TPMCmd/tpm/src/main/ExecCommand.c

/* Microsoft Reference Implementation for TPM 2.0
 *
 *  The copyright in this software is being made available under the BSD License,
 *  included below. This software may be subject to other third party and
 *  contributor rights, including patent rights, and no such rights are granted
 *  under this license.
 *
 *  Copyright (c) Microsoft Corporation
 *
 *  All rights reserved.
 *
 *  BSD License
 *
 *  Redistribution and use in source and binary forms, with or without modification,
 *  are permitted provided that the following conditions are met:
 *
 *  Redistributions of source code must retain the above copyright notice, this list
 *  of conditions and the following disclaimer.
 *
 *  Redistributions in binary form must reproduce the above copyright notice, this
 *  list of conditions and the following disclaimer in the documentation and/or
 *  other materials provided with the distribution.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ""AS IS""
 *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 *  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 *  ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 *  (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
//** Introduction
//
// This file contains the entry function ExecuteCommand() which provides the main
// control flow for TPM command execution.

//** Includes

#include "Tpm.h"
#include "ExecCommand_fp.h"

// Uncomment this next #include if doing static command/response buffer sizing
// #include "CommandResponseSizes_fp.h"

//** ExecuteCommand()
//
// The function performs the following steps.
//
//  a)  Parses the command header from input buffer.
//  b)  Calls ParseHandleBuffer() to parse the handle area of the command.
//  c)  Validates that each of the handles references a loaded entity.
//  d)  Calls ParseSessionBuffer () to:
//      1)  unmarshal and parse the session area;
//      2)  check the authorizations; and
//      3)  when necessary, decrypt a parameter.
//  e)  Calls CommandDispatcher() to:
//      1)  unmarshal the command parameters from the command buffer;
//      2)  call the routine that performs the command actions; and
//      3)  marshal the responses into the response buffer.
//  f)  If any error occurs in any of the steps above create the error response
//      and return.
//  g)  Calls BuildResponseSession() to:
//      1)  when necessary, encrypt a parameter
//      2)  build the response authorization sessions
//      3)  update the audit sessions and nonces
//  h)  Calls BuildResponseHeader() to complete the construction of the response.
//
// 'responseSize' is set by the caller to the maximum number of bytes available in
// the output buffer. ExecuteCommand will adjust the value and return the number
// of bytes placed in the buffer.
//
// 'response' is also set by the caller to indicate the buffer into which
//  ExecuteCommand is to place the response.
//
//  'request' and 'response' may point to the same buffer
//
// Note: As of February, 2016, the failure processing has been moved to the 
// platform-specific code. When the TPM code encounters an unrecoverable failure, it
// will SET g_inFailureMode and call _plat__Fail(). That function should not return
// but may call ExecuteCommand().
//
LIB_EXPORT void
ExecuteCommand(
    uint32_t         requestSize,   // IN: command buffer size
    unsigned char   *request,       // IN: command buffer
    uint32_t        *responseSize,  // IN/OUT: response buffer size
    unsigned char   **response      // IN/OUT: response buffer
    )
{
    // Command local variables
    UINT32               commandSize;
    COMMAND              command;

    // Response local variables
    UINT32               maxResponse = *responseSize;
    TPM_RC               result;            // return code for the command

// This next function call is used in development to size the command and response
// buffers. The values printed are the sizes of the internal structures and
// not the sizes of the canonical forms of the command response structures. Also,
// the sizes do not include the tag, command.code, requestSize, or the authorization
// fields.
//CommandResponseSizes();
    // Set flags for NV access state. This should happen before any other
    // operation that may require a NV write. Note, that this needs to be done
    // even when in failure mode. Otherwise, g_updateNV would stay SET while in
    // Failure mode and the NV would be written on each call.
    g_updateNV = UT_NONE;
    g_clearOrderly = FALSE;
    if(g_inFailureMode)
    {
        // Do failure mode processing
        TpmFailureMode(requestSize, request, responseSize, response);
        return;
    }
    // Query platform to get the NV state.  The result state is saved internally
    // and will be reported by NvIsAvailable(). The reference code requires that
    // accessibility of NV does not change during the execution of a command.
    // Specifically, if NV is available when the command execution starts and then
    // is not available later when it is necessary to write to NV, then the TPM
    // will go into failure mode.
    NvCheckState();

    // Due to the limitations of the simulation, TPM clock must be explicitly
    // synchronized with the system clock whenever a command is received.
    // This function call is not necessary in a hardware TPM. However, taking
    // a snapshot of the hardware timer at the beginning of the command allows
    // the time value to be consistent for the duration of the command execution.
    TimeUpdateToCurrent();

    // Any command through this function will unceremoniously end the
    // _TPM_Hash_Data/_TPM_Hash_End sequence.
    if(g_DRTMHandle != TPM_RH_UNASSIGNED)
        ObjectTerminateEvent();

    // Get command buffer size and command buffer.
    command.parameterBuffer = request;
    command.parameterSize = requestSize;

    // Parse command header: tag, commandSize and command.code.
    // First parse the tag. The unmarshaling routine will validate
    // that it is either TPM_ST_SESSIONS or TPM_ST_NO_SESSIONS.
    result = TPMI_ST_COMMAND_TAG_Unmarshal(&command.tag,
                                           &command.parameterBuffer,
                                           &command.parameterSize);
    if(result != TPM_RC_SUCCESS)
        goto Cleanup;
    // Unmarshal the commandSize indicator.
    result = UINT32_Unmarshal(&commandSize,
                              &command.parameterBuffer,
                              &command.parameterSize);
    if(result != TPM_RC_SUCCESS)
        goto Cleanup;
    // On a TPM that receives bytes on a port, the number of bytes that were
    // received on that port is requestSize it must be identical to commandSize.
    // In addition, commandSize must not be larger than MAX_COMMAND_SIZE allowed
    // by the implementation. The check against MAX_COMMAND_SIZE may be redundant
    // as the input processing (the function that receives the command bytes and
    // places them in the input buffer) would likely have the input truncated when
    // it reaches MAX_COMMAND_SIZE, and requestSize would not equal commandSize.
    if(commandSize != requestSize || commandSize > MAX_COMMAND_SIZE)
    {
        result = TPM_RC_COMMAND_SIZE;
        goto Cleanup;
    }
    // Unmarshal the command code.
    result = TPM_CC_Unmarshal(&command.code, &command.parameterBuffer,
                              &command.parameterSize);
    if(result != TPM_RC_SUCCESS)
        goto Cleanup;
    // Check to see if the command is implemented.
    command.index = CommandCodeToCommandIndex(command.code);
    if(UNIMPLEMENTED_COMMAND_INDEX == command.index)
    {
        result = TPM_RC_COMMAND_CODE;
        goto Cleanup;
    }
#if  FIELD_UPGRADE_IMPLEMENTED  == YES
    // If the TPM is in FUM, then the only allowed command is
    // TPM_CC_FieldUpgradeData.
    if(IsFieldUgradeMode() && (command.code != TPM_CC_FieldUpgradeData))
    {
        result = TPM_RC_UPGRADE;
        goto Cleanup;
    }
    else
#endif
    // Excepting FUM, the TPM only accepts TPM2_Startup() after
    // _TPM_Init. After getting a TPM2_Startup(), TPM2_Startup()
    // is no longer allowed.
    if((!TPMIsStarted() && command.code != TPM_CC_Startup)
        || (TPMIsStarted() && command.code == TPM_CC_Startup))
    {
        result = TPM_RC_INITIALIZE;
        goto Cleanup;
    }
// Start regular command process.
    NvIndexCacheInit();
    // Parse Handle buffer.
    result = ParseHandleBuffer(&command);
    if(result != TPM_RC_SUCCESS)
        goto Cleanup;
    // All handles in the handle area are required to reference TPM-resident
    // entities.
    result = EntityGetLoadStatus(&command);
    if(result != TPM_RC_SUCCESS)
        goto Cleanup;
    // Authorization session handling for the command.
    ClearCpRpHashes(&command);
    if(command.tag == TPM_ST_SESSIONS)
    {
        // Find out session buffer size.
        result = UINT32_Unmarshal((UINT32 *)&command.authSize,
                                  &command.parameterBuffer,
                                  &command.parameterSize);
        if(result != TPM_RC_SUCCESS)
            goto Cleanup;
        // Perform sanity check on the unmarshaled value. If it is smaller than
        // the smallest possible session or larger than the remaining size of
        // the command, then it is an error. NOTE: This check could pass but the
        // session size could still be wrong. That will be determined after the
        // sessions are unmarshaled.
        if(command.authSize < 9
           || command.authSize > command.parameterSize)
        {
            result = TPM_RC_SIZE;
            goto Cleanup;
        }
        command.parameterSize -= command.authSize;

        // The actions of ParseSessionBuffer() are described in the introduction.
        // As the sessions are parsed command.parameterBuffer is advanced so, on a
        // successful return, command.parameterBuffer should be pointing at the
        // first byte of the parameters.
        result = ParseSessionBuffer(&command);
        if(result != TPM_RC_SUCCESS)
            goto Cleanup;
    }
    else
    {
        command.authSize = 0;
        // The command has no authorization sessions.
        // If the command requires authorizations, then CheckAuthNoSession() will
        // return an error.
        result = CheckAuthNoSession(&command);
        if(result != TPM_RC_SUCCESS)
            goto Cleanup;
    }
    // Set up the response buffer pointers. CommandDispatch will marshal the
    // response parameters starting at the address in command.responseBuffer.
//*response = MemoryGetResponseBuffer(command.index);
    // leave space for the command header
    command.responseBuffer = *response + STD_RESPONSE_HEADER;

    // leave space for the parameter size field if needed
    if(command.tag == TPM_ST_SESSIONS)
        command.responseBuffer += sizeof(UINT32);
    if(IsHandleInResponse(command.index))
        command.responseBuffer += sizeof(TPM_HANDLE);

    // CommandDispatcher returns a response handle buffer and a response parameter
    // buffer if it succeeds. It will also set the parameterSize field in the
    // buffer if the tag is TPM_RC_SESSIONS.
    result = CommandDispatcher(&command);
    if(result != TPM_RC_SUCCESS)
        goto Cleanup;

    // Build the session area at the end of the parameter area.
    BuildResponseSession(&command);

Cleanup:
    if(g_clearOrderly == TRUE 
        && NV_IS_ORDERLY)
    {
#if USE_DA_USED
        gp.orderlyState = g_daUsed ? SU_DA_USED_VALUE : SU_NONE_VALUE;
#else
        gp.orderlyState = SU_NONE_VALUE;
#endif
        NV_SYNC_PERSISTENT(orderlyState);
    }
    // This implementation loads an "evict" object to a transient object slot in
    // RAM whenever an "evict" object handle is used in a command so that the
    // access to any object is the same. These temporary objects need to be
    // cleared from RAM whether the command succeeds or fails.
    ObjectCleanupEvict();

    // The parameters and sessions have been marshaled. Now tack on the header and
    // set the sizes
    BuildResponseHeader(&command, *response, result);

    // Try to commit all the writes to NV if any NV write happened during this
    // command execution. This check should be made for both succeeded and failed
    // commands, because a failed one may trigger a NV write in DA logic as well.
    // This is the only place in the command execution path that may call the NV
    // commit. If the NV commit fails, the TPM should be put in failure mode.
    if((g_updateNV != UT_NONE) && !g_inFailureMode)
    {
        if(g_updateNV == UT_ORDERLY)
            NvUpdateIndexOrderlyData();
        if(!NvCommit())
            FAIL(FATAL_ERROR_INTERNAL);
        g_updateNV = UT_NONE;
    }
    pAssert((UINT32)command.parameterSize <= maxResponse);

    // Clear unused bits in response buffer.
    MemorySet(*response + *responseSize, 0, maxResponse - *responseSize);

    // as a final act, and not before, update the response size.
    *responseSize = (UINT32)command.parameterSize;

    return;
}