blob: b76c7c96a03d02cce6511e29d96f7d5c3ab03ef3 [file] [log] [blame]
char netcpu_looper_id[]="\
@(#)netcpu_looper.c (c) Copyright 2005-2007. Version 2.4.3";
/* netcpu_looper.c
Implement the soaker process specific portions of netperf CPU
utilization measurements. These are broken-out into a separate file
to make life much nicer over in netlib.c which had become a maze of
twisty, CPU-util-related, #ifdefs, all different. raj 2005-01-26
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#include <stdio.h>
#ifdef HAVE_FCNTL_H
# include <fcntl.h>
#endif
#if HAVE_UNISTD_H
# include <unistd.h>
#endif
#if defined(HAVE_MMAP) || defined(HAVE_SYS_MMAN_H)
# include <sys/mman.h>
#else
# error netcpu_looper requires mmap
#endif
#if TIME_WITH_SYS_TIME
# include <sys/time.h>
# include <time.h>
#else
# if HAVE_SYS_TIME_H
# include <sys/time.h>
# else
# include <time.h>
# endif
#endif
#if HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#if HAVE_SYS_WAIT_H
# include <sys/wait.h>
#endif
#ifdef HAVE_SIGNAL_H
#include <signal.h>
#endif
#ifdef HAVE_ERRNO_H
#include <errno.h>
#endif
#include "netsh.h"
#include "netlib.h"
#define PAGES_PER_CHILD 2
/* the lib_start_count and lib_end_count arrays hold the starting
and ending values of whatever is counting when the system is
idle. The rate at which this increments during a test is compared
with a previous calibrarion to arrive at a CPU utilization
percentage. raj 2005-01-26 */
static uint64_t lib_start_count[MAXCPUS];
static uint64_t lib_end_count[MAXCPUS];
static int *cpu_mappings;
static int lib_idle_fd;
static uint64_t *lib_idle_address[MAXCPUS];
static long *lib_base_pointer;
static pid_t lib_idle_pids[MAXCPUS];
static int lib_loopers_running=0;
/* we used to use this code to bind the loopers, but since we have
decided to enable processor affinity for the actual
netperf/netserver processes we will use that affinity routine,
which happens to know about more systems than this */
#ifdef NOTDEF
static void
bind_to_processor(int child_num)
{
/* This routine will bind the calling process to a particular */
/* processor. We are not choosy as to which processor, so it will be */
/* the process id mod the number of processors - shifted by one for */
/* those systems which name processor starting from one instead of */
/* zero. on those systems where I do not yet know how to bind a */
/* process to a processor, this routine will be a no-op raj 10/95 */
/* just as a reminder, this is *only* for the looper processes, not */
/* the actual measurement processes. those will, should, MUST float */
/* or not float from CPU to CPU as controlled by the operating */
/* system defaults. raj 12/95 */
#ifdef __hpux
#include <sys/syscall.h>
#include <sys/mp.h>
int old_cpu = -2;
if (debug) {
fprintf(where,
"child %d asking for CPU %d as pid %d with %d CPUs\n",
child_num,
(child_num % lib_num_loc_cpus),
getpid(),
lib_num_loc_cpus);
fflush(where);
}
SETPROCESS((child_num % lib_num_loc_cpus), getpid());
return;
#else
#if defined(__sun) && defined(__SVR4)
/* should only be Solaris */
#include <sys/processor.h>
#include <sys/procset.h>
int old_binding;
if (debug) {
fprintf(where,
"bind_to_processor: child %d asking for CPU %d as pid %d with %d CPUs\n",
child_num,
(child_num % lib_num_loc_cpus),
getpid(),
lib_num_loc_cpus);
fflush(where);
}
if (processor_bind(P_PID,
getpid(),
(child_num % lib_num_loc_cpus),
&old_binding) != 0) {
fprintf(where,"bind_to_processor: unable to perform processor binding\n");
fprintf(where," errno %d\n",errno);
fflush(where);
}
return;
#else
#ifdef WIN32
if (!SetThreadAffinityMask(GetCurrentThread(), (ULONG_PTR)1 << (child_num % lib_num_loc_cpus))) {
perror("SetThreadAffinityMask failed");
fflush(stderr);
}
if (debug) {
fprintf(where,
"bind_to_processor: child %d asking for CPU %d of %d CPUs\n",
child_num,
(child_num % lib_num_loc_cpus),
lib_num_loc_cpus);
fflush(where);
}
#endif
return;
#endif /* __sun && _SVR4 */
#endif /* __hpux */
}
#endif
/* sit_and_spin will just spin about incrementing a value */
/* this value will either be in a memory mapped region on Unix shared */
/* by each looper process, or something appropriate on Windows/NT */
/* (malloc'd or such). This routine is reasonably ugly in that it has */
/* priority manipulating code for lots of different operating */
/* systems. This routine never returns. raj 1/96 */
static void
sit_and_spin(int child_index)
{
uint64_t *my_counter_ptr;
/* only use C stuff if we are not WIN32 unless and until we */
/* switch from CreateThread to _beginthread. raj 1/96 */
#ifndef WIN32
/* we are the child. we could decide to exec some separate */
/* program, but that doesn't really seem worthwhile - raj 4/95 */
if (debug > 1) {
fprintf(where,
"Looper child %d is born, pid %d\n",
child_index,
getpid());
fflush(where);
}
#endif /* WIN32 */
/* reset our base pointer to be at the appropriate offset */
my_counter_ptr = (uint64_t *) ((char *)lib_base_pointer +
(netlib_get_page_size() *
PAGES_PER_CHILD * child_index));
/* in the event we are running on an MP system, it would */
/* probably be good to bind the soaker processes to specific */
/* processors. I *think* this is the most reasonable thing to */
/* do, and would be closes to simulating the information we get */
/* on HP-UX with pstat. I could put all the system-specific code */
/* here, but will "abstract it into another routine to keep this */
/* area more readable. I'll probably do the same thine with the */
/* "low pri code" raj 10/95 */
/* since we are "flying blind" wrt where we should bind the looper
processes, we want to use the cpu_map that was prepared by netlib
rather than assume that the CPU ids on the system start at zero
and are contiguous. raj 2006-04-03 */
bind_to_specific_processor(child_index % lib_num_loc_cpus,1);
for (*my_counter_ptr = 0L;
;
(*my_counter_ptr)++) {
if (!(*lib_base_pointer % 1)) {
/* every once and again, make sure that our process priority is */
/* nice and low. also, by making system calls, it may be easier */
/* for us to be pre-empted by something that needs to do useful */
/* work - like the thread of execution actually sending and */
/* receiving data across the network :) */
#ifdef _AIX
int pid,prio;
prio = PRIORITY;
pid = getpid();
/* if you are not root, this call will return EPERM - why one */
/* cannot change one's own priority to lower value is beyond */
/* me. raj 2/26/96 */
setpri(pid, prio);
#else /* _AIX */
#ifdef __sgi
int pid,prio;
prio = PRIORITY;
pid = getpid();
schedctl(NDPRI, pid, prio);
sginap(0);
#else /* __sgi */
#ifdef WIN32
SetThreadPriority(GetCurrentThread(),THREAD_PRIORITY_IDLE);
#else /* WIN32 */
#if defined(__sun) && defined(__SVR4)
#include <sys/types.h>
#include <sys/priocntl.h>
#include <sys/rtpriocntl.h>
#include <sys/tspriocntl.h>
/* I would *really* like to know how to use priocntl to make the */
/* priority low for this looper process. however, either my mind */
/* is addled, or the manpage in section two for priocntl is not */
/* terribly helpful - for one, it has no examples :( so, if you */
/* can help, I'd love to hear from you. in the meantime, we will */
/* rely on nice(39). raj 2/26/96 */
nice(39);
#else /* __sun && __SVR4 */
nice(39);
#endif /* __sun && _SVR4 */
#endif /* WIN32 */
#endif /* __sgi */
#endif /* _AIX */
}
}
}
/* this routine will start all the looper processes or threads for */
/* measuring CPU utilization. */
static void
start_looper_processes()
{
unsigned int i, file_size;
/* we want at least two pages for each processor. the */
/* child for any one processor will write to the first of his two */
/* pages, and the second page will be a buffer in case there is page */
/* prefetching. if your system pre-fetches more than a single page, */
/* well, you'll have to modify this or live with it :( raj 4/95 */
file_size = ((netlib_get_page_size() * PAGES_PER_CHILD) *
lib_num_loc_cpus);
#ifndef WIN32
/* we we are not using WINDOWS NT (or 95 actually :), then we want */
/* to create a memory mapped region so we can see all the counting */
/* rates of the loopers */
/* could we just use an anonymous memory region for this? it is */
/* possible that using a mmap()'ed "real" file, while convenient for */
/* debugging, could result in some filesystem activity - like */
/* metadata updates? raj 4/96 */
lib_idle_fd = open("/tmp/netperf_cpu",O_RDWR | O_CREAT | O_EXCL);
if (lib_idle_fd == -1) {
fprintf(where,"create_looper: file creation; errno %d\n",errno);
fflush(where);
exit(1);
}
if (chmod("/tmp/netperf_cpu",0644) == -1) {
fprintf(where,"create_looper: chmod; errno %d\n",errno);
fflush(where);
exit(1);
}
/* with the file descriptor in place, lets be sure that the file is */
/* large enough. */
if (truncate("/tmp/netperf_cpu",file_size) == -1) {
fprintf(where,"create_looper: truncate: errno %d\n",errno);
fflush(where);
exit(1);
}
/* the file should be large enough now, so we can mmap it */
/* if the system does not have MAP_VARIABLE, just define it to */
/* be zero. it is only used/needed on HP-UX (?) raj 4/95 */
#ifndef MAP_VARIABLE
#define MAP_VARIABLE 0x0000
#endif /* MAP_VARIABLE */
#ifndef MAP_FILE
#define MAP_FILE 0x0000
#endif /* MAP_FILE */
if ((lib_base_pointer = (long *)mmap(NULL,
file_size,
PROT_READ | PROT_WRITE,
MAP_FILE | MAP_SHARED | MAP_VARIABLE,
lib_idle_fd,
0)) == (long *)-1) {
fprintf(where,"create_looper: mmap: errno %d\n",errno);
fflush(where);
exit(1);
}
if (debug > 1) {
fprintf(where,"num CPUs %d, file_size %d, lib_base_pointer %p\n",
lib_num_loc_cpus,
file_size,
lib_base_pointer);
fflush(where);
}
/* we should have a valid base pointer. lets fork */
for (i = 0; i < (unsigned int)lib_num_loc_cpus; i++) {
switch (lib_idle_pids[i] = fork()) {
case -1:
perror("netperf: fork");
exit(1);
case 0:
/* we are the child. we could decide to exec some separate */
/* program, but that doesn't really seem worthwhile - raj 4/95 */
signal(SIGTERM, SIG_DFL);
sit_and_spin(i);
/* we should never really get here, but if we do, just exit(0) */
exit(0);
break;
default:
/* we must be the parent */
lib_idle_address[i] = (uint64_t *) ((char *)lib_base_pointer +
(netlib_get_page_size() *
PAGES_PER_CHILD * i));
if (debug) {
fprintf(where,"lib_idle_address[%d] is %p\n",
i,
lib_idle_address[i]);
fflush(where);
}
}
}
#else
/* we are compiled -DWIN32 */
if ((lib_base_pointer = malloc(file_size)) == NULL) {
fprintf(where,
"create_looper_process could not malloc %d bytes\n",
file_size);
fflush(where);
exit(1);
}
/* now, create all the threads */
for(i = 0; i < (unsigned int)lib_num_loc_cpus; i++) {
long place_holder;
if ((lib_idle_pids[i] = CreateThread(0,
0,
(LPTHREAD_START_ROUTINE)sit_and_spin,
(LPVOID)(ULONG_PTR)i,
0,
&place_holder)) == NULL ) {
fprintf(where,
"create_looper_process: CreateThread failed\n");
fflush(where);
/* I wonder if I need to look for other threads to kill? */
exit(1);
}
lib_idle_address[i] = (long *) ((char *)lib_base_pointer +
(netlib_get_page_size() *
PAGES_PER_CHILD * i));
if (debug) {
fprintf(where,"lib_idle_address[%d] is %p\n",
i,
lib_idle_address[i]);
fflush(where);
}
}
#endif /* WIN32 */
/* we need to have the looper processes settled-in before we do */
/* anything with them, so lets sleep for say 30 seconds. raj 4/95 */
sleep(30);
}
void
cpu_util_init(void)
{
cpu_method = LOOPER;
/* we want to get the looper processes going */
if (!lib_loopers_running) {
start_looper_processes();
lib_loopers_running = 1;
}
return;
}
/* clean-up any left-over CPU util resources - looper processes,
files, whatever. raj 2005-01-26 */
void
cpu_util_terminate() {
#ifdef WIN32
/* it would seem that if/when the process exits, all the threads */
/* will go away too, so I don't think I need any explicit thread */
/* killing calls here. raj 1/96 */
#else
int i;
/* now go through and kill-off all the child processes */
for (i = 0; i < lib_num_loc_cpus; i++){
/* SIGKILL can leave core files behind - thanks to Steinar Haug */
/* for pointing that out. */
kill(lib_idle_pids[i],SIGTERM);
}
lib_loopers_running = 0;
/* reap the children */
while(waitpid(-1, NULL, WNOHANG) > 0) { }
/* finally, unlink the mmaped file */
munmap((caddr_t)lib_base_pointer,
((netlib_get_page_size() * PAGES_PER_CHILD) *
lib_num_loc_cpus));
unlink("/tmp/netperf_cpu");
#endif
return;
}
int
get_cpu_method(void)
{
return LOOPER;
}
/* calibrate_looper */
/* Loop a number of iterations, sleeping interval seconds each and */
/* count how high the idle counter gets each time. Return the */
/* measured cpu rate to the calling routine. raj 4/95 */
float
calibrate_idle_rate (int iterations, int interval)
{
uint64_t
firstcnt[MAXCPUS],
secondcnt[MAXCPUS];
float
elapsed,
temp_rate,
rate[MAXTIMES],
local_maxrate;
long
sec,
usec;
int
i,
j;
struct timeval time1, time2 ;
struct timezone tz;
if (iterations > MAXTIMES) {
iterations = MAXTIMES;
}
local_maxrate = (float)-1.0;
for(i = 0; i < iterations; i++) {
rate[i] = (float)0.0;
for (j = 0; j < lib_num_loc_cpus; j++) {
firstcnt[j] = *(lib_idle_address[j]);
}
gettimeofday (&time1, &tz);
sleep(interval);
gettimeofday (&time2, &tz);
if (time2.tv_usec < time1.tv_usec)
{
time2.tv_usec += 1000000;
time2.tv_sec -=1;
}
sec = time2.tv_sec - time1.tv_sec;
usec = time2.tv_usec - time1.tv_usec;
elapsed = (float)sec + ((float)usec/(float)1000000.0);
if(debug) {
fprintf(where, "Calibration for counter run: %d\n",i);
fprintf(where,"\tsec = %ld usec = %ld\n",sec,usec);
fprintf(where,"\telapsed time = %g\n",elapsed);
}
for (j = 0; j < lib_num_loc_cpus; j++) {
secondcnt[j] = *(lib_idle_address[j]);
if(debug) {
/* I know that there are situations where compilers know about */
/* long long, but the library fucntions do not... raj 4/95 */
fprintf(where,
"\tfirstcnt[%d] = 0x%8.8lx%8.8lx secondcnt[%d] = 0x%8.8lx%8.8lx\n",
j,
(uint32_t)(firstcnt[j]>>32),
(uint32_t)(firstcnt[j]&0xffffffff),
j,
(uint32_t)(secondcnt[j]>>32),
(uint32_t)(secondcnt[j]&0xffffffff));
}
/* we assume that it would wrap no more than once. we also */
/* assume that the result of subtracting will "fit" raj 4/95 */
temp_rate = (secondcnt[j] >= firstcnt[j]) ?
(float)(secondcnt[j] - firstcnt[j])/elapsed :
(float)(secondcnt[j]-firstcnt[j]+MAXLONG)/elapsed;
if (temp_rate > rate[i]) rate[i] = temp_rate;
if(debug) {
fprintf(where,"\trate[%d] = %g\n",i,rate[i]);
fflush(where);
}
if (local_maxrate < rate[i]) local_maxrate = rate[i];
}
}
if(debug) {
fprintf(where,"\tlocal maxrate = %g per sec. \n",local_maxrate);
fflush(where);
}
return local_maxrate;
}
void
get_cpu_idle (uint64_t *res)
{
int i;
for (i = 0; i < lib_num_loc_cpus; i++){
res[i] = *lib_idle_address[i];
}
}
float
calc_cpu_util_internal(float elapsed_time)
{
int i;
float correction_factor;
float actual_rate;
lib_local_cpu_util = (float)0.0;
/* It is possible that the library measured a time other than */
/* the one that the user want for the cpu utilization */
/* calculations - for example, tests that were ended by */
/* watchdog timers such as the udp stream test. We let these */
/* tests tell up what the elapsed time should be. */
if (elapsed_time != 0.0) {
correction_factor = (float) 1.0 +
((lib_elapsed - elapsed_time) / elapsed_time);
}
else {
correction_factor = (float) 1.0;
}
for (i = 0; i < lib_num_loc_cpus; i++) {
/* it would appear that on some systems, in loopback, nice is
*very* effective, causing the looper process to stop dead in its
tracks. if this happens, we need to ensure that the calculation
does not go south. raj 6/95 and if we run completely out of idle,
the same thing could in theory happen to the USE_KSTAT path. raj
8/2000 */
if (lib_end_count[i] == lib_start_count[i]) {
lib_end_count[i]++;
}
actual_rate = (lib_end_count[i] > lib_start_count[i]) ?
(float)(lib_end_count[i] - lib_start_count[i])/lib_elapsed :
(float)(lib_end_count[i] - lib_start_count[i] +
MAXLONG)/ lib_elapsed;
if (debug) {
fprintf(where,
"calc_cpu_util: actual_rate on processor %d is %f start 0x%8.8lx%8.8lx end 0x%8.8lx%8.8lx\n",
i,
actual_rate,
(uint32_t)(lib_start_count[i]>>32),
(uint32_t)(lib_start_count[i]&0xffffffff),
(uint32_t)(lib_end_count[i]>>32),
(uint32_t)(lib_end_count[i]&0xffffffff));
}
lib_local_per_cpu_util[i] = (lib_local_maxrate - actual_rate) /
lib_local_maxrate * 100;
lib_local_cpu_util += lib_local_per_cpu_util[i];
}
/* we want the average across all n processors */
lib_local_cpu_util /= (float)lib_num_loc_cpus;
lib_local_cpu_util *= correction_factor;
return lib_local_cpu_util;
}
void
cpu_start_internal(void)
{
get_cpu_idle(lib_start_count);
return;
}
void
cpu_stop_internal(void)
{
get_cpu_idle(lib_end_count);
}