| /* Microsoft Reference Implementation for TPM 2.0 | |
| * | |
| * The copyright in this software is being made available under the BSD License, | |
| * included below. This software may be subject to other third party and | |
| * contributor rights, including patent rights, and no such rights are granted | |
| * under this license. | |
| * | |
| * Copyright (c) Microsoft Corporation | |
| * | |
| * All rights reserved. | |
| * | |
| * BSD License | |
| * | |
| * Redistribution and use in source and binary forms, with or without modification, | |
| * are permitted provided that the following conditions are met: | |
| * | |
| * Redistributions of source code must retain the above copyright notice, this list | |
| * of conditions and the following disclaimer. | |
| * | |
| * Redistributions in binary form must reproduce the above copyright notice, this | |
| * list of conditions and the following disclaimer in the documentation and/or other | |
| * materials provided with the distribution. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ""AS IS"" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| //** Includes, Defines, and Types | |
| #define TPM_FAIL_C | |
| #include "Tpm.h" | |
| #include <assert.h> | |
| // On MS C compiler, can save the alignment state and set the alignment to 1 for | |
| // the duration of the TpmTypes.h include. This will avoid a lot of alignment | |
| // warnings from the compiler for the unaligned structures. The alignment of the | |
| // structures is not important as this function does not use any of the structures | |
| // in TpmTypes.h and only include it for the #defines of the capabilities, | |
| // properties, and command code values. | |
| #include "TpmTypes.h" | |
| //** Typedefs | |
| // These defines are used primarily for sizing of the local response buffer. | |
| typedef struct | |
| { | |
| TPM_ST tag; | |
| UINT32 size; | |
| TPM_RC code; | |
| } HEADER; | |
| typedef struct | |
| { | |
| BYTE tag[sizeof(TPM_ST)]; | |
| BYTE size[sizeof(UINT32)]; | |
| BYTE code[sizeof(TPM_RC)]; | |
| } PACKED_HEADER; | |
| typedef struct | |
| { | |
| BYTE size[sizeof(UINT16)]; | |
| struct | |
| { | |
| BYTE function[sizeof(UINT32)]; | |
| BYTE line[sizeof(UINT32)]; | |
| BYTE code[sizeof(UINT32)]; | |
| } values; | |
| BYTE returnCode[sizeof(TPM_RC)]; | |
| } GET_TEST_RESULT_PARAMETERS; | |
| typedef struct | |
| { | |
| BYTE moreData[sizeof(TPMI_YES_NO)]; | |
| BYTE capability[sizeof(TPM_CAP)]; // Always TPM_CAP_TPM_PROPERTIES | |
| BYTE tpmProperty[sizeof(TPML_TAGGED_TPM_PROPERTY)]; | |
| } GET_CAPABILITY_PARAMETERS; | |
| typedef struct | |
| { | |
| BYTE header[sizeof(PACKED_HEADER)]; | |
| BYTE getTestResult[sizeof(GET_TEST_RESULT_PARAMETERS)]; | |
| } TEST_RESPONSE; | |
| typedef struct | |
| { | |
| BYTE header[sizeof(PACKED_HEADER)]; | |
| BYTE getCap[sizeof(GET_CAPABILITY_PARAMETERS)]; | |
| } CAPABILITY_RESPONSE; | |
| typedef union | |
| { | |
| BYTE test[sizeof(TEST_RESPONSE)]; | |
| BYTE cap[sizeof(CAPABILITY_RESPONSE)]; | |
| } RESPONSES; | |
| // Buffer to hold the responses. This may be a little larger than | |
| // required due to padding that a compiler might add. | |
| // Note: This is not in Global.c because of the specialized data definitions above. | |
| // Since the data contained in this structure is not relevant outside of the | |
| // execution of a single command (when the TPM is in failure mode. There is no | |
| // compelling reason to move all the typedefs to Global.h and this structure | |
| // to Global.c. | |
| #ifndef __IGNORE_STATE__ // Don't define this value | |
| static BYTE response[sizeof(RESPONSES)]; | |
| #endif | |
| //** Local Functions | |
| //*** MarshalUint16() | |
| // Function to marshal a 16 bit value to the output buffer. | |
| static INT32 | |
| MarshalUint16( | |
| UINT16 integer, | |
| BYTE **buffer | |
| ) | |
| { | |
| return UINT16_Marshal(&integer, buffer, NULL); | |
| } | |
| //*** MarshalUint32() | |
| // Function to marshal a 32 bit value to the output buffer. | |
| static INT32 | |
| MarshalUint32( | |
| UINT32 integer, | |
| BYTE **buffer | |
| ) | |
| { | |
| return UINT32_Marshal(&integer, buffer, NULL); | |
| } | |
| //*** UnmarshalHeader() | |
| // function to unmarshal the 10-byte command header. | |
| static BOOL | |
| UnmarshalHeader( | |
| HEADER *header, | |
| BYTE **buffer, | |
| INT32 *size | |
| ) | |
| { | |
| UINT32 usize; | |
| TPM_RC ucode; | |
| if(UINT16_Unmarshal(&header->tag, buffer, size) != TPM_RC_SUCCESS | |
| || UINT32_Unmarshal(&usize, buffer, size) != TPM_RC_SUCCESS | |
| || UINT32_Unmarshal(&ucode, buffer, size) != TPM_RC_SUCCESS) | |
| return FALSE; | |
| header->size = usize; | |
| header->code = ucode; | |
| return TRUE; | |
| } | |
| //** Public Functions | |
| #ifdef SIMULATION | |
| //*** SetForceFailureMode() | |
| // This function is called by the simulator to enable failure mode testing. | |
| LIB_EXPORT void | |
| SetForceFailureMode( | |
| void | |
| ) | |
| { | |
| g_forceFailureMode = TRUE; | |
| return; | |
| } | |
| #endif | |
| //*** TpmFail() | |
| // This function is called by TPM.lib when a failure occurs. It will set up the | |
| // failure values to be returned on TPM2_GetTestResult(). | |
| NORETURN void | |
| TpmFail( | |
| #ifndef NO_FAIL_TRACE | |
| const char *function, | |
| int line, | |
| #endif | |
| int code | |
| ) | |
| { | |
| // Save the values that indicate where the error occurred. | |
| // On a 64-bit machine, this may truncate the address of the string | |
| // of the function name where the error occurred. | |
| #ifndef NO_FAIL_TRACE | |
| s_failFunction = (UINT32)function; | |
| s_failLine = line; | |
| #else | |
| s_failFunction = (UINT32)NULL; | |
| s_failLine = 0; | |
| #endif | |
| s_failCode = code; | |
| // We are in failure mode | |
| g_inFailureMode = TRUE; | |
| // if asserts are enabled, then do an assert unless the failure mode code | |
| // is being tested. | |
| #ifdef SIMULATION | |
| # ifndef NDEBUG | |
| assert(g_forceFailureMode); | |
| # endif | |
| // Clear this flag | |
| g_forceFailureMode = FALSE; | |
| #endif | |
| // Jump to the failure mode code. | |
| // Note: only get here if asserts are off or if we are testing failure mode | |
| _plat__Fail(); | |
| } | |
| //*** TpmFailureMode( | |
| // This function is called by the interface code when the platform is in failure | |
| // mode. | |
| void | |
| TpmFailureMode( | |
| unsigned int inRequestSize, // IN: command buffer size | |
| unsigned char *inRequest, // IN: command buffer | |
| unsigned int *outResponseSize, // OUT: response buffer size | |
| unsigned char **outResponse // OUT: response buffer | |
| ) | |
| { | |
| BYTE *buffer; | |
| UINT32 marshalSize; | |
| UINT32 capability; | |
| HEADER header; // unmarshaled command header | |
| UINT32 pt; // unmarshaled property type | |
| UINT32 count; // unmarshaled property count | |
| // If there is no command buffer, then just return TPM_RC_FAILURE | |
| if(inRequestSize == 0 || inRequest == NULL) | |
| goto FailureModeReturn; | |
| // If the header is not correct for TPM2_GetCapability() or | |
| // TPM2_GetTestResult() then just return the in failure mode response; | |
| buffer = inRequest; | |
| if(!UnmarshalHeader(&header, &inRequest, (INT32 *)&inRequestSize)) | |
| goto FailureModeReturn; | |
| if(header.tag != TPM_ST_NO_SESSIONS | |
| || header.size < 10) | |
| goto FailureModeReturn; | |
| switch(header.code) | |
| { | |
| case TPM_CC_GetTestResult: | |
| // make sure that the command size is correct | |
| if(header.size != 10) | |
| goto FailureModeReturn; | |
| buffer = &response[10]; | |
| marshalSize = MarshalUint16(3 * sizeof(UINT32), &buffer); | |
| marshalSize += MarshalUint32(s_failFunction, &buffer); | |
| marshalSize += MarshalUint32(s_failLine, &buffer); | |
| marshalSize += MarshalUint32(s_failCode, &buffer); | |
| if(s_failCode == FATAL_ERROR_NV_UNRECOVERABLE) | |
| marshalSize += MarshalUint32(TPM_RC_NV_UNINITIALIZED, &buffer); | |
| else | |
| marshalSize += MarshalUint32(TPM_RC_FAILURE, &buffer); | |
| break; | |
| case TPM_CC_GetCapability: | |
| // make sure that the size of the command is exactly the size | |
| // returned for the capability, property, and count | |
| if(header.size != (10 + (3 * sizeof(UINT32))) | |
| // also verify that this is requesting TPM properties | |
| || TPM_RC_SUCCESS != UINT32_Unmarshal(&capability, &inRequest, | |
| (INT32 *)&inRequestSize) | |
| || capability != TPM_CAP_TPM_PROPERTIES | |
| || TPM_RC_SUCCESS != UINT32_Unmarshal(&pt, &inRequest, | |
| (INT32 *)&inRequestSize) | |
| || TPM_RC_SUCCESS != UINT32_Unmarshal(&count, &inRequest, | |
| (INT32 *)&inRequestSize)) | |
| goto FailureModeReturn; | |
| // If in failure mode because of an unrecoverable read error, and the | |
| // property is 0 and the count is 0, then this is an indication to | |
| // re-manufacture the TPM. Do the re-manufacture but stay in failure | |
| // mode until the TPM is reset. | |
| // Note: this behavior is not required by the specification and it is | |
| // OK to leave the TPM permanently bricked due to an unrecoverable NV | |
| // error. | |
| if(count == 0 && pt == 0 && s_failCode == FATAL_ERROR_NV_UNRECOVERABLE) | |
| { | |
| g_manufactured = FALSE; | |
| TPM_Manufacture(0); | |
| } | |
| if(count > 0) | |
| count = 1; | |
| else if(pt > TPM_PT_FIRMWARE_VERSION_2) | |
| count = 0; | |
| if(pt < TPM_PT_MANUFACTURER) | |
| pt = TPM_PT_MANUFACTURER; | |
| // set up for return | |
| buffer = &response[10]; | |
| // if the request was for a PT less than the last one | |
| // then we indicate more, otherwise, not. | |
| if(pt < TPM_PT_FIRMWARE_VERSION_2) | |
| *buffer++ = YES; | |
| else | |
| *buffer++ = NO; | |
| marshalSize = 1; | |
| // indicate the capability type | |
| marshalSize += MarshalUint32(capability, &buffer); | |
| // indicate the number of values that are being returned (0 or 1) | |
| marshalSize += MarshalUint32(count, &buffer); | |
| // indicate the property | |
| marshalSize += MarshalUint32(pt, &buffer); | |
| if(count > 0) | |
| switch(pt) | |
| { | |
| case TPM_PT_MANUFACTURER: | |
| // the vendor ID unique to each TPM manufacturer | |
| #ifdef MANUFACTURER | |
| pt = *(UINT32*)MANUFACTURER; | |
| #else | |
| pt = 0; | |
| #endif | |
| break; | |
| case TPM_PT_VENDOR_STRING_1: | |
| // the first four characters of the vendor ID string | |
| #ifdef VENDOR_STRING_1 | |
| pt = *(UINT32*)VENDOR_STRING_1; | |
| #else | |
| pt = 0; | |
| #endif | |
| break; | |
| case TPM_PT_VENDOR_STRING_2: | |
| // the second four characters of the vendor ID string | |
| #ifdef VENDOR_STRING_2 | |
| pt = *(UINT32*)VENDOR_STRING_2; | |
| #else | |
| pt = 0; | |
| #endif | |
| break; | |
| case TPM_PT_VENDOR_STRING_3: | |
| // the third four characters of the vendor ID string | |
| #ifdef VENDOR_STRING_3 | |
| pt = *(UINT32*)VENDOR_STRING_3; | |
| #else | |
| pt = 0; | |
| #endif | |
| break; | |
| case TPM_PT_VENDOR_STRING_4: | |
| // the fourth four characters of the vendor ID string | |
| #ifdef VENDOR_STRING_4 | |
| pt = *(UINT32*)VENDOR_STRING_4; | |
| #else | |
| pt = 0; | |
| #endif | |
| break; | |
| case TPM_PT_VENDOR_TPM_TYPE: | |
| // vendor-defined value indicating the TPM model | |
| // We just make up a number here | |
| pt = 1; | |
| break; | |
| case TPM_PT_FIRMWARE_VERSION_1: | |
| // the more significant 32-bits of a vendor-specific value | |
| // indicating the version of the firmware | |
| #ifdef FIRMWARE_V1 | |
| pt = FIRMWARE_V1; | |
| #else | |
| pt = 0; | |
| #endif | |
| break; | |
| default: // TPM_PT_FIRMWARE_VERSION_2: | |
| // the less significant 32-bits of a vendor-specific value | |
| // indicating the version of the firmware | |
| #ifdef FIRMWARE_V2 | |
| pt = FIRMWARE_V2; | |
| #else | |
| pt = 0; | |
| #endif | |
| break; | |
| } | |
| marshalSize += MarshalUint32(pt, &buffer); | |
| break; | |
| default: // default for switch (cc) | |
| goto FailureModeReturn; | |
| } | |
| // Now do the header | |
| buffer = response; | |
| marshalSize = marshalSize + 10; // Add the header size to the | |
| // stuff already marshaled | |
| MarshalUint16(TPM_ST_NO_SESSIONS, &buffer); // structure tag | |
| MarshalUint32(marshalSize, &buffer); // responseSize | |
| MarshalUint32(TPM_RC_SUCCESS, &buffer); // response code | |
| *outResponseSize = marshalSize; | |
| *outResponse = (unsigned char *)&response; | |
| return; | |
| FailureModeReturn: | |
| buffer = response; | |
| marshalSize = MarshalUint16(TPM_ST_NO_SESSIONS, &buffer); | |
| marshalSize += MarshalUint32(10, &buffer); | |
| marshalSize += MarshalUint32(TPM_RC_FAILURE, &buffer); | |
| *outResponseSize = marshalSize; | |
| *outResponse = (unsigned char *)response; | |
| return; | |
| } | |
| //*** UnmarshalFail() | |
| // This is a stub that is used to catch an attempt to unmarshal an entry | |
| // that is not defined. Don't ever expect this to be called but... | |
| void | |
| UnmarshalFail( | |
| void *type, | |
| BYTE **buffer, | |
| INT32 *size | |
| ) | |
| { | |
| NOT_REFERENCED(type); | |
| NOT_REFERENCED(buffer); | |
| NOT_REFERENCED(size); | |
| FAIL(FATAL_ERROR_INTERNAL); | |
| } |