| /* | |
| * Copyright (c) 2016, The OpenThread Authors. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. Neither the name of the copyright holder nor the | |
| * names of its contributors may be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE | |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| /** | |
| * @file | |
| * This file implements the tasklet scheduler. | |
| */ | |
| #define WPP_NAME "logging.tmh" | |
| #include "logging.hpp" | |
| #include "common/instance.hpp" | |
| /* | |
| * Verify debug uart dependency. | |
| * | |
| * It is reasonable to only enable the debug uart and not enable logs to the DEBUG uart. | |
| */ | |
| #if (OPENTHREAD_CONFIG_LOG_OUTPUT == OPENTHREAD_CONFIG_LOG_OUTPUT_DEBUG_UART) && (!OPENTHREAD_CONFIG_ENABLE_DEBUG_UART) | |
| #error OPENTHREAD_CONFIG_ENABLE_DEBUG_UART_LOG requires OPENTHREAD_CONFIG_ENABLE_DEBUG_UART | |
| #endif | |
| #ifndef WINDOWS_LOGGING | |
| #define otLogDump(aFormat, ...) \ | |
| _otDynamicLog(aLogLevel, aLogRegion, aFormat OPENTHREAD_CONFIG_LOG_SUFFIX, ##__VA_ARGS__) | |
| #endif | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| #if OPENTHREAD_CONFIG_LOG_PKT_DUMP == 1 | |
| /** | |
| * This static method outputs a line of the memory dump. | |
| * | |
| * @param[in] aLogLevel The log level. | |
| * @param[in] aLogRegion The log region. | |
| * @param[in] aBuf A pointer to the buffer. | |
| * @param[in] aLength Number of bytes in the buffer. | |
| * | |
| */ | |
| static void DumpLine(otLogLevel aLogLevel, otLogRegion aLogRegion, const void *aBuf, const size_t aLength) | |
| { | |
| char buf[80]; | |
| char *cur = buf; | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), "|"); | |
| cur += strlen(cur); | |
| for (size_t i = 0; i < 16; i++) | |
| { | |
| if (i < aLength) | |
| { | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), " %02X", ((uint8_t *)(aBuf))[i]); | |
| cur += strlen(cur); | |
| } | |
| else | |
| { | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), " .."); | |
| cur += strlen(cur); | |
| } | |
| if (!((i + 1) % 8)) | |
| { | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), " |"); | |
| cur += strlen(cur); | |
| } | |
| } | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), " "); | |
| cur += strlen(cur); | |
| for (size_t i = 0; i < 16; i++) | |
| { | |
| char c = 0x7f & ((char *)(aBuf))[i]; | |
| if (i < aLength && isprint(c)) | |
| { | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), "%c", c); | |
| cur += strlen(cur); | |
| } | |
| else | |
| { | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), "."); | |
| cur += strlen(cur); | |
| } | |
| } | |
| otLogDump("%s", buf); | |
| } | |
| void otDump(otLogLevel aLogLevel, otLogRegion aLogRegion, const char *aId, const void *aBuf, const size_t aLength) | |
| { | |
| size_t idlen = strlen(aId); | |
| const size_t width = 72; | |
| char buf[80]; | |
| char * cur = buf; | |
| for (size_t i = 0; i < (width - idlen) / 2 - 5; i++) | |
| { | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), "="); | |
| cur += strlen(cur); | |
| } | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), "[%s len=%03u]", aId, static_cast<uint16_t>(aLength)); | |
| cur += strlen(cur); | |
| for (size_t i = 0; i < (width - idlen) / 2 - 4; i++) | |
| { | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), "="); | |
| cur += strlen(cur); | |
| } | |
| otLogDump("%s", buf); | |
| for (size_t i = 0; i < aLength; i += 16) | |
| { | |
| DumpLine(aLogLevel, aLogRegion, (uint8_t *)(aBuf) + i, (aLength - i) < 16 ? (aLength - i) : 16); | |
| } | |
| cur = buf; | |
| for (size_t i = 0; i < width; i++) | |
| { | |
| snprintf(cur, sizeof(buf) - static_cast<size_t>(cur - buf), "-"); | |
| cur += strlen(cur); | |
| } | |
| otLogDump("%s", buf); | |
| } | |
| #else // OPENTHREAD_CONFIG_LOG_PKT_DUMP | |
| void otDump(otLogLevel, otLogRegion, const char *, const void *, const size_t) | |
| { | |
| } | |
| #endif // OPENTHREAD_CONFIG_LOG_PKT_DUMP | |
| const char *otThreadErrorToString(otError aError) | |
| { | |
| const char *retval; | |
| switch (aError) | |
| { | |
| case OT_ERROR_NONE: | |
| retval = "OK"; | |
| break; | |
| case OT_ERROR_FAILED: | |
| retval = "Failed"; | |
| break; | |
| case OT_ERROR_DROP: | |
| retval = "Drop"; | |
| break; | |
| case OT_ERROR_NO_BUFS: | |
| retval = "NoBufs"; | |
| break; | |
| case OT_ERROR_NO_ROUTE: | |
| retval = "NoRoute"; | |
| break; | |
| case OT_ERROR_BUSY: | |
| retval = "Busy"; | |
| break; | |
| case OT_ERROR_PARSE: | |
| retval = "Parse"; | |
| break; | |
| case OT_ERROR_INVALID_ARGS: | |
| retval = "InvalidArgs"; | |
| break; | |
| case OT_ERROR_SECURITY: | |
| retval = "Security"; | |
| break; | |
| case OT_ERROR_ADDRESS_QUERY: | |
| retval = "AddressQuery"; | |
| break; | |
| case OT_ERROR_NO_ADDRESS: | |
| retval = "NoAddress"; | |
| break; | |
| case OT_ERROR_ABORT: | |
| retval = "Abort"; | |
| break; | |
| case OT_ERROR_NOT_IMPLEMENTED: | |
| retval = "NotImplemented"; | |
| break; | |
| case OT_ERROR_INVALID_STATE: | |
| retval = "InvalidState"; | |
| break; | |
| case OT_ERROR_NO_ACK: | |
| retval = "NoAck"; | |
| break; | |
| case OT_ERROR_CHANNEL_ACCESS_FAILURE: | |
| retval = "ChannelAccessFailure"; | |
| break; | |
| case OT_ERROR_DETACHED: | |
| retval = "Detached"; | |
| break; | |
| case OT_ERROR_FCS: | |
| retval = "FcsErr"; | |
| break; | |
| case OT_ERROR_NO_FRAME_RECEIVED: | |
| retval = "NoFrameReceived"; | |
| break; | |
| case OT_ERROR_UNKNOWN_NEIGHBOR: | |
| retval = "UnknownNeighbor"; | |
| break; | |
| case OT_ERROR_INVALID_SOURCE_ADDRESS: | |
| retval = "InvalidSourceAddress"; | |
| break; | |
| case OT_ERROR_ADDRESS_FILTERED: | |
| retval = "AddressFiltered"; | |
| break; | |
| case OT_ERROR_DESTINATION_ADDRESS_FILTERED: | |
| retval = "DestinationAddressFiltered"; | |
| break; | |
| case OT_ERROR_NOT_FOUND: | |
| retval = "NotFound"; | |
| break; | |
| case OT_ERROR_ALREADY: | |
| retval = "Already"; | |
| break; | |
| case OT_ERROR_IP6_ADDRESS_CREATION_FAILURE: | |
| retval = "Ipv6AddressCreationFailure"; | |
| break; | |
| case OT_ERROR_NOT_CAPABLE: | |
| retval = "NotCapable"; | |
| break; | |
| case OT_ERROR_RESPONSE_TIMEOUT: | |
| retval = "ResponseTimeout"; | |
| break; | |
| case OT_ERROR_DUPLICATED: | |
| retval = "Duplicated"; | |
| break; | |
| case OT_ERROR_REASSEMBLY_TIMEOUT: | |
| retval = "ReassemblyTimeout"; | |
| break; | |
| case OT_ERROR_NOT_TMF: | |
| retval = "NotTmf"; | |
| break; | |
| case OT_ERROR_NOT_LOWPAN_DATA_FRAME: | |
| retval = "NonLowpanDataFrame"; | |
| break; | |
| case OT_ERROR_DISABLED_FEATURE: | |
| retval = "DisabledFeature"; | |
| break; | |
| case OT_ERROR_GENERIC: | |
| retval = "GenericError"; | |
| break; | |
| case OT_ERROR_LINK_MARGIN_LOW: | |
| retval = "LinkMarginLow"; | |
| break; | |
| default: | |
| retval = "UnknownErrorType"; | |
| break; | |
| } | |
| return retval; | |
| } | |
| const char *otLogLevelToPrefixString(otLogLevel aLogLevel) | |
| { | |
| const char *retval = ""; | |
| switch (aLogLevel) | |
| { | |
| case OT_LOG_LEVEL_NONE: | |
| retval = _OT_LEVEL_NONE_PREFIX; | |
| break; | |
| case OT_LOG_LEVEL_CRIT: | |
| retval = _OT_LEVEL_CRIT_PREFIX; | |
| break; | |
| case OT_LOG_LEVEL_WARN: | |
| retval = _OT_LEVEL_WARN_PREFIX; | |
| break; | |
| case OT_LOG_LEVEL_NOTE: | |
| retval = _OT_LEVEL_NOTE_PREFIX; | |
| break; | |
| case OT_LOG_LEVEL_INFO: | |
| retval = _OT_LEVEL_INFO_PREFIX; | |
| break; | |
| case OT_LOG_LEVEL_DEBG: | |
| retval = _OT_LEVEL_DEBG_PREFIX; | |
| break; | |
| } | |
| return retval; | |
| } | |
| #if OPENTHREAD_CONFIG_LOG_OUTPUT == OPENTHREAD_CONFIG_LOG_OUTPUT_NONE | |
| /* this provides a stub, incase something uses the function */ | |
| void otPlatLog(otLogLevel aLogLevel, otLogRegion aLogRegion, const char *aFormat, ...) | |
| { | |
| OT_UNUSED_VARIABLE(aLogLevel); | |
| OT_UNUSED_VARIABLE(aLogRegion); | |
| OT_UNUSED_VARIABLE(aFormat); | |
| } | |
| #endif | |
| #ifdef __cplusplus | |
| }; | |
| #endif |