->Socket; | |
| Py_INCREF(sock); | |
| /* just in case the blocking state of the socket has been changed */ | |
| nonblocking = (sock->sock_timeout >= 0.0); | |
| BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking); | |
| BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking); | |
| /* Actually negotiate SSL connection */ | |
| /* XXX If SSL_do_handshake() returns 0, it's also a failure. */ | |
| do { | |
| PySSL_BEGIN_ALLOW_THREADS | |
| ret = SSL_do_handshake(self->ssl); | |
| err = SSL_get_error(self->ssl, ret); | |
| PySSL_END_ALLOW_THREADS | |
| if (PyErr_CheckSignals()) | |
| goto error; | |
| if (err == SSL_ERROR_WANT_READ) { | |
| sockstate = check_socket_and_wait_for_timeout(sock, 0); | |
| } else if (err == SSL_ERROR_WANT_WRITE) { | |
| sockstate = check_socket_and_wait_for_timeout(sock, 1); | |
| } else { | |
| sockstate = SOCKET_OPERATION_OK; | |
| } | |
| if (sockstate == SOCKET_HAS_TIMED_OUT) { | |
| PyErr_SetString(PySSLErrorObject, | |
| ERRSTR("The handshake operation timed out")); | |
| goto error; | |
| } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) { | |
| PyErr_SetString(PySSLErrorObject, | |
| ERRSTR("Underlying socket has been closed.")); | |
| goto error; | |
| } else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) { | |
| PyErr_SetString(PySSLErrorObject, | |
| ERRSTR("Underlying socket too large for select().")); | |
| goto error; | |
| } else if (sockstate == SOCKET_IS_NONBLOCKING) { | |
| break; | |
| } | |
| } while (err == SSL_ERROR_WANT_READ || err == SSL_ERROR_WANT_WRITE); | |
| Py_DECREF(sock); | |
| if (ret < 1) | |
| return PySSL_SetError(self, ret, __FILE__, __LINE__); | |
| if (self->peer_cert) | |
| X509_free (self->peer_cert); | |
| PySSL_BEGIN_ALLOW_THREADS | |
| self->peer_cert = SSL_get_peer_certificate(self->ssl); | |
| PySSL_END_ALLOW_THREADS | |
| self->handshake_done = 1; | |
| Py_INCREF(Py_None); | |
| return Py_None; | |
| error: | |
| Py_DECREF(sock); | |
| return NULL; | |
| } | |
| static PyObject * | |
| _create_tuple_for_attribute (ASN1_OBJECT *name, ASN1_STRING *value) { | |
| char namebuf[X509_NAME_MAXLEN]; | |
| int buflen; | |
| PyObject *name_obj; | |
| PyObject *value_obj; | |
| PyObject *attr; | |
| unsigned char *valuebuf = NULL; | |
| buflen = OBJ_obj2txt(namebuf, sizeof(namebuf), name, 0); | |
| if (buflen < 0) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| goto fail; | |
| } | |
| name_obj = PyString_FromStringAndSize(namebuf, buflen); | |
| if (name_obj == NULL) | |
| goto fail; | |
| buflen = ASN1_STRING_to_UTF8(&valuebuf, value); | |
| if (buflen < 0) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| Py_DECREF(name_obj); | |
| goto fail; | |
| } | |
| value_obj = PyUnicode_DecodeUTF8((char *) valuebuf, | |
| buflen, "strict"); | |
| OPENSSL_free(valuebuf); | |
| if (value_obj == NULL) { | |
| Py_DECREF(name_obj); | |
| goto fail; | |
| } | |
| attr = PyTuple_New(2); | |
| if (attr == NULL) { | |
| Py_DECREF(name_obj); | |
| Py_DECREF(value_obj); | |
| goto fail; | |
| } | |
| PyTuple_SET_ITEM(attr, 0, name_obj); | |
| PyTuple_SET_ITEM(attr, 1, value_obj); | |
| return attr; | |
| fail: | |
| return NULL; | |
| } | |
| static PyObject * | |
| _create_tuple_for_X509_NAME (X509_NAME *xname) | |
| { | |
| PyObject *dn = NULL; /* tuple which represents the "distinguished name" */ | |
| PyObject *rdn = NULL; /* tuple to hold a "relative distinguished name" */ | |
| PyObject *rdnt; | |
| PyObject *attr = NULL; /* tuple to hold an attribute */ | |
| int entry_count = X509_NAME_entry_count(xname); | |
| X509_NAME_ENTRY *entry; | |
| ASN1_OBJECT *name; | |
| ASN1_STRING *value; | |
| int index_counter; | |
| int rdn_level = -1; | |
| int retcode; | |
| dn = PyList_New(0); | |
| if (dn == NULL) | |
| return NULL; | |
| /* now create another tuple to hold the top-level RDN */ | |
| rdn = PyList_New(0); | |
| if (rdn == NULL) | |
| goto fail0; | |
| for (index_counter = 0; | |
| index_counter < entry_count; | |
| index_counter++) | |
| { | |
| entry = X509_NAME_get_entry(xname, index_counter); | |
| /* check to see if we've gotten to a new RDN */ | |
| if (rdn_level >= 0) { | |
| if (rdn_level != X509_NAME_ENTRY_set(entry)) { | |
| /* yes, new RDN */ | |
| /* add old RDN to DN */ | |
| rdnt = PyList_AsTuple(rdn); | |
| Py_DECREF(rdn); | |
| if (rdnt == NULL) | |
| goto fail0; | |
| retcode = PyList_Append(dn, rdnt); | |
| Py_DECREF(rdnt); | |
| if (retcode < 0) | |
| goto fail0; | |
| /* create new RDN */ | |
| rdn = PyList_New(0); | |
| if (rdn == NULL) | |
| goto fail0; | |
| } | |
| } | |
| rdn_level = X509_NAME_ENTRY_set(entry); | |
| /* now add this attribute to the current RDN */ | |
| name = X509_NAME_ENTRY_get_object(entry); | |
| value = X509_NAME_ENTRY_get_data(entry); | |
| attr = _create_tuple_for_attribute(name, value); | |
| /* | |
| fprintf(stderr, "RDN level %d, attribute %s: %s\n", | |
| entry->set, | |
| PyBytes_AS_STRING(PyTuple_GET_ITEM(attr, 0)), | |
| PyBytes_AS_STRING(PyTuple_GET_ITEM(attr, 1))); | |
| */ | |
| if (attr == NULL) | |
| goto fail1; | |
| retcode = PyList_Append(rdn, attr); | |
| Py_DECREF(attr); | |
| if (retcode < 0) | |
| goto fail1; | |
| } | |
| /* now, there's typically a dangling RDN */ | |
| if (rdn != NULL) { | |
| if (PyList_GET_SIZE(rdn) > 0) { | |
| rdnt = PyList_AsTuple(rdn); | |
| Py_DECREF(rdn); | |
| if (rdnt == NULL) | |
| goto fail0; | |
| retcode = PyList_Append(dn, rdnt); | |
| Py_DECREF(rdnt); | |
| if (retcode < 0) | |
| goto fail0; | |
| } | |
| else { | |
| Py_DECREF(rdn); | |
| } | |
| } | |
| /* convert list to tuple */ | |
| rdnt = PyList_AsTuple(dn); | |
| Py_DECREF(dn); | |
| if (rdnt == NULL) | |
| return NULL; | |
| return rdnt; | |
| fail1: | |
| Py_XDECREF(rdn); | |
| fail0: | |
| Py_XDECREF(dn); | |
| return NULL; | |
| } | |
| static PyObject * | |
| _get_peer_alt_names (X509 *certificate) { | |
| /* this code follows the procedure outlined in | |
| OpenSSL's crypto/x509v3/v3_prn.c:X509v3_EXT_print() | |
| function to extract the STACK_OF(GENERAL_NAME), | |
| then iterates through the stack to add the | |
| names. */ | |
| int i, j; | |
| PyObject *peer_alt_names = Py_None; | |
| PyObject *v = NULL, *t; | |
| X509_EXTENSION *ext = NULL; | |
| GENERAL_NAMES *names = NULL; | |
| GENERAL_NAME *name; | |
| const X509V3_EXT_METHOD *method; | |
| BIO *biobuf = NULL; | |
| char buf[2048]; | |
| char *vptr; | |
| int len; | |
| /* Issue #2973: ASN1_item_d2i() API changed in OpenSSL 0.9.6m */ | |
| #if OPENSSL_VERSION_NUMBER >= 0x009060dfL | |
| const unsigned char *p; | |
| #else | |
| unsigned char *p; | |
| #endif | |
| if (certificate == NULL) | |
| return peer_alt_names; | |
| /* get a memory buffer */ | |
| biobuf = BIO_new(BIO_s_mem()); | |
| i = -1; | |
| while ((i = X509_get_ext_by_NID( | |
| certificate, NID_subject_alt_name, i)) >= 0) { | |
| if (peer_alt_names == Py_None) { | |
| peer_alt_names = PyList_New(0); | |
| if (peer_alt_names == NULL) | |
| goto fail; | |
| } | |
| /* now decode the altName */ | |
| ext = X509_get_ext(certificate, i); | |
| if(!(method = X509V3_EXT_get(ext))) { | |
| PyErr_SetString | |
| (PySSLErrorObject, | |
| ERRSTR("No method for internalizing subjectAltName!")); | |
| goto fail; | |
| } | |
| p = X509_EXTENSION_get_data(ext)->data; | |
| if (method->it) | |
| names = (GENERAL_NAMES*) | |
| (ASN1_item_d2i(NULL, | |
| &p, | |
| X509_EXTENSION_get_data(ext)->length, | |
| ASN1_ITEM_ptr(method->it))); | |
| else | |
| names = (GENERAL_NAMES*) | |
| (method->d2i(NULL, | |
| &p, | |
| X509_EXTENSION_get_data(ext)->length)); | |
| for(j = 0; j < sk_GENERAL_NAME_num(names); j++) { | |
| /* get a rendering of each name in the set of names */ | |
| int gntype; | |
| ASN1_STRING *as = NULL; | |
| name = sk_GENERAL_NAME_value(names, j); | |
| gntype = name->type; | |
| switch (gntype) { | |
| case GEN_DIRNAME: | |
| /* we special-case DirName as a tuple of | |
| tuples of attributes */ | |
| t = PyTuple_New(2); | |
| if (t == NULL) { | |
| goto fail; | |
| } | |
| v = PyString_FromString("DirName"); | |
| if (v == NULL) { | |
| Py_DECREF(t); | |
| goto fail; | |
| } | |
| PyTuple_SET_ITEM(t, 0, v); | |
| v = _create_tuple_for_X509_NAME (name->d.dirn); | |
| if (v == NULL) { | |
| Py_DECREF(t); | |
| goto fail; | |
| } | |
| PyTuple_SET_ITEM(t, 1, v); | |
| break; | |
| case GEN_EMAIL: | |
| case GEN_DNS: | |
| case GEN_URI: | |
| /* GENERAL_NAME_print() doesn't handle NULL bytes in ASN1_string | |
| correctly, CVE-2013-4238 */ | |
| t = PyTuple_New(2); | |
| if (t == NULL) | |
| goto fail; | |
| switch (gntype) { | |
| case GEN_EMAIL: | |
| v = PyString_FromString("email"); | |
| as = name->d.rfc822Name; | |
| break; | |
| case GEN_DNS: | |
| v = PyString_FromString("DNS"); | |
| as = name->d.dNSName; | |
| break; | |
| case GEN_URI: | |
| v = PyString_FromString("URI"); | |
| as = name->d.uniformResourceIdentifier; | |
| break; | |
| } | |
| if (v == NULL) { | |
| Py_DECREF(t); | |
| goto fail; | |
| } | |
| PyTuple_SET_ITEM(t, 0, v); | |
| v = PyString_FromStringAndSize((char *)ASN1_STRING_data(as), | |
| ASN1_STRING_length(as)); | |
| if (v == NULL) { | |
| Py_DECREF(t); | |
| goto fail; | |
| } | |
| PyTuple_SET_ITEM(t, 1, v); | |
| break; | |
| case GEN_RID: | |
| t = PyTuple_New(2); | |
| if (t == NULL) | |
| goto fail; | |
| v = PyUnicode_FromString("Registered ID"); | |
| if (v == NULL) { | |
| Py_DECREF(t); | |
| goto fail; | |
| } | |
| PyTuple_SET_ITEM(t, 0, v); | |
| len = i2t_ASN1_OBJECT(buf, sizeof(buf)-1, name->d.rid); | |
| if (len < 0) { | |
| Py_DECREF(t); | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| goto fail; | |
| } else if (len >= (int)sizeof(buf)) { | |
| v = PyUnicode_FromString("<INVALID>"); | |
| } else { | |
| v = PyUnicode_FromStringAndSize(buf, len); | |
| } | |
| if (v == NULL) { | |
| Py_DECREF(t); | |
| goto fail; | |
| } | |
| PyTuple_SET_ITEM(t, 1, v); | |
| break; | |
| default: | |
| /* for everything else, we use the OpenSSL print form */ | |
| switch (gntype) { | |
| /* check for new general name type */ | |
| case GEN_OTHERNAME: | |
| case GEN_X400: | |
| case GEN_EDIPARTY: | |
| case GEN_IPADD: | |
| case GEN_RID: | |
| break; | |
| default: | |
| if (PyErr_Warn(PyExc_RuntimeWarning, | |
| "Unknown general name type") == -1) { | |
| goto fail; | |
| } | |
| break; | |
| } | |
| (void) BIO_reset(biobuf); | |
| GENERAL_NAME_print(biobuf, name); | |
| len = BIO_gets(biobuf, buf, sizeof(buf)-1); | |
| if (len < 0) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| goto fail; | |
| } | |
| vptr = strchr(buf, ':'); | |
| if (vptr == NULL) { | |
| PyErr_Format(PyExc_ValueError, | |
| "Invalid value %.200s", | |
| buf); | |
| goto fail; | |
| } | |
| t = PyTuple_New(2); | |
| if (t == NULL) | |
| goto fail; | |
| v = PyString_FromStringAndSize(buf, (vptr - buf)); | |
| if (v == NULL) { | |
| Py_DECREF(t); | |
| goto fail; | |
| } | |
| PyTuple_SET_ITEM(t, 0, v); | |
| v = PyString_FromStringAndSize((vptr + 1), (len - (vptr - buf + 1))); | |
| if (v == NULL) { | |
| Py_DECREF(t); | |
| goto fail; | |
| } | |
| PyTuple_SET_ITEM(t, 1, v); | |
| break; | |
| } | |
| /* and add that rendering to the list */ | |
| if (PyList_Append(peer_alt_names, t) < 0) { | |
| Py_DECREF(t); | |
| goto fail; | |
| } | |
| Py_DECREF(t); | |
| } | |
| sk_GENERAL_NAME_pop_free(names, GENERAL_NAME_free); | |
| } | |
| BIO_free(biobuf); | |
| if (peer_alt_names != Py_None) { | |
| v = PyList_AsTuple(peer_alt_names); | |
| Py_DECREF(peer_alt_names); | |
| return v; | |
| } else { | |
| return peer_alt_names; | |
| } | |
| fail: | |
| if (biobuf != NULL) | |
| BIO_free(biobuf); | |
| if (peer_alt_names != Py_None) { | |
| Py_XDECREF(peer_alt_names); | |
| } | |
| return NULL; | |
| } | |
| static PyObject * | |
| _get_aia_uri(X509 *certificate, int nid) { | |
| PyObject *lst = NULL, *ostr = NULL; | |
| int i, result; | |
| AUTHORITY_INFO_ACCESS *info; | |
| info = X509_get_ext_d2i(certificate, NID_info_access, NULL, NULL); | |
| if (info == NULL) | |
| return Py_None; | |
| if (sk_ACCESS_DESCRIPTION_num(info) == 0) { | |
| AUTHORITY_INFO_ACCESS_free(info); | |
| return Py_None; | |
| } | |
| if ((lst = PyList_New(0)) == NULL) { | |
| goto fail; | |
| } | |
| for (i = 0; i < sk_ACCESS_DESCRIPTION_num(info); i++) { | |
| ACCESS_DESCRIPTION *ad = sk_ACCESS_DESCRIPTION_value(info, i); | |
| ASN1_IA5STRING *uri; | |
| if ((OBJ_obj2nid(ad->method) != nid) || | |
| (ad->location->type != GEN_URI)) { | |
| continue; | |
| } | |
| uri = ad->location->d.uniformResourceIdentifier; | |
| ostr = PyUnicode_FromStringAndSize((char *)uri->data, | |
| uri->length); | |
| if (ostr == NULL) { | |
| goto fail; | |
| } | |
| result = PyList_Append(lst, ostr); | |
| Py_DECREF(ostr); | |
| if (result < 0) { | |
| goto fail; | |
| } | |
| } | |
| AUTHORITY_INFO_ACCESS_free(info); | |
| /* convert to tuple or None */ | |
| if (PyList_Size(lst) == 0) { | |
| Py_DECREF(lst); | |
| return Py_None; | |
| } else { | |
| PyObject *tup; | |
| tup = PyList_AsTuple(lst); | |
| Py_DECREF(lst); | |
| return tup; | |
| } | |
| fail: | |
| AUTHORITY_INFO_ACCESS_free(info); | |
| Py_XDECREF(lst); | |
| return NULL; | |
| } | |
| static PyObject * | |
| _get_crl_dp(X509 *certificate) { | |
| STACK_OF(DIST_POINT) *dps; | |
| int i, j; | |
| PyObject *lst, *res = NULL; | |
| #if OPENSSL_VERSION_NUMBER >= 0x10001000L | |
| /* Calls x509v3_cache_extensions and sets up crldp */ | |
| X509_check_ca(certificate); | |
| #endif | |
| dps = X509_get_ext_d2i(certificate, NID_crl_distribution_points, NULL, NULL); | |
| if (dps == NULL) | |
| return Py_None; | |
| lst = PyList_New(0); | |
| if (lst == NULL) | |
| goto done; | |
| for (i=0; i < sk_DIST_POINT_num(dps); i++) { | |
| DIST_POINT *dp; | |
| STACK_OF(GENERAL_NAME) *gns; | |
| dp = sk_DIST_POINT_value(dps, i); | |
| gns = dp->distpoint->name.fullname; | |
| for (j=0; j < sk_GENERAL_NAME_num(gns); j++) { | |
| GENERAL_NAME *gn; | |
| ASN1_IA5STRING *uri; | |
| PyObject *ouri; | |
| int err; | |
| gn = sk_GENERAL_NAME_value(gns, j); | |
| if (gn->type != GEN_URI) { | |
| continue; | |
| } | |
| uri = gn->d.uniformResourceIdentifier; | |
| ouri = PyUnicode_FromStringAndSize((char *)uri->data, | |
| uri->length); | |
| if (ouri == NULL) | |
| goto done; | |
| err = PyList_Append(lst, ouri); | |
| Py_DECREF(ouri); | |
| if (err < 0) | |
| goto done; | |
| } | |
| } | |
| /* Convert to tuple. */ | |
| res = (PyList_GET_SIZE(lst) > 0) ? PyList_AsTuple(lst) : Py_None; | |
| done: | |
| Py_XDECREF(lst); | |
| #if OPENSSL_VERSION_NUMBER < 0x10001000L | |
| sk_DIST_POINT_free(dps); | |
| #endif | |
| return res; | |
| } | |
| static PyObject * | |
| _decode_certificate(X509 *certificate) { | |
| PyObject *retval = NULL; | |
| BIO *biobuf = NULL; | |
| PyObject *peer; | |
| PyObject *peer_alt_names = NULL; | |
| PyObject *issuer; | |
| PyObject *version; | |
| PyObject *sn_obj; | |
| PyObject *obj; | |
| ASN1_INTEGER *serialNumber; | |
| char buf[2048]; | |
| int len, result; | |
| ASN1_TIME *notBefore, *notAfter; | |
| PyObject *pnotBefore, *pnotAfter; | |
| retval = PyDict_New(); | |
| if (retval == NULL) | |
| return NULL; | |
| peer = _create_tuple_for_X509_NAME( | |
| X509_get_subject_name(certificate)); | |
| if (peer == NULL) | |
| goto fail0; | |
| if (PyDict_SetItemString(retval, (const char *) "subject", peer) < 0) { | |
| Py_DECREF(peer); | |
| goto fail0; | |
| } | |
| Py_DECREF(peer); | |
| issuer = _create_tuple_for_X509_NAME( | |
| X509_get_issuer_name(certificate)); | |
| if (issuer == NULL) | |
| goto fail0; | |
| if (PyDict_SetItemString(retval, (const char *)"issuer", issuer) < 0) { | |
| Py_DECREF(issuer); | |
| goto fail0; | |
| } | |
| Py_DECREF(issuer); | |
| version = PyLong_FromLong(X509_get_version(certificate) + 1); | |
| if (version == NULL) | |
| goto fail0; | |
| if (PyDict_SetItemString(retval, "version", version) < 0) { | |
| Py_DECREF(version); | |
| goto fail0; | |
| } | |
| Py_DECREF(version); | |
| /* get a memory buffer */ | |
| biobuf = BIO_new(BIO_s_mem()); | |
| (void) BIO_reset(biobuf); | |
| serialNumber = X509_get_serialNumber(certificate); | |
| /* should not exceed 20 octets, 160 bits, so buf is big enough */ | |
| i2a_ASN1_INTEGER(biobuf, serialNumber); | |
| len = BIO_gets(biobuf, buf, sizeof(buf)-1); | |
| if (len < 0) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| goto fail1; | |
| } | |
| sn_obj = PyUnicode_FromStringAndSize(buf, len); | |
| if (sn_obj == NULL) | |
| goto fail1; | |
| if (PyDict_SetItemString(retval, "serialNumber", sn_obj) < 0) { | |
| Py_DECREF(sn_obj); | |
| goto fail1; | |
| } | |
| Py_DECREF(sn_obj); | |
| (void) BIO_reset(biobuf); | |
| notBefore = X509_get_notBefore(certificate); | |
| ASN1_TIME_print(biobuf, notBefore); | |
| len = BIO_gets(biobuf, buf, sizeof(buf)-1); | |
| if (len < 0) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| goto fail1; | |
| } | |
| pnotBefore = PyUnicode_FromStringAndSize(buf, len); | |
| if (pnotBefore == NULL) | |
| goto fail1; | |
| if (PyDict_SetItemString(retval, "notBefore", pnotBefore) < 0) { | |
| Py_DECREF(pnotBefore); | |
| goto fail1; | |
| } | |
| Py_DECREF(pnotBefore); | |
| (void) BIO_reset(biobuf); | |
| notAfter = X509_get_notAfter(certificate); | |
| ASN1_TIME_print(biobuf, notAfter); | |
| len = BIO_gets(biobuf, buf, sizeof(buf)-1); | |
| if (len < 0) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| goto fail1; | |
| } | |
| pnotAfter = PyString_FromStringAndSize(buf, len); | |
| if (pnotAfter == NULL) | |
| goto fail1; | |
| if (PyDict_SetItemString(retval, "notAfter", pnotAfter) < 0) { | |
| Py_DECREF(pnotAfter); | |
| goto fail1; | |
| } | |
| Py_DECREF(pnotAfter); | |
| /* Now look for subjectAltName */ | |
| peer_alt_names = _get_peer_alt_names(certificate); | |
| if (peer_alt_names == NULL) | |
| goto fail1; | |
| else if (peer_alt_names != Py_None) { | |
| if (PyDict_SetItemString(retval, "subjectAltName", | |
| peer_alt_names) < 0) { | |
| Py_DECREF(peer_alt_names); | |
| goto fail1; | |
| } | |
| Py_DECREF(peer_alt_names); | |
| } | |
| /* Authority Information Access: OCSP URIs */ | |
| obj = _get_aia_uri(certificate, NID_ad_OCSP); | |
| if (obj == NULL) { | |
| goto fail1; | |
| } else if (obj != Py_None) { | |
| result = PyDict_SetItemString(retval, "OCSP", obj); | |
| Py_DECREF(obj); | |
| if (result < 0) { | |
| goto fail1; | |
| } | |
| } | |
| obj = _get_aia_uri(certificate, NID_ad_ca_issuers); | |
| if (obj == NULL) { | |
| goto fail1; | |
| } else if (obj != Py_None) { | |
| result = PyDict_SetItemString(retval, "caIssuers", obj); | |
| Py_DECREF(obj); | |
| if (result < 0) { | |
| goto fail1; | |
| } | |
| } | |
| /* CDP (CRL distribution points) */ | |
| obj = _get_crl_dp(certificate); | |
| if (obj == NULL) { | |
| goto fail1; | |
| } else if (obj != Py_None) { | |
| result = PyDict_SetItemString(retval, "crlDistributionPoints", obj); | |
| Py_DECREF(obj); | |
| if (result < 0) { | |
| goto fail1; | |
| } | |
| } | |
| BIO_free(biobuf); | |
| return retval; | |
| fail1: | |
| if (biobuf != NULL) | |
| BIO_free(biobuf); | |
| fail0: | |
| Py_XDECREF(retval); | |
| return NULL; | |
| } | |
| static PyObject * | |
| _certificate_to_der(X509 *certificate) | |
| { | |
| unsigned char *bytes_buf = NULL; | |
| int len; | |
| PyObject *retval; | |
| bytes_buf = NULL; | |
| len = i2d_X509(certificate, &bytes_buf); | |
| if (len < 0) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| return NULL; | |
| } | |
| /* this is actually an immutable bytes sequence */ | |
| retval = PyBytes_FromStringAndSize((const char *) bytes_buf, len); | |
| OPENSSL_free(bytes_buf); | |
| return retval; | |
| } | |
| static PyObject * | |
| PySSL_test_decode_certificate (PyObject *mod, PyObject *args) { | |
| PyObject *retval = NULL; | |
| char *filename = NULL; | |
| X509 *x=NULL; | |
| BIO *cert; | |
| if (!PyArg_ParseTuple(args, "s:test_decode_certificate", &filename)) | |
| return NULL; | |
| if ((cert=BIO_new(BIO_s_file())) == NULL) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "Can't malloc memory to read file"); | |
| goto fail0; | |
| } | |
| if (BIO_read_filename(cert,filename) <= 0) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "Can't open file"); | |
| goto fail0; | |
| } | |
| x = PEM_read_bio_X509_AUX(cert,NULL, NULL, NULL); | |
| if (x == NULL) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "Error decoding PEM-encoded file"); | |
| goto fail0; | |
| } | |
| retval = _decode_certificate(x); | |
| X509_free(x); | |
| fail0: | |
| if (cert != NULL) BIO_free(cert); | |
| return retval; | |
| } | |
| static PyObject * | |
| PySSL_peercert(PySSLSocket *self, PyObject *args) | |
| { | |
| int verification; | |
| PyObject *binary_mode = Py_None; | |
| int b; | |
| if (!PyArg_ParseTuple(args, "|O:peer_certificate", &binary_mode)) | |
| return NULL; | |
| if (!self->handshake_done) { | |
| PyErr_SetString(PyExc_ValueError, | |
| "handshake not done yet"); | |
| return NULL; | |
| } | |
| if (!self->peer_cert) | |
| Py_RETURN_NONE; | |
| b = PyObject_IsTrue(binary_mode); | |
| if (b < 0) | |
| return NULL; | |
| if (b) { | |
| /* return cert in DER-encoded format */ | |
| return _certificate_to_der(self->peer_cert); | |
| } else { | |
| verification = SSL_CTX_get_verify_mode(SSL_get_SSL_CTX(self->ssl)); | |
| if ((verification & SSL_VERIFY_PEER) == 0) | |
| return PyDict_New(); | |
| else | |
| return _decode_certificate(self->peer_cert); | |
| } | |
| } | |
| PyDoc_STRVAR(PySSL_peercert_doc, | |
| "peer_certificate([der=False]) -> certificate\n\ | |
| \n\ | |
| Returns the certificate for the peer. If no certificate was provided,\n\ | |
| returns None. If a certificate was provided, but not validated, returns\n\ | |
| an empty dictionary. Otherwise returns a dict containing information\n\ | |
| about the peer certificate.\n\ | |
| \n\ | |
| If the optional argument is True, returns a DER-encoded copy of the\n\ | |
| peer certificate, or None if no certificate was provided. This will\n\ | |
| return the certificate even if it wasn't validated."); | |
| static PyObject *PySSL_cipher (PySSLSocket *self) { | |
| PyObject *retval, *v; | |
| const SSL_CIPHER *current; | |
| char *cipher_name; | |
| char *cipher_protocol; | |
| if (self->ssl == NULL) | |
| Py_RETURN_NONE; | |
| current = SSL_get_current_cipher(self->ssl); | |
| if (current == NULL) | |
| Py_RETURN_NONE; | |
| retval = PyTuple_New(3); | |
| if (retval == NULL) | |
| return NULL; | |
| cipher_name = (char *) SSL_CIPHER_get_name(current); | |
| if (cipher_name == NULL) { | |
| Py_INCREF(Py_None); | |
| PyTuple_SET_ITEM(retval, 0, Py_None); | |
| } else { | |
| v = PyString_FromString(cipher_name); | |
| if (v == NULL) | |
| goto fail0; | |
| PyTuple_SET_ITEM(retval, 0, v); | |
| } | |
| cipher_protocol = (char *) SSL_CIPHER_get_version(current); | |
| if (cipher_protocol == NULL) { | |
| Py_INCREF(Py_None); | |
| PyTuple_SET_ITEM(retval, 1, Py_None); | |
| } else { | |
| v = PyString_FromString(cipher_protocol); | |
| if (v == NULL) | |
| goto fail0; | |
| PyTuple_SET_ITEM(retval, 1, v); | |
| } | |
| v = PyInt_FromLong(SSL_CIPHER_get_bits(current, NULL)); | |
| if (v == NULL) | |
| goto fail0; | |
| PyTuple_SET_ITEM(retval, 2, v); | |
| return retval; | |
| fail0: | |
| Py_DECREF(retval); | |
| return NULL; | |
| } | |
| static PyObject *PySSL_version(PySSLSocket *self) | |
| { | |
| const char *version; | |
| if (self->ssl == NULL) | |
| Py_RETURN_NONE; | |
| version = SSL_get_version(self->ssl); | |
| if (!strcmp(version, "unknown")) | |
| Py_RETURN_NONE; | |
| return PyUnicode_FromString(version); | |
| } | |
| #ifdef OPENSSL_NPN_NEGOTIATED | |
| static PyObject *PySSL_selected_npn_protocol(PySSLSocket *self) { | |
| const unsigned char *out; | |
| unsigned int outlen; | |
| SSL_get0_next_proto_negotiated(self->ssl, | |
| &out, &outlen); | |
| if (out == NULL) | |
| Py_RETURN_NONE; | |
| return PyString_FromStringAndSize((char *)out, outlen); | |
| } | |
| #endif | |
| #ifdef HAVE_ALPN | |
| static PyObject *PySSL_selected_alpn_protocol(PySSLSocket *self) { | |
| const unsigned char *out; | |
| unsigned int outlen; | |
| SSL_get0_alpn_selected(self->ssl, &out, &outlen); | |
| if (out == NULL) | |
| Py_RETURN_NONE; | |
| return PyString_FromStringAndSize((char *)out, outlen); | |
| } | |
| #endif | |
| static PyObject *PySSL_compression(PySSLSocket *self) { | |
| #ifdef OPENSSL_NO_COMP | |
| Py_RETURN_NONE; | |
| #else | |
| const COMP_METHOD *comp_method; | |
| const char *short_name; | |
| if (self->ssl == NULL) | |
| Py_RETURN_NONE; | |
| comp_method = SSL_get_current_compression(self->ssl); | |
| if (comp_method == NULL || COMP_get_type(comp_method) == NID_undef) | |
| Py_RETURN_NONE; | |
| short_name = OBJ_nid2sn(COMP_get_type(comp_method)); | |
| if (short_name == NULL) | |
| Py_RETURN_NONE; | |
| return PyBytes_FromString(short_name); | |
| #endif | |
| } | |
| static PySSLContext *PySSL_get_context(PySSLSocket *self, void *closure) { | |
| Py_INCREF(self->ctx); | |
| return self->ctx; | |
| } | |
| static int PySSL_set_context(PySSLSocket *self, PyObject *value, | |
| void *closure) { | |
| if (PyObject_TypeCheck(value, &PySSLContext_Type)) { | |
| #if !HAVE_SNI | |
| PyErr_SetString(PyExc_NotImplementedError, "setting a socket's " | |
| "context is not supported by your OpenSSL library"); | |
| return -1; | |
| #else | |
| Py_INCREF(value); | |
| Py_SETREF(self->ctx, (PySSLContext *)value); | |
| SSL_set_SSL_CTX(self->ssl, self->ctx->ctx); | |
| #endif | |
| } else { | |
| PyErr_SetString(PyExc_TypeError, "The value must be a SSLContext"); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| PyDoc_STRVAR(PySSL_set_context_doc, | |
| "_setter_context(ctx)\n\ | |
| \ | |
| This changes the context associated with the SSLSocket. This is typically\n\ | |
| used from within a callback function set by the set_servername_callback\n\ | |
| on the SSLContext to change the certificate information associated with the\n\ | |
| SSLSocket before the cryptographic exchange handshake messages\n"); | |
| static void PySSL_dealloc(PySSLSocket *self) | |
| { | |
| if (self->peer_cert) /* Possible not to have one? */ | |
| X509_free (self->peer_cert); | |
| if (self->ssl) | |
| SSL_free(self->ssl); | |
| Py_XDECREF(self->Socket); | |
| Py_XDECREF(self->ssl_sock); | |
| Py_XDECREF(self->ctx); | |
| PyObject_Del(self); | |
| } | |
| /* If the socket has a timeout, do a select()/poll() on the socket. | |
| The argument writing indicates the direction. | |
| Returns one of the possibilities in the timeout_state enum (above). | |
| */ | |
| static int | |
| check_socket_and_wait_for_timeout(PySocketSockObject *s, int writing) | |
| { | |
| fd_set fds; | |
| struct timeval tv; | |
| int rc; | |
| /* Nothing to do unless we're in timeout mode (not non-blocking) */ | |
| if (s->sock_timeout < 0.0) | |
| return SOCKET_IS_BLOCKING; | |
| else if (s->sock_timeout == 0.0) | |
| return SOCKET_IS_NONBLOCKING; | |
| /* Guard against closed socket */ | |
| if (s->sock_fd < 0) | |
| return SOCKET_HAS_BEEN_CLOSED; | |
| /* Prefer poll, if available, since you can poll() any fd | |
| * which can't be done with select(). */ | |
| #ifdef HAVE_POLL | |
| { | |
| struct pollfd pollfd; | |
| int timeout; | |
| pollfd.fd = s->sock_fd; | |
| pollfd.events = writing ? POLLOUT : POLLIN; | |
| /* s->sock_timeout is in seconds, timeout in ms */ | |
| timeout = (int)(s->sock_timeout * 1000 + 0.5); | |
| PySSL_BEGIN_ALLOW_THREADS | |
| rc = poll(&pollfd, 1, timeout); | |
| PySSL_END_ALLOW_THREADS | |
| goto normal_return; | |
| } | |
| #endif | |
| /* Guard against socket too large for select*/ | |
| if (!_PyIsSelectable_fd(s->sock_fd)) | |
| return SOCKET_TOO_LARGE_FOR_SELECT; | |
| /* Construct the arguments to select */ | |
| tv.tv_sec = (int)s->sock_timeout; | |
| tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6); | |
| FD_ZERO(&fds); | |
| FD_SET(s->sock_fd, &fds); | |
| /* See if the socket is ready */ | |
| PySSL_BEGIN_ALLOW_THREADS | |
| if (writing) | |
| rc = select(s->sock_fd+1, NULL, &fds, NULL, &tv); | |
| else | |
| rc = select(s->sock_fd+1, &fds, NULL, NULL, &tv); | |
| PySSL_END_ALLOW_THREADS | |
| #ifdef HAVE_POLL | |
| normal_return: | |
| #endif | |
| /* Return SOCKET_TIMED_OUT on timeout, SOCKET_OPERATION_OK otherwise | |
| (when we are able to write or when there's something to read) */ | |
| return rc == 0 ? SOCKET_HAS_TIMED_OUT : SOCKET_OPERATION_OK; | |
| } | |
| static PyObject *PySSL_SSLwrite(PySSLSocket *self, PyObject *args) | |
| { | |
| Py_buffer buf; | |
| int len; | |
| int sockstate; | |
| int err; | |
| int nonblocking; | |
| PySocketSockObject *sock = self->Socket; | |
| Py_INCREF(sock); | |
| if (!PyArg_ParseTuple(args, "s*:write", &buf)) { | |
| Py_DECREF(sock); | |
| return NULL; | |
| } | |
| if (buf.len > INT_MAX) { | |
| PyErr_Format(PyExc_OverflowError, | |
| "string longer than %d bytes", INT_MAX); | |
| goto error; | |
| } | |
| /* just in case the blocking state of the socket has been changed */ | |
| nonblocking = (sock->sock_timeout >= 0.0); | |
| BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking); | |
| BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking); | |
| sockstate = check_socket_and_wait_for_timeout(sock, 1); | |
| if (sockstate == SOCKET_HAS_TIMED_OUT) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "The write operation timed out"); | |
| goto error; | |
| } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "Underlying socket has been closed."); | |
| goto error; | |
| } else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "Underlying socket too large for select()."); | |
| goto error; | |
| } | |
| do { | |
| PySSL_BEGIN_ALLOW_THREADS | |
| len = SSL_write(self->ssl, buf.buf, (int)buf.len); | |
| err = SSL_get_error(self->ssl, len); | |
| PySSL_END_ALLOW_THREADS | |
| if (PyErr_CheckSignals()) { | |
| goto error; | |
| } | |
| if (err == SSL_ERROR_WANT_READ) { | |
| sockstate = check_socket_and_wait_for_timeout(sock, 0); | |
| } else if (err == SSL_ERROR_WANT_WRITE) { | |
| sockstate = check_socket_and_wait_for_timeout(sock, 1); | |
| } else { | |
| sockstate = SOCKET_OPERATION_OK; | |
| } | |
| if (sockstate == SOCKET_HAS_TIMED_OUT) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "The write operation timed out"); | |
| goto error; | |
| } else if (sockstate == SOCKET_HAS_BEEN_CLOSED) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "Underlying socket has been closed."); | |
| goto error; | |
| } else if (sockstate == SOCKET_IS_NONBLOCKING) { | |
| break; | |
| } | |
| } while (err == SSL_ERROR_WANT_READ || err == SSL_ERROR_WANT_WRITE); | |
| Py_DECREF(sock); | |
| PyBuffer_Release(&buf); | |
| if (len > 0) | |
| return PyInt_FromLong(len); | |
| else | |
| return PySSL_SetError(self, len, __FILE__, __LINE__); | |
| error: | |
| Py_DECREF(sock); | |
| PyBuffer_Release(&buf); | |
| return NULL; | |
| } | |
| PyDoc_STRVAR(PySSL_SSLwrite_doc, | |
| "write(s) -> len\n\ | |
| \n\ | |
| Writes the string s into the SSL object. Returns the number\n\ | |
| of bytes written."); | |
| static PyObject *PySSL_SSLpending(PySSLSocket *self) | |
| { | |
| int count = 0; | |
| PySSL_BEGIN_ALLOW_THREADS | |
| count = SSL_pending(self->ssl); | |
| PySSL_END_ALLOW_THREADS | |
| if (count < 0) | |
| return PySSL_SetError(self, count, __FILE__, __LINE__); | |
| else | |
| return PyInt_FromLong(count); | |
| } | |
| PyDoc_STRVAR(PySSL_SSLpending_doc, | |
| "pending() -> count\n\ | |
| \n\ | |
| Returns the number of already decrypted bytes available for read,\n\ | |
| pending on the connection.\n"); | |
| static PyObject *PySSL_SSLread(PySSLSocket *self, PyObject *args) | |
| { | |
| PyObject *dest = NULL; | |
| Py_buffer buf; | |
| char *mem; | |
| int len, count; | |
| int buf_passed = 0; | |
| int sockstate; | |
| int err; | |
| int nonblocking; | |
| PySocketSockObject *sock = self->Socket; | |
| Py_INCREF(sock); | |
| buf.obj = NULL; | |
| buf.buf = NULL; | |
| if (!PyArg_ParseTuple(args, "i|w*:read", &len, &buf)) | |
| goto error; | |
| if ((buf.buf == NULL) && (buf.obj == NULL)) { | |
| if (len < 0) { | |
| PyErr_SetString(PyExc_ValueError, "size should not be negative"); | |
| goto error; | |
| } | |
| dest = PyBytes_FromStringAndSize(NULL, len); | |
| if (dest == NULL) | |
| goto error; | |
| if (len == 0) { | |
| Py_XDECREF(sock); | |
| return dest; | |
| } | |
| mem = PyBytes_AS_STRING(dest); | |
| } | |
| else { | |
| buf_passed = 1; | |
| mem = buf.buf; | |
| if (len <= 0 || len > buf.len) { | |
| len = (int) buf.len; | |
| if (buf.len != len) { | |
| PyErr_SetString(PyExc_OverflowError, | |
| "maximum length can't fit in a C 'int'"); | |
| goto error; | |
| } | |
| if (len == 0) { | |
| count = 0; | |
| goto done; | |
| } | |
| } | |
| } | |
| /* just in case the blocking state of the socket has been changed */ | |
| nonblocking = (sock->sock_timeout >= 0.0); | |
| BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking); | |
| BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking); | |
| do { | |
| PySSL_BEGIN_ALLOW_THREADS | |
| count = SSL_read(self->ssl, mem, len); | |
| err = SSL_get_error(self->ssl, count); | |
| PySSL_END_ALLOW_THREADS | |
| if (PyErr_CheckSignals()) | |
| goto error; | |
| if (err == SSL_ERROR_WANT_READ) { | |
| sockstate = check_socket_and_wait_for_timeout(sock, 0); | |
| } else if (err == SSL_ERROR_WANT_WRITE) { | |
| sockstate = check_socket_and_wait_for_timeout(sock, 1); | |
| } else if ((err == SSL_ERROR_ZERO_RETURN) && | |
| (SSL_get_shutdown(self->ssl) == | |
| SSL_RECEIVED_SHUTDOWN)) | |
| { | |
| count = 0; | |
| goto done; | |
| } else { | |
| sockstate = SOCKET_OPERATION_OK; | |
| } | |
| if (sockstate == SOCKET_HAS_TIMED_OUT) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "The read operation timed out"); | |
| goto error; | |
| } else if (sockstate == SOCKET_IS_NONBLOCKING) { | |
| break; | |
| } | |
| } while (err == SSL_ERROR_WANT_READ || err == SSL_ERROR_WANT_WRITE); | |
| if (count <= 0) { | |
| PySSL_SetError(self, count, __FILE__, __LINE__); | |
| goto error; | |
| } | |
| done: | |
| Py_DECREF(sock); | |
| if (!buf_passed) { | |
| _PyBytes_Resize(&dest, count); | |
| return dest; | |
| } | |
| else { | |
| PyBuffer_Release(&buf); | |
| return PyLong_FromLong(count); | |
| } | |
| error: | |
| Py_DECREF(sock); | |
| if (!buf_passed) | |
| Py_XDECREF(dest); | |
| else | |
| PyBuffer_Release(&buf); | |
| return NULL; | |
| } | |
| PyDoc_STRVAR(PySSL_SSLread_doc, | |
| "read([len]) -> string\n\ | |
| \n\ | |
| Read up to len bytes from the SSL socket."); | |
| static PyObject *PySSL_SSLshutdown(PySSLSocket *self) | |
| { | |
| int err, ssl_err, sockstate, nonblocking; | |
| int zeros = 0; | |
| PySocketSockObject *sock = self->Socket; | |
| /* Guard against closed socket */ | |
| if (sock->sock_fd < 0) { | |
| _setSSLError("Underlying socket connection gone", | |
| PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__); | |
| return NULL; | |
| } | |
| Py_INCREF(sock); | |
| /* Just in case the blocking state of the socket has been changed */ | |
| nonblocking = (sock->sock_timeout >= 0.0); | |
| BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking); | |
| BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking); | |
| while (1) { | |
| PySSL_BEGIN_ALLOW_THREADS | |
| /* Disable read-ahead so that unwrap can work correctly. | |
| * Otherwise OpenSSL might read in too much data, | |
| * eating clear text data that happens to be | |
| * transmitted after the SSL shutdown. | |
| * Should be safe to call repeatedly every time this | |
| * function is used and the shutdown_seen_zero != 0 | |
| * condition is met. | |
| */ | |
| if (self->shutdown_seen_zero) | |
| SSL_set_read_ahead(self->ssl, 0); | |
| err = SSL_shutdown(self->ssl); | |
| PySSL_END_ALLOW_THREADS | |
| /* If err == 1, a secure shutdown with SSL_shutdown() is complete */ | |
| if (err > 0) | |
| break; | |
| if (err == 0) { | |
| /* Don't loop endlessly; instead preserve legacy | |
| behaviour of trying SSL_shutdown() only twice. | |
| This looks necessary for OpenSSL < 0.9.8m */ | |
| if (++zeros > 1) | |
| break; | |
| /* Shutdown was sent, now try receiving */ | |
| self->shutdown_seen_zero = 1; | |
| continue; | |
| } | |
| /* Possibly retry shutdown until timeout or failure */ | |
| ssl_err = SSL_get_error(self->ssl, err); | |
| if (ssl_err == SSL_ERROR_WANT_READ) | |
| sockstate = check_socket_and_wait_for_timeout(sock, 0); | |
| else if (ssl_err == SSL_ERROR_WANT_WRITE) | |
| sockstate = check_socket_and_wait_for_timeout(sock, 1); | |
| else | |
| break; | |
| if (sockstate == SOCKET_HAS_TIMED_OUT) { | |
| if (ssl_err == SSL_ERROR_WANT_READ) | |
| PyErr_SetString(PySSLErrorObject, | |
| "The read operation timed out"); | |
| else | |
| PyErr_SetString(PySSLErrorObject, | |
| "The write operation timed out"); | |
| goto error; | |
| } | |
| else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "Underlying socket too large for select()."); | |
| goto error; | |
| } | |
| else if (sockstate != SOCKET_OPERATION_OK) | |
| /* Retain the SSL error code */ | |
| break; | |
| } | |
| if (err < 0) { | |
| Py_DECREF(sock); | |
| return PySSL_SetError(self, err, __FILE__, __LINE__); | |
| } | |
| else | |
| /* It's already INCREF'ed */ | |
| return (PyObject *) sock; | |
| error: | |
| Py_DECREF(sock); | |
| return NULL; | |
| } | |
| PyDoc_STRVAR(PySSL_SSLshutdown_doc, | |
| "shutdown(s) -> socket\n\ | |
| \n\ | |
| Does the SSL shutdown handshake with the remote end, and returns\n\ | |
| the underlying socket object."); | |
| #if HAVE_OPENSSL_FINISHED | |
| static PyObject * | |
| PySSL_tls_unique_cb(PySSLSocket *self) | |
| { | |
| PyObject *retval = NULL; | |
| char buf[PySSL_CB_MAXLEN]; | |
| size_t len; | |
| if (SSL_session_reused(self->ssl) ^ !self->socket_type) { | |
| /* if session is resumed XOR we are the client */ | |
| len = SSL_get_finished(self->ssl, buf, PySSL_CB_MAXLEN); | |
| } | |
| else { | |
| /* if a new session XOR we are the server */ | |
| len = SSL_get_peer_finished(self->ssl, buf, PySSL_CB_MAXLEN); | |
| } | |
| /* It cannot be negative in current OpenSSL version as of July 2011 */ | |
| if (len == 0) | |
| Py_RETURN_NONE; | |
| retval = PyBytes_FromStringAndSize(buf, len); | |
| return retval; | |
| } | |
| PyDoc_STRVAR(PySSL_tls_unique_cb_doc, | |
| "tls_unique_cb() -> bytes\n\ | |
| \n\ | |
| Returns the 'tls-unique' channel binding data, as defined by RFC 5929.\n\ | |
| \n\ | |
| If the TLS handshake is not yet complete, None is returned"); | |
| #endif /* HAVE_OPENSSL_FINISHED */ | |
| static PyGetSetDef ssl_getsetlist[] = { | |
| {"context", (getter) PySSL_get_context, | |
| (setter) PySSL_set_context, PySSL_set_context_doc}, | |
| {NULL}, /* sentinel */ | |
| }; | |
| static PyMethodDef PySSLMethods[] = { | |
| {"do_handshake", (PyCFunction)PySSL_SSLdo_handshake, METH_NOARGS}, | |
| {"write", (PyCFunction)PySSL_SSLwrite, METH_VARARGS, | |
| PySSL_SSLwrite_doc}, | |
| {"read", (PyCFunction)PySSL_SSLread, METH_VARARGS, | |
| PySSL_SSLread_doc}, | |
| {"pending", (PyCFunction)PySSL_SSLpending, METH_NOARGS, | |
| PySSL_SSLpending_doc}, | |
| {"peer_certificate", (PyCFunction)PySSL_peercert, METH_VARARGS, | |
| PySSL_peercert_doc}, | |
| {"cipher", (PyCFunction)PySSL_cipher, METH_NOARGS}, | |
| {"version", (PyCFunction)PySSL_version, METH_NOARGS}, | |
| #ifdef OPENSSL_NPN_NEGOTIATED | |
| {"selected_npn_protocol", (PyCFunction)PySSL_selected_npn_protocol, METH_NOARGS}, | |
| #endif | |
| #ifdef HAVE_ALPN | |
| {"selected_alpn_protocol", (PyCFunction)PySSL_selected_alpn_protocol, METH_NOARGS}, | |
| #endif | |
| {"compression", (PyCFunction)PySSL_compression, METH_NOARGS}, | |
| {"shutdown", (PyCFunction)PySSL_SSLshutdown, METH_NOARGS, | |
| PySSL_SSLshutdown_doc}, | |
| #if HAVE_OPENSSL_FINISHED | |
| {"tls_unique_cb", (PyCFunction)PySSL_tls_unique_cb, METH_NOARGS, | |
| PySSL_tls_unique_cb_doc}, | |
| #endif | |
| {NULL, NULL} | |
| }; | |
| static PyTypeObject PySSLSocket_Type = { | |
| PyVarObject_HEAD_INIT(NULL, 0) | |
| "_ssl._SSLSocket", /*tp_name*/ | |
| sizeof(PySSLSocket), /*tp_basicsize*/ | |
| 0, /*tp_itemsize*/ | |
| /* methods */ | |
| (destructor)PySSL_dealloc, /*tp_dealloc*/ | |
| 0, /*tp_print*/ | |
| 0, /*tp_getattr*/ | |
| 0, /*tp_setattr*/ | |
| 0, /*tp_reserved*/ | |
| 0, /*tp_repr*/ | |
| 0, /*tp_as_number*/ | |
| 0, /*tp_as_sequence*/ | |
| 0, /*tp_as_mapping*/ | |
| 0, /*tp_hash*/ | |
| 0, /*tp_call*/ | |
| 0, /*tp_str*/ | |
| 0, /*tp_getattro*/ | |
| 0, /*tp_setattro*/ | |
| 0, /*tp_as_buffer*/ | |
| Py_TPFLAGS_DEFAULT, /*tp_flags*/ | |
| 0, /*tp_doc*/ | |
| 0, /*tp_traverse*/ | |
| 0, /*tp_clear*/ | |
| 0, /*tp_richcompare*/ | |
| 0, /*tp_weaklistoffset*/ | |
| 0, /*tp_iter*/ | |
| 0, /*tp_iternext*/ | |
| PySSLMethods, /*tp_methods*/ | |
| 0, /*tp_members*/ | |
| ssl_getsetlist, /*tp_getset*/ | |
| }; | |
| /* | |
| * _SSLContext objects | |
| */ | |
| static PyObject * | |
| context_new(PyTypeObject *type, PyObject *args, PyObject *kwds) | |
| { | |
| char *kwlist[] = {"protocol", NULL}; | |
| PySSLContext *self; | |
| int proto_version = PY_SSL_VERSION_TLS; | |
| long options; | |
| SSL_CTX *ctx = NULL; | |
| if (!PyArg_ParseTupleAndKeywords( | |
| args, kwds, "i:_SSLContext", kwlist, | |
| &proto_version)) | |
| return NULL; | |
| PySSL_BEGIN_ALLOW_THREADS | |
| if (proto_version == PY_SSL_VERSION_TLS1) | |
| ctx = SSL_CTX_new(TLSv1_method()); | |
| #if HAVE_TLSv1_2 | |
| else if (proto_version == PY_SSL_VERSION_TLS1_1) | |
| ctx = SSL_CTX_new(TLSv1_1_method()); | |
| else if (proto_version == PY_SSL_VERSION_TLS1_2) | |
| ctx = SSL_CTX_new(TLSv1_2_method()); | |
| #endif | |
| #ifndef OPENSSL_NO_SSL3 | |
| else if (proto_version == PY_SSL_VERSION_SSL3) | |
| ctx = SSL_CTX_new(SSLv3_method()); | |
| #endif | |
| #ifndef OPENSSL_NO_SSL2 | |
| else if (proto_version == PY_SSL_VERSION_SSL2) | |
| ctx = SSL_CTX_new(SSLv2_method()); | |
| #endif | |
| else if (proto_version == PY_SSL_VERSION_TLS) | |
| ctx = SSL_CTX_new(TLS_method()); | |
| else | |
| proto_version = -1; | |
| PySSL_END_ALLOW_THREADS | |
| if (proto_version == -1) { | |
| PyErr_SetString(PyExc_ValueError, | |
| "invalid protocol version"); | |
| return NULL; | |
| } | |
| if (ctx == NULL) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "failed to allocate SSL context"); | |
| return NULL; | |
| } | |
| assert(type != NULL && type->tp_alloc != NULL); | |
| self = (PySSLContext *) type->tp_alloc(type, 0); | |
| if (self == NULL) { | |
| SSL_CTX_free(ctx); | |
| return NULL; | |
| } | |
| self->ctx = ctx; | |
| #ifdef OPENSSL_NPN_NEGOTIATED | |
| self->npn_protocols = NULL; | |
| #endif | |
| #ifdef HAVE_ALPN | |
| self->alpn_protocols = NULL; | |
| #endif | |
| #ifndef OPENSSL_NO_TLSEXT | |
| self->set_hostname = NULL; | |
| #endif | |
| /* Don't check host name by default */ | |
| self->check_hostname = 0; | |
| /* Defaults */ | |
| SSL_CTX_set_verify(self->ctx, SSL_VERIFY_NONE, NULL); | |
| options = SSL_OP_ALL & ~SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS; | |
| if (proto_version != PY_SSL_VERSION_SSL2) | |
| options |= SSL_OP_NO_SSLv2; | |
| if (proto_version != PY_SSL_VERSION_SSL3) | |
| options |= SSL_OP_NO_SSLv3; | |
| SSL_CTX_set_options(self->ctx, options); | |
| #ifndef OPENSSL_NO_ECDH | |
| /* Allow automatic ECDH curve selection (on OpenSSL 1.0.2+), or use | |
| prime256v1 by default. This is Apache mod_ssl's initialization | |
| policy, so we should be safe. OpenSSL 1.1 has it enabled by default. | |
| */ | |
| #if defined(SSL_CTX_set_ecdh_auto) && !defined(OPENSSL_VERSION_1_1) | |
| SSL_CTX_set_ecdh_auto(self->ctx, 1); | |
| #else | |
| { | |
| EC_KEY *key = EC_KEY_new_by_curve_name(NID_X9_62_prime256v1); | |
| SSL_CTX_set_tmp_ecdh(self->ctx, key); | |
| EC_KEY_free(key); | |
| } | |
| #endif | |
| #endif | |
| #define SID_CTX "Python" | |
| SSL_CTX_set_session_id_context(self->ctx, (const unsigned char *) SID_CTX, | |
| sizeof(SID_CTX)); | |
| #undef SID_CTX | |
| #ifdef X509_V_FLAG_TRUSTED_FIRST | |
| { | |
| /* Improve trust chain building when cross-signed intermediate | |
| certificates are present. See https://bugs.python.org/issue23476. */ | |
| X509_STORE *store = SSL_CTX_get_cert_store(self->ctx); | |
| X509_STORE_set_flags(store, X509_V_FLAG_TRUSTED_FIRST); | |
| } | |
| #endif | |
| return (PyObject *)self; | |
| } | |
| static int | |
| context_traverse(PySSLContext *self, visitproc visit, void *arg) | |
| { | |
| #ifndef OPENSSL_NO_TLSEXT | |
| Py_VISIT(self->set_hostname); | |
| #endif | |
| return 0; | |
| } | |
| static int | |
| context_clear(PySSLContext *self) | |
| { | |
| #ifndef OPENSSL_NO_TLSEXT | |
| Py_CLEAR(self->set_hostname); | |
| #endif | |
| return 0; | |
| } | |
| static void | |
| context_dealloc(PySSLContext *self) | |
| { | |
| context_clear(self); | |
| SSL_CTX_free(self->ctx); | |
| #ifdef OPENSSL_NPN_NEGOTIATED | |
| PyMem_FREE(self->npn_protocols); | |
| #endif | |
| #ifdef HAVE_ALPN | |
| PyMem_FREE(self->alpn_protocols); | |
| #endif | |
| Py_TYPE(self)->tp_free(self); | |
| } | |
| static PyObject * | |
| set_ciphers(PySSLContext *self, PyObject *args) | |
| { | |
| int ret; | |
| const char *cipherlist; | |
| if (!PyArg_ParseTuple(args, "s:set_ciphers", &cipherlist)) | |
| return NULL; | |
| ret = SSL_CTX_set_cipher_list(self->ctx, cipherlist); | |
| if (ret == 0) { | |
| /* Clearing the error queue is necessary on some OpenSSL versions, | |
| otherwise the error will be reported again when another SSL call | |
| is done. */ | |
| ERR_clear_error(); | |
| PyErr_SetString(PySSLErrorObject, | |
| "No cipher can be selected."); | |
| return NULL; | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| #ifdef OPENSSL_NPN_NEGOTIATED | |
| static int | |
| do_protocol_selection(int alpn, unsigned char **out, unsigned char *outlen, | |
| const unsigned char *server_protocols, unsigned int server_protocols_len, | |
| const unsigned char *client_protocols, unsigned int client_protocols_len) | |
| { | |
| int ret; | |
| if (client_protocols == NULL) { | |
| client_protocols = (unsigned char *)""; | |
| client_protocols_len = 0; | |
| } | |
| if (server_protocols == NULL) { | |
| server_protocols = (unsigned char *)""; | |
| server_protocols_len = 0; | |
| } | |
| ret = SSL_select_next_proto(out, outlen, | |
| server_protocols, server_protocols_len, | |
| client_protocols, client_protocols_len); | |
| if (alpn && ret != OPENSSL_NPN_NEGOTIATED) | |
| return SSL_TLSEXT_ERR_NOACK; | |
| return SSL_TLSEXT_ERR_OK; | |
| } | |
| /* this callback gets passed to SSL_CTX_set_next_protos_advertise_cb */ | |
| static int | |
| _advertiseNPN_cb(SSL *s, | |
| const unsigned char **data, unsigned int *len, | |
| void *args) | |
| { | |
| PySSLContext *ssl_ctx = (PySSLContext *) args; | |
| if (ssl_ctx->npn_protocols == NULL) { | |
| *data = (unsigned char *)""; | |
| *len = 0; | |
| } else { | |
| *data = ssl_ctx->npn_protocols; | |
| *len = ssl_ctx->npn_protocols_len; | |
| } | |
| return SSL_TLSEXT_ERR_OK; | |
| } | |
| /* this callback gets passed to SSL_CTX_set_next_proto_select_cb */ | |
| static int | |
| _selectNPN_cb(SSL *s, | |
| unsigned char **out, unsigned char *outlen, | |
| const unsigned char *server, unsigned int server_len, | |
| void *args) | |
| { | |
| PySSLContext *ctx = (PySSLContext *)args; | |
| return do_protocol_selection(0, out, outlen, server, server_len, | |
| ctx->npn_protocols, ctx->npn_protocols_len); | |
| } | |
| #endif | |
| static PyObject * | |
| _set_npn_protocols(PySSLContext *self, PyObject *args) | |
| { | |
| #ifdef OPENSSL_NPN_NEGOTIATED | |
| Py_buffer protos; | |
| if (!PyArg_ParseTuple(args, "s*:set_npn_protocols", &protos)) | |
| return NULL; | |
| if (self->npn_protocols != NULL) { | |
| PyMem_Free(self->npn_protocols); | |
| } | |
| self->npn_protocols = PyMem_Malloc(protos.len); | |
| if (self->npn_protocols == NULL) { | |
| PyBuffer_Release(&protos); | |
| return PyErr_NoMemory(); | |
| } | |
| memcpy(self->npn_protocols, protos.buf, protos.len); | |
| self->npn_protocols_len = (int) protos.len; | |
| /* set both server and client callbacks, because the context can | |
| * be used to create both types of sockets */ | |
| SSL_CTX_set_next_protos_advertised_cb(self->ctx, | |
| _advertiseNPN_cb, | |
| self); | |
| SSL_CTX_set_next_proto_select_cb(self->ctx, | |
| _selectNPN_cb, | |
| self); | |
| PyBuffer_Release(&protos); | |
| Py_RETURN_NONE; | |
| #else | |
| PyErr_SetString(PyExc_NotImplementedError, | |
| "The NPN extension requires OpenSSL 1.0.1 or later."); | |
| return NULL; | |
| #endif | |
| } | |
| #ifdef HAVE_ALPN | |
| static int | |
| _selectALPN_cb(SSL *s, | |
| const unsigned char **out, unsigned char *outlen, | |
| const unsigned char *client_protocols, unsigned int client_protocols_len, | |
| void *args) | |
| { | |
| PySSLContext *ctx = (PySSLContext *)args; | |
| return do_protocol_selection(1, (unsigned char **)out, outlen, | |
| ctx->alpn_protocols, ctx->alpn_protocols_len, | |
| client_protocols, client_protocols_len); | |
| } | |
| #endif | |
| static PyObject * | |
| _set_alpn_protocols(PySSLContext *self, PyObject *args) | |
| { | |
| #ifdef HAVE_ALPN | |
| Py_buffer protos; | |
| if (!PyArg_ParseTuple(args, "s*:set_npn_protocols", &protos)) | |
| return NULL; | |
| PyMem_FREE(self->alpn_protocols); | |
| self->alpn_protocols = PyMem_Malloc(protos.len); | |
| if (!self->alpn_protocols) | |
| return PyErr_NoMemory(); | |
| memcpy(self->alpn_protocols, protos.buf, protos.len); | |
| self->alpn_protocols_len = protos.len; | |
| PyBuffer_Release(&protos); | |
| if (SSL_CTX_set_alpn_protos(self->ctx, self->alpn_protocols, self->alpn_protocols_len)) | |
| return PyErr_NoMemory(); | |
| SSL_CTX_set_alpn_select_cb(self->ctx, _selectALPN_cb, self); | |
| PyBuffer_Release(&protos); | |
| Py_RETURN_NONE; | |
| #else | |
| PyErr_SetString(PyExc_NotImplementedError, | |
| "The ALPN extension requires OpenSSL 1.0.2 or later."); | |
| return NULL; | |
| #endif | |
| } | |
| static PyObject * | |
| get_verify_mode(PySSLContext *self, void *c) | |
| { | |
| switch (SSL_CTX_get_verify_mode(self->ctx)) { | |
| case SSL_VERIFY_NONE: | |
| return PyLong_FromLong(PY_SSL_CERT_NONE); | |
| case SSL_VERIFY_PEER: | |
| return PyLong_FromLong(PY_SSL_CERT_OPTIONAL); | |
| case SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT: | |
| return PyLong_FromLong(PY_SSL_CERT_REQUIRED); | |
| } | |
| PyErr_SetString(PySSLErrorObject, | |
| "invalid return value from SSL_CTX_get_verify_mode"); | |
| return NULL; | |
| } | |
| static int | |
| set_verify_mode(PySSLContext *self, PyObject *arg, void *c) | |
| { | |
| int n, mode; | |
| if (!PyArg_Parse(arg, "i", &n)) | |
| return -1; | |
| if (n == PY_SSL_CERT_NONE) | |
| mode = SSL_VERIFY_NONE; | |
| else if (n == PY_SSL_CERT_OPTIONAL) | |
| mode = SSL_VERIFY_PEER; | |
| else if (n == PY_SSL_CERT_REQUIRED) | |
| mode = SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT; | |
| else { | |
| PyErr_SetString(PyExc_ValueError, | |
| "invalid value for verify_mode"); | |
| return -1; | |
| } | |
| if (mode == SSL_VERIFY_NONE && self->check_hostname) { | |
| PyErr_SetString(PyExc_ValueError, | |
| "Cannot set verify_mode to CERT_NONE when " | |
| "check_hostname is enabled."); | |
| return -1; | |
| } | |
| SSL_CTX_set_verify(self->ctx, mode, NULL); | |
| return 0; | |
| } | |
| #ifdef HAVE_OPENSSL_VERIFY_PARAM | |
| static PyObject * | |
| get_verify_flags(PySSLContext *self, void *c) | |
| { | |
| X509_STORE *store; | |
| X509_VERIFY_PARAM *param; | |
| unsigned long flags; | |
| store = SSL_CTX_get_cert_store(self->ctx); | |
| param = X509_STORE_get0_param(store); | |
| flags = X509_VERIFY_PARAM_get_flags(param); | |
| return PyLong_FromUnsignedLong(flags); | |
| } | |
| static int | |
| set_verify_flags(PySSLContext *self, PyObject *arg, void *c) | |
| { | |
| X509_STORE *store; | |
| X509_VERIFY_PARAM *param; | |
| unsigned long new_flags, flags, set, clear; | |
| if (!PyArg_Parse(arg, "k", &new_flags)) | |
| return -1; | |
| store = SSL_CTX_get_cert_store(self->ctx); | |
| param = X509_STORE_get0_param(store); | |
| flags = X509_VERIFY_PARAM_get_flags(param); | |
| clear = flags & ~new_flags; | |
| set = ~flags & new_flags; | |
| if (clear) { | |
| if (!X509_VERIFY_PARAM_clear_flags(param, clear)) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| return -1; | |
| } | |
| } | |
| if (set) { | |
| if (!X509_VERIFY_PARAM_set_flags(param, set)) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| return -1; | |
| } | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static PyObject * | |
| get_options(PySSLContext *self, void *c) | |
| { | |
| return PyLong_FromLong(SSL_CTX_get_options(self->ctx)); | |
| } | |
| static int | |
| set_options(PySSLContext *self, PyObject *arg, void *c) | |
| { | |
| long new_opts, opts, set, clear; | |
| if (!PyArg_Parse(arg, "l", &new_opts)) | |
| return -1; | |
| opts = SSL_CTX_get_options(self->ctx); | |
| clear = opts & ~new_opts; | |
| set = ~opts & new_opts; | |
| if (clear) { | |
| #ifdef HAVE_SSL_CTX_CLEAR_OPTIONS | |
| SSL_CTX_clear_options(self->ctx, clear); | |
| #else | |
| PyErr_SetString(PyExc_ValueError, | |
| "can't clear options before OpenSSL 0.9.8m"); | |
| return -1; | |
| #endif | |
| } | |
| if (set) | |
| SSL_CTX_set_options(self->ctx, set); | |
| return 0; | |
| } | |
| static PyObject * | |
| get_check_hostname(PySSLContext *self, void *c) | |
| { | |
| return PyBool_FromLong(self->check_hostname); | |
| } | |
| static int | |
| set_check_hostname(PySSLContext *self, PyObject *arg, void *c) | |
| { | |
| PyObject *py_check_hostname; | |
| int check_hostname; | |
| if (!PyArg_Parse(arg, "O", &py_check_hostname)) | |
| return -1; | |
| check_hostname = PyObject_IsTrue(py_check_hostname); | |
| if (check_hostname < 0) | |
| return -1; | |
| if (check_hostname && | |
| SSL_CTX_get_verify_mode(self->ctx) == SSL_VERIFY_NONE) { | |
| PyErr_SetString(PyExc_ValueError, | |
| "check_hostname needs a SSL context with either " | |
| "CERT_OPTIONAL or CERT_REQUIRED"); | |
| return -1; | |
| } | |
| self->check_hostname = check_hostname; | |
| return 0; | |
| } | |
| typedef struct { | |
| PyThreadState *thread_state; | |
| PyObject *callable; | |
| char *password; | |
| int size; | |
| int error; | |
| } _PySSLPasswordInfo; | |
| static int | |
| _pwinfo_set(_PySSLPasswordInfo *pw_info, PyObject* password, | |
| const char *bad_type_error) | |
| { | |
| /* Set the password and size fields of a _PySSLPasswordInfo struct | |
| from a unicode, bytes, or byte array object. | |
| The password field will be dynamically allocated and must be freed | |
| by the caller */ | |
| PyObject *password_bytes = NULL; | |
| const char *data = NULL; | |
| Py_ssize_t size; | |
| if (PyUnicode_Check(password)) { | |
| password_bytes = PyUnicode_AsEncodedString(password, NULL, NULL); | |
| if (!password_bytes) { | |
| goto error; | |
| } | |
| data = PyBytes_AS_STRING(password_bytes); | |
| size = PyBytes_GET_SIZE(password_bytes); | |
| } else if (PyBytes_Check(password)) { | |
| data = PyBytes_AS_STRING(password); | |
| size = PyBytes_GET_SIZE(password); | |
| } else if (PyByteArray_Check(password)) { | |
| data = PyByteArray_AS_STRING(password); | |
| size = PyByteArray_GET_SIZE(password); | |
| } else { | |
| PyErr_SetString(PyExc_TypeError, bad_type_error); | |
| goto error; | |
| } | |
| if (size > (Py_ssize_t)INT_MAX) { | |
| PyErr_Format(PyExc_ValueError, | |
| "password cannot be longer than %d bytes", INT_MAX); | |
| goto error; | |
| } | |
| PyMem_Free(pw_info->password); | |
| pw_info->password = PyMem_Malloc(size); | |
| if (!pw_info->password) { | |
| PyErr_SetString(PyExc_MemoryError, | |
| "unable to allocate password buffer"); | |
| goto error; | |
| } | |
| memcpy(pw_info->password, data, size); | |
| pw_info->size = (int)size; | |
| Py_XDECREF(password_bytes); | |
| return 1; | |
| error: | |
| Py_XDECREF(password_bytes); | |
| return 0; | |
| } | |
| static int | |
| _password_callback(char *buf, int size, int rwflag, void *userdata) | |
| { | |
| _PySSLPasswordInfo *pw_info = (_PySSLPasswordInfo*) userdata; | |
| PyObject *fn_ret = NULL; | |
| PySSL_END_ALLOW_THREADS_S(pw_info->thread_state); | |
| if (pw_info->callable) { | |
| fn_ret = PyObject_CallFunctionObjArgs(pw_info->callable, NULL); | |
| if (!fn_ret) { | |
| /* TODO: It would be nice to move _ctypes_add_traceback() into the | |
| core python API, so we could use it to add a frame here */ | |
| goto error; | |
| } | |
| if (!_pwinfo_set(pw_info, fn_ret, | |
| "password callback must return a string")) { | |
| goto error; | |
| } | |
| Py_CLEAR(fn_ret); | |
| } | |
| if (pw_info->size > size) { | |
| PyErr_Format(PyExc_ValueError, | |
| "password cannot be longer than %d bytes", size); | |
| goto error; | |
| } | |
| PySSL_BEGIN_ALLOW_THREADS_S(pw_info->thread_state); | |
| memcpy(buf, pw_info->password, pw_info->size); | |
| return pw_info->size; | |
| error: | |
| Py_XDECREF(fn_ret); | |
| PySSL_BEGIN_ALLOW_THREADS_S(pw_info->thread_state); | |
| pw_info->error = 1; | |
| return -1; | |
| } | |
| static PyObject * | |
| load_cert_chain(PySSLContext *self, PyObject *args, PyObject *kwds) | |
| { | |
| char *kwlist[] = {"certfile", "keyfile", "password", NULL}; | |
| PyObject *keyfile = NULL, *keyfile_bytes = NULL, *password = NULL; | |
| char *certfile_bytes = NULL; | |
| pem_password_cb *orig_passwd_cb = SSL_CTX_get_default_passwd_cb(self->ctx); | |
| void *orig_passwd_userdata = SSL_CTX_get_default_passwd_cb_userdata(self->ctx); | |
| _PySSLPasswordInfo pw_info = { NULL, NULL, NULL, 0, 0 }; | |
| int r; | |
| errno = 0; | |
| ERR_clear_error(); | |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, | |
| "et|OO:load_cert_chain", kwlist, | |
| Py_FileSystemDefaultEncoding, &certfile_bytes, | |
| &keyfile, &password)) | |
| return NULL; | |
| if (keyfile && keyfile != Py_None) { | |
| if (PyString_Check(keyfile)) { | |
| Py_INCREF(keyfile); | |
| keyfile_bytes = keyfile; | |
| } else { | |
| PyObject *u = PyUnicode_FromObject(keyfile); | |
| if (!u) | |
| goto error; | |
| keyfile_bytes = PyUnicode_AsEncodedString( | |
| u, Py_FileSystemDefaultEncoding, NULL); | |
| Py_DECREF(u); | |
| if (!keyfile_bytes) | |
| goto error; | |
| } | |
| } | |
| if (password && password != Py_None) { | |
| if (PyCallable_Check(password)) { | |
| pw_info.callable = password; | |
| } else if (!_pwinfo_set(&pw_info, password, | |
| "password should be a string or callable")) { | |
| goto error; | |
| } | |
| SSL_CTX_set_default_passwd_cb(self->ctx, _password_callback); | |
| SSL_CTX_set_default_passwd_cb_userdata(self->ctx, &pw_info); | |
| } | |
| PySSL_BEGIN_ALLOW_THREADS_S(pw_info.thread_state); | |
| r = SSL_CTX_use_certificate_chain_file(self->ctx, certfile_bytes); | |
| PySSL_END_ALLOW_THREADS_S(pw_info.thread_state); | |
| if (r != 1) { | |
| if (pw_info.error) { | |
| ERR_clear_error(); | |
| /* the password callback has already set the error information */ | |
| } | |
| else if (errno != 0) { | |
| ERR_clear_error(); | |
| PyErr_SetFromErrno(PyExc_IOError); | |
| } | |
| else { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| } | |
| goto error; | |
| } | |
| PySSL_BEGIN_ALLOW_THREADS_S(pw_info.thread_state); | |
| r = SSL_CTX_use_PrivateKey_file(self->ctx, | |
| keyfile_bytes ? PyBytes_AS_STRING(keyfile_bytes) : certfile_bytes, | |
| SSL_FILETYPE_PEM); | |
| PySSL_END_ALLOW_THREADS_S(pw_info.thread_state); | |
| if (r != 1) { | |
| if (pw_info.error) { | |
| ERR_clear_error(); | |
| /* the password callback has already set the error information */ | |
| } | |
| else if (errno != 0) { | |
| ERR_clear_error(); | |
| PyErr_SetFromErrno(PyExc_IOError); | |
| } | |
| else { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| } | |
| goto error; | |
| } | |
| PySSL_BEGIN_ALLOW_THREADS_S(pw_info.thread_state); | |
| r = SSL_CTX_check_private_key(self->ctx); | |
| PySSL_END_ALLOW_THREADS_S(pw_info.thread_state); | |
| if (r != 1) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| goto error; | |
| } | |
| SSL_CTX_set_default_passwd_cb(self->ctx, orig_passwd_cb); | |
| SSL_CTX_set_default_passwd_cb_userdata(self->ctx, orig_passwd_userdata); | |
| Py_XDECREF(keyfile_bytes); | |
| PyMem_Free(pw_info.password); | |
| PyMem_Free(certfile_bytes); | |
| Py_RETURN_NONE; | |
| error: | |
| SSL_CTX_set_default_passwd_cb(self->ctx, orig_passwd_cb); | |
| SSL_CTX_set_default_passwd_cb_userdata(self->ctx, orig_passwd_userdata); | |
| Py_XDECREF(keyfile_bytes); | |
| PyMem_Free(pw_info.password); | |
| PyMem_Free(certfile_bytes); | |
| return NULL; | |
| } | |
| /* internal helper function, returns -1 on error | |
| */ | |
| static int | |
| _add_ca_certs(PySSLContext *self, void *data, Py_ssize_t len, | |
| int filetype) | |
| { | |
| BIO *biobuf = NULL; | |
| X509_STORE *store; | |
| int retval = 0, err, loaded = 0; | |
| assert(filetype == SSL_FILETYPE_ASN1 || filetype == SSL_FILETYPE_PEM); | |
| if (len <= 0) { | |
| PyErr_SetString(PyExc_ValueError, | |
| "Empty certificate data"); | |
| return -1; | |
| } else if (len > INT_MAX) { | |
| PyErr_SetString(PyExc_OverflowError, | |
| "Certificate data is too long."); | |
| return -1; | |
| } | |
| biobuf = BIO_new_mem_buf(data, (int)len); | |
| if (biobuf == NULL) { | |
| _setSSLError("Can't allocate buffer", 0, __FILE__, __LINE__); | |
| return -1; | |
| } | |
| store = SSL_CTX_get_cert_store(self->ctx); | |
| assert(store != NULL); | |
| while (1) { | |
| X509 *cert = NULL; | |
| int r; | |
| if (filetype == SSL_FILETYPE_ASN1) { | |
| cert = d2i_X509_bio(biobuf, NULL); | |
| } else { | |
| cert = PEM_read_bio_X509(biobuf, NULL, | |
| SSL_CTX_get_default_passwd_cb(self->ctx), | |
| SSL_CTX_get_default_passwd_cb_userdata(self->ctx) | |
| ); | |
| } | |
| if (cert == NULL) { | |
| break; | |
| } | |
| r = X509_STORE_add_cert(store, cert); | |
| X509_free(cert); | |
| if (!r) { | |
| err = ERR_peek_last_error(); | |
| if ((ERR_GET_LIB(err) == ERR_LIB_X509) && | |
| (ERR_GET_REASON(err) == X509_R_CERT_ALREADY_IN_HASH_TABLE)) { | |
| /* cert already in hash table, not an error */ | |
| ERR_clear_error(); | |
| } else { | |
| break; | |
| } | |
| } | |
| loaded++; | |
| } | |
| err = ERR_peek_last_error(); | |
| if ((filetype == SSL_FILETYPE_ASN1) && | |
| (loaded > 0) && | |
| (ERR_GET_LIB(err) == ERR_LIB_ASN1) && | |
| (ERR_GET_REASON(err) == ASN1_R_HEADER_TOO_LONG)) { | |
| /* EOF ASN1 file, not an error */ | |
| ERR_clear_error(); | |
| retval = 0; | |
| } else if ((filetype == SSL_FILETYPE_PEM) && | |
| (loaded > 0) && | |
| (ERR_GET_LIB(err) == ERR_LIB_PEM) && | |
| (ERR_GET_REASON(err) == PEM_R_NO_START_LINE)) { | |
| /* EOF PEM file, not an error */ | |
| ERR_clear_error(); | |
| retval = 0; | |
| } else { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| retval = -1; | |
| } | |
| BIO_free(biobuf); | |
| return retval; | |
| } | |
| static PyObject * | |
| load_verify_locations(PySSLContext *self, PyObject *args, PyObject *kwds) | |
| { | |
| char *kwlist[] = {"cafile", "capath", "cadata", NULL}; | |
| PyObject *cadata = NULL, *cafile = NULL, *capath = NULL; | |
| PyObject *cafile_bytes = NULL, *capath_bytes = NULL; | |
| const char *cafile_buf = NULL, *capath_buf = NULL; | |
| int r = 0, ok = 1; | |
| errno = 0; | |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, | |
| "|OOO:load_verify_locations", kwlist, | |
| &cafile, &capath, &cadata)) | |
| return NULL; | |
| if (cafile == Py_None) | |
| cafile = NULL; | |
| if (capath == Py_None) | |
| capath = NULL; | |
| if (cadata == Py_None) | |
| cadata = NULL; | |
| if (cafile == NULL && capath == NULL && cadata == NULL) { | |
| PyErr_SetString(PyExc_TypeError, | |
| "cafile, capath and cadata cannot be all omitted"); | |
| goto error; | |
| } | |
| if (cafile) { | |
| if (PyString_Check(cafile)) { | |
| Py_INCREF(cafile); | |
| cafile_bytes = cafile; | |
| } else { | |
| PyObject *u = PyUnicode_FromObject(cafile); | |
| if (!u) | |
| goto error; | |
| cafile_bytes = PyUnicode_AsEncodedString( | |
| u, Py_FileSystemDefaultEncoding, NULL); | |
| Py_DECREF(u); | |
| if (!cafile_bytes) | |
| goto error; | |
| } | |
| } | |
| if (capath) { | |
| if (PyString_Check(capath)) { | |
| Py_INCREF(capath); | |
| capath_bytes = capath; | |
| } else { | |
| PyObject *u = PyUnicode_FromObject(capath); | |
| if (!u) | |
| goto error; | |
| capath_bytes = PyUnicode_AsEncodedString( | |
| u, Py_FileSystemDefaultEncoding, NULL); | |
| Py_DECREF(u); | |
| if (!capath_bytes) | |
| goto error; | |
| } | |
| } | |
| /* validata cadata type and load cadata */ | |
| if (cadata) { | |
| Py_buffer buf; | |
| PyObject *cadata_ascii = NULL; | |
| if (!PyUnicode_Check(cadata) && PyObject_GetBuffer(cadata, &buf, PyBUF_SIMPLE) == 0) { | |
| if (!PyBuffer_IsContiguous(&buf, 'C') || buf.ndim > 1) { | |
| PyBuffer_Release(&buf); | |
| PyErr_SetString(PyExc_TypeError, | |
| "cadata should be a contiguous buffer with " | |
| "a single dimension"); | |
| goto error; | |
| } | |
| r = _add_ca_certs(self, buf.buf, buf.len, SSL_FILETYPE_ASN1); | |
| PyBuffer_Release(&buf); | |
| if (r == -1) { | |
| goto error; | |
| } | |
| } else { | |
| PyErr_Clear(); | |
| cadata_ascii = PyUnicode_AsASCIIString(cadata); | |
| if (cadata_ascii == NULL) { | |
| PyErr_SetString(PyExc_TypeError, | |
| "cadata should be an ASCII string or a " | |
| "bytes-like object"); | |
| goto error; | |
| } | |
| r = _add_ca_certs(self, | |
| PyBytes_AS_STRING(cadata_ascii), | |
| PyBytes_GET_SIZE(cadata_ascii), | |
| SSL_FILETYPE_PEM); | |
| Py_DECREF(cadata_ascii); | |
| if (r == -1) { | |
| goto error; | |
| } | |
| } | |
| } | |
| /* load cafile or capath */ | |
| if (cafile_bytes || capath_bytes) { | |
| if (cafile) | |
| cafile_buf = PyBytes_AS_STRING(cafile_bytes); | |
| if (capath) | |
| capath_buf = PyBytes_AS_STRING(capath_bytes); | |
| PySSL_BEGIN_ALLOW_THREADS | |
| r = SSL_CTX_load_verify_locations( | |
| self->ctx, | |
| cafile_buf, | |
| capath_buf); | |
| PySSL_END_ALLOW_THREADS | |
| if (r != 1) { | |
| ok = 0; | |
| if (errno != 0) { | |
| ERR_clear_error(); | |
| PyErr_SetFromErrno(PyExc_IOError); | |
| } | |
| else { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| } | |
| goto error; | |
| } | |
| } | |
| goto end; | |
| error: | |
| ok = 0; | |
| end: | |
| Py_XDECREF(cafile_bytes); | |
| Py_XDECREF(capath_bytes); | |
| if (ok) { | |
| Py_RETURN_NONE; | |
| } else { | |
| return NULL; | |
| } | |
| } | |
| static PyObject * | |
| load_dh_params(PySSLContext *self, PyObject *filepath) | |
| { | |
| BIO *bio; | |
| DH *dh; | |
| char *path = PyBytes_AsString(filepath); | |
| if (!path) { | |
| return NULL; | |
| } | |
| bio = BIO_new_file(path, "r"); | |
| if (bio == NULL) { | |
| ERR_clear_error(); | |
| PyErr_SetFromErrnoWithFilenameObject(PyExc_IOError, filepath); | |
| return NULL; | |
| } | |
| errno = 0; | |
| PySSL_BEGIN_ALLOW_THREADS | |
| dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL); | |
| BIO_free(bio); | |
| PySSL_END_ALLOW_THREADS | |
| if (dh == NULL) { | |
| if (errno != 0) { | |
| ERR_clear_error(); | |
| PyErr_SetFromErrnoWithFilenameObject(PyExc_OSError, filepath); | |
| } | |
| else { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| } | |
| return NULL; | |
| } | |
| if (SSL_CTX_set_tmp_dh(self->ctx, dh) == 0) | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| DH_free(dh); | |
| Py_RETURN_NONE; | |
| } | |
| static PyObject * | |
| context_wrap_socket(PySSLContext *self, PyObject *args, PyObject *kwds) | |
| { | |
| char *kwlist[] = {"sock", "server_side", "server_hostname", "ssl_sock", NULL}; | |
| PySocketSockObject *sock; | |
| int server_side = 0; | |
| char *hostname = NULL; | |
| PyObject *hostname_obj, *ssl_sock = Py_None, *res; | |
| /* server_hostname is either None (or absent), or to be encoded | |
| using the idna encoding. */ | |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "O!i|O!O:_wrap_socket", kwlist, | |
| PySocketModule.Sock_Type, | |
| &sock, &server_side, | |
| Py_TYPE(Py_None), &hostname_obj, | |
| &ssl_sock)) { | |
| PyErr_Clear(); | |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "O!iet|O:_wrap_socket", kwlist, | |
| PySocketModule.Sock_Type, | |
| &sock, &server_side, | |
| "idna", &hostname, &ssl_sock)) | |
| return NULL; | |
| } | |
| res = (PyObject *) newPySSLSocket(self, sock, server_side, | |
| hostname, ssl_sock); | |
| if (hostname != NULL) | |
| PyMem_Free(hostname); | |
| return res; | |
| } | |
| static PyObject * | |
| session_stats(PySSLContext *self, PyObject *unused) | |
| { | |
| int r; | |
| PyObject *value, *stats = PyDict_New(); | |
| if (!stats) | |
| return NULL; | |
| #define ADD_STATS(SSL_NAME, KEY_NAME) \ | |
| value = PyLong_FromLong(SSL_CTX_sess_ ## SSL_NAME (self->ctx)); \ | |
| if (value == NULL) \ | |
| goto error; \ | |
| r = PyDict_SetItemString(stats, KEY_NAME, value); \ | |
| Py_DECREF(value); \ | |
| if (r < 0) \ | |
| goto error; | |
| ADD_STATS(number, "number"); | |
| ADD_STATS(connect, "connect"); | |
| ADD_STATS(connect_good, "connect_good"); | |
| ADD_STATS(connect_renegotiate, "connect_renegotiate"); | |
| ADD_STATS(accept, "accept"); | |
| ADD_STATS(accept_good, "accept_good"); | |
| ADD_STATS(accept_renegotiate, "accept_renegotiate"); | |
| ADD_STATS(accept, "accept"); | |
| ADD_STATS(hits, "hits"); | |
| ADD_STATS(misses, "misses"); | |
| ADD_STATS(timeouts, "timeouts"); | |
| ADD_STATS(cache_full, "cache_full"); | |
| #undef ADD_STATS | |
| return stats; | |
| error: | |
| Py_DECREF(stats); | |
| return NULL; | |
| } | |
| static PyObject * | |
| set_default_verify_paths(PySSLContext *self, PyObject *unused) | |
| { | |
| if (!SSL_CTX_set_default_verify_paths(self->ctx)) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| return NULL; | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| #ifndef OPENSSL_NO_ECDH | |
| static PyObject * | |
| set_ecdh_curve(PySSLContext *self, PyObject *name) | |
| { | |
| char *name_bytes; | |
| int nid; | |
| EC_KEY *key; | |
| name_bytes = PyBytes_AsString(name); | |
| if (!name_bytes) { | |
| return NULL; | |
| } | |
| nid = OBJ_sn2nid(name_bytes); | |
| if (nid == 0) { | |
| PyObject *r = PyObject_Repr(name); | |
| if (!r) | |
| return NULL; | |
| PyErr_Format(PyExc_ValueError, | |
| "unknown elliptic curve name %s", PyString_AS_STRING(r)); | |
| Py_DECREF(r); | |
| return NULL; | |
| } | |
| key = EC_KEY_new_by_curve_name(nid); | |
| if (key == NULL) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| return NULL; | |
| } | |
| SSL_CTX_set_tmp_ecdh(self->ctx, key); | |
| EC_KEY_free(key); | |
| Py_RETURN_NONE; | |
| } | |
| #endif | |
| #if HAVE_SNI && !defined(OPENSSL_NO_TLSEXT) | |
| static int | |
| _servername_callback(SSL *s, int *al, void *args) | |
| { | |
| int ret; | |
| PySSLContext *ssl_ctx = (PySSLContext *) args; | |
| PySSLSocket *ssl; | |
| PyObject *servername_o; | |
| PyObject *servername_idna; | |
| PyObject *result; | |
| /* The high-level ssl.SSLSocket object */ | |
| PyObject *ssl_socket; | |
| const char *servername = SSL_get_servername(s, TLSEXT_NAMETYPE_host_name); | |
| #ifdef WITH_THREAD | |
| PyGILState_STATE gstate = PyGILState_Ensure(); | |
| #endif | |
| if (ssl_ctx->set_hostname == NULL) { | |
| /* remove race condition in this the call back while if removing the | |
| * callback is in progress */ | |
| #ifdef WITH_THREAD | |
| PyGILState_Release(gstate); | |
| #endif | |
| return SSL_TLSEXT_ERR_OK; | |
| } | |
| ssl = SSL_get_app_data(s); | |
| assert(PySSLSocket_Check(ssl)); | |
| if (ssl->ssl_sock == NULL) { | |
| ssl_socket = Py_None; | |
| } else { | |
| ssl_socket = PyWeakref_GetObject(ssl->ssl_sock); | |
| Py_INCREF(ssl_socket); | |
| } | |
| if (ssl_socket == Py_None) { | |
| goto error; | |
| } | |
| if (servername == NULL) { | |
| result = PyObject_CallFunctionObjArgs(ssl_ctx->set_hostname, ssl_socket, | |
| Py_None, ssl_ctx, NULL); | |
| } | |
| else { | |
| servername_o = PyBytes_FromString(servername); | |
| if (servername_o == NULL) { | |
| PyErr_WriteUnraisable((PyObject *) ssl_ctx); | |
| goto error; | |
| } | |
| servername_idna = PyUnicode_FromEncodedObject(servername_o, "idna", NULL); | |
| if (servername_idna == NULL) { | |
| PyErr_WriteUnraisable(servername_o); | |
| Py_DECREF(servername_o); | |
| goto error; | |
| } | |
| Py_DECREF(servername_o); | |
| result = PyObject_CallFunctionObjArgs(ssl_ctx->set_hostname, ssl_socket, | |
| servername_idna, ssl_ctx, NULL); | |
| Py_DECREF(servername_idna); | |
| } | |
| Py_DECREF(ssl_socket); | |
| if (result == NULL) { | |
| PyErr_WriteUnraisable(ssl_ctx->set_hostname); | |
| *al = SSL_AD_HANDSHAKE_FAILURE; | |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; | |
| } | |
| else { | |
| if (result != Py_None) { | |
| *al = (int) PyLong_AsLong(result); | |
| if (PyErr_Occurred()) { | |
| PyErr_WriteUnraisable(result); | |
| *al = SSL_AD_INTERNAL_ERROR; | |
| } | |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; | |
| } | |
| else { | |
| ret = SSL_TLSEXT_ERR_OK; | |
| } | |
| Py_DECREF(result); | |
| } | |
| #ifdef WITH_THREAD | |
| PyGILState_Release(gstate); | |
| #endif | |
| return ret; | |
| error: | |
| Py_DECREF(ssl_socket); | |
| *al = SSL_AD_INTERNAL_ERROR; | |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; | |
| #ifdef WITH_THREAD | |
| PyGILState_Release(gstate); | |
| #endif | |
| return ret; | |
| } | |
| #endif | |
| PyDoc_STRVAR(PySSL_set_servername_callback_doc, | |
| "set_servername_callback(method)\n\ | |
| \n\ | |
| This sets a callback that will be called when a server name is provided by\n\ | |
| the SSL/TLS client in the SNI extension.\n\ | |
| \n\ | |
| If the argument is None then the callback is disabled. The method is called\n\ | |
| with the SSLSocket, the server name as a string, and the SSLContext object.\n\ | |
| See RFC 6066 for details of the SNI extension."); | |
| static PyObject * | |
| set_servername_callback(PySSLContext *self, PyObject *args) | |
| { | |
| #if HAVE_SNI && !defined(OPENSSL_NO_TLSEXT) | |
| PyObject *cb; | |
| if (!PyArg_ParseTuple(args, "O", &cb)) | |
| return NULL; | |
| Py_CLEAR(self->set_hostname); | |
| if (cb == Py_None) { | |
| SSL_CTX_set_tlsext_servername_callback(self->ctx, NULL); | |
| } | |
| else { | |
| if (!PyCallable_Check(cb)) { | |
| SSL_CTX_set_tlsext_servername_callback(self->ctx, NULL); | |
| PyErr_SetString(PyExc_TypeError, | |
| "not a callable object"); | |
| return NULL; | |
| } | |
| Py_INCREF(cb); | |
| self->set_hostname = cb; | |
| SSL_CTX_set_tlsext_servername_callback(self->ctx, _servername_callback); | |
| SSL_CTX_set_tlsext_servername_arg(self->ctx, self); | |
| } | |
| Py_RETURN_NONE; | |
| #else | |
| PyErr_SetString(PyExc_NotImplementedError, | |
| "The TLS extension servername callback, " | |
| "SSL_CTX_set_tlsext_servername_callback, " | |
| "is not in the current OpenSSL library."); | |
| return NULL; | |
| #endif | |
| } | |
| PyDoc_STRVAR(PySSL_get_stats_doc, | |
| "cert_store_stats() -> {'crl': int, 'x509_ca': int, 'x509': int}\n\ | |
| \n\ | |
| Returns quantities of loaded X.509 certificates. X.509 certificates with a\n\ | |
| CA extension and certificate revocation lists inside the context's cert\n\ | |
| store.\n\ | |
| NOTE: Certificates in a capath directory aren't loaded unless they have\n\ | |
| been used at least once."); | |
| static PyObject * | |
| cert_store_stats(PySSLContext *self) | |
| { | |
| X509_STORE *store; | |
| STACK_OF(X509_OBJECT) *objs; | |
| X509_OBJECT *obj; | |
| int x509 = 0, crl = 0, ca = 0, i; | |
| store = SSL_CTX_get_cert_store(self->ctx); | |
| objs = X509_STORE_get0_objects(store); | |
| for (i = 0; i < sk_X509_OBJECT_num(objs); i++) { | |
| obj = sk_X509_OBJECT_value(objs, i); | |
| switch (X509_OBJECT_get_type(obj)) { | |
| case X509_LU_X509: | |
| x509++; | |
| if (X509_check_ca(X509_OBJECT_get0_X509(obj))) { | |
| ca++; | |
| } | |
| break; | |
| case X509_LU_CRL: | |
| crl++; | |
| break; | |
| default: | |
| /* Ignore X509_LU_FAIL, X509_LU_RETRY, X509_LU_PKEY. | |
| * As far as I can tell they are internal states and never | |
| * stored in a cert store */ | |
| break; | |
| } | |
| } | |
| return Py_BuildValue("{sisisi}", "x509", x509, "crl", crl, | |
| "x509_ca", ca); | |
| } | |
| PyDoc_STRVAR(PySSL_get_ca_certs_doc, | |
| "get_ca_certs(binary_form=False) -> list of loaded certificate\n\ | |
| \n\ | |
| Returns a list of dicts with information of loaded CA certs. If the\n\ | |
| optional argument is True, returns a DER-encoded copy of the CA certificate.\n\ | |
| NOTE: Certificates in a capath directory aren't loaded unless they have\n\ | |
| been used at least once."); | |
| static PyObject * | |
| get_ca_certs(PySSLContext *self, PyObject *args, PyObject *kwds) | |
| { | |
| char *kwlist[] = {"binary_form", NULL}; | |
| X509_STORE *store; | |
| PyObject *ci = NULL, *rlist = NULL, *py_binary_mode = Py_False; | |
| STACK_OF(X509_OBJECT) *objs; | |
| int i; | |
| int binary_mode = 0; | |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "|O:get_ca_certs", | |
| kwlist, &py_binary_mode)) { | |
| return NULL; | |
| } | |
| binary_mode = PyObject_IsTrue(py_binary_mode); | |
| if (binary_mode < 0) { | |
| return NULL; | |
| } | |
| if ((rlist = PyList_New(0)) == NULL) { | |
| return NULL; | |
| } | |
| store = SSL_CTX_get_cert_store(self->ctx); | |
| objs = X509_STORE_get0_objects(store); | |
| for (i = 0; i < sk_X509_OBJECT_num(objs); i++) { | |
| X509_OBJECT *obj; | |
| X509 *cert; | |
| obj = sk_X509_OBJECT_value(objs, i); | |
| if (X509_OBJECT_get_type(obj) != X509_LU_X509) { | |
| /* not a x509 cert */ | |
| continue; | |
| } | |
| /* CA for any purpose */ | |
| cert = X509_OBJECT_get0_X509(obj); | |
| if (!X509_check_ca(cert)) { | |
| continue; | |
| } | |
| if (binary_mode) { | |
| ci = _certificate_to_der(cert); | |
| } else { | |
| ci = _decode_certificate(cert); | |
| } | |
| if (ci == NULL) { | |
| goto error; | |
| } | |
| if (PyList_Append(rlist, ci) == -1) { | |
| goto error; | |
| } | |
| Py_CLEAR(ci); | |
| } | |
| return rlist; | |
| error: | |
| Py_XDECREF(ci); | |
| Py_XDECREF(rlist); | |
| return NULL; | |
| } | |
| static PyGetSetDef context_getsetlist[] = { | |
| {"check_hostname", (getter) get_check_hostname, | |
| (setter) set_check_hostname, NULL}, | |
| {"options", (getter) get_options, | |
| (setter) set_options, NULL}, | |
| #ifdef HAVE_OPENSSL_VERIFY_PARAM | |
| {"verify_flags", (getter) get_verify_flags, | |
| (setter) set_verify_flags, NULL}, | |
| #endif | |
| {"verify_mode", (getter) get_verify_mode, | |
| (setter) set_verify_mode, NULL}, | |
| {NULL}, /* sentinel */ | |
| }; | |
| static struct PyMethodDef context_methods[] = { | |
| {"_wrap_socket", (PyCFunction) context_wrap_socket, | |
| METH_VARARGS | METH_KEYWORDS, NULL}, | |
| {"set_ciphers", (PyCFunction) set_ciphers, | |
| METH_VARARGS, NULL}, | |
| {"_set_alpn_protocols", (PyCFunction) _set_alpn_protocols, | |
| METH_VARARGS, NULL}, | |
| {"_set_npn_protocols", (PyCFunction) _set_npn_protocols, | |
| METH_VARARGS, NULL}, | |
| {"load_cert_chain", (PyCFunction) load_cert_chain, | |
| METH_VARARGS | METH_KEYWORDS, NULL}, | |
| {"load_dh_params", (PyCFunction) load_dh_params, | |
| METH_O, NULL}, | |
| {"load_verify_locations", (PyCFunction) load_verify_locations, | |
| METH_VARARGS | METH_KEYWORDS, NULL}, | |
| {"session_stats", (PyCFunction) session_stats, | |
| METH_NOARGS, NULL}, | |
| {"set_default_verify_paths", (PyCFunction) set_default_verify_paths, | |
| METH_NOARGS, NULL}, | |
| #ifndef OPENSSL_NO_ECDH | |
| {"set_ecdh_curve", (PyCFunction) set_ecdh_curve, | |
| METH_O, NULL}, | |
| #endif | |
| {"set_servername_callback", (PyCFunction) set_servername_callback, | |
| METH_VARARGS, PySSL_set_servername_callback_doc}, | |
| {"cert_store_stats", (PyCFunction) cert_store_stats, | |
| METH_NOARGS, PySSL_get_stats_doc}, | |
| {"get_ca_certs", (PyCFunction) get_ca_certs, | |
| METH_VARARGS | METH_KEYWORDS, PySSL_get_ca_certs_doc}, | |
| {NULL, NULL} /* sentinel */ | |
| }; | |
| static PyTypeObject PySSLContext_Type = { | |
| PyVarObject_HEAD_INIT(NULL, 0) | |
| "_ssl._SSLContext", /*tp_name*/ | |
| sizeof(PySSLContext), /*tp_basicsize*/ | |
| 0, /*tp_itemsize*/ | |
| (destructor)context_dealloc, /*tp_dealloc*/ | |
| 0, /*tp_print*/ | |
| 0, /*tp_getattr*/ | |
| 0, /*tp_setattr*/ | |
| 0, /*tp_reserved*/ | |
| 0, /*tp_repr*/ | |
| 0, /*tp_as_number*/ | |
| 0, /*tp_as_sequence*/ | |
| 0, /*tp_as_mapping*/ | |
| 0, /*tp_hash*/ | |
| 0, /*tp_call*/ | |
| 0, /*tp_str*/ | |
| 0, /*tp_getattro*/ | |
| 0, /*tp_setattro*/ | |
| 0, /*tp_as_buffer*/ | |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | Py_TPFLAGS_HAVE_GC, /*tp_flags*/ | |
| 0, /*tp_doc*/ | |
| (traverseproc) context_traverse, /*tp_traverse*/ | |
| (inquiry) context_clear, /*tp_clear*/ | |
| 0, /*tp_richcompare*/ | |
| 0, /*tp_weaklistoffset*/ | |
| 0, /*tp_iter*/ | |
| 0, /*tp_iternext*/ | |
| context_methods, /*tp_methods*/ | |
| 0, /*tp_members*/ | |
| context_getsetlist, /*tp_getset*/ | |
| 0, /*tp_base*/ | |
| 0, /*tp_dict*/ | |
| 0, /*tp_descr_get*/ | |
| 0, /*tp_descr_set*/ | |
| 0, /*tp_dictoffset*/ | |
| 0, /*tp_init*/ | |
| 0, /*tp_alloc*/ | |
| context_new, /*tp_new*/ | |
| }; | |
| #ifdef HAVE_OPENSSL_RAND | |
| /* helper routines for seeding the SSL PRNG */ | |
| static PyObject * | |
| PySSL_RAND_add(PyObject *self, PyObject *args) | |
| { | |
| char *buf; | |
| Py_ssize_t len, written; | |
| double entropy; | |
| if (!PyArg_ParseTuple(args, "s#d:RAND_add", &buf, &len, &entropy)) | |
| return NULL; | |
| do { | |
| if (len >= INT_MAX) { | |
| written = INT_MAX; | |
| } else { | |
| written = len; | |
| } | |
| RAND_add(buf, (int)written, entropy); | |
| buf += written; | |
| len -= written; | |
| } while (len); | |
| Py_INCREF(Py_None); | |
| return Py_None; | |
| } | |
| PyDoc_STRVAR(PySSL_RAND_add_doc, | |
| "RAND_add(string, entropy)\n\ | |
| \n\ | |
| Mix string into the OpenSSL PRNG state. entropy (a float) is a lower\n\ | |
| bound on the entropy contained in string. See RFC 1750."); | |
| static PyObject * | |
| PySSL_RAND_status(PyObject *self) | |
| { | |
| return PyLong_FromLong(RAND_status()); | |
| } | |
| PyDoc_STRVAR(PySSL_RAND_status_doc, | |
| "RAND_status() -> 0 or 1\n\ | |
| \n\ | |
| Returns 1 if the OpenSSL PRNG has been seeded with enough data and 0 if not.\n\ | |
| It is necessary to seed the PRNG with RAND_add() on some platforms before\n\ | |
| using the ssl() function."); | |
| #endif /* HAVE_OPENSSL_RAND */ | |
| #ifndef OPENSSL_NO_EGD | |
| static PyObject * | |
| PySSL_RAND_egd(PyObject *self, PyObject *arg) | |
| { | |
| int bytes; | |
| if (!PyString_Check(arg)) | |
| return PyErr_Format(PyExc_TypeError, | |
| "RAND_egd() expected string, found %s", | |
| Py_TYPE(arg)->tp_name); | |
| bytes = RAND_egd(PyString_AS_STRING(arg)); | |
| if (bytes == -1) { | |
| PyErr_SetString(PySSLErrorObject, | |
| "EGD connection failed or EGD did not return " | |
| "enough data to seed the PRNG"); | |
| return NULL; | |
| } | |
| return PyInt_FromLong(bytes); | |
| } | |
| PyDoc_STRVAR(PySSL_RAND_egd_doc, | |
| "RAND_egd(path) -> bytes\n\ | |
| \n\ | |
| Queries the entropy gather daemon (EGD) on the socket named by 'path'.\n\ | |
| Returns number of bytes read. Raises SSLError if connection to EGD\n\ | |
| fails or if it does not provide enough data to seed PRNG."); | |
| #endif /* !OPENSSL_NO_EGD */ | |
| PyDoc_STRVAR(PySSL_get_default_verify_paths_doc, | |
| "get_default_verify_paths() -> tuple\n\ | |
| \n\ | |
| Return search paths and environment vars that are used by SSLContext's\n\ | |
| set_default_verify_paths() to load default CAs. The values are\n\ | |
| 'cert_file_env', 'cert_file', 'cert_dir_env', 'cert_dir'."); | |
| static PyObject * | |
| PySSL_get_default_verify_paths(PyObject *self) | |
| { | |
| PyObject *ofile_env = NULL; | |
| PyObject *ofile = NULL; | |
| PyObject *odir_env = NULL; | |
| PyObject *odir = NULL; | |
| #define CONVERT(info, target) { \ | |
| const char *tmp = (info); \ | |
| target = NULL; \ | |
| if (!tmp) { Py_INCREF(Py_None); target = Py_None; } \ | |
| else { target = PyBytes_FromString(tmp); } \ | |
| if (!target) goto error; \ | |
| } | |
| CONVERT(X509_get_default_cert_file_env(), ofile_env); | |
| CONVERT(X509_get_default_cert_file(), ofile); | |
| CONVERT(X509_get_default_cert_dir_env(), odir_env); | |
| CONVERT(X509_get_default_cert_dir(), odir); | |
| #undef CONVERT | |
| return Py_BuildValue("NNNN", ofile_env, ofile, odir_env, odir); | |
| error: | |
| Py_XDECREF(ofile_env); | |
| Py_XDECREF(ofile); | |
| Py_XDECREF(odir_env); | |
| Py_XDECREF(odir); | |
| return NULL; | |
| } | |
| static PyObject* | |
| asn1obj2py(ASN1_OBJECT *obj) | |
| { | |
| int nid; | |
| const char *ln, *sn; | |
| char buf[100]; | |
| Py_ssize_t buflen; | |
| nid = OBJ_obj2nid(obj); | |
| if (nid == NID_undef) { | |
| PyErr_Format(PyExc_ValueError, "Unknown object"); | |
| return NULL; | |
| } | |
| sn = OBJ_nid2sn(nid); | |
| ln = OBJ_nid2ln(nid); | |
| buflen = OBJ_obj2txt(buf, sizeof(buf), obj, 1); | |
| if (buflen < 0) { | |
| _setSSLError(NULL, 0, __FILE__, __LINE__); | |
| return NULL; | |
| } | |
| if (buflen) { | |
| return Py_BuildValue("isss#", nid, sn, ln, buf, buflen); | |
| } else { | |
| return Py_BuildValue("issO", nid, sn, ln, Py_None); | |
| } | |
| } | |
| PyDoc_STRVAR(PySSL_txt2obj_doc, | |
| "txt2obj(txt, name=False) -> (nid, shortname, longname, oid)\n\ | |
| \n\ | |
| Lookup NID, short name, long name and OID of an ASN1_OBJECT. By default\n\ | |
| objects are looked up by OID. With name=True short and long name are also\n\ | |
| matched."); | |
| static PyObject* | |
| PySSL_txt2obj(PyObject *self, PyObject *args, PyObject *kwds) | |
| { | |
| char *kwlist[] = {"txt", "name", NULL}; | |
| PyObject *result = NULL; | |
| char *txt; | |
| PyObject *pyname = Py_None; | |
| int name = 0; | |
| ASN1_OBJECT *obj; | |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "s|O:txt2obj", | |
| kwlist, &txt, &pyname)) { | |
| return NULL; | |
| } | |
| name = PyObject_IsTrue(pyname); | |
| if (name < 0) | |
| return NULL; | |
| obj = OBJ_txt2obj(txt, name ? 0 : 1); | |
| if (obj == NULL) { | |
| PyErr_Format(PyExc_ValueError, "unknown object '%.100s'", txt); | |
| return NULL; | |
| } | |
| result = asn1obj2py(obj); | |
| ASN1_OBJECT_free(obj); | |
| return result; | |
| } | |
| PyDoc_STRVAR(PySSL_nid2obj_doc, | |
| "nid2obj(nid) -> (nid, shortname, longname, oid)\n\ | |
| \n\ | |
| Lookup NID, short name, long name and OID of an ASN1_OBJECT by NID."); | |
| static PyObject* | |
| PySSL_nid2obj(PyObject *self, PyObject *args) | |
| { | |
| PyObject *result = NULL; | |
| int nid; | |
| ASN1_OBJECT *obj; | |
| if (!PyArg_ParseTuple(args, "i:nid2obj", &nid)) { | |
| return NULL; | |
| } | |
| if (nid < NID_undef) { | |
| PyErr_SetString(PyExc_ValueError, "NID must be positive."); | |
| return NULL; | |
| } | |
| obj = OBJ_nid2obj(nid); | |
| if (obj == NULL) { | |
| PyErr_Format(PyExc_ValueError, "unknown NID %i", nid); | |
| return NULL; | |
| } | |
| result = asn1obj2py(obj); | |
| ASN1_OBJECT_free(obj); | |
| return result; | |
| } | |
| #ifdef _MSC_VER | |
| static PyObject* | |
| certEncodingType(DWORD encodingType) | |
| { | |
| static PyObject *x509_asn = NULL; | |
| static PyObject *pkcs_7_asn = NULL; | |
| if (x509_asn == NULL) { | |
| x509_asn = PyString_InternFromString("x509_asn"); | |
| if (x509_asn == NULL) | |
| return NULL; | |
| } | |
| if (pkcs_7_asn == NULL) { | |
| pkcs_7_asn = PyString_InternFromString("pkcs_7_asn"); | |
| if (pkcs_7_asn == NULL) | |
| return NULL; | |
| } | |
| switch(encodingType) { | |
| case X509_ASN_ENCODING: | |
| Py_INCREF(x509_asn); | |
| return x509_asn; | |
| case PKCS_7_ASN_ENCODING: | |
| Py_INCREF(pkcs_7_asn); | |
| return pkcs_7_asn; | |
| default: | |
| return PyInt_FromLong(encodingType); | |
| } | |
| } | |
| static PyObject* | |
| parseKeyUsage(PCCERT_CONTEXT pCertCtx, DWORD flags) | |
| { | |
| CERT_ENHKEY_USAGE *usage; | |
| DWORD size, error, i; | |
| PyObject *retval; | |
| if (!CertGetEnhancedKeyUsage(pCertCtx, flags, NULL, &size)) { | |
| error = GetLastError(); | |
| if (error == CRYPT_E_NOT_FOUND) { | |
| Py_RETURN_TRUE; | |
| } | |
| return PyErr_SetFromWindowsErr(error); | |
| } | |
| usage = (CERT_ENHKEY_USAGE*)PyMem_Malloc(size); | |
| if (usage == NULL) { | |
| return PyErr_NoMemory(); | |
| } | |
| /* Now get the actual enhanced usage property */ | |
| if (!CertGetEnhancedKeyUsage(pCertCtx, flags, usage, &size)) { | |
| PyMem_Free(usage); | |
| error = GetLastError(); | |
| if (error == CRYPT_E_NOT_FOUND) { | |
| Py_RETURN_TRUE; | |
| } | |
| return PyErr_SetFromWindowsErr(error); | |
| } | |
| retval = PySet_New(NULL); | |
| if (retval == NULL) { | |
| goto error; | |
| } | |
| for (i = 0; i < usage->cUsageIdentifier; ++i) { | |
| if (usage->rgpszUsageIdentifier[i]) { | |
| PyObject *oid; | |
| int err; | |
| oid = PyString_FromString(usage->rgpszUsageIdentifier[i]); | |
| if (oid == NULL) { | |
| Py_CLEAR(retval); | |
| goto error; | |
| } | |
| err = PySet_Add(retval, oid); | |
| Py_DECREF(oid); | |
| if (err == -1) { | |
| Py_CLEAR(retval); | |
| goto error; | |
| } | |
| } | |
| } | |
| error: | |
| PyMem_Free(usage); | |
| return retval; | |
| } | |
| PyDoc_STRVAR(PySSL_enum_certificates_doc, | |
| "enum_certificates(store_name) -> []\n\ | |
| \n\ | |
| Retrieve certificates from Windows' cert store. store_name may be one of\n\ | |
| 'CA', 'ROOT' or 'MY'. The system may provide more cert storages, too.\n\ | |
| The function returns a list of (bytes, encoding_type, trust) tuples. The\n\ | |
| encoding_type flag can be interpreted with X509_ASN_ENCODING or\n\ | |
| PKCS_7_ASN_ENCODING. The trust setting is either a set of OIDs or the\n\ | |
| boolean True."); | |
| static PyObject * | |
| PySSL_enum_certificates(PyObject *self, PyObject *args, PyObject *kwds) | |
| { | |
| char *kwlist[] = {"store_name", NULL}; | |
| char *store_name; | |
| HCERTSTORE hStore = NULL; | |
| PCCERT_CONTEXT pCertCtx = NULL; | |
| PyObject *keyusage = NULL, *cert = NULL, *enc = NULL, *tup = NULL; | |
| PyObject *result = NULL; | |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "s:enum_certificates", | |
| kwlist, &store_name)) { | |
| return NULL; | |
| } | |
| result = PyList_New(0); | |
| if (result == NULL) { | |
| return NULL; | |
| } | |
| hStore = CertOpenStore(CERT_STORE_PROV_SYSTEM_A, 0, (HCRYPTPROV)NULL, | |
| CERT_STORE_READONLY_FLAG | CERT_SYSTEM_STORE_LOCAL_MACHINE, | |
| store_name); | |
| if (hStore == NULL) { | |
| Py_DECREF(result); | |
| return PyErr_SetFromWindowsErr(GetLastError()); | |
| } | |
| while (pCertCtx = CertEnumCertificatesInStore(hStore, pCertCtx)) { | |
| cert = PyBytes_FromStringAndSize((const char*)pCertCtx->pbCertEncoded, | |
| pCertCtx->cbCertEncoded); | |
| if (!cert) { | |
| Py_CLEAR(result); | |
| break; | |
| } | |
| if ((enc = certEncodingType(pCertCtx->dwCertEncodingType)) == NULL) { | |
| Py_CLEAR(result); | |
| break; | |
| } | |
| keyusage = parseKeyUsage(pCertCtx, CERT_FIND_PROP_ONLY_ENHKEY_USAGE_FLAG); | |
| if (keyusage == Py_True) { | |
| Py_DECREF(keyusage); | |
| keyusage = parseKeyUsage(pCertCtx, CERT_FIND_EXT_ONLY_ENHKEY_USAGE_FLAG); | |
| } | |
| if (keyusage == NULL) { | |
| Py_CLEAR(result); | |
| break; | |
| } | |
| if ((tup = PyTuple_New(3)) == NULL) { | |
| Py_CLEAR(result); | |
| break; | |
| } | |
| PyTuple_SET_ITEM(tup, 0, cert); | |
| cert = NULL; | |
| PyTuple_SET_ITEM(tup, 1, enc); | |
| enc = NULL; | |
| PyTuple_SET_ITEM(tup, 2, keyusage); | |
| keyusage = NULL; | |
| if (PyList_Append(result, tup) < 0) { | |
| Py_CLEAR(result); | |
| break; | |
| } | |
| Py_CLEAR(tup); | |
| } | |
| if (pCertCtx) { | |
| /* loop ended with an error, need to clean up context manually */ | |
| CertFreeCertificateContext(pCertCtx); | |
| } | |
| /* In error cases cert, enc and tup may not be NULL */ | |
| Py_XDECREF(cert); | |
| Py_XDECREF(enc); | |
| Py_XDECREF(keyusage); | |
| Py_XDECREF(tup); | |
| if (!CertCloseStore(hStore, 0)) { | |
| /* This error case might shadow another exception.*/ | |
| Py_XDECREF(result); | |
| return PyErr_SetFromWindowsErr(GetLastError()); | |
| } | |
| return result; | |
| } | |
| PyDoc_STRVAR(PySSL_enum_crls_doc, | |
| "enum_crls(store_name) -> []\n\ | |
| \n\ | |
| Retrieve CRLs from Windows' cert store. store_name may be one of\n\ | |
| 'CA', 'ROOT' or 'MY'. The system may provide more cert storages, too.\n\ | |
| The function returns a list of (bytes, encoding_type) tuples. The\n\ | |
| encoding_type flag can be interpreted with X509_ASN_ENCODING or\n\ | |
| PKCS_7_ASN_ENCODING."); | |
| static PyObject * | |
| PySSL_enum_crls(PyObject *self, PyObject *args, PyObject *kwds) | |
| { | |
| char *kwlist[] = {"store_name", NULL}; | |
| char *store_name; | |
| HCERTSTORE hStore = NULL; | |
| PCCRL_CONTEXT pCrlCtx = NULL; | |
| PyObject *crl = NULL, *enc = NULL, *tup = NULL; | |
| PyObject *result = NULL; | |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "s:enum_crls", | |
| kwlist, &store_name)) { | |
| return NULL; | |
| } | |
| result = PyList_New(0); | |
| if (result == NULL) { | |
| return NULL; | |
| } | |
| hStore = CertOpenStore(CERT_STORE_PROV_SYSTEM_A, 0, (HCRYPTPROV)NULL, | |
| CERT_STORE_READONLY_FLAG | CERT_SYSTEM_STORE_LOCAL_MACHINE, | |
| store_name); | |
| if (hStore == NULL) { | |
| Py_DECREF(result); | |
| return PyErr_SetFromWindowsErr(GetLastError()); | |
| } | |
| while (pCrlCtx = CertEnumCRLsInStore(hStore, pCrlCtx)) { | |
| crl = PyBytes_FromStringAndSize((const char*)pCrlCtx->pbCrlEncoded, | |
| pCrlCtx->cbCrlEncoded); | |
| if (!crl) { | |
| Py_CLEAR(result); | |
| break; | |
| } | |
| if ((enc = certEncodingType(pCrlCtx->dwCertEncodingType)) == NULL) { | |
| Py_CLEAR(result); | |
| break; | |
| } | |
| if ((tup = PyTuple_New(2)) == NULL) { | |
| Py_CLEAR(result); | |
| break; | |
| } | |
| PyTuple_SET_ITEM(tup, 0, crl); | |
| crl = NULL; | |
| PyTuple_SET_ITEM(tup, 1, enc); | |
| enc = NULL; | |
| if (PyList_Append(result, tup) < 0) { | |
| Py_CLEAR(result); | |
| break; | |
| } | |
| Py_CLEAR(tup); | |
| } | |
| if (pCrlCtx) { | |
| /* loop ended with an error, need to clean up context manually */ | |
| CertFreeCRLContext(pCrlCtx); | |
| } | |
| /* In error cases cert, enc and tup may not be NULL */ | |
| Py_XDECREF(crl); | |
| Py_XDECREF(enc); | |
| Py_XDECREF(tup); | |
| if (!CertCloseStore(hStore, 0)) { | |
| /* This error case might shadow another exception.*/ | |
| Py_XDECREF(result); | |
| return PyErr_SetFromWindowsErr(GetLastError()); | |
| } | |
| return result; | |
| } | |
| #endif /* _MSC_VER */ | |
| /* List of functions exported by this module. */ | |
| static PyMethodDef PySSL_methods[] = { | |
| {"_test_decode_cert", PySSL_test_decode_certificate, | |
| METH_VARARGS}, | |
| #ifdef HAVE_OPENSSL_RAND | |
| {"RAND_add", PySSL_RAND_add, METH_VARARGS, | |
| PySSL_RAND_add_doc}, | |
| {"RAND_status", (PyCFunction)PySSL_RAND_status, METH_NOARGS, | |
| PySSL_RAND_status_doc}, | |
| #endif | |
| #ifndef OPENSSL_NO_EGD | |
| {"RAND_egd", PySSL_RAND_egd, METH_VARARGS, | |
| PySSL_RAND_egd_doc}, | |
| #endif | |
| {"get_default_verify_paths", (PyCFunction)PySSL_get_default_verify_paths, | |
| METH_NOARGS, PySSL_get_default_verify_paths_doc}, | |
| #ifdef _MSC_VER | |
| {"enum_certificates", (PyCFunction)PySSL_enum_certificates, | |
| METH_VARARGS | METH_KEYWORDS, PySSL_enum_certificates_doc}, | |
| {"enum_crls", (PyCFunction)PySSL_enum_crls, | |
| METH_VARARGS | METH_KEYWORDS, PySSL_enum_crls_doc}, | |
| #endif | |
| {"txt2obj", (PyCFunction)PySSL_txt2obj, | |
| METH_VARARGS | METH_KEYWORDS, PySSL_txt2obj_doc}, | |
| {"nid2obj", (PyCFunction)PySSL_nid2obj, | |
| METH_VARARGS, PySSL_nid2obj_doc}, | |
| {NULL, NULL} /* Sentinel */ | |
| }; | |
| #ifdef HAVE_OPENSSL_CRYPTO_LOCK | |
| /* an implementation of OpenSSL threading operations in terms | |
| * of the Python C thread library | |
| * Only used up to 1.0.2. OpenSSL 1.1.0+ has its own locking code. | |
| */ | |
| static PyThread_type_lock *_ssl_locks = NULL; | |
| #if OPENSSL_VERSION_NUMBER >= 0x10000000 | |
| /* use new CRYPTO_THREADID API. */ | |
| static void | |
| _ssl_threadid_callback(CRYPTO_THREADID *id) | |
| { | |
| CRYPTO_THREADID_set_numeric(id, | |
| (unsigned long)PyThread_get_thread_ident()); | |
| } | |
| #else | |
| /* deprecated CRYPTO_set_id_callback() API. */ | |
| static unsigned long | |
| _ssl_thread_id_function (void) { | |
| return PyThread_get_thread_ident(); | |
| } | |
| #endif | |
| static void _ssl_thread_locking_function | |
| (int mode, int n, const char *file, int line) { | |
| /* this function is needed to perform locking on shared data | |
| structures. (Note that OpenSSL uses a number of global data | |
| structures that will be implicitly shared whenever multiple | |
| threads use OpenSSL.) Multi-threaded applications will | |
| crash at random if it is not set. | |
| locking_function() must be able to handle up to | |
| CRYPTO_num_locks() different mutex locks. It sets the n-th | |
| lock if mode & CRYPTO_LOCK, and releases it otherwise. | |
| file and line are the file number of the function setting the | |
| lock. They can be useful for debugging. | |
| */ | |
| if ((_ssl_locks == NULL) || | |
| (n < 0) || ((unsigned)n >= _ssl_locks_count)) | |
| return; | |
| if (mode & CRYPTO_LOCK) { | |
| PyThread_acquire_lock(_ssl_locks[n], 1); | |
| } else { | |
| PyThread_release_lock(_ssl_locks[n]); | |
| } | |
| } | |
| static int _setup_ssl_threads(void) { | |
| unsigned int i; | |
| if (_ssl_locks == NULL) { | |
| _ssl_locks_count = CRYPTO_num_locks(); | |
| _ssl_locks = PyMem_New(PyThread_type_lock, _ssl_locks_count); | |
| if (_ssl_locks == NULL) { | |
| PyErr_NoMemory(); | |
| return 0; | |
| } | |
| memset(_ssl_locks, 0, | |
| sizeof(PyThread_type_lock) * _ssl_locks_count); | |
| for (i = 0; i < _ssl_locks_count; i++) { | |
| _ssl_locks[i] = PyThread_allocate_lock(); | |
| if (_ssl_locks[i] == NULL) { | |
| unsigned int j; | |
| for (j = 0; j < i; j++) { | |
| PyThread_free_lock(_ssl_locks[j]); | |
| } | |
| PyMem_Free(_ssl_locks); | |
| return 0; | |
| } | |
| } | |
| CRYPTO_set_locking_callback(_ssl_thread_locking_function); | |
| #if OPENSSL_VERSION_NUMBER >= 0x10000000 | |
| CRYPTO_THREADID_set_callback(_ssl_threadid_callback); | |
| #else | |
| CRYPTO_set_id_callback(_ssl_thread_id_function); | |
| #endif | |
| } | |
| return 1; | |
| } | |
| #endif /* HAVE_OPENSSL_CRYPTO_LOCK for WITH_THREAD && OpenSSL < 1.1.0 */ | |
| PyDoc_STRVAR(module_doc, | |
| "Implementation module for SSL socket operations. See the socket module\n\ | |
| for documentation."); | |
| static void | |
| parse_openssl_version(unsigned long libver, | |
| unsigned int *major, unsigned int *minor, | |
| unsigned int *fix, unsigned int *patch, | |
| unsigned int *status) | |
| { | |
| *status = libver & 0xF; | |
| libver >>= 4; | |
| *patch = libver & 0xFF; | |
| libver >>= 8; | |
| *fix = libver & 0xFF; | |
| libver >>= 8; | |
| *minor = libver & 0xFF; | |
| libver >>= 8; | |
| *major = libver & 0xFF; | |
| } | |
| PyMODINIT_FUNC | |
| init_ssl(void) | |
| { | |
| PyObject *m, *d, *r; | |
| unsigned long libver; | |
| unsigned int major, minor, fix, patch, status; | |
| struct py_ssl_error_code *errcode; | |
| struct py_ssl_library_code *libcode; | |
| if (PyType_Ready(&PySSLContext_Type) < 0) | |
| return; | |
| if (PyType_Ready(&PySSLSocket_Type) < 0) | |
| return; | |
| m = Py_InitModule3("_ssl", PySSL_methods, module_doc); | |
| if (m == NULL) | |
| return; | |
| d = PyModule_GetDict(m); | |
| /* Load _socket module and its C API */ | |
| if (PySocketModule_ImportModuleAndAPI()) | |
| return; | |
| /* Init OpenSSL */ | |
| SSL_load_error_strings(); | |
| SSL_library_init(); | |
| #ifdef WITH_THREAD | |
| #ifdef HAVE_OPENSSL_CRYPTO_LOCK | |
| /* note that this will start threading if not already started */ | |
| if (!_setup_ssl_threads()) { | |
| return; | |
| } | |
| #elif OPENSSL_VERSION_1_1 && defined(OPENSSL_THREADS) | |
| /* OpenSSL 1.1.0 builtin thread support is enabled */ | |
| _ssl_locks_count++; | |
| #endif | |
| #endif /* WITH_THREAD */ | |
| OpenSSL_add_all_algorithms(); | |
| /* Add symbols to module dict */ | |
| PySSLErrorObject = PyErr_NewExceptionWithDoc( | |
| "ssl.SSLError", SSLError_doc, | |
| PySocketModule.error, NULL); | |
| if (PySSLErrorObject == NULL) | |
| return; | |
| ((PyTypeObject *)PySSLErrorObject)->tp_str = (reprfunc)SSLError_str; | |
| PySSLZeroReturnErrorObject = PyErr_NewExceptionWithDoc( | |
| "ssl.SSLZeroReturnError", SSLZeroReturnError_doc, | |
| PySSLErrorObject, NULL); | |
| PySSLWantReadErrorObject = PyErr_NewExceptionWithDoc( | |
| "ssl.SSLWantReadError", SSLWantReadError_doc, | |
| PySSLErrorObject, NULL); | |
| PySSLWantWriteErrorObject = PyErr_NewExceptionWithDoc( | |
| "ssl.SSLWantWriteError", SSLWantWriteError_doc, | |
| PySSLErrorObject, NULL); | |
| PySSLSyscallErrorObject = PyErr_NewExceptionWithDoc( | |
| "ssl.SSLSyscallError", SSLSyscallError_doc, | |
| PySSLErrorObject, NULL); | |
| PySSLEOFErrorObject = PyErr_NewExceptionWithDoc( | |
| "ssl.SSLEOFError", SSLEOFError_doc, | |
| PySSLErrorObject, NULL); | |
| if (PySSLZeroReturnErrorObject == NULL | |
| || PySSLWantReadErrorObject == NULL | |
| || PySSLWantWriteErrorObject == NULL | |
| || PySSLSyscallErrorObject == NULL | |
| || PySSLEOFErrorObject == NULL) | |
| return; | |
| ((PyTypeObject *)PySSLZeroReturnErrorObject)->tp_str = (reprfunc)SSLError_str; | |
| ((PyTypeObject *)PySSLWantReadErrorObject)->tp_str = (reprfunc)SSLError_str; | |
| ((PyTypeObject *)PySSLWantWriteErrorObject)->tp_str = (reprfunc)SSLError_str; | |
| ((PyTypeObject *)PySSLSyscallErrorObject)->tp_str = (reprfunc)SSLError_str; | |
| ((PyTypeObject *)PySSLEOFErrorObject)->tp_str = (reprfunc)SSLError_str; | |
| if (PyDict_SetItemString(d, "SSLError", PySSLErrorObject) != 0 | |
| || PyDict_SetItemString(d, "SSLZeroReturnError", PySSLZeroReturnErrorObject) != 0 | |
| || PyDict_SetItemString(d, "SSLWantReadError", PySSLWantReadErrorObject) != 0 | |
| || PyDict_SetItemString(d, "SSLWantWriteError", PySSLWantWriteErrorObject) != 0 | |
| || PyDict_SetItemString(d, "SSLSyscallError", PySSLSyscallErrorObject) != 0 | |
| || PyDict_SetItemString(d, "SSLEOFError", PySSLEOFErrorObject) != 0) | |
| return; | |
| if (PyDict_SetItemString(d, "_SSLContext", | |
| (PyObject *)&PySSLContext_Type) != 0) | |
| return; | |
| if (PyDict_SetItemString(d, "_SSLSocket", | |
| (PyObject *)&PySSLSocket_Type) != 0) | |
| return; | |
| PyModule_AddIntConstant(m, "SSL_ERROR_ZERO_RETURN", | |
| PY_SSL_ERROR_ZERO_RETURN); | |
| PyModule_AddIntConstant(m, "SSL_ERROR_WANT_READ", | |
| PY_SSL_ERROR_WANT_READ); | |
| PyModule_AddIntConstant(m, "SSL_ERROR_WANT_WRITE", | |
| PY_SSL_ERROR_WANT_WRITE); | |
| PyModule_AddIntConstant(m, "SSL_ERROR_WANT_X509_LOOKUP", | |
| PY_SSL_ERROR_WANT_X509_LOOKUP); | |
| PyModule_AddIntConstant(m, "SSL_ERROR_SYSCALL", | |
| PY_SSL_ERROR_SYSCALL); | |
| PyModule_AddIntConstant(m, "SSL_ERROR_SSL", | |
| PY_SSL_ERROR_SSL); | |
| PyModule_AddIntConstant(m, "SSL_ERROR_WANT_CONNECT", | |
| PY_SSL_ERROR_WANT_CONNECT); | |
| /* non ssl.h errorcodes */ | |
| PyModule_AddIntConstant(m, "SSL_ERROR_EOF", | |
| PY_SSL_ERROR_EOF); | |
| PyModule_AddIntConstant(m, "SSL_ERROR_INVALID_ERROR_CODE", | |
| PY_SSL_ERROR_INVALID_ERROR_CODE); | |
| /* cert requirements */ | |
| PyModule_AddIntConstant(m, "CERT_NONE", | |
| PY_SSL_CERT_NONE); | |
| PyModule_AddIntConstant(m, "CERT_OPTIONAL", | |
| PY_SSL_CERT_OPTIONAL); | |
| PyModule_AddIntConstant(m, "CERT_REQUIRED", | |
| PY_SSL_CERT_REQUIRED); | |
| /* CRL verification for verification_flags */ | |
| PyModule_AddIntConstant(m, "VERIFY_DEFAULT", | |
| 0); | |
| PyModule_AddIntConstant(m, "VERIFY_CRL_CHECK_LEAF", | |
| X509_V_FLAG_CRL_CHECK); | |
| PyModule_AddIntConstant(m, "VERIFY_CRL_CHECK_CHAIN", | |
| X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL); | |
| PyModule_AddIntConstant(m, "VERIFY_X509_STRICT", | |
| X509_V_FLAG_X509_STRICT); | |
| #ifdef X509_V_FLAG_TRUSTED_FIRST | |
| PyModule_AddIntConstant(m, "VERIFY_X509_TRUSTED_FIRST", | |
| X509_V_FLAG_TRUSTED_FIRST); | |
| #endif | |
| /* Alert Descriptions from ssl.h */ | |
| /* note RESERVED constants no longer intended for use have been removed */ | |
| /* http://www.iana.org/assignments/tls-parameters/tls-parameters.xml#tls-parameters-6 */ | |
| #define ADD_AD_CONSTANT(s) \ | |
| PyModule_AddIntConstant(m, "ALERT_DESCRIPTION_"#s, \ | |
| SSL_AD_##s) | |
| ADD_AD_CONSTANT(CLOSE_NOTIFY); | |
| ADD_AD_CONSTANT(UNEXPECTED_MESSAGE); | |
| ADD_AD_CONSTANT(BAD_RECORD_MAC); | |
| ADD_AD_CONSTANT(RECORD_OVERFLOW); | |
| ADD_AD_CONSTANT(DECOMPRESSION_FAILURE); | |
| ADD_AD_CONSTANT(HANDSHAKE_FAILURE); | |
| ADD_AD_CONSTANT(BAD_CERTIFICATE); | |
| ADD_AD_CONSTANT(UNSUPPORTED_CERTIFICATE); | |
| ADD_AD_CONSTANT(CERTIFICATE_REVOKED); | |
| ADD_AD_CONSTANT(CERTIFICATE_EXPIRED); | |
| ADD_AD_CONSTANT(CERTIFICATE_UNKNOWN); | |
| ADD_AD_CONSTANT(ILLEGAL_PARAMETER); | |
| ADD_AD_CONSTANT(UNKNOWN_CA); | |
| ADD_AD_CONSTANT(ACCESS_DENIED); | |
| ADD_AD_CONSTANT(DECODE_ERROR); | |
| ADD_AD_CONSTANT(DECRYPT_ERROR); | |
| ADD_AD_CONSTANT(PROTOCOL_VERSION); | |
| ADD_AD_CONSTANT(INSUFFICIENT_SECURITY); | |
| ADD_AD_CONSTANT(INTERNAL_ERROR); | |
| ADD_AD_CONSTANT(USER_CANCELLED); | |
| ADD_AD_CONSTANT(NO_RENEGOTIATION); | |
| /* Not all constants are in old OpenSSL versions */ | |
| #ifdef SSL_AD_UNSUPPORTED_EXTENSION | |
| ADD_AD_CONSTANT(UNSUPPORTED_EXTENSION); | |
| #endif | |
| #ifdef SSL_AD_CERTIFICATE_UNOBTAINABLE | |
| ADD_AD_CONSTANT(CERTIFICATE_UNOBTAINABLE); | |
| #endif | |
| #ifdef SSL_AD_UNRECOGNIZED_NAME | |
| ADD_AD_CONSTANT(UNRECOGNIZED_NAME); | |
| #endif | |
| #ifdef SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE | |
| ADD_AD_CONSTANT(BAD_CERTIFICATE_STATUS_RESPONSE); | |
| #endif | |
| #ifdef SSL_AD_BAD_CERTIFICATE_HASH_VALUE | |
| ADD_AD_CONSTANT(BAD_CERTIFICATE_HASH_VALUE); | |
| #endif | |
| #ifdef SSL_AD_UNKNOWN_PSK_IDENTITY | |
| ADD_AD_CONSTANT(UNKNOWN_PSK_IDENTITY); | |
| #endif | |
| #undef ADD_AD_CONSTANT | |
| /* protocol versions */ | |
| #ifndef OPENSSL_NO_SSL2 | |
| PyModule_AddIntConstant(m, "PROTOCOL_SSLv2", | |
| PY_SSL_VERSION_SSL2); | |
| #endif | |
| #ifndef OPENSSL_NO_SSL3 | |
| PyModule_AddIntConstant(m, "PROTOCOL_SSLv3", | |
| PY_SSL_VERSION_SSL3); | |
| #endif | |
| PyModule_AddIntConstant(m, "PROTOCOL_SSLv23", | |
| PY_SSL_VERSION_TLS); | |
| PyModule_AddIntConstant(m, "PROTOCOL_TLS", | |
| PY_SSL_VERSION_TLS); | |
| PyModule_AddIntConstant(m, "PROTOCOL_TLSv1", | |
| PY_SSL_VERSION_TLS1); | |
| #if HAVE_TLSv1_2 | |
| PyModule_AddIntConstant(m, "PROTOCOL_TLSv1_1", | |
| PY_SSL_VERSION_TLS1_1); | |
| PyModule_AddIntConstant(m, "PROTOCOL_TLSv1_2", | |
| PY_SSL_VERSION_TLS1_2); | |
| #endif | |
| /* protocol options */ | |
| PyModule_AddIntConstant(m, "OP_ALL", | |
| SSL_OP_ALL & ~SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS); | |
| PyModule_AddIntConstant(m, "OP_NO_SSLv2", SSL_OP_NO_SSLv2); | |
| PyModule_AddIntConstant(m, "OP_NO_SSLv3", SSL_OP_NO_SSLv3); | |
| PyModule_AddIntConstant(m, "OP_NO_TLSv1", SSL_OP_NO_TLSv1); | |
| #if HAVE_TLSv1_2 | |
| PyModule_AddIntConstant(m, "OP_NO_TLSv1_1", SSL_OP_NO_TLSv1_1); | |
| PyModule_AddIntConstant(m, "OP_NO_TLSv1_2", SSL_OP_NO_TLSv1_2); | |
| #endif | |
| PyModule_AddIntConstant(m, "OP_CIPHER_SERVER_PREFERENCE", | |
| SSL_OP_CIPHER_SERVER_PREFERENCE); | |
| PyModule_AddIntConstant(m, "OP_SINGLE_DH_USE", SSL_OP_SINGLE_DH_USE); | |
| #ifdef SSL_OP_SINGLE_ECDH_USE | |
| PyModule_AddIntConstant(m, "OP_SINGLE_ECDH_USE", SSL_OP_SINGLE_ECDH_USE); | |
| #endif | |
| #ifdef SSL_OP_NO_COMPRESSION | |
| PyModule_AddIntConstant(m, "OP_NO_COMPRESSION", | |
| SSL_OP_NO_COMPRESSION); | |
| #endif | |
| #if HAVE_SNI | |
| r = Py_True; | |
| #else | |
| r = Py_False; | |
| #endif | |
| Py_INCREF(r); | |
| PyModule_AddObject(m, "HAS_SNI", r); | |
| #if HAVE_OPENSSL_FINISHED | |
| r = Py_True; | |
| #else | |
| r = Py_False; | |
| #endif | |
| Py_INCREF(r); | |
| PyModule_AddObject(m, "HAS_TLS_UNIQUE", r); | |
| #ifdef OPENSSL_NO_ECDH | |
| r = Py_False; | |
| #else | |
| r = Py_True; | |
| #endif | |
| Py_INCREF(r); | |
| PyModule_AddObject(m, "HAS_ECDH", r); | |
| #ifdef OPENSSL_NPN_NEGOTIATED | |
| r = Py_True; | |
| #else | |
| r = Py_False; | |
| #endif | |
| Py_INCREF(r); | |
| PyModule_AddObject(m, "HAS_NPN", r); | |
| #ifdef HAVE_ALPN | |
| r = Py_True; | |
| #else | |
| r = Py_False; | |
| #endif | |
| Py_INCREF(r); | |
| PyModule_AddObject(m, "HAS_ALPN", r); | |
| /* Mappings for error codes */ | |
| err_codes_to_names = PyDict_New(); | |
| err_names_to_codes = PyDict_New(); | |
| if (err_codes_to_names == NULL || err_names_to_codes == NULL) | |
| return; | |
| errcode = error_codes; | |
| while (errcode->mnemonic != NULL) { | |
| PyObject *mnemo, *key; | |
| mnemo = PyUnicode_FromString(errcode->mnemonic); | |
| key = Py_BuildValue("ii", errcode->library, errcode->reason); | |
| if (mnemo == NULL || key == NULL) | |
| return; | |
| if (PyDict_SetItem(err_codes_to_names, key, mnemo)) | |
| return; | |
| if (PyDict_SetItem(err_names_to_codes, mnemo, key)) | |
| return; | |
| Py_DECREF(key); | |
| Py_DECREF(mnemo); | |
| errcode++; | |
| } | |
| if (PyModule_AddObject(m, "err_codes_to_names", err_codes_to_names)) | |
| return; | |
| if (PyModule_AddObject(m, "err_names_to_codes", err_names_to_codes)) | |
| return; | |
| lib_codes_to_names = PyDict_New(); | |
| if (lib_codes_to_names == NULL) | |
| return; | |
| libcode = library_codes; | |
| while (libcode->library != NULL) { | |
| PyObject *mnemo, *key; | |
| key = PyLong_FromLong(libcode->code); | |
| mnemo = PyUnicode_FromString(libcode->library); | |
| if (key == NULL || mnemo == NULL) | |
| return; | |
| if (PyDict_SetItem(lib_codes_to_names, key, mnemo)) | |
| return; | |
| Py_DECREF(key); | |
| Py_DECREF(mnemo); | |
| libcode++; | |
| } | |
| if (PyModule_AddObject(m, "lib_codes_to_names", lib_codes_to_names)) | |
| return; | |
| /* OpenSSL version */ | |
| /* SSLeay() gives us the version of the library linked against, | |
| which could be different from the headers version. | |
| */ | |
| libver = SSLeay(); | |
| r = PyLong_FromUnsignedLong(libver); | |
| if (r == NULL) | |
| return; | |
| if (PyModule_AddObject(m, "OPENSSL_VERSION_NUMBER", r)) | |
| return; | |
| parse_openssl_version(libver, &major, &minor, &fix, &patch, &status); | |
| r = Py_BuildValue("IIIII", major, minor, fix, patch, status); | |
| if (r == NULL || PyModule_AddObject(m, "OPENSSL_VERSION_INFO", r)) | |
| return; | |
| r = PyString_FromString(SSLeay_version(SSLEAY_VERSION)); | |
| if (r == NULL || PyModule_AddObject(m, "OPENSSL_VERSION", r)) | |
| return; | |
| libver = OPENSSL_VERSION_NUMBER; | |
| parse_openssl_version(libver, &major, &minor, &fix, &patch, &status); | |
| r = Py_BuildValue("IIIII", major, minor, fix, patch, status); | |
| if (r == NULL || PyModule_AddObject(m, "_OPENSSL_API_VERSION", r)) | |
| return; | |
| } |