| # | |
| # Copyright (c) 2016, The OpenThread Authors. | |
| # All rights reserved. | |
| # | |
| # Redistribution and use in source and binary forms, with or without | |
| # modification, are permitted provided that the following conditions are met: | |
| # 1. Redistributions of source code must retain the above copyright | |
| # notice, this list of conditions and the following disclaimer. | |
| # 2. Redistributions in binary form must reproduce the above copyright | |
| # notice, this list of conditions and the following disclaimer in the | |
| # documentation and/or other materials provided with the distribution. | |
| # 3. Neither the name of the copyright holder nor the | |
| # names of its contributors may be used to endorse or promote products | |
| # derived from this software without specific prior written permission. | |
| # | |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE | |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| # POSSIBILITY OF SUCH DAMAGE. | |
| # | |
| # Don't allow this top-level makefile's targets to be built in parallel. | |
| .NOTPARALLEL: | |
| COVERAGE ?= 0 | |
| DEBUG ?= 0 | |
| # Enable most features by default to cover most code | |
| BORDER_AGENT ?= 1 | |
| BORDER_ROUTER ?= 1 | |
| COAP ?= 1 | |
| COAP_BLOCK ?= 1 | |
| COAP_OBSERVE ?= 1 | |
| COAPS ?= 1 | |
| COMMISSIONER ?= 1 | |
| CHANNEL_MANAGER ?= 1 | |
| CHANNEL_MONITOR ?= 1 | |
| CHILD_SUPERVISION ?= 1 | |
| DATASET_UPDATER ?= 1 | |
| DHCP6_CLIENT ?= 1 | |
| DHCP6_SERVER ?= 1 | |
| DIAGNOSTIC ?= 1 | |
| DNS_CLIENT ?= 1 | |
| ECDSA ?= 1 | |
| IP6_FRAGM ?= 1 | |
| JAM_DETECTION ?= 1 | |
| JOINER ?= 1 | |
| LEGACY ?= 1 | |
| LINK_RAW ?= 1 | |
| MAC_FILTER ?= 1 | |
| MTD_NETDIAG ?= 1 | |
| REFERENCE_DEVICE ?= 1 | |
| SERVICE ?= 1 | |
| SNTP_CLIENT ?= 1 | |
| SRP_CLIENT ?= 1 | |
| SRP_SERVER ?= 1 | |
| UDP_FORWARD ?= 1 | |
| COMMONCFLAGS := \ | |
| -g \ | |
| $(NULL) | |
| # If the user has asserted COVERAGE, alter the configuration options | |
| # accordingly. | |
| configure_OPTIONS = \ | |
| --enable-cli \ | |
| --enable-ftd \ | |
| --enable-mtd \ | |
| --enable-ncp \ | |
| --enable-radio-only \ | |
| --with-examples=simulation \ | |
| $(NULL) | |
| # Platform specific switches | |
| ifneq ($(DEBUG),1) | |
| COMMONCFLAGS += \ | |
| -O2 \ | |
| $(NULL) | |
| endif | |
| ifeq ($(NCP_SPI),1) | |
| COMMONCFLAGS += -DOPENTHREAD_CONFIG_NCP_SPI_ENABLE=1 | |
| else | |
| COMMONCFLAGS += -DOPENTHREAD_CONFIG_NCP_UART_ENABLE=1 | |
| endif # NCP_SPI == 1 | |
| ifeq ($(OTNS),1) | |
| VIRTUAL_TIME ?= 1 | |
| endif | |
| ifeq ($(VIRTUAL_TIME),1) | |
| COMMONCFLAGS += -DOPENTHREAD_SIMULATION_VIRTUAL_TIME=1 | |
| endif | |
| ifeq ($(VIRTUAL_TIME_UART),1) | |
| COMMONCFLAGS += -DOPENTHREAD_SIMULATION_VIRTUAL_TIME_UART=1 | |
| endif | |
| ifneq ($(MAX_NETWORK_SIZE),) | |
| COMMONCFLAGS += -DOPENTHREAD_SIMULATION_MAX_NETWORK_SIZE=$(MAX_NETWORK_SIZE) | |
| endif | |
| include $(dir $(abspath $(lastword $(MAKEFILE_LIST))))/common-switches.mk | |
| TopSourceDir := $(dir $(shell readlink $(firstword $(MAKEFILE_LIST)))).. | |
| AbsTopSourceDir := $(dir $(realpath $(firstword $(MAKEFILE_LIST)))).. | |
| CONFIG_FILE = OPENTHREAD_PROJECT_CORE_CONFIG_FILE='\"openthread-core-simulation-config.h\"' | |
| CONFIG_FILE_PATH = $(AbsTopSourceDir)/examples/platforms/simulation/ | |
| COMMONCFLAGS += \ | |
| -D$(CONFIG_FILE) \ | |
| -I$(CONFIG_FILE_PATH) \ | |
| CPPFLAGS += \ | |
| $(COMMONCFLAGS) \ | |
| $(NULL) | |
| CFLAGS += \ | |
| $(COMMONCFLAGS) \ | |
| $(NULL) | |
| CXXFLAGS += \ | |
| $(COMMONCFLAGS) \ | |
| $(NULL) | |
| LDFLAGS += \ | |
| $(COMMONCFLAGS) \ | |
| $(NULL) | |
| ECHO := @echo | |
| INSTALL := /usr/bin/install | |
| INSTALLFLAGS := -p | |
| LN_S := ln -s | |
| MAKE := make | |
| MKDIR_P := mkdir -p | |
| RM_F := rm -f | |
| BuildJobs ?= 10 | |
| BuildPath = build | |
| TopBuildDir = $(BuildPath) | |
| AbsTopBuildDir = $(PWD)/$(TopBuildDir) | |
| ResultPath = output | |
| TopResultDir = $(ResultPath) | |
| AbsTopResultDir = $(PWD)/$(TopResultDir) | |
| TargetTuple = simulation | |
| ifndef BuildJobs | |
| BuildJobs := $(shell getconf _NPROCESSORS_ONLN) | |
| endif | |
| JOBSFLAG := -j$(BuildJobs) | |
| # | |
| # configure-arch <target> | |
| # | |
| # Configure OpenThread for the specified target. | |
| # | |
| # target - The target to configure. | |
| # | |
| define configure-target | |
| $(ECHO) " CONFIG $(1)..." | |
| (cd $(BuildPath)/$(1) && $(AbsTopSourceDir)/configure \ | |
| INSTALL="$(INSTALL) $(INSTALLFLAGS)" \ | |
| CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" CXXFLAGS="$(CXXFLAGS)" LDFLAGS="$(LDFLAGS)" \ | |
| --prefix=/ \ | |
| --exec-prefix=/$(1) \ | |
| $(configure_OPTIONS)) | |
| endef # configure-target | |
| # | |
| # build-target <target> | |
| # | |
| # Build the OpenThread intermediate build products for the specified | |
| # target. | |
| # | |
| # target - The target to build. | |
| # | |
| define build-target | |
| $(ECHO) " BUILD $(1)" | |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ | |
| all | |
| endef # build-target | |
| # | |
| # check-target <target> | |
| # | |
| # Check (run unit tests) OpenThread for the specified target. | |
| # | |
| # target - The target to check. | |
| # | |
| define check-target | |
| $(ECHO) " CHECK $(1)" | |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ | |
| check | |
| endef # check-target | |
| # | |
| # distcheck-target <target> | |
| # | |
| # Check (run unit tests) OpenThread for the specified target. | |
| # | |
| # target - The target to distcheck. | |
| # | |
| define distcheck-target | |
| $(ECHO) " DISTCHECK $(1)" | |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ | |
| distcheck | |
| endef # distcheck-target | |
| # | |
| # coverage-target <target> | |
| # | |
| # Generate code coverage from unit tests for OpenThread for the | |
| # specified target. | |
| # | |
| # target - The target to generate code coverage for. | |
| # | |
| define coverage-target | |
| $(ECHO) " COVERAGE $(1)" | |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ | |
| coverage | |
| endef # coverage-target | |
| # | |
| # stage-target <target> | |
| # | |
| # Stage (install) the OpenThread final build products for the specified | |
| # target. | |
| # | |
| # target - The target to stage. | |
| # | |
| define stage-target | |
| $(ECHO) " STAGE $(1)" | |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ | |
| DESTDIR=$(AbsTopResultDir) \ | |
| install | |
| endef # stage-target | |
| # | |
| # TARGET_template <target> | |
| # | |
| # Define macros, targets and rules to configure, build, and stage | |
| # OpenThread for a single target. | |
| # | |
| # target - The target to instantiate the template for. | |
| # | |
| define TARGET_template | |
| CONFIGURE_TARGETS += configure-$(1) | |
| BUILD_TARGETS += do-build-$(1) | |
| CHECK_TARGETS += check-$(1) | |
| DISTCHECK_TARGETS += distcheck-$(1) | |
| COVERAGE_TARGETS += coverage-$(1) | |
| STAGE_TARGETS += stage-$(1) | |
| BUILD_DIRS += $(BuildPath)/$(1) | |
| DIRECTORIES += $(BuildPath)/$(1) | |
| configure-$(1): $(BuildPath)/$(1)/config.status | |
| $(BuildPath)/$(1)/config.status: | $(BuildPath)/$(1) | |
| $$(call configure-target,$(1)) | |
| do-build-$(1): configure-$(1) | |
| do-build-$(1): | |
| +$$(call build-target,$(1)) | |
| check-$(1): do-build-$(1) | |
| check-$(1): | |
| +$$(call check-target,$(1)) | |
| distcheck-$(1): do-build-$(1) | |
| distcheck-$(1): | |
| +$$(call distcheck-target,$(1)) | |
| coverage-$(1): do-build-$(1) | |
| coverage-$(1): | |
| +$$(call coverage-target,$(1)) | |
| stage-$(1): do-build-$(1) | |
| stage-$(1): | $(TopResultDir) | |
| $$(call stage-target,$(1)) | |
| $(1): stage-$(1) | |
| endef # TARGET_template | |
| .DEFAULT_GOAL := all | |
| all: stage | |
| # Instantiate an target-specific build template for the target. | |
| $(eval $(call TARGET_template,$(TargetTuple))) | |
| # | |
| # Common / Finalization | |
| # | |
| configure: $(CONFIGURE_TARGETS) | |
| build: $(BUILD_TARGETS) | |
| check: $(CHECK_TARGETS) | |
| distcheck: $(DISTCHECK_TARGETS) | |
| coverage: $(COVERAGE_TARGETS) | |
| stage: $(STAGE_TARGETS) | |
| DIRECTORIES = $(TopResultDir) $(TopResultDir)/$(TargetTuple)/lib $(BUILD_DIRS) | |
| CLEAN_DIRS = $(TopResultDir) $(BUILD_DIRS) | |
| all: stage | |
| $(DIRECTORIES): | |
| $(ECHO) " MKDIR $@" | |
| @$(MKDIR_P) "$@" | |
| clean: | |
| $(ECHO) " CLEAN" | |
| @$(RM_F) -r $(CLEAN_DIRS) | |
| help: | |
| $(ECHO) "Simply type 'make -f $(firstword $(MAKEFILE_LIST))' to build OpenThread for the following " | |
| $(ECHO) "target:" | |
| $(ECHO) "" | |
| $(ECHO) " $(TargetTuple)" | |
| $(ECHO) "" |