| 2002-12-27 Martin Mares <mj@ucw.cz> |
| |
| * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with |
| discontiguous numbering of functions. This is already present in the Linux |
| kernel for several years, but I forgot to update pciutils as well. |
| |
| 2002-12-26 Martin Mares <mj@ucw.cz> |
| |
| * lib/header.h, lspci.c: Dump AGP3 flags and speeds. |
| |
| * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header, |
| there is no reason to prefer the kernel version. |
| |
| * lib/proc.c (proc_scan): Don't forget to initialize hdrtype. |
| |
| * Added preliminary version of NetBSD support by Quentin Garnier |
| <netbsd@quatriemek.com>. |
| |
| 2002-04-06 Martin Mares <mj@ucw.cz> |
| |
| * lspci.c: Mention "-xxx" in the help. |
| |
| 2002-03-30 Martin Mares <mj@ucw.cz> |
| |
| * Released as 2.1.10. |
| |
| * Removed pci.ids from the CVS as they are now maintained separately. |
| They are still included in the tarball, but if you are building pciutils |
| from CVS sources or you want to get a newer ID file than the one distributed, |
| just use "make update-ids" to download the most recent snapshot from |
| pciids.sf.net. |
| |
| * Makefile, README: Updated accordingly. |
| |
| * Makefile: Added a couple of maintenance targets. |
| |
| * maint/*: Maintainer's utilities now reside here (present only in CVS, |
| not in the tarball). |
| |
| * lib/names.c (parse_name_list): End-of-line comments are no longer |
| supported. Hashes are now perfectly valid in all names and they start |
| a comment only at the start of the line. |
| |
| 2002-03-26 Martin Mares <mj@ucw.cz> |
| |
| * README: Rewritten. |
| |
| * Makefile: When the currently installed pci.ids file is newer than |
| the version to be installed, don't overwrite it. Suggested by |
| Jean Delvare <khali@linux-fr.org>. |
| |
| 2002-03-24 Martin Mares <mj@ucw.cz> |
| |
| * lspci.c (show_pcix_bridge): Added PCI-X capability display. |
| Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>. |
| |
| * lib/header.h: Added PCI-X stuff. Again by Jeff. |
| |
| * Makefile (CFLAGS): -Werror is gone. |
| |
| * lspci.c (format_agp_rate): Fixed AGP rate reporting. |
| |
| * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and |
| function 7. |
| |
| * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor |
| or device hexadecimally, don't confuse it with chip vendor/device ID. |
| First reported by Marc Boucher <marc@mbsi.ca>. |
| |
| 2001-11-04 Martin Mares <mj@ucw.cz> |
| |
| * Released as 2.1.9. |
| |
| * pci.ids: Synced with the PCI ID Repository at SourceForge |
| (http://pciids.sourceforge.net/). |
| |
| 2000-08-25 Martin Mares <mj@albireo.ucw.cz> |
| |
| * pci.ids: Updated ID's, synced with kernel 2.4.0-test7. |
| |
| 2000-06-13 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Makefile (uninstall): Fixed. |
| |
| * pci.ids: ID updates. |
| |
| 2000-05-20 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as 2.1.8. |
| |
| * pci.ids: ID updates. |
| |
| * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds. |
| |
| 2000-05-04 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_verbose): If the header type doesn't match device |
| class, just print a warning and still use the header type, assuming |
| bogus class info. |
| |
| 2000-05-01 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_pm): Updated according to PCI PM specs 1.1. |
| |
| * pci.ids: Updated Contemporary Control ARCnet card entries. |
| |
| * pci.ids: Synchronized class list with latest PCI SIG documents. |
| |
| 2000-04-29 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lib/names.c (pci_lookup_name): Fixed the cheat. |
| |
| * lib/internal.h: Moved UNUSED/inline hacks above all other declarations. |
| |
| * pci.ids: Various ID updates. |
| |
| 2000-04-21 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as 2.1.7. |
| |
| * pciutils.spec: Added German description. |
| |
| * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's |
| are the same as device ID and just output subsystem name according to |
| device name. |
| |
| * lib/proc.c: Use UNUSED instead of __attribute__((unused)). |
| |
| * lib/pci.h: Added the correct typedefs for AIX. |
| |
| * lib/generic.c (pci_generic_scan_bus): Export. |
| |
| * lib/configure: Detect AIX. Use "echo '...\c'" instead of |
| "echo -n" if the shell isn't bash. |
| |
| * lspci.c: Avoid using alloca() if not compiled by GCC. |
| (insert_dev): Avoid returning a void value. |
| |
| * Makefile: Choose which install utility to use according to |
| OS type. Also use `-o' instead of `-or' in find arguments. |
| Part of the AIX port. |
| |
| * lib/aix-device.c: Added AIX low-level interface. Contributed |
| by Dave Johnson <ddj@brown.edu>, thanks a lot! |
| |
| * pci.ids: Few new ID's. |
| |
| * pciutils.h, lib/internal.h: Redefine __attribute__ and inline |
| when not compiled by GCC. |
| |
| 2000-04-17 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as 2.1.6. |
| |
| * pci.ids: Added a large batch of ID's contributed by Gunther |
| Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the |
| list with the 2.3.99pre6 kernel. |
| |
| Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lib/example.c: Added a simple example of how to use |
| the library. |
| |
| * lspci.man, setpci.man: Revealed --version. Well spotted |
| by Adam Sulmicki. |
| |
| * pci.ids: Added lots of new ID's and synced with 2.3.50. |
| |
| Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as 2.1.5. |
| |
| * pciutils.spec: Updated spec file from Andreas Jaeger. Now using |
| %{_mandir} to find the right location to install manual pages to. |
| |
| * pci.ids: New ID's. |
| |
| * setpci.c (main): Don't crash when `-s' or `-d' is given with |
| no argument. |
| |
| Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de> |
| |
| * lib/i386-ports.c: Include <asm/io.h> only on systems without |
| glibc. |
| |
| Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Makefile: Modified to work with the Linux FHS brain-damaged idea |
| of putting man pages to /usr/share/man. Now we choose either /usr/man |
| or /usr/share/man depending on which one exists. |
| |
| Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz> |
| |
| * pci.ids: Synced with Linux 2.3.40. |
| |
| * Released as version 2.1.4. |
| |
| Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (scan_device): Fixed bug in reading of cardbus extensions. |
| |
| * lib/proc.c: pread/pwrite fixed again, this time on libc5 :( |
| |
| * lspci.c (format_agp_rate): Better formatting of AGP rates. |
| |
| * pci.ids: New ID's. |
| |
| * lib/configure: Added configuration for ia64 (the same as for Alpha). |
| Patch from Stephane Eranian <eranian@cello.hpl.hp.com>. |
| |
| Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as version 2.1.3. |
| |
| * pci.ids: New ID's. |
| |
| * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli. |
| |
| * lib/access.c: Corrected order of access methods -- it's wonderful how |
| long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff. |
| |
| Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as version 2.1.2. |
| |
| * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's. |
| |
| Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as version 2.1.1. |
| |
| * pci.ids: Several new ID's. |
| |
| * setpci.c (exec_op): Don't forget to increment address after writing |
| single value, so that `30.b=12,34,56,78' works as expected. Reported |
| by Petr Soucek <petr@ryston.cz>. |
| |
| Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_terse): If prog-if is zero, but it's present in the |
| ID list, show it. |
| |
| Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as version 2.1. |
| |
| * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in |
| lots of contributed entries. |
| |
| Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com> |
| |
| * pci.ids: Added lots of subsystem definitions. |
| |
| Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * setpci.man: Better example. |
| |
| * lspci.c: Resolve prog-if names. |
| |
| * lib/names.c: Adapted to new pci.ids syntax. |
| |
| * pci.ids: Reorganized the pci.ids file. Subsystems are listed |
| under devices, classes can optionally contain prog-if information. |
| New ID's, as usually. |
| |
| Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * pci.ids: New ID's. As usually. |
| |
| * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows |
| unless we're vvvery verbose. |
| |
| Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line. |
| |
| Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * pci.ids: New ID's. Again. |
| |
| Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_size): Don't show size if it's zero (usually |
| due to bus-centric mode being enabled). |
| |
| Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lib/pci.h: Types are OS dependent. |
| |
| * lib/internal.h: Byte order hacks are OS dependent. |
| |
| * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS. |
| |
| * lib/Makefile, lib/access.c: Added fbsd-device target. |
| |
| * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID |
| incorrectly set to device ID. |
| |
| * README: Added a note that we support FreeBSD. |
| |
| * Makefile (PREFIX, ROOT): Set it depending on the OS. |
| (%.8): Grrr, BSD date is not able to convert date formats the same way |
| as GNU date does. Use sed instead. |
| (install): Use `-c' when calling install. |
| |
| * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed |
| by Jari Kirma <kirma@cs.hut.fi>. |
| |
| * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread |
| and pwrite only when we are certain it's safe (i.e., glibc 2.1 |
| on all architectures or any libc on a i386 where we really know |
| how to use syscalls directly). In all other cases, emulate it |
| with lseek/read/write. |
| |
| * pci.ids: Some more IDs. |
| |
| Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * pci.ids: Added IDs of parallel port controller cards as sent |
| by Tim Waugh <tim@cyberelk.demon.co.uk>. |
| |
| Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS. |
| |
| * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and |
| HAVE_LONG_ADDRESS. |
| |
| * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses |
| are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS |
| to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS |
| and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS |
| on Alpha. |
| |
| * lspci.c (show_msi): Added dumping of the MSI capability. |
| (show_slotid): The same for SlotID capability. |
| (show_caps): Seperated capability dumping, because it should |
| be used for both htype0 and htype1. Even PCI 2.2 doesn't mention |
| layout of htype2, so I'm a bit unsure about it wrt capabilities |
| -- they at least have to live somewhere else since address 0x34 |
| is already defined differently in htype2. |
| |
| * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2). |
| (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto. |
| (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2. |
| |
| * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers |
| (required by the PCI 2.2 specs). |
| |
| Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_size): Added new function for dumping of region sizes. |
| (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled |
| ROMs et cetera. |
| |
| * lib/pci.h (struct pci_dev): known_fields moved to the public part |
| of the structure. |
| |
| * Added support for region sizes. Needs support in the kernel, because |
| sizes have to be scanned before drivers initialize yourself. pci_fill_info() |
| now returns a bitmask of what fields were really read. |
| |
| Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com> |
| |
| * Makefile: |
| Added `uninstall' target - removes all traces of pciutils. |
| * pci.ids: |
| - Lots of cleanups in the ATI, S3, Adaptec vendors. |
| - Changed Compaq QVision 1280/p definitions, as it's not possible |
| to determine the revision from the device ID. |
| - Same for the Tseng ET4000. |
| The id's said I had a rev C, when it was actually a rev B. |
| - Removed some unnecessary strings |
| `PCI'. Unless it's an AGP card, it should be obvious that it's PCI. |
| `Ethernet card'. This should be determined from config space. |
| - Lots of other new vendors & devices |
| - Other additional small cleanups. |
| |
| Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lib/names.c (pci_lookup_name): When device ID lookup |
| fails, return hexadecimal device ID instead of vendor ID. |
| Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>, |
| I've just extended the fix to subsystem ID's. |
| |
| Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_agp): Bug fix from Petr Vandrovec |
| <vandrove@vc.cvut.cz>. The command register was displayed |
| incorrectly. |
| |
| Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded |
| numbers if not supplied by the libc. |
| |
| Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released the whole package as version 2.0. |
| |
| Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * pci.ids: Added several new ID's contributed by people |
| on the linux-pci list. |
| |
| Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz> |
| |
| * lspci.c: Display I/O addresses correctly on sparc64. |
| * lib/header.h: Ditto. |
| |
| * lib/configure: On sparc set HAVE_64BIT* as well, we want |
| a binary which works on both 32bit and 64bit SPARCs. |
| |
| Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob |
| <mjacob@feral.com>. |
| |
| * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>. |
| |
| Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged |
| as a multi-function device, because several single-function devices |
| don't decode the function bits at all. |
| |
| Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Makefile (install): Don't use "-o root -g root" for installation |
| since it breaks on machines where programs are not installed by root. |
| Reported by Richard Gooch <rgooch@atnf.csiro.au> |
| |
| Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_bases): Use new address masking macros and pciaddr_t. |
| |
| * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit |
| or 64-bit depending on CPU. |
| |
| * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks |
| according to bus address width. |
| |
| Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as 1.99.4. |
| |
| * lspci.c: Capability list parser now recognizes both AGP |
| registers and PCI Power Management registers (the latter |
| is mainly guesswork based on DEC/Intel 21153 bridge specs |
| since I don't have the PCI Power Management document). |
| |
| * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-' |
| by FLAG macro. |
| |
| * lspci.c: Added bridge checks to bus mapping code. |
| |
| Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c: Implemented bus mapping mode (-M). |
| |
| * lspci.c (scan_devices): Split to scan_devices() and scan_device(). |
| (show): Split to show() and show_device(). |
| |
| * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO, |
| set it to the real access method afterwards. |
| |
| Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lib/generic.c (pci_generic_fill_info): If in buscentric mode, |
| don't check PCI_COMMAND for I/O and memory enables. |
| |
| Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Makefile: Added target `release' which substitutes new version |
| number to .spec, .lsm and README. Also rewrote target `dist'. |
| |
| * Released as 1.99.3. |
| |
| Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lib/header.h: Until kernel adopts new layout of PCI |
| includes (i.e., separate declaration of header structure, |
| functions and device IDs), which is not going to happen |
| before 2.3, we'll use our own definiton of the header. |
| |
| * lspci.c (show_verbose): Display `Cap' flag in device status. |
| |
| * lspci.c (show_htype0): Display capability lists whereever |
| available. The only capability name we recognize now is `AGP'. |
| Unfortunately, capabilities are stored in device-dependent |
| portion of the configuration space and are thus available |
| only to root unless you read a dump. |
| |
| * lspci.c (scan_devices): Use cache instead of buffering. |
| |
| * lib/buffer.c: Removed (obsoleted by the cache). |
| |
| * lib/access.c: Added general caching mechanism. |
| |
| Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * pci.ids: Added few devices. |
| |
| Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Version string is now defined in top-level Makefile, exported |
| to the configure script and also substituted to man pages. |
| |
| * lspci.c (show_bases): Rewrote displaying of 64-bit addresses. |
| (show_verbose): Rewrote interrupt display logic. |
| |
| * lib/i386-ports.c: Include sys/io.h only on glibc systems. |
| |
| * lib/configure: Rewrote detection of Linux versions. Now it |
| works on 2.0 kernels (only with direct/dump access, of course). |
| |
| * lib/internal.h: New bytesex macros using <asm/byteorder.h> |
| whenever available. |
| |
| * lib/proc.c (proc_read, proc_write): Distinguish between short |
| read/write and real errors. |
| |
| * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since |
| libpci respects buscentric mode automatically. |
| |
| * lspci.c (show_hex_dump): For CardBus bridges, print out 128 |
| bytes of header (the whole standard part). |
| |
| * common.c: pcilib options are now all uppercase. Also moved |
| PCI access debugging option here. |
| |
| * Released as 1.99.2. |
| |
| Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Wrote configure script and rewrote Makefiles. |
| |
| * Removed few unused variables. |
| |
| Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * common.c: Moved several functions used in both setpci and lspci |
| here. This includes parsing of libpci-related options. |
| |
| * More library tweaks. |
| |
| * filter.c, names.c: Moved to library. |
| |
| * setpci: Rewritten to use the library. |
| |
| * Released as 1.99.1. |
| |
| Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (scan_devices): For cardbus bridges, read first 128 |
| bytes of config space to get full standard header. |
| |
| * Makefile (CFLAGS): Removed "-Wno-unused". |
| |
| * Started the "New Generation" branch and introduced the |
| PCI library. |
| |
| * lspci: Rewritten to use the library. |
| |
| Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as version 1.10. |
| |
| Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.8, setpci.8: Miscellaneous fixes as suggested by |
| Dag Wieers <dag@digibel.be>. |
| |
| Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * pciutils.spec (Name): Update from Krzysztof G. Baranowski. |
| |
| Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Makefile, pciutils.h: Moved pci.ids to /usr/share. |
| |
| * Released as version 1.09. |
| |
| Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind |
| bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report. |
| |
| Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1. |
| |
| Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as version 1.08. |
| |
| * setpci.c: glibc 2.1.x already defines pread() and pwrite(). |
| |
| * lspci.8: Changed warning about lspci -xxx. |
| |
| * lspci.c: Require "-xxx" for full configuration space dump, so that |
| it's impossible to crash the machine by single typo. |
| |
| * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>). |
| |
| Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_bases): Better displaying of unassigned and |
| disabled bases. Thanks to Gabriel Paubert <paubert@iram.es> |
| for an idea. |
| |
| Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC. |
| (thanks to Geert Uytterhoeven for finding this out) |
| |
| Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_verbose): Print subsystem ID using the new resolver. |
| (show_machine): Print subsystem ID. |
| |
| * names.c: New name resolution engine supporting subsystem IDs. |
| |
| * Released as version 1.07. |
| |
| Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_htype2 etc.): Displaying of CardBus headers. |
| (show_bases): Honor the `cnt' argument. |
| (grow_tree): Parse CardBus headers in tree mode as well. |
| |
| * pci.h: Updated CardBus header field description. I still don't |
| have the CardBus standard available, but OZ6832 specs contain |
| full description of all header fields supported by the chip. |
| |
| Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as 1.06. |
| |
| * names.c (parse_name_list): Killed an unused variable. |
| |
| * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1 |
| if they are not defined by glibc (needed for glibc built on older |
| kernels). Ugly. |
| |
| * setpci.c (exec_op): Fixed error messages. Thanks, Steve! |
| |
| Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as 1.05. |
| |
| * setpci.c: Problems with pread()/pwrite() with glibc on Alpha |
| should be gone. Again thanks to Steve for bug report. |
| |
| * filter.c (filter_parse_slot): Fixed ":x" type filters. |
| |
| * pci.ids: Killed duplicate entry. Thanks to Stephen Williams |
| <steve@icarus.com> for reporting this. |
| |
| Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (main), setpci.c (main): Implemented "--version". |
| |
| * Released as 1.04. |
| |
| * pciutils.h (PCIUTILS_VERSION): Added version string. |
| |
| * filter.c, names.c: Extraneous #include <linux/pci.h> removed. |
| Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be> |
| for bug report. |
| |
| Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz> |
| |
| * pci.ids: More updates from Jens Maurer. |
| |
| Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * pci.ids: Updates from Jens Maurer. |
| |
| Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Released as 1.03. |
| |
| * setpci.8: Written. |
| |
| * setpci.c: Finished. |
| |
| * lspci.c: Now able to fetch expansion ROM base from kernel device list |
| and print it if not in buscentric mode. |
| |
| Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * setpci.c: Added. |
| |
| Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.8: Updated the documentation. |
| |
| * lspci.c: Modified to use the new filtering mechanism (options -f and -d). |
| |
| * filter.c: Introduced new generic device filter. |
| |
| Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz> |
| |
| * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying |
| of PCI-to-PCI bridges in the tree format. |
| |
| Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * lspci.c (show_machine): Added non-verbose mode of machine-readable |
| dump. |
| |
| * pci.ids: Updates from Jens Maurer. |
| |
| * Released as version 1.02. |
| |
| Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz> |
| |
| * lspci.c: Added a "-m" switch for dumping machine-readable |
| configuration data (requested by Bjoern Kriews <bkr@cut.de>). |
| |
| Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h> |
| if available. This should avoid all problems with official kernel |
| not synchronized to newer PCI code in CVS -- standard distribution |
| of pciutils now contains pci.h from current CVS kernel, pciutils |
| in CVS contain no pci.h and use the correct kernel include. |
| |
| * Makefile: Fixed installation path for man pages. |
| |
| Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * README: Updated. |
| |
| * lspci.8: Created a man page. |
| |
| * Releasing as version 1.0. |
| |
| Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz> |
| |
| * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx |
| to all the C sources. This should eliminate problems with 32-bit compilers |
| on sparc64. |
| |
| * lspci.c (show_verbose): Recognize CardBus bridge header type. |
| (show_htype2): Stub routine. |
| (scan_config): Write sensible error message if the kernel denies reading of |
| upper part of the PCI config space. |
