blob: 06307692c676559dde09497c38abae0152bc928b [file] [log] [blame]
#!/bin/bash
#
# Copyright (C) 2009 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
#
# This script imports new versions of OpenSSL (http://openssl.org/source) into the
# Android source tree. To run, (1) fetch the appropriate tarball from the OpenSSL repository,
# (2) check the gpg/pgp signature, and then (3) run:
# ./import_openssl.sh import openssl-*.tar.gz
#
# IMPORTANT: See README.android for additional details.
# turn on exit on error as well as a warning when it happens
set -e
trap "echo WARNING: Exiting on non-zero subprocess exit code" ERR;
function die() {
declare -r message=$1
echo $message
exit 1
}
function usage() {
declare -r message=$1
if [ ! "$message" = "" ]; then
echo $message
fi
echo "Usage:"
echo " ./import_openssl.sh import </path/to/openssl-*.tar.gz>"
echo " ./import_openssl.sh regenerate <patch/*.patch>"
echo " ./import_openssl.sh generate <patch/*.patch> </path/to/openssl-*.tar.gz>"
exit 1
}
function main() {
if [ ! -d patches ]; then
die "OpenSSL patch directory patches/ not found"
fi
if [ ! -f openssl.version ]; then
die "openssl.version not found"
fi
source openssl.version
if [ "$OPENSSL_VERSION" == "" ]; then
die "Invalid openssl.version; see README.android for more information"
fi
OPENSSL_DIR=openssl-$OPENSSL_VERSION
OPENSSL_DIR_ORIG=$OPENSSL_DIR.orig
if [ ! -f openssl.config ]; then
die "openssl.config not found"
fi
source openssl.config
if [ "$CONFIGURE_ARGS" == "" -o "$UNNEEDED_SOURCES" == "" -o "$NEEDED_SOURCES" == "" ]; then
die "Invalid openssl.config; see README.android for more information"
fi
declare -r command=$1
shift || usage "No command specified. Try import, regenerate, or generate."
if [ "$command" = "import" ]; then
declare -r tar=$1
shift || usage "No tar file specified."
import $tar
elif [ "$command" = "regenerate" ]; then
declare -r patch=$1
shift || usage "No patch file specified."
[ -d $OPENSSL_DIR ] || usage "$OPENSSL_DIR not found, did you mean to use generate?"
[ -d $OPENSSL_DIR_ORIG_ORIG ] || usage "$OPENSSL_DIR_ORIG not found, did you mean to use generate?"
regenerate $patch
elif [ "$command" = "generate" ]; then
declare -r patch=$1
shift || usage "No patch file specified."
declare -r tar=$1
shift || usage "No tar file specified."
generate $patch $tar
else
usage "Unknown command specified $command. Try import, regenerate, or generate."
fi
}
function import() {
declare -r OPENSSL_SOURCE=$1
untar $OPENSSL_SOURCE readonly
applypatches $OPENSSL_DIR
cd $OPENSSL_DIR
# Configure source (and print Makefile defines for review, see README.android)
./Configure $CONFIGURE_ARGS
rm -f apps/CA.pl.bak crypto/opensslconf.h.bak
echo
echo BEGIN Makefile defines to compare with android-config.mk
echo
grep -e -D Makefile | grep -v CONFIGURE_ARGS= | grep -v OPTIONS= | grep -v -e -DOPENSSL_NO_DEPRECATED
echo
echo END Makefile defines to compare with android-config.mk
echo
# TODO(): Fixup android-config.mk
cp -f LICENSE ../NOTICE
touch ../MODULE_LICENSE_BSD_LIKE
# Avoid checking in symlinks
for i in `find include/openssl -type l`; do
target=`readlink $i`
rm -f $i
if [ -f include/openssl/$target ]; then
cp include/openssl/$target $i
fi
done
# Generate arm asm
perl crypto/aes/asm/aes-armv4.pl > crypto/aes/asm/aes-armv4.s
perl crypto/bn/asm/armv4-gf2m.pl > crypto/bn/asm/armv4-gf2m.s
perl crypto/bn/asm/armv4-mont.pl > crypto/bn/asm/armv4-mont.s
perl crypto/modes/asm/ghash-armv4.pl > crypto/modes/asm/ghash-armv4.s
perl crypto/sha/asm/sha1-armv4-large.pl > crypto/sha/asm/sha1-armv4-large.s
perl crypto/sha/asm/sha256-armv4.pl > crypto/sha/asm/sha256-armv4.s
perl crypto/sha/asm/sha512-armv4.pl > crypto/sha/asm/sha512-armv4.s
# Generate mips asm
# The perl scripts expect to run the target compiler as $CC to determine
# the endianess of the target. Setting CC to true is a hack that forces the scripts
# to generate little endian output
CC=true perl crypto/aes/asm/aes-mips.pl o32 > crypto/aes/asm/aes-mips.s
CC=true perl crypto/bn/asm/mips.pl o32 > crypto/bn/asm/bn-mips.s
CC=true perl crypto/bn/asm/mips-mont.pl o32 > crypto/bn/asm/mips-mont.s
CC=true perl crypto/sha/asm/sha1-mips.pl o32 > crypto/sha/asm/sha1-mips.s
CC=true perl crypto/sha/asm/sha512-mips.pl o32 > crypto/sha/asm/sha256-mips.s
# Generate x86 asm
perl crypto/aes/asm/aes-586.pl elf > crypto/aes/asm/aes-586.s
perl crypto/aes/asm/vpaes-x86.pl elf > crypto/aes/asm/vpaes-x86.s
perl crypto/aes/asm/aesni-x86.pl elf > crypto/aes/asm/aesni-x86.s
perl crypto/bn/asm/bn-586.pl elf > crypto/bn/asm/bn-586.s
perl crypto/bn/asm/co-586.pl elf > crypto/bn/asm/co-586.s
perl crypto/bn/asm/x86-mont.pl elf > crypto/bn/asm/x86-mont.s
perl crypto/bn/asm/x86-gf2m.pl elf > crypto/bn/asm/x86-gf2m.s
perl crypto/modes/asm/ghash-x86.pl elf > crypto/modes/asm/ghash-x86.s
perl crypto/sha/asm/sha1-586.pl elf > crypto/sha/asm/sha1-586.s
perl crypto/sha/asm/sha256-586.pl elf > crypto/sha/asm/sha256-586.s
perl crypto/sha/asm/sha512-586.pl elf > crypto/sha/asm/sha512-586.s
perl crypto/md5/asm/md5-586.pl elf > crypto/md5/asm/md5-586.s
perl crypto/des/asm/des-586.pl elf > crypto/des/asm/des-586.s
perl crypto/des/asm/crypt586.pl elf > crypto/des/asm/crypt586.s
perl crypto/bf/asm/bf-586.pl elf > crypto/bf/asm/bf-586.s
# Setup android.testssl directory
mkdir android.testssl
cat test/testssl | \
sed 's#../util/shlib_wrap.sh ./ssltest#adb shell /system/bin/ssltest#' | \
sed 's#../util/shlib_wrap.sh ../apps/openssl#adb shell /system/bin/openssl#' | \
sed 's#adb shell /system/bin/openssl no-dh#[ `adb shell /system/bin/openssl no-dh` = no-dh ]#' | \
sed 's#adb shell /system/bin/openssl no-rsa#[ `adb shell /system/bin/openssl no-rsa` = no-dh ]#' | \
sed 's#../apps/server2.pem#/sdcard/android.testssl/server2.pem#' | \
cat > \
android.testssl/testssl
chmod +x android.testssl/testssl
cat test/Uss.cnf | sed 's#./.rnd#/sdcard/android.testssl/.rnd#' >> android.testssl/Uss.cnf
cat test/CAss.cnf | sed 's#./.rnd#/sdcard/android.testssl/.rnd#' >> android.testssl/CAss.cnf
cp apps/server2.pem android.testssl/
cp ../patches/testssl.sh android.testssl/
cd ..
# Prune unnecessary sources
prune
NEEDED_SOURCES="$NEEDED_SOURCES android.testssl"
for i in $NEEDED_SOURCES; do
echo "Updating $i"
rm -r $i
mv $OPENSSL_DIR/$i .
done
cleantar
}
function regenerate() {
declare -r patch=$1
generatepatch $patch
}
function generate() {
declare -r patch=$1
declare -r OPENSSL_SOURCE=$2
untar $OPENSSL_SOURCE
applypatches $OPENSSL_DIR_ORIG $patch
prune
for i in $NEEDED_SOURCES; do
echo "Restoring $i"
rm -r $OPENSSL_DIR/$i
cp -rf $i $OPENSSL_DIR/$i
done
generatepatch $patch
cleantar
}
function untar() {
declare -r OPENSSL_SOURCE=$1
declare -r readonly=$2
# Remove old source
cleantar
# Process new source
tar -zxf $OPENSSL_SOURCE
mv $OPENSSL_DIR $OPENSSL_DIR_ORIG
if [ ! -z $readonly ]; then
find $OPENSSL_DIR_ORIG -type f -print0 | xargs -0 chmod a-w
fi
tar -zxf $OPENSSL_SOURCE
}
function prune() {
echo "Removing $UNNEEDED_SOURCES"
(cd $OPENSSL_DIR_ORIG && rm -rf $UNNEEDED_SOURCES)
(cd $OPENSSL_DIR && rm -r $UNNEEDED_SOURCES)
}
function cleantar() {
rm -rf $OPENSSL_DIR_ORIG
rm -rf $OPENSSL_DIR
}
function applypatches () {
declare -r dir=$1
declare -r skip_patch=$2
cd $dir
# Apply appropriate patches
for i in $OPENSSL_PATCHES; do
if [ ! "$skip_patch" = "patches/$i" ]; then
echo "Applying patch $i"
patch -p1 < ../patches/$i || die "Could not apply patches/$i. Fix source and run: $0 regenerate patches/$i"
else
echo "Skiping patch $i"
fi
done
# Cleanup patch output
find . \( -type f -o -type l \) -name "*.orig" -print0 | xargs -0 rm -f
cd ..
}
function generatepatch() {
declare -r patch=$1
# Cleanup stray files before generating patch
find $BOUNCYCASTLE_DIR -type f -name "*.orig" -print0 | xargs -0 rm -f
find $BOUNCYCASTLE_DIR -type f -name "*~" -print0 | xargs -0 rm -f
declare -r variable_name=OPENSSL_PATCHES_`basename $patch .patch | sed s/-/_/`_SOURCES
# http://tldp.org/LDP/abs/html/ivr.html
eval declare -r sources=\$$variable_name
rm -f $patch
touch $patch
for i in $sources; do
LC_ALL=C TZ=UTC0 diff -aup $OPENSSL_DIR_ORIG/$i $OPENSSL_DIR/$i >> $patch && die "ERROR: No diff for patch $path in file $i"
done
echo "Generated patch $patch"
echo "NOTE To make sure there are not unwanted changes from conflicting patches, be sure to review the generated patch."
}
main $@