| mtools (4.0.37) stable; urgency=low |
| |
| * Removed mclasserase commands, which doesn't fit the coding |
| structure of the rest of mtools |
| * Add support to -i option to mcd |
| * Document -i in mtools.1 |
| * Fix a missing commad error in floppyd_io.c |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 26 Dec 2021 18:57:02 +0100 |
| mtools (4.0.36) stable; urgency=low |
| |
| * Fix error status of recursive listing of empty root directory |
| * If recursive listing, also show matched files at level one |
| * Use "seekless" reads & write internally, where possible |
| * Text mode conversion refactoring |
| * Misc refactoring |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 21 Nov 2021 16:41:10 +0100 |
| mtools (4.0.35) stable; urgency=low |
| |
| * Fix cluster padding at end of file in batch mode, and add comments |
| about what happens here |
| |
| -- Alain Knaff <alain@knaff.lu> Fri, 6 Aug 2021 20:13:59 +0200 |
| mtools (4.0.34) stable; urgency=low |
| |
| * Fix mcopy -s issue |
| |
| -- Alain Knaff <alain@knaff.lu> Fri, 23 Jul 2021 12:41:11 +0200 |
| mtools (4.0.33) stable; urgency=low |
| |
| * Fix support for partitions (broken in 4.0.30) |
| * Portability fixes for Solaris 10 and 11 |
| * General simplification of configure script, and largefile handling |
| * Tested and fixed for platforms *without* largefile support |
| * In cases where lseek works with 32-bit offsets, prefer lseek64 over llseek |
| * Fixed floppy sector size handling on platforms that are not Linux |
| * Added support for image files on command line to mcat |
| |
| -- Alain Knaff <alain@knaff.lu> Sat, 17 Jul 2021 18:31:38 +0200 |
| mtools (4.0.32) stable; urgency=low |
| |
| * Simplify algorithm that choses filesystem parameters for format, and align |
| it more closely with what Win7 does |
| |
| * Fix mformatting XDF when XDF not explicitly specified on mformat command |
| line |
| |
| * easier way to enter sizes on mformat command line (mformat -C -T 1440K) |
| |
| * For small sizes, mformat assumes floppy geometries (heads 1 or 2, |
| tracks 40 or 80) |
| |
| * Handle attempts to mformat too small filesystems more gracefully |
| |
| * Enable minfo to print out additional mformat command line parameters, if |
| the present filesystem uses non-default values for these |
| |
| * minfo no longer prints bigsect if smallsect is set |
| |
| * for remap filter, error when trying to write non-zero data to unmapped |
| sectors |
| |
| * Fix misc compilation warnings occuring when disabling certain features |
| (largefiles, raw-term) |
| |
| -- Alain Knaff <alain@knaff.lu> Sat, 10 Jul 2021 14:31:23 +0200 |
| mtools (4.0.31) stable; urgency=low |
| |
| * Move Linux-specific block device sizing code into |
| linux-specific section of devices.c |
| * Error messages for all failure cases on fs_init failure |
| * Fix compilation without XDF support (OpenImage signature) |
| * Fix polarity of format_xdf command-line parameter of mformat |
| * In XDF_IO retry enough times to actually succeed, even if |
| FDC was in a bad state before |
| * Remove useless buffer flushing triggered when giving up a |
| reference to a stream node that is still referenced |
| elsewhere. |
| * Clearer error message if neither size nor geometry of drive |
| to be mformatted is known |
| * In mformat, make Fs dynamically allocated rather than |
| on-stack, so as to be able to use utilities supplied by |
| stream.c |
| * Remove duplicate writing of backup boot sector |
| * Allow to infer geometry if only size is specified |
| * Protect against attempt to create zero-sized buffer |
| * Code simplification in mattrib |
| * Remove dead code in mpartition |
| |
| -- Alain Knaff <alain@knaff.lu> Sat, 19 Jun 2021 17:22:27 +0200 |
| mtools (4.0.30) stable; urgency=low |
| |
| * Fixed XDF floppy disk access |
| * Fixed faulty behavior at end of image in mcat |
| * Device/Image size handling refactoring |
| * allow remap to write to zero-backed sectors (may happen if |
| buffer is flushed, and is not an error in that case) |
| * Raise an error when trying to mcopy multiple source files |
| over a single destination file (rather than directory) |
| * fix handling of "hidden" sectors (is a 2 byte quantity on |
| small disks, not 4 byte as previously assumed) |
| * Modernize partition support. Tuned consistency check to |
| actually check about important issues (such as overlapping |
| partitions) rather than stuff nobody else cares about |
| (alignment on entire cylinder boundaries) |
| * Move various "filter" options (partition, offset, swap, |
| scsi) into separate classes, rather than leaving almost |
| everything in plain_io |
| * Simplify and centralize geometry handling and LBA code |
| * Fix some more more compiler warnings |
| |
| -- Alain Knaff <alain@knaff.lu> Thu, 17 Jun 2021 22:23:39 +0200 |
| mtools (4.0.29) stable; urgency=low |
| |
| * -Fix bug in cluster preallocation, which was accidentally introduced by compiler warning "fixes" from v4_0_28 |
| |
| -- Alain Knaff <alain@knaff.lu> Mon, 31 May 2021 19:07:43 +0200 |
| mtools (4.0.28) stable; urgency=low |
| |
| * Support remapping of data (for not-quite linear floppy image files) |
| * Re-open floppy devices read-write if geometry parameters need to be changed |
| * relax consistency checks in mpartition (partitions created by current fdisk would almost never pass these checks) |
| * Fix some compiler warnings |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 30 May 2021 18:33:09 +0200 |
| mtools (4.0.27) stable; urgency=low |
| * Fix type error in calls to iconv functions |
| |
| -- Alain Knaff <alain@knaff.lu> Fri, 16 Apr 2021 20:54:49 +0200 |
| mtools (4.0.26) stable; urgency=low |
| * Fix compilation on Macintosh |
| * Ignore image file locking errors if we are performing a read-only access anyways |
| * Minor man-page fixes |
| -- Alain Knaff <alain@knaff.lu> Sat, 28 Nov 2020 12:46:04 +0100 |
| mtools (4.0.25) stable; urgency=low |
| * Preserve non-updated contents of info sector, just in case it contains program code |
| * When parsing config file, always use "C" locale for case-insensitive comparisons |
| -- Alain Knaff <alain@knaff.lu> Sat, 24 Oct 2020 16:53:52 +0200 |
| mtools (4.0.24) stable; urgency=low |
| * Spelling fixes in documentation |
| * Permit calling "make install" with >= -j2 |
| * Added AC_SYS_LARGEFILE, needed for compiling on certain ARM procs |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 22 Mar 2020 07:45:19 +0100 |
| mtools (4.0.23) stable; urgency=low |
| * Address lots of compiler warnings (assignments between different types) |
| * Network speedup fixes for floppyd (TCP_CORK) |
| * Typo fixes |
| * Explicitly pass available target buffer size for character set conversions |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 9 Dec 2018 23:26:50 +0100 |
| mtools (4.0.22) stable; urgency=low |
| * Fixed -f flag for mformat (size is KBytes, rather than sectors) |
| * Fixed toupper/tolower usage (unsigned char rather than plain signed) |
| -- Alain Knaff <alain@knaff.lu> Sun, 2 Dec 2018 18:29:59 +0100 |
| |
| mtools (4.0.21) stable; urgency=low |
| * Fixed compilation for MingW |
| * After MingW compilation, make sure executable has .exe extension |
| * Addressed compiler warnings |
| * Fixed length handling in character set conversion (Unicode file names) |
| * Fixed matching of character range, when containing Unicode characters (mdir "c:test[α-ω].exe") |
| * Fixed initialization of my_scsi_cmd constructor |
| -- Alain Knaff <alain@knaff.lu> Sat, 24 Nov 2018 09:50:03 +0100 |
| |
| mtools (4.0.20) stable; urgency=low |
| * initialize directory entries to 0 |
| * bad message "Too few sectors" replaced with "Too many sectors" |
| * apostrophe in mlabel no longer causes generation of long entry |
| * option to fake system date for file creation using the SOURCE_DATE_EPOCH environment variables |
| * can now be compiled with "clang" compiler |
| * fallback function for strndup, for those platforms that don't have it |
| * fixed a number of -Wextra warnings |
| * new compressed archive formats for uz/lz |
| * allow to specify number of reserved sectors for FAT32. |
| * file/device locking with timeout (rather than immediate failure) |
| * fixed support for BPB-less legacy formats. |
| * removed check that disk must be an integer number of tracks. |
| * removed .eh/.oh macros from manual pages |
| -- Alain Knaff <alain@knaff.lu> Sun, 11 Nov 2018 14:56:06 +0100 |
| |
| mtools (4.0.19) stable; urgency=low |
| * Fix for short file names starting with character 0xE5 |
| (by remapping it to 0x5) |
| * mpartition: Partition types closer to what Microsoft uses |
| * mformat: figure out LBA geometry as last resort if geometry |
| * is neither specified in config and/or commandline, nor can be |
| * queried from the device |
| * mformat: use same default cluster size by size as Microsoft |
| for FAT32 |
| * additional sanity checks |
| * document how cluster size is picked in mformat.c man page |
| * document how partition types are picked in mpartition.c man page |
| -- Alain Knaff <alain@knaff.lu> Thu, 29 Sep 2018 12:00:00 +0200 |
| mtools (4.0.18) stable; urgency=low |
| * Fix for names of iconv encodings on AIX |
| * Fix mt_size_t on NetBSD |
| * Fixed compilation on Mingw |
| * Fixed doc (especially mformat) |
| * Fix mformat'ing of FAT12 filesystems with huge cluster sizes |
| * Minfo prints image file name in mformat command line if an image |
| * file name was given |
| * Always generate gzip-compressed RPMs, in order to remain |
| * compatible with older distributions |
| * Fixed buffer overflow with drive letter in mclasserase |
| -- Alain Knaff <alain@knaff.lu> Wed, 9 Jan 2013 00:21:20 +0200 |
| mtools (4.0.17) stable; urgency=low |
| |
| * mbadblocks now takes a list of bad blocks (either as sectors |
| or as clusters) |
| * mbadblocks now is able to do write scanning for bad blocks |
| * mshowfat can show cluster of specific offset |
| * Enable mtools to deal with very small sector sizes... |
| * Fixed encoding of all-lowercase names (no need to mangle |
| these) |
| * Consider every directory entry after an ENDMARK (0x00) to be deleted |
| * After writing a new entry at end of a directory, be sure to also add |
| an ENDMARK (0x00) |
| * Deal with possibility of a NULL pointer being returned by |
| localtime during timestamp conversion |
| -- Alain Knaff <alain@knaff.lu> Wed, 29 Jun 2011 00:21:20 +0200 |
| mtools (4.0.16) stable; urgency=low |
| |
| * configure.in fixes |
| * fixed formatting of fat_size_calculation.tex document |
| * compatibility with current autoconfig versions |
| * Make it clear that label is limited to 11 characters |
| * Fixed typo in initialization of FAT32 info sector |
| |
| -- Alain Knaff <alain@knaff.lu> Sat, 16 Apr 2011 18:00:30 +0200 |
| mtools (4.0.15) stable; urgency=low |
| |
| * Added missing -i option to mshortname |
| * Split .deb package into mtools and floppyd in order to |
| match Ubuntu |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 17 Oct 2010 19:42:46 +0200 |
| mtools (4.0.14) stable; urgency=low |
| |
| * New mshortname command |
| * Fix floppyd for disks bigger than 2 Gig |
| * Remove obsolete -z flag |
| * Remove now unsupported AC_USE_SYSTEM_EXTENSIONS |
| * Fixed output formatting of mdir if MTOOLS_DOTTED_DIR is set |
| * Mformat now correctly writes backup boot sector |
| * Fixed signedness of serial number in mlabel |
| * Fixed buffer size problem in mlabel |
| * Make mlabel write backup boot sector if FAT32 |
| * Catch situation where both clear and new label are given to mlabel |
| * Quote filename parameters to scripts |
| * Mformat: Close file descriptor for boot sector |
| * Added lzip support to scripts/uz |
| * Added Tot_sectors option to mformat |
| * Fixed hidden sector handling in mformat |
| * Minfo generates mformat command lines containing new -T option |
| * Mlabel prints error if label too long |
| |
| -- Alain Knaff <alain@knaff.lu> Tue, 12 Oct 2010 00:19:48 +0200 |
| mtools (4.0.13) stable; urgency=low |
| |
| * Merged Debian patches |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 28 Feb 2010 15:33:45 +0100 |
| mtools (4.0.12) stable; urgency=low |
| |
| * Mingw compatibility fixes |
| |
| -- Alain Knaff <alain@knaff.lu> Tue, 3 Nov 2009 21:26:58 +0100 |
| mtools (4.0.11) stable; urgency=low |
| |
| * Fixed compiler in mlabel.c and elsewhere |
| * Fixed h flag in mattrib.c |
| * Added missing error checking in floppyd and elsewhere |
| |
| -- Alain Knaff <alain@knaff.lu> Sat, 29 Aug 2009 14:38:19 +0200 |
| mtools (4.0.10) stable; urgency=low |
| |
| * More copyright stuff |
| * Fixed issues with max filesize (was 2GB instead of 4GB, and |
| warned only after copying the beginning) |
| |
| -- Alain Knaff <alain@knaff.lu> Tue, 3 Mar 2009 22:14:04 +0100 |
| mtools (4.0.9) stable; urgency=low |
| |
| * More copyright stuff |
| |
| -- Alain Knaff <alain@knaff.lu> Mon, 2 Mar 2009 22:15:54 +0100 |
| mtools (4.0.8) stable; urgency=low |
| |
| * Copyright notices |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 1 Mar 2009 00:36:22 +0100 |
| mtools (4.0.7) stable; urgency=low |
| |
| * Fixed conversion to native on OS/2 |
| * Fix parsing of --help flag |
| |
| -- Alain Knaff <alain@knaff.lu> Tue, 24 Feb 2009 19:55:46 +0100 |
| mtools (4.0.6) stable; urgency=low |
| |
| * Fallback for missing wchar_t iconv codepage on OS/2 |
| * Fixes for LSEEK64 support |
| * Support for --help that returns a 0 exit status |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 22 Feb 2009 02:04:32 +0100 |
| mtools (4.0.5) stable; urgency=low |
| |
| * Make setpgrp() usage in floppyd conditional |
| * Re-instate PACKED around structure (ARM) |
| * LSEEK64 |
| |
| -- Alain Knaff <alain@knaff.lu> Thu, 19 Feb 2009 23:55:04 +0100 |
| mtools (4.0.4) stable; urgency=low |
| |
| * BSD support: SCSI, use getuserid/getgroupid in floppyd |
| * Another attempt at putwc fix for OS/2 |
| * Further GNU fixes |
| * Fallback for putwc if there is wchar (OS/2) |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 15 Feb 2009 16:18:32 +0100 |
| mtools (4.0.3) stable; urgency=low |
| |
| * Fix multipart pathname parsing bug in vfat.c (forgot limited length) |
| * Supplied fallback define for putwc |
| * Copyright notices in all sources |
| |
| -- Alain Knaff <alain@knaff.lu> Mon, 9 Feb 2009 21:46:01 +0100 |
| mtools (4.0.2) stable; urgency=low |
| |
| * Fixed off-by-2 error in unix_name in file_name.c |
| |
| -- Alain Knaff <alain@knaff.lu> Mon, 26 Jan 2009 22:58:06 +0100 |
| mtools (4.0.1) stable; urgency=low |
| |
| * Missing functions on Solaris |
| |
| -- Alain Knaff <alain@knaff.lu> Sun, 7 Dec 2008 21:38:55 +0100 |
| mtools (4.0.0) stable; urgency=low |
| |
| * Offset for -i-specified image files |
| |
| -- Alain Knaff <alain@knaff.lu> Sat, 29 Nov 2008 09:20:30 +0100 |
| mtools (4.0.0-pre2) stable; urgency=low |
| |
| * Use transliteration to represent characters which don't exist in |
| target set |
| |
| -- Alain Knaff <alain@knaff.lu> Tue, 18 Nov 2008 22:42:23 +0100 |
| mtools (4.0.0-pre1) stable; urgency=low |
| |
| * Unicode support |
| |
| -- Alain Knaff <alain@knaff.lu> Sat, 1 Nov 2008 20:52:58 +0100 |
| mtools (3.9.11-20071226) stable; urgency=low |
| |
| * first release of debian package |
| |
| -- Alain Knaff <alain@knaff.lu> Tue, 28 Aug 2007 23:23:37 +0100 |
