| /* Microsoft Reference Implementation for TPM 2.0 | |
| * | |
| * The copyright in this software is being made available under the BSD License, | |
| * included below. This software may be subject to other third party and | |
| * contributor rights, including patent rights, and no such rights are granted | |
| * under this license. | |
| * | |
| * Copyright (c) Microsoft Corporation | |
| * | |
| * All rights reserved. | |
| * | |
| * BSD License | |
| * | |
| * Redistribution and use in source and binary forms, with or without modification, | |
| * are permitted provided that the following conditions are met: | |
| * | |
| * Redistributions of source code must retain the above copyright notice, this list | |
| * of conditions and the following disclaimer. | |
| * | |
| * Redistributions in binary form must reproduce the above copyright notice, this | |
| * list of conditions and the following disclaimer in the documentation and/or other | |
| * materials provided with the distribution. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ""AS IS"" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| //** Introduction | |
| // This file contains the code to perform the various self-test functions. | |
| //** Includes and Defines | |
| #include "Tpm.h" | |
| #define SELF_TEST_DATA | |
| #ifdef SELF_TEST | |
| // These includes pull in the data structures. They contain data definitions for the | |
| // various tests. | |
| #include "SelfTest.h" | |
| #include "SymmetricTest.h" | |
| #include "RsaTestData.h" | |
| #include "EccTestData.h" | |
| #include "HashTestData.h" | |
| #define TEST_DEFAULT_TEST_HASH(vector) \ | |
| if(TEST_BIT(DEFAULT_TEST_HASH, g_toTest)) \ | |
| TestHash(DEFAULT_TEST_HASH, vector); | |
| // Make sure that the algorithm has been tested | |
| #define CLEAR_BOTH(alg) { CLEAR_BIT(alg, *toTest); \ | |
| if(toTest != &g_toTest) \ | |
| CLEAR_BIT(alg, g_toTest); } | |
| #define SET_BOTH(alg) { SET_BIT(alg, *toTest); \ | |
| if(toTest != &g_toTest) \ | |
| SET_BIT(alg, g_toTest); } | |
| #define TEST_BOTH(alg) ((toTest != &g_toTest) \ | |
| ? TEST_BIT(alg, *toTest) || TEST_BIT(alg, g_toTest) \ | |
| : TEST_BIT(alg, *toTest)) | |
| // Can only cancel if doing a list. | |
| #define CHECK_CANCELED \ | |
| if(_plat__IsCanceled() && toTest != &g_toTest) \ | |
| return TPM_RC_CANCELED; | |
| //** Hash Tests | |
| //*** Description | |
| // The hash test does a known-value HMAC using the specified hash algorithm. | |
| //*** TestHash() | |
| // The hash test function. | |
| static TPM_RC | |
| TestHash( | |
| TPM_ALG_ID hashAlg, | |
| ALGORITHM_VECTOR *toTest | |
| ) | |
| { | |
| TPM2B_DIGEST computed; // value computed | |
| UINT16 digestSize; | |
| const TPM2B *testDigest = NULL; | |
| HMAC_STATE state; | |
| // TPM2B_TYPE(HMAC_BLOCK, DEFAULT_TEST_HASH_BLOCK_SIZE); | |
| pAssert(hashAlg != TPM_ALG_NULL); | |
| switch(hashAlg) | |
| { | |
| #if ALG_SHA1 | |
| case ALG_SHA1_VALUE: | |
| testDigest = &c_SHA1_digest.b; | |
| break; | |
| #endif | |
| #if ALG_SHA256 | |
| case ALG_SHA256_VALUE: | |
| testDigest = &c_SHA256_digest.b; | |
| break; | |
| #endif | |
| #if ALG_SHA384 | |
| case ALG_SHA384_VALUE: | |
| testDigest = &c_SHA384_digest.b; | |
| break; | |
| #endif | |
| #if ALG_SHA512 | |
| case ALG_SHA512_VALUE: | |
| testDigest = &c_SHA512_digest.b; | |
| break; | |
| #endif | |
| #if ALG_SM3_256 | |
| case ALG_SM3_256_VALUE: | |
| testDigest = &c_SM3_256_digest.b; | |
| break; | |
| #endif | |
| default: | |
| FAIL(FATAL_ERROR_INTERNAL); | |
| } | |
| // Clear the to-test bits | |
| CLEAR_BOTH(hashAlg); | |
| // Set the HMAC key to twice the digest size | |
| digestSize = CryptHashGetDigestSize(hashAlg); | |
| CryptHmacStart(&state, hashAlg, digestSize * 2, | |
| (BYTE *)c_hashTestKey.t.buffer); | |
| CryptDigestUpdate(&state.hashState, 2 * CryptHashGetBlockSize(hashAlg), | |
| (BYTE *)c_hashTestData.t.buffer); | |
| computed.t.size = digestSize; | |
| CryptHmacEnd(&state, digestSize, computed.t.buffer); | |
| if((testDigest->size != computed.t.size) | |
| || (memcmp(testDigest->buffer, computed.t.buffer, computed.b.size) != 0)) | |
| SELF_TEST_FAILURE; | |
| return TPM_RC_SUCCESS; | |
| } | |
| //** Symmetric Test Functions | |
| //*** MakeIv() | |
| // Internal function to make the appropriate IV depending on the mode. | |
| static UINT32 | |
| MakeIv( | |
| TPM_ALG_ID mode, // IN: symmetric mode | |
| UINT32 size, // IN: block size of the algorithm | |
| BYTE *iv // OUT: IV to fill in | |
| ) | |
| { | |
| BYTE i; | |
| if(mode == ALG_ECB_VALUE) | |
| return 0; | |
| if(mode == ALG_CTR_VALUE) | |
| { | |
| // The test uses an IV that has 0xff in the last byte | |
| for(i = 1; i <= size; i++) | |
| *iv++ = 0xff - (BYTE)(size - i); | |
| } | |
| else | |
| { | |
| for(i = 0; i < size; i++) | |
| *iv++ = i; | |
| } | |
| return size; | |
| } | |
| //*** TestSymmetricAlgorithm() | |
| // Function to test a specific algorithm, key size, and mode. | |
| static void | |
| TestSymmetricAlgorithm( | |
| const SYMMETRIC_TEST_VECTOR *test, // | |
| TPM_ALG_ID mode // | |
| ) | |
| { | |
| BYTE encrypted[MAX_SYM_BLOCK_SIZE * 2]; | |
| BYTE decrypted[MAX_SYM_BLOCK_SIZE * 2]; | |
| TPM2B_IV iv; | |
| // | |
| // Get the appropriate IV | |
| iv.t.size = (UINT16)MakeIv(mode, test->ivSize, iv.t.buffer); | |
| // Encrypt known data | |
| CryptSymmetricEncrypt(encrypted, test->alg, test->keyBits, test->key, &iv, | |
| mode, test->dataInOutSize, test->dataIn); | |
| // Check that it matches the expected value | |
| if(!MemoryEqual(encrypted, test->dataOut[mode - ALG_CTR_VALUE], | |
| test->dataInOutSize)) | |
| SELF_TEST_FAILURE; | |
| // Reinitialize the iv for decryption | |
| MakeIv(mode, test->ivSize, iv.t.buffer); | |
| CryptSymmetricDecrypt(decrypted, test->alg, test->keyBits, test->key, &iv, | |
| mode, test->dataInOutSize, | |
| test->dataOut[mode - ALG_CTR_VALUE]); | |
| // Make sure that it matches what we started with | |
| if(!MemoryEqual(decrypted, test->dataIn, test->dataInOutSize)) | |
| SELF_TEST_FAILURE; | |
| } | |
| //*** AllSymsAreDone() | |
| // Checks if both symmetric algorithms have been tested. This is put here | |
| // so that addition of a symmetric algorithm will be relatively easy to handle | |
| static BOOL | |
| AllSymsAreDone( | |
| ALGORITHM_VECTOR *toTest | |
| ) | |
| { | |
| return (!TEST_BOTH(ALG_AES_VALUE) && !TEST_BOTH(ALG_SM4_VALUE)); | |
| } | |
| //*** AllModesAreDone() | |
| // Checks if all the modes have been tested | |
| static BOOL | |
| AllModesAreDone( | |
| ALGORITHM_VECTOR *toTest | |
| ) | |
| { | |
| TPM_ALG_ID alg; | |
| for(alg = TPM_SYM_MODE_FIRST; alg <= TPM_SYM_MODE_LAST; alg++) | |
| if(TEST_BOTH(alg)) | |
| return FALSE; | |
| return TRUE; | |
| } | |
| //*** TestSymmetric() | |
| // If 'alg' is a symmetric block cipher, then all of the modes that are selected are | |
| // tested. If 'alg' is a mode, then all algorithms of that mode are tested. | |
| static TPM_RC | |
| TestSymmetric( | |
| TPM_ALG_ID alg, | |
| ALGORITHM_VECTOR *toTest | |
| ) | |
| { | |
| SYM_INDEX index; | |
| TPM_ALG_ID mode; | |
| // | |
| if(!TEST_BIT(alg, *toTest)) | |
| return TPM_RC_SUCCESS; | |
| if(alg == ALG_AES_VALUE || alg == ALG_SM4_VALUE || alg == ALG_CAMELLIA_VALUE) | |
| { | |
| // Will test the algorithm for all modes and key sizes | |
| CLEAR_BOTH(alg); | |
| // A test this algorithm for all modes | |
| for(index = 0; index < NUM_SYMS; index++) | |
| { | |
| if(c_symTestValues[index].alg == alg) | |
| { | |
| for(mode = TPM_SYM_MODE_FIRST; | |
| mode <= TPM_SYM_MODE_LAST; | |
| mode++) | |
| { | |
| if(TEST_BIT(mode, *toTest)) | |
| TestSymmetricAlgorithm(&c_symTestValues[index], mode); | |
| } | |
| } | |
| } | |
| // if all the symmetric tests are done | |
| if(AllSymsAreDone(toTest)) | |
| { | |
| // all symmetric algorithms tested so no modes should be set | |
| for(alg = TPM_SYM_MODE_FIRST; alg <= TPM_SYM_MODE_LAST; alg++) | |
| CLEAR_BOTH(alg); | |
| } | |
| } | |
| else if(TPM_SYM_MODE_FIRST <= alg && alg <= TPM_SYM_MODE_LAST) | |
| { | |
| // Test this mode for all key sizes and algorithms | |
| for(index = 0; index < NUM_SYMS; index++) | |
| { | |
| // The mode testing only comes into play when doing self tests | |
| // by command. When doing self tests by command, the block ciphers are | |
| // tested first. That means that all of their modes would have been | |
| // tested for all key sizes. If there is no block cipher left to | |
| // test, then clear this mode bit. | |
| if(!TEST_BIT(ALG_AES_VALUE, *toTest) | |
| && !TEST_BIT(ALG_SM4_VALUE, *toTest)) | |
| { | |
| CLEAR_BOTH(alg); | |
| } | |
| else | |
| { | |
| for(index = 0; index < NUM_SYMS; index++) | |
| { | |
| if(TEST_BIT(c_symTestValues[index].alg, *toTest)) | |
| TestSymmetricAlgorithm(&c_symTestValues[index], alg); | |
| } | |
| // have tested this mode for all algorithms | |
| CLEAR_BOTH(alg); | |
| } | |
| } | |
| if(AllModesAreDone(toTest)) | |
| { | |
| CLEAR_BOTH(ALG_AES_VALUE); | |
| CLEAR_BOTH(ALG_SM4_VALUE); | |
| } | |
| } | |
| else | |
| pAssert(alg == 0 && alg != 0); | |
| return TPM_RC_SUCCESS; | |
| } | |
| //** RSA Tests | |
| #ifdef TPM_ALG_RSA | |
| //*** Introduction | |
| // The tests are for public key only operations and for private key operations. | |
| // Signature verification and encryption are public key operations. They are tested | |
| // by using a KVT. For signature verification, this means that a known good | |
| // signature is checked by CryptRsaValidateSignature(). If it fails, then the | |
| // TPM enters failure mode. For encryption, the TPM encrypts known values using | |
| // the selected scheme and checks that the returned value matches the expected | |
| // value. | |
| // | |
| // For private key operations, a full scheme check is used. For a signing key, a | |
| // known key is used to sign a known message. Then that signature is verified. | |
| // since the signature may involve use of random values, the signature will be | |
| // different each time and we can't always check that the signature matches a | |
| // known value. The same technique is used for decryption (RSADP/RSAEP). | |
| // | |
| // When an operation uses the public key and the verification has not been | |
| // tested, the TPM will do a KVT. | |
| // | |
| // The test for the signing algorithm is built into the call for the algorithm | |
| //*** RsaKeyInitialize() | |
| // The test key is defined by a public modulus and a private prime. The TPM's RSA | |
| // code computes the second prime and the private exponent. | |
| static void | |
| RsaKeyInitialize( | |
| OBJECT *testObject | |
| ) | |
| { | |
| MemoryCopy2B(&testObject->publicArea.unique.rsa.b, (P2B)&c_rsaPublicModulus, | |
| sizeof(c_rsaPublicModulus)); | |
| MemoryCopy2B(&testObject->sensitive.sensitive.rsa.b, (P2B)&c_rsaPrivatePrime, | |
| sizeof(testObject->sensitive.sensitive.rsa.t.buffer)); | |
| testObject->publicArea.parameters.rsaDetail.keyBits = RSA_TEST_KEY_SIZE * 8; | |
| // Use the default exponent | |
| testObject->publicArea.parameters.rsaDetail.exponent = 0; | |
| testObject->attributes.privateExp = 0; | |
| } | |
| //*** TestRsaEncryptDecrypt() | |
| // These test are for an public key encryption that uses a random value | |
| static TPM_RC | |
| TestRsaEncryptDecrypt( | |
| TPM_ALG_ID scheme, // IN: the scheme | |
| ALGORITHM_VECTOR *toTest // | |
| ) | |
| { | |
| TPM2B_PUBLIC_KEY_RSA testInput; | |
| TPM2B_PUBLIC_KEY_RSA testOutput; | |
| const TPM2B_RSA_TEST_KEY *kvtValue = &c_RsaesKvt; | |
| TPM_RC result = TPM_RC_SUCCESS; | |
| const TPM2B *testLabel = NULL; | |
| OBJECT testObject; | |
| TPMT_RSA_DECRYPT rsaScheme; | |
| // | |
| // Don't need to initialize much of the test object but do need to initialize | |
| // the flag indicating that the private exponent has been computed. | |
| testObject.attributes.privateExp = CLEAR; | |
| RsaKeyInitialize(&testObject); | |
| rsaScheme.scheme = scheme; | |
| rsaScheme.details.anySig.hashAlg = DEFAULT_TEST_HASH; | |
| CLEAR_BOTH(scheme); | |
| CLEAR_BOTH(ALG_NULL_VALUE); | |
| if(scheme == TPM_ALG_NULL) | |
| { | |
| // This is an encryption scheme using the private key without any encoding. | |
| memcpy(testInput.t.buffer, c_RsaTestValue, sizeof(c_RsaTestValue)); | |
| testInput.t.size = sizeof(c_RsaTestValue); | |
| if(TPM_RC_SUCCESS != CryptRsaEncrypt(&testOutput, &testInput.b, | |
| &testObject, &rsaScheme, NULL, NULL)) | |
| SELF_TEST_FAILURE; | |
| if(!MemoryEqual(testOutput.t.buffer, c_RsaepKvt.buffer, c_RsaepKvt.size)) | |
| SELF_TEST_FAILURE; | |
| MemoryCopy2B(&testInput.b, &testOutput.b, sizeof(testInput.t.buffer)); | |
| if(TPM_RC_SUCCESS != CryptRsaDecrypt(&testOutput.b, &testInput.b, | |
| &testObject, &rsaScheme, NULL)) | |
| SELF_TEST_FAILURE; | |
| if(!MemoryEqual(testOutput.t.buffer, c_RsaTestValue, | |
| sizeof(c_RsaTestValue))) | |
| SELF_TEST_FAILURE; | |
| } | |
| else | |
| { | |
| // ALG_RSAES_VALUE: | |
| // This is an decryption scheme using padding according to | |
| // PKCS#1v2.1, 7.2. This padding uses random bits. To test a public | |
| // key encryption that uses random data, encrypt a value and then | |
| // decrypt the value and see that we get the encrypted data back. | |
| // The hash is not used by this encryption so it can be TMP_ALG_NULL | |
| // ALG_OAEP_VALUE: | |
| // This is also an decryption scheme and it also uses a | |
| // pseudo-random | |
| // value. However, this also uses a hash algorithm. So, we may need | |
| // to test that algorithm before use. | |
| if(scheme == ALG_OAEP_VALUE) | |
| { | |
| TEST_DEFAULT_TEST_HASH(toTest); | |
| kvtValue = &c_OaepKvt; | |
| testLabel = OAEP_TEST_STRING; | |
| } | |
| else if(scheme == ALG_RSAES_VALUE) | |
| { | |
| kvtValue = &c_RsaesKvt; | |
| testLabel = NULL; | |
| } | |
| else | |
| SELF_TEST_FAILURE; | |
| // Only use a digest-size portion of the test value | |
| memcpy(testInput.t.buffer, c_RsaTestValue, DEFAULT_TEST_DIGEST_SIZE); | |
| testInput.t.size = DEFAULT_TEST_DIGEST_SIZE; | |
| // See if the encryption works | |
| if(TPM_RC_SUCCESS != CryptRsaEncrypt(&testOutput, &testInput.b, | |
| &testObject, &rsaScheme, testLabel, | |
| NULL)) | |
| SELF_TEST_FAILURE; | |
| MemoryCopy2B(&testInput.b, &testOutput.b, sizeof(testInput.t.buffer)); | |
| // see if we can decrypt this value and get the original data back | |
| if(TPM_RC_SUCCESS != CryptRsaDecrypt(&testOutput.b, &testInput.b, | |
| &testObject, &rsaScheme, testLabel)) | |
| SELF_TEST_FAILURE; | |
| // See if the results compare | |
| if(testOutput.t.size != DEFAULT_TEST_DIGEST_SIZE | |
| || !MemoryEqual(testOutput.t.buffer, c_RsaTestValue, | |
| DEFAULT_TEST_DIGEST_SIZE)) | |
| SELF_TEST_FAILURE; | |
| // Now check that the decryption works on a known value | |
| MemoryCopy2B(&testInput.b, (P2B)kvtValue, | |
| sizeof(testInput.t.buffer)); | |
| if(TPM_RC_SUCCESS != CryptRsaDecrypt(&testOutput.b, &testInput.b, | |
| &testObject, &rsaScheme, testLabel)) | |
| SELF_TEST_FAILURE; | |
| if(testOutput.t.size != DEFAULT_TEST_DIGEST_SIZE | |
| || !MemoryEqual(testOutput.t.buffer, c_RsaTestValue, | |
| DEFAULT_TEST_DIGEST_SIZE)) | |
| SELF_TEST_FAILURE; | |
| } | |
| return result; | |
| } | |
| //*** TestRsaSignAndVerify() | |
| // This function does the testing of the RSA sign and verification functions. This | |
| // test does a KVT. | |
| static TPM_RC | |
| TestRsaSignAndVerify( | |
| TPM_ALG_ID scheme, | |
| ALGORITHM_VECTOR *toTest | |
| ) | |
| { | |
| TPM_RC result = TPM_RC_SUCCESS; | |
| OBJECT testObject; | |
| TPM2B_DIGEST testDigest; | |
| TPMT_SIGNATURE testSig; | |
| // Do a sign and signature verification. | |
| // RSASSA: | |
| // This is a signing scheme according to PKCS#1-v2.1 8.2. It does not | |
| // use random data so there is a KVT for the signing operation. On | |
| // first use of the scheme for signing, use the TPM's RSA key to | |
| // sign a portion of c_RsaTestData and compare the results to c_RsassaKvt. Then | |
| // decrypt the data to see that it matches the starting value. This verifies | |
| // the signature with a KVT | |
| // Clear the bits indicating that the function has not been checked. This is to | |
| // prevent looping | |
| CLEAR_BOTH(scheme); | |
| CLEAR_BOTH(ALG_NULL_VALUE); | |
| CLEAR_BOTH(ALG_RSA_VALUE); | |
| RsaKeyInitialize(&testObject); | |
| memcpy(testDigest.t.buffer, (BYTE *)c_RsaTestValue, DEFAULT_TEST_DIGEST_SIZE); | |
| testDigest.t.size = DEFAULT_TEST_DIGEST_SIZE; | |
| testSig.sigAlg = scheme; | |
| testSig.signature.rsapss.hash = DEFAULT_TEST_HASH; | |
| // RSAPSS: | |
| // This is a signing scheme a according to PKCS#1-v2.2 8.1 it uses | |
| // random data in the signature so there is no KVT for the signing | |
| // operation. To test signing, the TPM will use the TPM's RSA key | |
| // to sign a portion of c_RsaTestValue and then it will verify the | |
| // signature. For verification, c_RsapssKvt is verified before the | |
| // user signature blob is verified. The worst case for testing of this | |
| // algorithm is two private and one public key operation. | |
| // The process is to sign known data. If RSASSA is being done, verify that the | |
| // signature matches the precomputed value. For both, use the signed value and | |
| // see that the verification says that it is a good signature. Then | |
| // if testing RSAPSS, do a verify of a known good signature. This ensures that | |
| // the validation function works. | |
| if(TPM_RC_SUCCESS != CryptRsaSign(&testSig, &testObject, &testDigest, NULL)) | |
| SELF_TEST_FAILURE; | |
| // For RSASSA, make sure the results is what we are looking for | |
| if(testSig.sigAlg == ALG_RSASSA_VALUE) | |
| { | |
| if(testSig.signature.rsassa.sig.t.size != RSA_TEST_KEY_SIZE | |
| || !MemoryEqual(c_RsassaKvt.buffer, | |
| testSig.signature.rsassa.sig.t.buffer, | |
| RSA_TEST_KEY_SIZE)) | |
| SELF_TEST_FAILURE; | |
| } | |
| // See if the TPM will validate its own signatures | |
| if(TPM_RC_SUCCESS != CryptRsaValidateSignature(&testSig, &testObject, | |
| &testDigest)) | |
| SELF_TEST_FAILURE; | |
| // If this is RSAPSS, check the verification with known signature | |
| // Have to copy because CrytpRsaValidateSignature() eats the signature | |
| if(ALG_RSAPSS_VALUE == scheme) | |
| { | |
| MemoryCopy2B(&testSig.signature.rsapss.sig.b, (P2B)&c_RsapssKvt, | |
| sizeof(testSig.signature.rsapss.sig.t.buffer)); | |
| if(TPM_RC_SUCCESS != CryptRsaValidateSignature(&testSig, &testObject, | |
| &testDigest)) | |
| SELF_TEST_FAILURE; | |
| } | |
| return result; | |
| } | |
| //*** TestRSA() | |
| // Function uses the provided vector to indicate which tests to run. It will clear | |
| // the vector after each test is run and also clear g_toTest | |
| static TPM_RC | |
| TestRsa( | |
| TPM_ALG_ID alg, | |
| ALGORITHM_VECTOR *toTest | |
| ) | |
| { | |
| TPM_RC result = TPM_RC_SUCCESS; | |
| // | |
| switch(alg) | |
| { | |
| case ALG_NULL_VALUE: | |
| // This is the RSAEP/RSADP function. If we are processing a list, don't | |
| // need to test these now because any other test will validate | |
| // RSAEP/RSADP. Can tell this is list of test by checking to see if | |
| // 'toTest' is pointing at g_toTest. If so, this is an isolated test | |
| // an need to go ahead and do the test; | |
| if((toTest == &g_toTest) | |
| || (!TEST_BIT(ALG_RSASSA_VALUE, *toTest) | |
| && !TEST_BIT(ALG_RSAES_VALUE, *toTest) | |
| && !TEST_BIT(ALG_RSAPSS_VALUE, *toTest) | |
| && !TEST_BIT(ALG_OAEP_VALUE, *toTest))) | |
| // Not running a list of tests or no other tests on the list | |
| // so run the test now | |
| result = TestRsaEncryptDecrypt(alg, toTest); | |
| // if not running the test now, leave the bit on, just in case things | |
| // get interrupted | |
| break; | |
| case ALG_OAEP_VALUE: | |
| case ALG_RSAES_VALUE: | |
| result = TestRsaEncryptDecrypt(alg, toTest); | |
| break; | |
| case ALG_RSAPSS_VALUE: | |
| case ALG_RSASSA_VALUE: | |
| result = TestRsaSignAndVerify(alg, toTest); | |
| break; | |
| default: | |
| SELF_TEST_FAILURE; | |
| } | |
| return result; | |
| } | |
| #endif // TPM_ALG_RSA | |
| //** ECC Tests | |
| #ifdef TPM_ALG_ECC | |
| //*** LoadEccParameter() | |
| // This function is mostly for readability and type checking | |
| static void | |
| LoadEccParameter( | |
| TPM2B_ECC_PARAMETER *to, // target | |
| const TPM2B_EC_TEST *from // source | |
| ) | |
| { | |
| MemoryCopy2B(&to->b, &from->b, sizeof(to->t.buffer)); | |
| } | |
| //*** LoadEccPoint() | |
| static void | |
| LoadEccPoint( | |
| TPMS_ECC_POINT *point, // target | |
| const TPM2B_EC_TEST *x, // source | |
| const TPM2B_EC_TEST *y | |
| ) | |
| { | |
| MemoryCopy2B(&point->x.b, (TPM2B *)x, sizeof(point->x.t.buffer)); | |
| MemoryCopy2B(&point->y.b, (TPM2B *)y, sizeof(point->y.t.buffer)); | |
| } | |
| //*** TestECDH() | |
| // This test does a KVT on a point multiply. | |
| static TPM_RC | |
| TestECDH( | |
| TPM_ALG_ID scheme, // IN: for consistency | |
| ALGORITHM_VECTOR *toTest // IN/OUT: modified after test is run | |
| ) | |
| { | |
| TPMS_ECC_POINT Z; | |
| TPMS_ECC_POINT Qe; | |
| TPM2B_ECC_PARAMETER ds; | |
| TPM_RC result = TPM_RC_SUCCESS; | |
| // | |
| NOT_REFERENCED(scheme); | |
| CLEAR_BOTH(ALG_ECDH_VALUE); | |
| LoadEccParameter(&ds, &c_ecTestKey_ds); | |
| LoadEccPoint(&Qe, &c_ecTestKey_QeX, &c_ecTestKey_QeY); | |
| if(TPM_RC_SUCCESS != CryptEccPointMultiply(&Z, c_testCurve, &Qe, &ds, | |
| NULL, NULL)) | |
| SELF_TEST_FAILURE; | |
| if(!MemoryEqual2B(&c_ecTestEcdh_X.b, &Z.x.b) | |
| || !MemoryEqual2B(&c_ecTestEcdh_Y.b, &Z.y.b)) | |
| SELF_TEST_FAILURE; | |
| return result; | |
| } | |
| static TPM_RC | |
| TestEccSignAndVerify( | |
| TPM_ALG_ID scheme, | |
| ALGORITHM_VECTOR *toTest | |
| ) | |
| { | |
| OBJECT testObject; | |
| TPMT_SIGNATURE testSig; | |
| TPMT_ECC_SCHEME eccScheme; | |
| testSig.sigAlg = scheme; | |
| testSig.signature.ecdsa.hash = DEFAULT_TEST_HASH; | |
| eccScheme.scheme = scheme; | |
| eccScheme.details.anySig.hashAlg = DEFAULT_TEST_HASH; | |
| CLEAR_BOTH(scheme); | |
| CLEAR_BOTH(ALG_ECDH_VALUE); | |
| // ECC signature verification testing uses a KVT. | |
| switch(scheme) | |
| { | |
| case ALG_ECDSA_VALUE: | |
| LoadEccParameter(&testSig.signature.ecdaa.signatureR, &c_TestEcDsa_r); | |
| LoadEccParameter(&testSig.signature.ecdaa.signatureS, &c_TestEcDsa_s); | |
| break; | |
| case ALG_ECSCHNORR_VALUE: | |
| LoadEccParameter(&testSig.signature.ecdaa.signatureR, | |
| &c_TestEcSchnorr_r); | |
| LoadEccParameter(&testSig.signature.ecdaa.signatureS, | |
| &c_TestEcSchnorr_s); | |
| break; | |
| case ALG_SM2_VALUE: | |
| // don't have a test for SM2 | |
| return TPM_RC_SUCCESS; | |
| default: | |
| SELF_TEST_FAILURE; | |
| break; | |
| } | |
| TEST_DEFAULT_TEST_HASH(toTest); | |
| // Have to copy the key. This is because the size used in the test vectors | |
| // is the size of the ECC parameter for the test key while the size of a point | |
| // is TPM dependent | |
| MemoryCopy2B(&testObject.sensitive.sensitive.ecc.b, &c_ecTestKey_ds.b, | |
| sizeof(testObject.sensitive.sensitive.ecc.t.buffer)); | |
| LoadEccPoint(&testObject.publicArea.unique.ecc, &c_ecTestKey_QsX, | |
| &c_ecTestKey_QsY); | |
| testObject.publicArea.parameters.eccDetail.curveID = c_testCurve; | |
| if(TPM_RC_SUCCESS != CryptEccValidateSignature(&testSig, &testObject, | |
| (TPM2B_DIGEST *)&c_ecTestValue.b)) | |
| { | |
| //??? Don't have a valid test for ECSCORR right now because the algorithm has | |
| //??? changed and the KVT has not been updated. | |
| if(scheme != ALG_ECSCHNORR_VALUE) | |
| SELF_TEST_FAILURE; | |
| } | |
| CHECK_CANCELED; | |
| // Now sign and verify some data | |
| if(TPM_RC_SUCCESS != CryptEccSign(&testSig, &testObject, | |
| (TPM2B_DIGEST *)&c_ecTestValue, | |
| &eccScheme, NULL)) | |
| SELF_TEST_FAILURE; | |
| CHECK_CANCELED; | |
| if(TPM_RC_SUCCESS != CryptEccValidateSignature(&testSig, &testObject, | |
| (TPM2B_DIGEST *)&c_ecTestValue)) | |
| SELF_TEST_FAILURE; | |
| CHECK_CANCELED; | |
| return TPM_RC_SUCCESS; | |
| } | |
| static TPM_RC | |
| TestEcc( | |
| TPM_ALG_ID alg, | |
| ALGORITHM_VECTOR *toTest | |
| ) | |
| { | |
| TPM_RC result = TPM_RC_SUCCESS; | |
| NOT_REFERENCED(toTest); | |
| switch(alg) | |
| { | |
| case ALG_ECC_VALUE: | |
| case ALG_ECDH_VALUE: | |
| // If this is in a loop then see if another test is going to deal with | |
| // this. | |
| // If toTest is not a self-test list | |
| if((toTest == &g_toTest) | |
| // or this is the only ECC test in the list | |
| || !(TEST_BIT(ALG_ECDSA_VALUE, *toTest) | |
| || TEST_BIT(ALG_ECSCHNORR, *toTest) | |
| || TEST_BIT(ALG_SM2_VALUE, *toTest))) | |
| { | |
| result = TestECDH(alg, toTest); | |
| } | |
| break; | |
| case ALG_ECDSA_VALUE: | |
| case ALG_ECSCHNORR_VALUE: | |
| case ALG_SM2_VALUE: | |
| result = TestEccSignAndVerify(alg, toTest); | |
| break; | |
| default: | |
| SELF_TEST_FAILURE; | |
| break; | |
| } | |
| return result; | |
| } | |
| #endif // TPM_ALG_ECC | |
| //*** TestAlgorithm() | |
| // Dispatches to the correct test function for the algorithm or get a list of | |
| // testable algorithms. | |
| // | |
| // If 'toTest' is not NULL, then the test decisions are based on the algorithm | |
| // selections in 'toTest'. Otherwise, 'g_toTest' is used. When bits are clear in | |
| // 'g_toTest' they will also be cleared 'toTest'. | |
| // | |
| // If there doesn't happen to be a test for the algorithm, its associated bit is | |
| // quietly cleared. | |
| // | |
| // If 'alg' is zero (TPM_ALG_ERROR), then the toTest vector is cleared of any bits | |
| // for which there is no test (i.e. no tests are actually run but the vector is | |
| // cleared). | |
| // | |
| // Note: 'toTest' will only ever have bits set for implemented algorithms but 'alg' | |
| // can be anything. | |
| // return type: TPM_RC | |
| // TPM_RC_SUCCESS test complete | |
| // TPM_RC_CANCELED test was canceled | |
| LIB_EXPORT | |
| TPM_RC | |
| TestAlgorithm( | |
| TPM_ALG_ID alg, | |
| ALGORITHM_VECTOR *toTest | |
| ) | |
| { | |
| TPM_ALG_ID first = (alg == TPM_ALG_ERROR) ? TPM_ALG_FIRST : alg; | |
| TPM_ALG_ID last = (alg == TPM_ALG_ERROR) ? TPM_ALG_LAST : alg; | |
| BOOL doTest = (alg != TPM_ALG_ERROR); | |
| TPM_RC result = TPM_RC_SUCCESS; | |
| if(toTest == NULL) | |
| toTest = &g_toTest; | |
| // This is kind of strange. This function will either run a test of the selected | |
| // algorithm or just clear a bit if there is no test for the algorithm. So, | |
| // either this loop will be executed once for the selected algorithm or once for | |
| // each of the possible algorithms. If it is executed more than once ('alg' == | |
| // TPM_ALG_ERROR), then no test will be run but bits will be cleared for | |
| // unimplemented algorithms. This was done this way so that there is only one | |
| // case statement with all of the algorithms. It was easier to have one case | |
| // statement than to have multiple ones to manage whenever an algorithm ID is | |
| // added. | |
| for(alg = first; (alg <= last); alg++) | |
| { | |
| // if 'alg' was TPM_ALG_ERROR, then we will be cycling through | |
| // values, some of which may not be implemented. If the bit in toTest | |
| // happens to be set, then we could either generated an assert, or just | |
| // silently CLEAR it. Decided to just clear. | |
| if(!TEST_BIT(alg, g_implementedAlgorithms)) | |
| { | |
| CLEAR_BIT(alg, *toTest); | |
| continue; | |
| } | |
| // Process whatever is left. | |
| // NOTE: since this switch will only be called if the algorithm is | |
| // implemented, it is not necessary to modify this list except to comment | |
| // out the algorithms for which there is no test | |
| switch(alg) | |
| { | |
| // Symmetric block ciphers | |
| #ifdef TPM_ALG_AES | |
| case ALG_AES_VALUE: | |
| #endif | |
| #ifdef TPM_ALG_SM4 | |
| // if SM4 is implemented, its test is like other block ciphers but there | |
| // aren't any test vectors for it yet | |
| // case ALG_SM4_VALUE: | |
| #endif | |
| #ifdef TPM_ALG_CAMELLIA | |
| // no test vectors for camellia | |
| // case ALG_CAMELLIA_VALUE: | |
| #endif | |
| // Symmetric modes | |
| #ifndef TPM_ALG_CFB | |
| # error CFB is required in all TPM implementations | |
| #endif // !TPM_ALG_CFB | |
| case ALG_CFB_VALUE: | |
| if(doTest) | |
| result = TestSymmetric(alg, toTest); | |
| break; | |
| #ifdef TPM_ALG_CTR | |
| case ALG_CTR_VALUE: | |
| #endif // TPM_ALG_CRT | |
| #ifdef TPM_ALG_OFB | |
| case ALG_OFB_VALUE: | |
| #endif // TPM_ALG_OFB | |
| #ifdef TPM_ALG_CBC | |
| case ALG_CBC_VALUE: | |
| #endif // TPM_ALG_CBC | |
| #ifdef TPM_ALG_ECB | |
| case ALG_ECB_VALUE: | |
| #endif | |
| if(doTest) | |
| result = TestSymmetric(alg, toTest); | |
| else | |
| // If doing the initialization of g_toTest vector, only need | |
| // to test one of the modes for the symmetric algorithms. If | |
| // initializing for a SelfTest(FULL_TEST), allow all the modes. | |
| if(toTest == &g_toTest) | |
| CLEAR_BIT(alg, *toTest); | |
| break; | |
| #ifndef TPM_ALG_HMAC | |
| # error HMAC is required in all TPM implementations | |
| #endif | |
| case ALG_HMAC_VALUE: | |
| // Clear the bit that indicates that HMAC is required because | |
| // HMAC is used as the basic test for all hash algorithms. | |
| CLEAR_BOTH(alg); | |
| // Testing HMAC means test the default hash | |
| if(doTest) | |
| TestHash(DEFAULT_TEST_HASH, toTest); | |
| else | |
| // If not testing, then indicate that the hash needs to be | |
| // tested because this uses HMAC | |
| SET_BOTH(DEFAULT_TEST_HASH); | |
| break; | |
| #ifdef TPM_ALG_SHA1 | |
| case ALG_SHA1_VALUE: | |
| #endif // TPM_ALG_SHA1 | |
| #ifdef TPM_ALG_SHA256 | |
| case ALG_SHA256_VALUE: | |
| #endif // TPM_ALG_SHA256 | |
| #ifdef TPM_ALG_SHA384 | |
| case ALG_SHA384_VALUE: | |
| #endif // TPM_ALG_SHA384 | |
| #ifdef TPM_ALG_SHA512 | |
| case ALG_SHA512_VALUE: | |
| #endif // TPM_ALG_SHA512 | |
| // if SM3 is implemented its test is like any other hash, but there | |
| // aren't any test vectors yet. | |
| #ifdef TPM_ALG_SM3_256 | |
| // case ALG_SM3_256_VALUE: | |
| #endif // TPM_ALG_SM3_256 | |
| if(doTest) | |
| result = TestHash(alg, toTest); | |
| break; | |
| // RSA-dependent | |
| #ifdef TPM_ALG_RSA | |
| case ALG_RSA_VALUE: | |
| CLEAR_BOTH(alg); | |
| if(doTest) | |
| result = TestRsa(TPM_ALG_NULL, toTest); | |
| else | |
| SET_BOTH(TPM_ALG_NULL); | |
| break; | |
| case ALG_RSASSA_VALUE: | |
| case ALG_RSAES_VALUE: | |
| case ALG_RSAPSS_VALUE: | |
| case ALG_OAEP_VALUE: | |
| case ALG_NULL_VALUE: // used or RSADP | |
| if(doTest) | |
| result = TestRsa(alg, toTest); | |
| break; | |
| #endif // TPM_ALG_RSA | |
| #ifdef TPM_ALG_ECC | |
| // ECC dependent but no tests | |
| // case ALG_ECDAA_VALUE: | |
| // case ALG_ECMQV_VALUE: | |
| // case ALG_KDF1_SP800_56a_VALUE: | |
| // case ALG_KDF2_VALUE: | |
| // case ALG_KDF1_SP800_108_VALUE: | |
| // case ALG_MGF1_VALUE: | |
| case ALG_ECC_VALUE: | |
| CLEAR_BOTH(alg); | |
| if(doTest) | |
| result = TestEcc(ALG_ECDH_VALUE, toTest); | |
| else | |
| SET_BOTH(ALG_ECDH_VALUE); | |
| break; | |
| case ALG_ECDSA_VALUE: | |
| case ALG_ECDH_VALUE: | |
| case ALG_ECSCHNORR_VALUE: | |
| // case ALG_SM2_VALUE: | |
| if(doTest) | |
| result = TestEcc(alg, toTest); | |
| break; | |
| #endif // TPM_ALG_ECC | |
| default: | |
| CLEAR_BIT(alg, *toTest); | |
| break; | |
| } | |
| if(result != TPM_RC_SUCCESS) | |
| break; | |
| } | |
| return result; | |
| } | |
| #endif // SELF_TESTS |