blob: 2b9d35c255cd17627dbe2ef0d321023dfcc61432 [file] [log] [blame]
/*
* Copyright (C) 2019 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
syntax = "proto2";
import "protos/perfetto/trace/track_event/debug_annotation.proto";
import "protos/perfetto/trace/track_event/log_message.proto";
import "protos/perfetto/trace/track_event/task_execution.proto";
import "protos/perfetto/trace/track_event/chrome_active_processes.proto";
import "protos/perfetto/trace/track_event/chrome_application_state_info.proto";
import "protos/perfetto/trace/track_event/chrome_compositor_scheduler_state.proto";
import "protos/perfetto/trace/track_event/chrome_content_settings_event_info.proto";
import "protos/perfetto/trace/track_event/chrome_frame_reporter.proto";
import "protos/perfetto/trace/track_event/chrome_histogram_sample.proto";
import "protos/perfetto/trace/track_event/chrome_keyed_service.proto";
import "protos/perfetto/trace/track_event/chrome_latency_info.proto";
import "protos/perfetto/trace/track_event/chrome_legacy_ipc.proto";
import "protos/perfetto/trace/track_event/chrome_message_pump.proto";
import "protos/perfetto/trace/track_event/chrome_mojo_event_info.proto";
import "protos/perfetto/trace/track_event/chrome_renderer_scheduler_state.proto";
import "protos/perfetto/trace/track_event/chrome_user_event.proto";
import "protos/perfetto/trace/track_event/chrome_window_handle_event_info.proto";
import "protos/perfetto/trace/track_event/pixel_modem.proto";
import "protos/perfetto/trace/track_event/screenshot.proto";
import "protos/perfetto/trace/track_event/source_location.proto";
package perfetto.protos;
// NOTE: Full TrackEvent support in the client lib and chrome is WIP, thus these
// protos are still subject to change. Don't depend on them staying as they are.
// Trace events emitted by client instrumentation library (TRACE_EVENT macros),
// which describe activity on a track, such as a thread or asynchronous event
// track. The track is specified using separate TrackDescriptor messages and
// referred to via the track's UUID.
//
// A simple TrackEvent packet specifies a timestamp, category, name and type:
// ```protobuf
// trace_packet {
// timestamp: 1000
// track_event {
// categories: ["my_cat"]
// name: "my_event"
// type: TYPE_INSTANT
// }
// }
// ```
//
// To associate an event with a custom track (e.g. a thread), the track is
// defined in a separate packet and referred to from the TrackEvent by its UUID:
// ```protobuf
// trace_packet {
// track_descriptor {
// track_uuid: 1234
// name: "my_track"
//
// // Optionally, associate the track with a thread.
// thread_descriptor {
// pid: 10
// tid: 10
// ..
// }
// }
// }
// ```
//
// A pair of TYPE_SLICE_BEGIN and _END events form a slice on the track:
//
// ```protobuf
// trace_packet {
// timestamp: 1200
// track_event {
// track_uuid: 1234
// categories: ["my_cat"]
// name: "my_slice"
// type: TYPE_SLICE_BEGIN
// }
// }
// trace_packet {
// timestamp: 1400
// track_event {
// track_uuid: 1234
// type: TYPE_SLICE_END
// }
// }
// ```
// TrackEvents also support optimizations to reduce data repetition and encoded
// data size, e.g. through data interning (names, categories, ...) and delta
// encoding of timestamps/counters. For details, see the InternedData message.
// Further, default values for attributes of events on the same sequence (e.g.
// their default track association) can be emitted as part of a
// TrackEventDefaults message.
//
// Next reserved id: 13 (up to 15). Next id: 52.
message TrackEvent {
// Names of categories of the event. In the client library, categories are a
// way to turn groups of individual events on or off.
// interned EventCategoryName.
repeated uint64 category_iids = 3;
// non-interned variant.
repeated string categories = 22;
// Optional name of the event for its display in trace viewer. May be left
// unspecified for events with typed arguments.
//
// Note that metrics should not rely on event names, as they are prone to
// changing. Instead, they should use typed arguments to identify the events
// they are interested in.
oneof name_field {
// interned EventName.
uint64 name_iid = 10;
// non-interned variant.
string name = 23;
}
// TODO(eseckler): Support using binary symbols for category/event names.
// Type of the TrackEvent (required if |phase| in LegacyEvent is not set).
enum Type {
TYPE_UNSPECIFIED = 0;
// Slice events are events that have a begin and end timestamp, i.e. a
// duration. They can be nested similar to a callstack: If, on the same
// track, event B begins after event A, but before A ends, B is a child
// event of A and will be drawn as a nested event underneath A in the UI.
// Note that child events should always end before their parents (e.g. B
// before A).
//
// Each slice event is formed by a pair of BEGIN + END events. The END event
// does not need to repeat any TrackEvent fields it has in common with its
// corresponding BEGIN event. Arguments and debug annotations of the BEGIN +
// END pair will be merged during trace import.
//
// Note that we deliberately chose not to support COMPLETE events (which
// would specify a duration directly) since clients would need to delay
// writing them until the slice is completed, which can result in reordered
// events in the trace and loss of unfinished events at the end of a trace.
TYPE_SLICE_BEGIN = 1;
TYPE_SLICE_END = 2;
// Instant events are nestable events without duration. They can be children
// of slice events on the same track.
TYPE_INSTANT = 3;
// Event that provides a value for a counter track. |track_uuid| should
// refer to a counter track and |counter_value| set to the new value. Note
// that most other TrackEvent fields (e.g. categories, name, ..) are not
// supported for TYPE_COUNTER events. See also CounterDescriptor.
TYPE_COUNTER = 4;
}
optional Type type = 9;
// Identifies the track of the event. The default value may be overridden
// using TrackEventDefaults, e.g., to specify the track of the TraceWriter's
// sequence (in most cases sequence = one thread). If no value is specified
// here or in TrackEventDefaults, the TrackEvent will be associated with an
// implicit trace-global track (uuid 0). See TrackDescriptor::uuid.
optional uint64 track_uuid = 11;
// A new value for a counter track. |track_uuid| should refer to a track with
// a CounterDescriptor, and |type| should be TYPE_COUNTER. For a more
// efficient encoding of counter values that are sampled at the beginning/end
// of a slice, see |extra_counter_values| and |extra_counter_track_uuids|.
// Counter values can optionally be encoded in as delta values (positive or
// negative) on each packet sequence (see CounterIncrementalBase).
oneof counter_value_field {
int64 counter_value = 30;
double double_counter_value = 44;
}
// To encode counter values more efficiently, we support attaching additional
// counter values to a TrackEvent of any type. All values will share the same
// timestamp specified in the TracePacket. The value at
// extra_counter_values[N] is for the counter track referenced by
// extra_counter_track_uuids[N].
//
// |extra_counter_track_uuids| may also be set via TrackEventDefaults. There
// should always be equal or more uuids than values. It is valid to set more
// uuids (e.g. via defaults) than values. If uuids are specified in
// TrackEventDefaults and a TrackEvent, the TrackEvent uuids override the
// default uuid list.
//
// For example, this allows snapshotting the thread time clock at each
// thread-track BEGIN and END event to capture the cpu time delta of a slice.
repeated uint64 extra_counter_track_uuids = 31;
repeated int64 extra_counter_values = 12;
// Counter snapshots using floating point instead of integer values.
repeated uint64 extra_double_counter_track_uuids = 45;
repeated double extra_double_counter_values = 46;
// IDs of flows originating, passing through, or ending at this event.
// Flow IDs are global within a trace.
//
// A flow connects a sequence of TrackEvents within or across tracks, e.g.
// an input event may be handled on one thread but cause another event on
// a different thread - a flow between the two events can associate them.
//
// The direction of the flows between events is inferred from the events'
// timestamps. The earliest event with the same flow ID becomes the source
// of the flow. Any events thereafter are intermediate steps of the flow,
// until the flow terminates at the last event with the flow ID.
//
// Flows can also be explicitly terminated (see |terminating_flow_ids|), so
// that the same ID can later be reused for another flow.
// DEPRECATED. Only kept for backwards compatibility. Use |flow_ids|.
repeated uint64 flow_ids_old = 36 [deprecated = true];
// TODO(b/204341740): replace "flow_ids_old" with "flow_ids" to reduce memory
// consumption.
repeated fixed64 flow_ids = 47;
// List of flow ids which should terminate on this event, otherwise same as
// |flow_ids|.
// Any one flow ID should be either listed as part of |flow_ids| OR
// |terminating_flow_ids|, not both.
// DEPRECATED. Only kept for backwards compatibility. Use
// |terminating_flow_ids|.
repeated uint64 terminating_flow_ids_old = 42 [deprecated = true];
// TODO(b/204341740): replace "terminating_flow_ids_old" with
// "terminating_flow_ids" to reduce memory consumption.
repeated fixed64 terminating_flow_ids = 48;
// ---------------------------------------------------------------------------
// TrackEvent arguments:
// ---------------------------------------------------------------------------
// Unstable key/value annotations shown in the trace viewer but not intended
// for metrics use.
repeated DebugAnnotation debug_annotations = 4;
// Typed event arguments:
optional TaskExecution task_execution = 5;
optional LogMessage log_message = 21;
optional ChromeCompositorSchedulerState cc_scheduler_state = 24;
optional ChromeUserEvent chrome_user_event = 25;
optional ChromeKeyedService chrome_keyed_service = 26;
optional ChromeLegacyIpc chrome_legacy_ipc = 27;
optional ChromeHistogramSample chrome_histogram_sample = 28;
optional ChromeLatencyInfo chrome_latency_info = 29;
optional ChromeFrameReporter chrome_frame_reporter = 32;
optional ChromeApplicationStateInfo chrome_application_state_info = 39;
optional ChromeRendererSchedulerState chrome_renderer_scheduler_state = 40;
optional ChromeWindowHandleEventInfo chrome_window_handle_event_info = 41;
optional ChromeContentSettingsEventInfo chrome_content_settings_event_info =
43;
optional ChromeActiveProcesses chrome_active_processes = 49;
optional Screenshot screenshot = 50;
optional PixelModemEventInsight pixel_modem_event_insight = 51;
// This field is used only if the source location represents the function that
// executes during this event.
oneof source_location_field {
// Non-interned field.
SourceLocation source_location = 33;
// Interned field.
uint64 source_location_iid = 34;
}
optional ChromeMessagePump chrome_message_pump = 35;
optional ChromeMojoEventInfo chrome_mojo_event_info = 38;
// New argument types go here :)
// Extension range for typed events defined externally.
// See docs/design-docs/extensions.md for more details.
//
// Extension support is work-in-progress, in the future the way to reserve a
// subrange for a particular project will be described here and in the design
// document linked above.
//
// Contact perfetto-dev@googlegroups.com if you are interested in a subrange
// for your project.
// Extension range reserved for chromium:
// https://source.chromium.org/chromium/chromium/src/+/main:base/tracing/protos/chrome_track_event.proto
extensions 1000 to 1999;
// Extension range reserved for https://b.corp.google.com/issues/301227627.
extensions 2000 to 2000;
// Extension range for future use.
extensions 2001 to 9899;
// Reserved for Perfetto unit and integration tests.
extensions 9900 to 10000;
// ---------------------------------------------------------------------------
// Deprecated / legacy event fields, which will be removed in the future:
// ---------------------------------------------------------------------------
// Deprecated. Use the |timestamp| and |timestamp_clock_id| fields in
// TracePacket instead.
//
// Timestamp in microseconds (usually CLOCK_MONOTONIC).
oneof timestamp {
// Delta timestamp value since the last TrackEvent or ThreadDescriptor. To
// calculate the absolute timestamp value, sum up all delta values of the
// preceding TrackEvents since the last ThreadDescriptor and add the sum to
// the |reference_timestamp| in ThreadDescriptor. This value should always
// be positive.
int64 timestamp_delta_us = 1;
// Absolute value (e.g. a manually specified timestamp in the macro).
// This is a one-off value that does not affect delta timestamp computation
// in subsequent TrackEvents.
int64 timestamp_absolute_us = 16;
}
// Deprecated. Use |extra_counter_values| and |extra_counter_track_uuids| to
// encode thread time instead.
//
// CPU time for the current thread (e.g., CLOCK_THREAD_CPUTIME_ID) in
// microseconds.
oneof thread_time {
// Delta timestamp value since the last TrackEvent or ThreadDescriptor. To
// calculate the absolute timestamp value, sum up all delta values of the
// preceding TrackEvents since the last ThreadDescriptor and add the sum to
// the |reference_timestamp| in ThreadDescriptor. This value should always
// be positive.
int64 thread_time_delta_us = 2;
// This is a one-off absolute value that does not affect delta timestamp
// computation in subsequent TrackEvents.
int64 thread_time_absolute_us = 17;
}
// Deprecated. Use |extra_counter_values| and |extra_counter_track_uuids| to
// encode thread instruction count instead.
//
// Value of the instruction counter for the current thread.
oneof thread_instruction_count {
// Same encoding as |thread_time| field above.
int64 thread_instruction_count_delta = 8;
int64 thread_instruction_count_absolute = 20;
}
// Apart from {category, time, thread time, tid, pid}, other legacy trace
// event attributes are initially simply proxied for conversion to a JSON
// trace. We intend to gradually transition these attributes to similar native
// features in TrackEvent (e.g. async + flow events), or deprecate them
// without replacement where transition is unsuitable.
//
// Next reserved id: 16 (up to 16).
// Next id: 20.
message LegacyEvent {
// Deprecated, use TrackEvent::name(_iid) instead.
// interned EventName.
optional uint64 name_iid = 1;
optional int32 phase = 2;
optional int64 duration_us = 3;
optional int64 thread_duration_us = 4;
// Elapsed retired instruction count during the event.
optional int64 thread_instruction_delta = 15;
// used to be |flags|.
reserved 5;
oneof id {
uint64 unscoped_id = 6;
uint64 local_id = 10;
uint64 global_id = 11;
}
// Additional optional scope for |id|.
optional string id_scope = 7;
// Consider the thread timestamps for async BEGIN/END event pairs as valid.
optional bool use_async_tts = 9;
// Idenfifies a flow. Flow events with the same bind_id are connected.
optional uint64 bind_id = 8;
// Use the enclosing slice as binding point for a flow end event instead of
// the next slice. Flow start/step events always bind to the enclosing
// slice.
optional bool bind_to_enclosing = 12;
enum FlowDirection {
FLOW_UNSPECIFIED = 0;
FLOW_IN = 1;
FLOW_OUT = 2;
FLOW_INOUT = 3;
}
optional FlowDirection flow_direction = 13;
enum InstantEventScope {
SCOPE_UNSPECIFIED = 0;
SCOPE_GLOBAL = 1;
SCOPE_PROCESS = 2;
SCOPE_THREAD = 3;
}
optional InstantEventScope instant_event_scope = 14;
// Override the pid/tid if the writer needs to emit events on behalf of
// another process/thread. This should be the exception. Normally, the
// pid+tid from ThreadDescriptor is used.
optional int32 pid_override = 18;
optional int32 tid_override = 19;
}
optional LegacyEvent legacy_event = 6;
}
// Default values for fields of all TrackEvents on the same packet sequence.
// Should be emitted as part of TracePacketDefaults whenever incremental state
// is cleared. It's defined here because field IDs should match those of the
// corresponding fields in TrackEvent.
message TrackEventDefaults {
optional uint64 track_uuid = 11;
repeated uint64 extra_counter_track_uuids = 31;
repeated uint64 extra_double_counter_track_uuids = 45;
// TODO(eseckler): Support default values for more TrackEvent fields.
}
// --------------------
// Interned data types:
// --------------------
message EventCategory {
optional uint64 iid = 1;
optional string name = 2;
}
message EventName {
optional uint64 iid = 1;
optional string name = 2;
}